Elastoseal®
High Grade Waterproofing Sealant 1 of 2
Product Description
Elastoseal is a single component, ready to
use elastomeric rubber sealant for superior
weatherproofing and sealing of most
construction joints. This material cures
rapidly to a tough, full bodied, waterproof
seal that maintains its joint movement
capability and adhesion.
Key Features
• Highly resistant to ultraviolet rays
• Highly resistant to weather and
temperature changes
• Cures to a paintable surface
• Works on wet roofs and other surfaces
that are not permanently submerged
underwater.
Applications Product Specifications / Typical
• Seals joints, gaps and holes on roofs, Properties / Physical Characteristics
gutters, flashings, downspouts and Table 1.
drainpipes. Physical Properties, Uncured State
• Seals and adhere PVC pipes and fixtures. Parameters Results
• Seals cracks and mating points of Color Gray
concrete and other construction materials Consistency Thixotropic Paste
needing a flexible seal. Extrudability Easy to Spread
• Seals perimeters, gaps and joints Tack Free time 4 - 8 mins
between metal, glass and concrete. Slump ≤4 mm
Specific Gravity 1.32 - 1.4
Application Procedure Solids 83 - 87%
Surface must be clean and free from oil,
grease and loose particles. Roughen or wire Table 2.
brush smooth or coated surfaces to ensure Physical Properties, Cured State
good adhesion. Parameters Results
Hardness, Shore A 27 points
Packaging
Available sizes in: Grab on GI
• 4 L Can - Dry Good
• 1 L Can - Damp Good
• 1/2 L Can Adhesive Strength Min.150 psi
• 1/4 L Can Tensile Strength 1.79 - 2.93
• 250 g Pisil Foil Pouch
Elongation Min. 300%
• 85 g Pisilito Foil Pouch
Cure thru time 14 - 16 days
Storage
Keep containers tightly closed after use. Shelf Life
Keep away from electrical and other ignition 24 months
resources
2 of 2
Health and Safety Precautions Limited Liability
Flammable, harmful or fatal if swallowed. Except where prohibited by law, Pioneer will
Harmful if inhaled. Use only with adequate not be liable for any loss or damage arising
ventilation. Use gloves. from the use or application of the Pioneer
product, whether direct, indirect, special,
KEEP OUT OF REACH OF CHILDREN. incidental or consequential, regardless of the
legal theory asserted, including warranty,
Warranty and Disclaimers contract, negligence or strict liability.
Unless an additional warranty is specifically
stated on the applicable product packaging
or product literature, Pioneer warrants that
each Pioneer product conforms with the
applicable Pioneer product specification at
the time of shipment, and when properly
used and maintained in accordance with
Pioneer’s current published Technical Data
Sheet (TDS), will serve the purpose for which
it is intended. The recommendations and
statements in Pioneer’s TDS are based on
good building practice but are not, by any
means, an exhaustive statement of all
relevant information. Pioneer shall not be
liable for the recommendations in its TDS
and the performance of the relevant Product.
Pioneer shall also not be liable for any
claims, damages or defects arising from, or
in any way attributable to poor workmanship,
incorrect design or detailing, use of the
Pioneer product in unsuitable conditions,
and force majeure.
Pioneer MAKES NO OTHER WARRANTIES,
CONDITIONS OR REPRESENTATIONS,
EXPRESS OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED
WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR ANY IMPLIED
WARRANTY OR CONDITION ARISING OUT
OF A COURSE OF DEALING, CUSTOMER
OR USAGE OF TRADE. If the Pioneer
product does not conform to this warranty,
then the sole and exclusive remedy is, at
Pioneer’s option, the replacement of the
Pioneer product or refund of the purchase
price.
TDS Pioneer - 022019 Version