Chisel＆Related product

Public works・Construction
Specialized impact tool maker of JAPAN
General Catalog
OSAKADA TOOL Corp.
URL http://www.osakadatool.co.jp

Company Name / OSAKADA TOOL Corp.

Address / 135-1 Narabarashimo, Mimasaka-shi,
Okayama 707-0024, JAPAN
TEL: +81-868-72-1466
   FAX: +81-868-72-4410
URL: http://www.osakadatool.co.jp/en/

Agent

Specialized impact tool maker of JAPAN

OSAKADA TOOL Corp.

H28.11.500S
 CONTENTS
Please pay special attention to the following points:
1 ~3 HYDRAULIC BREAKER TOOLS

！
4 TCA-7/TCB-130･AA-1.3B/AA-3

To use your chisel as long as possible,

5 CB-20･CB-30
please do the following
6 TPB-40･TPB-73/CB-35･DIG-9
● Inspect your chisel before each use.
7 ELECTRIC HAMMER TOOLS
● Lubricate your chisel properly.

8 AA-0B･NC-0S･AA-00SP･FC-01SA
● Warm up your chisel when it is cold outside.

9 TAPER ROD･BIT for ROCK DRILL ● When you hear a strange sound,
19x22 ADAPTOR/ROCK BUSTER   stop using your chisel immediately.

10 ~1 1 CASE of WARRANTY CLAIMS for INCIDENTS INVOLVING

HYDRAULIC CHISELS

12 IN ORDER TO PREVENT ACCIDENTS

Company Profile
Company Name / OSAKADA TOOL Corp.
！ Safety precautions
Please observe the following when you use the product:
Address / 135-1 Narabarashimo, Mimasaka-shi,
Okayama 707-0024, JAPAN ● Please wear protective safety equipment such as shoes,
TEL: +81-868-72-1466  gloves, a cap and glasses.
   FAX: +81-868-72-4410
URL: http://www.osakadatool.co.jp/en/ ● Please post the safety instructions for the proper use of the
 chisel in a visible place.

● In the case of chisel repair, make sure not to decrease the durability,
 hardness and performance characteristics of the chisel.
Establishment / 1967
"OSAKADA TOOL" is specialized in manufacturing
● When you attach or remove your chisel, make sure that no one gets
high quality breaker chisels. Since our company   hurt or nothing is damaged during the procedure.
was founded in 1967, we have been developing
and producing our products. Our chisels are
integrally manufactured and each process is
strictly controlled from the beginning to the final
processing.
 HYDRAULIC BREAKER TOOLS

POINT STYLE

MOIL POINT-P BLUNT-FE

CHISEL
HARD CORE-PC (CROSS CUT)-FX

■OKADA
DIAMETER OVERALL LENGTH
MODEL NOTE
mm inch mm inch
TOP25/OKB301 50 1.97 500 19.7

