NON-INCENDIVE

Pressure Transducer / Transmitter

AST4300
Overview
The AST4300 is a stainless-steel pressure transducer / transmitter for
use in hazardous areas. In addition to its rugged construction and best
price-to-performance ratio in the industry, the AST4300 is the solution
for pressure measurement for a variety of applications.

Benefits
 Class I Div 2 Groups A, B, C, D*
 ATEX / IECEx: Ex ec IIC T4 Gc (Ta = -40°C to 85°C)**
 Class I Zone 2, AEx nA IIC, T4**
 High Strength Stainless Steel Construction
 No Oil, Welds or Internal O-rings
 Wide Operating Temperature
 Pressures from Vacuum to 20,000 PSI
 Low Static and Thermal Errors
 Unparalleled Price and Performance
 Compatible with Wide Variety of Liquids and Gases
 EMI/RFI Protection

Applications
 Refrigeration
 Water Management
 Industrial OEM Equipment
 Oil & Gas Platforms
 Pressure Instrumentation
 Process Control
 Gas Compression & Storage

*For DIN43650A and Turck Mini-Fast connectors (suffix  Test Stands

I and 4 in 16th position of model code.)  Oxygen Delivery Systems
 Hydrogen Fuel (316L)
**For metal conduit connector (suffix “L,” “M,” “N,” and
“P” in 16th position of model code.)

SENSOR SOLUTIONS /// AST4300 (REV C) 11/2019 Page 1

INDUSTRIAL OEM
AST4300 Pressure Transmitter

Environmental Data

Ambient Temperature: 25°C (77°F) (Unless otherwise specified)

Operating Ambient -40 to 80°C (-40 to 176°F)

Storage -40 to 100°C (-40 to 212°F)

Electromagnetic Compatibility (EMC)

Standard Description Test Value

EN55011 Radiated Emissions Class A, 30-1000 MHz
EN61000-4-2 Electrostatic Discharge Immunity ±8 kV Air Discharge
±4 kV Contact Discharge, VCP, HCP
EN61000-4-3 Radiated Electromagnetic Field 10V/m, 80-2700 MHz 80% 1kHz AM Modulation
Immunity
EN61000-4-4 Electrical Fast Transient/Burst ±0.5 kV, ±1 kV, ±2 kV on DC Mains
Immunity
±0.5 kV, ±1 kV on I/O Ports
EN61000-4-5 Surge Immunity ±0.5 kV,±1 kV, on I/O Ports & DC Lines
EN61000-4-6 Conducted immunity 10V rms, 0.15-80 MHz, DC Mains
10V rms, 0.15-80 MHz, I/O Ports
80% 1kHz AM Modulation
EN61000-4-8 Power Frequency Magnetic Field 30 A/m @ (50Hz, 60Hz) 3 orthogonal orientations
Immunity Test

Shock, Vibration & Ingress Protection (IP)

Standard Description Test Value
EN 60067-2-27 Shock Test 500m/s2, 6ms, half sine-wave, 6 shocks (3/direction),
horizontal and vertical axis, 12 total shocks

EN 60068-2-6 Sinusoidal Vibration 5-25 Hz, 2mm, 25-150 Hz, 50m/s, Sweep rate: 1
octave/min, Duration: 24 hours/axis (48 hours total),
horizontal and vertical axis
EN 60068-2-64 Random Vibration 10-2000 Hz, vibration level: 0.0314 (m/s2)2/Hz, 24
hrs/axis (48 hrs total), 2 directions: horizontal and
vertical
IEC 60068-2-32 Drop Test Drop of 1 meter to floor made of concrete. Dropped
twice on the threaded end and two times perpendicular
to the threaded end.
IP-66 Ingress Protection Dust-tight, protected against powerful water jets

SENSOR SOLUTIONS /// AST4300 (REV C) 11/2019 Page 2

INDUSTRIAL OEM
AST4300 Pressure Transmitter

Performance
Ambient Temperature: 25°C (77°F) (Unless otherwise specified)

Parameters MIN TYP MAX UNITS NOTES

Accuracy -0.25 +0.25 %Span 1

Zero Error -1.0 +1.0 %Span 2

Span Error -2.0 +2.0 %Span 3

Thermal Error, Zero -1.5 +1.5 %Span 4

Thermal Error, Span -1.5 +1.5 %Span 5

Stability (1 year) ±0.25 %Span

Proof Pressure 2X Rated Pressure %Span 6

Burst Pressure 5X Rated Pressure or PSI 7

40,000 (whichever is less)
Pressure Cycles 10 Million PSI

Compensated Temp. Range 0 - 55° (32 to 132°) °C (°F)

