en

ZXA10 C300&C320 Product

Description
V2.0.1P3
 ZXA10 C300&C320 Product Description

ZXA10 C300&C320 Product Description

Version Date Author Reviewer Notes

V1.0 2015/4/15 He Jun Sun YanFeng Not open to the third party

V1.1 2016/9/22 Han Yichun Sun YanFeng/He Jun Revise the card configuration of table 2-4

Revise XG-PON1 to XG-PON,

V1.2 2017/1/14 Han Yichun Sun YanFeng Delete Class C++ optical module
Revise table 8-11 & 8-12.
Revise maximum receive sensitivity of
V1.3 2017/1/19 Han Yichun Sun YanFeng
10GE interface.

© 2017 ZTE Corporation. All rights reserved.

ZTE CONFIDENTIAL: This document contains proprietary information of ZTE and is not to be disclosed or used
without the prior written permission of ZTE.
Due to update and improvement of ZTE products and technologies, information in this document is subjected to
change without notice.

ZTE Confidential & Proprietary 1

ZXA10 C300&C320 Product Description

TABLE OF CONTENTS

1 Product Position and Features ......................................................................... 9

1.1 Product Position ................................................................................................... 9
1.2 Product Features ............................................................................................... 10

2 Product Architecture ....................................................................................... 12

2.1 Hardware Architecture ....................................................................................... 12
2.1.1 ZXA10 C300 Hardware Architecture .................................................................. 12
2.1.2 ZXA10 C320 Hardware Architecture .................................................................. 16
2.1.3 Cards ................................................................................................................. 17
2.1.4 Cabinets ............................................................................................................ 28
2.2 Logical Architecture ........................................................................................... 36
2.3 Software Architecture ......................................................................................... 38

3 Operation and Maintenance System .............................................................. 40

3.1 Networking ......................................................................................................... 40
3.2 Functions ........................................................................................................... 41

4 Product Features ............................................................................................. 44

4.1 Access Features ................................................................................................ 44
4.2 Layer 2 Features ................................................................................................ 51
4.3 MPLS Features .................................................................................................. 55
4.4 Layer 3 Features ................................................................................................ 60
4.5 IPv6 Features .................................................................................................... 62
4.6 Multicast Features.............................................................................................. 64
4.7 Networking Features .......................................................................................... 65
4.8 Security Features ............................................................................................... 66
4.9 Clock Features ................................................................................................... 71
4.10 QoS Features .................................................................................................... 72
4.11 TDM Service Features ....................................................................................... 74
4.12 EOAM Features ................................................................................................. 75
4.13 Reliability and Redundancy Features ................................................................. 77
4.14 Energy Saving Features..................................................................................... 79
4.15 OTDR Features ................................................................................................. 79

5 Networking Applications ................................................................................ 81

5.1 FTTH Networking Application............................................................................. 81
5.2 FTTB Network Application ................................................................................. 82
5.3 FTTO Networking Application ............................................................................ 84
5.4 FTTC Networking Application............................................................................. 85

2 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

5.5 FTTM Networking Application ............................................................................ 86

5.6 FTTdp Networking Application ........................................................................... 89
5.7 FTTCable Networking Application ...................................................................... 90

6 Interfaces ......................................................................................................... 92
6.1 Maintenance Interfaces ...................................................................................... 92
6.2 Service Interfaces .............................................................................................. 93

7 Reliability Design ............................................................................................ 95

7.1 Hardware Reliability ........................................................................................... 95
7.2 Software Reliability ............................................................................................ 96
7.3 Data Reliability ................................................................................................... 97
7.4 Networking Reliability ......................................................................................... 97

8 Technical Specifications ................................................................................. 98

8.1 Physical Specifications....................................................................................... 98
8.2 Performance Specifications ............................................................................. 102
8.3 Power Consumption......................................................................................... 105
8.4 Interface Specifications .................................................................................... 109
8.4.1 XG-PON Interface ............................................................................................ 109
8.4.2 GPON Interface ............................................................................................... 110
8.4.3 10GE Interface................................................................................................. 111
8.4.4 GE Interface..................................................................................................... 114
8.4.5 FE Interface ..................................................................................................... 117
8.4.6 E1/T1 Interface ................................................................................................ 119
8.4.7 STM-N Interface............................................................................................... 119
8.4.8 Clock Interface ................................................................................................. 121
8.5 Reliability Specifications................................................................................... 123

9 Environment Requirements .......................................................................... 124

9.1 Power Requirements ....................................................................................... 124
9.2 Operating Environment .................................................................................... 126
9.3 Transportation Environment ............................................................................. 128
9.4 Storage Environment ....................................................................................... 131

10 Protocols and Standards .............................................................................. 134

10.1 Software Standards ......................................................................................... 134
10.2 Hardware Interface Standards ......................................................................... 143
10.3 Structure and Reliability Standards .................................................................. 144

11 Glossary ......................................................................................................... 148

ZTE Confidential & Proprietary 3

ZXA10 C300&C320 Product Description

4 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

FIGURES

Figure 1-1 ZXA10 C300/C320 Networking Diagram ............................................................ 9

Figure 2-1 ZXA10 C300 Shelf Appearance ........................................................................13
Figure 2-2 ETSI 21-inch Shelf Configuration ......................................................................14
Figure 2-3 IEC 19-inch Shelf Configuration ........................................................................15
Figure 2-4 ZXA10 C320 Shelf Appearance ........................................................................16
Figure 2-5 ZXA10 C320 Shelf Configuration ......................................................................16
Figure 2-6 Indoor Cabinet Appearance ..............................................................................29
Figure 2-7 Indoor Cabinet Configuration ............................................................................30
Figure 2-8 EC40EB Cabinet Appearance...........................................................................31
Figure 2-9 EC40EB Cabinet Typical Configuration ............................................................32
Figure 2-10 EC70E Cabinet Appearance ...........................................................................33
Figure 2-11 EC70E Cabinet Typical Configuration .............................................................34
Figure 2-12 EC90EB Cabinet Appearance.........................................................................35
Figure 2-13 EC90EB Cabinet Typical Configuration...........................................................36
Figure 2-14 ZXA10 C300 Hardware Logical Diagram ........................................................37
Figure 2-15 Service Forwarding Channels .........................................................................38
Figure 2-16 ZXA10 C300 Software Architecture ................................................................39
Figure 3-1 Maintenance Networking Diagram in CLI Mode ................................................40
Figure 3-2 Maintenance Networking Diagram in NM Mode ................................................41
Figure 5-1 FTTH Networking Diagram ...............................................................................82
Figure 5-2 FTTB Networking Diagram ...............................................................................83
Figure 5-3 FTTO Networking Diagram ...............................................................................84
Figure 5-4 FTTC Networking Diagram ...............................................................................85
Figure 5-5 FTTM Bearing Macro Cell Backhaul Networking Diagram ................................87
Figure 5-6 FTTM Bearingsmallcell Backhaul Networking Diagram .....................................88
Figure 5-7 FTTdp Networking Diagram ..............................................................................89
Figure 5-8 FTTCable Application in FTTB Scenario ...........................................................91
Figure 5-9 FTTCable Application in FTTC Scenario ...........................................................92

ZTE Confidential & Proprietary 5

ZXA10 C300&C320 Product Description

TABLES

Table 2-1 ETSI 21-inch Shelf Configuration .......................................................................14

Table 2-2 IEC 19-Inch Shelf Configuration .........................................................................15
Table 2-3 ZXA10 C300/C320 Card List ..............................................................................17
Table 2-4 ZXA10 C300/C320 Card Configuration ..............................................................25
Table 2-5 ZXA10 C300/C320 Cabinet Description .............................................................28
Table 2-6 Module Function Description of Logical Architecture ..........................................37
Table 2-7 Module Function Description of Software Architecture .......................................39
Table 4-1 Access Features ................................................................................................44
Table 4-2 Layer 2 Features ................................................................................................51
Table 4-3 MPLS Features ..................................................................................................55
Table 4-4 Layer 3 Features ................................................................................................60
Table 4-5 IPv6 Features ....................................................................................................62
Table 4-6 Multicast Features..............................................................................................64
Table 4-7 Networking Features ..........................................................................................65
Table 4-8 Security Features ...............................................................................................67
Table 4-9 Clock Features ...................................................................................................71
Table 4-10 QoS Features ..................................................................................................72
Table 4-11 TDM Service Features .....................................................................................74
Table 4-12 eOAM Features................................................................................................75
Table 4-13 Reliability and Redundancy Features ...............................................................77
Table 4-14 Energy Saving Features...................................................................................79
Table 4-15 GPON Built-in OTDR Features ........................................................................80
Table 6-1 Maintenance Interfaces Description ...................................................................92
Table 6-2 Service Interfaces Description............................................................................93
Table 8-1 Indoor Cabinet Physical Specifications ..............................................................98
Table 8-2 Outdoor Cabinet Physical Specifications ............................................................98

6 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Table 8-3 shelf Physical Specifications ..............................................................................99

Table 8-4 Physical Specifications.......................................................................................99
Table 8-5 Fan Box Physical Specifications ......................................................................101
Table 8-6 System Performance Specifications .................................................................102
Table 8-7 System Configuration .......................................................................................103
Table 8-8 Management Interfaces ...................................................................................103
Table 8-9 ZXA10 C300 Uplink t Interfaces .......................................................................104
Table 8-10 ZXA10 C320 Uplink t Interfaces .....................................................................105
Table 8-11 ZXA10 C300/C320 Access Interfaces ............................................................105
Table 8-12 ZXA10 C300 Shelf Power Consumption.........................................................106
Table 8-13 ZXA10 C320 Shelf Power Consumption.........................................................107
Table 8-14 Card Power Consumption ..............................................................................107
Table 8-15 Fan Box Power Consumption.........................................................................108
Table 8-16 XG-PON Optical Module Specifications .........................................................109
Table 8-17 GPON Optical Module Specifications .............................................................110
Table 8-18 Single Channel Dual Fiber Bidirectional 10GE Optical Module Specifications 112
Table 8-19 Single Channel Single Fiber Bidirectional 10GE Optical Module Specifications
...........................................................................................................................................113
Table 8-20 Single Channel Dual Fiber Bidirectional GE Optical Module Specifications ....114
Table 8-21 Single Channel Single Fiber Bidirectional GE Optical Module Specifications .115
Table 8-22 Dual Channel Single Fiber Bidirectional GE Optical Module Specifications ....116
Table 8-23 GE Electrical Interface Specifications .............................................................116
Table 8-24 Single Channel Dual Fiber Bidirectional FE Optical Module Specifications ....117
Table 8-25 Dual Channel Single Fiber Bidirectional FE Optical Module Specifications ....118
Table 8-26 E1/T1 Interface Specifications........................................................................119
Table 8-27 Single Channel Dual Fiber Bidirectional STM-1 Optical Module Specifications
...........................................................................................................................................119
Table 8-28 STM-4 Optical Module Specifications.............................................................120
Table 8-29 T12 Interface Specifications .............................................................................121
Table 8-30 E12 Interface Specifications ...........................................................................122
Table 8-31 1PPS + TOD Interface Specifications.............................................................123

ZTE Confidential & Proprietary 7

ZXA10 C300&C320 Product Description

Table 8-32 Reliability Specifications .................................................................................124

Table 9-1 ZXA10 C300/C320 Power Requirements .........................................................124
Table 9-2 Indoor Cabinet Power Requirements ...............................................................125
Table 9-3 Outdoor Cabinet Power Requirements .............................................................125
Table 9-4 Operating Climate Requirements .....................................................................126
Table 9-5 Operating Mechanical Active Materials Concentration .....................................127
Table 9-6 Operating Chemical Active Materials Concentration ........................................127
Table 9-7 Operating Mechanical Stress Requirements ....................................................128
Table 9-8 Transportation Climate Requirements ..............................................................128
Table 9-9 Transportation Mechanical Active Materials Concentration ..............................130
Table 9-10 Transportation Chemical Active Materials Concentration ...............................130
Table 9-11 Transportation Mechanical Stress Requirements ...........................................131
Table 9-12 Storage Climate Requirements ......................................................................132
Table 9-13 Storage Mechanical Active Materials Concentration ......................................133
Table 9-14 Storage Chemical Active Materials Concentration ..........................................133
Table 9-15 Storage Mechanical Stress Requirements .....................................................134
Table 10-1 Software Standards .......................................................................................134
Table 10-2 Hardware Interface Standards .......................................................................144
Table 10-3 Structure and Reliability Standards ................................................................145

8 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

1 Product Position and Features

1.1 Product Position

The ZXA10 C300 and ZXA10 C320 are the main optical access products of ZTE. The
ZXA10 C300 is a large-capacity AN equipment and suitable for optical access application
of high-density subscribers, while the ZXA10 C320 is a small-capacity AN equipment low
density device and suitable for optical access application of low-density subscribers. The
ZXA10 C300 and ZXA10 C320 share the same interface cards on user side and support
similar functions.

Figure 1-1 shows the ZXA10 C300/C320 networking diagram (OLT represents ZXA10
C300/C320).

Figure 1-1 ZXA10 C300/C320 Networking Diagram

BSC: Base Station Controller RNC: Radio Network Controller

SFU: Single Family Unit HGU: Home Gateway Unit

SBU: Single Business Unit DPU: Distribution Point Unit

ZTE Confidential & Proprietary 9

ZXA10 C300&C320 Product Description

VOD: Video On Demand TDM: Time Division Multiplexing

OTT: Over The Top BTS: Base Transceiver Station

SS: SoftSwitch IMS: IP Multimedia Subsystem

MDU: Multi-Dwelling Unit MTU: Multi-Tenant Unit

EMS: Element Management System BOSS: Business and Operating Support

System

ZXA10 C300 and ZXA10 C320 fulfil the following functions:

 PON OLT: supports GPON, XG-PON and P2P access, supports FTTH, FTTB,
FTTC, FTTdp, FTTM networking in cooperation with different types of ONUs.

 Layer 2 optical access platform: supports Ethernet uplink and downlink, supports
convergence and forwarding of layer 2 Ethernet service traffics.

 Layer 3 optical access platform: supports layer 3 routing, supports convergence and
forwarding of IP service traffics, implements the gateway function.

 Service access control: implements access control, traffic control and service
bearing for each subscriber and each service, subscribers include family
subscribers and enterprise subscribers, services include voice, the Internet, IPTV,
L2 VPN and MEF.

 GPON built-in OTDR: supports PON ODN maintenance an detection.

1.2 Product Features

The ZXA10 C300 features the following:

 Multi-play service access: supports HSIA, VoIP, and video (including IPTV and
VOD) access, CATV access based on the third wavelength, and TDM service
access based on CES, satisfying the requirements of common subscriber and
business subscribers.

10 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

 High density ports: supports 16 service card slots, 16-port GPON interface card,
48-port P2P interface card, and 8-port XG-PON interface card; supports
independent uplink cards and maximum 16 × 10GE uplink capacity.

 Integrated platform of multiple access technology: supports GPON, XG-PON, P2P

and Ethernet access technologies.

 Layer 2 and layer 3 capacity: supports process of layer 2 switching, VLAN service,
layer 3 routing, MPLS, supports flexible configuration and multiple application
scenarios.

 Multiservice access: supports multiservice access of TDM, voice, the Internet, IPTV,
VPN, mobile backhaul.

 Perfect service and equipment protection: supports TypeB/C PON protection,

supports Ethernet service protection, supports redundant protection of switching
control cards, power cards, fans, and uplink interfaces.

 Comprehensive security features: supports comprehensive features on equipment

security, system security, network security and service security.

The ZXA10 C320 features the following:

 Small size and easy to install: the compact 2U equipment is easy to install and
saves space.

 Card compatibility: interface cards of ZXA10 C320 are compatible with ZXA10 C300,
which cost-effective.

 Consistent functions: ZXA10 C320 and ZXA10 C300 support consistent functions,
which is convenient for maintenance.

 Coalition networking: ZXA10 C320 and ZXA10 C300 support ring networking and
chain networking by coalition to implement access of long distance and high
reliability service.

ZTE Confidential & Proprietary 11

ZXA10 C300&C320 Product Description

2 Product Architecture

2.1 Hardware Architecture

2.1.1 ZXA10 C300 Hardware Architecture

Shelf Appearance

The ZXA10 C300 supports two types of shelves:

 ETSI 21–inch shelf

 IEC 19–inch shelf

The two shelves are different in width and slot number. The two shelves share the same
cards , except the backplanes and fan boxes.

Figure 2-1 shows the ZXA10 C300 shelf appearance (takes IEC 19-inch shelf as an
example).

12 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Figure 2-1 ZXA10 C300 Shelf Appearance

Shelf Configuration

The shelf consists of two parts: 9 U service card area an 1 U fan area.

 9 U service card area

 21-inch shelf

Figure 2-2 shows the ETSI 21-inch shelf configuration.

ZTE Confidential & Proprietary 13

ZXA10 C300&C320 Product Description

Figure 2-2 ETSI 21-inch Shelf Configuration

Width of slot 0/1/10/11/21/22 is 25 mm, and the width of other slots is 22.5 mm.

Table 2-1 describes the ETSI 21-inch shelf configuration.

Table 2-1 ETSI 21-inch Shelf Configuration

Slot Card

0/1 Power card

2–9 PON interface cards, TDM interface cards, and

Ethernet interface cards

10/11 Switching and control card

12 – 19 PON interface cards, TDM interface cards, and

Ethernet interface cards

20 Common interface card

21/22 Ethernet uplink card

19-inch shelf

Figure 2-3 shows the IEC 19-inch shelf configuration.

14 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Figure 2-3 IEC 19-inch Shelf Configuration

Width of slot 0/1/10/11/19/20 is 25 mm, and the width of other slots is 22.5 mm.

Table 2-2 describes the IEC 19-inch shelf configuration.

Table 2-2 IEC 19-Inch Shelf Configuration

Slot Card

0/1 Power card

2–9 PON interface cards, TDM interface cards, and Ethernet

interface cards

10, 11 Switching and control card

12 – 17 PON interface cards, TDM interface cards, and Ethernet

interface cards

18 Common interface card

19/20 Ethernet uplink card

 1 U fan area

The fan box provides ventilation for the shelf. Fan speed can be automatically adjusted
according to the temperature.

ZTE Confidential & Proprietary 15

ZXA10 C300&C320 Product Description

2.1.2 ZXA10 C320 Hardware Architecture

Shelf Appearance

The ZXA10 C320 uses the 19-inch shelf of 2 U height, see Figure 2-4.

Figure 2-4 ZXA10 C320 Shelf Appearance

Shelf Configuration

Figure 2-5 shows the ZXA10 C320 shelf configuration.

Figure 2-5 ZXA10 C320 Shelf Configuration

The fan box is on the left side of the shelf, providing ventilation to the shelf. The fan box is
pluggable. The fan speed can be automatically adjusted according to the temperature.

Notes:

When the ZXA10 C320 uses AC power supply, the AC power card PRAM is installed in
slot 3.

16 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

2.1.3 Cards

Table 2-3 lists the cards supported by the ZXA10 C300/C320.

Table 2-3 ZXA10 C300/C320 Card List

Card Card Description Function

Type Name

Switching SCXN Type N switching • ZXA10 C300 switching and control

and and control card card
control • Provides one out-of-band NM
card interface, one debugging interface, one
SD card interface.
• Provides 4 SFP GE optical uplink
interfaces
• Support load balance work mode.

SCTM • ZXA10 C300 switching and control

card
• Provides one out-of-band NM
interface, one debugging interface, one
SD card interface.
• Provides 4 SFP+ 10GE optical uplink
interfaces (can be configured to SFP GE
interfaces)
• Support load balance work mode.
• Works with the power card PRWH and
the fan control card FCWD.

ZTE Confidential & Proprietary 17

ZXA10 C300&C320 Product Description

Card Card Description Function

Type Name

SMXA Type A switching • ZXA10 C320 switching and control

and control card card
• Provides one out-of-band NM
interface, one debugging interface, one
environment monitoring interface (digital
interface + RS232 serial port).
• Provides one GE electrical uplink
interface.
• Provides flexible Ethernet uplink
interface with UCDC1/2/3/4 daughter
card.
• Support load balance work mode.

Clock CKWSA Clock/time • Works with SCXN card.

daughter synchronization • Supports level-3 clock synchronization.
card daughter card • Supports 1588 V2 time
synchronization.

Ethernet XUTQ 4-port 10GE optical • Supports four 10GE SFP+ interfaces.
uplink interfaces Ethernet • Supports optical power monitoring.
card uplink card • Supports Ethernet uplink.
Does not support Ethernet user access
and cascading.

XUVQ 4-port 10GE optical • Supports four 10GE SFP+ interfaces.

interfaces Ethernet • Supports optical power monitoring.
uplink card • Supports Ethernet uplink.
• Supports SyncE.
Does not support Ethernet user access
and cascading.

GUFQ 4-port GE optical • Supports four GE SFP interfaces.

interfaces Ethernet • Supports optical power monitoring.
uplink card • Supports Ethernet uplink.
Does not support Ethernet user access
and cascading.

18 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Card Card Description Function

Type Name

GUSQ 2-port GE and 2-port • Supports two GE/FE SFP interfaces

FE Ethernet uplink and two GE RJ-45 interfaces.
card • Supports optical power monitoring.
• Supports Ethernet uplink.
Does not support Ethernet user access
and cascading.

