CD home

Ermeto Original
Valves
CD home

Valves

Visual index Non return valves

RHD / p. O11

EO 24° cone end / EO 24° cone end

RHV-R-ED / p. O12 RHZ-R-ED / p. O13

EO 24° cone end / Male BSPP thread – ED-seal (ISO 1179) /

Male BSPP thread – ED-seal (ISO 1179) EO 24° cone end
RHV-M-ED / p. O14 RHZ-M-ED / p. O15

EO 24° cone end / Male metric thread – ED-seal (ISO 9974) /

Male metric thread – ED-seal (ISO 9974) EO 24° cone end
RHDI / p. O16

Female BSPP thread (ISO 1179-1) /

Female BSPP thread (ISO 1179-1)
RVP / p. O17

Non return valve cartridge

I-TL / p. O18

Internal parts of non return valve

O2 Catalogue 4100-5/UK
CD home

Valves

Visual index Non return valves with O-Lok ® connections

RHDMLOS / p. O20

O-Lok® ORFS end / O-Lok® ORFS end

RHV42EDMLOS / p. O21 RHZ42EDMLOS / p. O22

Male BSPP thread – ED-seal (ISO 1179) / O-Lok® ORFS end /

O-Lok® ORFS end Male BSPP thread – ED-seal (ISO 1179)
RHV50MLOS / p. O23 RHZ50MLOS / p. O24

Male UN/UNF thread – O-ring (ISO 11926) / O-Lok® ORFS end /

O-Lok® ORFS end Male UN/UNF thread – O-ring (ISO 11926)
RHV82EDMLOS / p. O25 RHZ82EDMLOS / p. O26

Male metric thread – ED-seal (ISO 9974) / O-Lok® ORFS end /

O-Lok® ORFS end Male metric thread – ED-seal (ISO 9974)

O3 Catalogue 4100-5/UK
CD home

Valves

Visual index Non return valves with Triple-Lok ® connections

RHDMTXS / p. O27

Triple-Lok® 37° flare end / Triple-Lok® 37° flare end

RHV42EDMXS / p. O28 RHZ42EDMXS / p. O29

Male BSPP thread – ED-seal (ISO 1179) / Triple-Lok® 37° flare end /
Triple-Lok® 37° flare end Male BSPP thread – ED-seal (ISO 1179)
RHV50MXS / p. O30 RHZ50MXS / p. O31

Male UN/UNF thread – O-ring (ISO 11926) / Triple-Lok® 37° flare end /
Triple-Lok® 37° flare end Male UN/UNF thread – O-ring (ISO 11926)
RHV82EDMXS / p. O32 RHZ82EDMXS / p. O33

Male metric thread – ED-seal (ISO 9974) / Triple-Lok® 37° flare end /
Triple-Lok® 37° flare end Male metric thread – ED-seal (ISO 9974)

O4 Catalogue 4100-5/UK
CD home

Valves

Visual index shut off valves and ball valves

DV LD
p. O34 p. O35

EO 24° cone end / EO 24° cone end EO 24° cone end / EO 24° cone end
WV ELA/ELAE
p. O36 p. O46

EO 24° cone end / EO 24° cone end / EO 24° cone end Air-bleed valves
KH (S) KH (71)
p. O37 p. O38

EO 24° cone end / EO 24° cone end EO 24° cone end / EO 24° cone end
KH-BSPP (S) KH-BSPP (71)
p. O39 p. O40

Female BSPP thread (ISO 1179-1) / Female BSPP thread (ISO 1179-1) /
Female BSPP thread (ISO 1179-1) Female BSPP thread (ISO 1179-1)
KH-NPT (S) KH-NPT (71)
p. O41 p. O42

Female NPT thread (SAE 476) /

Female NPT thread (SAE 476)
Female NPT thread (SAE 476) /
Female NPT thread (SAE 476) O
KH 3/2 (S)
p. O43

EO 24° cone end / EO 24° cone end / EO 24° cone end

KH 3/2-BSPP(S)
p. O44

Female BSPP thread (ISO 1179-1) / Female BSPP thread (ISO 1179-1) / Female BSPP thread (ISO 1179-1)

O5 Catalogue 4100-5/UK
CD home

Valves

Range of non return valves and al- Range of hand-operated shut off
ternating valves valves and quarter turn ball valves
Non-return valves with nominal pressure Quarter turn Hand-operated ball valves:
ratings up to PN 420 bar: – for high pressure ratings
– with tube connection both ends: RHD up to PN 500 bar KH

– with tube connection – leakage rate hydraulic testing under test pressure:
to male stud: RHV/RHZ 0 drops per minute

– with female thread both ends: RHDI

The pressure specification PN for hand-operated shut-off
– valve cartridges: RVP valves and quarter turn ball valves applies to the design
– valve internal parts: I-TL factor 1,5 (according DIN 3230 T5 and ISO 5208).

– leakage rate hydraulic testing under test pressure: Steel

1 drop per minute
Materials:
Body made of steel, coating DIN 50938-FE//A/T4, ball of
Alternating valves: hard chrome plated carbon steel, stem of zinc plated steel.
– for nominal pressure ratings
Seals:
up to PN 160 WV
Ball seat of POM (e. g. Delrin), stem seal of NBR (e. g. Per-
– leakage rate hydraulic testing under test pressure: bunan).
20 drops per minute
Applications:
Suitable for petroleum-based hydraulic fluid, lubricants and
Hand-operated Shut-off valves: fuel oil.
– for low pressure ratings For applications suitable up to 100 bar.
up to PN 10 bar DV
Temperature range:
– for medium pressure ratings –10 up to +100 °C.
up to PN 40 bar LD

Design: Stainless Steel

1. For materials, permissible working pressures, temper- Materials:
atures, flow medium torques for male studs etc. see rel- Body made of stainless steel, ball of stainless steel, stem
evant pages of the catalogue. and connectors of stainless steel.
2. Tube connection ends must be assembled according to
the Parker EO/EO 2 assembly instructions. Seals:
The valve bodies must be held rigidly during assembly Ball seat of POM (e. g. Delrin), stem seal of NBR (e. g. Per-
of the tube connection ends. bunan), DOZ from function nut FPM (e. g. Viton).
3. Test pressures for non return valves:
PN in conformance with O.D. information see chapter C. Applications:
4. Pressure drop values please see p. C12 and diagrams. Suitable for petroleum-based hydraulic fluid, lubricants and
fuel oil.
For applications suitable up to 100 bar.
Caution!
Please note the admissible pressure ratings for the EO- Temperature range:
tube ends. –30 up to +100 °C.

Notes:
To assess the suitability of valves for specific applications, please advise us of the exact specification of the medium to
be used, max. working pressure incl. pressure peaks, temperature and frequency of valve operations. If water is used,
indicate type of water or additives, if any.

O6 Catalogue 4100-5/UK
CD home

Valves

RHD/V/Z non return valve

DN
5 4 3 2 1 6

1: poppet
2: sealing disc
3: cover disc
4: spring
5: passage disc
6: Eolastic-sealing
DN = Nominal diameter (mm)

RHD RHV RHZ

Characteristics: ● Stainless steel valves have FKM (e.g. Viton*) as

standard.
Poppet check valve with a 90° valve seat with an elas- (Up to 3 bar cracking pressure)
tomere sealing disc. Poppet stop for controlled valve open- ● Brass-valves (CuZn35Ni2 2.0540) with internals
ing. Damped opening action to minimize shock and noise.
No reduction of cross section. Maximum flow velocity not
more than 8 m/sec (for higher flow velocities special tests
(1.4571) available on request.
(Up to 3 bar cracking pressure) O
are required). Sealing of male stud thread by Eolastic soft Assembly:
seal with types RHV and RHZ.
See assembly instructions for EO/EO 2 connections.
Non-return valves are all packaged against contamination.
Opening pressure:
Standard 1 bar (on request also 0.2, 0.5, 2, 3, 4, 5 and Media:
6 bar are available; please specify on order). For working
pressure see appropriate tables. Cracking pressure toler- Hydraulic oil, low flammability hydraulic fluids (excent
ance: ± 20 %. for types HFC: for HFD types; FKM seals are necessary).
Please indicate on order if used with compressed air.
Not suitable for steam, combustible/explosive gases, or
Material: oxygen.
● Steel zinc-plated (A3C) or (CF chromium6-free), seals For water applications, please consult Parker with details
in NBR (e.g. Perbunan*), or (e.g. Viton*) on request. of water and any additives.
*Perbunan and Viton are registered trademarks of Bayer and Dupont.

O7 Catalogue 4100-5/UK
CD home

Valves

In all diagrams is the peak value

pressure drop tube O.D. 06L/06+08S; size 4;
of the flow rate in l/min. relating to the
female BSPP 1/8, 1/4; RVP 13; DN 3.5 maximum permissible flow velocity of
pressure drop in bar

8 m/sec.

flow rate in l/min

1 bar cracking pressure

pressure drop tube O.D. 8L/10S; size 5;

RVP 16; DN 5.5
pressure drop in bar

flow rate in l/min

1 bar cracking pressure

pressure drop tube O.D. 10L/12S; size 6

female BSPP 3/8; RVP 20; DN 7.5
pressure drop in bar

flow rate in l/min

1 bar cracking pressure

O8 Catalogue 4100-5/UK
CD home

Valves

In all diagrams is the peak value

pressure drop tube O.D. 12L/14S; size 8;
of the flow rate in l/min. relating to the
RVP 24; DN 9.5 maximum permissible flow velocity of
pressure drop in bar

8 m/sec.

flow rate in l/min

1 bar cracking pressure

pressure drop tube O.D. 15L/16S; size 10;

female BSPP 1/2; RVP 27; DN 11.5
pressure drop in bar

flow rate in l/min

1 bar cracking pressure

pressure drop tube O.D. 18L/20S; size 12;

female BSPP 3/4; RVP 35; DN 15.0
O
pressure drop in bar

flow rate in l/min

1 bar cracking pressure

O9 Catalogue 4100-5/UK
CD home

Valves

In all diagrams is the peak value

pressure drop tube O.D. 22L/25S; size 16;
of the flow rate in l/min. relating to the
female BSPP 1; RVP 40; DN 19 maximum permissible flow velocity of
pressure drop in bar

8 m/sec.

flow rate in l/min

1 bar cracking pressure

pressure drop tube O.D. 28L/30S; size 20;

female BSPP 11/4; RVP 47; DN 24
pressure drop in bar

flow rate in l/min

1 bar cracking pressure

pressure drop tube O.D. 35+42L/38S; size 24;

female BSPP 11/2; RVP 55; DN 29
pressure drop in bar

flow rate in l/min

1 bar cracking pressure

O10 Catalogue 4100-5/UK

CD home

Valves

RHD Non return valve

EO 24° cone end / EO 24° cone end

D1 PN (bar)1)

