0% found this document useful (0 votes)
121 views45 pages

VCS-277.examsforall - Premium.exam.83q: Number: VCS-277 Passing Score: 800 Time Limit: 120 Min File Version: 1.0

This document contains a practice exam for the Veritas NetBackup 8.0 and NetBackup Appliances 3.0 certification. The exam contains 19 multiple choice questions covering topics like troubleshooting restore failures, diagnosing network issues, defining restore sources and destinations, storage unit types, log files, job management, replication errors, upgrade preparation steps, and policy settings.

Uploaded by

Mustapha ASSILA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
121 views45 pages

VCS-277.examsforall - Premium.exam.83q: Number: VCS-277 Passing Score: 800 Time Limit: 120 Min File Version: 1.0

This document contains a practice exam for the Veritas NetBackup 8.0 and NetBackup Appliances 3.0 certification. The exam contains 19 multiple choice questions covering topics like troubleshooting restore failures, diagnosing network issues, defining restore sources and destinations, storage unit types, log files, job management, replication errors, upgrade preparation steps, and policy settings.

Uploaded by

Mustapha ASSILA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 45

VCS-277.examsforall.premium.exam.

83q

Number: VCS-277
Passing Score: 800
Time Limit: 120 min
File Version: 1.0

VCS-277

Administration of Veritas NetBackup 8.0 and NetBackup Appliances 3.0

Version 1.0
Exam A

QUESTION 1
A restore has failed with the following job details:

Which two resources should the administrator use to troubleshoot this issue? (Select two.)

A. the bpmedia command


B. the robtest command
C. the operating system logs
D. the logs from the NetBackup tar process
E. the nbdevconfig command

Correct Answer: DE
Section: (none)
Explanation

Explanation/Reference:

QUESTION 2
An administrator observes intermittent connectivity issues between the appliance and clients.
Which NetBackup Appliance Shell Menu (CLISH) command can the administrator use to assist in diagnosing the problem?

A. Main_Menu > Support > DataCollect


B. Main_Manu > Support > NBDNA
C. Main_Menu > Support > iostat
D. Main_Menu > Network > Show Status

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference https://ashraflinux.wordpress.com/2016/07/01/manually-collecting-the-datacolect-logs-from-netbackup-appliance/

QUESTION 3
Where in the Backup, Archive, and Restore interface for Microsoft Windows can an administrator define the source and destination client for a restore job?

A. File > Select Files and Folders to Restore


B. File > NetBackup Client Properties > General
C. File > NetBackup Client Properties > Host Properties
D. File > Specify NetBackup Machines and Policy Type

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference: http://www.uni-jena.de/unijenamedia/NetBackup6_0_BAR_GS_Guide.pdf

QUESTION 4
Which two storage unit types can be configured in NetBackup? (Select two.)

A. Deduplication
B. NDMP
C. Robot
D. Media Manager
E. Tape

Correct Answer: BD
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000117525

QUESTION 5
NetBackup has frozen some of the tapes added to the robot.

Which log must be enabled to determine why the tapes were frozen?

A. ltid
B. robots
C. bptm
D. vmd

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:
Reference: https://vox.veritas.com/t5/NetBackup/Active-tapes-not-being-utilized/td-p/251695

QUESTION 6
An administrator has a master server running over 50,000 jobs per day.

What can the administrator do to reduce the load on the master server?

A. replicate the backups to another master server domain


B. configure a new master server to distribute the backup load
C. add additional media servers to the environment
D. configure client-side deduplication and load balancing media servers

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000076282

QUESTION 7
A backup image on tape is due to expire in one week. The administrator needs to keep the image available for restore indefinitely.

Which two methods can be used to accomplish this goal? (Select two.)

A. use the bpexpdate command to change the expiration date of the image
B. use the bpretlevel command to customize the retention level
C. use the bpmedia command to suspend the tape
D. use the bpduplicate command to create a copy with an infinite retention
E. use the vmchange command to set the tape to never expire

Correct Answer: AD
Section: (none)
Explanation

Explanation/Reference:

QUESTION 8
Using the default values in the activity monitor, a failed job is discovered among hundreds of jobs that ran during the evening. The administrator would like to
view all related jobs to verify they completed successfully.

Where in the activity monitor can the administrator find all related parent and child jobs?

