(SLURF
Fluids and Lubricating Greases
Surface Drilling
PM No. 9853 3221 01F
201-
Epiroc Parts.
© Copyright 2018, Epiroc Rock Drills AB, Sweden
All product names used in these publications are trademarks of Epiroc and so are the property
of Epiroc Any unauthorized use or copying of the contents or any part thereof is prohibited.
Illustrations and photographs may show equipment with ancillary equipment. Specifications and other
details are supplied without liability. Specifications and equipment are subject to change without
notice. Please consult the Epiroc Customer Center for specific information.
Translation of Original Instructions
Epiroc Rock Drills AB
SE-70191 Örebr o, Sweden
Contents
1 Lubricating Oils, Lubricating Greases and Coolants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Temperature Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 Surface Drill Rigs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3.1 Lubricating Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3.2 Lubricating Greases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.3.3 Coolants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.3.4 Contact Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2 Propellants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2 Diesel Fuel and Low Temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.3 Diesel Engines - Including Stage III. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.4 Stage III B Diesel Engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1
2
Fluids and Lubricating Greases
1 Lubricating Oils, Lubricating Greases and Coolants
1 Lubricating Oils, Lubricating Greases
and Coolants
1.1 Introduction
Epiroc fluids (oils, greases and coolants) are specifically made for Epiroc
equipment. Using these products creates optimal machine condition and minimizes
breakdowns. Correct grade selection of lubricating oils, lubricating greases and cool-
ants improves and extends the efficiency and service life of vehicle components.
In addition to these product recommendations, the following apply:
• Never mix lubricating oils, lubricating greases or coolants of a different type or
grade.
• Dispose of surplus oil in an environmentally-friendly manner, as recommended
by proper environmental authorities.
• If in doubt, contact your local Epiroc representative.
1.2 Temperature Zones
All fluids pertain to an intended temperature zone. The figure below displays three
different temperature zones and their respective temperature range.
1250 0309 83
Figure 1 Temperature Zones
Temperature Zone Temperature Range [°C] Temperature Range [°F]
Arctic -30 to 0 -22 to 32
Normal -10 to 30 14 to 86
Tropical 20 to 60 68 to 140
3
Fluids and Lubricating Greases
1 Lubricating Oils, Lubricating Greases and Coolants
1.3 Surface Drill Rigs
1.3.1 Lubricating Oils
FlexiROC
Product FlexiROC
FlexiROC T15 R
FlexiROC T20 R
FlexiROC T30 R
FlexiROC T35 R
FlexiROC T40 R
FlexiROC C50
FlexiROC C65
FlexiROC D50
FlexiROC D55
FlexiROC D60
FlexiROC D65
FlexiROC T45
FlexiROC T35
FlexiROC T40
FlexiROC T50
Engine Engine 100/200
Traction Gear Traction Gear 100
Compressor PAROIL M / S/ S xtreme PAROIL S / S xtreme
Rock Drill/ Rock Drill 100 / COP OIL N/A
DTH Hammer
Hydraulic Hydraulic 100, 120, 200, 220, 300
Coolant Coolant 150
Engine Engine 100 / 200
4
Fluids and Lubricating Greases
1 Lubricating Oils, Lubricating Greases and Coolants
D-series and SmartROC
Product D-series SmartROC
ROC F9TH-20 LM
SmartROC T40D
ROC F9C TH-10
ROC F9C TH-11
SmartROC C50
SmartROC D65
SmartROC T45
SmartROC T35
ROC F9TH-10
SmartROC CL
ROC F9TH-11
ROC F6DTH
ROC D3-01
ROC D5-11
Engine Engine 100/200
Traction Gear Traction Gear 100
Compressor PAROIL M / S / S xtreme PAROIL M / S xtreme
Rock Drill/ Rock Drill 100, COP OIL N/A Rock Drill N/A
DTH Hammer 100, COP
OIL
Hydraulic Hydraulic 100, 120, 200, 220, 300
Coolant Coolant 150
Engine Engine 100, 200
5
Fluids and Lubricating Greases
1 Lubricating Oils, Lubricating Greases and Coolants
1.3.2 Lubricating Greases
Note
Most components of the machine are lubricated with Grease 100/110. However,
there are some components that require special grease in accordance with the spec-
ifications below.