HUTQ 2-port 10GE and • Supports two 10GE SFP+ interfaces

2-port GE Ethernet and two GE SFP interfaces.
uplink card • Supports optical power monitoring.
• Supports Ethernet uplink.
Does not support Ethernet user access
and cascading.

HUVQ 2-port 10GE and • Supports two 10GE SFP+ interfaces

2-port GE Ethernet and two GE SFP interfaces
uplink card • Supports optical power monitoring.
• Supports SynE.
• Supports Ethernet uplink.
Does not support Ethernet user access
and cascading.

UCDC/1 2-port GE uplink • ZXA10 C320 SMXA uplink daughter

daughter card card
• Supports two GE SFP interfaces.
• One optical interfaces Supports GE or
FE optical module.
• Supports optical power monitoring.
• Supports Ethernet uplink.

ZTE Confidential & Proprietary 19

ZXA10 C300&C320 Product Description

Card Card Description Function

Type Name

UCDC/2 1-port 10GE and • ZXA10 C320 SMXA uplink daughter

1-port GE uplink card
daughter card • Supports one 10GE SFP interfaces
and one GE SFP interfaces.
• 10GE optical interface fupports 10GE
or GE optical module.
• Supports optical power monitoring.
• Supports 1588v2 and clock/time
synchronization.
• Supports Ethernet uplink.

UCDC/3 1-port 10GE and • ZXA10 C320 SMXA uplink daughter

1-port GE uplink card
daughter card • Supports one 10GE SFP interfaces
and one GE SFP interfaces.
• 10GE optical interfaces supports 10GE
or GE optical module.
• GE optical interfaces supports GE
orFE optical module.
• Supports optical power monitoring.
• Supports Ethernet uplink.

UCDC/4 2-port GE uplink • ZXA10 C320 SMXA uplink daughter

daughter card card
• Supports two GE SFP interfaces and
1-port GE SFP interface.
• One GE optical . interface supports GE
or FE optical module
• Supports optical power monitoring.
• Supports 1588v2, and clock/time
synchronization.
• Supports Ethernet uplink.

20 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Card Card Description Function

Type Name

PON GTGO 8-port GPON • Supports 8 GPON SFP interfaces.

interface interface card • Supports maximum split ratio 1:128.
card • Supports optical power monitoring.
• Supports optical module ALS.

GTGH 16-port GPON • Supports 16 GPON SFP interfaces

interface card • Supports maximum split ratio 1:128
• Supports optical power monitoring.
• Supports optical module ALS.

GTXO 8-port XG-PON • Supports 8 XG-PON XFP interfaces

interface card • Supports maximum split ratio 1:256.
• Supports optical power monitoring.
• Supports optical module ALS.

Ethernet FTGK 48-port P2P • Supports 24 Ethernet CSFP interfaces.

interface Ethernet interface • Supports CSFP optical module and
card card maximum 48 subscribers.
• Supports GE or FE SFP optical
module , and maximum 24 subscribers.
• Supports optical power monitoring.
• Supports Ethernet cascading.
• Supports Ethernet uplink (maximum
two cards per ZXA10 C300).

GDFO 8-port GE Ethernet • Supports 8 Ethernet SFP interfaces

interface card • Supports GE and FE optical module.
• Supports optical power monitoring.
• Supports Ethernet uplink.
Does not support FTTH and cascading.

TDM CTLA STM-N TDM • Supports TDM uplink.

interface interface card • Supports two SDH optical interfaces.
card • Supports 2-port STM-1 optical module
or 1-port STM-4 optical module.

ZTE Confidential & Proprietary 21

ZXA10 C300&C320 Product Description

Card Card Description Function

Type Name

CTBB 32-port E1 balanced • Supports TDM uplink.

TDM interface card • Supports 32 E1 balanced interfaces.

CTTB 32-port T1 TDM • Supports TDM uplink.

interface card • Supports 32 T1 interfaces.

CTUB 32-port E1 • Supports TDM uplink.

unbalanced TDM • Supports 32 E1 unbalanced interfaces.
interface card

Common CICK Common interface • Provides 2-port 75 Ω BITS clock input

interface card interfaces.
card • Provides 1-port 75 Ω BITS clock output
interface/1PPS time output interface.
• Provides 2-port 120 Ω BITS clock input
inteface/1PPS+TOD time input
interfaces.
• Provides 1-port 120 Ω BITS clock
output interface/1PPS+TOD time output
interface.
• Provides one out-of-band NM
interface.
• Provides one public/maintenance
serial port (RS23/RS485 optional).

22 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Card Card Description Function

Type Name

CICG Common interface • Provides 2-port 75 Ω BITS clock input

card interfaces.
• Provides 1-port 75 Ω BITS clock output
interfaces
• Provides 2-port 120 Ω BITS clock input
interfaces.
• Provides one out-of-band NM
interface.
• Provides one reserved network
interface.
• Provides one public serial port
(RS232).
• Provides one reserved maintenance
serial port (RS232).
• Provides four digital input interfaces,
for 4-port digital input or 3-port digital
input +1-port MDF alarm signal input.
• Provides four digital output interfaces
• Provides one temperature sensor
interface.
• Provides one humidity sensor
interface.
• Provides one smog sensor interface.
• Provides one liquid sensor interface.
• Provides four security sensor interface.

ZTE Confidential & Proprietary 23

ZXA10 C300&C320 Product Description

Card Card Description Function

Type Name

Power PRWG 4.5U power card • ZXA10 C300 power card

card • Supports one -48 V/-60 V power
interface.
• Supports power interface filtering and
protection.
• Supports system power consumption
detection.
• Supports the detection alarm
protection of input under-voltage,
over-voltage, and interruption.
• Supports maximum current 30 A.
• Supports two reserved RJ45
interfaces.

PRWH 4.5U power card • ZXA10 C300 power card

• Supports one -48 V/-60 V power
interface
• Supports power interface filtering and
protection.
• Supports system power consumption
detection.
• Supports the detection alarm
protection of input under-voltage,
over-voltage, and interruption.
• Supports maximum current 40 A.
• Supports two reserved RJ45
interfaces.

PRAM AC power card • ZXA10 C320 AC power card

• Supports 220 V/110 V AC power input.
• Supports storage battery interface and
battery temperature sensor interface.
• Supports DC power output for heat
exchanger and EPM in outdoor cabinet.
• Support power-on switch.

24 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Card Card Description Function

Type Name

Backplan MWEA/ 21-inch backplane ZXA10 C300 10U 21-inch backplane

e R

MWIA/R 19-inch backplane ZXA10 C300 10U 19-inch backplane

MWMT 2U 19-inch ZXA10 C320 2U 19-inch backplane

backplane

Fan FCWB Fan control card • ZXA10 C300 fan control card
control • Supports monitoring of single line fan
card box.

FCWD Fan control card • ZXA10 C300 enhanced fan control

card
• Supports monitoring of double line fan
box.

F2U Fan control card ZXA10 C320 fan control card

– Ethernet uplink cards do not support Ethernet user access and cascading.

Table 2-4 lists the ZXA10 C300/C320 card configuration.

Table 2-4 ZXA10 C300/C320 Card Configuration

Card Card Switching and Control Slot

Type Name Card

SCXN SCTM SMXA

Switching SCXN - - - ZXA10 C300 slot 10/11

and
control SCTM - - - ZXA10 C300 slot 10/11
card
SMXA - - - ZXA10 C320 slot 3/4

ZTE Confidential & Proprietary 25

ZXA10 C300&C320 Product Description

Card Card Switching and Control Slot

Type Name Card

SCXN SCTM SMXA

Clock CKWSA √ Χ Χ ZXA10 C300 SCXN daughter

daughter card
card

Ethernet XUTQ Χ √ Χ ZXA10 C300 uplink link card slot

uplink
card XUVQ Χ √ Χ ZXA10 C300 uplink link card slot

GUFQ √ Χ Χ ZXA10 C300 uplink link card slot

GUSQ √ √ Χ ZXA10 C300 uplink link card slot

HUTQ √ √ Χ ZXA10 C300 uplink link card slot

HUVQ √ √ Χ ZXA10 C300 uplink link card slot

UCDC/1 Χ Χ √ ZXA10 C320 SMXA daughter

card

UCDC/2 Χ Χ √ ZXA10 C320 SMXA daughter

card

UCDC/3 Χ Χ √ ZXA10 C320 SMXA daughter

card

UCDC/4 Χ Χ √ ZXA10 C320 SMXA daughter

card

PON GTGO √ √ √ ZXA10 C300/ZXA10 C320

interface service card slot
card
GTGH √ √ √ ZXA10 C300/ZXA10 C320
service card slot

GTXO √ √ √ ZXA10 C300/ZXA10 C320

service card slot

26 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Card Card Switching and Control Slot

Type Name Card

SCXN SCTM SMXA

Ethernet FTGK √ √ √ ZXA10 C300/ZXA10 C320

interface service card slot (ZXA10 C300
card supports maximum two FTGK for
uplink.)

GDFO √ √ Χ ZXA10 C300 service card slot

TDM CTLA √ √ Χ ZXA10 C300 service card slot

interface
card CTBB √ √ Χ ZXA10 C300 service card slot

CTTB √ √ Χ ZXA10 C300 service card slot

CTUB √ √ Χ ZXA10 C300 service card slot

Common CICK √ √ Χ ZXA10 C300 slot 18/20

interface
card CICG √ √ Χ ZXA10 C300 slot 18/20

Power PRWG √ Χ Χ ZXA10 C300 slot 0/1

card
PRWH √ √ Χ ZXA10 C300 slot 0/1

PRAM Χ Χ √ ZXA10 C320 slot 3

Fan FCWB √ Χ Χ ZXA10 C300 fan box

control
card FCWD √ √ Χ ZXA10 C300 fan box

F2U Χ Χ √ ZXA10 C320 fan box

√: Supports

Χ: Does not support

ZTE Confidential & Proprietary 27

ZXA10 C300&C320 Product Description

2.1.4 Cabinets

Overview

The ZXA10 C300/C320 uses indoor cabinets and outdoor cabinets. Table 2-5 describes
the cabinets.

Table 2-5 ZXA10 C300/C320 Cabinet Description

Cabinet Cabinet Cabinet Name Cabinet Description

Type Model

Indoor B6030-22 19-inch indoor • Dimensions: 2200 mm × 600 mm × 300

cabinet C-IA cabinet of 300 mm (High × Width × Depth)
mm depth • Rear column installation
• For 19-inch ZXA10 C300 or ZXA10 C320
and hybrid mode
• Typical configuration: 2 × ZXA10 C300 or
2 × ZXA10 C320

B6030-22 21-inch indoor • Dimensions: 2200 mm × 600 mm × 300

C-EB cabinet of 300 mm (High × Width × Depth)
mm depth • Rear column installation
• For 21-inch ZXA10 C300
• Typical configuration: 2 × ZXA10 C300

Outdoor EC40EB Large outdoor • Dimensions: 1650 mm × 1400 mm ×

cabinet cabinet 550mm (High × Width × Depth)
• For 19-inch ZXA10 C300 or 21-inch
ZXA10 C300
• Maximum configuration: 1 × ZXA10 C300

EC70E Middle outdoor • Dimensions: 900 mm × 800 mm × 350

cabinet mm (High × Width × Depth)
• For ZXA10 C320
• Maximum configuration: 2 × ZXA10 C320

EC90EB Small outdoor • Dimensions: 1200mm × 650 mm ×

cabinet 250mm (High × Width × Depth)

28 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Cabinet Cabinet Cabinet Name Cabinet Description

Type Model

• For ZXA10 C320

• Maximum configuration: 1 × ZXA10 C320

Indoor Cabinets

The indoor cabinets supports good heat dissipation performance. B6030-22C-IA

and B6030-22C-EB have the same appearance, see Figure 2-6. The difference
of two cabinet is the position of installation columns.

Figure 2-6 Indoor Cabinet Appearance

ZTE Confidential & Proprietary 29

ZXA10 C300&C320 Product Description

A indoor cabinet components contain PDU, ZXA10 C300 shelves, and wiring
boxes, see Figure 2-7.

Figure 2-7 Indoor Cabinet Configuration

Notes:

30 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

The ZXA10 C320 requires front installation. Before installing the ZXA10 C320 in the
B6030-22C-IA cabinet, you need to install a adaptor bracket first.

Outdoor Cabinets

Figure 2-8 shows the appearance of the EC40EB cabinet.

Figure 2-8 EC40EB Cabinet Appearance

ZTE Confidential & Proprietary 31

ZXA10 C300&C320 Product Description

Figure 2-9 shows the typical configuration of the EC40EB cabinet.

Figure 2-9 EC40EB Cabinet Typical Configuration

Figure 2-10 shows the appearance of the EC70E cabinet.

32 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Figure 2-10 EC70E Cabinet Appearance

Figure 2-11 shows the typical configuration of the EC70E cabinet.

ZTE Confidential & Proprietary 33

ZXA10 C300&C320 Product Description

Figure 2-11 EC70E Cabinet Typical Configuration

Figure 2-12 shows the appearance of the EC90EB cabinet.

34 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Figure 2-12 EC90EB Cabinet Appearance

Figure 2-13 shows the typical configuration of the EC90EB cabinet.

ZTE Confidential & Proprietary 35

ZXA10 C300&C320 Product Description

Figure 2-13 EC90EB Cabinet Typical Configuration

2.2 Logical Architecture

Figure 2-14 shows the ZXA10 C300 hardware logical diagram.

36 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Figure 2-14 ZXA10 C300 Hardware Logical Diagram

Table 2-6 describes the modules function of logical architecture.

Table 2-6 Module Function Description of Logical Architecture

Module Function

Service interface Provides interfaces of different access technology, decapsulates

module or encapsulates subscriber data to Ethernet frames for internal
Ethernet switching. The card CPU is responsible for the
configuration, management, driving, diagnosis of service interface
module, and is controlled by the system CPU.

Control and Provides Ethernet convergence and switching, MPLS tunnel, IP

switching module: routing, supports clock and phase input from service card or
uplink card, distribute selected clock and phase to service cards.
The system CPU is responsible for the configuration,
management and diagnosis of the whole system, and driving
forwarding panel. The system CPU implements configuration,
management, driving, and diagnosis on service cards by
controlling the card CPUs.

Uplink interface Provides uplink GE or 10GE interface on network side. When the
module active and backup switching and control cards swaps, protection
swap is set up between the switching and control card and uplink
interfaces to avoid the reconnection of uplink fiber.

ZTE Confidential & Proprietary 37

ZXA10 C300&C320 Product Description

Figure 2-15 shows the service forwarding channels.

Figure 2-15 Service Forwarding Channels

The fast forwarding channel is from the interface card, Ethernet switch on the switching
and control card, to the 4.5 U uplink card.

 In upstream direction, GEM frames are decapsulated from to Ethernet frames, after
Ethernet switch on the switching and control card, and then sent to the 4.5U uplink
interface.

 In downstream direction, Ethernet frames are switched to interface cards by

switching and control card, sent to GEM port according to service mapping rules,
and then encapsulated to GEM frams.

 TDM services are encapsulated on the ONU or CES cards using PWE3 technology,
and switched to uplink port by the switching and control card.

The slow forwarding channel refers to the protocol packets processing on CPUs. The
packets can be either terminated on CPUs, or sent back to the forwarding channel by
CPUs. The common processing includes adding subscriber line ID, DHCP snooping,
ARP inspection, IGMP snooping, and Ethernet OAM.

2.3 Software Architecture

Figure 2-16 shows the ZXA10 C300 software architecture.

38 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Figure 2-16 ZXA10 C300 Software Architecture

Table 2-7 describes the module function of the software architecture.

Table 2-7 Module Function Description of Software Architecture

Module Function

Operating Includes distributed operating system, supports system control,

support version loading, inter-card communication, progress scheduling,
subsystem memory management, message communication, file system
management, fault diagnosis, and timer management.

Bearing and Abstracts the hardware and interfaces, drives hardware to bear and
driving forward services, shields the bottom layer hardware feature from
subsystem the upper layer software, provides general functional interfaces.

Service control Supports protocol processing and service control.

subsystem

System Provides interaction interface for NM and CLI, implements system

management operation and maintenance.
subsystem

ZTE Confidential & Proprietary 39

ZXA10 C300&C320 Product Description

3 Operation and Maintenance System

3.1 Networking

CLI Maintenance Mode

In CLI maintenance mode, users can manage and maintain the ZXA10
C300/C320 through the serial interface or network interface. Figure 18 shows the
maintenance networking diagram in CLI mode.

Figure 3-1 Maintenance Networking Diagram in CLI Mode

 Serial interface: the RJ45 interface CLI on the switching and control card of the OLT
(ZXA10 C300/C320) can be connected to the serial port of a maintenance terminal..

 Network interface: the OLT supports in-band NM and out-of-band NM.

The out-of-band NM interface is the 10/100M interface on the switching and

control card.

The inband NM interface is the internal logical interface, which is connected to

a terminal though the uplink port after the in-band NM configuration.

NM Maintenance Mode

In NM mode, the OLT communicates with the NM server using SNMP. The ZTE NMS
NetNumen U31 adopts C/S model and provides GUI for the unified management of

40 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

multiple broadband access devices and integrated access devices. Figure 3-2 shows the
maintenance networking diagram in NM mode.

Figure 3-2 Maintenance Networking Diagram in NM Mode

3.2 Functions

The ZXA10 C300/C320 supports the following operation and maintenance function:

 Topology management

 Configuration management

 Performance management

 Alarm management

 Security management

 Log management

 Task management

 System management

 Report management

ZTE Confidential & Proprietary 41

ZXA10 C300&C320 Product Description

All functions can be implemented in NM mode. Except topology management, task

management, and report management, all other functions can be implemented in CLI
mode.

NetNumen U31 is the unified EMS product of ZTE NetNumen brand. NetNumen U31
provides centralized operation and maintenance for the ZTE equipments and network,
supports end-to-end solutions, and supports the management of all ZTE wireline NEs,
including wireline equipments of the service layer, control layer, bearing layer, access
layer, and terminal layer, as well as the data equipments. NetNumen U31 provides
multiple north-bound interfaces to upper layer systems, such as FTP, SNMP, CORBA,
MTOSI, TL1, and DB.

Topology Management

Topology management provides topology view of the whole network, which presents key
information of the network on a clear interface. Topology view displays the NE, NE links,
and alarms in a direct and striking way.

Configuration Management

Configuration management supports the configuration and modification of NE

parameters. The parameters are synchronized to NEs and take effect. Configuration
management displays the equipment resources and configuration of key parameters,
which help users to learn about the resources and usage of key equipments and optimize
the network. Configuration management provides reference data to the performance
management and fault management.

Performance Management

Performance management is responsible for the performance monitoring of NEs. The

acquired performance data can be used to learn about the running status of the network.
Operation engineers and management department can use the data to plan and modify
the network and improve the network performance.

Alarm Management

Alarm management allows users to learn about the abnormal running status of the
network and equipments in time, helps operation engineers to locate the fault and solve

42 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

the problems to ensure the proper running status. Alarm management module receives
and processes the alarms from equipments and display alarms in GUI. The alarms can
be forwarded to specified target by emails and text messages.

Security Management

Security management prevents and prohibits unauthorized users from illegal accessing
or damaging the NetNumen U31 and NEs, prevents the legal users from unauthorized
operations, records all security related operation information for inspection, ensures the
legal operation on the system and proper running of the system.

Log Management

Log management manages the system logs. Logs are the records of events and
operations. By review logs, users can learn about the system running status, locating
faults, review and inspect import events. Log management is a useful tool for the system
administrator to trace system running status, locate faults, and trace users operations.

Task management

Task is a predefined procedure in the NMS. Task specifies the NMS behavior in certain
scenarios. Predefined task allows the NMS automatically carries out related operations
according to current running status to implement automatic scheduling and protection
and improve management efficiency.

System Management

System management is used to manage NetNumen U31. Using system management,

users can maintain the NMS. System management provides a unified operation platform
for maintenance and management, to implement the monitoring of the application server
and database server, and database management.

Report Management

Users can easily and directly learn about the system performance and running status by
reading the related reports. Report management can be used with task management to
provide periodical reports.

ZTE Confidential & Proprietary 43

ZXA10 C300&C320 Product Description

4 Product Features

4.1 Access Features

Table 4-1 describes the access features.

Table 4-1 Access Features

Type Function Description

GPON Physical layer-split Maximum split ratio 1:128.

feature ratio

Physical Upstream 1.244 Gbit/s, downstream 2.488 Gbit/s.

layer-bandwidth

Physical Within optical power budget, maximum logical distance

layer-transmission 60 km, differential distance maximum 20 km,
distance maximum physical distance 60 km.

Physical • Measures receiving optical power of ONU level on

layer-OLS OLT side.
• Calculates and queries the optical power loss
between OLT and ONUs
• Queries transmitting and receiving optical power on
ONU side.
• Queries OLT optical module parameters:
temperature, voltage, current, and transmission optical
power.
• Sets alarm thresholds of optical module parameters.

Physical • Downstream FEC is configured based on OLT PON

layer-FEC port.
• Upstream FEC is configured based on ONU PON
port.

ONU registration Supports GPON standard registration and multiple

and authentication authentication modes.