A. right-click the failed job and select Sort, and sort by Job PID
B. double-click the failed job and select the Detailed Status tab
C. right-click the failed job and select View Job Hierarchy
D. right-click the failed job and select Troubleshooter

Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:

QUESTION 9
Upon arriving at work on Monday, an administrator sees several replication jobs that have failed with the following error message:

Which two reasons may be the cause for the error code? (Select two.)

A. The checkpoint restart is disabled for the replication jobs.


B. There are network connectivity issues between the source and target domains.
C. The NetBackup host ID-based certificate was revoked.
D. There is insufficient storage space on the target storage server.
E. There are insufficient tapes in the replication volume pool.

Correct Answer: DE
Section: (none)
Explanation

Explanation/Reference:

QUESTION 10
Which two tasks should an administrator perform prior to upgrading NetBackup Appliances to version 3.0? (Select two.)

A. obtain necessary third-party plug-ins


B. decrease the size of the configuration volume
C. reset the appliance user password to the default value
D. delete previously downloaded release updates, client packages, and client add-ons
E. use the Migration Utility to capture pre-upgrade settings within a NetBackup Catalog Backup

Correct Answer: AD
Section: (none)
Explanation

Explanation/Reference:
Reference: https://download.veritas.com/resources/content/live/SFDC/116000/000115653/en_US/NetBackup%2052xx%20and%205330%20Appliance%
20Upgrade%20Guide%20-%203.0.pdf?__gda__=1499823995_4324797945eed16ad451ff07320bd557
QUESTION 11
Which volume pool must be manually created in NetBackup?

A. None pool
B. DataStore pool
C. Scratch pool
D. CatalogBackup pool

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:
Reference: https://vox.veritas.com/t5/NetBackup/Use-of-Scratch-pool/td-p/387248

QUESTION 12
Which type of punctuation is used to separate multiple interface name entries in the Network > Show Properties [InterfaceNames] command in the
NetBackup Appliance Shell Menu (CLISH)?

A. colon
B. comma
C. hyphen
D. semicolon

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000115459

QUESTION 13
An administrator needs to decrease the total amount of time required to back up a UNIX file server, but requires a full backup every night recovery purposes.

How should the administrator proceed?

A. use policy compression


B. use NetBackup Accelerator
C. use change journal
D. use client-side deduplication

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:

QUESTION 14
Which two options are available to an administrator to bring the Media Server Deduplication Pool (MSDP) catalog back online in the case of a hardware problem
that cause corruption? (Select two.)

A. restore the MSDP catalog from the NetBackup catalog backup


B. recover the MSDP catalog from a MSDP catalog backup
C. repair the MSDP catalog using the crchk tool
D. restore the MSDP catalog from an MSDP catalogshadow copy
E. repair the MSDP catalog using the recoverCR tool

Correct Answer: BC
Section: (none)
Explanation

Explanation/Reference:

QUESTION 15
What is the purpose of the Logon and Password settings in the Disaster Recovery tab of a NetBackup catalog backup policy?

A. to specify credentials required to access a network share


B. to encrypt the NetBackup catalog backup data
C. to require credentials to perform a catalog recovery
D. to encrypt the disaster recovery file

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.v42545709_nbu_core_admin_web

QUESTION 16
A NetBackup environment with a single tape storage unit is experiencing performance issues when running full backups of a Windows file server with over a
million small files. Backups for all other clients on the same network are performing adequately.

What should the administrator modify to improve performance for the client?

A. enable Windows Change Journal


B. modify data buffer settings for the data path
C. enable the Use Accelerator policy attribute
D. use Flashbackup-Windows policy type

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:

QUESTION 17
An administrator is attempting to configure a new backup policy using synthetic backups. When creating a new full backup schedule, the Synthetic backup
option is unable to be selected.

What must the administrator do to the policy to make the Synthetic backup option available for selection?

A. create a differential or cumulative incremental backup schedule


B. select a backup destination that supports synthetic backups
C. enable Collect true image restore information with move detection
D. create a full backup schedule with Accelerator forced rescan enabled

Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://vox.veritas.com/t5/NetBackup/Synthetic-Backups-block-grayed-out/td-p/600262

QUESTION 18
Which command should an administrator run on each appliance as part of completing the pre-upgrade tasks?

A. Support > Cleanup


B. Manage > List Downloaded
C. Support > Test Software
D. Manage > NetBackupCLI > List

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000095813

QUESTION 19
Refer to the exhibit.
What is the outcome of the policy shown in the exhibit?