Electrical Data

Model AST4300
Output 4-20mA 1-5V, 1-6V 0.5-4.5V Ratiometric
Excitation 10-28VDC 10-28VDC 5.0 ± 0.5VDC
Output Impedance > 10k Ω < 100 Ω < 100 Ω
Current Consumption - <10mA <10mA
Output Noise - <2mV RMS <2mV RMS
Output Load 0-800Ω 10k Ω Min. 10k Ω Min.
Reverse Polarity Protection Yes Yes Yes
Bandwidth DC-250 Hz DC-1kHz DC-1kHz

Notes
1. The maximum deviation from a best fit straight line (BFSL) fitted to the output measured over the pressure range at 25°C. Includes all errors due to pressure
non-linearity, hysteresis, and non-repeatability. Span is the algebraic difference between full scale output and zero pressure offset.
2. The maximum variation from the ideal offset measured at 25°C.
3. The maximum variation from the ideal full-scale span measured at 25°C.
4. The maximum variation of offset within the compensated temperature range relative to 25°C.
5. The maximum variation of full-scale span within the compensated temperature range relative to 25°C.
6. The maximum pressure that can be safely applied to the product tor it to remain in specification once pressure is returned to the operating pressure range.
7. The maximum pressure that can be applied without causing escape of the pressure media.

SENSOR SOLUTIONS /// AST4300 (REV C) 11/2019 Page 3

INDUSTRIAL OEM
AST4300 Pressure Transmitter

Dimensions & Electrical Connection

Unless otherwise specified, all dimensions are in inches

EC + SH + PC = Total Nominal Product Length

EC = Electrical Connector
SH = Sensor Housing
PC = Process Connection
V= Voltage Supply
N/C= Not Connected
WP= Wide Pin
S= Signal

Electrical Connectors Option Codes

Conduit Cable
L M N P
2ft (0.6m) 4ft (1.2m) 6ft (1.8m) 10ft (3m)

3 Wire
Color 4-20mA
Voltage
Green N/C N/C

Green
Case Case
(-SS only)

Black GND -V

Red +V +V

White S N/C

I 4
DIN 43650A 18.0mm Mini-Fast
(Big- DIN) (-SS Only)

3 Wire 3 Wire
Pin 4-20mA Pin 4-20mA
Voltage Voltage
1 +V +V 1 GND -V
2 GND -V 2 S N/C
3 S N/C 3 +V +V
WP N/C N/C 4 Case Case
WP
Case Case
(-SS Only)

SENSOR SOLUTIONS /// AST4300 (REV C) 11/2019 Page 4

INDUSTRIAL OEM
AST4300 Pressure Transmitter

Pressure Port Option Codes

A B C I
1/4 NPT Male 1/8 NPT Male 1/4 BSPP Male 1/4 NPT Female

P W
1/2 NPT Male F250C Female Autoclave

SENSOR SOLUTIONS /// AST4300 (REV C) 11/2019 Page 5

 Legend
INDUSTRIAL OEM  Standard Available
AST4300 Pressure Transmitter X Not Available

Available Process Connection, Material Configurations & Pressure Codes

17-4PH PSI
Pressure Range Process Connection Code
Pressure Range PSI Unit
Code A B C I P W
-14.7 - 25 V0025 P  X    X
-14.7 - 50 V0050 P      X
-14.7 - 100 V0100 P      X
-14.7 - 150 V0150 P      X
-14.7 - 200 V0200 P      X
-14.7 - 250 V0250 P      X
-14.7 - 500 V0500 P      X
0 - 25 00025 P  X    X
0 - 50 00050 P      X
0 - 100 00100 P      X
0 - 150 00150 P      X
0 - 200 00200 P      X
0 - 250 00250 P      X
0 - 500 00500 P      X
0 - 1,000 01000 P      X
0 - 2,500 02500 P      X
0 - 5,000 05000 P      X
0 - 7,500 07500 P X X    X
0 - 10,000 10000 P X X X X X 

