0% found this document useful (0 votes)
73 views16 pages

SAFE Analysis & Design Report: License #C85

This document provides a summary of the analysis and design of a pile foundation model. It defines the model properties, assignments, loading, analysis results, and design summary. The model properties section defines the material properties of concrete and rebar, section properties, and support properties. The design summary provides preferences, overwrites, and a summary of the slab, beam, and punching design.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
73 views16 pages

SAFE Analysis & Design Report: License #C85

This document provides a summary of the analysis and design of a pile foundation model. It defines the model properties, assignments, loading, analysis results, and design summary. The model properties section defines the material properties of concrete and rebar, section properties, and support properties. The design summary provides preferences, overwrites, and a summary of the slab, beam, and punching design.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 16

License #C85

SAFE Analysis & Design Report

Model Name: pile.fdb


12 March 2014
pile.fdb SAFE v12.3.2 - License #C85

5. Design summary 12 March 2014

Contents
Model Definition............................................................................................................................................................. 5
1. Model properties....................................................................................................................................................... 6
1.1. Material properties............................................................................................................................................ 6
1.2. Section properties............................................................................................................................................. 6
1.3. Support properties............................................................................................................................................. 6
2. Model assignments................................................................................................................................................... 8
2.1. Slab assignments.............................................................................................................................................. 8
2.2. Support assignments......................................................................................................................................... 8
3. Model loading............................................................................................................................................................ 9
3.1. Load patterns.................................................................................................................................................... 9
3.2. Load cases........................................................................................................................................................ 9
3.3. Load combinations.......................................................................................................................................... 10
4. Analysis results....................................................................................................................................................... 10
4.1. Support results................................................................................................................................................ 10
4.2. Structure results.............................................................................................................................................. 11
5. Design summary..................................................................................................................................................... 14
5.1. Preferences..................................................................................................................................................... 14
5.2. Overwrites....................................................................................................................................................... 15
5.3. Slab design..................................................................................................................................................... 15
5.4. Beam design................................................................................................................................................... 16
5.5. Punching check/design................................................................................................................................... 16

List of Tables
Table 1: Material Properties 03 - Concrete.................................................................................................................... 6
Table 2: Material Properties 04 - Rebar......................................................................................................................... 6
Table 3: Material Properties 05 - Tendon....................................................................................................................... 6
Table 4: Slab Properties 02 - Solid Slabs, Part 1 of 2........................................... Error: Reference source not found
Table 4: Slab Properties 02 - Solid Slabs, Part 2 of 2........................................... Error: Reference source not found
Table 5: Soil Properties................................................................................................................................................. 6
Table 6: Spring Properties - Point.................................................................................................................................. 7
Table 7: Spring Properties - Line................................................................................................................................... 7

Page 3 of 16
pile.fdb SAFE v12.3.2 - License #C85

5. Design summary 12 March 2014


Table 8: Slab Property Assignments.............................................................................................................................. 8
Table 9: Point Spring Assignments................................................................................................................................ 8
Table 10: Load Patterns................................................................................................................................................ 9
Table 11: Load Assignments - Point Loads, Part 1 of 2................................................................................................. 9
Table 11: Load Assignments - Point Loads, Part 2 of 2................................................................................................. 9
Table 12: Load Cases 02 - Static.................................................................................................................................. 9
Table 13: Load Cases 06 - Loads Applied..................................................................................................................... 9
Table 14: Load Combinations...................................................................................................................................... 10
Table 15: Soil Pressures - Summary........................................................................................................................... 10
Table 16: Nodal Reactions........................................................................................................................................... 11
Table 17: Sum Of Reactions, Part 1 of 2..................................................................................................................... 11
Table 17: Sum Of Reactions, Part 2 of 2..................................................................................................................... 12
Table 18: Nodal Displacements - Summary, Part 1 of 2.............................................................................................. 12
Table 18: Nodal Displacements - Summary, Part 2 of 2.............................................................................................. 13
Table 19: Design Preferences 01 - Resistance Factors.............................................................................................. 14
Table 20: Design Preferences 02 - Rebar Cover - Slabs............................................................................................. 14
Table 21: Design Preferences 03 - Rebar Cover - Beams.......................................................................................... 14
Table 22: Design Preferences 04 - Prestress Data..................................................................................................... 14
Table 23: Slab Design Overwrites 02 - Finite Element Based, Part 1 of 2................................................................... 15
Table 23: Slab Design Overwrites 02 - Finite Element Based, Part 2 of 2................................................................... 15
Table 24: Punching Shear Design Overwrites 01 - General........................................................................................ 15