A. The client encrypts then compresses the data before sending it to the media server.
B. The client compresses and the media server encrypts the data before sending it to the tape drive.
C. The client compresses then encrypts the data before sending it to the media server.
D. The client sends the data to the media server, which compresses and then encrypts the data

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:

QUESTION 20
An administrator wants deduplication clients in a remote office to perform backups so that less data is sent over the wide area network (WAN).
Which action should the administrator perform to reduce the total amount of data sent over the WAN?

A. set client attributes to Always use the media server


B. set client attributes to Always use client-side deduplication
C. set the deduplication disk pool to Limit I/O streams
D. enable deduplication stream handlers for the clients

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:

QUESTION 21
Which information is validated during an image verification operation?

A. data on the master server is validated with data in the NetBackup catalog
B. data on the client is validated with data in the NetBackup catalog
C. data on the backup storage is validated with data in the NetBackup catalog
D. data on the client and the backup storage is validated with data in the NetBackup catalog

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:

QUESTION 22
An administrator notices that backups are failing for clients added to a new backup policy. The backups attempt to run again after 10 minutes.

How can the administrator modify the time between backup attempts?

A. modify the Job retry delay host property


B. modify the Policy update interval host property
C. modify the Schedule backup attempts host property
D. modify the Take checkpoint every value in the backup policy

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:

QUESTION 23
Which feature is enabled after adding a master server to the Trusted Master Servers tab?

A. backup of clients in other master server domains


B. remote console to another master server
C. targeted Auto Image Replication
D. remote catalog backups

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:

QUESTION 24
An administrator has a backup policy with the following policy attributes:

3 paths listed in the Backup Selections list


5 clients listed in the Clients list
Allow multiple data streams is selected
Limit jobs per policy is set to 4

How many jobs go Active when the job is started, excluding parent jobs, assuming there are enough storage resources to handle the expected jobs?

A. 3
B. 4
C. 12
D. 15
Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:

QUESTION 25
An AdvancedDisk storage unit consistently reaches capacity, causing older, staged backups to expire.

How can the administrator control the prioritization of images that get removed?

A. change the priority for secondary storage lifecycle operations


B. use Data Classification
C. change the priority of relocation jobs in the staging schedule
D. modify Retention Levels

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:

QUESTION 26
Refer to the exhibit.

A backup policy uses a Full Backup schedule with a schedule type of Frequency: 1 days. The start window for the schedule is configured as shown in the
exhibit:
The administrator runs a manual backup at 10:00 on Thursday.

When would the next backup run, if all prior backups completed successfully?

A. Friday at 2:00
B. Friday at 10:00
C. Monday at 2:00
D. Monday at 10:00

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:

QUESTION 27
Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH), under Settings > Security >
Authentication, to configure and manage Network Information Service (NIS) user registration?

A. LDAP
B. ActiveDirectory
C. Kerberos
D. LocalUser

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000115505

QUESTION 28
An administrator needs to recover the NetBackup master server catalog at a disaster recovery site, but the DR files are unavailable.

Which command should the administrator use to recreate the DR file?

A. bprecover
B. nbcatsync
C. bpimport
D. cat_import

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000064623

QUESTION 29
VMware type backups of a newly added Windows Server 2008 guest virtual machine are failing with the following status:

The associated bpfis process log indicates that the attempt to quiesce this virtual machine failed.

Which two steps should the administrator perform to resolve the issue? (Select two.)

A. enable VMware Tools in the virtual machine


B. disable Block-Level Incremental Backup in the policy
C. install the NetBackup plug-in for vSphere Web Client on the guest virtual machine
D. confirm Microsoft Volume Shadow Copy Service within the guest virtual machine is performing properly
E. ensure the virtual machine display name contains ASCII characters

Correct Answer: CD
Section: (none)
Explanation

Explanation/Reference:

QUESTION 30
Which action is performed by the NetBackup deduplication plug-in?

A. writing data segments into the MSDP containers


B. processing MSDP transaction logs
C. performing file fingerprinting actions
D. performing queue processing

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference: http://itdoc.hitachi.co.jp/manuals/oem/veritas/JP1V101VERINBU02500/NetBackup7.6_Dedupe_Guide_e.PDF

QUESTION 31
A NetBackup master server has commenced writing four long-running duplication jobs to an AdvancedDisk disk pool. The value of Maximum concurrent jobs
for the storage unit and Limit I/O streams for the disk pool are both set to 4.

There are 35 jobs queued on the master server that require this disk pool:
5 replication jobs with priority 9999
10 backup jobs with priority 999
20 duplication jobs with priority 99

Two restore jobs that require this disk pool are then submitted with a default priority.

