Scribd
Upload
60 views3 pages

Gage R&R (ANOVA) Report For .21 - 0681 / - 0668 XD

This document presents the results of a gage R&R study to evaluate measurement variation for a gage measuring property .21 _0681 / _0668 XD. The study found that 15.45% of the variation is due to gage repeatability and 98.80% is due to natural variation between parts. The gage meets the process tolerance requirements with only 2.39% of the total variation attributed to the gage.

Uploaded by

AKIN KAYODE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
60 views3 pages

Gage R&R (ANOVA) Report For .21 - 0681 / - 0668 XD

This document presents the results of a gage R&R study to evaluate measurement variation for a gage measuring property .21 _0681 / _0668 XD. The study found that 15.45% of the variation is due to gage repeatability and 98.80% is due to natural variation between parts. The gage meets the process tolerance requirements with only 2.39% of the total variation attributed to the gage.

Uploaded by

AKIN KAYODE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Gage R&R (ANOVA) Report for .

21 _0681 / _0668 XD
Reported by:
Gage name: Tolerance:
Date of study: Misc:

Components of Variation .21 _0681 / _0668 XD by Part


% Contribution 0.068
300 % Study Var
% Tolerance
Percent

0.067
150

0.066
0 1 2 3 4 5 6 7 8 9 10
Gage R&R Repeat Reprod Part-to-Part
Part
R Chart by Operator
1 2 .21 _0681 / _0668 XD by Operator
UCL=0.0004852 0.068
Sample Range

0.0004

_
0.0002 R=0.0001885 0.067

0.0000 LCL=0
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
0.066
Part 1 2
Operator
Xbar Chart by Operator
0.068
1 2
Part * Operator Interaction
0.068
Sample Mean

Operator
1
__
UCL=0.067045
0.067 2
Average

X=0.066852
LCL=0.066659 0.067

0.066
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
0.066
Part 1 2 3 4 5 6 7 8 9 10
Part

Gage R&R Study - ANOVA Method


Two-Way ANOVA Table With Interaction
D
Source F SS MS F P

Part 9 0.0000278 0.0000031 222.02 0.000


7
Operator 1 0.0000000 0.0000000 0.553 0.476
Part * 9 0.0000001 0.0000000 1.137 0.361
Operator
Repeatability 40 0.0000005 0.0000000    
Total 59 0.0000285      
α to remove interaction term = 0.05
Two-Way ANOVA Table Without Interaction
D
Source F SS MS F P

Part 9 0.0000278 0.0000031 246.231 0.000


Operator 1 0.0000000 0.0000000 0.614 0.437
Repeatability 49 0.0000006 0.0000000    
Total 59 0.0000285      
Gage R&R
Variance Components
%Contribution
Source VarComp (of VarComp)

Total Gage R&R 0.0000000 2.39


  Repeatability 0.0000000 2.39
  0.0000000 0.00
Reproducibility
    Operator 0.0000000 0.00
Part-To-Part 0.0000005 97.61
Total Variation 0.0000005 100.00
Process tolerance = 0.0013
Gage Evaluation
%Study Va
Study Var r %Tolerance
Source StdDev (SD) (6 × SD) (%SV) (SV/Toler)

Total Gage R&R 0.0001121 0.0006724 15.45 51.72


  Repeatability 0.0001121 0.0006724 15.45 51.72
  0.0000000 0.0000000 0.00 0.00
Reproducibility
    Operator 0.0000000 0.0000000 0.00 0.00
Part-To-Part 0.0007165 0.0042989 98.80 330.68
Total Variation 0.0007252 0.0043511 100.00 334.70
Number of Distinct Categories = 9
Probabilities of Misclassification
Joint Probability
Description Probability

A randomly selected part is bad but accepted 0.029


A randomly selected part is good but 0.031
rejected
Conditional Probability
Description Probability

A part from a group of bad products is accepted 0.057


A part from a group of good products is 0.064
rejected
Gage R&R for .21 _0681 / _0668 XD

You might also like