Scribd
Upload
73 views

Patient Health Monitoring System Using Android Smart Phone.

The document describes a patient health monitoring system using an Android smartphone. Biomedical sensors like temperature, pulse rate, and MEMS sensors are attached to a patient and connected to a microcontroller. The microcontroller collects data from the sensors, displays it on an LCD screen, and sends it to an Android phone via Bluetooth. If abnormal conditions are detected, the microcontroller triggers an alarm using a buzzer. The system allows for automatic and wireless patient monitoring from anywhere via a smartphone.

Uploaded by

dileeppatra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
73 views

Patient Health Monitoring System Using Android Smart Phone.

The document describes a patient health monitoring system using an Android smartphone. Biomedical sensors like temperature, pulse rate, and MEMS sensors are attached to a patient and connected to a microcontroller. The microcontroller collects data from the sensors, displays it on an LCD screen, and sends it to an Android phone via Bluetooth. If abnormal conditions are detected, the microcontroller triggers an alarm using a buzzer. The system allows for automatic and wireless patient monitoring from anywhere via a smartphone.

Uploaded by

dileeppatra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

PATIENT HEALTH MONITORING SYSTEM USING ANDROID SMART PHONE

Abstract:

The main aim of the project is to design a system which is used to monitor the patient
condition using ANDROID application. In this project biomedical sensors like temperature,
pulse rate and MEMS attached to the person and also connected to the microcontroller. Here
the microcontroller collects the information from the sensors and displayed on the lcd screen
and also sends the information to ANDROID mobile using Bluetooth. If any abnormal
conditions are detected then the microcontroller triggers the alarm system using buzzer.

Existing system:

Very often there are a lot of people who have to be monitored are left alone. These people
include elderly ones and patients. This can be in a hospital or in an old age home or even at
homes. In a busy world keeping track of them is very difficult unless we have a device that
can keep track of the patients and inform the persons if there are any abnormal parameter
changes. Further the device has to be so user friendly and it should be attachable to the
patients without any wired connections and it should go with them wherever they move.

Proposed system:

In these project, we are using temperature, heart beat sensor, MEMS sensor, LCD , Buzzer,
Bluetooth and microcontroller. Whenever sensor sense gives the information to the micro
controller and with help of Bluetooth technology the data is sent to the doctor.
Block Diagram:

POWER SUPPLY LCD DISPLAY


(16 X 2 LINES)
MICRO
CONTROLLER

SENSORS BUZZER
(TEMPERATURE,
PULSE, MEMS)

BLUETOOTH
MODULE

Regulated power supply:

Step Down Bridge Filter Regulator


section
Transformer Rectifier Circuit

Hardware specifications:

1. Microcontroller
2. Regulated Power Supply.
3. Temperature sensor
4. Pulse sensor(Heart beat sensor)
5. MEMS sensor
6. LCD display
7. Buzzer
8. Bluetooth
Software’s used:

1. ARDUINO IDE for Embedded C programming.


2. ARDUINO IDE for dumping code into Micro controller.
3. Express SCH for Circuit design.

Advantages:

1. Automatic patient data monitoring.


2. Bluetooth based communication.
3. Life status display on LED.

Applications:

1. To transfer the information from transmitter side to the receiver side.

2. Monitoring the heart beat and temperature continuously.

3. Vehicle Security Applications.

4. Ambulance tracking.

You might also like