MOTOTRBO ™

SLR 8000
BASE STATION / REPEATER

For better safety and efficiency throughout your organization, you need reliable voice and data
communications that connect everyone and everything. The MOTOTRBO SLR 8000 repeater
delivers high performance, high reliability two-way radio service, optimised for your workplace.
The SLR 8000 is engineered for high performance, reliability and Whether you need the simplicity of a single site conventional system,
flexibility and represents the next generation in repeaters. the coverage of IP Site Connect, or the powerful trunking capabilities of
Capacity Plus, Capacity Max or Connect Plus, the SLR 8000 delivers the
Versatile and powerful, MOTOTRBO combines the best of two-way power of digital two-way radio to your workforce. It can also operate
radio functionality with the latest digital technology. It integrates voice as an analogue repeater (conventional or MPT 1327), or as a mixed
and data seamlessly, offers advanced features that are easy to use and mode analogue/digital repeater while you transition away from a
delivers increased capacity to meet your communication needs from legacy analogue system.
the field to the factory floor.

DATA SHEET | SLR 8000 BASE STATION / REPEATER

 GENERAL SPECIFICATIONS
VHF UHF BAND 1
Frequency Range 136-174 MHz 400-470 MHz
Channel Spacing 12.5 / 20 / 25 kHz
Channel Step Size 5 Hz
Frequency Stability 0.5 ppm
Channel Capacity 64
RF Output Power 1-100 W
Dimensions (H x W x D) 89 x 483 x 438 mm (3.5 x 19 x 17.25 in)
Weight 14.1 kg (31 lbs)
Input Voltage (AC) 100-240 Vac, 47-63 Hz
Current (standby), 110 / 240 V 0.25 / 0.3 A
Current (transmitting at 100 W), 110 / 240 V 2.1 / 1.1 A (typical) 2.0 / 1.1 A (typical)
Input Voltage (DC) 12 V (11.0-15.5 V) / 24 V (21.6-32.0 V)
Current (standby), 24 V 0.5 A
Current (transmitting at 100 W), 24 V 8.6 A (typical) 8.2 A (typical)
Input Power Modes AC only, DC only, AC with Battery Revert
Operating Temperature Range -30 to +60 °C (-22 to +140 °F)
Humidity RH of 95%, Non-condensing at 50 °C (122 °F)
Max Duty Cycle 100%
Digital Vocoder Type AMBE+2™
Battery Charger Capacity (12 / 24 V) 5A
Connectivity, front panel USB B Receptacle, Microphone (RJ45), Speaker (integrated)
Connectivity, rear panel Tx (N female), Rx (BNC female), USB A Receptacle, 2x Ethernet, DB25 Accessory Connector,
External Reference (BNC Female)
External Reference 5 / 10 MHz (Auto-detect)
Supported System Types Digital Conventional, IP Site Connect, Capacity Plus, Capacity Max, Connect Plus Analogue
Conventional, Analogue Conventional Voting, MPT 1327
Audio Types Input: Balanced (600 ohms and Country-specific Impedances), Unbalanced (1000 ohms),
Microphone Accessory Port. Output: Balanced (600 ohms and Country-specific Impedances),
Unbalanced (600 ohms), Integrated Speaker.
Audio Levels Input: Balanced: +10 to -30 dBm, Unbalanced: Adjustable, 80 mV rms nominal for 60% RSD.
Output: Balanced: +7 to -30 dBm, Unbalanced: Adjustable, 330 mV rms nominal @ 60% RSD.
FCC Emission Designators 11K0F3E, 16K0F3E, 7K60FXD, 7K60F7D, 7K60FXE, 7K60F7E, 7K60F7W
FCC Type Acceptance ABZ99FT3095 ABZ99FT4098
IC Description 109AB-99FT3095 109AB-99FT4098