Page 4 of 16
pile.fdb SAFE v12.3.2 - License #C85

5. Design summary 12 March 2014

Model Definition

Page 5 of 16
pile.fdb SAFE v12.3.2 - License #C85

5. Design summary 12 March 2014

1. Model properties
This section provides model properties, including items such as material properties, section properties, and support
properties.

1.1. Material properties

Table 1: Material Properties 03 - Concrete


Table 1: Material Properties 03 - Concrete
Material E U A UnitWt Fc LtWtConc
N/mm2 1/C kN/m3 N/mm2
C40 28000.00000 0.200000 9.9000E-06 2.3563E+01 40.00000 No

Table 2: Material Properties 04 - Rebar


Table 2: Material Properties 04 - Rebar
Material E UnitWt Fy Fu
N/mm2 kN/m3 N/mm2 N/mm2
Fy460 200000 7.6973E+01 400.00000 500.00000

Table 3: Material Properties 05 - Tendon


Table 3: Material Properties 05 - Tendon
Material E UnitWt Fy Fu
N/mm2 kN/m3 N/mm2 N/mm2
A416MGr186 196501 7.6973E+01 1690.00000 1860.00000

1.2. Section properties

Table 4: Slab Properties 02 - Solid Slabs


Table 4: Slab Properties 02 - Solid Slabs
Slab Type MatProp Thickness Ortho
mm
SLAB1 Slab C40 400.000 No

1.3. Support properties

Table 5: Soil Properties


Table 5: Soil Properties
Soil Subgrade
kN/m3

Page 6 of 16
pile.fdb SAFE v12.3.2 - License #C85

5. Design summary 12 March 2014


SOIL1 2.0000E+04

Table 6: Spring Properties - Point


Table 6: Spring Properties - Point
Spring Ux Uy Uz Rx Ry Rz NonlinOpt
kN/mm kN/mm kN/mm kN-mm/rad kN-mm/rad kN-mm/rad
PSPR1 0.00000 0.00000 1.000E-05 0.00 0.00 0.00 None
(Linear)

Table 7: Spring Properties - Line


Table 7: Spring Properties - Line
Spring VertStiff RotStiff NonlinOpt
kN/mm/mm kN/rad
LSPR1 0.001000 1.000E-03 None
(Linear)

Page 7 of 16
pile.fdb SAFE v12.3.2 - License #C85

5. Design summary 12 March 2014

2. Model assignments
This section provides model assignments, including assignments to slabs, beams, and joints.

2.1. Slab assignments

Table 8: Slab Property Assignments


Table 8: Slab Property
Assignments
Area SlabProp

1 SLAB1

2.2. Support assignments

Table 9: Point Spring Assignments


Table 9: Point Spring Assignments
Point Spring

11 PSPR1
12 PSPR1
13 PSPR1
14 PSPR1
17 PSPR1
18 PSPR1
19 PSPR1
20 PSPR1
23 PSPR1
24 PSPR1
25 PSPR1
26 PSPR1

Page 8 of 16
pile.fdb SAFE v12.3.2 - License #C85

5. Design summary 12 March 2014

3. Model loading
This section provides model loading information, including load patterns, load cases, and load combinations.

3.1. Load patterns

Table 10: Load Patterns


Table 10: Load Patterns
LoadPat Type SelfWtMult

DEAD DEAD 0.000000


LIVE LIVE 0.000000

Table 11: Load Assignments - Point Loads, Part 1 of 2


Table 11: Load Assignments - Point Loads, Part 1 of 2
Point LoadPat Fx Fy Fgrav
kN kN kN
39 DEAD 0.000 0.000 2600.000

Table 11: Load Assignments - Point Loads, Part 2 of 2


Table 11: Load Assignments - Point Loads, Part 2 of 2
Point Mx My Mz XDim YDim
kN-m kN-m kN-m mm mm
39 0.0000 0.0000 0.0000 0.000 0.000

