CP2: 2108/2108H 2108 Part Number 87610340: Functions
CP2: 2108/2108H 2108 Part Number 87610340: Functions
com
Type Description
87 610 340 2108 Impulse counter
Functions
Solid state input
Display 8 digits LCD (2108)
6 digits LCD (2108H)
Height of digits 7 mm
Counting capacity 0 to 99 999 999 (2108)
Time ranges (2108H) :
0 →99 999,9 h
0 →99 999,9 min
0 →99 999,9 s
0 →99 h 59 min 59 s
Time base Quartz (precision ± 50 ppm)
Possibility of reloading current value (2108H)
Volt-free contact
Slow counting input (In.L) 40 Hz
TOFF: 12 ms min
TON: 12 ms min
Current output: 52 μA max
Leakage current in OFF state 0.2 μA max
Residual voltage: 0.4 V max
Volt-free contact or transistor
NPN open collector
High-speed input (In.H) 7 kHz max
TOFF: 70 μs min
TON: 70 μs min
Level 0: 0 to 1 VDC
Level 1: 4 to 30 VDC
Current consumption: 6 mA max at 24 VDC
Reset to zero Volt-free contact or transistor
NPN open collector:
12 ms min (2108)
100 ms min (2108)
Reset via Front panel
Radiated field IEC 1000-4-3, level 3, 10 V/ M
26 MHz to 1 GHz
fast transients IEC 1000-4-4, level 3, 1KV
Damped oscillatory wave IEC 255.4, level 3, 1 KV
Electrostatic discharge IEC 1000-4-2, level 3, 8 KV
Material
Connection by screw terminals at rear of casing 5 terminals
Connection capacity 2 x 1.5 mm2
Mounting By bracket
Degree of protection front face IP 66
Operating temperature range (°C) 0 →+55
Storage temperature range (°C) -25 →+70
Conformity to standards VDE 0110 - ICE 664 - ICE 348 -
ICE 255.4 - ICE 255.5 - ICE 801.2- ICE 801.4
Weight (g) 60
1 lithium battery - Life (years)
Accessories Code
Adaptor for cut-out Ø 50 (dimensions Ø 73 mm) 26 546 829
Adaptor for cut-out 45 x 45 mm (dimensions 52 x 52 mm) 26 546 830
23/03/2011
www.crouzet.com
Adaptor for cut-out 25 x 50 mm (dimensions 29 x 54 mm) 26 546 831
Dimension Diagram :
Dimension Diagram :
No Legend
1 Seal
2 Fixing bracket
: 2108
No Legend
1 Reset input
2 Enable reset
23/03/2011
www.crouzet.com
3 Slow counting
4 0V
5 High-speed counting
No Legend
1 High-speed counting input
2 Slow counting input and reset
3 Enable reset input
23/03/2011