44 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

• SN (hardware SN)
• PW/HPW (password/hex password)
• LOID (logical ONU ID)
• LOID + PW/HPW
• SN + PW/HPW

ONU remote Supports to set up OMCC according to G.984.4 and

management G.988, and manage ONU remotely through OMCI.

Link layer-DBA Supports multiple ONU DBA modes: SR (Status

Report) , NSR (Non Status Report), and hybrid
(default).

Link Supports distance measurement defined in G.984.3.

layer-distance Distance can be converted to fiber length.
measurement

Link Supports T-CONT (Transmission CONTainer)

layer-T-CONT bandwidth profiles. Profile parameters include: type,
fixed bandwidth, assured bandwidth and , maximum
bandwidth.

Link layer-GEM • Supports to configure downstream queue mapping

Port on GEM Port.
• Supports to configure GEM Port Name, allocate Port
ID (129-4095, automatically), T-CONT, and queue
number.
• Supports to apply traffic profile to GEM Port.

Link • Supports AES-128 encryption. downstream control

layer-encryption based on GEM port.
• Supports OMCC encryption and independent
configuration (reserved GEM Port) .

ITU Type-B Trunk optical fiber protection.

protection

ITU Type-C Whole ODN protection.

ZTE Confidential & Proprietary 45

ZXA10 C300&C320 Product Description

Type Function Description

protection

XG-PO Physical Maximum split ratio 1:128, upstream 2.5 Gbit/s,

N layer-basic feature downstream 10 Gbit/s.
feature
Physical Within optical power budget, maximum logical distance
layer-transmission 60 km, differential distance maximum 40 km,
distance maximum physical distance 60 km.

Physical • Measures receiving optical power of ONU level on

layer-OLS OLT side.
• Calculates and queries the optical power loss
between OLT and ONUs
• Queries transmitting and receiving optical power on
ONU side.
• Queries OLT optical module parameters:
temperature, voltage, current, and transmission optical
power.
• Sets alarm thresholds of optical module parameters.

Physical Upstream/downstream FEC enabled by default.

layer-FEC

ONU registration Supports XG-PON standard registration and multiple

and authentication authentication modes.
• SN (hardware SN)
• RID (registration ID )
• LOID (logical ONU ID )
• LOID + RID
• SN + RID

ONU remote Supports to set up OMCC according to ITU-T G.988,

management and manage ONU remotely through OMCI.

Link layer-DBA Supports multiple ONU DBA modes: SR, NSR , and
hybrid (default).

Link Supports distance measurement defined in G.987.

46 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

layer-distance Distance can be converted to fiber length.

measurement

Link Supports T-CONT bandwidth profiles. Profile

layer-T-CONT parameters include: type, fixed bandwidth, assured
bandwidth and , maximum bandwidth.

Link layer-GEM • Supports to configure downstream queue mapping

Port on GEM Port.
• Supports to configure GEM Port Name, allocate Port
ID (129-4095, automatically), T-CONT, and queue
number.
• Supports to apply traffic profile to GEM Port.

Link • Supports AES-128 encryption. XG-PON

layer-encryption upstream/downstream encryption (work with ONU).
• Supports OMCC encryption and independent
configuration (reserved GEM Port).

ITU Type-B Trunk optical fiber protection.

protection

ITU Type-C Whole ODN protection.

protection

EPON Physical layer-split maximum split ratio 1: 64.

feature ratio

Physical Upstream/downstream bandwidth 1.25 Gbit/s.

layer-bandwidth

Physical Logical transmission distance 60 km, physical

layer-transmission distances vary with optical modules ( minimum 20 km).
distance

Physical • Measures receiving optical power of ONU level on

layer-OLS OLT side.
• Calculates and queries the optical power loss
between OLT and ONUs

ZTE Confidential & Proprietary 47

ZXA10 C300&C320 Product Description

Type Function Description

• Queries transmitting and receiving optical power on

ONU side.
• Queries OLT optical module parameters:
temperature, voltage, current, and transmission optical
power.
• Sets alarm thresholds of optical module parameters.

Physical • Downstream FEC, improving optical power budget.

layer-FEC • Upstream FEC control based on LLID.

ONU registration Supports multiple authentication modes.

and authentication • MAC
• SN
• LOID
• Hybird
• Auth-loid-as-sn (takes LOID as SN for authentication)

ONU remote • Supports MPCP.

management • Supports extended OAM functions for ONU remote
management.

Link layer-DBA Dynamically controls transmission window for ONU

upstream data.

Link Supports accurate distance measurement based

layer-distance MPCP for ONU.
measurement

Link layer-LLID In logical topology, EPON protocol sets up a logical

link for an OLT and each ONU. The preamble in a
Ethernet frame carries the logical link ID (LLID).

Link Supports downstream data encryption (Triple

layer-encryption Churning) .

PON protection Supports TYPE A/B/C/D protection. TYPE A only

available within a PON interface card. TYPE B/C/D
available within or between PON interface cards.

48 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

10G-EP Physical layer-split maximum 1: 128.

ON ratio
feature
Physical • OLT asymmetric PON port supports two downstream
layer-bandwidth channels: 10G bit/s and 1G bit/s; one upstream
channel: 1G bits/s.
• OLT symmetric PON port supports two downstream
and two upstream channels: 10G bit/s and 1G bit/s.

Physical In the scenario of 1:8 split ratio and deducting (2 + 3.5

layer-transmission + 1) dB engineering margin, supports maximum
distance distance 40 km, differential distance 20 km .

Physical • Measures receiving optical power of ONU level on

layer-OLS OLT side.
• Calculates and queries the optical power loss
between OLT and ONUs
• Queries transmitting and receiving optical power on
ONU side.
• Queries OLT optical module parameters:
temperature, voltage, current, and transmission optical
power.
• Sets alarm thresholds of optical module parameters.

Physical • Downstream FEC, improving optical power budget.

layer-FEC • Upstream FEC control based on LLID.

ONU registration • OLT asymmetric PON port supports ONU registration

and authentication of two tyeps: 1G-EPON, 10/1G-EPON.
• OLT symmetric PON port supports ONU registration
of three types: 1G-EPON, 10/1G-EPON, and
10/10G-EPON.
• Supports MAC, SN, LOID, hybrid, auth-loid-as-sn.

ONU remote • Supports MPCP.

management • Supports extended OAM functions for ONU remote
management.

ZTE Confidential & Proprietary 49

ZXA10 C300&C320 Product Description

Type Function Description

Link layer-DBA Dynamically controls transmission window for ONU

upstream data.

Link Supports accurate distance measurement based

layer-distance MPCP for ONU distance measurement.
measurement

Link layer-LLID In logical topology, EPON protocol sets up a logical

link for OLT and each ONU. The preamble in a
Ethernet frame carries the logical link ID (LLID).

Link Supports data encryption in compliance with CTC

layer-encryption standard.

PON protection Supports TYPE A/B/D.

P2P Basic feature • GE Ethernet interface, in compliance with IEEE

feature 802.3-2005.
• Supports bidirectional single fiber with CSFP optical
module.
• Supports bidirectional dual fiber with SFP optical
module.
• Supports FE interface.

SyncE output Synchronous Ethernet output performance is in

compliance with ITU-T G.8262.

IEEE 1588v2 Supports IEEE 1588v2 Master clock output.

Networking Supports LACP, STP, ITU-T G.8032.

protection

TDM E1/T1 interface CTUB and CTBB provides E1 interface. CTTB

CES provides T1 interface .
feature
STM-1/STM-4 CTLA provides STM-1 or STM-4 interface.
interface

PWE3 CTTB, CTUB/CTBB and CTLA supports PWE3

50 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

encapsulation encapsulation of TDM service.

4.2 Layer 2 Features

Table 4-2 describes the layer 2 (L2) features.

Table 4-2 Layer 2 Features

Type Function Description

L2-port Vport • Supports xPON virtual ports (Vports) to work as L2

port and carry L2 service.
• GPON/XG-PON: PON port + GEM port or GEM port
group corresponds to a Vport.

L2 port type L2 ports refers the port that carry L2 services, including
physical Ethernet ports, logical Vports and aggregation
ports.
• Physical Ethernet ports can be configured to uplink
ports or downlink ports.
• The PON Vport only supports access.
• Physical Ethernet ports of the same type can form
aggregation port by link aggregation. A aggregation
port can be configure to uplink port or downlink port.

L2 packet type An L2 port supports the standard Ethernet packets:

• Supports to receive and transmit standard untag,
single-tag and dual-tag packets.
• Supports to configure internal and external TPID for
receiving and transmission.

L2-port MAC filtering MAC address black list: supports MAC address table
- and discards packets whose source MAC address
access matches a entry in the table.

ZTE Confidential & Proprietary 51

ZXA10 C300&C320 Product Description

Type Function Description

control ACL L2 ports support L2 ACL, L3 standard ACL and L3

extended ACL to control the receiving and transmission
of packets.

L2-port Add external L2 ports support the following VLAN translation rules:
- VLAN VLAN tag or 1:1 • Add an external VLAN tag on ingress direction, delete
translati translate external an external VLAN tag on egress direction.
on VLAN tag • Delete an external VLAN tag on ingress direction, add
an external VLAN tag on egress direction.
• Translate external VLAN in 1:1 mode in both ingress
and egress directions.

Translate VLAN • In L2 port ingress direction, translates VLAN tag and

tag and add then adds external VLAN tag.
external VLAN tag • In l2 port egress direction, delete the external VLAN
tag, and then translate the internal VLAN tag.

Add SVLAN + L2 ports support the following VLAN translation rules:

CVLAN or • Add SVLAN + CVLAN in ingress direction, delete
translate SVLAN SVLAN + CVLAN in egress direction.
+ CVLAN • Add SVLAN + CVLAN in egress direction, delete
SVLAN + CVLAN in ingress direction.
• Translate VLAN + CVLAN in ingress/egress direction.

Smart VLAN L2 ports support add VLAN tag to untagged packets

according to MAC address (list), IP subnet, and
Ethernet type in ingress direction and delete the VLAN
tag in egress direction.

Smart QinQ L2 ports support to add SVLAN ID in ingress direction

and delete the SVLAN tag in egress direction
according to the following fields:
• CVLAN ID range
• EtherType
• CVLAN CoS
• CVLAN ID ＋ EtherType
• CVLAN ID ＋ CoS

52 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

PVID L2 ports support to configure PVID and add PVID tag

to untagged packets.

L2-port Traffic statistics Supports traffic statistics based on port and port
- other +SVLAN.
function
s Traffic mirroring • Supports traffic mirroring based on port, port + VLAN,
or ACL.
• Supports ingress/egress traffic mirroring
simultaneously or separately.

L2 - Static MAC Supports to configure static unicast MAC address on

MAC (permanent MAC) VLAN member port (including Vport/Ethernet
address port/aggregation port) to forward packets whose the
manage destination MAC address is the static MAC address
ment
MAC address Supports to configure aging time of learnt MAC
aging address.

MAC address Supports to enable MAC address learning on VLAN.

learning

MAC address Supports to configure MAC address learning limit base

number limit on port + VLAN. When learnt MAC address number
reaches the limit, stops learning MAC from the port +
VLAN.

MAC address Supports to query MAC address table according to

query VLAN and port.

L2 - VLAN bridge When an L2 port joins a VLAN after VLAN translation

service or PVID configuration, the L2 port forms a bridge
instance to forwarding Ethernet packets.

TR-101 N:1 VLAN Supports to configure multiple access ports (Vport,

downlink Ethernet ports) an one uplink port to the same
SVLAN and perform N:1 forwarding. The access ports
are horizontally separated.

ZTE Confidential & Proprietary 53

ZXA10 C300&C320 Product Description

Type Function Description

TR-101 TLS Supports to perform VLAN translation (C→S+C) on

multiple access ports , add SVLAN tag in ingress
direction, add one or multiple uplink port to the SVLAN,
and forward packets according to VLAN + MAC in the
SVLAN.

VLAN reuse Supports to configure the same VLAN on different

physical ports (Ethernet port and PON port). Broadcast
domains of L2 services forwarding in the system are
separated according to port + VLAN. L2 services
include 1:1/N:1 VLAN forwarding and TLS service
specified by TR101.

Cross connection When two L2 port are in the same SVLAN or SVLAN +
(TR-101 1:1 CVLAN, supports to forward packets according to
VLAN forwarding) SVLAN or SVLAN + CVLAN in 1:1 mode without
learning MAC address.

M-VLAN • MVLAN is the VLAN used for multicast. Supports to

forward multicast packets according to the multicast
forwarding table and discard unmatched packets.
• Supports to configure IGMP snooping\proxy\router in
MVLAN and generate multicast forwarding table.
• Supports translation of CVLAN and MVLAN, supports
span VLAN multicast.

VLAN layer 2 Supports to enable/disable layer 2 intercommunication

intercommunicati on two access ports in the same VLAN.
on

L2 - STP • Supports STP and RSTP defined in 802.1d.

protocol • Supports MSTP defined in 802.1q.
• Supports to configure priority of bridge, port path cost.
• Supports to display STP topology in NMS.
• Supports to divide STP domain base on port and
VLAN.
• Supports STP on uplink and downlink Ethernet ports.

54 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

LACP Supports Ethernet ports of the same type to form LAG

using LACP.

4.3 MPLS Features

Table 4-3 describes the MPLS features.

Table 4-3 MPLS Features

Type Function Description

MPLS basic Label distribution using Supports to distribute label using LDP, in
function LDP compliance with RFC3036.

Label distribution mode LDP supports Downstream Unsolicited (DU)

configuration - DU label distribution mode.

Label distribution mode LDP supports Downstream on Demand

configuration - DoD (DoD) label distribution mode.

Label retention mode - In the liberal label retention mode, the OLT
Liberal reserves all labels advertised by
downstream LSRs.

Label retention mode - In the conservative label retention mode, the

Conservative OLT only reserves the FEC-label mapping of
the valid next hop of an FEC.

Label control mode - Supports to configure the label control mode

Independent to independent (default).

Label control mode - Supports to configure the label control mode

Ordered to ordered.

LDP Extension for Inter Supports LDP Extension for Inter-Area LSP.
- Area LSP In case of no accurately matched route, the

ZTE Confidential & Proprietary 55

ZXA10 C300&C320 Product Description

Type Function Description

OLT can receive labels in accordance with

longest prefix match and form forwarding
items.

Static LSP Supports to configure static

inbound/outbound labels for LDP.

Explicit null Supports LDP, and supports explicit null by

configuration (PHP default (PHP is disabled), supports implicit
control) null configuration, in compliance with
RFC3031 chapter 3.16.

Graceful Restart When the protocol panel restarts or is

interrupted, the OLT can keep the original
forwarding messages. When the protocol
restarts successfully in neighbor-liveness
interval, the OLT can recover the upper
layer message according the bottom layer
forwarding messages.

MD5 encryption on Supports to configure MD5 key for the TCP

LDP session session between LDP and neighbors.

PWE3 basic Static PW Supports static PW configuration for MPLS

function L2VPN service.

Dynamic PW MPLS L2VPN supports dynamic PW

configuration and negotiation. Dynamic PWs
are set up using LDP, in compliance with
RFC4447.

PW type configuration Ethernet PW supports raw mode (Ethernet)

negotiation - ETH and tagged mode (Ethernet-VLAN). The
mode can be configured by commands. The
default mode is raw mode.

PW type configuration Supports E1, T1, and cesopsn-basic.

negotiation - TDM

56 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

PW status advertising Supports to enable (default) or disable PW

negotiation status advertising.

VCCV configuration Supports to configure control channel, in

negotiation compliance with RFC4385.
• Type1 (inband VCCV). When control word
is enabled, the default mode is inband
VCCV mode.
• Type2 (out-of-band VCCV). Out-of-band
control channel, ，MPLS Router Alert Label.
• Type3 (TTL expiry VCCV). Out-of-band
control channel, TTL Expiry VCCV.

Control word enable Supports to configure control preferred,

negotiation negotiate with peer end whether to use
control word and process control word in
accordance with the negotiation result, in
compliance with RFC 4385. At present,
control word only works with VCCV type1.

TTL configuration Supports to configure TTL (default: 64) for

PW. TTL processing is in compliance with
RFC4905.

PW ingress MPLS TC Supports to configure tc-to-cos profile and

to AC VLAN CoS apply the profile to a PW, mapping the PW
mapping TC to VLAN CoS in accordance with the
QoS profile.

PW egress AC VLAN Supports to configure cos-to-tc profile and

CoS to MPLS TC apply the profile to a PW, mapping the VLAN
mapping CoS to PW TC to in accordance with the
QoS profile.

PSN VLAN on network When the system transmit an MPLS packet

side inherits CoS from with VLAN tag to network side, the VLAN
MPLS label and AC CoS inherits the CoS from the TC in MPLS
VLAN label or CoS of AC VLAN.

ZTE Confidential & Proprietary 57

ZXA10 C300&C320 Product Description

Type Function Description

L2VPN - VPWS basic function Supports ETH VPWS AC configuration, in

Ethernet VLL compliance with RFC4448.
servcie

L2VPN - Basic VPLS serivce Supports AC and PW to associate with VFI.

Ethernet All ACs and PWs on a VFI supports basic
VPLS layer 2 switching, in compliance with
service RFC4762.

H-VPLS Supports PW type configuration

(hub/spoke). Data can be forwarded
between a spoke PW and a hub PW, or two
spoke PWs, in compliance with RFC4762.

Static MAC Supports to configure/delete static MAC on

VFI. The static MAC is listed in VFI
forwarding table.

MAC address learning Supports to learn MAC address on VFI. The

and aging aging time of MAC address can be
configured.

MAC withdraw Supports to enable MAC withdraw function

by the following:
• null-maclist (RFC4762)
• maclist (RFC4762)
• peid-maclist (ietf-l2vpn-vpls-ldp-mac-opt)

MAC delete manually Supports to clear all dynamically MAC

addresses learnt by a VPLS instance.
Supports to clear specific MAC of MAC of
specific AC or PW.

TDM VLL TDM Relay basic Supports ONU access and CES card
service function access.
Supports to configure static PW MPLS
PWE3 encapsulation mode on user side for
TDM PW relay service.

58 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

Supports to configure ONU through OMCI.

TDM PW relay - Supports three service types: e1satop,

payload service type t1Satop, and cesopsn.

1:1 PW Negotiation mode - Supports the master in master/slave mode.

redundant master in master/slave
protection mode

Negotiation mode - Supports the slave master/slave mode.

slave in master/slave
mode

Negotiation mode - Supports independent mode.

independent mode

Negotiation mode - non Supports non negotiation mode.

negotiation

Protection swap in case Supports PW protection swap. When

of abnormal PW event redundant PWs are configured, PW
protection swap is triggered in case of PW
abnormal event occurs.

Forced swap Supports active/back up PW forced swap by

command.

MPLS OAM LSP PING Supports IPv4 ping configuration, including

mask length, packet length, timeout and
times.

LSP TRACE Supports IPv4 trace configuration, including

mask length, timeout, TTL, and version.

VCCV negotiation Supports VCCV negotiation, that is,

negotiate the control channel encapsulation
mode and connectivity detection mode using
VCCV in the Interface subTLV, in
compliance with RFC5085. Static PWs does

ZTE Confidential & Proprietary 59

ZXA10 C300&C320 Product Description

Type Function Description

not negotiate.

VCCV PW PING Supports IPv4 ping configuration, including

mask length, packet length, timeout, times
and ACH head.

Notes:

Only SCTM supports the MPLS functions. SCTM supports TDM VLL service with TDM
interface cards.

4.4 Layer 3 Features

Table 4-4 describes the layer 3 (L3) features.

Table 4-4 Layer 3 Features

Type Function Description

L3 VLAN L3 routing Supports VLAN L3 routing interface functions.

interfac interface • Supports single tag VLAN to work as an L3 routing
e interface.
• Supports routing between VLAN routing interfaces.
• Supports multiple IP addresses on one VLAN routing
interface.
• Supports super VLAN.

SuperVLAN • A SuperVLAN consists of multiple VLANs

(subVLANs), which share the same IP subnet and
default gateway.
• Each subVLAN is an independent broadcast domain,
ensuring the separation between users.
• A SuperVLAN supports ARP proxy and routing
between subVLANs.

60 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

• A SuperVLAN supports DHCP relay or DHCP server.

• A SuperVLAN works as a L3 interface and supports
L3 protocols and properties.

Loopback Supports loopback interface.

interface

Basic Unicast routing Supports unicast routing forwarding based on host and
routing forwarding route entry.
function
s Static route and Supports to configure static route and default route.
default route

IP based load Supports ECMP and load balance based on IP

balance and address (source/destination).
ECMP

Routing test tool Supports routing test tools, such as Ping, TraceRoute.

ARP ARP Supports ARP and ARP table operation, including

configure/delete ARP entry.

ARP proxy Supports ARP proxy on single tag VLAN or Super

VLAN interface. Enable intercommunication between
users (in the same subnet) connected to the same
PON port.

DHCPv DHCP server Supports to configure IP address pool for dynamic IP

4 address allocation, in compliance with RFC2131.

DHCP relay Supports to configure the mapping between terminal

and server group according to L3 interface and option
60, in compliance with RFC2131.

DHCP proxy Supports lease time agent.

Option 82 Supports flexible configuration of sub-option 1: Circuit

ID and sub-option 2: Remote ID.