Which job type goes active next?

A. Backup
B. Duplication
C. Replication
D. Restore
Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:

QUESTION 32
An administrator has a job that has failed. See the contents of the job’s Detailed Status tab from the NetBackup Administration Console Activity Monitor
provided below:
What may be the cause for the failure?

A. The version of NetBackup installed on the master server and media server is higher than the version installed on the client.
B. The media server is unable to resolve the hostname of the client to any IP address.
C. The required NetBackup processes need to be started on the client.
D. The media server failed to perform a reverse name lookup of the IP address associated with the client.

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:

QUESTION 33
An administrator has a scheduled policy that backs up 20 clients, each with multiple mount points and multiple data streams enabled. One of the jobs has failed
and is in an Incomplete state in the Activity Monitor.

How should the administrator verify the incomplete job runs prior to the next scheduled backup?

A. run a manual job for the client


B. resume the job
C. run a manual job for the mount point
D. resume the parent job

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:

QUESTION 34
A NetBackup environment suffers from intermittent network outages between the Media Server Deduplication Pool (MSDP) media server and clients during the
backup window. The results in multiple backup failures.

How should an administrator overcome the backup failure issue?

A. enable Network Resiliency


B. configure client-side deduplication
C. increase the client connect timeout
D. increase the CR_STATS_TIMER interval

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:

QUESTION 35
Which event can cause a NetBackup appliance to proactively shut down?

A. multiple disk failures that may put data at risk


B. a fan failure
C. RAID battery backup failure
D. power supply input voltage overload

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:

QUESTION 36
An administrator needs to prevent users on all client systems from performing user-directed restores while ensuring they are able to view the contents of all
previous backup images.

What should the administrator configure to accomplish this goal?

A. remove the client from the Restore Failover list in the master server host properties
B. modify the auth.conf file on the master server to exclude the line:
* ADMIN=JBP=ENDUSER+BU+ARC
C. de-select the Allow server file writes parameter in the master server host properties
D. de-select the Allow client restore parameter in the master server host properties
Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:

QUESTION 37
An administrator has a backup for client Linux1 using the LinuxClients policy complete successfully. Even though the policy Backup Selections are NOT
modified, the backup job fails the next day with the following status code:

What is a possible reason the job failed?

A. The Enable granular recovery option was unset.


B. The client was added to another backup policy.
C. The file systems have been unmounted on the client.
D. The client was temporarily shut down.

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:

QUESTION 38
An administrator needs to store secure tape copies of protected data to an offsite location.

How can the administrator automatically eject tape media daily and create detailed reports?

A. encrypt the tapes using software encryption and use a storage lifecycle policy to perform automatic ejects and create reports
B. enable the encryption attribute on the vault policy to perform automated ejects and create reports
C. use tape drives that support hardware encryption and use a vault policy to perform automated ejects and create reports
D. use tape drives that support hardware encryption and use a storage lifecycle policy to perform automated ejects and create reports

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:

QUESTION 39
Refer to the exhibit.

The following storage lifecycle policy was used to back up data from a client. All duplication jobs have completed, and none of the backups have expired.

How should an administrator restore data from the tape using NetBackup?

A. from the BAR console, select the tape backup to restore from
B. from the NetBackup Administration Console, promote copy 1 to the primary copy
C. from the NetBackup Administration Console, promote copy 2 to the primary copy
D. from the NetBackup Administration Console, promote copy 3 to the primary copy

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:

QUESTION 40
Which two performance scenarios benefit from seeding the MSDP pool? (Select two.)
A. new client backups over WAN
B. new application backups over SAN
C. new VADP VMware backups using media server as the backup host
D. new replication to a new DR site
E. new clients with large file systems containing small files

Correct Answer: AE
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.v71187860_nbu-msdp-web-deliverable

QUESTION 41
A Windows policy protects over 100 servers using the directive ALL_LOCAL_DRIVES. The backup window for this policy is a two-hour window that is unused by
any other policy. When the jobs run, each server has no more than ten paths, and the overall performance of the disk storage unit is degraded.

Which setting should the administrator modify to ensure only ten jobs write concurrently to the disk storage unit during the backup window?

A. set the Allow multiple data streams policy attribute


B. enable the Limit Jobs per policy attribute
C. set the Maximum jobs per client host property
D. enable multiplexing for the storage unit and set the value

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.DOC2799

QUESTION 42
Veritas recommends that TLS (Transport Layer Security) be enabled for security purposes when using appliance syslog forwarding.

