SURVEYING INSTRUMENTS

Series030R
Reflectorless Total Stations
with Integrated Data Collectors

Take the Lead with Superior EDM Performance

and Powerful SDR Software

0.3m to 350m /
1ft. to 1,140ft.
Reflectorless Range

Laser beam image is simulated.

Guide Light Unit is a factory option.
 Innovative RED-tech EDM
Makes Reflectorless Dista

■ EDM technology takes a big leap forward with state-of-the-art RED-tech II EDM
Pinpoint reflectorless measurement over an ultra-wide range
RED-tech II EDM retains the best of first-generation RED-tech EDM technology —including close-range reflectorless measurement from just 0.3m
(1ft.)—and takes it to a whole new level of performance.

● 350m or 200m—choose the range you need ● High-speed measurement now

The Class 3R laser models provide reflectorless measurement over 30% faster*
up to 350m (1,140 ft.), while the Class 2 laser models cover a Measurement is fast at every 0.9 second
range up to 200m (650ft.). All models offer measurement from and just 2.2 seconds for the initial
as close as 0.3m (1ft.) for reflectorless measurement over a measurement (in fine mode) for speed
tremendous range of distances, while assuring survey-grade gains of over 30%.
350m accuracy. * Compared with first-generation RED-tech EDM
(1,140ft.) models.

● Reflectorless measurement range and accuracy with a Kodak Gray Card ● Distance measurement speed
SET1030R3 • SET2030R3 • SET3030R3 (standard models) First-generation
0.3m Class 3R laser products RED-tech EDM
(1ft.) White side 30% faster
90% reflective ±(3 + 2ppm x D)mm ±(5 + 10ppm x D)mm RED-tech II EDM

200m (650ft.) 350m (1,140ft.)

Gray side ±(3 + 2ppm x D)mm
18% reflective ±(5 + 10ppm x D)mm
0.3m (1ft.) 100m (320ft.) 170m (550ft.)

SET1030R • SET2030R • SET3030R (factory options)

Class 2 laser products
White side ±(5 + 10ppm x D)mm
±(3 + 2ppm x D)mm
90% reflective
100m (320ft.) 200m (650ft.)
Gray side
18% reflective ±(5 + 5ppm x D)mm
0.3m (1ft.) 45m (140ft.) 80m (260ft.)
±(3 + 2ppm x D)mm

■ The proven technology behind RED-tech II EDM

RED-tech II EDM is a high-performance phase-comparison measuring system that delivers
unprecedented distance measurement of a variety of objects under conditions difficult or
impossible with other EDMs.
● Phase-comparison measurement
RED-tech II EDM uses phase comparison technology, which provides notable advantages in accuracy
compared with EDMs using pulse measurement methods. Combined with Sokkia's leading edge digital
signal processing technology and refined optics, superbly accurate reflectorless measurement is now a
reality.

● Digital signal processing

RED-tech II EDM simultaneously samples measuring signals in three different frequencies and
calculates distances using advanced digital signal processing software. A calculation method best
suited to the condition of the measuring signals is selected, and receiving signals are amplified to
ensure a high level of reliability. Thanks to leading-edge signal processing techniques, RED-tech II EDM
delivers superior accuracy and with greater speed and efficiency compared with conventional EDMs. Conventional optics RED-tech II optics

● High-precision optics
Sokkia has further refined its traditional optics system, which emits measuring light from the objective
lens center and receives the returning light along its periphery.
With enhanced optics that provide the ideal light path, RED-tech II EDM dramatically increases reliability
by emitting the laser beam from in front of the objective lens to eliminate errors caused by internal
reflection. And its highly tunable optical components ensure that only the necessary returning light is
directed to the receiver for faster, more efficient measurement. What’s more, the telescope provides an Sokkia’s newly developed optics system
extremely bright and sharp sight, and its compact size makes sighting easier than ever.
With its one light source, with its one optics system, RED-tech II EDM emits an ultra-narrow visible laser
beam along the same axis as the telescope’s sighting axis to enable accurate pointing using a distinct
laser spot, pinpoint reflectorless measurement, as well as long-range distance measurement using
prisms or reflective sheet targets.
nce Measurement More Powerful Than Ever

■ Ultra-narrow visible laser for pinpoint accuracy

A
A Series030R: The ultra-narrow laser beam enables
accurate measurements through obstacles such as
chain-link fences, tree branches, etc.
Broader beam models: Both the fence and wall get measured, which
leads to erroneous measurement.
B
C
Series030R:
Measurements at
small incident
angles, such as with
A manholes on the
C road surface, are
B handled with high
B precision by the
Series030R: ultra-narrow laser
The measuring beam is measuring beam.
extremely narrow, so Broader beam models:
distances to walls and Wider measuring beams end
corners can be measured up covering a larger area
with pinpoint accuracy. than expected at small
incident angles, resulting in
Broader beam models: A wide
measurements that are too
measuring beam hits points near C long or short.
and far at the same time, resulting
in inaccurate measurement.