Series 5 DN L1 L2 L3 S1 S2 S3
Weight
g/1 piece Order code* CF A3C 71
3
L) 06 3.5 43 29.0 58.0 17 17 14 46 RHD06LOMD 400 250 250
08 5.5 44 30.0 59.0 19 19 17 61 RHD08LOMD 400 250 250
10 7.5 54.5 40.5 69.5 22 24 19 104 RHD10LOMD 400 250 250
12 9.5 57.5 43.5 72.5 27 30 22 166 RHD12LOMD 400 250 250
15 11.5 61.5 47.5 77.5 27 32 27 192 RHD15LOMD 400 250 250
18 14.0 66.5 51.5 83.5 36 36 32 292 RHD18LOMD 400 160 160
22 18.0 76.5 61.5 93.5 41 46 36 472 RHD22LOMD 250 160 160
28 23.0 84.5 69.5 102.5 50 55 41 746 RHD28LOMD 250 100 100
35 29.0 95.5 74.5 117.5 60 60 50 1062 RHD35LOMD 250 100 100
42 29.0 96 74.0 119.0 65 70 60 1518 RHD42LOMD 250 100 100
S4) 06 3.5 48.5 34.5 63.5 19 19 17 70 RHD06SOMD 420 400 400
08 3.5 48.5 34.5 63.5 19 19 19 74 RHD08SOMD 420 400 400
10 5.5 55.5 40.5 72.5 22 24 22 121 RHD10SOMD 420 400 400
12 7.5 57.5 42.5 74.5 24 27 24 148 RHD12SOMD 420 400 400
14 9.5 63.5 47.5 82.5 27 32 27 218 RHD14SOMD 420 315 315
16 11.5 67.5 50.5 86.5 32 36 30 286 RHD16SOMD 420 315 315
20 15.0 75.5 54.5 97.5 41 46 36 506 RHD20SOMD 420 250 250
25 19.0 82.5 58.5 106.5 46 50 46 639 RHD25SOMD 420 250 250
30 24.0 96.5 69.5 122.5 60 60 50 1157 RHD30SOMD 250 250 250
38 29.0 107.5 75.5 136.5 65 70 60 1650 RHD38SOMD 250 250 250
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
PN (bar)
O
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additonal.
suffix needed)
Steel, zinc plated.,
chrome6-free CF RHD06LOMDCF NBR
Steel, zinc
*Please add the suffixes yellow plated A3C RHD06LOMDA3C NBR
below according to the material/
Stainless steel 71 RHD06LOMD71 VIT
surface required.

O11 Catalogue 4100-5/UK

CD home

Valves

RHV-R-ED Non return valve

EO 24° cone end / Male BSPP thread – ED-seal (ISO 1179)

X1) Eolastic sealing

D1 PN (bar)1)

Series 5 T1 DN D3 L1 L2 L3 L4 S1 S2
Weight
S3 g/1 piece Order code* CF A3C 71
3
L) 06 G 1/8 A 3.5 14 35 28.0 8 42.5 17 17 14 47 RHV06LREDOMD 400 250 250
08 G 1/4 A 5.5 19 37 30.0 12 44.5 19 19 17 62 RHV08LREDOMD 400 250 250
10 G 1/4 A 7.5 19 45.5 38.5 12 53.0 22 24 19 105 RHV10LREDOMD 400 250 250
12 G 3/8 A 9.5 22 49.5 42.5 12 57.0 27 30 22 175 RHV12LREDOMD 400 250 250
15 G 1/2 A 11.5 27 52.5 45.5 14 60.5 27 32 27 205 RHV15LREDOMD 400 250 250
18 G 1/2 A 14.0 27 57.5 50.0 14 66.0 36 36 32 294 RHV18LREDOMD 400 160 160
22 G 3/4 A 18.0 32 62.5 55.0 16 71.0 41 46 36 450 RHV22LREDOMD 250 160 160
28 G1A 23.0 40 70.5 63.0 18 79.5 50 55 41 720 RHV28LREDOMD 250 100 100
35 G 1 1/4 A 29.0 50 79.5 69.0 20 90.5 60 60 50 1050 RHV35LREDOMD 250 100 100
42 G 1 1/2 A 29.0 55 79.5 68.5 22 91.0 65 70 60 1560 RHV42LREDOMD 250 100 100
S4) 06 G 1/4 A 3.5 19 38.5 31.5 12 46.0 19 19 17 73 RHV06SREDOMD 420 400 400
08 G 1/4 A 3.5 19 38.5 31.5 12 46.0 19 19 19 79 RHV08SREDOMD 420 400 400
10 G 3/8 A 5.5 22 45.5 38.0 12 54.0 22 24 22 132 RHV10SREDOMD 420 400 400
12 G 3/8 A 7.5 22 48.5 41.0 12 57.0 24 27 24 153 RHV12SREDOMD 420 400 400
14 G 1/2 A 9.5 27 52.5 44.5 14 62.0 27 32 27 230 RHV14SREDOMD 420 315 315
16 G 1/2 A 11.5 27 56.5 48.0 14 66.0 32 36 30 293 RHV16SREDOMD 420 315 315
20 G 3/4 A 15.0 32 62.5 52.0 16 73.5 41 46 36 511 RHV20SREDOMD 420 250 250
25 G1A 19.0 40 66.5 54.5 18 78.5 46 50 46 648 RHV25SREDOMD 420 250 250
30 G 1 1/4 A 24.0 50 77.5 64.0 20 90.5 60 60 50 1176 RHV30SREDOMD 250 250 250
38 G 1 1/2 A 29.0 55 85.5 69.5 22 100.0 65 70 60 1624 RHV38SREDOMD 250 250 250
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additonal.
suffix needed)
Steel, zinc plated.,
chrome6-free CF RHV06LREDOMDCF NBR
Steel, zinc
*Please add the suffixes yellow plated A3C RHV06LREDOMDA3C NBR
below according to the material/
Stainless steel 71 RHV06LREDOMD71 VIT
surface required.

O12 Catalogue 4100-5/UK

CD home

Valves

RHZ-R-ED Non return valve

Male BSPP thread – ED-seal (ISO 1179) / EO 24° cone end

X1) Eolastic sealing

D1 PN (bar)1)

Series 5 T1 DN D3 L1 L2 L3 L4 S1 S2
Weight
S3 g/1 piece Order code* CF A3C 71
3
L) 06 G 1/8 A 3.5 14 33.5 26.5 8 41.0 17 17 14 44 RHZ06LREDOMD 400 250 250
08 G 1/4 A 5.5 19 35.5 28.5 12 43.0 19 19 17 59 RHZ08LREDOMD 400 250 250
10 G 1/4 A 7.5 19 45.5 38.5 12 53.0 22 24 19 125 RHZ10LREDOMD 400 250 250
12 G 3/8 A 9.5 22 47.5 40.5 12 55.0 27 30 22 161 RHZ12LREDOMD 400 250 250
15 G 1/2 A 11.5 27 49.5 42.5 14 57.5 27 32 27 186 RHZ15LREDOMD 400 250 250
18 G 1/2 A 14.0 27 55.5 48.0 14 64.0 36 36 32 275 RHZ18LREDOMD 400 160 160
22 G 3/4 A 18.0 32 63.5 56.0 16 72.0 41 46 36 463 RHZ22LREDOMD 250 160 160
28 G1A 23.0 40 71.5 64.0 18 80.5 50 55 41 721 RHZ28LREDOMD 250 100 100
35 G 1 1/4 A 29.0 50 80.5 70.0 20 91.5 60 60 50 1073 RHZ35LREDOMD 250 100 100
42 G 1 1/2 A 29.0 55 81.5 70.5 22 93.0 65 70 60 1602 RHZ42LREDOMD 250 100 100
S4 ) 06 G 1/4 A 3.5 19 38.5 31.5 12 46.0 19 19 17 71 RHZ06SREDOMD 420 400 400
08 G 1/4 A 3.5 19 38.5 31.5 12 46.0 19 19 19 74 RHZ08SREDOMD 420 400 400
10 G 3/8 A 5.5 22 45.5 38.0 12 54.0 22 24 22 128 RHZ10SREDOMD 420 400 400
12 G 3/8 A 7.5 22 48.5 41.0 12 57.0 24 27 24 152 RHZ12SREDOMD 420 400 400
14 G 1/2 A 9.5 27 51.5 43.5 14 61.0 27 32 27 223 RHZ14SREDOMD 420 315 315
16 G 1/2 A 11.5 27 54.5 46.0 14 64.0 32 36 30 275 RHZ16SREDOMD 420 315 315
20 G 3/4 A 15.0 32 60.5 50.0 16 71.5 41 46 36 490 RHZ20SREDOMD 420 250 250
25 G1A 19.0 40 66.5 54.5 18 78.5 46 50 46 647 RHZ25SREDOMD 420 250 250
30 G 1 1/4 A 24.0 50 77.5 64.0 20 90.5 60 60 50 1180 RHZ30SREDOMD 250 250 250
38 G 1 1/2 A 29.0 55 87.5 71.5 22 102.0 65 70 60 1670 RHZ38SREDOMD 250 250 250
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
PN (bar)
O
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additonal.
suffix needed)
Steel, zinc plated.,
chrome6-free CF RHZ06LREDOMDCF NBR
*Please add the suffixes
Steel, zinc
below according to the material/
yellow plated A3C RHZ06LREDOMDA3C NBR
surface required.

