* X450G2-48p-10G4.

5 #
* X450G2-48p-10G4.5 # show version
Switch : 800601-00-16 1830N-41522 Rev 16.0 BootROM: 1.0.2.1 IMG: 21.1.3.7
PSU-1 : Internal PSU-1 800562-00-07 1622A-40759
PSU-2 :

Image : ExtremeXOS version 21.1.3.7 by release-manager

on Mon Jan 30 10:47:48 EST 2017
BootROM : 1.0.2.1
Diagnostics : 5.4
* X450G2-48p-10G4.6 #
* X450G2-48p-10G4.6 #
* X450G2-48p-10G4.6 # ls /usr/local/ext
-rwxr-xr-x 1 root root 37555270 Aug 29 10:10 CoreB_JagungRebus_RSI.txt
-rwxr-xr-x 1 root root 521919 Aug 28 04:50 Curriculum Vitae_Teguh
Yulianto.rtf
-rwxr-xr-x 1 root root 233247 Aug 28 04:41 Employment Application Form
(002)_Teguh Yulianto.docx
-rwxr-xr-x 1 root root 10434 Aug 28 04:40 Remuneration Details
(002)_Teguh Yulianto.xlsx
drwxr-xr-x 2 root root 16384 Aug 28 04:52 System Volume Information
drwxr-xr-x 3 root root 16384 Aug 28 08:11 autorun.inf
-rwxr-xr-x 1 root root 77258801 Sep 4 10:04 summitX-22.6.1.4-patch1-
8.xos

1K-blocks Used Available Use%

30653440 113008 30540432 0%
* X450G2-48p-10G4.7 #
* X450G2-48p-10G4.7 #
* X450G2-48p-10G4.7 # download image memorycard summitX-22.6.1.4-patch1-8.xos
Note: The inactive partition (secondary) will be used for installation.
Do you want to install image after downloading? (y - yes, n - no, <cr> - cancel)
Yes

Downloading to Switch............................
Installing to secondary partition!

Installing to
Switch.............................................................................
...................................................................................
.............
Image installed successfully
This image will be used only after rebooting the switch!
* X450G2-48p-10G4.8 #
* X450G2-48p-10G4.8 #
* X450G2-48p-10G4.8 # reboot
No default configuration database has been selected to boot up the system.
Save configuration will set the new configuration as the default database.

Do you want to save configuration changes to currently selected configuration

file (primary.cfg) and reboot?
(y - save and reboot, n - reboot without save, <cr> - cancel command) Yes
Saving configuration on master .... done!
Sending SIGKILL to all processes
Requesting system reboot

Copyright 2014 Extreme Networks, Inc.

Starting CRC of Default image

Using Default image ...

Copyright 2014 Extreme Networks, Inc.

Press and hold the <spacebar> to enter the bootrom: 0

Loading Secondary OS Image

init started: BusyBox v1.28.3 (2019-04-16 14:56:43 EDT)

Starting ExtremeXOS 22.6.1b4
Copyright (C) 1996-2019 Extreme Networks. All rights reserved.
This product is protected by one or more US patents listed at
https://www.extremenetworks.com/company/legal/patents/ along with their foreign
counterparts.

(pending-AAA) login:

Authentication Service (AAA) on the master node is now available for login.

login: admin
password:

ExtremeXOS
Copyright (C) 1996-2019 Extreme Networks. All rights reserved.
This product is protected by one or more US patents listed at
https://www.extremenetworks.com/company/legal/patents/ along with their foreign
counterparts.
==============================================================================

Press the <tab> or '?' key at any time for completions.

Remember to save your configuration changes.