Which step must the administrator perform first to upload the certificate files which are required for TLS Anonymous Authentication configuration?

A. copy the certificate and private key files: ca-server.pem, nba-rsyslog.pem and nba-rsyslog.key to a non-appliance location
B. run Settings > LogForwarding Share Open to open NFS and CIFS shares on the appliance
C. mount an NFS or a CIFS share to appliance_name/inst/logforwarding on the server where the certificates reside
D. upload the certificate and private key files to /inst/logforwarding

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000117153

QUESTION 43
After creating a NBU-Catalog type backup policy, an administrator receives the following message:

Which two options are available to an administrator to ensure the DR file is available for future use? (Select two.)

A. ensure the folder DR file is on a non-root volume


B. ensure the DR file is created on a volume other than the NetBackup volume
C. ensure the NetBackup catalog is on a non-root volume
D. configure a valid email address of the administrator in the Send email option
E. configure Auto Image Replication to send the DR file to a remote master server

Correct Answer: BC
Section: (none)
Explanation

Explanation/Reference:

QUESTION 44
Which type of backup schedules are available when using the After each backup session schedule type for an NBU-Catalog policy type?

A. Full
B. Differential Incremental
C. Vault Catalog Backup
D. Application Backup
Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:
Reference: http://systemmanager.ru/nbadmin.en/ch31s03s01s01.htm

QUESTION 45
A new storage shelf is added to an existing appliance.

Which command under Manage > Storage must the administrator perform first after a new shelf is connected to the appliance and the appliance is powered
on?

A. Add operation to add a new disk


B. Scan operation to scan for new storage
C. Resize operation to resize the data partitions
D. Edit operation to edit the data partitions

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference: https://vox.veritas.com/t5/NetBackup/Netbackup-appliance-New-disk-shelf-Add/td-p/756083

QUESTION 46
Which command should an administrator use to generate a list of all files backed up on a client for a specific backup job?

A. bpimage
B. bplist
C. bpimagelist
D. bpdbjobs

Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:

QUESTION 47
An administrator has a job that has failed. Upon reviewing the Detailed Status tab for the job, the administrator sees the following information:

Which setting value prevented the job from running during the backup window?

A. the Global Attributes > Maximum jobs per client master server host property
B. the Timeout > Client read timeout master server host property
C. the Maximum concurrent jobs storage unit setting
D. the Limit jobs per policy policy setting

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference: https://vox.veritas.com/t5/NetBackup/196-because-limit-has-been-reached-for-requested-resource/td-p/769711

QUESTION 48
Which configuration file should and administrator modify to seed the local fingerprint caching configuration on a NetBackup MSDP client?

A. spa.cfg
B. pd.conf
C. contentrouter.cfg
D. agent.cfg

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:
Reference: http://itdoc.hitachi.co.jp/manuals/oem/veritas/JP1V110VERINBU04700/NetBackup7.7.1_Dedupe_Guide_e.PDF (page 178)

QUESTION 49
Which user account(s) is allowed remote login access directly to the NetBackup Appliance Shell Menu (CLISH)?

A. admin
B. NetBackupCLI users
C. admin and root
D. admin and NetBackupCLI users

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000115385

QUESTION 50
An administrator is preparing to perform disaster recovery for many clients whose backups are stored on multiplexed tapes.

Which host property should the administrator modify, prior to the restores, to ensure the best recovery time?

A. set Enable unrestricted media sharing for all media servers


B. increase Restore retires
C. increase Delay on multiplexed restores
D. add the client IP addresses to Resilient Networks

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:
QUESTION 51
Which schedule can be configured as a synthetic backup in addition to the full backup schedule type?

A. Differential incremental backup


B. Cumulative incremental backup
C. User backups
D. Automatic backup

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:

QUESTION 52
Which two NetBackup features are available to protect the Media Server Deduplication Pool (MSDP) catalog? (Select two.)

A. NetBackup catalog backups


B. MSDP catalog policy
C. Optimized Catalog Duplication
D. MSDP shadow copies
E. Checkpoint

Correct Answer: AD
Section: (none)
Explanation

Explanation/Reference:
Reference https://www.veritas.com/support/en_US/article.v100016542_nbu-msdp-web-deliverable

QUESTION 53
Which two restore types must be initiated from a client system rather than the NetBackup Administration Console on the master server? (Select two.)