DATA SHEET | SLR 8000 BASE STATION / REPEATER

 RECEIVER PRODUCT MEETS
VHF UHF • ETSI 300-086
Frequency Range 136-174 MHz 400-470 MHz • ETSI 300-113
Sensitivity, 12dB SINAD 0.3 uV (0.22 uV typical)
• TIA/EID603D
Sensitivity, 5% BER 0.25 uV (0.18 uV typical)
Selectivity (TIA603D), 25 / 20 / 12.5 kHz 83 / 83 / 52 dB 78 / 78 / 52 dB • CE Marked
Selectivity (TIA603), 25 / 20 / 12.5 kHz 83 / 83 / 75 dB 80 / 80 / 75 dB • RoHS2-Compliant
Intermodulation Rejection (TIA603D/ETSI) 85 / 73 dB (87 / 78 dB typical)
Spurious Rejection (TIA603D/ETSI) 85 / 75 dB (95 / 90 dB typical)
• UL Listed
Audio Distortion < 3% (<1.5% typical) • Digital Protocol ETSI
Hum and Noise, 25 / 20 / 12.5 kHz -50 / -50 / -45 dB (-56 / -56 / -52 dB typical) TS 102 361-1, -2, -3, -4
Blocking 110 dB (113 dB typical) (DMR Tier II and III)
TRANSMITTER
VHF UHF
Frequency Range 136-174 MHz 136-174 MHz
RF Output Power DC (24 V) or AC 1-100 W
DC (12 V) 1-50 W
Max Duty Cycle 55 dB
Intermodulation Attenuation 5W 4W
Adjacent Channel Power (TIA603D), 75 / 75 / 60 dB
25 / 20 / 12.5 kHz
Adjacent Channel Power (ETSI), 25 / 20 / 12.5 kHz -40 dB @ 12.5 kHz / -45 dB @ 25 kHz
Conducted Spurious Emissions 75 / 75 / 60 dB (78 / 78 / 62 dB typical)
Adjacent Channel Power 40 dBm < 1 GHz, -30 dBm > 1 GHz
Audio Response TIA603D
Audio Distortion < 3% (<1% typical)
Hum and Noise, 25 / 20 / 12.5 kHz -50 / -50 / -45 dB (-55 / -55 / -52 dB typical)
Rated System Deviation, 25 / 20 / 12.5 kHz ±5.0 / ±5.0 / ±2.5 kHz

NOTES
Availability is subject to individual country law and regulations.
All specifications shown are typical unless otherwise stated and are subject to change without notice.
Specifications are for unit excluding options, unless otherwise stated.

**Images show product equipped with optional modules

DATA SHEET | SLR 8000 BASE STATION / REPEATER

NEXT GENERATION The unit has internal monitoring circuitry, allowing
you to measure parameters such as input voltage
MOTOTRBO REPEATER and current, output power, module temperatures
The SLR 8000 represents a huge leap forward in
and VSWR. This can be accessed through the front
design and technology. Based on a wealth of field
panel maintenance interface, or through a remote
experience, customer feedback and technological
management application such as RDAC.
innovation, the product delivers outstanding
performance and reliability for your business two-way The standard warranty is 2 years, and can be enhanced
radio system. From an efficient modular design to with Service from the Start: a full service support
flexible installation options, the SLR 8000 is truly the program that protects your hardware investment with
next generation in repeaters. prioritised expert repair, proactive technical support,
software updates and more.
HIGH PERFORMANCE
With its 100 W transmitter output and high sensitivity TOTAL FLEXIBILITY
receiver, the SLR 8000 delivers radio coverage to The SLR 8000 can be customised to suit your operation.
an enormous area. With its excellent performance There are options for an internal preselector and
characteristics, it is also ideally suited for congested antenna relay module, offering you a true one-box
sites, where tighter specifications are required. installation. You can also opt for an internal wireline
card if you need tone control capabilities, 4wire audio
The SLR 8000 supports the full MOTOTRBO feature
and additional external inputs.
set, and is compatible with all the MOTOTRBO
system architectures: single site conventional, IP Site Power can be supplied as 110-240 Vac, 12-24 Vdc, or
Connect, Capacity Plus, Capacity Max and Connect AC with battery fallback: there is even a built-in 5 A
Plus. The IP interface allows you to build applications battery charger. The 2U unit can be mounted efficiently
and consoles directly into your system. in a rack, with no requirement for ventilation space
above or below. And serviceability is improved by the local
To help you build your system for top performance,
voice capability: there is an internal speaker and volume
MOTOTRBO RF Planning and IP Integration Services
control, with provision for an external microphone.
are available for purchase.
MOTOTRBO SLR 8000
HIGH RELIABILITY With excellent performance, high reliability and a
The SLR 8000 offers round-the-clock reliable flexible design in a slim and efficient unit, the SLR 8000
operation, even at its continuous full transmit power repeater is at the heart of a top-quality MOTOTRBO
of 100W. The high-quality design has been validated professional two-way radio system.
through Motorola’s Accelerated Life Testing (ALT)
program, and meets stringent quality criteria. The
product has a next-generation receiver design, with
high sensitivity and improved noise blocking, so you
can be confident of clear voice quality, even in the
worst conditions.

For more information on how to make your business more efficient and
better connected, visit www.motorolasolutions.com/MOTOTRBO

Motorola Solutions Ltd. Nova South, 160 Victoria Street, London, SW1E 5LB, United Kingdom.

Availability is subject to individual country law and regulations. All specifications shown are typical unless otherwise stated and are subject to change without notice.

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license.
All other trademarks are the property of their respective owners. © 2020 Motorola Solutions, Inc. All rights reserved. (08-20)