X450G2-48p-10G4.1 #
X450G2-48p-10G4.1 #
X450G2-48p-10G4.1 #
X450G2-48p-10G4.1 #
X450G2-48p-10G4.1 #
X450G2-48p-10G4.1 #
X450G2-48p-10G4.1 #
X450G2-48p-10G4.1 # show version
Switch : 800601-00-16 1830N-41522 Rev 16 BootROM: 1.0.2.1 IMG: 22.6.1.4
PSU-1 : Internal PSU-1 800562-00-07 1622A-40759 Rev 07
PSU-2 :

Image : ExtremeXOS version 22.6.1.4 22.6.1.4-patch1-8 by release-manager

on Tue Apr 16 14:33:16 EDT 2019
BootROM : 1.0.2.1
Diagnostics : 5.12
Certified Version : EXOS Linux 3.18.48, FIPS fips-ecp-2.0.16

X450G2-48p-10G4.2 #
X450G2-48p-10G4.2 #
X450G2-48p-10G4.2 # show version images
Card Partition Installation Date Version Name Branch
------------------------------------------------------------------------------
Switch primary Mon Jan 30 16:24:40 UTC 2017 21.1.3.7 summitX-21.1.3.7.xos
21.1.3.7
Switch secondary Fri Sep 6 07:57:57 UTC 2019 22.6.1.4 summitX-22.6.1.4-patch1-8.xos
22.6.1.4-patch1-8

X450G2-48p-10G4.3 #
X450G2-48p-10G4.3 #
X450G2-48p-10G4.3 #
X450G2-48p-10G4.3 # ls ?
<cr> Execute the command
<file_name> File or directory name (memory card is /usr/local/ext, internal
memory is /usr/local/tmp, and home directory is /usr/local/cfg)
../ ./ .history/ cc_logs/ lost+found/
primary.cfg ssl/ vmt/
X450G2-48p-10G4.3 # ls /usr/local/ext
-rwxrwxr-- 1 admin admin 37555270 Aug 29 10:10 CoreB_JagungRebus_RSI.txt
-rwxrwxr-- 1 admin admin 521919 Aug 28 04:50 Curriculum Vitae_Teguh
Yulianto.rtf
-rwxrwxr-- 1 admin admin 233247 Aug 28 04:41 Employment Application
Form (002)_Teguh Yulianto.docx
-rwxrwxr-- 1 admin admin 10434 Aug 28 04:40 Remuneration Details
(002)_Teguh Yulianto.xlsx
drwxrwxr-- 2 admin admin 16384 Aug 28 04:52 System Volume Information
drwxrwxr-- 3 admin admin 16384 Aug 28 08:11 autorun.inf
-rwxrwxr-- 1 admin admin 77258801 Sep 4 10:04 summitX-22.6.1.4-patch1-
8.xos

1K-blocks Used Available Use%

30653440 113008 30540432 0%
X450G2-48p-10G4.4 #
X450G2-48p-10G4.4 #
X450G2-48p-10G4.4 # download image memorycard summitX-22.6.1.4-patch1-8.xos
Note: The inactive partition (primary) will be used for installation.
Do you want to install image after downloading? (y - yes, n - no, <cr> - cancel)
Installation cancelled
X450G2-48p-10G4.5 # download image memorycard summitX-22.6.1.4-patch1-8.xos
Note: The inactive partition (primary) will be used for installation.
Do you want to install image after downloading? (y - yes, n - no, <cr> - cancel)
Yes

Downloading to Switch...........................................
Installing to primary partition!

Installing to
Switch.............................................................................
...................................................................................
...........................................................................
Image installed successfully
This image will be used only after rebooting the switch!
X450G2-48p-10G4.5 #
X450G2-48p-10G4.5 #
X450G2-48p-10G4.5 # reboot
Are you sure you want to reboot the switch? (y/N) Yes
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
Copyright 2014 Extreme Networks, Inc.

Starting CRC of Default image

Using Default image ...

Copyright 2014 Extreme Networks, Inc.

Press and hold the <spacebar> to enter the bootrom: 0

Loading Primary OS Image

init started: BusyBox v1.28.3 (2019-04-16 14:56:43 EDT)

Starting ExtremeXOS 22.6.1b4
Copyright (C) 1996-2019 Extreme Networks. All rights reserved.
This product is protected by one or more US patents listed at
https://www.extremenetworks.com/company/legal/patents/ along with their foreign
counterparts.

