DESIGN CRITERIA
Design of Floor Sheathing
Specification of Yakal (80% Stress Grade)
Fb = 24.5 Mpa
Fv = 2.49 Mpa
Relative Density = 0.76
Spacing of Joist = L/360
Distance between Beam=
Ratio to be used = b= d/4
Residential Live Load =1.97
length(s)
Quantity= x2
panel (w)
Sheathing Dimensions (m)
Slab
length (s) length(l) spacing(s) panel(t) panel(w) Quantity
S1 3 3 0.4 0.016 0.6 10
S2 3 3 0.4 0.016 0.6 10
S3 3 3 0.4 0.016 0.6 10
S4 3 3 0.4 0.016 0.6 10
S5 3 3 0.4 0.016 0.6 10
S6 3 3 0.4 0.016 0.6 10
S7 3 2 0.4 0.016 0.6 10
Design of Floor Joist
Procedure
Part 1. Solving for Total Weight to be carried by Joists
a. Get the Total Weight due to Floor Sheathing
b. Calculate the Area of Openings of Walls within the Floor Joists
c. Choose the Stud Dimensions from NSCP Table 6.23.
d. Get the Total Weight due to Wall Studs within the Floor Joists considering Area of Openings
e. Get the Total Weight due to Walls within the Floor Joists considering Area of Openings
f. Sum up all the Weights.
Part 2. Design the Dimensions of the Floor Joists
a. Assume the width (b) of the floor joist.
b. Get the maximum shear and maximum moment due to the total weight.
c. Solve for the depth (d) using the allowable bending stress, shearing stress, and deflection.
d. Get the maximum d among the three.
Part 3
a. Solve for stress adjustments.
b. Solve for the new Weight of the building (include the self-weight of the joist already).
c. Investigate whether the dimensions will be safe due to the allowable bending stress, shearing
stress, and deflection.
Weight due to panels
ϒ (kN/m3) E Mpa WDL kPa WLL kPa W (kN/m)
S-1 7.4556 9780 0.5964 1.9 0.99857
S-2 7.4556 9780 0.5964 1.9 0.99857
S-3 7.4556 9780 0.5964 1.9 0.99857
S-4 7.4556 9780 0.5964 1.9 0.99857
S-5 7.4556 9780 0.5964 1.9 0.99857
S-6 7.4556 9780 0.5964 1.9 0.99857
S-7 7.4556 9780 0.5964 1.9 0.99857
ϒ ( panel(t))(quantity )
W DL =
2
W =(W ¿ ¿ DL +W ¿ ) ¿ ¿)
Weight due to Wall Studs
L (wall) s d
h (m) b (m) ϒ (kN/m3) quantity (pcs) W (kN/m)
m (m) (m)
S-1 3 2.8 0.6 0.05 0.1 7.4556 6 0.20875
S-2 0 2.8 0.6 0.05 0.1 7.4556 0 0
S-3 3 2.8 0.6 0.05 0.1 7.4556 6 0.20875
S-4 6 2.8 0.6 0.05 0.1 7.4556 11 0.19136
S-5 0 2.8 0.6 0.05 0.1 7.4556 0 0
S-6 3 2.8 0.6 0.05 0.1 7.4556 6 0.20875
S-7 3 2.8 0.6 0.05 0.1 7.4556 6 0.20875
Some have zero weights because those floor areas do not contain interior walls.
*Values of b, d, and s came from NSCP Table 6.23.