The Series030R employs an ultra small-diameter visible laser to obtain measurements with pinpoint
accuracy. Fine objects, as well as the corners of walls and other structures, can be measured precisely.
You can also make accurate measurements through obstacles such as chain-link fences and tree
branches.

■ Laser-pointer function
The visible laser beam can be conveniently used as a laser pointer for interior leveling work, vertical
alignment, setting out, and other tasks.

■ Long-distance measurement with reflectors

Measure long distances by directing the laser beam at a reflector. When using a single AP prism, you can
measure as far as 5,000m (16,400ft.)* at once, with an accuracy of ±(2 + 2ppm x D)mm. In addition, reflective
sheet targets may be used to get measurements of up to 500m (1,640ft.)** with ±(3 + 2ppm x D)mm precision.
Choose from Sokkia’s wide selection of sheet targets to suit your needs. Rotating pin-pole targets, two-point
target for measuring hidden points, and many other innovative reflective targets are available.
* In good weather conditions. ** When using RS90N-K.

In the reflective sheet or prism modes, maximum laser output is automatically reduced to
0.22mW. This is equivalent to the level of a Class 1 laser. The Series030R also includes a
safety filter in the telescope, which protects your eye from the laser beam if you happen to
sight a reflective prism or sheet target while in reflectorless mode.
 Enhanced Hardware Relia

■ Sokkia’s original absolute encoders ■ Data and status checks at a glance

Each Series030R total station has a built-in control panel on both
sides of its body. These control panels have a clearly visible 8-line
LCD screen that lets you quickly check EDM mode (reflectorless,
prism, or reflective sheet target), laser beam mode, guide light
LED function, and more.
CCD

Absolute encoder disk

Encoder diagram

The Series030R total stations are equipped with Sokkia-developed

absolute encoders. These encoders feature the RAB (RAndom Bi-
directional) code technology first used in the SDL30 digital level,
which provides high stability and reliability. You do not need to reset
for 0 indexing at the start of a job, so surveying can begin from the
moment you turn on the power. Work efficiency is also boosted by
the immediate display of azimuth whenever you restart the total
station. Reflectorless

■ Triple-axis compensation for high Reflective sheet target Prism

reliability
Vertical and horizontal angles are compensated for by a dual-axis
compensator that detects the tilt of the total station in two directions.
In addition, a collimation function corrects the deviation of the ■ Easy target selection
telescope’s mechanical axis. Working together, these features offer
Selecting a target is amazingly simple. During basic mode operation,
maximum reliability with angle measurements.
you can switch between reflectorless, prism, and reflective sheet
target modes just by pressing the SFT key in sequence, and the icon
■ Password function for security of the selected target is displayed on the LCD screen for easy
confirmation.
The Series030R provides a password-protection function for security
purposes. You can assign your own password to the instrument to
prevent unauthorized use. ■ Full alphanumeric keyboard with
easy-to-use softkeys
■ Large internal memory Alphanumeric keys are laid out for the fastest possible operation.
Entering job names, point numbers, point names, coordinate values,
The large internal memory can store approx. 8,800 data points in and processing surveying data can be done quickly and efficiently.
SDR33 format. Its multiple job file structure allows you to create an Furthermore, four easy-to-use softkeys are included to simplify
unlimited number of job files. measurement operation.

■ CompactFlash card drive ■ Superior environmental protection

A card drive for commercially available Featuring advanced protection against dust and water, the
CF memory cards (Type 1) is included as Series030R total stations are able to withstand harsh environmental
a standard feature. With this card drive, conditions (IP64 compliant).
your memory capacity becomes virtually
unlimited. Approx. 608,000 data points
can be stored on an 64MB card. Cards up The International Electrotechnical Commission standard IEC 60529 describes a system for
to 512MB are supported. classifying degrees of protection provided by enclosures of electrical equipment.
The IP Code consists of the letters IP and two numerals. Larger numbers represent greater
levels of protection.
Protection against ingress of Protection against ingress of
solid foreign objects water
Highest level: 6 Highest level: 8
7 levels: 0 to 6. 9 levels: 0 to 8.
X: unspecified. X: unspecified.
bility and Increased Productivity