3.2. Load cases

Table 12: Load Cases 02 - Static


Table 12: Load Cases 02 - Static
LoadCase InitialCond AType

DEAD Zero Linear


LIVE Zero Linear

Table 13: Load Cases 06 - Loads Applied


Table 13: Load Cases 06 - Loads Applied
LoadCase LoadPat SF

DEAD DEAD 1.000000


LIVE LIVE 1.000000

Page 9 of 16
pile.fdb SAFE v12.3.2 - License #C85

5. Design summary 12 March 2014

3.3. Load combinations

Table 14: Load Combinations


Table 14: Load Combinations
Combo Load SF Type DSStrength DSServInit DSServNorm DSServLong

DCONU1 DEAD 1.40000 Linear Add Yes No No No


0
DCONU2 DEAD 1.20000 Linear Add Yes No No No
0
DCONU2 LIVE 1.60000
0

4. Analysis results
4.1. Support results
This section provides support results, including items such as column, support, and spring reactions, .

Table 15: Soil Pressures - Summary


Table 15: Soil Pressures - Summary
Panel OutputCase MaxPress MinPress GlobalXMax GlobalYMax GlobalXMin GlobalYMin
N/mm2 N/mm2 m m m m
1 DEAD 0.000000 0.000000 0.00000 0.90000 0.00000 0.90000
2 DEAD 0.000000 0.000000 0.00000 1.80000 0.00000 1.80000
3 DEAD 0.000000 0.000000 0.00000 2.70000 0.00000 2.70000
4 DEAD 0.000000 0.000000 0.00000 3.60000 0.00000 3.60000
5 DEAD 0.000000 0.000000 0.00000 4.50000 0.00000 4.50000
6 DEAD 0.000000 0.000000 0.90000 0.90000 0.90000 0.90000
7 DEAD 0.000000 0.000000 0.90000 1.80000 0.90000 1.80000
8 DEAD 0.000000 0.000000 0.90000 2.70000 0.90000 2.70000
9 DEAD 0.000000 0.000000 0.90000 3.60000 0.90000 3.60000
10 DEAD 0.000000 0.000000 0.90000 4.50000 0.90000 4.50000
11 DEAD 0.000000 0.000000 1.80000 0.90000 1.80000 0.90000
12 DEAD 0.000000 0.000000 1.80000 1.80000 1.80000 1.80000
13 DEAD 0.000000 0.000000 1.80000 2.70000 1.80000 2.70000
14 DEAD 0.000000 0.000000 1.80000 3.60000 1.80000 3.60000
15 DEAD 0.000000 0.000000 1.80000 4.50000 1.80000 4.50000
16 DEAD 0.000000 0.000000 2.70000 0.90000 2.70000 0.90000
17 DEAD 0.000000 0.000000 2.70000 1.80000 2.70000 1.80000
18 DEAD 0.000000 0.000000 2.70000 2.70000 2.70000 2.70000
19 DEAD 0.000000 0.000000 2.70000 3.60000 2.70000 3.60000
20 DEAD 0.000000 0.000000 2.70000 4.50000 2.70000 4.50000
1 LIVE 0.000000 0.000000 0.00000 0.90000 0.00000 0.90000
2 LIVE 0.000000 0.000000 0.00000 1.80000 0.00000 1.80000
3 LIVE 0.000000 0.000000 0.00000 2.70000 0.00000 2.70000
4 LIVE 0.000000 0.000000 0.00000 3.60000 0.00000 3.60000
5 LIVE 0.000000 0.000000 0.00000 4.50000 0.00000 4.50000
6 LIVE 0.000000 0.000000 0.90000 0.90000 0.90000 0.90000