ϒ ( bdh)(quantity )
W=
length
quantity =L/s
Weight due to Walls (Bayok was used)
h (m) t (m) ρ (kg/m3) ϒ (kN/m3) W (kN/m)
S-1 2.8 0.02 0.44 4.3164 0.2417184
S-2 2.8 0.02 0.44 4.3164 0.2417184
S-3 2.8 0.02 0.44 4.3164 0.2417184
S-4 2.8 0.02 0.44 4.3164 0.2417184
S-5 2.8 0.02 0.44 4.3164 0.2417184
S-6 2.8 0.02 0.44 4.3164 0.2417184
S-7 2.8 0.02 0.44 4.3164 0.2417184
*The value of t is assumed (.01 x 2 as it is side by side)
L Wt ∆ allowable d d' b
S1 3 8.333 173.20 175 50
1.449038 9
S2 1.830 5.0833 114.99 125 50
1.240288 5
S3 3 8.333 173.20 175 50
1.449038 9
S4 3 1.431648 8.333 172.68 175 50
S5 3 1.240288 8.333 166.60 175 50
S6 3 8.333 173.20 175 25
1.449038 9
S7 2 5.556 173.20 175 50
1.449038 9
W =ϒ th
kN
W Tnew =9.81 ∗0.76∗b∗d ' +W t
m3
∆ allowable=L/360
Bending Shearing
L W Tnew M max
Fb Fb Remark V max Fv Fv Remarks
s
S 3 1.51427 24.5 OK 2.49 0.38 OK
1 5 1.703559 6.675 2.271412 9
S 1.830 1.28688 24.5 OK 2.49 0.46 OK
2 6 1.447747 11.119 1.930329 3
S 3 1.51427 1.703559 24.5 6.675 OK 2.271412 2.49 0.38 OK
3 5 9
S 3 1.49688 24.5 OK 2.49 0.38 OK
4 5 1.683996 6.599 2.245327 5
S 3 1.30552 24.5 OK 2.49 0.33 OK
5 5 1.468716 5.755 1.958287 6
S 3 1.47699 24.5 OK 2.49 0.38 OK
6 7 1.661622 6.511 2.215495 0
S 2 1.51427 24.5 OK 2.49 0.26 OK
7 5 0.757137 2.967 1.514275 0
WL
V max =
2
W L2
M max =
8
6M
fb= 2
bd
3V
fv=
2 bd
5 W L4
δ=
b d3
384 E( )
12 ¿
¿
If f b< F b ,the dimensions is safe against bending , else change dimension
If actual < ∆allowable ,the dimension is safe against deflection , else change dimension
∆
If f v < FV , the dimensions is safe against shearing , else change dimension
Deflection
W Tnew ∆ allowable ∆ actual Remarks
S1 1.514275 8.333 7.313 OK
S2 1.286886 5.0833 2.361 OK
S3 1.514275 8.333 7.313 OK
S4 1.496885 8.333 7.229 OK
S5 1.305525 8.333 6.305 OK
S6 1.476997 8.333 7.133 OK
S7 1.514275 5.556 1.445 OK
Adjustment due to Slenderness
Le (m) Fb Cs Ck F’b (MPa)
S1 3 24.5 14.491 16.20344 19.275
S2 3 24.5 9.566 16.20344 23.508
S3 3 24.5 14.491 16.20344 19.275
S4 3 24.5 14.491 16.20344 19.275
S5 3 24.5 14.491 16.20344 19.275
S6 3 24.5 14.491 16.20344 19.275
S7 2 24.5 11.832 16.20344 22.178
led
Cs=
√ b2
If C s <10
If 10<C s <C k
E
Ck=0.811
√ Fb
If C k < Cs <50
1 Cs 4
F ' b=Fb[1− ( )
3 Ck
]
Design of Beams and Girders
Procedure
Part 1. Solving for Total Weight to be carried by Joists
a. Get the Total Weight due to Floor Sheathing
b. Calculate the Area of Openings of Walls within the Floor Joists
c. Choose the Stud Dimensions from NSCP Table 6.23.
d. Get the Total Weight due to Wall Studs within the Floor Joists considering Area of Openings
e. Get the Total Weight due to Walls within the Floor Joists considering Area of Openings
f. Sum up all the Weights.
Part 2. Design the Dimensions of the Floor Joists
a. Assume the width (b) of the floor joist.
b. Get the maximum shear and maximum moment due to the total weight.
c. Solve for the depth (d) using the allowable bending stress, shearing stress, and deflection.
d. Get the maximum d among the three.
Part 3
a. Solve for stress adjustments.
b. Solve for the new Weight of the building (include the self-weight of the joist already).
c. Investigate whether the dimensions will be safe due to the allowable bending stress, shearing
stress, and deflection.
