Signal Signal Relays: Axicom
Signal Signal Relays: Axicom
Typical applications
Communications equipment, office equipment, measurement and control
equipment, entertainment electronics, medical equipment, consumer
electronics.
Z
Approvals Coil Data
UL 508 File No. E 111441 Magnetic system neutral
Technical data of approved types on request Coil voltage range 3 to 48VDC
Max. coil temperature 85 °C
Contact Data Thermal resistance < 85K/W
Contact arrangement 2 form C (CO)
Max. switching voltage 220VDC, 250VAC Coil versions, monostable
Rated current 3A Coil Rated Operate Limiting Release Coil Rated coil
Limiting continuous current, 85°C 3A code voltage voltage Voltage voltage resistance power
Contact material AgNi, gold-covered VDC VDCmin. VDCmax. VDCmin. Ω±10% mW
Min. recommended contact load 10mA at 20mV 150mW coil power
Minimum switching voltage 100μV 001 5 4.0 11.7 0.25 167 150
Initial contact resistance <100mΩ at 10mA, 20mV 002 6 4.8 14.0 0.30 240 150
Frequency of operation without load max. 50 operations/s 006 9 7.2 21.0 0.45 540 150
Operate / release time max. 6ms/4ms 003 12 9.6 28.0 0.60 960 150
Bounce time max. 5 ms 005 24 19.2 56.0 1.20 3840 150
Electrical endurance 200mW coil power
at 230VAC/0.5A typ. 3x105 operations 308 3 2.1 6.1 0.15 45 200
at 6VDC/0.1A typ. 2x106 operations 301 5 3.5 10.1 0.25 125 200
at 30VDC/1A typ. 5x105 operations 302 6 4.2 12.2 0.30 180 200
at 30VDC/2A typ. 1x105 operations 306 9 6.3 18.2 0.45 405 200
Contact ratings, UL 30VDC/1.0A 303 12 8.4 24.3 0.60 720 200
100VDC/0.3A 305 24 16.8 48.6 1.20 2880 200
150mW and 200mW coil 125VAC/0.5A 307 48 33.6 97.2 2.40 11520 200
400mW and 500mW coil 125VAC/1.0A 400mW coil power
Mechanical endurance typ. 15x106 operations 401 5 3.5 7.2 0.25 62 400
402 6 4.2 8.6 0.30 90 400
406 9 6.3 12.9 0.42 203 400
403 12 8.4 17.2 0.60 360 400
405 24 16.8 34.3 1.20 1440 400
407 48 33.6 68.6 2.40 5760 400
>500mW coil power
501 5 3.5 6.1 0.25 36 695
502 6 4.2 7.3 0.30 70 515
506 9 6.3 10.9 0.45 140 580
503 12 8.4 14.5 0.60 280 515
505 24 16.8 29.1 1.20 1050 550
507 48 33.6 58.1 2.40 4000 575
All igures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
1
10-2012, Rev. 1012 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section,
www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are
© 2012 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change.
a TE Connectivity Ltd. company. http://relays.te.com/definitions
Signal
Signal Relays AXICOM
1.4
1.2
Insulation Data
1.0 Unom. nominal coil voltage Initial dielectric strength
0.8
between open contacts 750Vrms
0.6 Uop. min. between contact and coil 1050Vrms
0.4
Urel. min. between adjacent contacts 750Vrms
0.2
Initial surge withstand voltage
0.0 between open contacts 1500V
-30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
between contact and coil 1500V
Ambient Temperature [°C] between adjacent contacts 1500V
3 200 mW coil
200 mW Initial insulation resistance at 500 VDC > 109Ω
2.8
Capacitance
2.6
Umax. at 0 A between open contacts max. 2pF
2.4
Umax. at 2 x 1 A between contact and coil max. 4pF
2.2 Umax. at 2 x 2 A
between adjacent contacts max. 2 pF
Coil Voltage [U/Unom]
1.8
1.6
RF Data
1.4
Isolation at 100MHz/900MHz -39.0dB/-20.7dB
1.2
Insertion loss at 100MHz/900MHz -0.02dB/-0.27dB
1 Unom. nominal coil voltage
Voltage standing wave ratio (VSWR)
0.8
at 100MHz/900MHz 1.04/1.40
0.6
Uop. min.
0.4
Urel. min.
0.2
0
Other Data
-30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
Ambient Temperature [°C] refer to the Product Compliance Support Center at
3.0
400 mW coil www.te.com/customersupport/rohssupportcenter
400 mW
2.8 Ambient temperature -40 to +85°C
2.6 Category of environmental protection
Umax. at 0 A
2.4
Umax. at 2 x 1 A IEC 61810 RT III - immersion cleanable
2.2 Umax. at 2 x 2 A Degree of protection, IEC 60529 IP 67
Coil Voltage [U/Unom]
2.0
1.8
1.6
1.4
1.2
0.0
-30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
Ambient Temperature [°C]
2
10-2012, Rev. 1012 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section,
www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are
© 2012 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change.
a TE Connectivity Ltd. company. http://relays.te.com/definitions
Signal
Signal Relays AXICOM
Dimensions Packing
Type
V23105-A5 D2n Series Signal Relay
Coil
Coil code: please refer to coil versions table
Coil power
0xx 150 mW 4xx 400 mW
3xx 300 mW 5xx 550 mW
Contacts
A201 2 form C, 2 CO, AgNi+Au contacts
3
10-2012, Rev. 1012 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section,
www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are
© 2012 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change.
a TE Connectivity Ltd. company. http://relays.te.com/definitions