Scribd
Upload
49 views1 page

4597 AAB SC 07 Addendum 2 R0v0 44

This document summarizes the strength analysis of a rolled rectangular hollow section (RHS) beam with dimensions 200x400x12.0 mm. It determines the nominal bending strength about the z-axis as 620.46 kNm limited by either flange or web local buckling. The nominal shear strengths along the y-axis and z-axis are also determined based on the member dimensions and material properties. No provision is made for lateral-torsional buckling analysis in the design code.

Uploaded by

danieldumapit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views1 page

4597 AAB SC 07 Addendum 2 R0v0 44

This document summarizes the strength analysis of a rolled rectangular hollow section (RHS) beam with dimensions 200x400x12.0 mm. It determines the nominal bending strength about the z-axis as 620.46 kNm limited by either flange or web local buckling. The nominal shear strengths along the y-axis and z-axis are also determined based on the member dimensions and material properties. No provision is made for lateral-torsional buckling analysis in the design code.

Uploaded by

danieldumapit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

A‐2 

Strength Analysis of AAB‐SE‐AS‐StCS‐0130 (Rolled RHS 200x400x12.0).xmcd
Design Code: American Standards
TempVer20.0_012018 | Engineer: S.M.Lomboy Jr.
Design and Engineering Dept.

Bending about Z Axis (Major Axis)


a) Local Buckling Analysis, SecƟon F.7

Local Buckling Parameters
Description Symbol A B Unit Reference
Stiffened 
Stiffened  Table B4.1b, Case 17 / 
Element Type Element type Element, 
Element, Web Case 19
Flange
Thickness of Element t 12.00 12.00 mm Figure C.2
Width of Element b 164.00 364.00 mm Figure C.2
Element Slenderness l 13.67 30.33
Limiting Width to Thickness Ratio lp 26.58 57.44
lr 33.23 135.29
Element Classification Compact Compact
Nominal  Strength Due to Yielding Mzn_Y 620.46 620.46 kNm Eq F7‐1
Nominal  Strength Due to Flange Local Buckling Mzn_fLB 620.46 ‐ kNm Eq F7‐5
Nominal  Strength Due to Web Local Buckling Mzn_wLB ‐ 620.46 kNm Eq F7‐2, Eq F7‐3
Nominal Stress Due to Yielding/ Local Buckling Mzn_YLB 620.46 620.46 kNm

MznYLB  min ( MzA MzB)  kN m  620.46 kN m ← Nominal Flexural Strength Due to Y/FLB/WLB

b) Global Buckling Analysis (Lateral Torsional Buckling) No provision for this analysis in the code!

The Specifica on provides no strength equa on for the LTB limit state as beam deflec on will control.


c) Nominal Strength

 
Mzn Lb  MznYLB ← Nominal Flexural Strength

C.2 Shear Strength, Chapter G
 tA  
tB bA bB  tA tB bA bB  mm 
Shearing along Y Axis (Minor Axis)

λB  30.33 < 260 ← Element Slenderness, Sec on G5, G2

k v  5.0

Cv  1.0 if λB  1.10  kv Es  Fy  1.00

1.10  kv Es  Fy


λB
if 1.10  kv Es  Fy  λB  1.37  kv Es  Fy
1.51 Es k v
2
if λB  1.37  kv Es  Fy
λB  F y

2
Ayw  2bB tB  8736.00 mm

 
Vyn Lb  0.60F y  Cv Ayw ← Nominal Shear Strength

Shearing along Z Axis (Major Axis)

λA  13.67 < 260 ← Element Slenderness, Sec on G5, G2

k v  5.0

Cv  1.0 if λA  1.10  kv Es  Fy  1.00

1.10  kv Es  Fy


λA
if 1.10  kv Es  Fy  λA  1.37  kv Es  Fy
1.51 Es k v
2
if λA  1.37  kv Es  Fy
λA  F y

2
Azw  2 bA tA  3936.00 mm

 
Vz n Lb  0.60F y  Cv Azw ← Nominal Shear Strength 44 of 100

You might also like