Beam/ Weight due to joists and Floor Sheathing
Girder Length Joist Joist W W Resultant W
(m) (left) (right) (l-joist) (r-joist) (kN) (kN/m)
F4-B1 3 0 7 0 0.6849 4.7943 1.598
F3-B1 3 7 0 0.6849 0 4.7943 1.598
FA’-B2 1.680 0 4 0 0.2192 0.8768 0.522
F2-B1 3 0 7 0 0.6849 4.7943 1.598
F1-B1 3 7 0 0.6849 0 4.7943 1.598
F4-B2 3 0 7 0 0.6849 4.7943 1.598
F3-B2 3 7 7 0.6849 0.6849 9.5886 3.196
F2-B2 3 7 7 0.6849 0.6849 9.5886 3.196
F1-B2 3 7 0 0.6849 0 4.7943 1.598
FC-B2 3 0 7 0 0.6849 4.7943 1.598
FD-B2 3 7 0 0.6849 0 4.7943 1.598
FA”-B2 1.320 3 0 0.1292 0 0.3876 0.294
FA-B1 3
FA-B2 3
FA-B3 3
FB-B1 3
FB-B2 3 NO JOIST
FB-B3 3
FC-B1 3
FC-B3 3
Resultant =∑ W joist∗quantity
W =Resultant / Length
Opening
A(wall) m2 A(opening) m2 Area (m2) %
F4-B1 8.4 1.26 7.14 85
F3-B1 8.4 1.8 6.6 78.5714
FA’-B2 No Walls
F2-B1 No Walls
F1-B1 8.4 1.26 7.14 85
F4-B2 8.4 1.26 7.14 85
F3-B2 8.4 1.8 6.6 78.5714
F2-B2 8.4 1.8 6.6 78.5714
F1-B2 8.4 1.26 7.14 85
FC-B2 No Walls
FD-B2 No Walls
FA”-B2 No Walls
FA-B1 8.4 1.26 7.14 85
FA-B2 8.4 0 8.4 100
FA-B3 8.4 1.26 7.14 85
FB-B1 8.4 0 8.4 100
FB-B2 No Walls
FB-B3 8.4 0 8.4 100
FC-B1 8.4 1.26 7.14 85
FC-B3 8.4 1.26 7.14 85
A=A ( wall )− A (opening)
A
%=
(A (wall) )
∗100 %
Weight due to Studs
quantity
h (m) s (m) b (m) d (m) ϒ (kn/m3) (pcs) W(i) kN W (kN/m)
F4-B1 2.8 0.6 0.05 0.1 7.4556 5 0.4436 0.1479
F3-B1 2.8 0.6 0.05 0.1 7.4556 3 0.2460 0.0820
FA’-B2 No Walls
F2-B1 No Walls
F1-B1 2.8 0.6 0.05 0.1 7.4556 5 0.4436 0.1479
F4-B2 2.8 0.6 0.05 0.1 7.4556 5 0.4436 0.1479
F3-B2 2.8 0.6 0.05 0.1 7.4556 3 0.2460 0.0820
F2-B2 2.8 0.6 0.05 0.1 7.4556 3 0.2460 0.082
F1-B2 2.8 0.6 0.05 0.1 7.4556 5 0.4436 0.1470
FC-B2 No Walls
FD-B2 No Walls
FA”-B2 No Walls
FA-B1 2.8 0.6 0.05 0.1 7.4556 5 0.4436 0.1479
FA-B2 2.8 0.6 0.05 0.1 7.4556 5 0.5219 0.1740
FA-B3 2.8 0.6 0.05 0.1 7.4556 5 0.4436 0.1479
FB-B1 2.8 0.6 0.05 0.1 7.4556 5 0.5219 0.1740
FB-B2 No Walls
FB-B3 2.8 0.6 0.05 0.1 7.4556 5 0.5219 0.1740
FC-B1 2.8 0.6 0.05 0.1 7.4556 5 0.4436 0.1479
FC-B3 2.8 0.6 0.05 0.1 7.4556 5 0.4074 0.1479
ϒ bdh (quantity )(%)
W ( i )=
100
W =W ( i ) /L
Weight due to Exterior Walls (Wood:Bayok)
h (m) t (m) ϒ (kN/m3) W(i) kN/m W (kN/m)
F4-B1 2.8 0.02 4.3164 0.2055 0.0685
F3-B1 2.8 0.02 4.3164 0.1899 0.0633
FA’-B2 No Walls
F2-B1 No Walls
F1-B1 2.8 0.02 4.3164 0.2055 0.0685
F4-B2 2.8 0.02 4.3164 0.2055 0.0685