ZTE Confidential & Proprietary 61

ZXA10 C300&C320 Product Description

Type Function Description

Option 60 Supports to use option 60 to discriminate terminal type.

Dynami OSPFv2 Supports OSPFv2, in compliance with RFC 2328.

c
routing BGP Supports BGP4, in compliance with RFC4271.
protoco
l Multiple routing • Supports OSPF v2 and BGP simultaneously
protocol • Supports routing distribution between routing
protocols.

4.5 IPv6 Features

Table 4-5 describes the IPv6 features.

Table 4-5 IPv6 Features

Type Function Description

IPv6 IPv6 address Supports IPv6 global address configuration on L3

basic configuration interfaces. Supports automatic link address on L3
feature interfaces.

IPv6 diagnosis tool Supports IPv6 ping, TraceRoute.

Supports unicast Supports unicast routing forwarding based on host

routing forwarding and route entry.

Supports static route Supports static unicast routing table configuration.

and default route Supports default route.

IP address based load Supports ECMP, and load balance based on IP

balance and ECMP address (source/destination).

ND ND Supports ND, and ND cache operation.

L3 interface RA Supports to configure M\O ID and RA transmission

62 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

configuration interval.

DHCPv DHCPv6 L2 relay Supports to enable DHCPv6 L2 relay on VLAN and

6 relay (LDRA) port. Supports to insert option 18 (interface ID) and
option 37 (remote-ID), in compliance with
RFC6621.

Option 18 Supports to enable option 18 (interface ID) on port.

Option 37 Supports to enable option 37 (remote ID) on port.

IPv6 MLD snooping/proxy • Supports MLDv1/MLDv2.

multica • Supports snooping (including with proxy
st reporting) and proxy (default).
• Supports enable/disable MLD globally or on
VLAN. Supports enable/disable fast-leave on port.

IPv6 DHCPv6 snooping Sets up binding table of IP address, port and MAC
forwardi address through IPv6 address allocation such as
ng DHCPv6 snooping.
panel
safety IP source guard Checks the legality of source IP address of
upstream messages according to the DHCP
snooping binding table. Valid for GTGOE, GTGOG,
GTGH, GTXO and FTGK.

Upstream NS Prevents illegal user from modifying host IP-MAC

anti-spoof on VLAN entry of MSAN or BRAS by counterfeited NS.

VLAN 的 Downstream Checks the legality of downstream NS messages

NS filtering on VLAN according to DHCP snooping binding table.

ICMPv6 forwarding Supports to process RS/RA/NS/NA/MLD/redirect

control messages, in compliance with BBF TR-177.

IPv6 hybrid ACL Supports to permit or deny traffic according to the

following fields in Ethernet packet head and IPv6
packet head:
• Source IPv6 address

ZTE Confidential & Proprietary 63

ZXA10 C300&C320 Product Description

Type Function Description

• Destination IPv6 address

• IP protocol type
• TCP/UDP port
• VLAN
• Source/destination MAC
Supports traffic limit, priority mark, VLAN mark,
traffic direction, traffic mirroring, and traffic
statistics based on ACL.

4.6 Multicast Features

Table 4-6 describes the multicast features.

Table 4-6 Multicast Features

Type Function Description

Multica Multicast protocol • Supports IGMPv2, IGMPv3, MLDv1, MLD2.

st version • Supports to process, discard and transparent transmit
feature packets based on protocols. Supports downward
version compatibility.

Multicast function • Supports SCB multicast.

• Supports snooping, proxy mode.
• Supports IGMPv3 and MLDv2 ASM, SSM mode.
• Supports enable/disable protocol globally or on
VLAN.
• Supports IPTV CAC and CDR, including
management of channels, packages, and user rights.

64 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

4.7 Networking Features

Table 4-7 describes the networking features.

Table 4-7 Networking Features

Type Function Description

Ring ERPS ZXA10 C300 and ZXA10 C320 supports

network associated networking.
In a ring, ZXA10 C300 is the master node, ZXA10
C320 are the slave nodes. Rings are independent
and not crossed. A ring contains one ZXA10 C300
and maximum six ZXA10 C320.
Supports single GE ring, single 10GE ring, LAG
ring.
Supports G.8032, switching performance: 50 ms
ZXA10 C300 supports eight rings, ZXA10 C320
supports four rings.

Cascadi ZXA10 C320 • ZXA10 C320 supports cascading with ZXA10

ng cascading C320 and ZXA10 C300, or other devices.
• Cascading link supports LACP.
• Cascading port and user ports (PON port,
downlink Ethernet port and P2P port) are
separated by default.
• Cascaded devices are independent NEs on
NMS.

Uplink Uplink trunking • Supports aggregation of ports of the same type

protectio protection and on the card of the same type. Ethernet port on
n 4.5 U uplink card and switching and control card
are of the same type. Ethernet port on the FTGK
and GDFO are of the same type.
• Supports static trunking and dynamic port
aggregation (LACP).
• Supports load balance on ports based on
source/destination MAC, source/destination IP,
VLAN, TCP/UDP port.

ZTE Confidential & Proprietary 65

ZXA10 C300&C320 Product Description

Type Function Description

• Supports to configure traffic in an aggregation

group to load balance mode or active standby
mode.

UAPS protection • Supports to configure UAPS group and group

member ports.
• Supports automatic recovery. The active port
recovers when the link fault disappears.
• Supports to configure protection interval.
• Supports forced swap.
• supports ping for link detection. Supports to
configure next hop for ping destination.
• Supports port 1:1 protection and trunking 1:1
protection.
• Decrease of active links in the trunking group
leads to swap.
• Support active/backup card swap and port swap.
• Supports to disable light on backup optical port.
Supports port swap on down-status backup port.

SDH 1+1 uplink • Supports SDH uplink 1 + 1 service protection.

protection • Supports E1 interface based protection.
• Supports STM-1 interface based protection.

PON Type B/C protection • XG-PON and GPON supports ITU Type B/C
protectio protection.
n • Protection supports synchronization of
configuration and dynamic data.
• Broadband service is not affected when
protection swap happens.

4.8 Security Features

Table 4-8 describes the security features.

66 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Table 4-8 Security Features

Type Function Description

System L4 port disable Except the management ports, L4 ports are disabled
security by default, including 3784/4784 (BFD), 5100
-anti (environment monitoring), 6024/6034/6035
attack (RADIUS).
Supports to enable L4 port using CLI command or
MIB interface.

System CPU protocol Supports protocol packet rate limit for IPv4 and IPv6.
security packet rate limit Prevent DoS attack to CPU. Supports rate limit on
-overloa and scheduling different protocols and traffic scheduling.
d • Packets of different protocols are scheduled into
control queues of different priorities.
• Supports SP/SP+DWRR/DWRR queue scheduling
• Supports to configure and query rate limit of each
queue.

Networ MAC Force Supports MFF.

k Forwarding
security
-MFF

Networ Broadcast/multicast Supports to restrain flooding of broadcast, unknown

k flooding rate limit multicast, unknown unicast on ingress L2 port.
security
-floodin
g
restrain

Networ Downstream ARP When receiving a downstream ARP request

k filtering broadcast message, the OLT check its legality
security according to static or DHCP snooping binding table. If
-packet the destination IP address is not in the table, the OLT
s discards the message. Other wise, the OLT forwards
filering the message to specified user port.
Supports to enable/disable the function on VLAN.

Networ ARP/IP Supports to set up binding table of IP address, port,

ZTE Confidential & Proprietary 67

ZXA10 C300&C320 Product Description

Type Function Description

k anti-spoofing MAC address and VLAN through DHCP snooping.

security Supports to check legality of received ARP/IP
-IP messages and discard counterfeited packets without
securtiy learning their MAC addresses.
Supports to enable/disable the function on VLAN.

IP address • IP address binding (port and VLAN): set up binding

security/IP Source table of IP address, port, MAC address and VLAN
Guard through DHCP snooping to prevent IP address
spoofing, also name as IP source guard.
• Supports to enable/disable IP source guard on port,
including Sport (Vport/downlink Ethernet port).

Networ DHCP anti-spoofing Supports global DHCP anti-spoofing.

k • Supports to set a physical port to trust port or
security untrust port. The trust port receives and forwards
-DHCP DHCP offer messages. The untrust port denies and
security discards DHCP offer messages.
• User ports deny DHCP sever messages. Uplink port
deny DHCP client messages.
• Supports DHCPv6.

Service DHCP service Supports global DHCP service security.

security security • Detect and prevent DHCP server from allocating the
-DHCP same IP address to different users.
security • Detect and prevent DHCP server replying multiple
offer to the same user. Clear the related redundant
ARP entries.
• Detect and prevent illegal user from using
counterfeited DHCP release message to lead to
offline of legal user.

Service MAC address MAC address anti-spoofing is enabled by default and

security anti-spoofing can be configure on VLAN. Only specific VLAN
-MAC permits MAC address spoofing. MAC address
security anti-spoofing follows the following rules:
1. Protect key MAC address with static MAC address
configuration.

68 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

2. Uplink port MAC address priority: when MAC

address spoofing occurs, the MAC address learnt by
the uplink port has higher priority.
3. VMAC port MAC address priority: when MAC
address spoofing occurs, the MAC address learnt by
the VMAC enabled Vport has higher priority.
4. Set up binding table of IP address, MAC address,
port and VLAN using DHCP snooping/PPPoE
Snooping, set static MAC to prevent MAC spoofing.
5. The MAC address learnt first on a port is valid.

Service User port • The ONUs on the same PON port are separated by
security separation default.
-port • The ONUs on different PON port are separated by
separati default.
on
Uplink port The uplink port can communicate with each other by
separation default and support separation.

Service PON broadcast Supports to transmit broadcast packets (r Vport +

security packets separation VLAN) to ONU using unicast channel (not PON
-service based on VLAN broadcast channel).
separati
on

Networ Basic ACL Supports standard ACL, extended ACL, layer 2 ACL,
k hybrid ACL, IPv6 hybrid ACL, and ACL time range.
security The match fields of ACLS are as follows:
-ACL • Standard ACL: source IP address .
• Extended ACL,: IPv4 packet head, including source
IPv4 address , destination IPv4 address , IP protocol
type, ICMP type, TCP/UDP port, priority.
• Layer 2 ACL: Ethernet packet head, inlcuding VLAN
(single VLAN and dual VLAN), CoS, source MAC,
destination MAC, Ethernet type.
• Hybrid ACL: Ethernet packet head and IPv4 packet
head, including source IPv4 address , destination
IPv4 address , IP protocol type, ICMP type, TCP/UDP

ZTE Confidential & Proprietary 69

ZXA10 C300&C320 Product Description

Type Function Description

port, VLAN, source MAC, destination MAC, Ethernet

type.
• IPV6 hybrid ACL:Ethernet packet head and IPv6
packet head, including source IPv6 address ,
destination IPv6 address , IP protocol type, ICMP
type, TCP/UDP port, VLAN, source MAC, destination
MAC.
Supports to apply ACL on Ethernet port, PON port
and Vport on ingress/egress direction.

IPv6 ACL Supports IPv6 ACL: source/destination IP, protocol

type, source/destination port.

Networ Anti-DoS attack When the anti DoS attack function is enabled, the
k system monitors received control packets.
security Supports to configure rate threshold for protocol
-anti packets sent to CPU. When packet rate exceeds the
attack threshold, the system takes it as DoS attack. When
the times of attack reach set value, the system add
the port to black list and report alarms. Packets from
the port are processed according to the predefined
policy.
When detecting no DoS attack from the port, the
system deletes the port from the black list. Otherwise,
the port is still in the black list.
When the anti DoS attack function is disabled, the
system automatically deletes the black list.

Networ Forwarding panel Supports rate limit on L2/L3 protocols using ACLs.
k protocol packet rate
security limit
-protoc
ol
packet
rate
limit

70 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

4.9 Clock Features

Table 4-9 describes the clock features.

Table 4-9 Clock Features

Type Function Description

Freque Lock of multiple Supports to lock the following clock:

ncy external clock • SDH clock source
synchro • E1 clock source
nization
• 2 M BITS
• 2 MHz clock input
• SyncE clock
The ZXA10 C320 only supports SynE.

System clock output Supports the following interfaces:

on multiple interfaces • SDH interface clock
• Downlink P2P syncE
• External clock 2 MHz/2 M BITS
• GPON/XG-PON line clock
The ZXA10 C320 only supports P2P syncE and
xPON line clock.

Clock quality level • Supports two clock mode: QL-enable,

management QL-Disable.
• Supports to specify clock source SSM and output
clock SSM.
• SyncE supports ESMC to process SSM.

Clock source • Supports PLL force freerun, holdover and cancel.

selection and • Supports clock 24 hour holdover when lock is
switchover lost.
• Supports clock automatic selection and smooth
switchover, in compliance with ITU-T G.781.
• Supports force switchover of clock source by
software configuration.
• Supports clock smooth output when switching

ZTE Confidential & Proprietary 71

ZXA10 C300&C320 Product Description

Type Function Description

and control cards swap.

Time IEEE 1588v2 slave The OLT supports to work as IEEE 1588 slave to
synchro recover 1PPS and TOD signal and transmit to
nization GPON/XG-PON/P2P card.

External 1PPS + TOD • Supports external 1PPS + TOD input and

transmits the signal to service cards.
• Supports two channels of 1PPS + TOD input.
The ZXA10 C320 does not support 1PPS + TOD.

TOD over PON • Time synchronization in GPON layer is in

compliance with ITU-T G.984.3 Amd2.
• Time synchronization in XG-PON layer is in
compliance with ITU-T G.987.3.

IEEE 1588v2 master P2P card supports IEEE 1588v2 master.

1PPS input time • Supports smooth 1PPS output when 1PPS input
synchronization swap swaps.
• Supports smooth 1PPS output when switching
and control cards swap.
The ZXA10 C320 does not support 1PPS.

4.10 QoS Features

Table 4-10 describes the QoS features.

Table 4-10 QoS Features

Type Function Description

QoS Traffic control • Supports traffic control on Ethernet ports, Vports,

global GEM ports and service-ports.
function • Supports configuration of CIR/PIR/CBS/PBS/CM.

72 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

Supports traffic TrTCM.

• Supports color mark on upstream service traffic
according to CIR/PIR.
• Supports traffic shaping on PON ports
(downstream), Ethernet ports, and Vports.

Congestion Supports to discarding packets according that is

avoidance color based RED and WRED functions before
queue scheduling.
• Congestion nodes (including Vports and Ethernet
ports) support color based RED function.
• Supports to configure WRED function.
• Color based RED and WRED functions support to
discard yellow packets in congestion.

Queue scheduling Supports SP, DWRR and SP + DWRR queue

scheduling on Ethernet ports, PON ports, and
Vports.

Priority processing Supports CoS priority processing on Ethernet ports

and Vports.
• Default priority
• Port CoS override mode
• CoS-to-CoS
• DSCP-to-CoS
• Internal/external CoS copy
• MPLS LSP EXP-external VLAN CoS mapping
• ACL priority

H-QoS H-QoS for A PON user corresponds to a Vport and , a service

individual user and corresponds to a service-port. GEM-port and, CoS
individual service (different queues in a VPORT) implement the Vport
H-QoS for individual user and individual service.
The CIR traffic is guaranteed, the EIR traffic are
scheduled according to EIR weight. .

ACL Basic ACL • Supports standard ACL, extended ACL, layer 2

function ACL, hybrid ACL, IPv6 hybrid ACL and ACL time

ZTE Confidential & Proprietary 73

ZXA10 C300&C320 Product Description

Type Function Description

range.
• Supports to apply ACL on Ethernet ports, PON
ports and Vports.

Operation based • Supports traffic monitoring and traffic statistics.

on ACL • Supports traffic operations, such as copy to CPU,
redirection, traffic mirroring.
• Supports modification of CoS, DSCP, VLAN
• Supports SPAN, RSPAN and ERSPAN.
• Supports traffic limit and egress shaping.

4.11 TDM Service Features

Table 4-11 describes the TDM service features.

Table 4-11 TDM Service Features

Type Function Description

E1 E1 interface CTUB provides E1 interface, in compliance with

interface ITU-T G.703.

Line clock Supports recovery of adaptive clock.

PDH alarm Supports AIS and LOS detection.

Loopback test Supports system loopback and line loopback tests.

STM-1 or STM-1 interface CTLA provides STM-1 interface, in compliance with

STM-4 IITU-T G.957, G.707.
interface
STM-4 interface CTLA provides STM-4 interface, in compliance with
IITU-T G.957, G.707.

Line clock Supports recovery of adaptive clock and differential

74 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

clock.

SDH OAM Supports multiple loopback tests, alarm report,

performance measurement and query.

SDH APS Supports protection group configuration. Supports

protection swap fault triggered swap and manual swap.

CES 的 Supports MEF8 Uses Ethernet for PSN transmission.

PWE3 encapsulation
encapsula
tion Supports MPLS Uses MPLS LSP for PSN transmission.
encapsulation

Supports IP UDP uses IP for PSN transmission.

encapsulation

Supports Supports SAToP unstructured PW (RFC4553).

unstructured PW

Supports Supports CESoPSN structured PW (RFC5086).

structured PW

4.12 EOAM Features

Table 4-12 describes the eOAM features.

Table 4-12 eOAM Features

Type Function Description

802.3ah EFM Supports active and passive modes, OAM

message interval : 1 s – 10 s, default: 10 s.

Supports link monitoring and detection,

supports three link events:

ZTE Confidential & Proprietary 75

ZXA10 C300&C320 Product Description

Type Function Description

• Errored Frame Event,

• Errored Frame Period Event
• Errored Frame Seconds Summary Event

Supports to send remote end fault indication

message, process remote end fault
indication message sent by peer end, and
report peer end fault information to uplink
layer.

Supports to save event locally and report

alarms to NMS, inform the peer end with
remote alarm indication messages. Local
saving contains 72 15-minute records and 7
24-hour records.

Supports to transmit/receive event and

remote loop-back, supports to query and
display statistics during loop-back.

802.1ag/Y.1 CFM Supports to configure MD, MA, MP (MEP,

731 MIP), including level and direction.
Supports ETH CCM, supports to configure
CMM message interval, minimum: 10/3 ms.

Supports ETH-LB, supports to configure

ovetime threshold (default: 1 s), display
delay information and packet loss statistics.

Supports ETH-LT, supports to configure

ovetime threshold (default: 1 s), display
delay information and overtime packet loss
information.

Supports ETH-AIS, supports to send high

level AIS when connection is broken, and
stop sending AIS when connection recovers,
supports to receive AIS from remote end,
supports to restrain report of local high level

76 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

alarm, supports to configure AIS sending

interval.

Supports ETH-RDI, to receive and transmit

RDI.

PM Supports OAM for performance detection,

ETH-DM frame delay, frame delay jitter
measurement (bidirectional 2 DM).

Supports perform detection statistics,

including 72 15-minute records and 7
24-hour (DM).

ERPS fault detection Works with G.8032 ring network. When the
connection is broken, the OLT reports to
G.8032 to perform ring network switching.

Notes:

The uplink port on switching and control cards support eOMA features.

4.13 Reliability and Redundancy Features

Table 4-13 describes the reliability and redundancy features.

Table 4-13 Reliability and Redundancy Features

Type Function Description

Switching Forwarding panel Both switching and control cards forward traffic.
and control load balance When one card is invalid, the system switching
cards capacity decreases 50% without service
redundant interruption.
protection SCXN, SCXM and SMXA supports forwarding
panel load balance.

ZTE Confidential & Proprietary 77

ZXA10 C300&C320 Product Description

Type Function Description

Control panel CPUs of switching and control cards work in

redundancy active/standby mode. The active CPU controls the
system.

Uplink Ethernet When one switching and control card is invalid or

port protection active standby cards swap, 4.5 U uplink cards
switch external Ethernet connection to the
redundant switching and control card. MTBF of 4.5
U uplink card is better than that of the switching
and control card, which improve MTBF of the
system.
SMXA does not support uplink port protection.

Clock Automatic Supports external clock input of line clock,

redundant frequency synchronous Ethernet clock, two channels of
protection synchronization BITS. Supports automatic selection of clock
source selection source.
SMXA does not support BITS input.

Automatic phase Supports external phase input of 1588v2, two

synchronization chanels of 1PPS + ToD. Supports automatic
source selection selection of phase source.
SMXA does not support 1PPS + ToD input.

Smooth output Switching and control cards transmit

when active synchronization signals of frequency and phase to
standby cards service cards. When active standby switching and
swap control cards swap, the output signals of
frequency and phase are smooth.

Power Secondary power Supports two power cards, connecting to two

redundant input redundancy channels of power supply.
protection
Secondary power Supports two channel of power output to cards.
output redundancy When one power card is faulty, the other power
card provides power supply to the system.

Fan Dual line fan box Ensures two fans for each card slot. When one fan
redundant is invalid, the other fan satisfies the heat

78 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

protection dissipation requirement.

Overheat Card overheat Cards are configured with red high temperature
protection protection threshold, which cannot be modified by users.
When a card's temperature reaches the threshold,
the card reports an alarm and is powered off
immediately.
When the card is restarted, the system provides
special monitoring on loading process, including
delay start of card and chips.

4.14 Energy Saving Features

Table 4-14 describes the energy saving features.