17-4PH Bar
Pressure Range BAR Process Connection Code
Pressure Range
Code Unit A B C I P W
-1 to 2 V0002 B      X
-1 to 5 V0005 B      X
-1 to 7 V0007 B      X
-1 to 10 V0010 B      X
-1 to 20 V0020 B      X
0-2 00002 B      X
0-5 00005 B      X
0-7 00007 B      X
0-10 00010 B      X
0-20 00020 B      X
0-35 00035 B      X
0-50 00050 B      X
0-100 00100 B      X
0-250 00250 B      X
0-350 00350 B      X
0-500 00500 B      X
0-700 00700 B      X

SENSOR SOLUTIONS /// AST4300 (REV C) 11/2019 Page 6

INDUSTRIAL OEM
AST4300 Pressure Transmitter

316L PSI
Pressure Range Process Connection Code
Pressure Range PSI Unit
Code A B C I P W
-14.7 - 25 V0025 P  X    X
-14.7 - 50 V0050 P  X    X
-14.7 - 100 V0100 P  X    X
-14.7 - 150 V0150 P  X    X
-14.7 - 200 V0200 P  X    X
-14.7 - 250 V0250 P  X    X
-14.7 - 500 V0500 P  X    X
0 - 25 00025 P  X    X
0 - 50 00050 P  X    X
0 - 100 00100 P  X    X
0 - 150 00150 P  X    X
0 - 200 00200 P  X    X
0 - 250 00250 P  X    X
0 - 500 00500 P  X    X
0 - 1,000 01000 P  X    X
0 - 2,500 02500 P  X    X
0 - 5,000 05000 P  X    X
0 - 7,500 07500 P  X    X
0 - 10,000 10000 P  X    X
0 - 15,000 15000 P X X X  X X
0 - 20,000 20000 P X X X X X 

316L Bar
Pressure Range BAR Process Connection Code
Pressure Range
Code Unit A B C I P W
-1 to 2 V0002 B  X    X
-1 to 5 V0005 B  X    X
-1 to 7 V0007 B  X    X
-1 to 10 V0010 B  X    X
-1 to 20 V0020 B  X    X
0-2 00002 B  X    X
0-5 00005 B  X    X
0-7 00007 B  X    X
0-10 00010 B  X    X
0-20 00020 B  X    X
0-35 00035 B  X    X
0-50 00050 B  X    X
0-100 00100 B  X    X
0-250 00250 B  X    X
0-350 00350 B  X    X
0-500 00500 B  X    X
0-700 00700 B  X    X

SENSOR SOLUTIONS /// AST4300 (REV C) 11/2019 Page 7

INDUSTRIAL OEM
AST4300 Pressure Transmitter

Inconel PSI
Pressure Range Process Connection Code
Pressure Range PSI Unit
Code A B C I P W
-14.7 - 25 V0025 P  X X X  X
-14.7 - 50 V0050 P  X X X  X
-14.7 - 100 V0100 P  X X X  X
-14.7 - 150 V0150 P  X X X  X
-14.7 - 200 V0200 P  X X X  X
-14.7 - 250 V0250 P  X X X  X
-14.7 - 500 V0500 P  X X X  X
0 - 25 00025 P  X X X  X
0 - 50 00050 P  X X X  X
0 - 100 00100 P  X X X  X
0 - 150 00150 P  X X X  X
0 - 200 00200 P  X X X  X
0 - 250 00250 P  X X X  X
0 - 500 00500 P  X X X  X
0 - 1,000 01000 P  X X X  X
0 - 2,500 02500 P  X X X  X
0 - 5,000 05000 P  X X X  X
0 - 7,500 07500 P  X X X  X
0 - 10,000 10000 P  X X X  X
0 - 15,000 15000 P X X X   X
0 - 20,000 20000 P X X X X X 

Inconel Bar
Pressure Range BAR Process Connection Code
Pressure Range
Code Unit A B C I P W
-1 to 2 V0002 B  X X X  X
-1 to 5 V0005 B  X X X  X
-1 to 7 V0007 B  X X X  X
-1 to 10 V0010 B  X X X  X
-1 to 20 V0020 B  X X X  X
0-2 00002 B  X X X  X
0-5 00005 B  X X X  X
0-7 00007 B  X X X  X
0-10 00010 B  X X X  X
0-20 00020 B  X X X  X
0-35 00035 B  X X X  X
0-50 00050 B  X X X  X
0-100 00100 B  X X X  X
0-250 00250 B  X X X  X
0-350 00350 B  X X X  X
0-500 00500 B  X X X  X
0-700 00700 B  X X X  X