(pending-AAA) login:

Authentication Service (AAA) on the master node is now available for login.

login: admin
password:

ExtremeXOS
Copyright (C) 1996-2019 Extreme Networks. All rights reserved.
This product is protected by one or more US patents listed at
https://www.extremenetworks.com/company/legal/patents/ along with their foreign
counterparts.
==============================================================================

Press the <tab> or '?' key at any time for completions.

Remember to save your configuration changes.

X450G2-48p-10G4.1 #
X450G2-48p-10G4.1 #
X450G2-48p-10G4.1 #
X450G2-48p-10G4.1 # show version
Switch : 800601-00-16 1830N-41522 Rev 16 BootROM: 1.0.2.1 IMG: 22.6.1.4
PSU-1 :
PSU-2 :

Image : ExtremeXOS version 22.6.1.4 22.6.1.4-patch1-8 by release-manager

on Tue Apr 16 14:33:16 EDT 2019
BootROM : 1.0.2.1
Diagnostics : 5.12
Certified Version : EXOS Linux 3.18.48, FIPS fips-ecp-2.0.16

X450G2-48p-10G4.2 #
X450G2-48p-10G4.2 #
X450G2-48p-10G4.2 #
X450G2-48p-10G4.2 #
X450G2-48p-10G4.2 #
X450G2-48p-10G4.2 #
X450G2-48p-10G4.2 # enable stacking
You have not yet configured all required stacking parameters.
Would you like to perform an easy setup for stacking operation? (y/N) No

Stacking has been enabled as requested.

This command will take effect at the next reboot of the specified node(s).
X450G2-48p-10G4.3 #
X450G2-48p-10G4.3 # configure stacking
stacking Settings for stacking
stacking-support Stacking-related support
X450G2-48p-10G4.3 # configure stacking ?
alternate-ip-address Alternate IP address
easy-setup Initially configure all nodes in a new stack
license-level License level restriction
mac-address Assign Stack MAC address to be that of the node specified
node-address Selected node (all nodes if not specified)
priority Master Priority
redundancy Redundant nodes master-capability
slot Selected node (all nodes if node-address and slot not
specified)
slot-number Slot number
X450G2-48p-10G4.3 # configure stacking
%% Incomplete command
X450G2-48p-10G4.4 # reboot
Are you sure you want to reboot the switch? (y/N) Yes
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot

Copyright 2014 Extreme Networks, Inc.

Starting CRC of Default image

Using Default image ...

Copyright 2014 Extreme Networks, Inc.

Press and hold the <spacebar> to enter the bootrom: 0

Loading Primary OS Image

init started: BusyBox v1.28.3 (2019-04-16 14:56:43 EDT)

Starting ExtremeXOS 22.6.1b4
Copyright (C) 1996-2019 Extreme Networks. All rights reserved.
This product is protected by one or more US patents listed at
https://www.extremenetworks.com/company/legal/patents/ along with their foreign
counterparts.

(pending-AAA) login:

(pending-AAA) login:

(pending-AAA) login:
Maximum number of login attempts reached!
(pending-AAA) login:

Authentication Service (AAA) on the master node is now available for login.

login: admin
password:

ExtremeXOS
Copyright (C) 1996-2019 Extreme Networks. All rights reserved.
This product is protected by one or more US patents listed at
https://www.extremenetworks.com/company/legal/patents/ along with their foreign
counterparts.
==============================================================================

Press the <tab> or '?' key at any time for completions.

Remember to save your configuration changes.

This switch currently has some management methods enabled for convenience reasons.
Please answer these questions about the security settings you would like to use.
You may quit and accept the default settings by entering 'q' at any time.

!!!! NOTE: Spanning Tree default changed in ExtremeXOS 22.2 !!!!