F3-B2 2.8 0.02 4.3164 0.1899 0.0633
F2-B2 2.8 0.02 4.3164 0.1899 0.0633
F1-B2 2.8 0.02 4.3164 0.2055 0.0685
FC-B2 No Walls
FD-B2 No Walls
FA”-B2 No Walls
FA-B1 2.8 0.02 4.3164 0.2055 0.0685
FA-B2 2.8 0.02 4.3164 0.2417 0.0806
FA-B3 2.8 0.02 4.3164 0.2055 0.0685
FB-B1 2.8 0.02 4.3164 0.2417 0.0806
FB-B2 No Walls
FB-B3 2.8 0.02 4.3164 0.2417 0.0806
FC-B1 2.8 0.02 4.3164 0.2055 0.0685
FC-B3 2.8 0.02 4.3164 0.2055 0.0685
ϒ ht(% )
W ( i )=
100
W =W ( i ) /L
L Wt ∆ allowable d d' b
3 1.8135 8.3333 141.22 150 100
F4-B1
3 1.7433 8.3333 139.37 150 100
F3-B1
1.680 0.5220 4.6666 52.21 100 100
FA’-B2
3 1.5980 8.3333 135.38 150 100
F2-B1
3 1.8135 8.3333 141.21 150 100
F1-B1
3 1.8135 8.3333 141.21 150 100
F4-B2
3 3.3413 8.3333 173.12 180 100
F3-B2
3 3.3413 8.3333 173.12 180 100
F2-B2
3 1.8135 8.3333 141.21 150 100
F1-B2
3 1.5980 8.3333 135.38 150 100
FC-B2
3 1.5980 8.3333 135.38 150 100
FD-B2
FA”- 1.320 0.2940 3.6666 33.88 100 100
B2
3 0.2155 8.3333 69.40 100 100
FA-B1
3 0.2546 8.3333 73.39 100 100
FA-B2
3 0.2155 8.3333 69.40 100 100
FA-B3
3 0.2546 8.3333 73.39 100 100
FB-B1
3 0.0000 8.3333 0.00 100 100
FB-B2
3 0.2546 8.3333 73.39 100 100
FB-B3
3 0.2155 8.3333 69.40 100 100
FC-B1
3 0.2155 8.3333 69.40 100 100
FC-B3
For beams,
W T =W ( joist∧floor sheathing )+ W (walls∧studs)
The value of b is assumed
Bending Shearing
W Tnew M max Fb fb Remarks V max Fv fv Remarks
1.9606 2.2057 24.5 5.8819 OK 2.9410 2.49 0.2490 OK
F4-B1
1.8905 2.1268 24.5 5.6714 OK 2.8357 2.49 0.2490 OK
F3-B1
0.6201 0.2188 24.5 1.3126 OK 0.5209 2.49 0.3735 OK
FA’-B2
1.7452 1.9633 24.5 5.2355 OK 2.6177 2.49 0.2490 OK
F2-B1
1.9606 2.2057 24.5 5.8819 OK 2.9410 2.49 0.2490 OK
F1-B1
1.9606 2.2057 24.5 5.8819 OK 2.9410 2.49 0.2490 OK
F4-B2
3.5179 3.9576 24.5 7.3289 OK 5.2768 2.49 0.2075 OK
F3-B2
3.5179 3.9576 24.5 7.3289 OK 5.2768 2.49 0.2075 OK
F2-B2
1.9606 2.2057 24.5 5.8819 OK 2.9410 2.49 0.2490 OK
F1-B2
1.7452 1.9633 24.5 5.2355 OK 2.6177 2.49 0.2490 OK
FC-B2
1.7452 1.9633 24.5 5.2355 OK 2.6177 2.49 0.2490 OK
FD-B2
0.3921 0.0854 24.5 0.5124 OK 0.2588 2.49 0.3735 OK
FA”-B2
0.3136 0.3528 24.5 2.1167 OK 0.4704 2.49 0.3735 OK
FA-B1
0.3527 0.3968 24.5 2.3805 OK 0.5290 2.49 0.3735 OK
FA-B2
0.3136 0.3528 24.5 2.1167 OK 0.4704 2.49 0.3735 OK
FA-B3
0.3527 0.3968 24.5 2.3805 OK 0.5290 2.49 0.3735 OK
FB-B1