■ SF14 wireless keyboard (option) ■ Guide Light Unit GDL2 (factory option)
The SF14 wireless keyboard has a
total of 37 keys (including
alphanumeric keys, softkeys, and
measurement controls), to enable
quick and easy data entry of point
names and coordinate values.
Because all key
operations can be
performed with this The Guide Light Unit GDL2 boosts efficiency with setting-out jobs. Its
wireless keyboard, guide light is composed of two lights of different colors that are
you won’t need to emitted from one aperture. From the left side, you see only a green
touch the total station after it’s been aimed at the light; from the right, only a red light. And when you see green and
target. Protection against dust and water is red flashing back and forth simultaneously, that means you are on
another advantage, as you can use the keyboard the telescope sighting direction. The GDL2 has a range of up to
without worry in the rain or at a dusty construction 150m (490ft.). A special flashing pattern is also included to assist
site (IP44 compliant). The SF14 wireless users with color weakness.
keyboard can also be used with Series30R and
Series10 total stations.

■ FOF sensors
The light may be used up to a range of A special flashing pattern is also included
Sokkia’s original and extremely compact FOF 150m (490ft.). to assist users with color weakness.
(Fiber made of Optical Filter material) sensors
are mounted on two sides of Series030R total Guide Light Unit GDL2 Green LED (524nm) and Red LED (630nm) (IEC Class 1 LED)
stations for communication with the optional Visible range 1.3m to 150m (4.3ft. to 490ft.)
SF14 wireless keyboard. These sensors are Visible width Horizontal & vertical: more than ±4˚; approx. 7m at 100m (23ft. at 320ft.)
extremely resistant to light interference, and Center resolution Within 4'; approx. 12cm at 100m (4.7in. at 320ft.)
The Guide Light Unit cannot be used simultaneously with the laser pointer function.
have a wide signal reception range to allow
comfortable use of the keyboard.
FOF sensor

■ Two battery types: Ni-MH and Ni-Cd

The BDC35A Ni-MH battery* gives you 6 hours of continuous angle
and distance measurement with Class 3R laser models. The optional
Ni-Cd battery (BDC40A) offers longer operation in low temperatures.
* Standard equipment.

Optional accessories
SF14 wireless keyboard • Guide Light Unit GDL2 (factory option) •
CDC41 car cigar sockets charger • BDC40A Ni-Cd battery • BDC57 Ni-
MH external battery • EDC3A power cable for BDC57 (2m), EDC7A
power cable for BDC57 (0.5m), CDC14 battery charger for BDC57 •
EDC2A AC adaptor (100 to 240V) • OF3A solar filter • DE25 diagonal
eyepiece • EL7 40x eyepiece • DOC46 printer cable • DOC25 (25 pins,
male), DOC26 (25 pins, female), DOC27 (9 pins, female), DOC1 (w/o
connector) interface cables • ACE5 auto-collimation eyepiece

*1
3R 2
*1 *2 *3 *4 *2
8,800points
*1 Factory option *2 Option *3 With SDR2x format *4 With SDR33 format
 Powerful SDR Software for
Now with SFX Function to

■ Versatile data collection

To maximize job efficiency in the field, the Series030R total stations come fully loaded with Expert, the comprehensive data collection
software from Sokkia. Expert provides an integrated solution to a wide variety of data collection and processing tasks.

S U RV COGO ROAD
Topography Set out cords Select road
Traverse adjustment Set out line Set out road
Resection Set out arc Set out road surface
Set collection Resection Road topo
Set review Inverse Cross-section survey
Building face survey Areas Define road
Collimation Intersections Review road
Tilt offset Point projection Define template
Remote elevation Taping from baseline Review template
Keyboard input Transformation
Keyboard input

■ Enhanced productivity during reflectorless measurement

When you're using Expert, the superior reflectorless measurement capability of the Series030R will ensure unprecedented
productivity with most tasks.

SURVEY (SURV)
The Survey program greatly simplifies topography, traverse surveying, building face surveying, and other applications.

■ Topography ■ Traverse Adjustment

The Series030R can average multiple observations for more The Traverse Adjustment program allows you to specify a sequence
accurate results. Tolerances are definable by the user. This of stations through which a traverse may be calculated and
program includes three types of convenient offset measurement optionally adjusted. The observations do not have to be made in the
functions: "two-distance offset," "single-distance offset," and "angle same order as the traverse route.
offset" for hidden points that cannot be observed directly.