O13 Catalogue 4100-5/UK

CD home

Valves

RHV-M-ED Non return valve

EO 24° cone end / Male metric thread – ED-seal (ISO 9974)

X1) Eolastic sealing

D1 PN (bar)1)

Series 5 T1 DN D3 L1 L2 L3 L4 S1 S2
Weight
S3 g/1 piece Order code* CF A3C 71
3
L) 06 M 10× 3.5 14 35 28.0 8 42.5 17 17 14 46 RHV06LMEDOMD 400 250 250
08 M 12×1.5 5.5 17 36 29.0 12 43.5 19 19 17 58 RHV08LMEDOMD 400 250 250
10 M 14×1.5 7.5 19 45.5 38.5 12 53.0 22 24 19 108 RHV10LMEDOMD 400 250 250
12 M 16×1.5 9.5 22 49.5 42.5 12 57.0 27 30 22 173 RHV12LMEDOMD 400 250 250
15 M 18×1.5 11.5 24 52.5 45.5 12 60.5 27 32 27 192 RHV15LMEDOMD 400 250 250
18 M 22×1.5 14.0 27 57.5 50.0 14 66.0 36 36 32 298 RHV18LMEDOMD 400 160 160
22 M 26×1.5 18.0 32 62.5 55.0 16 71.0 41 46 36 446 RHV22LMEDOMD 250 160 160
28 M 33×2 23.0 40 70.5 63.0 18 79.5 50 55 41 722 RHV28LMEDOMD 250 100 100
35 M 42×2 29.0 50 79.5 69.0 20 90.5 60 60 50 1053 RHV35LMEDOMD 250 100 100
42 M 48×2 29.0 55 79.5 68.5 22 91.0 65 70 60 1563 RHV42LMEDOMD 250 100 100
S4) 06 M 12×1.5 3.5 17 38.5 31.5 12 46.0 19 19 17 70 RHV06SMEDOMD 420 400 400
08 M 14×1.5 3.5 19 38.5 31.5 12 46.0 19 19 19 76 RHV08SMEDOMD 420 400 400
10 M 16×1.5 5.5 22 45.5 38.0 12 54.0 22 24 22 124 RHV10SMEDOMD 420 400 400
12 M 18×1.5 7.5 24 48.5 41.0 12 57.0 24 27 24 157 RHV12SMEDOMD 420 400 400
14 M 20×1.5 9.5 26 52.5 44.5 14 62.0 27 32 27 215 RHV14SMEDOMD 420 315 315
16 M 22×1.5 11.5 27 56.5 48.0 14 66.0 32 36 30 296 RHV16SMEDOMD 420 315 315
20 M 27×2 15.0 32 62.5 52.0 16 73.5 41 46 36 521 RHV20SMEDOMD 420 250 250
25 M 33×2 19.0 40 66.5 54.5 18 78.5 46 50 46 648 RHV25SMEDOMD 420 250 250
30 M 42×2 24.0 50 77.5 64.0 20 90.5 60 60 50 1178 RHV30SMEDOMD 250 250 250
38 M 48×2 29.0 55 85.5 69.5 22 100.0 65 70 60 1627 RHV38SMEDOMD 250 250 250
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additonal.
suffix needed)
Steel, zinc plated.,
chrome6-free CF RHV06LMEDOMDCF NBR
Steel, zinc
*Please add the suffixes yellow plated A3C RHV06LMEDOMDA3C NBR
below according to the material/
Stainless steel 71 RHV06LMEDOMD71 VIT
surface required.

O14 Catalogue 4100-5/UK

CD home

Valves

RHZ-M-ED Non return valve

Male metric thread – ED-seal (ISO 9974) / EO 24° cone end

X1) Eolastic sealing

D1 PN (bar)1)

Series 5 T1 DN D3 L1 L2 L3 L4 S1 S2
Weight
S3 g/1 piece Order code* CF A3C 71
3
L) 06 M 10×1 3.5 14 33.5 26.5 8 41.0 17 17 14 44 RHZ06LMEDOMD 400 250 250
08 M 12×1.5 5.5 17 35.5 28.5 12 43.0 19 19 17 58 RHZ08LMEDOMD 400 250 250
10 M 14×1.5 7.5 19 45.5 38.5 12 53.0 22 24 19 104 RHZ10LMEDOMD 400 250 250
12 M 16×1.5 9.5 22 47.5 40.5 12 55.0 27 30 22 169 RHZ12LMEDOMD 400 250 250
15 M 18×1.5 11.5 24 49.5 42.5 12 57.5 27 32 27 174 RHZ15LMEDOMD 400 250 250
18 M 22×1.5 14.0 27 55.5 48.0 14 64.0 36 36 32 279 RHZ18LMEDOMD 400 160 160
22 M 26×1.5 18.0 32 63.5 56.0 16 72.0 41 46 36 459 RHZ22LMEDOMD 250 160 160
28 M 33×2 23.0 40 71.5 64.0 18 80.5 50 55 41 721 RHZ28LMEDOMD 250 100 100
35 M 42×2 29.0 50 80.5 70.0 20 91.5 60 60 50 1078 RHZ35LMEDOMD 250 100 100
42 M 48×2 29.0 55 81.5 70.5 22 93.0 65 70 60 1601 RHZ42LMEDOMD 250 100 100
S4 ) 06 M 12×1.5 3.5 17 38.5 31.5 12 46.0 19 19 17 70 RHZ06SMEDOMD 420 400 400
08 M 14×1.5 3.5 19 38.5 31.5 12 46.0 19 19 19 75 RHZ08SMEDOMD 420 400 400
10 M 16×1.5 5.5 22 45.5 38.0 12 54.0 22 24 22 123 RHZ10SMEDOMD 420 400 400
12 M 18×1.5 7.5 24 48.5 41.0 12 57.0 24 27 24 157 RHZ12SMEDOMD 420 400 400
14 M 20×1.5 9.5 26 51.5 43.5 14 61.0 27 32 27 214 RHZ14SMEDOMD 420 315 315
16 M 22×1.5 11.5 27 54.5 46.0 14 64.0 32 36 30 279 RHZ16SMEDOMD 420 315 315
20 M 27×2 15.0 32 60.5 50.0 16 71.5 41 46 36 487 RHZ20SMEDOMD 420 250 250
25 M 33×2 19.0 40 66.5 54.5 18 78.5 46 50 46 647 RHZ25SMEDOMD 420 250 250
30 M 42×2 24.0 50 77.5 64.0 20 90.5 60 60 50 1180 RHZ30SMEDOMD 250 250 250
38 M 48×2 29.0 55 87.5 71.5 22 102.0 65 70 60 1669 RHZ38SMEDOMD 250 250 250
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
PN (bar)
O
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard sealing
surface material
and material (no additonal.
suffix needed)
Steel, zinc plated.,
chrome6-free CF RHZ06LMEDOMDCF NBR
Steel, zinc
*Please add the suffixes yellow plated A3C RHZ06LMEDOMDA3C NBR
below according to the material/
Stainless steel 71 RHZ06LMEDOMD71 VIT
surface required.

O15 Catalogue 4100-5/UK

CD home

Valves

RHDI Non return valve

Female BSPP thread (ISO 1179-1) / Female BSPP thread (ISO 1179-1)

Weight
Series T1 DN D1 L1 L2 L3 S1 S2 g/1 piece Order code* CF A3C1) 71
L3) G11/18 3.5 19 42.5 12.0 8.0 19 19 76 RHDI1/8 400 400 400
G 1/4 3.5 19 51.0 16.0 12.0 19 19 82 RHDI1/4 400 400 400
G 3/8 7.5 24 60.0 17.0 12.0 24 27 157 RHDI3/8 400 400 400
G 1/2 11.5 32 72.0 20.0 15.0 32 36 344 RHDI1/2 315 315 315
G 3/4 15.0 41 84.0 22.0 16.5 41 46 664 RHDI3/4 250 250 250
G1 19.0 46 95.0 25.5 19.0 46 50 821 RHDI1 250 250 250
G 11/4 24.0 60 110.0 28.0 21.5 60 60 1581 RHDI11/4 250 250 250
G 11/2 29.0 65 114.0 28.5 22.0 65 70 1919 RHDI11/2 250 250 250
1
) Pressure shown = item deliverable
3
) L = light series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF RHDI1/8CF NBR
Steel, zinc
*Please add the suffixes yellow plated A3C RHDI1/8A3C NBR
below according to the material/
Stainless steel 71 RHDI1/871 VIT
surface required.

O16 Catalogue 4100-5/UK

CD home

Valves

RVP Non return valve cartridge

X1) Supporting ring PTFE

X2) O-ring NBR
X3) Sealing disc NBR

PN (bar)1)
Valve L1 Weight
ITL DN D1 D2 ± 0,15 L2 L3 O-ring Supporting ring g/1 piece Order code* CF A3C 71
6-L/6u.8-S 3.5 12.945 ± 0.055 13 +0.12 23.15 9.5 6.0 8.3×2.4 SRA 13-2.05-1.0 21 RVP13 420 400 400
+0.05
8-L/10-S 5.5 15.945 ± 0.055 16 +0.12 26.65 9.5 6.5 11.3×2.4 SRA 16-2.05-1.0 32 RVP16 420 400 400
+0.05
10-L/12-S 7.5 19.935 ± 0.065 20 +0.142 30.15 9.5 6.5 15.3×2.4 SRA 20-2.05-1.0 54 RVP20 420 400 400
+0.065
12-L/14-S 9.5 23.935 ± 0.065 24 +0.149 35.15 12.0 7.5 18.2×3 SRA 24-2.6-1.0 80 RVP24 420 315 315
+0.065
15-L/16-S 11.5 26.935 ± 0.065 27 +0.149 38.15 12.0 7.5 21.2×3 SRA 27-2.6-1.0 105 RVP27 420 315 315
+0.065
18-L/20-S 15.0 34.92 ± 0.08 35 +0.18 44.65 12.0 9.5 29.2×3 SRA 35-2.5-1.0 204 RVP35 420 250 250
+0.08
22-L/25-S 19.0 39.92 ± 0.08 40 +0.18 50.65 12.0 11.0 34.2×3 SRA 40-2.5-1.0 275 RVP40 420 250 250
+0.08
28-L/30-S 24.0 46.92 ± 0.08 47 +0.18 60.15 13.0 13.0 41.2×3 SRA 47-2.6-1.5 412 RVP47 250 250 250
+0.08
35-L/38-S 29.0 54.905 ± 0.095 55 +0.22 70.15 16.0 13.0 44.2×5.7 SRA 55-5.1-1.5 607 RVP55 250 250 250
+0.1

1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF RHP13CF NBR
Steel, zinc
*Please add the suffixes yellow plated A3C RHP13A3C NBR
below according to the material/
Stainless steel 71 RHP1371 VIT
surface required.