OKB-302 61 2.4 550 21.7

TOP30/35/OKB302A 61 2.4 600 23.6

TOP45/OKB303A,B 68 2.7 700 27.6

TOP45B 68 2.7 700 27.6

TOP60/60B/OKB305 74 2.9 900 35.4

OKB-304 74 2.9 700 27.6

OKB-304B 74 2.9 700 27.6

TOP90 98 3.9 925 36.4

TOP100/OKB308 110 4.33 1000 39.4

OKB310 122 4.8 1100 43.3

TOP-200 125 4.9 1200 47.2

OKB-312/312B 130 5.1 1150 45.3

TOP-210/205 135 5.3 1200 47.2

OKB-316 140 5.5 1300 51.2

OKB-318 150 5.9 1400 55.1

TOP-300 155 6.1 1400 55.1

TOP-400 170 6.7 1580 62.2

OKB-324 170 6.7 1600 63

OKB-324A 170 6.7 1600 63

1
 HYDRAULIC BREAKER TOOLS

■TOKU
DIAMETER OVERALL LENGTH
MODEL NOTE
mm inch mm inch
TNB-08 40 1.57 460 18.1

TNB-1M 45 1.77 470 18.5

TNB-2M 50 2.0 500 19.7

TNB-3M 58 2.28 600 23.6

TNB-3MB 58 2.28 600 23.6

TNB-4M 64 2.5 650 25.6

TNB-5M/6M 75 3.0 750 29.5

TNB-6E 95 3.75 800 31.5

TNB-7J 105 4.13 1000 39.4

TNB-100 115 4.5 1100 43.3

TNB-141 135 5.3 1200 47.2

TNB-151 135 5.3 1200 47.2

TNB-190 140 5.5 1200 47.2

TNB-230 146 5.75 1200 47.2

TNB-310 160 6.3 1360 53.5

■NPK
DIAMETER OVERALL LENGTH
MODEL NOTE
mm inch mm inch
GH-06 42 1.65 490 19.3

GH-07 47 1.85 520 20.5

PH1 57 2.24 600 23.6

PH2 66 2.6 650 25.6

PH3 76 2.99 750 29.5

PH4 86 3.39 850 33.5

GH-6 106 4.17 1000 39.4

GH-9 126 4.96 1100 43.3

GH-10 135 5.31 1200 47.2

GH-12 146 5.75 1300 51.2

GH-15 156 6.14 1400 55.1

GH-18 165 6.5 1600 63

2
 HYDRAULIC BREAKER TOOLS

■FURUKAWA
DIAMETER OVERALL LENGTH
MODEL NOTE
mm inch mm inch
FX25 45 1.77 500 19.7

FX35 52 2.05 520 20.5

FX45 60 2.36 570 22.4

FX55 68 2.68 600 23.6

F-6 75 2.95 750 29.5

F-9 90 3.54 850 33.5

F-12 105 4.13 1100 43.3

F-19 119 4.69 1200 47.2

F-22 135 5.31 1250 49.2

F-27 140 5.51 1350 53.1

F-35 150 5.91 1400 55.1

F-45 165 6.5 1500 59.1

FX125 109 4.29 1070 42.1

FX175 115 4.53 1110 43.7

FX275 135 5.31 1310 51.6

FX375 155 6.1 1405 55.3

FX475 170 6.69 1510 59.4

■KONAN
DIAMETER OVERALL LENGTH
MODEL NOTE
mm inch mm inch
MKB-100M 45 1.77 450 17.7

MKB-150M 55 2.17 600 23.6

MKB-300M 70 2.76 750 29.5

MKB-500N 80 3.15 900 35.4

MKB-900N 100 3.94 1000 39.4

MKB-1400V 130 5.12 1200 47.2

MKB-1500V2 135 5.31 1200 47.2

MKB-1700V2 137 5.39 1300 51.2

MKB-2100V 150 5.91 1300 51.2

MKB-2500V 160 6.3 1350 53.1

MKB-3000V 165 6.5 1400 55.1

MKB-4000V 180 7.09 1600 63

3
 CA-7・CB-10

MOIL POINT ASPHALT CUTTER

※WITH SPRING(TCA-7)
80

75
26φ

FLAT CHISEL SPADE CUTTER

80 ※WITH SPRING(TCA-7)

140

26φ 26

COMPATIBLE MODELS
SHANK SIZE (㎜） OVERALL LENGTH（㎜）
TOKU NKS
400 TCA-7
CB-10
450 TCB-130B
R26×80 600
NPK NISSHIN
800
1000 CB-15A CB-10
1200

AA-1.3B・AA-3・AA-75

MOIL POINT（ROUND SHANK） FLAT CHISEL

60

20
17.5φ

MOIL POINT（HEXAGON SHANK） SCALING CHISEL ※WITH SPRING

60 (Please Inform us of the Model Name)

55
・
72
14.7HEX

COMPATIBLE MODELS
SHANK SIZE (㎜） OVERALL LENGTH（㎜）
TOKU NKS NPK
250 AA-1.3B AA-3B NC-1S ∼ NC-4S
AA-10S   AA-15S AA-1SP
R17.5×60 300 TYC-6B AA-20S   AA-30S AA-2SP
350 AA-3SP
NISSHIN
400 AA-75SP
H14.7×60 500 AA-3XSP
AC-2P ∼ AC-4P
600 AA-15XSP