■ Set Collection ■ Building Face Survey Building face survey

Z C
The Series030R averages observations collected on Face 1 and The Building Face Survey program N

Face 2 of the instrument and also averages multiple sets of allows points on both vertical and
B
observations. The resulting observations can be used either for non-vertical planes to be coordinated 1
traverse calculations or resection calculations. by angle-only-observations in order A
to pick up details of a building where 2
the prism cannot be placed. E
Angles and distance observations to 1 and 2 define a vertical plane.
Angles and distance observations to A, B and C define an inclined plane.

ROADING (ROAD)
The Roading program is one of the most comprehensive and powerful setting out solutions for road construction work. Horizontal
alignment, vertical alignment, templates, side-slopes, road cross-sections, super-elevation, and widening can be defined as desired.
Any point along the road can then be set out by specifying its station and offset.

■ Set Out Road Surface

The Set Out Road Surface program allows setting out of the cut or
OFFSET
fill at any point on a road surface. Simply take a reading, and the DISTA
NCE
FILL
cut/fill value is displayed. The design elevation can then be set if STATION
CL 0+00
required.

Wireless
Complex Field Operations—
Enable Wireless Data Transfer

COGO
The Series030R offers a comprehensive suite of functions designed to carry out data collection, field calculations, and various
setting-out tasks for civil engineering and construction. These streamlined functions dramatically increase productivity.

■ Set Out Line ■ Set Out Arc

The Set Out Line program is used for setting out and checking The Set Out Arc program provides a generalized arc calculator to
alignment of curb lines, construction boards, and grades of pipes. A allow the definition of curves from almost any combination of
baseline or an offset from baseline can be defined. parameters. Points along the arc can be coordinated and directly set
out.
FROM POINT
Previously surveyed TO POINT MEASURED POINT POINT OF
point with known Trial to locate a point INTERSECTION
coordinates with a known relationship
OFFSET
to the line TAN
GEN
T

TO POINT
Point located in the field ET
which defines edge of road; FROM POINT OF
FS

FROM POINT surveyed at time of setting out PREDEFINED

RA INCREMENTS
DIU
S
TO POINT DELTA

PREDE
FINED
INCRE
MENT
S

■ Taping from Baseline ■ Transformations

The Taping from Baseline program allows The Series030R transforms the job coordinates to a different
you to set out by distance and offset from coordinate system. Helmert transformations and linear
the baseline or to collect the transformations are available.
topographical details by distance and
T4
T3

offset.
T2
OFFSE
OFFSE

T1
OFFSE

BASE
OFFSE

LINE

DISTAN DIST DISTAN

CE 4 DISTAN ANCE 2 CE 1
CE 3

Sokkia Field-info Xpress System Diagram

Instantaneous data transfer between any worksite and your office.

The Series030R can send

surveyed data to a specified
e-mail address or FTP
server. It can also receive
coordinate data for setting-
out from your office computer Mobile phone with Interface cable Interface cable
modem incorporated or for your mobile phone
or FTP server. Public locally supplied
telephone
Just connect a mobile phone (and modem, if necessary) to the Fixed-line
telephone
Series030R using the appropriate cables, establish an Internet Modem
Interface cable
connection, and select the job files. Multiple job files can be sent out
simultaneously. Data should be in the SDR33, SDR2x or CSV SFX requires connectivity using a mobile phone with a service provider
format. All SFX functions can be performed via the Series030R’s capable of e-mail data transfer to an external source, as well as an active
operation panel. e-mail account and FTP server. Consult your local telecoms operator for
proper equipment and connectivity requirements.
Password protection is available to prevent unauthorized use.
Series030R Integrated Data Collectors
Reflectorless Total Stations with