O17 Catalogue 4100-5/UK

CD home

Valves

I-TL Internal parts of non return valve

X1) poppet
X2) sealing disc (smooth side to the poppet)
X3) cover disc
X4) spring
X5) passage disc

PN (bar)1)
Tube Weight
Series O.D. D1+0.1 D2+0.1 D3+0.1 L1±0.1 L2 Hub g/1 piece Order code* A3C 71
L/S/S 06/06/08 3.5 7.5 8.6 8.2 2.0 1.0 2 ITL06L/06+08S * *
L/S 08/10 5.5 10.2 11.6 11.0 2.0 1.7 4 ITL08L/10S * *
L/S 10/12 7.5 13.0 14.1 14.0 2.0 2.3 7 ITL10L/12S * *
L/S 12/14 9.5 16.7 18.1 16.5 2.5 2.9 13 ITL12L/14S * *
L/S 15/16 11.5 19.5 20.6 19.0 2.5 3.5 18 ITL15L/16S * *
L/S 18/20 15.0 25.2 27.1 22.5 3.0 4.4 37 ITL18L/20S * *
L/S 22/25 19.0 30.8 32.6 27.0 3.0 5.5 54 ITL22L/25S * *
L/S 28/30 24.0 38.6 40.6 32.5 3.5 7.3 107 ITL28L/30S * *
L/L/S 35/38/42 29.0 45.7 48.1 37.5 3.5 8.9 144 ITL35L+42l/38S * *

* = item deliverable
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc
*Please add the suffixes yellow plated A3C ITL06L/06+008S NBR
below according to the material/
Stainless steel 71 ITL06L71/06+008S VIT
surface required.

O18 Catalogue 4100-5/UK

CD home

Valves

RHD/V/Z Non return valves with O-Lok® or Triple-Lok® connections

Material:
● Steel zinc-plated (A3C) or (CF chromium6-free), seals
in NBR (e.g. Perbunan*)

● Internal parts in stainless steel with FKM (Viton) also

O
available on request.

O19 Catalogue 4100-5/UK

CD home

Valves

RHDMLOS Non return valve

O-Lok® ORFS end / O-Lok® ORFS end

Tube 1 Tube 2 ORFS ORFS PN (bar)1)

O.D. O.D. (UN/UNF (UN/UNF) DN
thread thread (Nom. Weight
mm Inch mm Inch T T1 H1 H2 FF diam.) g/1 piece Order code* CF A3C
6 1/4 6 1/4 9/16-18UNF 9/16-18UNF 19 19 44.5 3.5 108 4RHDMLOS 420 400
8, 10 5/16, 3/8 8, 10 5/16, 3/8 11/16-16UNF 11/16-16UNF 22 24 53.5 5.5 188 6RHDMLOS 420 400
12 1/2 12 1/2 13/16-16UNF 13/16-16UNF 24 27 59.5 7.5 223 8RHDMLOS 420 400
14, 15, 16 5/8 14, 15, 16 5/8 1-14UNF 1-14UNF 32 36 70.5 11.5 428 10RHDMLOS 420 315
18, 20 3/4 18, 20 3/4 1 3/16-12UNF 1 3/16-12UNF 41 46 77.5 15.0 731 12RHDMLOS 420 250
22, 25 1 22, 25 1 1 7/16-12UNF 1 7/16-12UNF 46 50 81.5 19.0 1076 16RHDMLOS 420 250
28, 30, 32 1 1/4 28, 30, 32 1 1/4 1 11/16-12UNF 1 11/16-12UNF 60 60 91.5 24.0 1630 20RHDMLOS 250 250
35, 38 1 1/2 35, 38 1 1/2 2-12UNF 2-12UNF 65 70 98.5 29.0 2362 24RHDMLOS 250 250
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF 4RHDMLOSCF NBR
*Please add the suffixes
Steel, zinc A3C (no
below according to the material/ yellow plated suffix needed) 4RHDMLOS NBR
surface required.

O20 Catalogue 4100-5/UK

CD home

Valves

RHV42EDMLOS Non return valve

Male BSPP thread – ED-seal (ISO 1179) / O-Lok® ORFS end

Tube BSPP ORFS PN (bar)1)

O.D. thread (UN/UNF) DN
thread (Nom. Weight
mm Inch T42 T H1 H2 L5 HH diam.) g/1 piece Order code* CF A3C
6 1/4 G 1/8 9/16-18UNF 19 19 44.5 36.5 3.5 92 4RHV42EDMLOS 420 400
8, 10 5/16, 3/8 G 1/4 11/16-16UNF 22 24 56.5 44.5 6.5 165 6RHV42EDMLOS 420 400
12 1/2 G 3/8 13/16-16UNF 24 27 61.5 49.5 7.5 191 8RHV42EDMLOS 420 400
14, 15, 16 5/8 G 1/2 1-14UNF 32 36 70.0 56.0 11.5 366 10RHV42EDMLOS 420 315
18, 20 3/4 G 3/4 1 3/16-12UNF 41 46 77.5 63.5 15.0 631 12RHV42EDMLOS 420 250
22, 25 1 G1 1 7/16-12UNF 46 50 84.0 66.0 19.0 863 16RHV42EDMLOS 420 250
28, 30, 32 1 1/4 G 1 1/4 1 11/16-12UNF 60 60 95.0 75.0 24.0 1403 20RHV42EDMLOS 250 250
35, 38 1 1/2 G 1 1/2 2-12UNF 65 70 105.0 83.0 29.0 1969 24RHV42EDMLOS 250 250
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF 4RHV42EDMLOSCF NBR
*Please add the suffixes
Steel, zinc A3C (no
below according to the material/ yellow plated suffix needed) 4RHV42EDMLOS NBR
surface required.

O21 Catalogue 4100-5/UK

CD home

Valves

RHZ42EDMLOS Non return valve

O-Lok® ORFS end / Male BSPP thread – ED-seal (ISO 1179)

Tube BSPP ORFS PN (bar)1)

O.D. thread (UN/UNF) DN
thread (Nom. Weight
mm Inch T42 T H1 H2 L5 HH diam.) g/1 piece Order code* CF A3C
6 1/4 G 1/8 9/16-18UNF 19 19 44.5 36.5 3.5 91 4RHZ42EDMLOS 420 400
8, 10 5/16, 3/8 G 1/4 11/16-16UNF 22 24 56.5 44.5 6.5 161 6RHZ42EDMLOS 420 400
12 1/2 G 3/8 13/16-16UNF 24 27 61.5 49.5 7.5 190 8RHZ42EDMLOS 420 400
14, 15, 16 5/8 G 1/2 1-14UNF 32 36 70.0 56.0 11.5 348 10RHZ42EDMLOS 420 315
18, 20 3/4 G 3/4 1 3/16-12UNF 41 46 77.5 53.5 15.0 634 12RHZ42EDMLOS 420 250
22, 25 1 G1 1 7/16-12UNF 46 50 84.0 66.0 19.0 863 16RHZ42EDMLOS 420 250
28, 30, 32 1 1/4 G 1 1/4 1 11/16-12UNF 60 60 95.0 75.0 24.0 1397 20RHZ42EDMLOS 250 250
35, 38 1 1/2 G 1 1/2 2-12UNF 65 70 105.0 83.0 29.0 2001 24RHZ42EDMLOS 250 250
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF 4RHZ42EDMLOSCF NBR
*Please add the suffixes
Steel, zinc A3C (no
below according to the material/ yellow plated suffix needed) 4RHZ42EDMLOS NBR
surface required.

O22 Catalogue 4100-5/UK

CD home

Valves

RHV5OMLOS Non return valve

Male UN/UNF thread – O-ring (ISO 11926) / O-Lok® ORFS end

Tube UNF ORFS PN (bar)1)

O.D. male (UN/UNF) DN
thread thread (Nom. Weight
mm Inch T5 T H1 H2 L5 HH diam.) g/1 piece Order code* CF A3C
6 1/4 7/16-20UNF 9/16-18UNF 19 19 45.5 34.5 3.5 92 4RHV5OMLOS 420 400
8, 10 5/16, 3/8 9/16-18UNF 11/16-16UNF 22 24 54.5 42.5 5.5 165 6RHV5OMLOS 420 400
12 1/2 3/4-16UNF 13/16-16UNF 24 27 60.5 46.5 5.5 165 8RHV5OMLOS 420 400
14, 15, 16 5/8 7/8-14UNS 1-14UNF 32 36 71.0 55.0 11.5 366 10RHV5OMLOS 420 315
18, 20 3/4 1 1/16-12UN 1 3/16-12UNF 41 46 79.0 60.5 15.0 631 12RHV5OMLOS 420 250
22, 25 1 1 5/16-12UN 1 7/16-12UNF 46 50 82.5 64.0 19.0 863 16RHV5OMLOS 420 250
28, 30, 32 1 1/4 1 5/8-12UN 1 11/16-12UNF 60 60 92.5 74.0 24.0 1403 20RHV5OMLOS 250 250
35, 38 1 1/2 1 7/8-12UN 2-12UNF 65 70 99.5 81.0 29.0 1969 24RHV5OMLOS 250 250
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF RHV5OMLOSCF NBR
*Please add the suffixes
Steel, zinc A3C (no
below according to the material/ yellow plated suffix needed) 4RHV5OMLOS NBR
surface required.

O23 Catalogue 4100-5/UK

CD home

Valves

RHZ5OMLOS Non return valve

O-Lok® ORFS end / Male UN/UNF thread – O-ring (ISO 11926)

Tube UNF ORFS PN (bar)1)

O.D. male (UN/UNF) DN
thread thread (Nom. Weight
mm Inch T5 T H1 H2 L5 HH diam.) g/1 piece Order code* CF A3C
6 1/4 7/16-20UNF 9/16-18UNF 19 19 45.5 34.5 3.5 91 4RHZ5OMLOS 420 400
8, 10 5/16, 3/8 9/16-18UNF 11/16-16UNF 22 24 54.5 42.5 5.5 161 6RHZ5OMLOS 420 400
12 1/2 3/4-16UNF 13/16-16UNF 24 27 60.5 46.5 5.5 161 8RHZ5OMLOS 420 400
14, 15, 16 5/8 7/8-14UNS 1-14UNF 32 36 71.0 55.0 11.5 348 10RHZ5OMLOS 420 315
18, 20 3/4 1 1/16-12UN 1 3/16-12UNF 41 46 79.0 60.5 15.0 634 12RHZ5OMLOS 420 250
22, 25 1 1 5/16-12UN 1 7/16-12UNF 46 50 82.5 64.0 19.0 863 16RHZ5OMLOS 420 250
28, 30, 32 1 1/4 1 5/8-12UN 1 11/16-12UNF 60 60 92.5 74.0 24.0 1397 20RHZ5OMLOS 250 250
35, 38 1 1/2 1 7/8-12UN 2-12UNF 65 70 99.5 81.0 29.0 2001 24RHZ5OMLOS 250 250
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF 4RHZ5OMLOSCF NBR
*Please add the suffixes
Steel, zinc A3C (no
below according to the material/ yellow plated suffix needed) 4RHZ5OMLOS NBR
surface required.