A. Oracle
B. MS-SharePoint
C. MS-Exchange
D. MS-SQL-Server
E. VMware

Correct Answer: CD
Section: (none)
Explanation

Explanation/Reference:
Reference https://www.veritas.com/support/en_US/article.000081333

QUESTION 54
Storage lifecycle policy SLP1 is used to perform a backup and duplication. The backup is always a small, 100MB backup. The master server host properties for
SLP Parameters are set to the default values.

How can the administrator ensure the duplications run as soon as possible after the backup completes?

A. reduce the Job submission interval setting to 0


B. reduce the Minimum size per duplication job setting to 50 MB
C. right-click SLP1 and select Manual Relocation to Final Destination
D. increase the Priority for secondary operations in the SLP

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:

QUESTION 55
An administrator has downloaded a patch from the NetBackup appliance support website to a Windows client. The administrator plans to move the patch to the
appliance through a file share. Accessing the \\<appliance-name>\incoming patches folder from the Windows client fails.

Which action should the administrator perform?

A. login to Windows as a NetBackupCLI user


B. manually map the share using the local Windows credentials
C. use the Share Open command in the NetBackup Appliance Shell Menu
D. use the cat (Unix) command to join the split tar files
Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:
Reference https://www.veritas.com/support/en_US/article.000095813

QUESTION 56
In which scenario is Use Accelerator unavailable in a backup policy?

A. for VMware virtual machines with a Linux guest OS


B. for virtual machines hosted on a Hyper-V Host using WMI
C. for a NetApp NDMP filer
D. for an Exchange database availability group (DAG)

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:

QUESTION 57
Which command can an administrator run to test and analyze connections between master servers, media servers, and clients for multiple NetBackup ports?

A. bperror
B. bpconfig
C. bpresolver
D. bptestnetconn

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:
Reference: https://download.veritas.com/resources/content/live/DOCUMENTATION/8000/DOC8605/en_US/
NetBackup77_Network_Ports_Reference_Guide.pdf?__gda__=1499998217_7a5254cd690116c179a03075be434917 (Page 8)
QUESTION 58
Which supported step should an administrator perform to ensure all operating system logs are sent from an appliance to a central logging server running Linux?

A. configure access to the appliance logs with the share open command
B. configure syslog forwarding in the appliance CLISH
C. configure syslog forwarding in OpsCenter
D. configure a cron job on the appliance to copy the logs

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:

QUESTION 59
Which interface is pre-configured with the 192.168.229.233 IP address in a NetBackup appliance?

A. lo
B. eth0
C. eth1
D. IPMI

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:
Reference: https://vox.veritas.com/t5/NetBackup-Appliance/Change-of-management-port-after-NBU-appliance-upgrade/td-p/703029

QUESTION 60
An administrator is comparing the NetBackup Accelerator and NetBackup FlashBackup features to determine which feature should be used for backup of a very
large file system with millions of files.

Which consideration is irrelevant when determining whether to use NetBackup Accelerator or NetBackup FlashBackup in the situation?

A. the file system change rate


B. the file system storage capacity
C. the type of file system being used
D. the file system folder depth

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:

QUESTION 61
An administrator took media server mediaA offline for maintenance and set up a new media server mediaB with access to the previously backed up data. When
restores are performed for data that was backed up by mediaA, the restores fail.

Which setting must the administrator modify to allow successful restores?

A. from the master server, run bpimage to change the name of the media server from mediaA to mediaB
B. set Enable unrestricted media sharing for all media servers in the master server host properties in the Media section
C. in the Bar console, change the Server to use for backup and restores setting to mediaB
D. verify both media servers are set up in the master server host properties in the Restore Failover section

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:

QUESTION 62
Some NetBackup jobs are affected by the failure of a disk in an AdvancedDisk pool, but the jobs are unavailable to view in the Activity Monitor.

In which two places can the administrator view NetBackup jobs be affected by the disk failure? (Select two.)

A. Media and Device Management > Device Monitor > Disk Pool
B. NetBackup Management > Reports > Disk Reports > Disk Logs
C. NetBackup Management > Reports > Disk Reports > Disk Pool Status
D. NetBackup Management > Reports > Disk Reports > Disk Storage Unit Status
E. NetBackup Management > Reports > Media Logs

Correct Answer: BE
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000119038#v18660372

QUESTION 63
Which disk type is unsupported in a Media Server Load Balancing storage unit group?