0.0981 0.1104 24.5 0.6622 OK 0.1472 2.49 0.3735 OK
FB-B2
0.3527 0.3968 24.5 2.3805 OK 0.5290 2.49 0.3735 OK
FB-B3
0.3136 0.3528 24.5 2.1167 OK 0.4704 2.49 0.3735 OK
FC-B1
0.3136 0.3528 24.5 2.1167 OK 0.4704 2.49 0.3735 OK
FC-B3
kN
W Tnew =9.81 ∗0.76∗b∗d ' +W t
m3
Deflection
W Tnew ∆ deflection ∆ actual Remarks
1.9606 8.3333 7.5176 OK
F4-B1
1.8905 8.3333 7.2488 OK
F3-B1
0.6201 4.6666 0.7892 OK
FA’-B2
1.7452 8.3333 6.6917 OK
F2-B1
1.9606 8.3333 7.5176 OK
F1-B1
1.9606 8.3333 7.5176 OK
F4-B2
3.5179 8.3333 7.8061 OK
F3-B2
3.5179 8.3333 7.8061 OK
F2-B2
1.9606 8.3333 7.5176 OK
F1-B2
1.7452 8.3333 6.6917 OK
FC-B2
1.7452 8.3333 6.6917 OK
FD-B2
FA”- 0.3921 3.6666 0.1902 OK
B2
0.3136 8.3333 4.0583 OK
FA-B1
0.3527 8.3333 4.5643 OK
FA-B2
0.3136 8.3333 4.0583 OK
FA-B3
0.3527 8.3333 4.5643 OK
FB-B1
0.0981 8.3333 1.2695 OK
FB-B2
0.3527 8.3333 4.5643 OK
FB-B3
0.3136 8.3333 4.0583 OK
FC-B1
0.3136 8.3333 4.0583 OK
FC-B3
Adjustment due to Slenderness Adjustment due to Size Factor
le
(m) Cs Ck F'b (Mpa) Cf F'b (Mpa) F'b (Mpa)
5.6 4.5826 1.0801 24.4478
F4-B1 16.2034 24.5 24.5
5.6 4.5826 1.0801 24.4478
F3-B1 16.2034 24.5 24.5
2.96 2.7203 1.1298 24.4935
FA’-B2 16.2034 24.5 24.5
5.6 4.5826 1.0801 24.4478
F2-B1 16.2034 24.5 24.5
5.6 4.5826 1.0801 24.4478
F1-B1 16.2034 24.5 24.5
5.6 4.5826 1.0801 24.4478
F4-B2 16.2034 24.5 24.5
5.6 5.0200 1.0584 24.4248
F3-B2 16.2034 24.5 24.5
5.6 5.0200 1.0584 24.4248
F2-B2 16.2034 24.5 24.5
5.6 4.5826 1.0801 24.4478
F1-B2 16.2034 24.5 24.5
5.6 4.5826 1.0801 24.4478
FC-B2 16.2034 24.5 24.5
5.6 4.5826 1.0801 24.4478
FD-B2 16.2034 24.5 24.5
FA”- 2.24 2.3664 1.1298 24.4963
B2 16.2034 24.5 24.5
3.7417 1.1298 24.4768
FA-B1 7.68 16.2034 24.5 24.5
3.7417 1.1298 24.4768
FA-B2 7.68 16.2034 24.5 24.5
3.7417 1.1298 24.4768
FA-B3 9.6 16.2034 24.5 24.5
3.7417 1.1298 24.4768
FB-B1 7.68 16.2034 24.5 24.5
3.7417 1.1298 24.4768
FB-B2 7.68 16.2034 24.5 24.5
3.7417 1.1298 24.4768
FB-B3 9.6 16.2034 24.5 24.5
3.7417 1.1298 24.4768
FC-B1 7.68 16.2034 24.5 24.5
3.7417 1.1298 24.4768
FC-B3 9.6 16.2034 24.5 24.5
Adjustment due to slenderness factor
❑
C f =¿
Ground Floor
Design of Floor Sheathing
Sheathing Dimensions (m)
Slab
length (s) length(l) spacing(s) panel(t) panel(w) Quantity
S1 3 3 0.4 0.016 0.6 10
S2 3 3 0.4 0.016 0.6 10
S3 3 3 0.4 0.016 0.6 10
S4 3 3 0.4 0.016 0.6 10
S5 3 3 0.4 0.016 0.6 10