O24 Catalogue 4100-5/UK

CD home

Valves

RHV82EDMLOS Non return valve

Male metric thread – ED-seal (ISO 9974) / O-Lok® ORFS end

Tube ORFS PN (bar)1)

O.D. metric (UN/UNF) DN
thread thread (Nom. Weight
mm Inch T82 T H1 H2 L5 HH diam.) g/1 piece Order code* CF A3C
6 1/4 M12×1.5 9/16-18UNF 19 19 48.5 36.5 3.5 89 4M12RHV82EDMLOS 420 400
8, 10 5/16, 3/8 M16×1.5 11/16-16UNF 22 24 56.5 44.5 5.5 157 6M16RHV82EDMLOS 420 400
12 1/2 M18×1.5 13/16-16UNF 24 27 61.5 49.5 7.5 195 8M18RHV82EDMLOS 420 400
14, 15, 16 5/8 M22×1.5 1-14UNF 32 36 72.0 58.0 11.5 369 10M22RHV82EDMLOS 420 315
18, 20 3/4 M27×2.0 1 3/16-12UNF 41 46 79.5 63.5 15.0 628 12M27RHV82EDMLOS 420 250
22, 25 1 M33×2.0 1 7/16-12UNF 46 50 84.0 66.0 19.0 867 16M33RHV82EDMLOS 420 250
28, 30, 32 1 1/4 M42×2.0 1 11/16-12UNF 60 60 95.0 75.0 24.0 1409 20M42RHV82EDMLOS 250 250
35, 38 1 1/2 M48×2.0 2-12UNF 65 70 103.0 81.0 29.0 1970 24M48RHV82EDMLOS 250 250
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF 4M12RHV82EDMLOSCF NBR
*Please add the suffixes
Steel, zinc A3C (no
below according to the material/ yellow plated suffix needed) 4M12RHV82EDMLOS NBR
surface required.

O25 Catalogue 4100-5/UK

CD home

Valves

RHZ82EDMLOS Non return valve

O-Lok® ORFS end / Male metric thread – ED-seal (ISO 9974)

Tube ORFS PN (bar)1)

O.D. metric (UN/UNF) DN
thread thread (Nom. Weight
mm Inch T82 T H1 H2 L5 HH diam.) g/1 piece Order code* CF A3C
6 1/4 M12×1.5 9/16-18UNF 19 19 48.5 36.5 3.5 89 4M12RHZ82EDMLOS 420 400
8, 10 5/16, 3/8 M16×1.5 11/16-16UNF 22 24 56.5 44.5 5.5 156 6M16RHZ82EDMLOS 420 400
12 1/2 M18×1.5 13/16-16UNF 24 27 61.5 49.5 7.5 195 8M18RHZ82EDMLOS 420 400
14, 15, 16 5/8 M22×1.5 1-14UNF 32 36 70.0 56.0 11.5 352 10M22RHZ82EDMLOS 420 315
18, 20 3/4 M27×2.0 1 3/16-12UNF 41 46 77.5 61.5 15.0 608 12M27RHZ82EDMLOS 420 250
22, 25 1 M33×2.0 1 7/16-12UNF 46 50 84.0 66.0 19.0 965 16M33RHZ82EDMLOS 420 250
28, 30, 32 1 1/4 M42×2.0 1 11/16-12UNF 60 60 95.0 75.0 24.0 1396 20M42RHZ82EDMLOS 250 250
35, 38 1 1/2 M48×2.0 2-12UNF 65 70 115.0 93.0 29.0 1978 24M48RHZ82EDMLOS 250 250
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF 4M12RHZ82EDMLOSCF NBR
*Please add the suffixes
Steel, zinc A3C (no
below according to the material/ yellow plated suffix needed) 4M12RHZ82EDMLOS NBR
surface required.

O26 Catalogue 4100-5/UK

CD home

Valves

RHDMTXS Non return valve

Triple-Lok® 37° flare end / Triple-Lok® 37° flare end

Tube 1 Tube 2 Thread Thread PN (bar)1)

O.D. O.D. JIC JIC DN
SAE SAE (Nom. Weight
mm Inch mm Inch T1 T2 C1 C2 L1 diam.) g/1 piece Order code* CF A3C
6 1/4 6 1/4 7/16-20UNF 7/16-20UNF 19 19 52.5 3.5 108 4RHDMTXS 420 350
8 5/16 8 5/16 1/2-20UNF 1/2-20UNF 22 24 59.5 5.5 188 5RHDMTXS 420 350
10 3/8 10 3/8 9/16-18UNF 9/16-18UNF 24 27 61.5 7.5 223 6RHDMTXS 420 350
12 1/2 12 1/2 3/4-16UNF 3/4-16UNF 27 32 69.5 9.5 324 8RHDMTXS 420 315
14, 15, 16 5/8 14, 15, 16 5/8 7/8-14UNF 7/8-14UNF 32 36 78.5 11.5 428 10RHDMTXS 350 315
18, 20 3/4 18, 20 3/4 1 1/16-12UN 1 1/16-12UN 41 46 87.5 15.0 731 12RHDMTXS 350 250
25 1 25 1 1 5/16-12UN 1 5/16-12UN 46 50 92.5 19.0 1076 16RHDMTXS 280 250
28, 30, 32 1 1/4 28, 30, 32 1 1/4 1 5/8-12UN 1 5/8-12UN 60 60 105.5 24.0 1630 20RHDMTXS 250 210
35, 38 1 1/2 35, 38 1 1/2 1 7/8-12UN 1 7/8-12UN 65 70 118.5 29.0 2362 24RHDMTXS 210 140
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF 4RHDMTXSCF NBR
*Please add the suffixes
Steel, zinc A3C (no
below according to the material/ yellow plated suffix needed) 4RHDMTXS NBR
surface required.

O27 Catalogue 4100-5/UK

CD home

Valves

RHV42EDMXS Non return valve

Male BSPP thread – ED-seal (ISO 1179) / Triple-Lok® 37° flare end

Tube BSPP Thread PN (bar)1)

O.D. thread JIC DN
SAE (Nom. Weight
mm Inch T4 T C1 C2 L5 LL diam.) g/1 piece Order code* CF A3C
6 1/4 G 1/8 7/16-20UNF 19 19 48.0 40.0 3.5 92 4RHV42EDMXS 420 350
8 5/16 G 1/4 1/2-20UNF 22 24 59.5 47.5 5.5 165 5-4RHV42EDMXS 420 350
10 3/8 G 1/4 9/16-18UNF 24 27 62.0 50.0 7.5 191 6RHV42EDMXS 420 350
12 1/2 G 3/8 3/4-16UNF 27 32 67.0 55.0 9.5 277 8RHV42EDMXS 420 315
14, 15, 16 5/8 G 1/2 7/8-14UNS 32 36 76.0 62.0 11.5 366 10RHV42EDMXS 350 315
18, 20 3/4 G 3/4 1 1/16-12UN 41 46 84.5 68.5 15.0 631 12RHV42EDMXS 350 250
25 1 G1 1 5/16-12UN 46 50 89.5 71.5 19.0 863 16RHV42EDMXS 280 250
28, 30, 32 1 1/4 G 1 1/4 1 5/8-12UN 60 60 102.0 82.0 24.0 1403 20RHV42EDMXS 250 210
35, 38 1 1/2 G 1 1/2 1 7/8-12UN 65 70 113.0 91.0 29.0 1969 24RHV42EDMXS 210 140
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF 4RHV42EDMXSCF NBR
*Please add the suffixes
Steel, zinc A3C (no
below according to the material/ yellow plated suffix needed) 4RHV42EDMXS NBR
surface required.

O28 Catalogue 4100-5/UK

CD home

Valves

RHZ42EDMXS Non return valve

Triple-Lok® 37° flare end / Male BSPP thread – ED-seal (ISO 1179)

Tube BSPP Thread PN (bar)1)

O.D. thread JIC DN
SAE (Nom. Weight
mm Inch T4 T C1 C2 L5 LL diam.) g/1 piece Order code* CF A3C
6 1/4 G 1/8 7/16-20UNF 19 19 48.0 40.0 3.5 89 4RHZ42EDMXS 420 350
8 5/16 G 1/4 1/2-20UNF 22 24 59.0 47.0 5.5 156 5-4RHZ42EDMXS 420 350
10 3/8 G 1/4 9/16-18UNF 24 27 62.0 50.0 7.5 190 6RHZ42EDMXS 420 350
12 1/2 G 3/8 3/4-16UNF 27 32 66.0 54.0 9.5 278 8RHZ42EDMXS 420 315
14, 15, 16 5/8 G 1/2 7/8-14UNS 32 36 74.0 60.0 11.5 348 10RHZ42EDMXS 350 315
18, 20 3/4 G 3/4 1 1/16-12UN 41 46 82.5 66.5 15.0 634 12RHZ42EDMXS 350 250
25 1 G1 1 5/16-12UN 46 50 89.5 71.5 19.0 863 16RHZ42EDMXS 280 250
28, 30, 32 1 1/4 G 1 1/4 1 5/8-12UN 60 60 102.0 82.0 24.0 1397 20RHZ42EDMXS 250 210
35, 38 1 1/2 G 1 1/2 1 7/8-12UN 65 70 115.0 93.0 29.0 2001 24RHZ42EDMXS 210 140
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF 4RHZ42EDMXSCF NBR
*Please add the suffixes
Steel, zinc A3C (no
below according to the material/ yellow plated suffix needed) 4RHZ42EDMXS NBR
surface required.

O29 Catalogue 4100-5/UK

CD home

Valves

RHV5OMXS Non return valve

Male UN/UNF thread – O-ring (ISO 11926) / Triple-Lok® 37° flare end

Tube Thread PN (bar)1)

O.D. Thread JIC DN
UNF SAE (Nom. Weight
mm Inch T5 T C1 C2 L5 LL diam.) g/1 piece Order code* CF A3C
6 1/4 7/16-20UNF 7/16-18UNF 19 19 49.5 38.5 3.5 92 4RHV5OMXS 420 350
8 5/16 1/2-20UNF 1/2-20UNF 22 24 56.5 45.5 5.5 165 5RHV5OMXS 420 350
10 3/8 9/16-18UNF 9/16-18UNF 24 27 59.5 47.5 7.5 191 6RHV5OMXS 420 350
12 1/2 3/4-16UNF 3/4-16UNF 27 32 66.5 52.5 9.5 277 8RHV5OMXS 420 315
14, 15, 16 5/8 7/8-14UNS 7/8-14UNS 32 36 75.0 59.0 11.5 366 10RHV5OMXS 350 315
18, 20 3/4 1 1/16-12UN 1 1/16-12UN 41 46 84.0 65.5 15.0 631 12RHV5OMXS 350 250
25 1 1 5/16-12UN 1 5/16-12UN 46 50 88.0 69.5 19.0 863 16RHV5OMXS 280 250
28, 30, 32 1 1/4 1 5/8-12UN 1 5/8-12UN 60 60 99.5 81.0 24.0 1403 20RHV5OMXS 250 210
35, 38 1 1/2 1 7/8-12UN 1 7/8-12UN 65 70 109.5 91.0 29.0 1969 24RHV5OMXS 210 140
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF RHV5OMXSCF NBR
*Please add the suffixes
Steel, zinc A3C (no
below according to the material/ yellow plated suffix needed) 4RHV50MXS NBR
surface required.