FlexiROC T15 R, FlexiROC T20 R, FlexiROC T30 R, FlexiROC T35 R, FlexiROC T50,
FlexiROC T35, FlexiROC T40 R, FlexiROC T40, FlexiROC C50, FlexiROC C65
SmartROC T35, SmartROC T40, SmartROC T45, SmartROC C50 and SmartROC CL
Component Specification
General Grease Grease 100/110
Rock Drill COP Grease
Spray Grease Grease 110
FlexiROC D50, FlexiROC D55, FlexiROC D60, FlexiROC D65,
ROC F6DTH and SmartROC D65
Component Specification
General Grease Grease 100/110
Rotation Unit N/A
Spray Grease Grease 110
ROC D3-01, ROC D5-01, ROC F9TH-10, ROC F9TH-11, ROC F9TH-20 LM,
ROC F9C TH-10 and ROC F9C TH-11
Component Specification
General Grease Grease 100/110
Rock Drill COP Grease
Spray Grease Grease 110
1.3.3 Coolants
Component Coolants
Cooling System, Diesel Engine Coolant 150
Air Conditioning R134a
6
Fluids and Lubricating Greases
1 Lubricating Oils, Lubricating Greases and Coolants
1.3.4 Contact Grease
Component Specification
Electrical contacts Contact grease fortified with a high level of rust, corro-
• Contact grease should not be used on sealed water- sion and oxidation inhibitors
tight connectors NLGI Number: 1-2
• Contact grease may be used sparingly on sealed Drop Point: 200 ºC
non-watertight connectors Operating Temperature: -40 to 130 ºC
• Contact grease should be used on open connectors
7
Fluids and Lubricating Greases
1 Lubricating Oils, Lubricating Greases and Coolants
8
Fluids and Lubricating Greases
2 Propellants
2 Propellants
2.1 Introduction
This chapter contains recommendations regarding the fuel used with (SLURF
equipment. Fuel quality is a major factor determining engine performance, engine
life, and acceptable exhaust emission levels.
In addition to these fuel recommendations, the following apply:
• Dispose of surplus fuel in an environmentally-friendly manner, as recommended
by proper environmental authorities.
• If in doubt, contact your local (SLURFrepresentative.
2.2 Diesel Fuel and Low Temperatures
At low temperatures, paraffin deposits in diesel can cause blockages, resulting in dis-
turbances in the fuel system. A special winter diesel should therefore be used in
ambient temperatures below 0 ºC.
2.3 Diesel Engines - Including Stage III
(SLURFdiesel engines, up to and including Stage III, must be driven on com-
mercial diesel fuel, containing a sulphur content less than 0.5%. A higher sulphur
content will result in shorter oil-change intervals.
Diesel fuel should be used when using one of the following specifications:
DIN 51 601
BS 2869: A1 and A2
ASTM D 975-88; 1-D and 2-D
CEN EN 590 or DIN EN 590
NATO Code F-54 and F-75
9
Fluids and Lubricating Greases
2 Propellants
2.4 Stage III B and Stage 4 Diesel Engines
(SLURFStage III B diesel engines must be driven on commercial diesel fuel
containing a sulphur content less than 15 ppm. A higher sulphur content damages
the engine and the particle filter.
Diesel fuel should be used when using one of the following specifications:
EN 590 (max. 5% biodiesel)
DIN 51628 (max. 7% biodiesel)
ASTM: D 975 1-D and 2-D
JIS K 2204 Grade 1 and Grade 2
NATO F-54 in accordance with EN 590
10
www.epiroc.com
