Scribd
Upload
30 views1 page

Drum Rack Supply Systems

Uploaded by

Anonymous Wj1DqbE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views1 page

Drum Rack Supply Systems

Uploaded by

Anonymous Wj1DqbE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Drum Rack

Supply Systems
55 Gallon Drum Racks for Pourable Adhesives and Sealants

 Gravity feed pourable materials


directly from original 55 gallon
drums
 Feed booster pumps to
increase pressure or feed meter
assembly
A B
 Dispense 1-part or 2-part
materials
 4-Drum or 2-Drum rack
assemblies
 Change the top drum when
A B empty. Bottom drums remain
full to continuously feed the
dispensing system
Available options:
 Desiccant air dryer cartridges
for moisture sensitive materials
 Low pressure diaphragm
booster pumps
4-Drum Rack Assembly for
2-Component Moisture Sensitive Materials  High Pressure double acting
booster pumps

Drum racks are normally used to gravity feed pourable 1-part or 2-part adhesive and sealant materials to
booster pumps which in turn supply material under pressure to metering and dispensing systems. Drum racks
hold 55 gallon drums on their side which are placed on the drum rack using a drum hoist or fork lift truck.
The bottom drums remain in place and sometimes replaced when materials are filled or can cure on their own.
The top drums are replaced with full drum when empty, always keeping the bottom drums full with material.

45677 Helm Street • P.O. Box 701460 • Plymouth, MI 48170 • USA


Phone: (734) 459-8600 • Fax: (734) 459-8686
E-mail: [email protected] • Web: www.SealantEquipment.com

You might also like