O30 Catalogue 4100-5/UK

CD home

Valves

RHZ50MXS Non return valve

Triple-Lok® 37° flare end / Male UN/UNF thread – O-ring (ISO 11926)

Tube Thread PN (bar)1)

O.D. Thread JIC DN
UNF SAE (Nom. Weight
mm Inch T5 T C1 C2 L5 LL diam.) g/1 piece Order code* CF A3C
6 1/4 7/16-20UNF 7/16-18UNF 19 19 49.5 38.5 3.5 91 4RHZ5OMXS 420 350
8 5/16 1/2-20UNF 1/2-20UNF 22 24 56.5 45.5 5.5 161 5RHZ5OMXS 420 350
10 3/8 9/16-18UNF 9/16-18UNF 24 27 59.5 47.5 7.5 190 6RHZ5OMXS 420 350
12 1/2 3/4-16UNF 3/4-16UNF 27 32 66.5 52.5 9.5 278 8RHZ5OMXS 420 315
14, 15, 16 5/8 7/8-14UNS 7/8-14UNS 32 36 75.0 59.0 11.5 348 10RHZ5OMXS 350 315
18, 20 3/4 1 1/16-12UN 1 1/16-12UN 41 46 84.0 65.5 15.0 634 12RHZ5OMXS 350 250
25 1 1 5/16-12UN 1 5/16-12UN 46 50 88.0 69.5 19.0 863 16RHZ5OMXS 280 250
28, 30, 32 1 1/4 1 5/8-12UN 1 5/8-12UN 60 60 99.5 81.0 24.0 1397 20RHZ5OMXS 250 210
35, 38 1 1/2 1 7/8-12UN 1 7/8-12UN 65 70 109.5 91.0 29.0 2001 24RHZ5OMXS 210 240
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF 4RHZ5OMXSCF NBR
*Please add the suffixes
Steel, zinc A3C (no
below according to the material/ yellow plated suffix needed) 4RHZ50MXS NBR
surface required.

O31 Catalogue 4100-5/UK

CD home

Valves

RHV82EDMXS Non return valve

Male metric thread – ED-seal (ISO 9974) / Triple-Lok® 37° flare end

Tube Thread PN (bar)1)

O.D. Metric JIC DN
thread SAE (Nom. Weight
mm Inch T82 T C1 C2 L5 LL diam.) g/1 piece Order code* CF A3C
6 1/4 M10×1.0 7/16-20UNF 19 19 48.0 40.0 3.5 89 4M10RHV82EDMXS 420 350
8 5/16 M12×1.5 1/2-20UNF 22 24 59.5 47.5 5.5 157 5M12RHV82EDMXS 420 350
10 3/8 M14×1.5 9/16-18UNF 24 27 62.0 50.0 7.5 195 6M14RHV82EDMXS 420 350
12 1/2 M16×1.5 3/4-16UNF 27 32 67.0 55.0 9.5 274 8M16RHV82EDMXS 420 315
14, 15, 16 5/8 M18×1.5 7/8-14UNS 32 36 73.5 61.5 11.5 369 10M18RHV82EDMXS 350 315
18, 20 3/4 M27×2.0 1 1/16-12UN 41 46 84.5 68.5 15.0 628 12M27RHV82EDMXS 350 160
25 1 M33×2.0 1 5/16-12UN 46 50 89.5 71.5 19.0 867 16M33RHV82EDMXS 280 250
28, 30, 32 1 1/4 M42×2.0 1 5/8-12UN 60 60 102.0 82.0 24.0 1409 20M42RHV82EDMXS 250 210
35, 38 1 1/2 M48×2.0 1 7/8-12UN 65 70 113.0 91.0 29.0 1970 24M48RHV82EDMXS 210 140
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF 4M10RHV82EDMXSCF NBR
*Please add the suffixes
Steel, zinc A3C (no
below according to the material/ yellow plated suffix needed) 4M10RHV82EDMXS NBR
surface required.

O32 Catalogue 4100-5/UK

CD home

Valves

RHZ82EDMXS Non return valve

Triple-Lok® 37° flare end / Male metric thread – ED-seal (ISO 9974)

Tube Thread PN (bar)1)

O.D. Metric JIC DN
thread SAE (Nom. Weight
mm Inch T82 T C1 C2 L5 LL diam.) g/1 piece Order code* CF A3C
6 1/4 M10×1.0 7/16-20UNF 19 19 48.0 40.0 3.5 89 4M10RHZ82EDMXS 420 350
8 5/16 M12×1.5 1/2-20UNF 22 24 59.5 47.5 5.5 156 5M12RHZ82EDMXS 420 350
10 3/8 M14×1.5 9/16-18UNF 24 27 62.0 50.0 7.5 195 6M14RHZ82EDMXS 420 350
12 1/2 M16×1.5 3/4-16UNF 27 32 66.0 54.0 9.5 272 8M16RHZ82EDMXS 420 315
14, 15, 16 5/8 M18×1.5 7/8-14UNS 32 36 71.5 59.5 11.5 352 10M18RHZ82EDMXS 350 315
18, 20 3/4 M27×2.0 1 1/16-12UN 41 46 82.5 66.5 15.0 608 12M27RHZ82EDMXS 350 250
25 1 M33×2.0 1 5/16-12UN 46 50 89.5 71.5 19.0 965 16M33RHZ82EDMXS 280 250
28, 30, 32 1 1/4 M42×2.0 1 5/8-12UN 60 60 102.0 82.0 24.0 1396 20M42RHZ82EDMXS 250 210
35, 38 1 1/2 M48×2.0 1 7/8-12UN 65 70 115.0 93.0 29.0 1807 24M48RHZ82EDMXS 210 140
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF 4M10RHZ82EDMXSCF NBR
*Please add the suffixes
Steel, zinc A3C (no
below according to the material/ yellow plated suffix needed) 4M10RHZ82EDMXS NBR
surface required.

O33 Catalogue 4100-5/UK

CD home

Valves

DV Shut-off valve PN 10 – Casing DIN 3512

EO 24° cone end / EO 24° cone end
(with internal threaded spindle)
For cold and warm water* up to 80°C, compressed air, mineral oils and fuel oils types EL and L, 6 bar and up to 80°C.
The pressure specification PN for hand-operated
shut-off valves applies to the design
factor 1,5 (according DIN 3230 T5
and ISO 5208).

Caution!
Please note the admissible
pressure ratings for the
EO-tube ends.

DVAE
EO tube end ⇐ male BSPP

DVAA
male BSPP ⇐ EO tube end

DV-valves with male

BSPP thread on request.

*Indicate type of water

or additive if any

X1) Hand wheel: material: Polyamid

X2) Spindle: material: Brass 2.0401
X3) Stuffing boxpacking: PTFE (e. g. Teflon) Compound
X4) Haed piece: material: Brass 2.0401
X5) Sealing: O-ring NBR (e. g. Perbunan)
X6) Casing: material: Brass 2.0340.02
X7) Valve cone: material: Brass 2.0401
X8) Shut-off sealing: NBR (e. g. Perbunan)
X9) Male stud fitting: material: Brass 2.0540
X10) Sealing: Eolastic-sealing NBR (e. g. Perbunan)

D1 PN (bar)1)

Series 5 T1 DN D3 L1 L2 L3 L4 L5 S1 S2 S3
Weight
g/1 piece Order code*
without
surface
L3) 06 M 12×1.5 5 50 102 88 63 7 117 22 21 14 313 DV06LX 10
08 M 14×1.5 6 50 102 88 63 7 117 22 21 17 305 DV08LX 10
10 M 16×1.5 8 50 104 90 63 7 119 22 21 19 308 DV10LX 10
12 M 18×1.5 10 50 104 90 63 7 119 22 21 22 304 DV12LX 10
15 M 22×1.5 12 50 107 93 65 8 123 27 25 27 426 DV15LX 10
18 M 26×1.5 16 50 109 94 67 8 126 27 25 32 434 DV18LX 10
22 M 30×2 20 60 123 108 67 8 140 32 32 36 670 DV22LX 10
28 M 36×2 25 60 140 125 95 10 158 41 38 41 1030 DV28LX 10
35 M 45×2 32 70 166 145 102 10 188 50 47 50 1640 DV35LX 10
1
) Pressure shown = item deliverable
3
) L = light series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7. Order code suffixes
Material Suffix Example Standard
surface sealing material
and material (no additional.
*Please add the suffixes suffix needed)
below according to the material/
Brass 2.0340.02 without DV06LX PTFE / NBR
surface required.

O34 Catalogue 4100-5/UK

CD home

Valves

LD Shut-off valve PN 40
EO 24° cone end / EO 24° cone end
(with internal threaded spindle)
For hydraulic oil, mineral, oil, fuel oil, Diesel, water* etc. Temperature up to 150°C. For steam up to 10 bar.
For compressed air up to 35 bar on request. CS DIN 86501 Rg.-N.

The pressure specification PN for hand-operated

shut-off valves applies to the design
factor 1,5 (according DIN 3230 T5
and ISO 5208).

Caution!
Please note the admissible
pressure ratings for the
EO-tube ends.