Table 4-14 Energy Saving Features

Type Function Description

Energy saving Card electrical Main power of unconfigured card is off with
management only query function available.

PON optical module PON optical module supports automatic

energy saving power off when port is not configured.
management Supports optical module dormancy when
ONU is offline.

Reliability Fan speed automatic Fan speed is automatically adjusted

adjustment according to ambient temperature.

4.15 OTDR Features

Table 4-15 describes the OTDR features.

ZTE Confidential & Proprietary 79

ZXA10 C300&C320 Product Description

Table 4-15 GPON Built-in OTDR Features

Type Function Description

Working Built-in OTDR Supports distributed test and concurrent test,

mode using the same EMS with the OLT.

Alarm processing EasyOptical automatically triggers alarm

filtering and analysis on receiving ESM
alarms, and judges whether the is a fault.
When a fault is confirmed, EasyOptical
automatically enables alarm diagnosis and
OTDR to locate the fault. The diagnosis result
is automatically dispatched after being
connected with the order dispatching system
of the service provider. The whole process is
automatic.

Fault diagnosis EasyOptical supports one-key intelligent

diagnosis from OLT to ONU. By querying
PON system information, tracing POn system
running status, and integrating OTDR
functions, EasyOptical supports diagnosis of
the following faults:
• Abnormal OLT card
• Abnormal PON port
• Optical link degradation
• Trunk/branch optical link broken
• ONU power off
• Abnormal link attenuation
• Abnormal ONU status

Real-time monitoring EasyOptical uses the southbound interface to

connect to the EMS, implementing acquisition
of performance, alarm and network status,
using expert system to analyze data and
judge fault. When Easy optical detects
abnormality on optical fiber performance, it
enables relative fault diagnosis and locate the
fault by OTDR test.

80 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Type Function Description

Others EasyOptical supports warning for potential

network faults, which prevents network faults
and ensure service quality. EasyOptical
provides comprehensive statistics and
analysis in tables for service providers.
EasyOptical provides integrated
optcial/copper solutions by evaluating DSL
line quality and enhancing bandwidth.

OTDR Specification Event blind zone ≤3 m, attenuation blind zone

measureme ≤ 10 m
nt Sampling granularity: 0.5 m
Test split ratio: 1:64
Power consumption of OTDR module: 1 W
(no power consumption when OTDR module
is disabled. )

5 Networking Applications

5.1 FTTH Networking Application

FTTH is to connect equipment in central office to subscriber home using optical fibers. In
physical architecture, FTTH uses optical fiber to connect OLT and ONUs, and ONUs,
also named as ONTs, are deployed at subscriber home and provide UNIs to subscribers.

Figure 5-1 shows the FTTH networking diagram using PON technology.

ZTE Confidential & Proprietary 81

ZXA10 C300&C320 Product Description

Figure 5-1 FTTH Networking Diagram

EMS: Element Management System IMS: IP Multimedia Subsystem

In FTTH network, the distance between an OLT and ONUs can be 20 km. OLTs are
deployed in central office or equipment room in residential area; ONUs are deployed in
subscriber home.

FTTH terminals are divided to two types: one type is ONU with uplink PON interface,
home services are carried on CAT-5 twisted pair or WLAN (built-in or external AP), and
the other type is SFU + HGU.

The ZXA10 C300/C320 works as the OLT in an FTTH network, and provides multiple
services including voice, the Internet service (wireline or wireless), IPTV, and CATV with
series ONUs/ONTs, satisfying the multi-service access requirement of wireline, wireless,
WAN and LAN.

5.2 FTTB Network Application

FTTB supports two application scenarios: FTTB + LAN and FTTB + DSL.

Figure 5-2 shows the FTTB networking diagram using xPON technology.

82 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Figure 5-2 FTTB Networking Diagram

EMS: Element Management System IMS: IP Multimedia Subsystem

 FTTB + LAN

In FTTB + LAN scenario, the existing CAT-5 twisted pair the building can be used to
save the cost of networking. OTLs are centrally placed in equipment room in a
building. ONU (LAN MDUs) are placed in low voltage box in buildings. ONU service
range is 100 m. IADs provide voice/data/video services. MDUs provide
broadband/narrowband services. It is recommended each PON connects to no
more than 16 MDUs.

 FTTB + DSL

In FTTB + DSL scenario, subscribers use VDSL2/ADSL2+ technology. OTLs are

centrally placed in equipment room in a building. ONU (DSL MDUs) are placed in
low voltage box in buildings. ONU service range is 500 m. The subscriber capacity
of a DSL MDU is larger than that of a LAN MDU. It is recommended each PON
connects to no more than 8 MDUs.

The ZXA10 C300/C320 works as the OLT in an FTTB network, and provides multiple
services including voice, IPTV, and the Internet service.

ZTE Confidential & Proprietary 83

ZXA10 C300&C320 Product Description

5.3 FTTO Networking Application

FTTO is to connect equipment in central office with office subscribers using optical fibers.
Devices uplinked to ONUs/ONTs are managed by subscribers. This application is also
named as FTTBusiness (Fiber To The Business).

Figure 5-3 shows the FTTO networking diagram using xPON technology.

Figure 5-3 FTTO Networking Diagram

EMS: Element Management System IMS: IP Multimedia Subsystem

In FTTO application, OLTs are placed in the equipment room in a building, layer one
splitters (split ratio 1:32 or 1:64) are placed on each floor or every two or three floors.
When there are more than 32/64 subscribers on a floor, layer one splitters are placed on
each floor. When there are less than 32/64 subscribers on a floor, several floor can share
a layer one splitter.

Trunk fibers are laid out from the OLT to splitter boxes in low voltage well. Fiber capacity
is decided by the quantities of subscriber and splitters.

FTTO is different from FTTH because FTTO usually support TDM dedicate line service
but not IPV service.

84 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

FTTO is suitable for government and enterprises, which require high level security. FTTO
integrates VPN isolation and LAN interconnection, provides differental networks to
government departments and enterprise subscribers.

The ZXA10 C300/C320 works as the OLT in an FTTO network, supports optical link
protection, supports SBU andMTU, provides multiple services including voice, the
Internet service (wireline or wireless) , video conference, as well as PBX access and
TDM dedicate line with perfect QoS guarantee.

5.4 FTTC Networking Application

FTTC are applied in residential areas and rural areas, as the complement of FTTB/FTTH.
In FTTC application, fibers are connected to the ONUs or DSLAMs on the streets,
twisted pair cables are connected to subscribers. The ONU capacity is larger than FTTB
+ DSL. ONUs are placed in OCCs, area equipment rooms, or outdoor cabinets.

Figure 5-4 shows the FTTC networking diagram using xPON technology.

Figure 5-4 FTTC Networking Diagram

EMS: Element Management System IMS: IP Multimedia Subsystem

FTTC is suitable for the developing information technology in rural area, and prevents the
trunk copper cable from being stolen.

ZTE Confidential & Proprietary 85

ZXA10 C300&C320 Product Description

OLTs are placed in equipment room in the county or district. DSL MDUs are placed in
villages. Using passive splitter, multiple areas and villages can share the trunk fiber and
save networking cost. It is recommended that the ratio of voice port to broadband port is
1:2 – 1:4.

The ZXA10 C300/C320 works as the OLT in an FTTC network, provides multiple
services including voice, video, and the Internet service.

5.5 FTTM Networking Application

In mobile 3G/LTE era, mobile base stations include traditional macro base stations and
micro base stations. LTE micro-stations, such as IPCO/enterprise-level Femtocell,
home-level Femtocell, are deployed to enhance subscriber capacity and bandwidth and
implement extensive service coverage.

Operators use PTN/IP RAN to connect LTE macro base stations. The networks covers
the location of existing 2G/3G macro base stations, and are extended to satisfy the high
density requirement of LTE. Small cell base stations require flexible carrier for cost and
construction consideration.

FTTM provides low cost and flexible mobile backhaul solution to operators by combining
traditional mobile backhaul to wirelilne access networks using the FTTx networks. FTTM
is a complement for those stations not covered by PTN/IPRAN. Many operators are
considering to use the FTTM solution based on PON technology to bear smallcells.

 FTTM bearing macro cell backhaul solution

FTTM macro cell bearing includes E1/T1 bearing of 2G base stations and Ethernet
base station bearing of 3G/LTE, see Figure 5-5.

86 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Figure 5-5 FTTM Bearing Macro Cell Backhaul Networking Diagram

 Scenario 1: FTTM based on PON uses CES technology to terminate E1/T1

service on the OLT, and uses E1/STM-X interface to uplink to the exiting
SDH/MSTP network. The CES mobile backhaul service is encapsulated using
PWE3 over MEF.

 Scenario 2: For the backhaul service of 2G E1/T1, a gateway device

(Aggregation GW) is required on the peer end of the PSN to connect BSC
using E1/T1 interfaces. The CES mobile backhaul service between the ONU
and OLT is encapsulated using static PW/LSP. The CES mobile backhaul
service between the OLT and Aggr GW is encapsulated using dynamic
PW/LSP. The OLT supports TDM-relay function to convert static labels to
dynamic labels of TDM services.

 Scenario 3: For the Ethernet backhaul service of 3G/LTE, FTTM provides

xPON ONU or FE/GE P2P interfaces to connect the base stations. The OLT is
connected to the mobile core network via the PSN such as PTN/IPRAN. The
FTTM network supports Ethernet transparent transmission of backhaul service,
as well as the backhaul service conection to PSN network in MPLS L2VPN
mode.

ZTE Confidential & Proprietary 87

ZXA10 C300&C320 Product Description

 FTTM bearing smallcell backhaul solution

LTE smallcell network consists of smallcell base station, security gateway (SeGW),
access gateway (AG/AC/BRAS), 3GPP core network NE, NMS iAMS. Figure 5-6
shows the FTTM bearing smallcell backhaul solution.

Figure 5-6 FTTM Bearingsmallcell Backhaul Networking Diagram

The typical application of smallcells includes public area, enterprise, or home. The small
cell can be indoor device or outdoor device. The flexible FTTx networking base on PON
satisfies smallcell bearing of different applications.

According to requirements of different network coverage applications, smallcell base

stations can choose proper PON SFU or MDU to access the network.

According to the networking, the wireline OLT can be uplinked to the convergence ring
equipment of PTN/IPRAN or SR equipment of bearing network. The FTTM OLT provides
L2 Ethernet and L2VPN connection to uplink equipment. In another application, the OLT
keeps current connection on bearing network, and is connected to the mobile core
network via transportation network, the service model of mobile backhaul is the same as
before, connected to BRAS/SR device using L2.

The metropolitanarea core device is the GPS clock input node, provides synchronization
signal to mobile backhaul using synchronous Ethernet and 1588v2. In case the upper

88 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

layer devices do not support the delivery of time/clock, the OLT supports interface for
connecting an external clock or time source to satisfy the synchronization requirement.

5.6 FTTdp Networking Application

With the development of FTTH technology, ISPs are able to provide GE bandwidth to the
building and FE bandwidth to the home. Because the cost of FTTH application is
relatively high, ISPs begin to consider the cost effective application FTTdp, which enable
ISPs to deploy optical nodes more close to the subscribers. The FTTdp application
supports to use media such as twisted pair, Ethernet cable, coaxial cable, or power
cables to replace the optical fibers, and technologies such as VDSL, LAN, EOC, PLC,
and G.fast.

Compared with FTTB, the access devices DPUs in FTTdp application are more close to
subscriber terminals, usually less than 200 m. DPUs can be flexibly deployed in outdoor
area, eaves, basements, or inlets. DPUs are powered by the subscriber terminals and
require no configuration. .

FTTdp application is a complementary for FTTH application. FTTdp satisfies the OAM
requirements of FTTH and provides FE bandwidth to the home. In the early deployment
of FTTdp, subscriber terminals such as DSL modems and LAN modems can be reused.

Figure 5-7 shows the FTTdp networking diagram.

Figure 5-7 FTTdp Networking Diagram

RG: Residential Gateway CDN: Content Distribution Network

ZTE Confidential & Proprietary 89

ZXA10 C300&C320 Product Description

EMS: Element Management System IMS: IP Multimedia Subsystem

ZTE provides comprehensive end to end FTTdp solution. The ZXA10 C300 and ZXA10
C320 work as the OLT. The single port DPU F601D and multiple port DPU F611D
support multiple access modes (DSL, LAN). Other products include reversion power
supply module, NMS and OAM system.

FTTdp solution features the following.

 Supports to reuse the current copper cable at use side, saving cost and time.

 Supports FE bandwidth similar to FTTH with VDSL2 and G.fast.

 Supports reverse power supply to DPUs by CAT-5 twisted pair.

 Supports TR069 + OMCI management, consistent with FTTH.

 The current network satisfies the reverse power supply requirement of FTTdp.

 In the single port DPU and single user scenario, the reverse power supply module
PSE supports 8 W power supply for up to 200 m copper cable.

 In multiple port DPU scenario, the PSE decreases the power supply difference
between users to 5% by current equalization and power management. By
monitoring online status, the NMS controls the power supply switch of the PSE to
ensure the fair power supply.

5.7 FTTCable Networking Application

Cable TV service providers provides FTTCable solution to deploy DOCSIS technology in

FTTx applications. The FTTCable solution is a combination of xPON and DOCSIS EoC
(Ethernet over Coax) technologies.

 FTTCable application in FTTB scenario

In FTTB scenario, optical fibers are led in to buildings instead of copper cables to
provide higher bandwidth, see Figure 5-8.

90 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Figure 5-8 FTTCable Application in FTTB Scenario

 PON OLTs are placed in the hub head end equipment room, where the
conventional large capacity CMTSs locate.

 Remote-CMTSdevices (CMC in the figure ) are places in corridors in a building.

Through built-in CATV input modules , remote-CMTS devices are connected
to Cable TV network. Through built-in ONU modules, remote-CMTS devices
are connected to OLTs in the equipment room.

 CMs are placed in subscriber homes. STBs and CMs provides interactive TV
service, VoIP service and high-speed Internet service.

 Between OLTs and remote-CMTS devices are the ODN network.

Remote-CMTS devices use the mature DOCSIS 3.0 technology, which
minimize the risk of change in network architecture and technology. Because
remote-CMTS optical nodes are close to subscribers, the network bandwidth
can be conveniently enhanced in the future.

ZXA10 C300/C320 FTTcable solution combines the advantage of optical fibers and
copper cables, providing flexible broadband access network. The FTTcable solution
consists of serial products, including FTTx CO and CPE devices, remote-CMTS CO and
CPE devices, and EMS. In the FTTcable scenario, the OLT provides centralized

ZTE Confidential & Proprietary 91

ZXA10 C300&C320 Product Description

management for remote-CMTS devices, including zero configuration, SNMP proxy, and
version upgrade.

 FTTCable application in FTTC scenario

In FTTC scenario, optical fiber are led in to residential areas with passive relay in
dense mode, see Figure 5-8.

Figure 5-9 FTTCable Application in FTTC Scenario

6 Interfaces

6.1 Maintenance Interfaces

Table 6-1 describes the ZXA10 C300/C320 maintenance interfaces.

Table 6-1 Maintenance Interfaces Description

Card Interface Function Specification

SCXN/SC CLI Local debugging, RS232 serial port, RJ-45

TM connected to RS232 interface.

92 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Card Interface Function Specification

serial port.

10/100M Local debugging. 10 M/100 M Base-T adaptive,

RJ-45 interface.

DIAG Local debugging and 100 M/1000 M Base-T adaptive,

service mirroring. RJ-45 interface.

SD Local debugging, SD card slot.

connected to external SD
card.

SMXA CLI Local debugging, RS232 serial port, RJ-45

connected to RS232 interface.
serial port.

10/100M Local debugging. 10 M/100 M Base-T adaptive,

RJ-45 interface.

GE/FE Local debugging, service 100 M/1000 M Base-T adaptive,

mirroring. RJ-45 interface.

6.2 Service Interfaces

Table 6-2 describes the ZXA10 C300/C320 service interfaces.

Table 6-2 Service Interfaces Description

Card Interface Function Specification

GTGO/G GPON GPON subscriber access GPON SFP interface, including

TGH two types of optical modules:
Class B+, ClassC+, SC/PC
connector.

GTXO XG-PON XG-PON subscriber XG-PON XFP interface, including

ZTE Confidential & Proprietary 93

ZXA10 C300&C320 Product Description

Card Interface Function Specification

access two types of optical modules: N1,

N2a, SC/PC connector.

FTGK P2P P2P subscriber access P2P CSFP interface, including

two types of optical modules: GE
P2P and FE P2P, LC/PC
connector.

CTLA SDH SDH uplink to TDM SDH interface, including two

network types of optical modules: STM-1,
STM-4, LC/PC connector.

CTUB Unbalanc Unbalanced E1 interface Unbalanced E1 interface.

edE1 uplink to TDM network

XUTQ 10GE 10GE interface uplink to 10GE SFP+ interface, including

10GE network four types of optical modules: 300
m, 10 km, 40 km, 80 km, LC/PC
connector.

XUVQ 10GE 10GE interface uplink to 10GE SFP+ interface, including

10GE network four types of optical modules: 300
m, 10 km, 40 km, 80 km, LC/PC
connector.

GUFQ GE GE interface uplink to GE GE SFP interface, including five

network types of optical modules: 550 m,
10 km, 40 km, 80 km, 120 km,
LC/PC connector.

GUSQ GE GE interface uplink to GE GE SFP interface, including five

network types of optical modules: 550 m,
10 km, 40 km, 80 km, 120 km,
LC/PC connector.

GE GE interface uplink to GE GE RJ45 interface,

electrical network 10/100/1000M Base-T adaptive,
interface built-in indicators, CAT–5 twisted
pair.

94 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Card Interface Function Specification

HUTQ 10GE 10GE interface uplink to 10GE SFP+ interface, including

10GE network four types of optical modules: 300
m, 10 km, 40 km, 80 km, LC/PC
connector.

GE GE interface uplink to GE GE SFP interface, including five

network types of optical modules: 550 m,
10 km, 40 km, 80 km, 120 km,
LC/PC connector.

HUVQ 10GE 10GE interface uplink to 10GE SFP+ interface, including

10GE network four types of optical modules: 300
m, 10 km, 40 km, 80 km, LC/PC
connector.

GE GE interface uplink to GE GE SFP interface, including five

network types of optical modules: 550 m,
10 km, 40 km, 80 km, 120 km,
LC/PC connector.

GDFO GE GE interface uplink to GE GE SFP interface, including five

network types of optical modules: 550 m,
10 km, 40 km, 80 km, 120 km,
LC/PC connector.

7 Reliability Design

7.1 Hardware Reliability

Distributed Design

The ZXA10 C300/C320 uses distributed hardware architecture, implements distributed

process by modulized design of functions. Function modules include switching and
control module, service card module and uplink card module. Functions of modules are

ZTE Confidential & Proprietary 95

ZXA10 C300&C320 Product Description

independent and controlled by different processors. The fault of one processor does not
affect the running of the whole system.

Redundancy Design

The ZXA10 C300/C320 uses reliable design on key hardware components, including
active/backup protection, load sharing, hardware backup, which ensure reliability of the
hardware system.

 Card active/standby protection

Key components use multiple processors redundant technology. The switching and
control cards , power cards, and uplink cards adopt active and backup mechanism.
In proper status, the active components run, and the backup components keep
synchronization with the active one. Once an active component is faulty, the backup
component takes over the role of the active one to ensure the uninterrupted service.

 Load sharing

The switching and control cards support load sharing. In normal condition, both
switching and control cards are responsible for system control and service
processing. When one card is faulty, the other card performs system control and
service processing independently. Only the switching capacity is affected, the
services are not interrupted.

 Physical backup

The ZXA10 C300 supports enhanced fan box (two lines, 4-5 fans in each line) and
ensures that two fans run for the ventilation of each card. In case of any fan is faulty,
there is sufficient ventilation for each card.

7.2 Software Reliability

Fault Tolerant Ability

96 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

The ZXA10 C300/C320 supports periodical detection on software resources, task

monitoring, storage protection, data check, and operation logs to prevent system from
the impact of software faults and enhance the fault-tolerant ability of the software system.

Fault Monitoring and Processing

The ZXA10 C300/C320 supports automatic detection and diagnosis on sytem hardware
and software. The faulty hardware is automatically isolated, swapped, reset, or reloaded.

Hot Patch

When the equipment is running, the software may need error correct ion for bugs or
adaptation to add new function to satisfy service requirement. The conventional solution
is to shut down the equipment and upgrade the software version.

The ZXA10 C300/C320supports hot patch for switching and control card software, which
means the version of switching and control card can be online upgraded without
interrupting the service.

7.3 Data Reliability

The ZXA10 C300/C320 supports strict data protection mechanism.

 Supports real-time data synchronization and backup between the active and
backup modules. When the active module is faulty, the backup module becomes
the active module instantly, and the program and data takes effect at once.

 Supports automatic backup of active module database to the active module. When
the active module and backup module switches, the backup module can be reset
quickly.

7.4 Networking Reliability

The ZXA10 C300/C320 supports uplink trunk protection networking, dual uplink
networking, ring networking, and cascading networking. The ZXA10 C300/C320 supports

ZTE Confidential & Proprietary 97

ZXA10 C300&C320 Product Description

service and equipment protection on network side, and PON Type B/C protection and
span OLT Type B protection on service layer. Refer to for details.