A. PureDisk
B. BasicDisk
C. AdvancedDisk
D. Cloud Storage

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:
Reference: https://vox.veritas.com/t5/NetBackup/Basic-Disk-Storage-unit-group-does-not-migrate-the-storage-units/td-p/626957

QUESTION 64
Refer to the exhibit.
Two media servers, sharing a library with 6 tape drives, exist in the NetBackup environment displayed in the exhibit. Both weekly full and daily differential
incremental backups need to run for the clients and each schedule has a different retention period. Because of network topology, some clients back up to Media
server 1 and some back up to Media server 2. The environment suffers from multiple status 96 failures during the backup window.

How can the administrator minimize the number of failures?

A. increase the Media unmount delay


B. configure media multiplexing
C. enable backups to span tape media
D. enable media sharing

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:
QUESTION 65
Refer to the exhibit.

Which diagram is supported for backups spanning BasicDisk storage?

A. A
B. B
C. C
D. D

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:
QUESTION 66
Backup images that reside in an MSDP storage pool have been manually expired using bpexpdate.

Which step must an administrator perform to manually free the associated space in the storage pool?

A. run image cleanup on the media server that hosts the MSDP storage server
B. run an inventory on the MSDP storage pool
C. run content router queue processing on media server that hosts the MSDP storage server
D. run content router queue processing on the master server

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:

QUESTION 67
Weekly full backups run for clientA on master1 using a storage unit that belongs to media1. The administrator is required to retain clientA’s full backups
for a period of four months. When the administrator modifies the full schedule, an option for 4 months is missing from the Retention drop-down list.

How can the administrator add a four month retention?

A. modify an existing retention level in the master server host properties, under Retention Periods
B. ignore the selection list and type in the desired retention period directly
C. add a new retention period in the media server host properties, under Retention Periods
D. increase the Image cleanup interval in the master server host properties, under Clean-up

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:

QUESTION 68
How should an administrator troubleshoot why a NetBackup Appliance is unresponsive through the assigned IP address?
A. manually power cycle the appliance
B. ssh to the appliance on eth0
C. connect to the appliance with OpsCenter
D. access the appliance console via the IPMI web interface

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:

QUESTION 69
An administrator has a MS-Windows type policy that has failed for a Microsoft Windows NetBackup client. The policy uses the ALL_LOCAL_DRIVES backup
selection. See the extract from the end of the job details below:
Which two logs will provide the most relevant information for troubleshooting and resolving the error? (Select two.)

A. Operating system logs on the client


B. NetBackup bpfis logs on the media server
C. NetBackup bptm logs on the media server
D. Operating system logs on the media server
E. NetBackup bpfis logs on the client

Correct Answer: AE
Section: (none)
Explanation

Explanation/Reference:
QUESTION 70
An administrator is adding a new media server appliance to an existing NetBackup appliance master server.

What is the correct sequence to configure the new appliance in the NetBackup domain?

A. configure the new media server, the configuration process automatically adds the new server to the master server
B. configure the new media server, then manually add the new media server to the master server’s bp.conf
C. configure the new media server, then add the new media server to the master server in the Web console under Manage > Additional Servers
D. add the new media server to the master server in the Web console under Manage > Additional Servers, then configure the new media server

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:
Reference https://www.veritas.com/support/en_US/article.000115103

QUESTION 71
A NetBackup policy is configured to back up the following paths for a client:

Multi-streaming is enabled for the backups, and multiplexing is set to 4. Backup streams are running slowly.

Which step should the administrator consider to improve backup performance?

A. increase the multiplexing level


B. back up only one stream from each physical device on the client
C. disable multi-streaming
D. increase the number of data buffers

Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:

QUESTION 72
How can an administrator copy an existing backup image of client1.example.com from an AdvancedDisk storage unit to a Media Server Deduplication Pool
(MSDP)?

A. run bpimport with the source and the destination storage unit
B. create a Storage Lifecycle Policy that contains a duplication to the MSDP pool
C. run bpduplicate with the backup ID and the destination storage unit
D. run nbreplicate with the backup ID and the destination storage unit

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:
Reference: https://vox.veritas.com/t5/NetBackup/Moving-Advance-Disk-Backup-Destination-to-Deduplication-Disk/td-p/724525

QUESTION 73
To reduce network use by limiting the number of parallel backup streams, which cloud setting should be modified under the Scalable Storage host property?