EO-tube connection:
for copper tubes nuts, cutting and locking rings of
X1) Hand wheel: Plastic material typ 74 according to DIN 388 Form C brass
X2) Spindle: with internal thread. Material: Cu Zn 35 Ni 2
X3) Stuffing box packing: Graphite Attention:
X4) Head piece: material: Cu Zn 39 Pb 3 for steel tubes: nuts, progressive rings of steel
X5) Sealing: Copper ring specify when ordering
X6) Locking plates: material: St. 37/zinc plated We recommend pre-installation in hardened pre-
X7) Valve cone: loose tip material: Cu Zn 35 Ni 2 installation body (see assembly instructions)
X8) Casing: material: G-Cu Sn 5Zn Pb (Rg 5 according to DIN 1705)

D1 PN (bar)1)

Series 5 T1 DN D3 L1 L2 L3 L4 L5 S1
Weight
g/1 piece Order code*
without
surface
S4 ) 10 M18×1.5 6 63 60 45 98 7 77 22 383 LD10SX 40
12
14
M20×1.5
M22×1,5
8
10
63
63
64
70
49
54
98
98
7
7
81
89
24
27
401
417
LD12SX
LD14SX
40
40 O
16 M24×1.5 12 80 84 67 110 9 103 30 631 LD16SX 40
20 M30×2 16 80 90 69 110 9 112 36 688 LD20SX 40
25 M36×2 20 100 110 86 129 12 134 46 1191 LD25SX 40
30 M42×2 25 100 120 93 129 12 146 50 1322 LD30SX 40
38 M52×2 32 100 140 108 158 12 169 60 2268 LD38SX 40
1
) Pressure shown = item deliverable
4
) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Order code suffixes
Material Suffix Example Standard
surface sealing material
and material (no additional.
*Please add the suffixes suffix needed)
below according to the material/
Gunmetal (Rg 5) 2.1096 without LD10SX Graphit / Metal
surface required.

O35 Catalogue 4100-5/UK

CD home

Valves

WV Alternating valve
EO 24° cone end / EO 24° cone end / EQ 24° cone end
These valves permit the passage of flow from either inlet 1 or 2 to the outlet port whilst shutting of the inlet port not in use.
The shutting off, of an inlet is achieved by a floating ball bearing which moves by the pressure of the flow.

Material: steel Directions of flow:

Surface finish: Zinc plated and yellow chromated (A3C).
D1 → D3 = D2 closed
Valves are not recommended for cmpressed air and gases.
D2 → D3 = D1 closed
WV-valves are not to be used in connection with weld nipples, swivel nuts
etc. where there is no contact with a shoulder stop in the inner cone.
Temperature range without pressure reductions: –40°C up to +120°C.
Recommended fitting position as shown in the picture.
Leakage rate for alternating valves (hydraulic test with test pressure = Pmax:
approx. 20 drops (test period of 1 minute).

D1 PN (bar)1)

Series 5 T1 DN L1 L2 L3 S1 S2
Weight
g/1 piece Order code* CF A3C
L3) 8 M 14×1.5 4,5 21 14 29 14 17 53 WV08LOMD 160 160
10 M 16×1.5 6,0 22 15 30 17 19 73 WV10LOMD 160 160
12 M 18×1.5 7,5 24 17 32 19 22 96 WV12LOMD 160 160
15 M 22×1.5 10,0 28 21 36 19 27 134 WV15LOMD 160 160
1
) Pressure shown = item deliverable
3
) L = light series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
suffix needed)
Steel, zinc plated.,
chrome6-free CF WV08LOMDCF Steel ball
*Please add the suffixes
Steel, zinc A3C
below according to the material/
yellow plated WV08LOMDA3C Steel ball
surface required.

O36 Catalogue 4100-5/UK

CD home

Valves

KH 2-way ball valve steel

EO 24° cone end / EO 24° cone end

D1 PN (bar)1)

Series 5 DN L1 L2 L3 L4 L5 L6 L7 S1 S2 S3 S4
Weight
g/1 piece Order code* bronzed
L3) 06 4 67 53 10.0 25 55.0 76 82 19 7 20 14 195 KH06LX 500
08 6 67 53 10.0 25 55.0 76 82 19 7 20 17 190 KH08LX 500
10 8 75 61 14.5 35 68.0 100 90 24 8 30 19 420 KH10LX 500
12 10 75 61 14.5 35 68.0 100 90 24 8 30 22 410 KH12LX 500
15 12 83 69 17.0 40 92.0 112 99 30 10 35 27 631 KH15LX 500
18 16 82 67 20.0 45 105.0 166 99 36 11 45 32 850 KH18LX 400
22 20 99 84 24.0 55 113.0 187 116 41 14 45 36 1210 KH22LX 400
28 25 108 93 26.0 60 118.0 187 126 50 14 55 41 1750 KH28LX 400
35 25 116 95 26.0 60 118.0 187 138 50 14 55 50 1820 KH35LXDN25 400
35 32 121 100 36.5 80 180.5 320 143 60 17 73 50 3158 KH35LX 315
42 25 121 99 26.0 60 118.0 187 144 55 14 55 60 1940 KH42LXDN25 400
42 40 118 96 42.5 90 190.5 320 141 70 17 85 60 3788 KH42LX 315
S4 ) 08 4 73 59 10.0 25 55.0 76 88 19 7 20 19 214 KH08SX 500
10
12
6
8
73
77
58
62
10.0
14.5
25
35
55.0
68.0
76
100
90
94
19
24
7
8
20
30
22
24
220
430
KH10SX
KH12SX
500
500 O
14 10 81 65 14.5 35 68.0 100 100 24 8 30 27 440 KH14SX 500
16 12 87 70 17.0 40 92.0 112 106 30 10 35 30 649 KH16SX 500
20 16 90 69 20.0 45 105.0 166 112 36 11 45 36 900 KH20SX 400
25 20 107 83 24.0 55 113.0 187 131 41 14 45 46 1290 KH25SX 400
30 25 120 93 26.0 60 118.0 187 146 50 14 55 50 1880 KH30SX 400
38 25 134 102 26.0 60 118.0 187 163 55 14 55 60 1950 KH38SXDN25 400
38 32 127 95 36.5 80 180.5 320 156 60 17 73 60 3266 KH38SX 315
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete Order code suffixes
fittings or alternative sealing materials see page I7. Material Suffix Example Standard
surface sealing material
and material (no additional.
*Please add the suffixes suffix needed)
below according to the material/
Steel, bronzed DIN 50938-FE//A/T4 KH06LX POM / NBR
surface required.

O37 Catalogue 4100-5/UK

CD home

Valves

KH 2-way ball valve stainless steel

EO 24° cone end / EO 24° cone end

D1 PN (bar)1)

Series 5 DN L1 L2 L3 L4 L5 L6 L7 S1 S2 S3 S4
Weight
g/1 piece Order code* 71
3
L) 06 4 73 59 13.7 30.0 55 76 88 22 7 30 14 383 KH06L71X 500
08 6 73 59 13.7 30.0 55 76 88 22 7 30 17 381 KH08L71X 500
10 8 87 73 18.0 40.0 85 130 102 30 8 40 19 809 KH10L71X 500
12 10 87 73 18.0 40.0 85 130 102 30 8 40 22 821 KH12L71X 500
15 12 91 77 21.0 45.0 90 130 107 32 10 45 27 1020 KH15L71X 500
18 16 91 76 21.0 45.0 90 130 108 32 10 45 32 1037 KH18L71X 500
22 20 102 87 26.0 60.0 103 187 119 46 14 50 36 1610 KH22L71X 315
28 25 107 92 28.0 65.0 108 187 125 50 14 55 41 2032 KH28L71X 315
35 32 126 105 45.0 93.2 174 320 148 70 19 100 50 4780 KH35L71X 420
42 40 136 114 52.5 104.4 185 320 159 80 19 110 60 7754 KH42L71X 420
S4) 08 4 76 62 13.7 30.0 55 76 91 22 7 30 19 392 KH08S71X 500
10 6 76 61 13.7 30.0 55 76 93 22 7 30 22 460 KH10S71X 500
12 8 89 74 18.0 40.0 85 130 106 30 8 40 24 840 KH12S71X 500
14 10 93 77 18.0 40.0 85 130 112 30 8 40 27 847 KH14S71X 500
16 12 96 79 21.0 45.0 90 130 115 32 10 45 30 1055 KH16S71X 500
20 16 99 78 21.0 45.0 90 130 121 32 10 45 36 1079 KH20S71X 500
25 20 110 86 26.0 60.0 103 187 134 46 14 50 46 1720 KH25S71X 315
30 25 120 93 28.0 65.0 108 187 146 50 14 55 50 2150 KH30S71X 315
38 32 132 100 45.0 93.2 174 320 161 70 19 100 60 6066 KH38S71X 420
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
PN (bar)
= PN (MPa)
10
Order code suffixes
Delivery without nut and ring. Information on ordering complete
Material Suffix Example Standard
fittings or alternative sealing materials see page I7.
surface sealing material
and material (no additional.
*Please add the suffixes suffix needed)
below according to the material/
Stainless Steel without KH06L71X POM / NBR
surface required.

O38 Catalogue 4100-5/UK

CD home

Valves

KH 2-way BSPP ball valve steel

Female BSPP thread (ISO 1179-1) / Female BSPP thread (ISO 1179-1)

Weight PN (bar)1)
T1 DN L1 L2 L3 L4 L5 L6 L7 L8 S1 S2 S3 g/1 piece Order code* 71
G 1/8 4 69 36 12 10.0 25 55.0 76 – 19 7 20 220 KH1/8X 500
G 1/4 6 69 36 12 10.0 25 55.0 76 – 19 7 20 210 KH1/4X 500
G 3/8 10 73 45 14 14.5 35 68.0 100 – 24 8 30 430 KH3/8X 500
G 1/2 12 82 51 15 17.0 40 92.0 112 – 30 10 35 670 KH1/2X 500
G 5/8 16 88 50 18 20.0 45 105.0 166 – 36 11 45 973 KH5/8X 400
G 3/4 20 93 60 18 24.0 55 113.0 187 – 41 14 45 1280 KH3/4X 400
G1 25 113 70 20 26.0 60 118.0 187 – 50 14 55 1982 KH1X 400
G 1 1/4 32 110 70 20 36.5 80 180.5 320 58.5 60 17 73 2620 KH11/4X 315
G 1 1/4 25 134 70 20 26.0 60 118.0 187 – 50 14 55 2066 KH11/4DN25X 400
G 1 1/2 40 114 75 22 42.5 90 190.5 320 57.0 70 17 85 3989 KH11/2X 315
G 1 1/2 25 139 70 22 26.0 60 118.0 187 – 55 14 55 2200 KH11/2DN25X 400
1
) Pressure shown = item deliverable
O
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
*Please add the suffixes suffix needed)
below according to the material/
Steel, bronzed DIN 50938-FE//A/T4 KH1/8X POM / NBR
surface required.