8 Technical Specifications

8.1 Physical Specifications

Table 8-1 lists the indoor cabinet physical specifications.

Table 8-1 Indoor Cabinet Physical Specifications

Cabinet Cabinet Dimensions Cabinet Typical

(Height × Width × Depth) Weight Configuration
(Empty)

B6030-22C-I 2200 mm × 600 mm × 300 60 kg 2 × 19-inch ZXA10

A mm C300

B6030-22C-E 2200 mm × 600 mm × 300 60 kg 2 × 21-inch ZXA10

B mm C300

Table 8-2 lists the indoor cabinet physical specifications.

Table 8-2 Outdoor Cabinet Physical Specifications

Cabinet Cabinet Dimensions Cabinet Cabinet Battery Typical

(Height × Width × Weight Weight Weight Configur
Depth) (Empty) (Full) ation

EC40EB 1650 mm × 1400 mm × 255 kg 350 kg 123.2 kg 1×

550 mm ZXA10
C300

EC70E 900 mm × 800 mm × 82.5 kg 122.5 kg 24Ah: 8.4 2×

350 mm kg ZXA10
38Ah: C320

98 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Cabinet Cabinet Dimensions Cabinet Cabinet Battery Typical

(Height × Width × Weight Weight Weight Configur
Depth) (Empty) (Full) ation

13.2 kg
50Ah: 18
kg
65Ah: 22
kg

EC90EB 1200 mm × 650 × 250 40 kg 71 kg 14 kg 1×

mm ZXA10
C320

Table 8-3 lists the ZXA10 C300/C320 shelf physical specifications.

Table 8-3 shelf Physical Specifications

Shelf Shelf Dimensions (Height × Shelf Weight (Empty)

Width × Depth)

19-inch ZXA10 C300 443.7 mm × 482.6 mm × 270 mm 12.5 kg

shelf

21-inch ZXA10 C300 449.2 mm × 535 mm × 270 mm 14 kg

shelf

ZXA10 C320 shelf 86.1 mm × 482.6 mm × 270 mm 2.5 kg

Table 8-4 lists the ZXA10 C300/C320 card physical specifications.

Table 8-4 Physical Specifications

Card Card Dimensions (Height × Width × Card Weight

Depth)

SCXN 395.5 mm × 25 mm × 225 mm 1.132 kg (without

ZTE Confidential & Proprietary 99

ZXA10 C300&C320 Product Description

Card Card Dimensions (Height × Width × Card Weight

Depth)

uplink interface)
1.145 kg (with uplink
interfaces)

SCTM 395.5 mm × 25 mm × 225 mm 1.062 kg (without

uplink interface)
1.075 kg (with uplink
interfaces)

SMXA 200.25 mm × 37 mm × 225 mm 1.140 kg

XUTQ 197.75 mm × 25 mm × 225 mm 0.514 kg

XUVQ 197.75 mm × 25 mm × 225 mm 0.514 kg

GUFQ 197.75 mm × 25 mm × 225 mm 0.506 kg

GUSQ 197.75 mm × 25 mm × 225 mm 0.466 kg

HUTQ 197.75 mm × 25 mm × 225 mm 0.420 kg

HUVQ 197.75 mm × 25 mm × 225 mm 0.420 kg

GTGH 395.5 mm × 22.5 mm × 225 mm 1.000 kg

GTGO 395.5 mm × 22.5 mm × 225 mm 0.925 kg

GTXO 395.5 mm × 22.5 mm × 225 mm 1.340 kg

CTLA 395.5 mm × 22.5 mm × 225 mm 0.752 kg

CTBB 395.5 mm × 22.5 mm × 225 mm 0.713 kg

CTTB 395.5 mm × 22.5 mm × 225 mm 0.713 kg

CTUB 395.5 mm × 22.5 mm × 225 mm 0.680 kg

GDFO 395.5 mm × 22.5 mm × 225 mm 0.755 kg

100 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Card Card Dimensions (Height × Width × Card Weight

Depth)

FTGK 395.5 mm × 22.5 mm × 225 mm 1.510 kg

CICG 395.5 mm × 22.5 mm × 225 mm 0.719 kg

CICK 395.5 mm × 22.5 mm × 225 mm 0.750 kg

PRWG 197.75 mm × 25 mm × 225 mm 0.360 kg

PRWH 197.75 mm × 25 mm × 225 mm 0.360 kg

PRAM 200.25 mm × 37 mm × 225 mm 1.346 kg

MWIA/R 440 mm × 440 mm (Height × Width) 2.350 kg

MWEA/R 440 mm × 481 mm (Height × Width) 2.570 kg

MWMT 81 mm × 411 mm (Height × Width) 0.395 kg

Table 8-5 lists the ZXA10 C300/C320 fan box physical specifications.

Table 8-5 Fan Box Physical Specifications

Fan Box Fan Box Dimensions (Height × Width × Fan Box Weight
Depth)

19-inch ZXA10 43.6 mm × 437 mm × 258.1 mm 2.420 kg (single-line

C300 fan box (single-line fans) fans)
43.6 mm × 437 mm × 258.7 mm (dual-line 3.100 kg (dual-line
fans) fans)

21-inch ZXA10 43.6 mm × 490.5 mm × 258.1 mm 2.520 kg (single-line

C300 fan box (single-line fans) fans)
43.6 mm × 490.5 mm × 258.7 mm 3.240 kg (dual-line
(dual-line fans) fans)

ZXA10 C320 fan 84.3 mm × 35.8 mm × 247.9 mm 0.425 kg

ZTE Confidential & Proprietary 101

ZXA10 C300&C320 Product Description

Fan Box Fan Box Dimensions (Height × Width × Fan Box Weight
Depth)

box

8.2 Performance Specifications

System Performance

Table 8-6 lists the ZXA10 C300/C320 system performance specifications.

Table 8-6 System Performance Specifications

Parameter Description

Switching capacity of backplane bus ZXA10 C300: 6.4 Tbit/s

ZXA10 C320: 520 Gbit/s

Switching capacity of system layer 2 Line speed forwarding

packet forwarding rate

Switching and control card SCXN: 480 Gbit/s

SCTM: 2.56 Tbit/s
SMXA: 128 Gbit/s

Switching and forwarding delay Upstream: ≤600 us

Downstream: ≤200 us

Full load bit error rate <10 e-9 (full load transmission)

System Configuration

Table 8-7 lists the ZXA10 C300/C320 system configuration.

102 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Table 8-7 System Configuration

Item ZXA10 C300 ZXA10 C320

Configuration Configuration

Management interface One serial interface One serial interface

(RS232) (RS232)
One out-of-band NM One out-of-band NM
interface (10/100BaseT) interface (10/100BaseT)

Monitoring interface External environment External environment

monitoring box interface monitoring box interface
(serial), interfaces for (serial), trunk node digital
temperature, humidity, input/output interface
smog, flood, and security,
trunk node digital
input/output interface

GPON interface 256/224 32

XG-PON interface 64 16

Access GE interface 96 48

Access P2P GE interface 480 96

Uplink GE interface 8 4 optical +2 electrical

Uplink 10GE interface SCXN: 4 2

SCTM: 16

Interface Type and Quantity

Table 8-8 lists the ZXA10 C300/C320 management interface.

Table 8-8 Management Interfaces

Interface Type Interface Card Interface Quantity

ZXA10 C300 ZXA10 C320

ZTE Confidential & Proprietary 103

ZXA10 C300&C320 Product Description

Interface Type Interface Card Interface Quantity

ZXA10 C300 ZXA10 C320

Out-of-band NM SCXN/SCTM SMXA 1

interface (RJ45)

Local serial SCXN/SCTM SMXA 1

interface (console)

Table 8-9 lists the ZXA10 C300 uplink interfaces.

Table 8-9 ZXA10 C300 Uplink t Interfaces

Interface Type Interface Card Interface Quantity

GE optical interface GUFQ 4

GUSQ 4

HUVQ 2

HUTQ 2

10GE optical interface XUTQ 4

XUVQ 4

HUVQ 2

HUTQ 2

STM-1 optical interface CTLA 2

STM-4 optical interface CTLA 1

E1 electrical interface CTUB/CTBB 32

T1 electrical interface CTTB 32

104 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Table 8-10 lists the ZXA10 C320 uplink interfaces.

Table 8-10 ZXA10 C320 Uplink t Interfaces

Interface Type Interface Card Interface Quantity

GE electrical interface SMXA + UCDC1/2/3/4 1

GE optical interface SMXA + UCDC1/2/3/4 2/1/1/2

10GE optical interface SMXA + UCDC2/3 1/1

Table 8-11 lists the ZXA10 C300/C320 access interfaces.

Table 8-11 ZXA10 C300/C320 Access Interfaces

Interface Type Interface Card Interface Quantity

GPON GTGO 8

GTGH 16

XG-PON GTXO 8

GE FTGK 24

GDFO 8

P2P FTGK 48

8.3 Power Consumption

Table 8-12 lists the ZXA10 C300 shelf power consumption.

ZTE Confidential & Proprietary 105

ZXA10 C300&C320 Product Description

Table 8-12 ZXA10 C300 Shelf Power Consumption

Service Static Maximu Typical Card Configuration

Power m Power Power
Consu Consum Consum
mption ption ption

P2P 250 1520 1480 2 ╳ SCTM + 2 ╳ XUVQ + 2 ╳

PRWH + 10 ╳ FTGK + 6 ╳
GTGH

GPON 200 800 720 2 ╳ SCXN + 2 ╳ HUVQ + 2 ╳

PRWH + 16 ╳ GTGH

XG-PON 250 1680 1610 2 ╳ SCTM + 2 ╳ XUVQ + 2

╳ PRWH + 8 ╳ GTXO + 8 ╳
GTGH

Notes:

The power consumption of shelf is measured under the condition of -48 V DC power
supply and 25 ℃ indoor temperature.

• Static power consumption: system is powered on and all subscriber ports are
deactivated.

• Maximum power consumption: system is powered on and all subscriber ports are
activated.

• Typical power consumption: system is powered on and 50% subscriber ports are
activated.

Table 8-13 lists the ZXA10 C320 shelf power consumption.

106 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Table 8-13 ZXA10 C320 Shelf Power Consumption

Service Static Maximu Typical Card Configuration

Power m Power Power
Consu Consum Consum
mption ption ption

P2P 85 275 240 2 ╳ SMXA + 2 ╳ FTGK

GPON 85 145 135 2 ╳ SMXA + 2 ╳ GTGH

Table 8-14 lists the ZXA10 C300/C320 card power consumption.

Table 8-14 Card Power Consumption

Card Power Consumption (W)

SCXN (without uplink interface) Static: 70, maximum: 70, typical: 70

SCXN (with uplink interface) Static: 75, maximum: 75, typical: 75

SCTM (without uplink interface) Static: 110, maximum: 110, typical: 110

SCTM (without uplink interface) Static: 115, maximum: 115, typical: 115

SMXA+ UCDC1 Static: 23, maximum: 23, typical: 23

SMXA+ UCDC2 Static: 25, maximum: 25, typical: 25

SMXA+ UCDC3 Static: 27, maximum: 27, typical: 27

SMXA+ UCDC4 Static: 27, maximum: 27, typical: 27

XUTQ Static: 22, maximum: 22, typical: 20

XUVQ Static: 25, maximum: 25, typical: 23

GUFQ Static: 7, maximum: 5, typical: 4

GUSQ Static: 7, maximum: 5, typical: 4

ZTE Confidential & Proprietary 107

ZXA10 C300&C320 Product Description

Card Power Consumption (W)

HUVQ Static: 15 maximum: 15, typical: 13

HUTQ Static: 15, maximum: 15, typical: 13

GTGO Static: 5, maximum: 35, typical: 30

GTGH Static: 5, maximum: 65, typical: 55

GTXO Static: 5, maximum: 100, typical: 90

GDFO Static: 5, maximum: 30, typical: 27

FTGK (GE) Static: 5, maximum: 85, typical: 75

CTLA Static: 35 maximum: 35, typical: 34

CTBB Static: 24 maximum: 24, typical: 20

CTTB Static: 24, maximum: 24, typical: 20

CTUB Static: 16, maximum: 16, typical: 14

PRWG 5

PRWH 5

CICK 5

CICG 5

Table 8-15 lists the ZXA10 C300/C320 fan box power consumption.

Table 8-15 Fan Box Power Consumption

Fan box Power Consumption (W)

19-inch ZXA10 C300 fan box (single-line Static: 9, maximum: 80, typical: 35
fans)

108 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Fan box Power Consumption (W)

19-inch ZXA10 C300 fan box (dual-line Static: 11, maximum: 180, typical: 75
fans)

21-inch ZXA10 C300 fan box (single-line Static: 9, maximum: 80, typical: 35
fans)

21-inch ZXA10 C300 fan box (dual-line Static: 11, maximum: 180, typical: 75
fans)

ZXA10 C320 fan box Static: 4, maximum: 20, typical: 15

Notes:

The power consumption of cards and fan boxes is measured under the condition of -48 V
DC power supply and 25 ℃ indoor temperature.

8.4 Interface Specifications

8.4.1 XG-PON Interface

Table 8-16 lists the XG-PON optical module specifications.

Table 8-16 XG-PON Optical Module Specifications

Item Single Fiber Single Fiber

Bidirectional Optical Bidirectional Optical
Module, N1 Module, N2a

SN 1 2

Operating wavelength Tx: 1577 nm Tx: 1577 nm

Rx: 1270nm Rx: 1270 nm

Encapsulation mode XFP XFP

ZTE Confidential & Proprietary 109

ZXA10 C300&C320 Product Description

Item Single Fiber Single Fiber

Bidirectional Optical Bidirectional Optical
Module, N1 Module, N2a

Bandwidth Tx: 10 Gbit/s Tx: 10 Gbit/s

Rx: 2.488 Gbit/s Rx: 2.488 Gbit/s

Minimum output optical 2 dBm 4 dBm

power

Maximum output optical 6 dBm 8 dBm

power

Maximum receiver -27.5 dBm -29.5 dBm

sensitivity

Optical connector type SC/UPC SC/UPC

Optical fiber type Single mode Single mode

Transmission distance 20 km 20 km

Saturation optical power -7 dBm -9 dBm

Extinction ratio 8.2 dB 8.2 dB

8.4.2 GPON Interface

Table 8-17 lists the GPON optical module specifications.

Table 8-17 GPON Optical Module Specifications

Item Single Fiber Single Fiber

Bidirectional Optical Bidirectional Optical
Module, Class B+ Module, Class C+

SN 1 2

110 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Item Single Fiber Single Fiber

Bidirectional Optical Bidirectional Optical
Module, Class B+ Module, Class C+

Operating wavelength Tx: 1490nm Tx: 1490 nm

Rx: 1310nm Rx: 1310 nm

Encapsulation mode SFP SFP

Bandwidth Tx: 2.488 Gbit/s Tx: 2.488 Gbit/s

Rx: 1.244 Gbit/s Rx: 1.244 Gbit/s

Minimum output optical 1.5 dBm 3.0 dBm

power

Maximum output optical 5.0 dBm 7.0 dBm

power

Maximum receiver -28.0 dBm -32.0 dBm

sensitivity

Optical connector type SC/PC SC/PC

Optical fiber type Single mode Single mode

Transmission distance 20.0 km 20.0 km

Saturation optical power -8.0 dBm -12.0 dBm

Extinction ratio 10.0 dB 8.2 dB

8.4.3 10GE Interface

Table 8-18 lists the single channel dual fiber bidirectional 10GE optical module
specifications.

ZTE Confidential & Proprietary 111

ZXA10 C300&C320 Product Description

Table 8-18 Single Channel Dual Fiber Bidirectional 10GE Optical Module
Specifications

Item Single Channel Dual Fiber Bidirectional Optical Module

SN 1 2 3 4 5

Operating 850 nm 1310 nm 1310 nm 1550 nm 1550 nm

wavelength

Encapsulation SFP+ SFP+ SFP+ SFP+ SFP+

mode

Bandwidth 10.3125 10.3125 10.3125 10.3125 10.3125

Gbit/s Gbit/s Gbit/s Gbit/s Gbit/s

Minimum -5.0dBm -8.2dBm 1dBm -4.7dBm 0.0dBm

output optical
power

Maximum -1.0dBm 0.5dBm 5.0dBm 4.0dBm 4.0dBm

output optical
power

Maximum -9.9dBm -14.4dBm -15dBm -15.8dBm -24dBm

receiver
sensitivity

Optical LC LC LC LC LC
connector type

Optical fiber Multi mode Single mode Single Single mode Single
type mode mode

Transmission 0.3 km 10.0 km 10.0 km 40.0 km 80.0 km

distance

Saturation 0.5dBm 0.5dBm 0.5dBm -1.0dBm -7.0dBm

optical power

Extinction ratio 3dB 3.5dB 3.5dB 7.2dB 9dB

112 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Table 8-19 lists the single channel single fiber bidirectional 10GE optical module
specifications.

Table 8-19 Single Channel Single Fiber Bidirectional 10GE Optical Module
Specifications

Item Single Channel Single Fiber Bidirectional Optical

Module

SN 1 2

Operating wavelength Tx: 1330 nm Tx: 1270 nm

Rx: 1270 nm Rx: 1330 nm

Encapsulation mode SFP+ SFP+

Bandwidth 10.3125 Gbit/s 10.3125 Gbit/s

Minimum output optical -5.2 dBm -5.2 dBm

power

Maximum output optical 0.5 dBm 0.5 dBm

power

Maximum receiver -14.4 dBm -14.4 dBm

sensitivity

Optical connector type LC LC

Optical fiber type Single mode Single mode

Transmission distance 15.0 km 15.0 km

Saturation optical power 0.5 dBm 0.5 dBm

Extinction ratio 3.5 dB 3.5 dB

ZTE Confidential & Proprietary 113

ZXA10 C300&C320 Product Description

8.4.4 GE Interface

Table 8-20 lists the single channel dual fiber bidirectional GE optical module
specifications.

Table 8-20 Single Channel Dual Fiber Bidirectional GE Optical Module Specifications

Item Single Channel Dual Fiber Bidirectional Optical Module

SN 1 2 3 4 5

Operating wavelength 850 nm 1310 nm 1310 nm 1550 nm 1550 nm

Encapsulation mode SFP SFP SFP SFP SFP

Bandwidth 1.25 1.25 1.25 1.25 1.25

Gbit/s Gbit/s Gbit/s Gbit/s Gbit/s

Minimum output optical -9.5 dBm -9.0 dBm -4.5 dBm 0 dBm 0 dBm
power

Maximum output optical -4.0 dBm -3.0 dB 5.0 dBm 5.0 dBm 5.0 dBm
power

Maximum receiver -17.0 -20.0 -22.0 -22.0 -30.0

sensitivity dBm dBm dBm dBm dBm

Optical connector type LC LC LC LC LC

Optical fiber type Multi Single Single Single Single

mode mode mode mode mode

Transmission distance 0.55 km 10.0 km 40.0 km 80.0 km 120.0 km

Saturation optical power -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm

Extinction ratio 9.0 dB 9.0 dB 9.0 dB 9.0 dB 9.0 dB

Table 8-21 lists the single channel single fiber bidirectional GE optical module
specifications.

114 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Table 8-21 Single Channel Single Fiber Bidirectional GE Optical Module Specifications

Item Single Channel Single Fiber Bidirectional Optical

Module

SN 1 2 3 4

Operating wavelength Tx: 1310 Tx: 1490 Tx: 1310 Tx: 1490
nm nm nm nm

Rx: 1490 Rx: 1310 Rx: 1490 Rx: 1310

nm nm nm nm

Encapsulation mode SFP SFP SFP SFP

Bandwidth 1.25 Gbit/s 1.25 Gbit/s 1.25 Gbit/s 1.25 Gbit/s

Minimum output optical -9.0 dBm -9.0 dBm -3.0 dBm -3.0 dBm
power

Maximum output optical -3.0 dBm -3.0 dBm 3.0 dBm 3.0 dBm
power

Maximum receiver -19.5 dBm -19.5 dBm -23 dBm -23 dBm
sensitivity

Optical connector type LC LC LC LC

Optical fiber type Single Single Single Single

mode mode mode mode

Transmission distance 10.0 km 10.0 km 40.0 km 40.0 km

Saturation optical power 3.0 dBm 3.0 dBm 3.0 dBm 3.0 dBm

Extinction ratio 6.0 dB 6.0 dB 9.0 dB 9.0 dB

Table 8-22 lists dual channel single fiber bidirectional GE optical module specifications.

ZTE Confidential & Proprietary 115

ZXA10 C300&C320 Product Description

Table 8-22 Dual Channel Single Fiber Bidirectional GE Optical Module Specifications

Item Dual Channel Single Fiber

Bidirectional Optical Module option2

Operating wavelength Tx: 1490 nm

Rx: 1310 nm

Encapsulation mode CSFP

Bandwidth 1.25 Gbit/s

Minimum output optical power -9.0 dBm

Maximum output optical power -3.0 dBm

Maximum receiver sensitivity -19.5 dBm

Optical connector type LC

Optical fiber type Single mode

Transmission distance 10.0 km

Saturation optical power -3.0 dBm

Extinction ratio 6.0 dB

Table 8-23 lists GE electrical interface specifications.

