1 GENER Tag No.
xxxxxx (To be Clarification)
2 AL Service
3 Line No.
7 Line Size 10 In To be Clarification
8 Pipe Material Carbon Steel
PIPE
9 Pipe Insulation None
10 Design Pressure 300 Psig To be Clarification
11 Design Temperature 90 °F
12 Process Fluid Process Gas
13 Units @Maximum @Normal Flow @Minimum Flow
PROCESS CONDITION
14 Flow Rate Msft3/d 20 10 5
15 Inlet Pressure psig 300 150 150
16 Pressure Drop psig 5 10 10
17 Inlet Temperature °F 90,00 80 80
19 Inlet Density lb/ft3 1.135 0.58976 0.59171
22 Inlet Specific Heat Ratio 1.2669 1.2726 1.2699
24 Critical pressure Psia 673.48 676.95 673.48
26
27
28 Calculated Cv Note 1
CALCULATE
D RESULTS
29 Travel Note 1
30 Sound Pressure Lavel dBa
31
32
33 MFR Model Fisher or Equal Note 1 66 MFR Model N/A N/A
SOLENOID VALVE
34 Body Type Material Globe Carbon Steel 67 Quantity N/A
35 Body Size 6 in Note 1 68 Local Manufacture Reset
36 End Connection & Rating RF 300# 69 Area Classification N/A
37 Bonnet Type Material Standard Carbon Steel 70 Material / Trim Body N/A
38 Flow Direction Flow to Open Note 1 71 Body Size / No. of Part N/A
BODY AND TRIM
39 Bolt & Nut Material ASTM A194 2H 72 Cable Entry / Coil Installation N/A
40 Packing Material PTFE 73 Tag. No N/A
Extension Bonnet Note 1 MFR N/A
SWITCHES
41 74 Model N/A
42 Trim Type Single Seated 75 Type Quantity N/A N/A
43 Trim Size Note 1 76 Contact / Rating N/A
44 Rated Cv Note 1 77
45 Characteristic Quick Opening 78 MFR Model Note 1 Note 1
46 Rated Travel Note 1 79 Air Set Yes
Plug / Ball / Disc Material 316 SS Filter
REGULATOR
47 80 Gauge Yes Yes
AIR FILTER
48 Seat Material 316 SS 81 End Connection 1/4" NPTF
49 Case Material Stem Material 316 SS 316 SS 82 Body Alumunium
50 MFR Model Note 1 Note 1 83 Trim 316 SS
51 Type Size Diaphragm Note 1 84 Packing PTFE
52 Close At Open At MTR STD MTR STD 85
ACTUATOR
53 On-Off Modulating N/A Yes 86
54 Req'd Air Supply Press 80 - 272 Psig 87 Handwheel No
OTHER ACC
55 Failure Position Closed 88 Lubricator Fitting No
56 Act.Orientation Vertical Up 89 Lock-up System
57 Stroke Speed Travel Indicator Note 1 Yes 90 Quick Exhaust Valve No
58 Flow Action To Open 91 Speed Control No
59 MFR Model Note 1 Note 1 92 Marking & Identification No
POTENSIONER
60 Potensioner Type Smart E/P Potensioner 93 Body Paint & Color Note 1
PAINT
61 Signal Input Output 4 - 20 mA dc Note 1 94 Actuator Paint & Color Note 1
62 Air Supply Min/Norm/Max 80/100/272 Psig 95
63 Enclosure / Area Classification NEMA 7 and NEMAA 4X 96
TESTS
64 Filter Reg / Gauge / Bypass Yes / Yes 97
65 Electrical/ Phenumatic Conn 1/2" NPT /1/4" NPT 98
Note :
1. To be clarification
A 28-Aug-20 AGL
Rev Description DATE PREPARED CHECKED APPROVED
CLIENT : Pertamina EP
DATA SHEET
PROJECT Upgrading Metering
PT. DWI TUNGGAL JAYA AGUNG
DATA SHEET No.
PRESSURE CONTROL VALVE
PROJECT No. REVISION A