SET1030R3 · SET2030R3 · SET3030R3 · SET1030R · SET2030R · SET3030R

SPECIFICATIONS
Model 5-6!4! 5-6 !4! 5-6!!4! 5-6!4 5-6 !4 5-6!!4
Availability Standard models Factory options
Laser class*1 Class 3R Laser Product Class 2 Laser Product
Telescope Fully transiting, coaxial sighting and distance measuring optics
Length: 171mm (6.7in.), Objective aperture: 45mm (1.8in.) (EDM 48mm (1.9in.)), Magnification: 30x, Resolving power: 2.5",
Image: Erect, Field of view: 1˚30' (26m/1,000m), Minimum focus: 1.3m (4.3ft.), Reticle glass: ∞ mark printed,
Reticle illumination: 5 brightness levels
Angle measurement Photoelectrical absolute encoder scanning. Both circles adopt diametrical detection.
Unit Degree / Gon / Mil, selectable
Display resolutions (selectable) 0.5" / 1", 0.1 / 0.2mg, 0.002 / 0.005mil 1" / 5", 0.2 / 1mg, 0.5" / 1", 0.1 / 0.2mg, 0.002 / 0.005mil 1" / 5", 0.2 / 1mg,
0.005 / 0.02mil 0.005 / 0.02mil
Accuracy (ISO 17123-3:2001) 1" / 0.3mg / 0.005mil 2" / 0.6mg / 0.01mil 3" / 1mg / 0.015mil 1" / 0.3mg / 0.005mil 2" / 0.6mg / 0.01mil 3" / 1mg / 0.015mil
Measuring time 0.5s or less, continuous
Measurement mode H: Clockwise / Counterclockwise, selectable. 0 set, Angle input, available. V: Zenith 0 / Horizontal 0, selectable
Automatic dual-axis compensator Dual-axis liquid tilt sensor, Working range: ± 3' (± 55mg)
Collimation compensation On / Off, selectable
Fine motion screws Fine / Coarse 2-speed motion
Distance measurement Modulated laser, phase comparison method with red laser diode, coaxial optics
Laser output Reflectorless mode: Class 3R (max. 5mW) Reflectorless mode: Class 2 (max. 0.99mW)
Prism/Sheet mode: Class 1 equivalent (max. 0.22mW) Prism/Sheet mode: Class 1 equivalent (max. 0.22mW)
Unit Meters / feet / US feet, selectable
Measuring range Reflectorless*2 0.3 to 350m (1 to 1,140ft.) (White side, 90% reflective) 0.3 to 200m (1 to 650ft.) (White side, 90% reflective)
(slope distance) (using Kodak Gray Card) 0.3 to 170m (1 to 550ft.) (Gray side, 18% reflective) 0.3 to 80m (1 to 260ft.) (Gray side, 18% reflective)
With reflective sheet target RS90N-K: 1.3 to 500m (1,640ft.), RS50N-K: 1.3 to 300m (980ft.), RS10N-K: 1.3 to 100m (320ft.)
With mini prisms CP01: 1.3 to 800m (2,620ft.), OR1PA: 1.3 to 500m (1,640ft.)
With 1 AP prism Under average conditions*4: 1.3 to 4,000m (13,120ft.), Under good conditions*5: 1.3 to 5,000m (16,400ft.)
With 3 AP prisms Under average conditions*4: to 5,000m (16,400ft.), Under good conditions*5: to 6,000m (19,680ft.)
Display resolutions Fine mode 0.0001 / 0.001m (0.001 / 0.01ft.) 0.001m (0.01ft.) 0.0001 / 0.001m (0.001 / 0.01ft.) 0.001m (0.01ft.)
Rapid single / Tracking Rapid single: 0.001m (0.01ft.) / Tracking: 0.01m (0.1ft.)
Accuracy Reflectorless*2/*3 0.3 to 200m (1 to 650ft.): ± (3 + 2ppm x D)mm 0.3 to 100m (1 to 320ft.): ± (3 + 2ppm x D)mm
(D=measuring (Fine mode) Over 200 to 350m (over 650 to 1,140ft.): ± (5 + 10ppm x D)mm Over 100 to 200m (over 320 to 650ft.): ± (5 + 10ppm x D)mm
distance, unit:mm) Reflectorless*2/*3 0.3 to 200m (1 to 650ft.): ± (6 + 2ppm x D)mm 0.3 to 100m (1 to 320ft.): ± (6 + 2ppm x D)mm
(Rapid single mode) Over 200 to 350m (over 650 to 1,140ft.): ± (8 + 10ppm x D)mm Over 100 to 200m (over 320 to 650ft.): ± (8 + 10ppm x D)mm
With reflective sheet target Fine: ± (3 + 2ppm x D)mm, Rapid single: ± (6 + 2ppm x D)mm
With prism Fine: ± (2 + 2ppm x D)mm, Rapid single: ± (5 + 2ppm x D)mm
Measuring time Fine mode Repeat: Every 0.9s (initial 2.2s), Single: 2.2s
Rapid single / Tracking Rapid single: 2.0s / Tracking: Every 0.3s (initial 2.0s)
Measuring mode Fine (single / repeat), Rapid (single), Tracking
Atmospheric correction / Prism constant correction Temperature, Pressure, Humidity, ppm input available / -99 to +99mm (1mm steps). 0 fixed in reflectorless mode.