Table 8-23 GE Electrical Interface Specifications

Item 1000Base-T RJ45 Electrical Interface

Interface type RJ-45 (TPI)

Interface rate Full duplex 10/100/1000 Mbps

Maximum transmission distance 100 m

116 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Item 1000Base-T RJ45 Electrical Interface

Standard compliance IEEE 802.3u

Cable type CAT-5 twisted pair

8.4.5 FE Interface

Table 8-24 lists the single channel dual fiber bidirectional FGE optical module
specifications.

Table 8-24 Single Channel Dual Fiber Bidirectional FE Optical Module Specifications

Item Single Channel Dual Fiber Bidirectional Optical

Module

SN 1 2 3 4

Operating wavelength 1310 nm 1310 nm 1550 nm 1550 nm

Encapsulation mode SFP SFP SFP SFP

Bandwidth 155 Mbit/s 155 Mbit/s 155 Mbit/s 155 Mbit/s

Minimum output optical -14.0 dBm -5.0 dBm -3.0 dBm -5.0 dBm
power

Maximum output optical -8.0 dBm 0.0 dBm 3.0 dBm 5.0 dBm
power

Maximum receiver -31.0 dBm -36.0 dBm -37.0 dBm -37.0 dBm
sensitivity

Optical connector type LC LC LC LC

Optical fiber type Single Single Single Single

mode mode mode mode

Transmission distance 15 km 40.0 km 80.0 km 80 km – 100

ZTE Confidential & Proprietary 117

ZXA10 C300&C320 Product Description

Item Single Channel Dual Fiber Bidirectional Optical

Module

km

Saturation optical power -8.0 dBm -10.0 dBm -10.0 dBm -10.0 dBm

Extinction ratio 8.0 dB 10.0 dB 10.0 dB 10.0 dB

Table 8-25 lists dual channel single fiber bidirectional FE optical module specifications.

Table 8-25 Dual Channel Single Fiber Bidirectional FE Optical Module Specifications

Item Dual Channel Single Fiber

Bidirectional Optical Module option2

Operating wavelength Tx: 1490 nm

Rx: 1310 nm

Encapsulation mode CSFP

Bandwidth 125 Mbit/s

Minimum output optical power -14 dBm

Maximum output optical power -8 dBm

Maximum receiver sensitivity -28 dBm

Optical connector type LC

Optical fiber type Single mode

Transmission distance 10 km

Saturation optical power -8 dBm

Extinction ratio 8 dB

118 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

8.4.6 E1/T1 Interface

Table 8-26 lists the E1/ T1 interface specifications.

Table 8-26 E1/T1 Interface Specifications

Item Specification

Interface type E1 (ITU-T G.703) T1 (ITU-T G.703)

Interface rate 2.048 Mbps 1.544 Mbps

Cable Twisted pair (100 Ω), Twisted pair (100 Ω)

coaxial cable (75 Ω)

Maximum transmission 50 m (twisted pair) , 100 m 50 m

distance (coaxial cable )

Resistance 120 Ω (balanced) 100 Ω

Jittering and drifting In compliance with ITU In compliance with ITU

G.823 G.824

8.4.7 STM-N Interface

Table 8-27 lists the single channel dual fiber bidirectional STM-1 optical module
specifications.

Table 8-27 Single Channel Dual Fiber Bidirectional STM-1 Optical Module
Specifications

Item Single Channel Dual Fiber Bidirectional Optical

Module

SN 1 2 3 4

Operating wavelength 1310 nm 1310 nm 1550 nm 1550 nm

Encapsulation mode SFP SFP SFP SFP

ZTE Confidential & Proprietary 119

ZXA10 C300&C320 Product Description

Item Single Channel Dual Fiber Bidirectional Optical

Module

Bandwidth 155 Mbit/s 155 Mbit/s 155 Mbit/s 155 Mbit/s

Minimum output optical -14.0 dBm -4.0 dBm -3.0 dBm -5.0 dBm
power

Maximum output optical -8.0 dBm 0.0 dBm 3.0 dBm 5.0 dBm
power

Maximum receiver -31.0 dBm -37.0 dBm -37.0 dBm -37.0 dBm
sensitivity

Optical connector type LC LC LC LC

Optical fiber type Single Single Single Single

mode mode mode mode

Transmission distance 15 km 40.0 km 80.0 km 80~100 km

Saturation optical power -8.0 dBm -10.0 dBm -10.0 dBm -10.0 dBm

Extinction ratio 8.0 dB 10.0 dB 10.0 dB 10.0 dB

Table 8-28 lists the STM-4 optical module specifications.

Table 8-28 STM-4 Optical Module Specifications

Item STM-4 622M Optical Module

SN 1 2 3

Operating wavelength 1310 nm 1310 nm 1550 nm

Encapsulation mode SFP SFP SFP

Bandwidth 622 Mbit/s 622 Mbit/s 622 Mbit/s

Minimum output optical -15.0 dBm -2 dBm -2 dBm

120 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Item STM-4 622M Optical Module

power

Maximum output optical -8.0 dBm 2 dBm 2 dBm

power

Maximum receiver -31.0 dBm -28 dBm -31 dBm

sensitivity

Optical connector type LC LC LC

8.4.8 Clock Interface

Table 8-29 lists the E12 interface specifications.

Table 8-29 T12 Interface Specifications

Item Specification

Interface type RJ48C Micro coaxial

Bit rate 2048 kHz 2048 kHz

Cable type Balanced cable Micro coaxial cable

Test load resistance 120 Ω 75 Ω

Maximum voltage peak value 1.9 V 1.5 V

(Vop)

Minimum voltage peak value 1.0 V 0.75 V

(Vop)

Maximum jitter on the output Refer to Table 5/G.823

port

Frequency accuracy of the 4.6 ppm, refer to ITU-T Rec. G.813

output interface

ZTE Confidential & Proprietary 121

ZXA10 C300&C320 Product Description

Item Specification

Jitter tolerance of the input Refer to ITU-T Rec. G.813

port

Table 8-30 lists the E12 interface specifications.

Table 8-30 E12 Interface Specifications

Item Specification

Interface type RJ48C Coaxial

Bit rate 2048 kbit/s. 2048 kbit/s.

Cable type Balanced cable Coaxial cable

Test load resistance 120 Ω 75 Ω

Coding mode HDB3

Maximum voltage of the 3V 2.37 V

pulse template

Voltage range (with no pulse) 0 ± 0.3 V 0 ± 0.237 V

Pulse width 244 ns

Positive to negative level 0.95 to 1.05

amplitude ratio at the pulse
interval center

Positive to negative pulse 0.95 to 1.05

width ratio at the middle point
of nominal amplitude

Jitter range of the output port Refer to G.823 5.1

Jitter tolerance of the input Refer to G.823 7.1

port

122 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Item Specification

Minimum return loss of the 6 dB (51 kHz – 102 kHz) ；

output port
8 dB (102 kHz – 3072 kHz)

Table 8-31 lists the 1PPS + TOD interface specifications.

Table 8-31 1PPS + TOD Interface Specifications

Item Specification

Interface type RJ45

Power level 422

1PPS specification The rising edge indicates the accurate time edge (start
point of a second), the rising time is less than 50 ns,
the pulse width should be 20 ms – 200 ms.

TOD specification TOD message default baud rate is 9600, no parity,

one start bit (low voltage), one stop bit (high volage),
idle frame is high volage, 8 bits. TOD message is
transmitted 1 ms after the 1PPS rising edge and within
500 ms. The TOD message indicates the rising time.
TOD message transmission frequency is 1 Hz.

8.5 Reliability Specifications

Table 8-32 lists the ZXA10 C300/C320 reliability specifications.

ZTE Confidential & Proprietary 123

ZXA10 C300&C320 Product Description

Table 8-32 Reliability Specifications

Item Specification

System redundancy Supports redundancy of switching and

control cards, uplink card, power cards
and fans .

Typical configuration availability >99.999%

MTBF 11 year

MTTR 30 minute

9 Environment Requirements

9.1 Power Requirements

Table 9-1 lists the ZXA10 C300/C320 power requirements.

Table 9-1 ZXA10 C300/C320 Power Requirements

Item Specification

Operating voltage (standard Rated voltage: -48 V DC

configuration)
Voltage range: -48 V ± 20%

Operating voltage (CIS country Rated voltage: -60 V DC

configuration)
Voltage range: -60 V ± 20%

Operating current ZXA10 C300: ≤40 A

ZXA10 C320: ≤6 A

Table 9-2 lists the indoor cabinet power requirements.

124 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Table 9-2 Indoor Cabinet Power Requirements

Item Specification

Power supply mode DC, AC

Rated voltage DC: -48 V/ -60 V

AC: 220 V/110 V

Voltage range DC: -48 V ± 20%, -60 V ± 20%

AC: 85 V – 300 V

Maximum input current DC: 80 A

AC: 40 A

Table 59 lists the outdoor cabinet power requirements.

Table 9-3 Outdoor Cabinet Power Requirements

Item Specification

Power supply mode AC

Rated voltage 220 V

Voltage range EC40EB: 85 V – 300 V

EC70E: 100 V – 240 V

EC90EB: 85 V – 300 V

Maximum input current EC40EB: 40 A

EC70E: 20 A

EC90EB: 10 A

ZTE Confidential & Proprietary 125

ZXA10 C300&C320 Product Description

9.2 Operating Environment

Climate Environment

Table 9-4 lists the operating climate environment requirements.

Table 9-4 Operating Climate Requirements

Item ZXA10 C300 Requirements ZXA10 C320 Requirements

Temperature -25 ℃ – 55 ℃ -40°C – 65°C

Temperature ≤3 ℃/min ≤3 ℃/min

change ratio

Relative 5% – 95% 5% – 95%

humidity

Altitude ≤4000 m ≤4000 m

Air pressure 70 kPa – 106 kPa 70 kPa – 106 kPa

Sun radiation ≤720 W/m2 ≤720 W/m2

Heat ≤600 W/m2 ≤600 W/m2

dissipation

Wind speed ≤5 m/s ≤5 m/s

– The temperature and humidity values are measured from 1.5 m height above the
floor and 0.6 m in front of the cabinet without front and back protection panels.

Biological Environment

 Protection from biological generation, such as fungi and leaf mold.

 Protection from rodents, such as a mouse.

126 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Air Cleanness

 No explosive, electronically conductive, magnetically conductive, or erosive dust

exists.

 The mechanical active materials concentration meets the requirements, as listed in

Table 9-5.

 The chemical active materials concentration meets the requirements, as listed in

Table 9-6.

Table 9-5 Operating Mechanical Active Materials Concentration

Mechanical Active Unit Value

Material

Floating dust mg/m3 ≤0.40

Sediment dust mg/m2·h ≤15.00

Sands mg/m3 ≤300.00

– Floating dust: diameter ≤ 75 μm

– Sediment dust: 75 μm ≤ diameter ≤ 150 μm

– Sands: 150 μm ≤ diameter ≤ 1000 μm

Table 9-6 Operating Chemical Active Materials Concentration

Chemical Active Material Unit Value

SO2 mg/m3 ≤0.30

H2S mg/m3 ≤0.03

NH3 mg/m3 ≤1.00

Cl2 mg/m3 ≤0.10

ZTE Confidential & Proprietary 127

ZXA10 C300&C320 Product Description

Mechanical Stress

Table 9-7 lists the operating mechanical stress requirements.

Table 9-7 Operating Mechanical Stress Requirements

Item Sub-Item Range

Sinusoidal vibration Location drift ≤3.50 mm -

Acceleration - ≤10.00 m/s2

Frequency 2 Hz – 9 Hz 9 Hz – 200 Hz

Unsteady impact Impact response ≤40.00 m/s2

spectrum II

Static load 0

– Impact response spectrum: The maximum acceleration responding curve under

regulated impact excitation. Impact response spectrum II: The lasting time of
semi-sinusoidal impact response spectrum is 22 ms.

– Static load: Packed equipment top pressure endurance in regulated stacking way.

9.3 Transportation Environment

Climate Environment

Table 9-8 lists the transportation climate environment requirements.

Table 9-8 Transportation Climate Requirements

Item Range

Temperature -40 ℃ – 70 ℃

128 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Item Range

Temperature change ratio ≤3 ℃/min

Relative humidity 5% – 95%

Air pressure 70 kPa – 106 kPa

Sun radiation ≤1120 W/m2

Heat dissipation ≤600 W/m2

Wind speed ≤30 m/s

Water Proof Requirement

The water proof requirements during the transportation are as follows:

 The package should be in good condition.

 Transportation vehicles must have waterproof measures and are protected from
rain.

 There should be no accumulated water in the transportation vehicles.

Biological Environment

 Protection from biological generation, such as fungi and leaf mold.

 Protection from rodents, such as a mouse.

Air Cleanness

 No explosive, electronically conductive, magnetically conductive, or erosive dust

exists.

 The mechanical active materials concentration meets the requirements, as listed in

Table 9-9.

ZTE Confidential & Proprietary 129

ZXA10 C300&C320 Product Description

 The chemical active materials concentration meets the requirements, as listed in

Table 9-10.

Table 9-9 Transportation Mechanical Active Materials Concentration

Mechanical Active Unit Value

Material

Floating dust mg/m3 -

Sediment dust mg/m2·h ≤3.00

Sands mg/m3 ≤100

– Floating dust: diameter ≤ 75 μm

– Sediment dust: 75 μm ≤ diameter ≤ 150 μm

– Sands: 150 μm ≤ diameter ≤ 1000 μm

Table 9-10 Transportation Chemical Active Materials Concentration

Chemical Active Material Unit Value

SO2 mg/m3 ≤0.30

H2 S mg/m3 ≤0.10

NO2 mg/m3 ≤0.50

NH3 mg/m3 ≤1.00

Cl2 mg/m3 ≤0.10

HCl mg/m3 ≤0.10

HF mg/m3 ≤0.01

O3 mg/m3 ≤0.05

130 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Mechanical Stress

Table 9-11 lists the transportation mechanical stress requirements.

Table 9-11 Transportation Mechanical Stress Requirements

Item Sub-Item Range

Sinusoidal Location drift ≤3.50 mm - -

vibration
Acceleration - ≤10.00 m/s2 ≤15.00 m/s2

Frequency 2 Hz – 9 Hz 9 Hz – 200 Hz 200 Hz – 500

Hz

Random Acceleration 1 m2/s3 0.30 m2/s3 0.30 m2/s3

vibration
Frequency 10 Hz – 200 Hz 200 Hz – 500 500 Hz – 1000
Hz Hz

Unsteady Impact ≤300 m/s2

impact response
spectrum II

Static load ≤5 kPa

– Impact response spectrum: The maximum acceleration responding curve under

regulated impact excitation. Impact response spectrum II: The lasting time of
semi-sinusoidal impact response spectrum is 22 ms.

– Static load: Packed equipment top pressure endurance in regulated stacking way.

9.4 Storage Environment

Climate Environment

Table 9-12 lists the storage climate environment requirements.

ZTE Confidential & Proprietary 131

ZXA10 C300&C320 Product Description

Table 9-12 Storage Climate Requirements

Item Range

Temperature -40 ℃ – 70 ℃

Temperature change ratio ≤1 ℃/min

Relative humidity 5% – 95%

Air pressure 70 kPa – 106 kPa

Sun radiation ≤1120 W/m2

Water Proof Requirement

The equipment should be stored indoors. No accumulated water appears on the storage
floor and no leakage from the ceiling. The equipment should be stored out of the possible
leakage places, such as the auto fire control facilities and water-heating system.

Biological Environment

 Protection from biological generation, such as fungi and leaf mold.

 Protection from rodents, such as a mouse.

Air Cleanness

 No explosive, electronically conductive, magnetically conductive, or erosive dust

exists.

 The mechanical active materials concentration meets the requirements, as listed in

Table 9-13.

 The chemical active materials concentration meets the requirements, as listed in

Table 9-14.

132 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Table 9-13 Storage Mechanical Active Materials Concentration

Mechanical Active Unit Value

Material

Floating dust mg/m3 ≤5.00

Sediment dust mg/m2·h ≤20.00

Sands mg/m3 ≤300.00

– Floating dust: diameter ≤ 75 μm

– Sediment dust: 75 μm ≤ diameter ≤ 150 μm

– Sands: 150 μm ≤ diameter ≤ 1000 μm

Table 9-14 Storage Chemical Active Materials Concentration

Chemical Active Material Unit Value

SO2 mg/m3 ≤0.30

H2 S mg/m3 ≤0.10

NO2 mg/m3 ≤0.50

NH3 mg/m3 ≤1.00

Cl2 mg/m3 ≤0.10

O3 mg/m3 ≤0.05

Mechanical Stress

Table 9-15 lists the storage mechanical stress requirements. .

ZTE Confidential & Proprietary 133

ZXA10 C300&C320 Product Description

Table 9-15 Storage Mechanical Stress Requirements

Item Sub-Item Range

Sinusoidal vibration Location drift ≤1.50 mm -

Acceleration - ≤5.00 m/s2

Frequency 2 Hz – 9 Hz 9 Hz – 200 Hz

Unsteady impact Impact response

spectrum II ≤40.00 m/s2

Static load ≤5 kPa

– Impact response spectrum: The maximum acceleration responding curve under

regulated impact excitation. Impact response spectrum II: The lasting time of
semi-sinusoidal impact response spectrum is 22 ms.

– Static load: Packed equipment top pressure endurance in regulated stacking way.

10 Protocols and Standards

10.1 Software Standards

Table 10-1 lists the software standards that the ZXA10 C300/C320 complies with.

Table 10-1 Software Standards

Standard No. Standard Name

Services Architecture

TR-101 Migration to Ethernet-Based DSL Aggregation

TR-156 Using GPON Access in the context of TR-101

134 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Standard No. Standard Name

TR-177 IPv6 in the context of TR-101

TR-187 IPv6 for PPP Broadband Access

TR-142 Framework for TR-069 enabled PON devices

MEF9 Abstract Test Suite for Ethernet Services at the UNI

GPON

ITU-T G.984.1 General characteristics

ITU-T G.984.2 Physical Media Dependent (PMD) layer specification

ITU-T G.984.3 Transmission convergence layer specification

ITU-T G.984.4 ONT management and control interface specification

ITU-T G.984.5 Gigabit-capable Passive Optical Networks (G-PON):

Enhancement band

ITU-T G.984.6 Gigabit-capable passive optical networks (GPON): Reach

extension

ITU-T G.sup45 GPON power conservation

ITU-T G.988 ONU management and control interface (OMCI) specification

XG-PON

ITU-T G.987.1 10-Gigabit-capable passive optical networks (XG-PON):

General requirements

ITU-T G.987.2 10-Gigabit-capable passive optical networks (XG-PON):

Physical media dependent (PMD) layer specification

ITU-T G.987.3 10-Gigabit-capable passive optical networks (XG-PON):

Transmission convergence (TC) specifications

Ethernet

ZTE Confidential & Proprietary 135

ZXA10 C300&C320 Product Description

Standard No. Standard Name

IEEE Std 802.1D Edition Media Access Control (MAC) bridge

IEEE 802.1p LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization

IEEE 802.1q IEEE standard for local and metropolitan area networks
Virtual Bridged Local Area Networks

IEEE Std 802.2 Logic link control

IEEE Std 802.3 Carrier sense multiple access with Collision Detection
(CSMA/CD) Access Method and Physical Layer
Specifications

IEEE Std 802.3ad link aggregation

IEEE Std 802.1ax

IEEE Std 802.1d Edition, Spanning Tree Protocol

IEEE Std 802.1w Rapid Spanning Tree Protocol

IEEE Std 802.1s Multiple Spanning Tree Protocol

DHCP

RFC2131 Dynamic Host Configuration Protocol

RFC2132 DHCP Options and BOOTP Vendor Extensions

RFC3046 DHCP Relay Agent Information Option

RFC3315 Dynamic Host Configuration Protocol for IPv6 (DHCPv6)

PPPoE+

RFC2516 A Method for Transmitting PPP Over Ethernet (PPPoE)

IPv4

RFC 768 User Datagram Protocol

136 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Standard No. Standard Name

RFC 783 TFTP Protocol (revision 2)

RFC 791 Internet Protocol

RFC 792 Internet Control Message Protocol

RFC 793 Transmission Control Protocol

RFC 826 Ethernet Address Resolution Protocol

RFC 854 Telnet Protocol Specification

RFC 959 File Transfer Protocol

RFC 1305 Network Time Protocol (Version 3)Specification,

Implementation and Analysis

RFC 5905 The NTP Client support NTP Version 4

RFC 4251 The Secure Shell (SSH) Protocol Architecture

RFC 2138 Remote Authentication Dial In User Service (RADIUS)

RFC 2328 OSPF Version 2

RFC 1058 Routing Information Protocol (RIP)

RFC 1771 A Border Gateway Protocol 4 (BGP-4)

RFC 2131 Dynamic Host Configuration Protocol

RFC 3046 DHCP Relay Agent Information Option

IPv6

RFC 2460 Internet Protocol, Version 6 (IPv6) Specification

RFC 4861 Neighbor Discovery for IP version 6 (IPv6)

RFC 4862 IPv6 Stateless Address Autoconfiguration

ZTE Confidential & Proprietary 137

ZXA10 C300&C320 Product Description

Standard No. Standard Name

RFC 4443 Internet Control Message Protocol (ICMPv6) for the Internet
Protocol Version 6 (IPv6) Specification

RFC 2526 Reserved IPv6 Subnet Anycast Addresses

RFC 3306 Unicast-Prefix-based IPv6 Multicast Addresses

RFC 3484 Default Address Selection for Internet Protocol version 6

(IPv6)

RFC 3513 Internet Protocol Version 6 (IPv6) Addressing Architecture

RFC 4291 IP Version 6 Addressing Architecture

RFC 2374 An IPv6 Aggregatable Global Unicast Address Format

RFC 3587 IPv6 Global Unicast Address Format

RFC 4007 IPv6 Scoped Address Architecture

RFC 4193 Unique Local IPv6 Unicast Addresses

RFC 2464 Transmission of IPv6 Packets over Ethernet Networks

draft-krishnan-6man-r Line identification in IPv6 Router Solicitation messages

s-mark

draft-ietf-dhc-dhcpv6-l Lightweight DHCPv6 Relay Agent

dra

draft-gundavelli-v6ops Unicast Transmission of IPv6 Multicast Messages on Link-

-l2-unicast layer

Multicast

RFC1112 Host Extensions for IP Multicasting

RFC 2236 Internet Group Management Protocol, Version 2

RFC 3376 Internet Group Management Protocol, Version 3

138 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Standard No. Standard Name

RFC 2710 Multicast Listener Discovery (MLD) for IPv6

RFC 3569 An Overview of Source-Specific Multicast (SSM)

RFC 3590 Source Address Selection for the Multicast Listener Discovery
(MLD) Protocol

RFC 4541 Considerations for Internet Group Management Protocol

(IGMP) and Multicast Listener Discovery (MLD) Snooping
Switches

RFC 3810 Multicast Listener Discovery Version 2 (MLDv2) for IPv6

RFC 4604 Using Internet Group Management Protocol Version 3

(IGMPv3) and Multicast Listener Discovery Protocol Version 2
(MLDv2) for Source-Specific Multicast.

