800 Series
804C-33T
Agricultural, Construction and Industrial Power Units
53 kW / 71 bhp
60 kW / 80.5 bhp
Quiet clean power
The 804C-33T is operator friendly, environmentally sensitive and operates to a
low level of gaseous emissions exceeding Tier 2/Stage II off-highway regulations
Smoke levels have been kept to a minimum
The engine’s tuned mechanical structure, two-stage injection and a turbo
softened combustion minimise bare engine noise levels
High performance, productive power
Class leading power take-off capability
Turbocharged power, high torque and 21% torque back-up
Cost efficient power
The 800 Series engine family, Clean combustion with SFC as low as 220 g/kWh
developed in response to market
Oil and filter changes are set at 500 hours as standard, fuel filter replacement at
demands, blends high technology with
1,000 hours
experience to provide best value, clean
and reliable engines. All service points conveniently placed on left hand side for easy accessibility
The 800 Series engines meet all the Reliable and durable power
requirements of EC Stage II and USA
Product design and process enhance both engine reliability and durability
EPA Tier 2 off-highway emissions
legislation. With low running costs, Manufactured to standards which are customer approved and recognised
high power take-off and excellent internationally (ISO 9000)
performance, the 800 Series has Provide daily reliability and over 6,000 productive hours operation before the need
class-leading reliability and durability. for overhaul
The 804C-33T is a tough
turbocharged 3.3 litre, 4 cylinder
Product Support
indirect injection diesel and is ideally Total worldwide service is provided through 4000 service points around the
suited to power the new generation of world
more compact applications across a
wide variety of sectors.
Building on success
Performance Data Gross (ISO/TR 14396) Speed (rev/min)
Power Output (kW) 53.0 60.0 2600
Power Output (bhp) 71.0 80.5 2600
Peak Torque (Nm) 235.0 253.0 1600
Peak Torque (lbf ft) 173.0 187.0 1600
Power output for a run-in engine after 60 hours.
Photographs are for illustrative purposes only and may not reflect final specification.
All information in this document is substantially correct at time of printing and may be altered subsequently Publication No. 1640/08/05 Produced in England ©2005 Perkins Engines Company Limited
800 Series
804C-33T
Engine Specification
781 mm 649 mm
Cast iron engine block and cylinder head
Flywheel and flywheel housing
Glow plugs for cold starting down to -20%
Cast iron one-piece exhaust manifold
Belt-driven coolant pump
12 volt alternator
769 mm
Provision for PTO
Choice of cooling fans
12 volt starter motor
Two oil fill positions: front and top cover
Lub oil pressure switch 12V
Inlet manifold
Turbocharger and crossover pipe 260
256 Nm
Standard closed circuit breather 250
Torque Nm
Balancer or non-balancer 240
230
220
General Data
Number of cylinders 4 in-line vertical 60 kW
60
Bore and stroke 94 mm x 120 mm 55
Displacement 3.3 litres 50
Aspiration Turbocharged
Power Output kW
45
Cycle 4 stroke 40
Combustion system Direct injection 35
Compression ratio 19:1 30
Rotation Clockwise, viewed from front
25
Cooling system Liquid
20
Total lubrication system capacity 10 litres 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800
Total coolant capacity 5 litres Engine Speed rev/min
Length 781 mm
Width 649 mm
Height 769 mm
Dry weight 269 kg
Final weight and dimensions will depend on completed specification.
Perkins Engines Company Limited
Peterborough PE1 5NA Distributed by
United Kingdom
Telephone +44 (0)1733 583000
Fax +44 (0)1733 582240
www.perkins.com
All information in this document is substantially correct at time of printing and may be altered subsequently
Publication No.1640/08/05 Produced in England ©2005 Perkins Engines Company Limited