4
 CB-20

MOIL POINT ASPHALT CUTTER

87

75

30φ

FLAT CHISEL WEDGES AND SHIMS（38φ×450・600L）

38φ
30

COMPATIBLE MODELS
SHANK SIZE (㎜） OVERALL LENGTH（㎜）
TOKU NKS

400 TCB-200 CB-20

R30×87 450 NPK NISSHIN

600
CB-20A CB-20

CB-30

MOIL POINT ASPHALT CUTTER

87

75

35φ

FLAT CHISEL WEDGES AND SHIMS（42φ×470・600L）

35 42φ

COMPATIBLE MODELS
SHANK SIZE (㎜） OVERALL LENGTH（㎜）
TOKU NKS

470 TCB-300 CB-30

R35×87 600 NPK NISSHIN

800
CB-30A CB-30

5
 TPB-40
108

25.4HEX

SHANK SIZE (㎜） OVERALL LENGTH（㎜） DIAMETER COMPATIBLE MODELS

25.4H×108 450
（1×4 - 1/4） 30φ TPB-40（TOKU）
600

TPB-73/CB-35
152

31.7HEX

COMPATIBLE MODELS
SHANK SIZE (㎜） OVERALL LENGTH（㎜） DIAMETER
TOKU NKS

TPB-60
31.7H×152 530
36φ TPB-73 CB-35
（1 - 1/4×6） 600
TPB-90

DIG-9
83

22HEX

SHANK SIZE (㎜） OVERALL LENGTH（㎜） DIAMETER COMPATIBLE MODELS

22H×83
435 28φ DIG-9（NPK）
（7/8×3 - 1/4）

6
ELECTRIC HAMMER CHISEL（17・21HEX）

ｈ Ｌ

HEXAGON BODY BULL POINT

ｈ Ｌ

21

FLAT CHISEL
HEXAGON BODY WITH COLLAR（17HEX）
ｈ Ｌ
50

20φ
SCALING CHISEL
ROUND BODY
ｈ Ｌ

150（17HEX）
22φ 120（21HEX）
 （30HEX）
ROUND BODY WITH COLLAR（17HEX）

SCOOP

COMPATIBLE MODELS
SHANK SIZE（h） OVERALL LENGTH（L）
MAKITA HITACHI

DH40SR, PH-40F
HR3530, HM0810
280 H41SA, H45SR
HR3811, HR4030C
 300（WITH COLLAR） PR-25B, DH35
17HEX 8500N, HR3520
450 PR-38E, DH40SA
HR3850, HM0810T
600 DH42, DH45SA
8800N, HM0830
H41SA2, DH38SS

320
H50SA
21HEX 450 HM1201
H55SB
600

ELECTRIC HAMMER CHISEL（30HEX）

COMPATIBLE MODELS
SHANK SIZE（h） OVERALL LENGTH（L）
MAKITA HITACHI

8600S
HM1500 PH65A, PH65SB2
30HEX 410
HM1303 H65SA, H70SA
（ROUND BODY 26φ） 600
HM1304 H65SB
HM1317C

30HEX H90
310 8600N
（ALL HEX BODY） PH-85

7
 AA-0B・NC-0S・AA-00SP
AA-00・FC-01SA

MOIL POINT（ROUND SHANK） FLAT CHISEL

ℓ

MOIL POINT（HEXAGON SHANK） SCALING CHISEL

ℓ ※WITH SPRING

SHANK STYLE SHANK SIZE OVERALL LENGTH（㎜） COMPATIBLE MODELS

H or R × ℓ（㎜）

R15×53ℓ 220 AA-0B（TOKU）

R12.7×47ℓ 200 NC-0S・NC-0・NC-000（NKS）

R11×35ℓ 215 AA-00SP・AA-0SP（NPK）

ROUND SHANK

R12.7×46ℓ 200 AA-00（URYU）

R14×45ℓ 200 FC-01・FC-01SA（FUJI）

H12.7×53ℓ 220 AA-0B（TOKU）

H11×47ℓ 200 NC-0S・NC-0・NC-000（NKS）

H11×35ℓ 215 AA-00SP・AA-0SP（NPK）

HEXAGON SHANK

H10.5×46ℓ 200 AA-00（URYU）

H12×45ℓ 200 FC-01・FC-01SA（FUJI）

※ Please Inform us of the Model Name, When Ordering the SCALING CHISEL ※WITH SPRING

