Scribd
Upload
76 views2 pages

RTTNA-037 Rev 1 (Cold Vulcanizing Fluid-Flammable) 02022017 JFO

This technical data sheet provides information on Rema Tip Top Cold Vulcanizing Fluid-Flammable (CVF-F), which is intended for installing tube repair units in hot or cold vulcanizing procedures. It has optimum adhesion for tube repairs and a two-year shelf life. The instructions explain how to clean and buff the repair area, apply an even coat of the fluid, and allow it to dry before returning the tire to service. Safety instructions indicate it should not be used for certain tire repair materials.

Uploaded by

Alexis Fernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
76 views2 pages

RTTNA-037 Rev 1 (Cold Vulcanizing Fluid-Flammable) 02022017 JFO

This technical data sheet provides information on Rema Tip Top Cold Vulcanizing Fluid-Flammable (CVF-F), which is intended for installing tube repair units in hot or cold vulcanizing procedures. It has optimum adhesion for tube repairs and a two-year shelf life. The instructions explain how to clean and buff the repair area, apply an even coat of the fluid, and allow it to dry before returning the tire to service. Safety instructions indicate it should not be used for certain tire repair materials.

Uploaded by

Alexis Fernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data Sheet

REMA TIP TOP COLD VULCANIZING FLUID-Flammable


(CVF-F)

TDS #: RTTNA – 037 Rev. # 1 Rev. Date: 02/02/2017

PART NUMBERS: 203-F, 204-F

CONTAINERS/PACKAGING: 203F – 8 fl. oz. can 204F – 32 fl. oz. can

FIELD OF APPLICATION: RTT Cold Vulcanizing Fluid - Flammable is intended for the
installation of RTT Tube Repair Units and RTT Tube Valve
Repair Units in either a hot or cold vulcanizing procedure.

PRODUCT ADVANTAGES: Suitable for chemical (cold) applications


Optimum adhesion for tube repairs
Long shelf life

INSTRUCTIONS FOR USE: Clean the area to be buffed with Rema Pre-Buff Cleaner
Use a low-speed buffer (< 5,000 rpm) to buff the area to be
repaired
After the repair area has been properly buffed, clean the area
with a brass brush to remove any buff particles
NOTE: Do not use Pre-Buff Cleaner, solvents, or compressed
air on the buff texture
Apply an even coat of CVF-Flammable to the buffed area
Allow to dry (drying time depends on atmospheric conditions)
NOTE: Do not use compressed air, heat guns, or other artificial
means to aid in the drying process
Close container tightly after using

SAFETY INSTRUCTIONS: Do not use for the application of any tire repair materials,
i.e. Radial or Bias Repairs, Minicombis, Stems, Sealastic, A&B
Compound, Camplast, T-2 Compound, Super RAS, Envelope,
etc.

SHELF LIFE: Two (2) years in unopened container from date of manufacture

BASE SOLVENT: Heptane/Acetone Blend (refer to SDS for detailed data)

RECOMMENDED STORAGE
CONDITIONS: Store in a dark, moisture free environment, away from direct
sunlight
Protect from freezing
Comply with all local, state, and federal regulations
Page 1 of 2 TDS #: RTTNA - 001
Technical Data Sheet
REMA TIP TOP COLD VULCANIZING FLUID-Flammable
(CVF-F)

TDS #: RTTNA – 037 Rev. # 1 Rev. Date: 02/02/2017

DRYING TIME: Drying time depends on atmospheric


Conditions.

WAIT TIME for RETURNING


TIRE TO SERVICE: No wait time is required when used in conjunction with Rema
Tip Top Tube Repairs

ADDITIONAL INFO: Do not dilute. Use full strength only!

NOTICE: REMA TIP TOP / NORTH AMERICA believes that the information contained on this data sheet is
accurate. It is based on extensive tests and represents standard values. However, it may not contain information on all
confirmed properties. REMA TIP TOP / North America reserves the right to carry out improvements and technical
development to this product at its discretion. For detailed application instructions, always refer to the appropriate
Rema Tip Top Instruction Manuals and/or Repair Instruction CD’s. The suggested procedures are based on experience
as of the date of publication. They are not necessarily all-inclusive, nor fully adequate in every circumstance. Also,
the suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or
insurance requirements.

NO WARRANTY IS MADE, EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A


PARTICULAR PURPOSE OR OTHERWISE.

Page 2 of 2 TDS #: RTTNA - 001

You might also like