Page 10 of 16
pile.fdb SAFE v12.3.2 - License #C85

5. Design summary 12 March 2014


7 LIVE 0.000000 0.000000 0.90000 1.80000 0.90000 1.80000
8 LIVE 0.000000 0.000000 0.90000 2.70000 0.90000 2.70000
9 LIVE 0.000000 0.000000 0.90000 3.60000 0.90000 3.60000
10 LIVE 0.000000 0.000000 0.90000 4.50000 0.90000 4.50000
11 LIVE 0.000000 0.000000 1.80000 0.90000 1.80000 0.90000
12 LIVE 0.000000 0.000000 1.80000 1.80000 1.80000 1.80000
13 LIVE 0.000000 0.000000 1.80000 2.70000 1.80000 2.70000
14 LIVE 0.000000 0.000000 1.80000 3.60000 1.80000 3.60000
15 LIVE 0.000000 0.000000 1.80000 4.50000 1.80000 4.50000
16 LIVE 0.000000 0.000000 2.70000 0.90000 2.70000 0.90000
17 LIVE 0.000000 0.000000 2.70000 1.80000 2.70000 1.80000
18 LIVE 0.000000 0.000000 2.70000 2.70000 2.70000 2.70000
19 LIVE 0.000000 0.000000 2.70000 3.60000 2.70000 3.60000
20 LIVE 0.000000 0.000000 2.70000 4.50000 2.70000 4.50000

Table 16: Nodal Reactions


Table 16: Nodal Reactions
Point OutputCase Fx Fy Fz Mx My Mz
kN kN kN kN-m kN-m kN-m
11 DEAD 0.000 0.000 220.279 0.0000 0.0000 0.0000
12 DEAD 0.000 0.000 181.761 0.0000 0.0000 0.0000
13 DEAD 0.000 0.000 143.243 0.0000 0.0000 0.0000
14 DEAD 0.000 0.000 104.725 0.0000 0.0000 0.0000
17 DEAD 0.000 0.000 274.444 0.0000 0.0000 0.0000
18 DEAD 0.000 0.000 235.926 0.0000 0.0000 0.0000
19 DEAD 0.000 0.000 197.408 0.0000 0.0000 0.0000
20 DEAD 0.000 0.000 158.890 0.0000 0.0000 0.0000
23 DEAD 0.000 0.000 328.608 0.0000 0.0000 0.0000
24 DEAD 0.000 0.000 290.090 0.0000 0.0000 0.0000
25 DEAD 0.000 0.000 251.572 0.0000 0.0000 0.0000
26 DEAD 0.000 0.000 213.054 0.0000 0.0000 0.0000
11 LIVE 0.000 0.000 0.000 0.0000 0.0000 0.0000
12 LIVE 0.000 0.000 0.000 0.0000 0.0000 0.0000
13 LIVE 0.000 0.000 0.000 0.0000 0.0000 0.0000
14 LIVE 0.000 0.000 0.000 0.0000 0.0000 0.0000
17 LIVE 0.000 0.000 0.000 0.0000 0.0000 0.0000
18 LIVE 0.000 0.000 0.000 0.0000 0.0000 0.0000
19 LIVE 0.000 0.000 0.000 0.0000 0.0000 0.0000
20 LIVE 0.000 0.000 0.000 0.0000 0.0000 0.0000
23 LIVE 0.000 0.000 0.000 0.0000 0.0000 0.0000
24 LIVE 0.000 0.000 0.000 0.0000 0.0000 0.0000
25 LIVE 0.000 0.000 0.000 0.0000 0.0000 0.0000
26 LIVE 0.000 0.000 0.000 0.0000 0.0000 0.0000

4.2. Structure results


Table 17: Sum Of Reactions, Part 1 of 2
Table 17: Sum Of Reactions, Part 1 of 2
OutputCase GlobalFX GlobalFY GlobalFZ GlobalMX GlobalMY GlobalMZ
kN kN kN kN-m kN-m kN-m
DEAD 0.000 0.000 2600.001 5330.0089 -5069.9861 0.0000

Page 11 of 16
pile.fdb SAFE v12.3.2 - License #C85

5. Design summary 12 March 2014


LIVE 0.000 0.000 0.000 0.0000 0.0000 0.0000

Table 17: Sum Of Reactions, Part 2 of 2


Table 17: Sum Of Reactions, Part 2 of 2
OutputCase GlobalX GlobalY GlobalZ
m m m
DEAD 0.00000 0.00000 0.00000
LIVE 0.00000 0.00000 0.00000