Refraction & earth-curvature correction Yes (K=0.14 / 0.20) / No, selectable
Scale factor setting / Sea level correction 0.5 to 2.0 / Yes / No
OS, data storage and transfer
Operating system MS-DOS compatible (DR-DOS)
Data storage Internal memory Approx. 10,000 points with SDR2x format, approx. 8,800 points with SDR33 format.
Memory card drive Equipped as standard for Compact Flash card Type 1 (max. 512MB)
Interface Asynchronous serial RS232-C compatible, Baud rate: 1,200 to 38,400bps
SFX wireless data transfer Provided
Printer output Centronics compatible (with optional DOC46 printer cable)
General
Display / Keyboard Alphanumeric/graphic dot matrix LCD, 20 characters x 8 lines, with backlight, on both faces / Full alphanumeric, 43 keys, on both faces
SF14 wireless keyboard Optional
Laser-pointer function ON (auto off in 5 minutes) / OFF, selectable. (does not work simultaneously with the Guide Light)
Laser radiation indicator Yes None
Guide Light Unit GDL2 Factory option 30" / 2mm
Sensitivity of levels Plate level 20" / 2mm 30" / 2mm*6 20" / 2mm 30" / 2mm*6 30" / 2mm
Circular / Graphic Circular level: 10' /2mm / Graphic LCD level: 3' / outer circle
Optical plummet Magnification 5.5x 3x 5.5x 3x
Tribrach Detachable
Dust and water protection / Operating temperature Conforms to IP64 (IEC 60529) / -20 to +50˚C (-4 to +122˚F)
Instrument height / Size with handle and battery 236mm (9.3in.) from tribrach bottom / W 186 x D 171 x H 345 mm (W 7.3 x D 6.7 x H 13.6 in.)
Weight with handle and battery Approx. 5.9kg (12.9lb.)
Power supply 6V DC
BDC35A detachable battery Ni-MH rechargeable battery, 2 BDC35A are included as standard accessories.
Continuous use per battery About 6 hours (single measurement every 30 seconds)
at 25˚C (77˚F) About 8 hours (angle measurement only)
Recharging time About 70 minutes per battery
BDC57 external Ni-MH battery (optional) About 24.5 hours (single measurement every 30 seconds) About 25.0 hours (single measurement every 30 seconds)
Continuous use at 25˚C (77˚F) About 27.5 hours (angle measurement only) About 28.5 hours (angle measurement only)
Automatic power cut-off / Resume function Auto-off time is selectable from 1 to 99 minutes. / Yes
*1 IEC 60825-1Amd.2: 2001 / FDA CDRH 21 CFR Part1040.10 and 1040.11 (Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No.50, dated July 26, 2001.)
*2 Reflectorless range/accuracy may vary according to measuring objects, observation situations and environmental conditions.
*3 With Kodak Gray Card White Side (90% reflective)
*4 Average conditions: Slight haze, visibility about 20km (12 miles), sunny periods, weak scintillation.
*5 Good conditions: No haze, visibility about 40km (25 miles), overcast, no scintillation.
*6 20" / 2mm plate level is available as a factory option.
■ Standard accessoriess
BDC35A rechargeable Ni-MH batteries (2 pcs.) • CDC39/40/48 quick charger • CP7 tubular
compass • Lens hood • Lens cap • Plumb bob • Tool kit • Wiping cloth • Vinyl cover • Operator’s
manual • Carrying case • Shoulder strap • Laser caution sign board (for Class3R models only)
5
3R
Sokkia is a sponsor
of the
KODAK is a registered trademark of the Eastman KODAK Company.
Sokkia is a trademark of Sokkia Co., Ltd. Product names mentioned in this brochure are trademarks of their respective owners.
International Federation
Designs and specifications are subject to change without notice. Product colors in this brochure may vary slightly from those of the actual products owing to limitations of the printing process. of Surveyors

ISO9001 Certified (JQA-0557)

http://www.sokkia.co.jp/english/
INTERNATIONAL SALES DEPARTMENT
260-63 HASE, ATSUGI, KANAGAWA, 243-0036 JAPAN
PHONE +81-46-248-7984 FAX +81-46-247-1731

A-205-E-6-0510-CH-AB Printed in Japan on 100% recycled paper with ecologically safe soy ink.

© 2005 SOKKIA CO., LTD.