Code No.
LIT-1900866
Issued January 20, 2016
VA-748x Electric Valve Actuators
Description • Auto-commissioning simplifies installation,
since models require no adjustments in the
VA-748x Series Electric Valve Actuators field
provide floating or proportional control in
• Auto-shutoff actuator motor extends
HVAC applications. The compact design of
actuator life by reducing drive time and
this actuator series makes it ideal for
excessive motor wear
installations in confined locations, such as fan
• Durable, heat-stabilized, plastic resin
coil applications.
enclosure allows the actuator to be used in
The VA-748x Series Actuator is designed for applications with fluid temperatures up to
field mounting onto the terminal unit valves 203°F (95°C)
made by Johnson Controls and its • Actuator can be mounted after the valve
competitors. Due to the innovative concept of body is piped, simplifying installation and
auto stroke detection, the VA-748x actuator providing application flexibility
can be installed over most of the conventional VA-7480 Electric Valve Actuator
• Compact design allows for installation in
terminal unit valves in the market and pressure confined locations, such as fan coil
independent control valves with variable applications Repair Information
strokes.
• Operating status LED provides direct, If the VA-748x Electric Actuator fails to
Refer to the VA-748x Electric Valve Actuator visual indication of the actuator operating operate within its specifications, replace the
Product Bulletin (LIT-12011893) for important status unit. For a replacement VA-748x Electric
product application information. • Actuator can be rotated after it is mounted Valve Actuator, contact the nearest
on the valve body, simplifying installation Johnson Controls® representative.
Features by allowing the actuator wiring entry to be
located in any direction
Selection Chart
Code Number Power Supply Control Type Actuator Speed Mounting Thread Nut Cable Length (Factory Mounted)
VA-7480-0312 24 VAC Floating 13 s/mm M28 x 1.5 118 in. (3 m)
VA-7482-0312 24 VAC/VDC Proportional 8 s/mm M28 x 1.5 118 in. (3 m)
VA-7482-8002-RA 24 VAC/VDC Proportional 8 s/mm M30 x 1.5 59 in. (1.5 m)
VA-7482-9002-RA 24 VAC/VDC Proportional 8 s/mm M30 x 1.5 59 in. (1.5 m)
Technical Specifications
VA-748x Series Electric Valve Actuators
Power Requirements VA-7480-0312 24 VAC ±15% at 50/60 Hz; 2.5 VA at maximum power supply; Class 2
VA-7482-xxx2 24 VAC ±15% at 50/60 Hz; 24 VDC ±15% at 2.5 VA at maximum power supply; Class 2
Input Signal VA-7480-0312 24 VAC, 50/60 Hz
VA-7482-xxx2 0 to 10 VDC
Input Signal Adjustments VA-7480-0312 None
VA-7482-xxx2 Input Signal: 0 to 10 VDC, 2 to 10 VDC, 0 to 5 VDC, 5 to 10 VDC, 0 to 20 mA, or 4 to 20 mA
Direction: Direct (drive down) or reverse (drive up) with input signal increase
Input Impedance VA-7480-0312 3,900 ohms
VA-7482-xxx2 100,000 ohms
VA-7480-0312 18 AWG cable; 118 in. (3 m) long
VA-7482-0312
Electrical Connections
VA-7482-8002-RA 18 AWG cable; 59 in. (1.5 m) long
VA-7482-9002-RA
Threaded coupling for Johnson Controls VG4000, VG5000, M28x1, and M28x5 Series Zone Valves
Mechanical Connections Threaded coupling for Johnson Controls VG6000, V5000, VP100, M30x1, and M30x5 Series Zone
Valves
Protection NEMA 2, IP43
VA-7480-0312
21.5 lb (96 N) minimum
VA-7482-0312
Output Force
VA-7482-8002-RA 31.4 lb (140 N) minimum
VA-7482-9002-RA
Mechanical Stroke 0.25 in. (6.3 mm) maximum
Full Stroke Cycle Time Floating 13 s/mm, proportional 8 s/mm
VA-7480-0312 250,000
VA-7482-0312
Full Stroke Cycles
VA-7482-8002-RA 150,000
VA-7482-9002-RA
Audible Noise Rating <30 dBA
Fluid Temperature Limits 35 to 203°F (2 to 95°C)
Ambient Operating Conditions 32 to 122°F (0 to 50°C), noncondensing
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2016 Johnson Controls, Inc. www.johnsoncontrols.com
1
VA-748x Electric Valve Actuators (Continued)
VA-748x Series Electric Valve Actuators
Ambient Storage Conditions -4 to 149°F (-20 to 65°C), noncondensing
Compliance United States Tested per UL2043. Suitable for Use in Other Environmental Air Space (Plenums) in Accordance with
Section 300.22 (C) of the National Electrical Code. UL 60730-1 Listed Type 2 Enclosure, File E194024
XAPX XAPX7
Canada CSA C22.2 No. 139 Certified, File LR85083, Class 3221 01
Europe CE Mark – Johnson Controls, Inc. declares that this product is in compliance with the essential
requirements and other relevant provisions of the EMC Directive 2004/108/EC and Low Voltage
Directive 2006/95/EC.
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2016 Johnson Controls, Inc. www.johnsoncontrols.com