Table 18: Nodal Displacements - Summary, Part 1 of 2


Table 18: Nodal Displacements - Summary, Part 1 of 2
Panel Node OutputCase Ux Uy Uz Rx Ry Rz
mm mm mm Radians Radians Radians
1 ~17 DEAD 0.000000 0.000000 -25879700 0.000000 0.000000 0.000000
2 11 DEAD 0.000000 0.000000 -22027905 0.000000 0.000000 0.000000
3 12 DEAD 0.000000 0.000000 -18176110 0.000000 0.000000 0.000000
4 13 DEAD 0.000000 0.000000 -14324314 0.000000 0.000000 0.000000
5 14 DEAD 0.000000 0.000000 -10472518 0.000000 0.000000 0.000000
6 ~18 DEAD 0.000000 0.000000 -31296160 0.000000 0.000000 0.000000
7 17 DEAD 0.000000 0.000000 -27444365 0.000000 0.000000 0.000000
8 18 DEAD 0.000000 0.000000 -23592570 0.000000 0.000000 0.000000
9 19 DEAD 0.000000 0.000000 -19740774 0.000000 0.000000 0.000000
10 20 DEAD 0.000000 0.000000 -15888978 0.000000 0.000000 0.000000
11 ~19 DEAD 0.000000 0.000000 -36712619 0.000000 0.000000 0.000000
12 23 DEAD 0.000000 0.000000 -32860824 0.000000 0.000000 0.000000
13 24 DEAD 0.000000 0.000000 -29009029 0.000000 0.000000 0.000000
14 25 DEAD 0.000000 0.000000 -25157233 0.000000 0.000000 0.000000
15 26 DEAD 0.000000 0.000000 -21305437 0.000000 0.000000 0.000000
16 3 DEAD 0.000000 0.000000 -42129078 0.000000 0.000000 0.000000
17 ~21 DEAD 0.000000 0.000000 -38277283 0.000000 0.000000 0.000000
18 ~23 DEAD 0.000000 0.000000 -34425488 0.000000 0.000000 0.000000
19 ~25 DEAD 0.000000 0.000000 -30573692 0.000000 0.000000 0.000000
20 ~27 DEAD 0.000000 0.000000 -26721896 0.000000 0.000000 0.000000
21 3 DEAD 0.000000 0.000000 -42129078 0.000000 0.000000 0.000000
22 ~21 DEAD 0.000000 0.000000 -38277283 0.000000 0.000000 0.000000
23 ~23 DEAD 0.000000 0.000000 -34425488 0.000000 0.000000 0.000000
24 ~25 DEAD 0.000000 0.000000 -30573692 0.000000 0.000000 0.000000
25 ~27 DEAD 0.000000 0.000000 -26721896 0.000000 0.000000 0.000000
1 4 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2 11 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
3 12 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
4 13 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
5 1 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
6 11 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
7 11 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
8 12 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
9 13 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
10 14 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
11 17 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
12 17 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
13 18 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
14 19 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000

Page 12 of 16
pile.fdb SAFE v12.3.2 - License #C85

5. Design summary 12 March 2014


15 20 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
16 3 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
17 23 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
18 24 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
19 25 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
20 2 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
21 3 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
22 ~21 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
23 ~23 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
24 ~25 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
25 2 LIVE 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000

Table 18: Nodal Displacements - Summary, Part 2 of 2


Table 18: Nodal Displacements - Summary, Part 2 of 2
Panel Node OutputCase GlobalX GlobalY
m m
1 ~17 DEAD 0.90000 0.00000
2 11 DEAD 0.90000 0.90000
3 12 DEAD 0.90000 1.80000
4 13 DEAD 0.90000 2.70000
5 14 DEAD 0.90000 3.60000
6 ~18 DEAD 1.80000 0.00000
7 17 DEAD 1.80000 0.90000
8 18 DEAD 1.80000 1.80000
9 19 DEAD 1.80000 2.70000
10 20 DEAD 1.80000 3.60000
11 ~19 DEAD 2.70000 0.00000
12 23 DEAD 2.70000 0.90000
13 24 DEAD 2.70000 1.80000
14 25 DEAD 2.70000 2.70000
15 26 DEAD 2.70000 3.60000
16 3 DEAD 3.60000 0.00000
17 ~21 DEAD 3.60000 0.90000
18 ~23 DEAD 3.60000 1.80000
19 ~25 DEAD 3.60000 2.70000
20 ~27 DEAD 3.60000 3.60000
21 3 DEAD 3.60000 0.00000
22 ~21 DEAD 3.60000 0.90000
23 ~23 DEAD 3.60000 1.80000
24 ~25 DEAD 3.60000 2.70000
25 ~27 DEAD 3.60000 3.60000
1 4 LIVE 0.00000 0.00000
2 11 LIVE 0.90000 0.90000
3 12 LIVE 0.90000 1.80000
4 13 LIVE 0.90000 2.70000
5 1 LIVE 0.00000 4.50000
6 11 LIVE 0.90000 0.90000
7 11 LIVE 0.90000 0.90000
8 12 LIVE 0.90000 1.80000
9 13 LIVE 0.90000 2.70000
10 14 LIVE 0.90000 3.60000
11 17 LIVE 1.80000 0.90000
12 17 LIVE 1.80000 0.90000
13 18 LIVE 1.80000 1.80000
14 19 LIVE 1.80000 2.70000