RFC 4605 Internet Group Management Protocol (IGMP) / Multicast

Listener Discovery (MLD)-Based Multicast Forwarding
("IGMP/MLD Proxying")

LDP

RFC 3036 Label Distribution Protocol (LDP) Specification

RFC 5283 Establishment of LSPs across multiple IGP areas

RFC 3478 Graceful Restart Mechanism for Label Distribution Protocol

RFC 5036 LDP Specification

RFC 3037 LDP Applicability

RFC 3215 LDP State Machine

RFC 3612 Applicability Statement for Restart Mechanisms for the Label
Distribution Protocol

L2 VPN

ZTE Confidential & Proprietary 139

ZXA10 C300&C320 Product Description

Standard No. Standard Name

RFC 4665 Service Requirements for Layer 2 Provider Provisioned

Virtual Private Networks

RFC 4664 Framework for Layer 2 Virtual Private Networks (L2VPNs)

RFC 3916 Requirements for Pseudo-Wire Emulation Edge-to-Edge

(PWE3)

RFC 3985 PWE3 Architecture

RFC 4446 IANA Allocations for Pseudowire Edge to Edge Emulation

(PWE3)

RFC 4720 Pseudowire Emulation Edge-to-Edge (PWE3) Frame Check

Sequence Retention

RFC 4863 Wildcard Pseudowire Type

RFC 5085 Pseudowire Virtual Circuit Connectivity Verification (VCCV) A

Control Channel for Pseudowires

RFC 4197 Requirements for Edge-to-Edge Emulation of Time Division

Multiplexed (TDM) Circuits over Packet Switching Networks

RFC 4553 Structure-Agnostic Time Division Multiplexing (TDM) over

Packet (SAToP)

RFC 5086 Structure-Aware Time Division Multiplexed (TDM) Circuit

Emulation Service over Packet Switched Network
(CESoPSN)

RFC 5087 Time Division Multiplexing over IP (TDMoIP)

RFC 4623 Pseudowire Emulation Edge-to-Edge (PWE3) Fragmentation

and Reassembly

draft-ietf-pwe3-segme Multi-segment pseudowire

nted-pw

draft-ietf-l2vpn-vpls-ld Additional mechanisms for optimization of the VPLS

140 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Standard No. Standard Name

p-mac-opt Resilience/MAC Withdrawal

QoS

RFC 1349 Type of Service in the Internet Protocol Suite

RFC 2474 Definition of the Differentiated Services Field (DS Field) in the
IPv4 and IPv6 Headers

RFC 2698 A Two Rate Three Color Marker

RFC 2697 A Single Rate Three Color Marker

Security

RFC 5709 OSPFv2 authentication HMAC-SHA

draft-ietfsecsh-filexfer FTP over SSH (SFTP)

E-OAM

IEEE 802.3ah EFM Serial/Telnet/CLI

IEEE 802.1ag CFM

ITU-T Y.1731 OAM functions and mechanisms for Ethernet based networks

Clock/Time Syn

IEEE 1588 Standard for a Precision Clock Synchronization Protocol for

Networked Measurement and Control Systems

G.8261 Timing and synchronization in packet networks

G.8262 Timing characteristics of synchronous ethernet equipment

slave clock (EEC)

RFC1119 Network Time Protocol (version 2) specification and

implementation

ZTE Confidential & Proprietary 141

ZXA10 C300&C320 Product Description

Standard No. Standard Name

RFC 5905 The NTP Client support NTP Version 4

SNMP

RFC1157 Simple Network Management Protocol (SNMPv1)

RFC1901 Introduction to community-based SNMPv2

RFC1902 Structure of management information for Version 2 of the

Simple Network Management Protocol (SNMPv2)

RFC1903 Textual conventions for Version 2 of the Simple Network

Management Protocol (SNMPv2)

RFC1904 Conformance statements for Version 2 of the Simple Network

Management Protocol (SNMPv2)

RFC1905 Protocol Operations for Version 2 of the Simple Network

Management Protocol

RFC1906 Transport mappings for Version 2 of the Simple Network

Management Protocol (SNMPv2)

RFC1907 Management Information Base (MIB) for Version 2 of the

Simple Network Management Protocol (SNMPv2)

RFC2570 Introduction to Version 3 of the Internet-standard Network

Management Framework

RFC2571 An Architecture for Describing SNMP Management

Frameworks

RFC2572 Message Processing and Dispatching for the Simple Network

Management Protocol (SNMP)

RFC2573 SNMP Applications

RFC2574 User-based Security Model (USM) for version 3 of the Simple

Network Management Protocol (SNMPv3)

142 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Standard No. Standard Name

RFC2575 View-based Access Control Model (VACM) for the Simple

Network Management Protocol (SNMP)

MIB

RFC1212 Concise MIB Definitions

RFC1213 Management Information Base (MIB) for network

management of TCP/IP-based internets: MIB-II

SSH

RFC4254 The Secure Shell (SSH) Connection Protocol

RFC4253 The Secure Shell (SSH) Transport Layer Protocol

RFC4252 The Secure Shell (SSH) Authentication Protocol

RFC4251 The Secure Shell (SSH) Protocol Architecture

RADIUS/TACACS+

RFC1492 An Access Control Protocol, Sometimes Called TACACS

RFC2865 Remote Authentication Dial In User Service (RADIUS)

Telnet

RFC854 Telnet Protocol Specification

10.2 Hardware Interface Standards

Table 10-2 lists the hardware interface standards that the ZXA10 C300/C320 complies
with.

ZTE Confidential & Proprietary 143

ZXA10 C300&C320 Product Description

Table 10-2 Hardware Interface Standards

Item Description Standard

Ethernet Port 10BASE-T IEEE802.3i

10BASE-T IEEE802.3u

1000BASE-LX IEEE802.3z

1000BASE-SX IEEE802.3z

1000BASE-T IEEE802.3ab

10GBASE-SR IEEE802.3ae

10GBASE-LR IEEE802.3ae

10GBASE-ER IEEE802.3ae

SDH STM-1/STM-4 ITU-T

G.703/G.957/G.783/G.813/G.
825

CES ITU-T G.703/G.823

GPON Class B+ ITU-T G.984.2

Class C+ ITU-T G.984.2 amend2

10.3 Structure and Reliability Standards

Table 10-3 lists the structure and reliability standards that the ZXA10 C300/C320
complies with.

144 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Table 10-3 Structure and Reliability Standards

Standard No. Standard Name

Environment Standards

ETS 300 019 Environmental Engineering (EE) Environmental conditions

and environmental tests for telecommunications equipment

IEC 60297-3 Mechanical structures for electronic equipment Dimensions

of mechanical structures of the 482,6 mm (19 in) series Part 3

IEC 60529 Degrees of protection provided by enclosures (IP Code)

IEC 60068 Basic Environmental Testing Procedures

IEC 60721-3-3 Classification of environmental conditions Part3:

Classification of groups of environmental parameters and
their severities-Section 3: Stationary use at
weather-protected locations

NEBS GR-63-Core NEBS Requirements: Physical Protection

Electromagnetic Compatibility Standards

2004/108/EC Electromagnetic Compatibility (EMC)

EN 300 386 Electromagnetic compatibility and Radio spectrum Matters

(ERM)

Telecommunication network equipment

ElectroMagnetic Compatibility (EMC) requirements

ETSI ES 201 486 Electromagnetic compatibility and Radio spectrum Matters

(ERM)

Additional ElectroMagnetic Compatibility (EMC) requirements

and resistibility requirements for telecommunications
equipment for enhanced availability of service in specific
applications

ZTE Confidential & Proprietary 145

ZXA10 C300&C320 Product Description

Standard No. Standard Name

IEC 61000 Electromagnetic compatibility (EMC)

VCCI V-3 Spectrum Management and Telecommunications

Interference-Causing Equipment Standard Information
Technology Equipment (ITE) – Limits and methods of
measurement

EN 55022 Information technology equipment - Radio disturbance

characteristics - Limits and methods of measurement

EN 55024 Information technology equipment - Immunity characteristics

- Limits and methods of measurement

NEBS GR-1089-Core Electromagnetic Compatibility and Electrical Safety - Generic

Criteria for Network Telecommunications Equipment

CISPR 22 Information technology equipment-Radio disturbance

characteristics-Limits and methods of measurement

CISPR 24 Information technology equipment-immunity characteristics -

Limits and methods of measurement

ITU-T K.32 Immunity requirements and test methods for electrostatic

discharge to telecommunication equipment - Generic EMC
Recommendation

ITU-T K.44 SERIES K: PROTECTION AGAINST INTERFERENCE

Resistibility test for telecommunication equipment exposed to
overvoltages and overcurrents - Basic recommendation

FCC part 15 Class A The Federal Code Of Regulation (CFR) FCC Part 15
is a common testing standard for most electronic equipment.
Class A Digital Device. 'A digital device that is marketed for
use in a commercial, industrial or business environment,
exclusive of a device which is marketed for use by the
general public or is intended to be used in the home.'

ICES-003 VCCI COUNCIL RULES Normative Annex 1: Technical

Requirements

146 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

Standard No. Standard Name

Security Standards

EN 60950-1 Information Technology Equipment - Safety - Part 1: General

requirements

IEC 60950-1 Information Technology Equipment - Safety - Part 1: General

requirements

UL 60950-1 2nd Edition, 2007-03-27 (Information Technology Equipment

- Safety - Part 1: General Requirements)

EN 60825 Safety of laser products

IEC 60825 Safety of laser products

ITU-T K.27 Bonding configurations and earthing inside a

telecommunication building

ITU K.20 Resistibility of telecommunication equipment installed in a

telecommunications centre to overvoltages and overcurrents

ITU K.44 Resistibility tests for telecommunication equipment exposed

to overvoltages and overcurrents – Basic Recommendation

ETS 300 253 Equipment Engineering (EE) - Earthing and bonding of

telecommunication equipment in telecommunication centres

73/23/EEC Low Voltage Directive

93/68/EEC CE Marking Directive

Power Source Standards

ETS 300 132 Equipment Engineering (EE); Power Supply Interface at the
Input to Telecommunications Equipment

ETSI TR 100 283 Environmental Engineering (EE); Transient voltages at

Interface 'A' on

Transient voltages at Interface 'A' on telecommunications

ZTE Confidential & Proprietary 147

ZXA10 C300&C320 Product Description

Standard No. Standard Name

direct current (dc) power distributions

Package Standards

ISTA Procedure ISTA: international safe transit association LEVEL 2A/2B

2A/2B

Other Standards

MIL-HDBK-217F Reliability Prediction of Electronic Equipment

11 Glossary
 1PPS - 1 Pulse Per Second

 3GPP - 3rd Generation Partnership Project

 AC - Access Control, Admission Control, Access Circuit, Authentication

Center, Application Context, Antenna Carrier, Access Class, Attachment
Circuit, Alternating Current, Acknowledgement Center, Access Controller,
Audio Call, Access Category, Apply Charging

 ACL - Access Control List, Available Codecs List, Access Code List

 AG - Access Gateway, Absolute Grant, Audio Gateway

 AIS - Alarm Indication Signal

 APS - Automatic Protection Switching, Automatic Phase Shifter, Automatic

Paging System

 ARP - Address Resolution Protocol, Allocation and Retention Priority

 ASM - Asynchronous Transfer Mode (ATM) Switching Module, Any-Source

Multicast, Automatic Storage Management

 BFD - Bidirectional Forwarding Detection

148 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

 BGP - Border Gateway Protocol

 BITS - Building Integrated Timing Supply

 BOSS - Business and Operation Support System

 BRAS - Broadband Remote Access Server

 BSC - Base Station Controller, Binary Synchronous Communication

 BTS - Base Transceiver Station

 CAC - Channel Access Control, Connection Admission Control, Call

Admission Control, Call Access Control

 CATV - Cable Television

 CBS - Cell Broadcast Service, Committed Burst Size

 CDN - Contents Distribution Network

 CDR - Call Detail Record, Clock and Data Recovery

 CES - Channel Element Subsystem, Circuit Emulation Service

 CESoPSN - Circuit Emulation Services over Packet Switch Network

 CIR - Committed Information Rate, Carrier-to-Interference Ratio

 CLI - Command Line Interface, Command Language Interpreter, Calling Line

Identity

 CM - Connection Management, Configuration Management, Connection

Monitoring, Color Mode, Connection Matrix, Communication Management,
Centralized Monitor, Cable Modem

 CORBA - Common Object Request Broker Architecture

 DB - Database

 DBA - Database Agent, Dynamic Bandwidth Allocation

ZTE Confidential & Proprietary 149

ZXA10 C300&C320 Product Description

 DHCP - Dynamic Host Configuration Protocol

 DPU - Distributed Protocol Unit, Data Processing Unit, Distribution Point Unit

 DSL - Digital Subscriber Line

 DSLAM - Digital Subscriber Line Access Multiplexer

 DWRR - Deficit Weighted Round Robin, Dynamic Weighted Round-Robin

 DoS - Denial of Service, Data Over Signaling

 ECMP - Equal-Cost Multi-Path routing

 EIR - Equipment Identity Register, Excess Information Rate

 EMS - Electromagnetic Susceptibility, Element Management System,

Electronic Mailbox Service, Enterprise Management System

 EOC - Ethernet Over Coax

 ESMC - Ethernet Synchronization Message Channel

 ETSI - European Telecommunications Standards Institute

 FEC - Forward Error Correction, Forwarding Equivalence Class

 FTP - File Transfer Protocol, Foiled Twisted Pair, Floating Termination Point

 FTTB - Fiber to the Building

 FTTC - Fiber to the Curb

 FTTH - Fiber to the Home

 FTTM - Fiber to the Mobile

 FTTO - Fiber to the Office

 FTTdp - Fiber to the Distribution Point

 GEM - GPON Encapsulation Method

150 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

 GPON - Gigabit Passive Optical Network

 GUI - Graphical User Interface

 HGU - Hardware-Oriented Group Unblocking, Home Gateway Unit

 HSIA - High Speed Internet Access

 IAD - Integrated Access Device

 IEC - International Electrotechnical Commission, Immediate Event Charging,

International Electrotechnical Commission

 IGMP - Internet Group Management Protocol

 IMS - IP Multimedia Subsystem, Interactive Multimedia Service

 IPTV - Internet Protocol Television

 LACP - Link Aggregation Control Protocol

 LAG - Link Aggregation Group

 LAN - Local Area Network

 LLID - Logical Link Identifier

 LOID - Logical ONU Identifier

 LOS - Line-Out-of-Service Signal, Loss of Signal, Line of Sight

 LSP - Link Selector Parameter, Label Switched Path, Link State Packet,
Location Service Platform, Link State Protocol Data Unit

 LTE - Long Term Evolution, Long Time Evolution

 MDU - Multiple Dwelling Unit, Media Distribution Unit

 MEF - Metro Ethernet Forum

 MFF - MAC-Forced Forwarding

ZTE Confidential & Proprietary 151

ZXA10 C300&C320 Product Description

 MLD - Multicast Listener Discovery

 MPCP - Multi-Point Control Protocol

 MPLS - Multiprotocol Label Switching

 MSAN - Multi-Service Access Network, Multi-Service Access Node

 MSTP - Multi-Service Transport Platform, Multiple Spanning Tree Protocol

 MSTP - Multi-Service Transport Platform, Multiple Spanning Tree Protocol

 MTBF - Mean Time Between Failures

 MTOSI - Multi-Technology Operations System Interface

 MTTR - Mean Time To Recovery, Mean Time To Repair, Mean Time To

Restoration

 MTU - Maximum Transfer Unit, Multi-Tenant Unit, Maximum Transmission

Unit

 NA - Neighbor Advertisement

 ND - Neighbor Discovery

 NS - NS QUERY, Network Service, Neighbor Solicitation

 OCC - Optical Connection Controller, Optical Cross connecting Cabinet,

Online Collaboration Center, Originating Conversational Call

 ODN - Optical Distribution Network

 OLS - Optical Line Supervision

 OLT - Optical Line Terminal

 OMCC - ONU Management and Control Channel

 OMCI - ONT Management Control Interface, Open Manage Client

Instrumentation

152 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

 ONT - Optical Network Terminal

 ONU - Optical Network Unit

 OSPF - Open Shortest Path First

 OTDR - Optical Time Domain Reflectometer

 P2P - Peer-to-Peer, Point to Point

 PBS - Peak Burst Size, Portable Base Station , Prefessional Digital Trunking
Base Station

 PBX - Private Branch Exchange

 PDH - Plesiochronous Digital Hierarchy

 PDU - Protocol Data Unit, Packet Data Unit, Power Distribution Unit,
Professional Development Unit

 PIR - Peak Information Rate, Packet Insertion Rate

 PLC - Power Line Communication

 PLL - Phase Locked Loop

 PON - Passive Optical Network

 PPPoE - Point to Point Protocol over Ethernet

 PSE - Protection Switching Event, Power Sourcing Equipment

 PSN - Packet Switched Network, Packet Switch Network

 PTN - Packet Transport Network

 PWE - Pseudo Wire Emulation Function

 PWE3 - Pseudo Wire Emulation Edge-to-Edge

ZTE Confidential & Proprietary 153

ZXA10 C300&C320 Product Description

 RA - Routing Area, Request Agent, Reverse Activity, Router Advertisement,

Recursion Available , Route Analyser, Route Accelerator

 RADIUS - Remote Authentication Dial In User Service

 RAN - Radio Access Network

 RED - Random Early Detection

 RG - Registration Gateway, Rating Group, Residential Gateway

 RNC - Radio Network Controller

 RS - Reed Solomon, Recommended Standard, Regenerator Section,

Radiated Susceptiblility, Router Solicitation, Recording Server

 RSTP - Rapid Spanning Tree Protocol

 SAToP - Structure-Agnostic Time division multiplexing over Pack

 SBU - Single Business Unit, Signal Backplane Unit

 SDH - Synchronous Digital Hierarchy

 SFU - Single Family Unit, Switch Fabric Unit, Storage Fan Unit

 SN - Serial Number, Short Number, Subscriber Number, Short Name

 SNMP - Simple Network Management Protocol

 SP - Signal Processing module, Service Provider, Signaling Point, Service

Processing, Strict Priority, Service Profile, Spare Number, Service Processor

 SR - Service Router, Scheduling Request, Suppression Ratio, Speech

Recognition

 SS - Subscriber Station, Soft Switch, Service System, Supervision Station,

Supplementary Service, Subscriber Station, Stream Server

 SSM - Synchronization Status Message, Source Specific Multicast, SIGTRAN

SCTP Manager

154 ZTE Confidential & Proprietary

 ZXA10 C300&C320 Product Description

 STP - Signaling Trace Part, Signaling Transfer Point, Spanning Tree Protocol,
Shielded Twisted Pair, SATA Tunneling Protocol

 TDM - Time Division Multiplexing

 TL1 - Transaction Language 1

 TOD - Time of Day

 TPID - Tag Protocol Identifier

 TrTCM - Two-rate Three Color Marker

 UAPS - Uplink Auto Protection Switching, User Agent Profile Server

 UNI - User Network Interface

 VDSL - Very High Speed Digital Subscriber Line

 VDSL2 - Very High Bit Rate Digital Subscriber Line 2

 VOD - Video On Demand

 VPN - Virtual Private Network

 VoIP - Voice over Internet Protocol

 WRED - Weighted Random Early Detection

 iAMS - Intelligent AP Management System

ZTE Confidential & Proprietary 155