SENSOR SOLUTIONS /// AST4300 (REV C) 11/2019 Page 8

INDUSTRIAL OEM
AST4300 Pressure Transmitter

Hastelloy PSI
Pressure Range Process Connection Code
Pressure Range PSI Unit
Code A B C I P W
-14.7 - 25 V0025 P  X  X  X
-14.7 - 50 V0050 P  X  X  X
-14.7 - 100 V0100 P  X  X  X
-14.7 - 150 V0150 P  X  X  X
-14.7 - 200 V0200 P  X  X  X
-14.7 - 250 V0250 P  X  X  X
-14.7 - 500 V0500 P  X  X  X
0 - 25 00025 P  X  X  X
0 - 50 00050 P  X  X  X
0 - 100 00100 P  X  X  X
0 - 150 00150 P  X  X  X
0 - 200 00200 P  X  X  X
0 - 250 00250 P  X  X  X
0 - 500 00500 P  X  X  X
0 - 1,000 01000 P  X  X  X
0 - 2,500 02500 P  X  X  X
0 - 5,000 05000 P  X  X  X
0 - 7,500 07500 P  X  X  X
0 - 10,000 10000 P  X  X  X
0 - 15,000 15000 P X X  X  X

Hastelloy Bar
Pressure Range BAR Process Connection Code
Pressure Range
Code Unit A B C I P W
-1 to 2 V0002 B  X  X  X
-1 to 5 V0005 B  X  X  X
-1 to 7 V0007 B  X  X  X
-1 to 10 V0010 B  X  X  X
-1 to 20 V0020 B  X  X  X
0-2 00002 B  X  X  X
0-5 00005 B  X  X  X
0-7 00007 B  X  X  X
0-10 00010 B  X  X  X
0-20 00020 B  X  X  X
0-35 00035 B  X  X  X
0-50 00050 B  X  X  X
0-100 00100 B  X  X  X
0-250 00250 B  X  X  X
0-350 00350 B  X  X  X
0-500 00500 B  X  X  X
0-700 00700 B  X  X  X
*See Ordering Information for list of options.

SENSOR SOLUTIONS /// AST4300 (REV C) 11/2019 Page 9

INDUSTRIAL OEM
AST4300 Pressure Transmitter

Ordering Information

AST4300 A 00500 P 4 L 1 000 -SS

Process Connection
A= 1/4” NPT Male
B= 1/8” NPT Male
C= 1/4” BSPP Male
I= 1/4” NPT Female
P= 1/2” NPT Male
W= F250C Female Autoclave

Pressure Range
Insert Pressure Range Code (see table for availability)
Pressure Unit
B= Bar P= PSI

Output
1= 0.5-4.5V ratiometric 4= 4-20mA (2 wire loop powered)
3= 1-5V 6= 1-6V

Electrical
I= DIN 43650A
L= Conduit fitting, Cable 2 ft. (0.6 m)
M= Conduit fitting, Cable 4 ft. (1.2 m)
N= Conduit fitting, Cable 6 ft. (1.8 m)
P= Conduit fitting, Cable 10 ft. (3.0 m)
4 = Mini-Fast (-SS only)

Wetted Material
0= 17-4PH 1= 316L 2= Inconel 718 4= Hastelloy C276

Options
000= No Options

Approval Type
CSA213 Class I Div 2 Non-Incendive Groups A, B, C, D
(For Electricial Connection options I and 4 only)

CSA213 Class I Div 2 Non-Incendive Groups A, B, C, D

-SS
Class 1 Zone 2, Aex na IIC T4
(For Electrical Connection options L, M, N and P only)

All configurations are ANSI/ISA 12.27.01 Single Seal Approved

CRN Registered to ANSI/ASME B31.3. Contact factory for material,
-Z
pressure, and process connection options (includes -SS approvals)
UL ANSI/ISA 12.12.01 Class I Div 2 Non-Incendive Groups A, B, C, D
Left (formerly UL1604)
Blank
Not available for Electrical Connection 4

Note: CSA approved products require case/earth ground electrical connection. See wiring installation sheet for further details

NORTH AMERICA ASIA

American Sensor Technologies, Inc. (AST), Hong Kong Sensor Technologies (HKST),
a TE Connectivity Company a TE Connectivity Company
Tel: 800-522-6752 Tel: 0400-820-6015
Email: [email protected] Email: [email protected]

TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.

SENSOR SOLUTIONS /// AST4300 (REV C) 11/2019 Page 10