Page 13 of 16
pile.fdb SAFE v12.3.2 - License #C85

5. Design summary 12 March 2014


15 20 LIVE 1.80000 3.60000
16 3 LIVE 3.60000 0.00000
17 23 LIVE 2.70000 0.90000
18 24 LIVE 2.70000 1.80000
19 25 LIVE 2.70000 2.70000
20 2 LIVE 3.60000 4.50000
21 3 LIVE 3.60000 0.00000
22 ~21 LIVE 3.60000 0.90000
23 ~23 LIVE 3.60000 1.80000
24 ~25 LIVE 3.60000 2.70000
25 2 LIVE 3.60000 4.50000

5. Design summary
This section provides design information for beams, strips, and punching checks.

5.1. Preferences
Table 19: Design Preferences 01 - Resistance Factors
Table 19: Design Preferences 01 -
Resistance Factors
PhiTen PhiComp PhiShear

0.900000 0.650000 0.750000

Table 20: Design Preferences 02 - Rebar Cover - Slabs


Table 20: Design Preferences 02 - Rebar Cover - Slabs
CoverTop CoverBot BarSize InnerLayer PTCGSTop PTCGSBotE PTCGSBotI SlabType
xt nt
mm mm mm mm mm
15.000 15.000 18 B 25.000 40.000 25.000 Two Way

Table 21: Design Preferences 03 - Rebar Cover - Beams


Table 21: Design Preferences 03 - Rebar Cover - Beams
CoverTop CoverBot BarSizeF BarSizeS PTCGSTop PTCGSBot
mm mm mm mm
40.000 40.000 28 12 50.000 50.000

Table 22: Design Preferences 04 - Prestress Data


Table 22: Design Preferences 04 - Prestress Data
InitConcRat InitTopTen InitBotTen InitExComp FinTopTen FinBotTen FinExComp SusExComp LLFraction

0.800000 3.000000 3.000000 0.600000 6.000000 6.000000 0.600000 0.450000 0.500000

Page 14 of 16
pile.fdb SAFE v12.3.2 - License #C85

5. Design summary 12 March 2014

5.2. Overwrites
Table 23: Slab Design Overwrites 02 - Finite Element Based, Part 1 of 2
Table 23: Slab Design Overwrites 02 - Finite Element
Based, Part 1 of 2
Area RebarMat

1 Fy460

Table 23: Slab Design Overwrites 02 - Finite Element Based, Part 2 of 2


Table 23: Slab Design Overwrites 02 - Finite Element Based,
Part 2 of 2
Area RLLF Design IgnorePT

1 1.000000 Yes No

Table 24: Punching Shear Design Overwrites 01 - General


Table 24: Punching Shear Design Overwrites 01 - General
Point Check LocType EffDepth ReinfType

11 Program Auto Auto None


Determined
12 Program Auto Auto None
Determined
13 Program Auto Auto None
Determined
14 Program Auto Auto None
Determined
17 Program Auto Auto None
Determined
18 Program Auto Auto None
Determined
19 Program Auto Auto None
Determined
20 Program Auto Auto None
Determined
23 Program Auto Auto None
Determined
24 Program Auto Auto None
Determined
25 Program Auto Auto None
Determined
26 Program Auto Auto None
Determined

5.3. Slab design

Page 15 of 16
pile.fdb SAFE v12.3.2 - License #C85

5. Design summary 12 March 2014


5.4. Beam design

5.5. Punching check/design

Page 16 of 16

You might also like