8
 TAPER ROD for ROCK DRILL
L
ℓ

TYPE SHANK SIZE OVERALL LENGTH（L） COMPATIBLE MODELS

H × ℓ（㎜）

22H×83ℓ （M） TJ-15/AV

22HS 0.3, 0.4, 0.5, 0.6, 0.9 TJ-20SBS/AV
（7/8×3-1/4）
1.0, 1.2, 1.5, 1.8, 2.0 TJ-26SBS
22H×108ℓ （TOKU）
22HL 2.1, 2.4, 2.5, 2.7, 3.0
（7/8×4-1/4） 112D（FURUKAWA）

BIT for ROTARY HAMMER & ROCK DRILL

G G
G

CHISEL BLADE BIT（SC） CROSS BLADE BIT（SX）

REAMING BIT SET（SXW）

TYPE G SIZE（㎜） COMPATIBLE TAPER ROD

SC-19 26, 28, 30, 32, 34, 36 19T, 19HS, 19HL

28, 30, 32, 34, 36, 38

SC-22 22HS, 22HL
40, 42, 44, 46, 48

SX-19 26, 28, 30, 32, 34, 36, 38 19T, 19HS, 19HL

28, 30, 32, 34, 36, 38, 40

SX-22 22HS, 22HL
42, 44, 46, 48, 50, 55, 60, 65

SXW-22 60, 65, 70, 80, 90, 100, 120 22HS, 22HL

ADAPTOR for ROTARY HAMMER（19→22）

DESCRIPTION
22 19
Bits for 22 taper rods can be used by 19 taper rods with this
adaptor.

WEDGES AND SHIMS

D SISE（㎜）

D
16, 19, 22, 26, 28, 30, 32, 34, 36, 38

9
 ＜Cases of Warranty Claims for Incidents Involving Hydraulic Breaker Chisels＞
1. Cases subject to coverage by the guarantee

In the case that a fault occurs in the main body of the machinery due to a work related cause within the
time period of one week. ↑ shows the point of breaking

！ Even in the case of a surface fracture that occurs within one week,
the warrantee may not be applicable
！ The warranty is not valid after one week.

2. We are not liable for the following cases

① Break in the Middle of the Tool Body

Graduated breaks in the middle of the body of the machinery or breaks slanted horizontally occur
due to the application of excessive force.

10
② Chipping
Repetitious blank firing or the use of round bush or chisel holder bush in a state of friction.

③ Breaks or chipping that occurs after the length of wearing reaches: 50mm or more for the Moyle point (P)
 and the flat chisel (FX), and 30mm or more for the blunt (FE)

④ Chisels that have been modified or repaired by quenching and welding

⑤ Chisel Tip Wear or Abnormal Friction

The wearing or abnormal friction due to the use of chisel against a very hard material or a long
continuous use against the same area.

11
 Points to be Aware of Regarding the Use of Our Chisel

Our chisels have been designed to withstand impact, friction and bending using materials
developed jointly with steel companies. In addition, based on many years of experience, we produce
products, made from the finest materials and are subjected to a careful heat-treatment and
hardness test.
Though we have the utmost confidence in the reliability and durability of our chisel, accidents may
occur under the following conditions.

In order to prevent accidents

Use Properly

Apply For Vertical

Start From The Edge

Avoid Continuous Strikes

To a Solid Object
※ If the target objec t does not crack in 30 Do Not Hung Avoid Sudden Deep Impact
seconds to 1 minute, please change the
position of the chisel.

Stop The Hammer Immediately, Avoid Levering The Tool or Slamming It

When The Material is Broken To Move a Large Rock

12