S6 3 3 0.4 0.016 0.6 10
S7 3 2 Weight
0.4 due to panels
0.016 0.6 10
ϒ WLL
Design of Floor (kN/m3) E Mpa WDL kPa kPa W (kN/m) Joist
S-1 7.4556 9780 0.5964 1.9 0.99857
S-2 7.4556 9780 0.5964 1.9 0.99857
S-3 7.4556 9780 0.5964 1.9 0.99857
S-4 7.4556 9780 0.5964 1.9 0.99857
S-5 7.4556 9780 0.5964 1.9 0.99857
S-6 7.4556 9780 0.5964 1.9 0.99857
S-7 7.4556 9780 0.5964 1.9 0.99857
Weight due to Wall Studs
quantity
L (wall) m h (m) s (m) b (m) d (m) ϒ (kN/m3) W (kN/m)
(pcs)
S-1 3 3 0.6 0.05 0.1 7.4556 6 0.223668
S-2 0 3 0.6 0.05 0.1 7.4556 0 0
S-3 1.950 3 0.6 0.05 0.1 7.4556 4 0.22940
S-4 0 3 0.6 0.05 0.1 7.4556 0 0.19136
S-5 0 3 0.6 0.05 0.1 7.4556 0 0
S-6 3 3 0.6 0.05 0.1 7.4556 6 0.223668
S-7 0 3 0.6 0.05 0.1 7.4556 0 0
Weight due to Walls (Bayok was used)
h ρ
(m) t (m) (kg/m3) ϒ (kN/m3) W (kN/m)
S-1 3 0.02 0.44 4.3164 0.258984
S-2 3 0.02 0.44 4.3164 0.258984
S-3 3 0.02 0.44 4.3164 0.258984
S-4 3 0.02 0.44 4.3164 0.258984
S-5 3 0.02 0.44 4.3164 0.258984
S-6 3 0.02 0.44 4.3164 0.258984
S-7 3 0.02 0.44 4.3164 0.258984
L Wt ∆ allowable d d' b
S 3 8.333
174.15 175 50
1 1.481
S 3 8.333
167.19 175 50
2 1.258
S 3 8.333
174.33 175 50
3 1.487
S 3 8.333
173.208 175 50
4 1.449
S 3 8.333
167.194 175 50
5 1.258
S 3 8.333
174.1568 175 50
6 1.481
S 2 5.556
123.35 125 50
7 1.258
Bending Shearing
L W Tnew M max
FB fb Remark V max Fv fv Remarks
s
S 3 24.5 OK 2.49
1 1.5465 1.7398 6.8170 2.3197 0.3977 OK
S 3 24.5 OK 2.49
2 1.3228 1.4881 5.8311 1.9842 0.3401 OK
S 3 24.5 OK 2.49
3 1.5522 1.7462 6.8423 2.3283 0.3991 OK
S 3 24.5 OK 2.49
4 1.5142 1.7034 6.6746 2.2712 0.3894 OK
S 3 24.5 OK 2.49
5 1.3228 1.4881 5.8311 1.9842 0.3401 OK
Deflection
S 3 24.5 OK 2.49
6 1.5465 1.7398 W Tnew6.8170
∆ allowable ∆ actual 2.3197
Remarks 0.3977 OK
S 2 S1 24.5
1.5465 8.333 OK7.313 OK 2.49
7 1.3042 0.6521
S2 1.32285.0079
8.333 2.361 1.3042
OK 0.3130 OK
S3 1.5522 8.333 7.313 OK
S4 1.5142 8.333 7.229 OK
S5 1.3228 8.333 6.305 OK
S6 1.5465 8.333 7.133 OK
S7 1.3042 5.556 1.445 OK
Adjustment due to Slenderness
Le Ck F’b (MPa)
Fb Cs
(m)
S 3 24.5
1 14.491 16.2034 19.2754
S 3 24.5
2 14.491 16.2034 19.2754
S 3 24.5
3 14.491 16.2034 19.2754
S 3 24.5
4 14.491 16.2034 19.2754
S 3 24.5
5 14.491 16.2034 19.2754
S 3 24.5
6 14.491 16.2034 19.2754
S 2 24.5
7 10.000 16.2034 23.3153
Design of Beams
Beam/ Weight due to joists and Floor Sheathing