O39 Catalogue 4100-5/UK

CD home

Valves

KH 2-way BSPP ball valve stainless steel

Female BSPP thread (ISO 1179-1) / Female BSPP thread (ISO 1179-1)

Weight PN (bar)1)
T1 DN L1 L2 L3 L4 L5 L6 L7 L8 S1 S2 S3 g/1 piece Order code* 71
G 1/8 4 69 41 11 13.7 30.0 55 76 – 22 7 30 421 KH1/871x 500
G 1/4 6 75 41 14 13.7 30.0 55 76 – 22 7 30 422 KH1/471x 500
G 3/8 10 86 53 14 18.0 40.0 85 130 – 30 8 40 891 KH3/871x 500
G 1/2 12 92 55 16 21.0 45.0 90 130 – 32 10 45 1093 KH1/271x 500
G 3/4 20 102 62 18 26.0 60.0 103 187 – 46 14 50 1944 KH3/471x 315
G1 25 112 67 20 28.0 65.0 108 187 – 50 14 55 2200 KH171x 315
G 1 1/4 32 116 86 24 45.0 93.2 174 320 58 70 19 100 5300 KH11/471x 420
G 1 1/2 40 120 92 26 52.2 104.5 185 320 60 80 19 110 7230 KH11/271x 420
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
*Please add the suffixes suffix needed)
below according to the material/
Stainless Steel without KH1/871X POM / NBR
surface required.

O40 Catalogue 4100-5/UK

CD home

Valves

KH 2-way NPT ball valve steel

Female NPT thread (SAE 476) / Female NPT thread (SAE 476)

Weight PN (bar)1)
T1 DN L1 L2 L3 L4 L5 L6 L7 L8 S1 S2 S3 g/1 piece Order code* bronzed
1/8-27 NPT 4 69 36 7.0 10.0 25 55.0 76 19 7 20 225 KH1/8NPTX 500
1/4-18 NPT 6 69 36 10.0 10.0 25 55.0 76 19 7 20 210 KH1/4NPTX 500
3/8-18 NPT 10 73 45 10.4 14.5 35 68.0 100 24 8 30 430 KH3/8NPTX 500
1/2-14 NPT 12 82 51 13.6 17.0 40 92.0 112 30 10 35 670 KH1/2NPTX 500
3/4-14 NPT 20 93 60 14.0 24.0 55 113.0 187 41 14 45 1280 KH3/4NPTX 400
1-11 1/2 NPT 25 113 70 16.8 26.0 60 118.0 187 50 14 55 1970 KH1NPTX 400
1 1/4-11 1/2 NPT 32 110 70 17.3 36.5 80 180.5 320 58.5 60 17 73 3074 KH11/4NPTX 315
1 1/2-11 1/2 NPT 40 114 75 17.3 42.5 90 190.5 320 57.0 70 17 85 3976 KH11/2NPTX 315
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
*Please add the suffixes suffix needed)
below according to the material/
Steel, bronzed DIN 50938-FE//A/T4 KH1/8NPTX POM / NBR
surface required.

O41 Catalogue 4100-5/UK

CD home

Valves

KH 2-way NPT ball valve stainless steel

Female NPT thread (SAE 476) / Female NPT thread (SAE 476)

Weight PN (bar)1)
T1 DN L1 L2 L3 L4 L5 L6 L7 L8 S1 S2 S3 g/1 piece Order code* bronzed
1/8-27 NPT 4 72 41 6.9 13.7 30.0 55 76 22 7 30 461 KH1/8NPT71X 500
1/4-18 NPT 6 82 41 10.0 13.7 30.0 55 76 22 7 30 441 KH1/4NPT71X 500
3/8-18 NPT 10 95 53 10.3 18.0 40.0 85 130 30 8 40 943 KH3/8NPT71X 500
1/2-14 NPT 12 108 55 13.6 21.0 45.0 90 130 32 10 45 1177 KH1/2NPT71X 500
3/4-14 NPT 20 112 62 14.1 26.0 60.0 103 187 46 14 50 2054 KH3/4NPT71X 315
1-11 1/2 NPT 25 126 67 16.8 28.0 65.0 108 187 50 14 55 2451 KH1NPT71X 315
11/4-11 1/2 NPT 32 116 86 17.3 45.0 93.2 174 320 58 70 18 100 5300 KH11/4NPT71X 420
11/2-11 1/2 NPT 40 120 92 17.3 52.2 104.4 185 320 60 80 19 110 7230 KH11/2NPT71X 420
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
*Please add the suffixes suffix needed)
below according to the material/
Steel, bronzed DIN 50938-FE//A/T4 KH1/8NPT71X POM / NBR
surface required.

O42 Catalogue 4100-5/UK

CD home

Valves

KH 3-way compact ball valve steel

EO 24° cone end / EO 24° cone end / EO 24° cone end

3 1
2

L-Version
D1 PN (bar)1)

Series 5 DN L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 S1 S2 S3 S4
Weight
g/1 piece Order code* bronzed
3
L) 06 4 67 53 15.0 30 59.5 76 33.5 26.5 82 41.0 19 7 30 14 317 KH3/2-06LX 500
08 6 67 53 15.0 30 59.5 76 33.5 26.5 82 41.0 19 7 30 17 214 KH3/2-08LX 500
10 8 75 61 14.5 35 67.5 100 37.5 30.5 90 45.0 24 8 40 19 445 KH3/2-10LX 500
12 10 75 61 14.5 35 67.5 100 37.5 30.5 90 45.0 24 8 40 22 537 KH3/2-12LX 500
15 12 83 69 22.0 45 96.5 112 41.5 34.5 99 49.5 30 10 45 27 678 KH3/2-15LX 500
18 16 82 67 25.0 50 110.0 166 41 33.5 99 49.5 36 11 50 32 850 KH3/2-18LX 400
22 20 99 84 29.0 60 126.0 187 49.5 42.0 116 58.0 41 14 55 36 1340 KH3/2-22LX 400
28 25 108 93 31.0 65 131.0 187 54 46.5 126 63.0 50 14 65 41 2274 KH3/2-28LX 400
S4 ) 08 4 73 59 15.0 20 59.5 76 36.5 29.5 88 44.0 19 7 30 19 350 KH3/2-08SX 500
10
12
6
8
73
77
58
62
15.0
14.5
30
35
59.5
67.5
76
100
36.5
38.5
29.0
31.0
90
94
45.0
47.0
19
24
7
8
30
40
22
24
300
469
KH3/2-10SX
KH3/2-12SX
500
500
O
14 10 81 65 14.5 35 67.5 100 40.5 32.5 100 50.0 24 8 40 27 500 KH3/2-14SX 500
16 12 87 70 22.0 45 96.5 112 43.5 35.0 106 53.0 30 10 45 30 909 KH3/2-16SX 500
20 16 90 69 25.0 50 110.0 166 45 34.5 112 56.0 36 11 50 36 949 KH3/2-20SX 400
25 20 107 83 29.0 60 126.0 187 53.5 41.5 131 65.5 41 14 55 46 1714 KH3/2-25SX 400
30 25 120 93 31.0 65 131.0 187 60 46.5 146 73.0 50 14 65 50 2462 KH3/2-30SX 400
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Order code suffixes
Material Suffix Example Standard
surfa ce sealing material
and material (no additional.
*Please add the suffixes suffix needed)
below according to the material/
Steel, bronzed DIN 50938-FE//A/T4 KH3/2-06LX POM / NBR
surface required.

O43 Catalogue 4100-5/UK

CD home

Valves

KH 3-way compact BSPP ball valve steel

Female BSPP thread (ISO 1179-1) / Female BSPP thread (ISO 1179-1) /
Female BSPP thread (ISO 1179-1)

Weight PN (bar)1)
T1 DN L1 L2 L3 L4 L5 L6 L7 L8 S1 S2 S3 g/1 piece Order code* bronzed
G 1/8 4 69 36 12 15.0 30 55 76 34.5 19 7 30 270 KH3/2-1/8X 500
G 1/4 6 69 36 12 15.0 30 55 76 34.5 19 7 30 342 KH3/2-1/4X 500
G 3/8 10 73 45 14 14.5 35 68 100 36.5 24 8 40 563 KH3/2-3/8X 500
G 1/2 12 82 51 15 22.0 45 92 112 41.0 30 10 45 932 KH3/2-1/2X 500
G 3/4 20 93 60 18 29.0 60 113 187 48.0 41 14 55 1724 KH3/2-3/4X 400
G1 25 118 70 20 31.0 65 118 187 56.5 50 14 65 2643 KH3/2-1X 400
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
3 1
2

L-Version

Order code suffixes

Material Suffix Example Standard
surface sealing material
and material (no additional.
*Please add the suffixes suffix needed)
below according to the material/
Steel, bronzed DIN 50938-FE//A/T4 KH3/2-1/8X POM / NBR
surface required.

O44 Catalogue 4100-5/UK

CD home

Valves

ELA air-bleed valves

Hydraulic systems can effectively be bled with ELA air-bleed valves.

Easily installed – maintenance-free – almost unlimited service life – simple – safe – reliable – efficient. The
system can be operated immediately. No control irregularities due to air contamination of the pressure medium.
Cost saving, as non-productive de-aeration time is saved.

Air bleed between: – opening pressure 0.05 bar

– closing pressure
0.5 bar

BEFORE BLEEDING AIR ESCAPES AIR REMOVED

System without pressure System operated System under pressure
(0,05 bar) (
0,5 bar)

The principle of the air-bleed valve is based on the differ- The air bleed valve should be connected vertical, at the
O
ence in behaviour of gases and liquids under pressure highest point of the hydraulic system or in places where
because of their dependence on viscosity. A piston, air accumulation may occur.
housed in the bore of the body with defined clearance, ef-
fects the opening and closing of the valve on start-up or ELA air-bleed valves are available only for mineral oil
shut-down of the system. On setting the system in opera- based fluids, and within the temperature limits of
tion, the accumulated air escapes until the liquid column of –20 °C to +90 °C.
the pressure medium reaches the piston. The pressure of
the liquid lifts the piston against the upper, high pressure
seal, securely closing the
air-vent (slight oil discharge may occur). When pressure is
released the spring releases the piston reopening the air-
vent, whereupon the procedure may be repeated.
The special piston design prevents any intake of air
in case of partial vacuum.

O45 Catalogue 4100-5/UK

CD home

Valves

ELA Air-bleed valves

Male BSPP thread with Eolastic seal
PN Dry Technology Weight
(bar) Steel g/1 piece ∅6
400 ELA1/4EDA3C 109

23

69,5
SW22

12
Eolastic
seal
G 1/4 A

EO Swivel
PN Dry Technology Weight
(bar) Steel g/1 piece ∅6
315 ELAE10LA3C 125
23

77,5

SW22

SW19
17

∅ 10 O-ring

M 16×1,5

O46 Catalogue 4100-5/UK