Multiple Spanning Tree Protocol (MSTP) is enabled by default to prevent

broadcast storms

Would you like to disable MSTP? [y/N/q]: quit

The switch offers an enhanced security mode. Would you like to read more,
and have the choice to enable this enhanced security mode? [y/N/q]:

Telnet is enabled by default. Telnet is unencrypted and has been the target of
security exploits in the past.

Would you like to disable Telnet? [y/N/q]:

SNMP access is disabled by default. SNMPv1/v2c uses no encryption, SNMPv3 can be

configured to eliminate this problem.

Would you like to enable SNMPv1/v2c? [y/N/q]:

Would you like to enable SNMPv3? [y/N/q]:

All ports are enabled by default. In some secure applications, it maybe more
desirable for the ports to be turned off.

Would you like unconfigured ports to be turned off by default? [y/N/q]:

No failsafe account username and password are in effect. If you choose to

configure them, please remember them because they cannot be recovered.
Would you like to configure the failsafe username and password now? [y/N/q]:

Since you have chosen less secure management methods, please remember to
increase the security of your network by taking the following actions:
 * change your admin password

* Slot-1 Stack.1 #
* Slot-1 Stack.1 #
* Slot-1 Stack.1 # show stacking
Stack Topology is a Daisy-Chain
Active Topology is a Daisy-Chain
Node MAC Address Slot Stack State Role Flags
------------------ ---- ----------- ------- ---
*00:04:96:ae:81:7f 1 Active Master CA-
* - Indicates this node
Flags: (C) Candidate for this active topology, (A) Active Node
(O) node may be in Other active topology
* Slot-1 Stack.2 # configure stacking
stacking Settings for stacking
stacking-support Stacking-related support
* Slot-1 Stack.2 # configure stacking node-address 00:04:96:ae:81:7f slot-number 3
This command will take effect at the next reboot of the specified node(s).

* Slot-1 Stack.3 #
* Slot-1 Stack.3 # reboot
No default configuration database has been selected to boot up the system.
Save configuration will set the new configuration as the default database.

Do you want to save configuration changes to currently selected configuration

file (primary.cfg) and reboot?
(y - save and reboot, n - reboot without save, <cr> - cancel command) Yes
Saving configuration primary.cfg on master .......... done!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot

Copyright 2014 Extreme Networks, Inc.

Starting CRC of Default image

Using Default image ...

Copyright 2014 Extreme Networks, Inc.

Press and hold the <spacebar> to enter the bootrom: 0

Loading Primary OS Image

init started: BusyBox v1.28.3 (2019-04-16 14:56:43 EDT)

Starting ExtremeXOS 22.6.1b4
Copyright (C) 1996-2019 Extreme Networks. All rights reserved.
This product is protected by one or more US patents listed at
https://www.extremenetworks.com/company/legal/patents/ along with their foreign
counterparts.

(pending-AAA) login:

Authentication Service (AAA) on the master node is now available for login.

login:
login: admin
password:

ExtremeXOS
Copyright (C) 1996-2019 Extreme Networks. All rights reserved.
This product is protected by one or more US patents listed at
https://www.extremenetworks.com/company/legal/patents/ along with their foreign
counterparts.
==============================================================================

Press the <tab> or '?' key at any time for completions.

Remember to save your configuration changes.

Slot-3 Stack.1 #
Slot-3 Stack.1 #
Slot-3 Stack.1 #
Slot-3 Stack.1 # show stacking
Stack Topology is a Daisy-Chain
Active Topology is a Daisy-Chain
Node MAC Address Slot Stack State Role Flags
------------------ ---- ----------- ------- ---
*00:04:96:ae:81:7f 3 Active Master CA-
* - Indicates this node
Flags: (C) Candidate for this active topology, (A) Active Node
(O) node may be in Other active topology
Slot-3 Stack.2 #
Slot-3 Stack.2 #
Slot-3 Stack.2 #
Slot-3 Stack.2 #