Girder Length Joist Joist W W Resultant W
(m) (left) (right) (l-joist) (r-joist) (kN) (kN/m)
F4-B1 3 0 7 0 0.6849 4.7943 1.598
F3-B1 3 7 0 0.6849 0 4.7943 1.598
F2-B1 3 0 7 0 0.6849 4.7943 1.598
F1-B1 3 7 0 0.6849 0 4.7943 1.598
F4-B2 3 0 7 0 0.6849 4.7943 1.598
F3-B2 3 7 7 0.6849 0.6849 9.5886 3.196
F2-B2 3 7 7 0.6849 0.6849 9.5886 3.196
F1-B2 3 7 0 0.6849 0 4.7943 1.598
FC-B2 3 0 7 0 0.6849 4.7943 1.598
FD-B2 3 7 0 0.6849 0 4.7943 1.598
FA-B1 3
FA-B2 3
FA-B3 3
FB-B1 3
FB-B2 3 NO JOIST
FB-B3 3
FC-B1 3
FC-B3 3
F3-B3 2
F2-D3 2
Opening
A(opening)
A(wall) m2 m2 Area (m2) %
7.74
F4-B1 9 1.26 86
9
F3-B1 9 0 100
7.2
F2-B1 9 1.8 80
7.74
F1-B1 9 1.26 86
7.74
F4-B2 9 1.26 86
F3-B2 No Wall
F2-B2 No Wall
F1-B2 9 1.26 7.74 86
FC-
B2 No Wall
FD-
B2 9 3.15 5.85 65
FA-B1 9 1.28 7.74 86
FA-B2 9 0 9 100
FA-B3 9 1.28 7.74 86
FB-B1 No Wall
FB-B2 No Wall
FB-B3 9 0 9 100
FC-
B1 9 1.28 7.74 86
FC-
B3 9 1.26 7.74 86
F3-B3
6 1.26 4.74 79
F2-B3 6 1.26 4.74 79
Weight due to Studs
quantity
h (m) s (m) b (m) d (m) ϒ (kn/m3) (pcs) W(i) kN W (kN/m)
F4-B1 3 0.6 0.05 0.1 7.4556 5 0.0962 0.1479
F3-B1 3 0.6 0.05 0.1 7.4556 5 0.1118 0.0820
F2-B1 3 0.6 0.05 0.1 7.4556 5 0.0895
F1-B1 3 0.6 0.05 0.1 7.4556 5 0.0962
F4-B2 3 0.6 0.05 0.1 7.4556 5 0.0962 0.1479
F3-B2 No Wall
F2-B2 No Wall
F1-B2 3 0.6 0.05 0.1 7.4556 5 0.0962 0.082
FC-B2 No Wall
0.0727
FD-B2 3 0.6 0.05 0.1 7.4556 5
FA-B1 3 0.6 0.05 0.1 7.4556 5 0.0962 0.1479
FA-B2 3 0.6 0.05 0.1 7.4556 5 0.1118 0.1740
FA-B3 3 0.6 0.05 0.1 7.4556 5 0.0962 0.1479
FB-B1 No Wall
FB-B2 No Wall
FB-B3 3 0.6 0.05 0.1 7.4556 5 0.1118 0.1740
FC-B1 3 0.6 0.05 0.1 7.4556 5 0.0962 0.1479
FC-B3 3 0.6 0.05 0.1 7.4556 5 0.0962 0.1479
F3-B3 3 0.6 0.05 0.1 7.4556 5 0.0883 0.1479
F2-B3 3 0.6 0.05 0.1 7.4556 5 0.0883 0.1479
Weight due to Exterior Walls (Wood:Bayok)
h (m) t (m) ϒ (kN/m3) W(i) kN/m W (kN/m)
F4-B1 3 0.02 4.3164 0.2055 0.0685
F3-B1 3 0.02 4.3164 0.1899 0.0633
F2-B1 3 0.02 4.3164
F1-B1 3 0.02 4.3164
F4-B2 3 0.02 4.3164 0.2055 0.0685
F3-B2
F2-B2
F1-B2 3 0.02 4.3164 0.1899 0.0633
FC-B2 No Wall
FD-B2 3 0.02 4.3164
FA-B1 3 0.02 4.3164 0.2055 0.0685
FA-B2 3 0.02 4.3164 0.2417 0.0806
FA-B3 3 0.02 4.3164 0.2055 0.0685
FB-B1
FB-B2 No Walls
FB-B3 3 0.02 4.3164 0.2417 0.0806
FC-B1 3 0.02 4.3164 0.2055 0.0685
FC-B3 3 0.02 4.3164
F3-B3 2 0.02 4.3164
F2-B3 2 0.02 4.3164 0.2055 0.0685
