Scribd
Upload
113 views3 pages

PROCEDE FREEFORM ARBURG (AKF) en

The AKF process from Arburg is an additive manufacturing technique that uses a nozzle to project liquid plastic microbeads onto a substrate to build a part layer-by-layer without a mold. Arburg's expertise in plastic injection molding informed the design of the material preparation and nozzle deposition. The process offers two configurations - a classic cross table with a z-axis or a more original 5-axis positioning system. It was recently introduced in 2013, so feedback is not yet available, but it promises to produce plastic parts using conventional injection molding materials.

Uploaded by

Soufiane
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
113 views3 pages

PROCEDE FREEFORM ARBURG (AKF) en

The AKF process from Arburg is an additive manufacturing technique that uses a nozzle to project liquid plastic microbeads onto a substrate to build a part layer-by-layer without a mold. Arburg's expertise in plastic injection molding informed the design of the material preparation and nozzle deposition. The process offers two configurations - a classic cross table with a z-axis or a more original 5-axis positioning system. It was recently introduced in 2013, so feedback is not yet available, but it promises to produce plastic parts using conventional injection molding materials.

Uploaded by

Soufiane
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Subscribe to DeepL Pro to edit this document.

IUT of Limousin Visit www.DeepL.com/Pro for more information. 2013-2014

VI -5 -PROCEDEDE FREEFORM ARBURG (AKF)


It is a process dedicated to additive manufacturing and comes from one of the leaders in injection
presses for the plastics industry. It simply aims at freeing the mold to execute a plastic part. The shape is
no longer linked to the impression but to the addition of plastic micro beads projected in liquid phase on
a support.

The AKF process cannot deny a close relationship with plastic injection
moulding.

Bubble deposit of liquid plastic - beginning of the Production progress


cycle
Arburg has used its know-how for the design of injection moulding machines, in particular for the
preparation of the material prior to injection. The plastic is heated to the liquid or glass transition phase
in a pressure nozzle. The orifice control produces a drop of plastic which is projected onto the substrate
and then onto the previously cooled and thus hardened bubbles. Arburg considers several
configurations, one classic with a cross table and a displacement axis along the lamination axis. The
second is more original because it uses a 5-axis device which offers great freedom of realization.

Y.Pauliat Additive 36
manufacturing
IUT of Limousin 2013-2014
Detail of a projection nozzle Positioning with 5 axes under the nozzle

Y.Pauliat Additive 37
manufacturing
IUT of Limousin 2013-2014
The process was presented in the second half of 2013, it is too early to get feedback on the use or
real potential of this technology. Nevertheless, it presents an important breakthrough for plastic parts
made of good materials, as this process is designed to use the same materials as plastic injection.
Example of parts made

Y.Pauliat Additive 38
manufacturing

You might also like