A. Metering > Metering interval


B. Network Connections > Maximum concurrent jobs
C. Throttling > Total available bandwidth
D. Throttling > Sampling interval

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000121447

QUESTION 74
When powering an appliance on, it fails to complete the Power On Self Test (POST).
Which two monitoring tools should the administrator use to gather information regarding the problem? (Select two.)

A. CLISH
B. LED Indicators
C. Data Collect bundle
D. Appliance logs
E. Alarms

Correct Answer: BE
Section: (none)
Explanation

Explanation/Reference:
Reference: https://knnubt06oc.kuenn.co:9443/products/veritas/NetBackup_52xx_and_5330_Appliance/
NetBackup_52xx_and_5330_Appliance_Troubleshooting_Guide-2.7.3.pdf (page 76)

QUESTION 75
A NetBackup appliance administrator observes poor performance on backups to an MSDP pool. The job details indicate bpbkar is waiting for empty buffers.

Where should the administrator tune the appliance?

A. Main_Menu > Settings > NetBackup DataBuffers > Size > Defaults
B. the bp.conf file’s NUMBER_DATA_BUFFERS setting
C. the bp.conf file’s NUMBER_DATA_BUFFERS_DISK setting
D. Main_Menu > Settings > NetBackup DataBuffers > Size > Disk

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:
Reference https://www.veritas.com/support/en_US/article.000010401

QUESTION 76
An administrator wishes to modify the Override default job priority option for an MS-Windows type restore job before the restore job begins.

Where in the Microsoft Windows Backup, Archive, and Restore console can the administrator configure this option?
A. after clicking the Restore button, in the Restore Marked Files dialog box
B. at the bottom of the options listed in File > NetBackup Client Properties > Network
C. in the Backup, Archive, and Restore window, under the Restore Files tab
D. within File > Specify NetBackup Machines and Policy Type

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000123107

QUESTION 77
An administrator tries to suspend an active job from the NetBackup Activity Monitor, but discovers that the option is grayed out.

What is preventing the administrator from suspending the job?

A. Child jobs are still active


B. The parent job is still active.
C. Multiplexing is enabled.
D. Checkpoint restart is disabled.

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:

QUESTION 78
Which backup storage is unsupported with media server load balancing?

A. BasicDisk
B. Media Server Deduplication Pool
C. AdvancedDisk
D. Media Manager storage

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:

QUESTION 79
An administrator configures a default Standard file system backup policy, which backs up very large file systems from a set of clients. There are multiple
scheduled backup attempts configured.

How can the administrator reduce the amount of time needed to complete these backup jobs after failures?

A. configure the Take checkpoints every policy setting


B. increase the Job retry delay host property setting
C. use the Resume Job action instead of Restart Job
D. increase the Client connect timeout host property setting

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:

QUESTION 80
By using the robot front panel. an operator ejects media 000001 from robot TLD(1) and inserts it into robot TLD(2). Neither robot has a barcode reader.

Which two actions should the administrator perform in the administration console to update the EMM database accordingly and show media 000001 at the new
location? (Select two.)

A. run a robot inventory on both robots


B. move media 000001 to standalone
C. change the volume pool in media 000001 properties
D. label media 000001
E. move media 000001 from standalone to robot 2

Correct Answer: AB
Section: (none)
Explanation

Explanation/Reference:

QUESTION 81
Backups are failing with status code 96 because tapes have NOT returned to the scratch volume pool after all the images on the tapes have expired.

What may be preventing the media from returning to the scratch pool?

A. The media was created in volume pools other than the scratch pool.
B. The media is in an off-site location.
C. The media was written with multiplexed images.
D. The media is in a Suspended state.

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000028220v

QUESTION 82
How can an administrator determine the storage and database paths for a Media Server Deduplication Pool?

A. run the Configure Disk Storage Server wizard for the MSDP
B. view Storage Unit > View Properties for the MSDP storage unit
C. view Disk Pool > Disk volumes for the MSDP disk pool
D. view Storage Server > Properties for the storage server

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000119772

QUESTION 83
Refer to the exhibit.

A backup job configured with a retention level of 2 and Policy volume pool set to the server_tapes is failing due to status code 96: Unable to allocate
new media for backup. See the output of the available_media command below:

Which task in the NetBackup Administration Console should the administrator perform to resolve the status code 96 error?

A. Change volume C11201 to the scratch_pool volume pool


B. Change volume E02002 to the scratch_pool volume pool
C. Unfreeze volume E02004 in the server_tapes volume pool
D. Change volume E02003 to the scratch_pool volume pool

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:

You might also like