FiTeL S123C Specs

Provided by www.AAATesters.com

FUSION SPLICERS A Furukawa Company

Hand-Held Clad
S123 Alignment Fusion
Fusion Splicers
Splicer

With its low profile and new super rugged body, the
FITEL® S123 Series Fusion Splicer offers speedy
operation for FTTX, LAN, backbone or long-haul instal-
lations. The lightweight, durable metal body frame
and rubber protection corners provide robust protection,
enabling use in challenging locations without compromising
splicer performance. The S123 Splicer is water resistant to IPX2
and dust resistant to IP5X.
5 Axis
A large battery capacity makes it possible to perform up to 70 RoHS IP52 Shock
cycles of splicing and heating for the S123C/M4 models with a
single battery, and 160 cycles for the S123M8/M12 models with
a dual battery configuration.
Combining portability, power flexibility and field ruggedness, the
S123 Splicer delivers fast and consistent splicing with outstand-
ing mobility and extreme ease-of-use. It also offers a splice-on-
connector (SOC) solution.
PRODUCT LINE-UP
Model Application
S123C-A Splicing for single fiber (with soft case)
S123C-B Splicing for single fiber (with hard case)
S123M4-A Splicing for single to 4 ribbon fiber (with soft case)
S123M4-B Splicing for single to 4 ribbon fiber (with hard case)
S123M8 Splicing for single to 8 ribbon fiber
S123M12 Splicing single to 12 ribbon fiber

S123M8
S123M4

S123M12
S123C
Key Features
◙ Compatible with Spice-on
• Rugged and compact hand held design for demanding envi- -Connectors (SOC)
ronmental conditions
• Fast splice (13 sec) at low loss and fast heating (25 sec) for
single fiber 1
• Simple operation with fixed V-groove
• Splicer is compatible with Seikoh Giken 2 and Diamond 3
SOCs
• 70 cycles for S123C/M4 models with a single battery, and 160
cycles for S123M8/M12 models with two batteries 4
• Available for all METRO/LAN/FTTX fibers including ultra
bend-insensitive fibers (e.g. EZ-Bend® Fiber)
• Easy maintenance – Toolless electrode replacement/mirror free
alignment system
• Easy software upgrade via the Internet
• Easily exchanged fiber holder systems (tight holder/fiber
holder/SOC holder)
• PC interface software to allow user management of splicing
programs and results
• Auto-start shrink sleeve oven feature
• Improved GUI to further enhance ease-of-use
• Large memory for storing data (2,000 splice data) and image (100 ◙ FITEL Splicer SOC Partners
images)
• RoHS compliant
CONNECTORS
Under Tough Environments
The S123 passed manufacturer testing based on criteria below 5 :
• Drop resistant – 76 cm drops from 5 different angles
• Water resistant – IPX2 rating drip proof 6
• Dust resistant – IP5X rating dust proof 7

Drop Resistant Water Resistant Dust Resistant

1
By using semi-auto mode for splicing and pre-heating mode for heating
2
Seikoh Giken is a registered trademark of SEIKOH GIKEN CO., LTD
3
Diamond is a registered trademark of Diamond SA
4
By using semi-auto mode for splicing and regular mode for heating
5
Above tests were performed at the manufacturer's Furukawa Electric Co. Labs, and do not guarantee that the machine will be undamaged under these conditions.
6
IPX2 rating drip proof means that the machine can be exposed to 3 mm/min drip from 4 different angles with 15° tilt for 2.5 min each and still functions.
7
IP5X rating dust proof means that the machine can be exposed to dust particles with a diameter of 0.1 to 25 μm for 8 hours and still functions.
 SPECIFICATIONS
SMF(ITU-T G.652), MMF(ITU-T G.651), DSF(ITU-T G.653), NZDSF(ITU-T G.655),
Applicable Fibers
BIF/UBIF (Bend insensitive fiber, ITU-T G.657)
Cladding Diameter 125 µm
Coating Diameter 250 to 900 µm for single fiber; 280 to 400 µm for ribbon (thickness) (S123M4, S124M8, S123M12)
Fibers Cleave Length 5 to 10 mm (S123C); 10 mm (S123M4, S124M8, S123M12)
Average Splice Loss SM: 0.05 dB, MM: 0.03 dB, DSF: 0.08 dB, NZDSF: 0.08 dB
Splice Time Single fiber: 13 seconds; Ribbon fiber: 15 seconds
Single fiber: 25 seconds (S922: 40 mm sleeve, S921: 60 mm sleeve) (Preheat mode) 7 (S123C, S124M4)
Heat Time
Ribbon fiber: 35 seconds (S924: 40 mm sleeve) (Preheat mode) 8
Splice Programs Max. 150
Heat Programs Max. 18
Automatic Heating Start Available
Applicable Sleeves 20/40/60 mm
Tight holder (Loose tube applicable) or Fiber Holder System (S213C)
Fiber Holding
Fiber holder system (S123M4, S124M8, S123M12)
Tension Test 1.96 N
Return Loss of Splice 60 dB or more
Fiber Image Magnification 58X (S123C), 48X (S123M4), 28X (S123M8), 20X (S123M12)
Splice Memory Max. 1500 splices (S123C, S123M4); Max. 1000 splices (S123M8, S123M12)
Image Capture Capacity Last 100 images to be automatically captured + Up to 24 images to be stored permanently
S123, S123M4: 127W × 199D × 81H mm (not including shock absorber)
159W × 231D × 104H mm (including shock absorber)
Dimension
S123M8, S123M12: 127W × 199D × 105H mm (not including shock absorber)
159W × 231D × 130H mm (including shock absorber)
S123C, S123M4: 1.4 kg (without battery), 1.6 kg (with S943B battery)
Weight
S123M8, S123M12: 1.6 kg (without battery), 2.0 kg (with two S943B batteries)
Monitor 3.5” color LCD monitor
Data Output USB ver.2.0 mini
Displaying Language 20 languages (e.g. English, Spanish, Japanese, Chinese)
Typical 70 splice/heat cycles with S943B battery (S123C, S124M4) 9
Battery Capacity
Typical 160 splice/heat cycles with two S943B batteries (S123M8, S124M12) 10
Wind Protection Max. wind velocity of 15 m/s
Operating Temperature -10 to +50 °C (without excessive humidity)
Storage Temperature -40 to +60 °C (without excessive humidity)
Power Source AC Input 100 to 240 V (50/60 Hz), DC Input 11 to 17 V without any change of hardware
8
The first heating after turning on the power can be longer that usual heating time
9
The number of the splicing and heating cycles the machine can produce using a fully charged battery at room
temperature of 20° C, semi-auto mode for splicing and regular mode for heating. Depending on the condition of
the batteries and operation environment, the number can vary.
10
The number of the splicing and heating cycles the machine can produce using a two fully charged battery at room
temperature of 20° C, semi-auto mode for splicing and regular mode for heating. Depending on the condition of
the batteries and operation environment, the number can vary.
 Spare Electrodes  Electrode Sharpener
STANDARD PACKAGE
Quantity
Item P/N
S123C-A S123C-B S123M4-A S123M4-B S123M8 S123M12 
 S123C Main body S123-C-A-0001 1 1 — — — —
 S123M4 Main body S123-M4-A-0003 — — 1 1 — —
 S123M8 Main body S123-M8-A-0003 — — — — 1 — 
 S123M12 Main body S123-M12-A-0003 — — — — — 1
 Soft Carrying Case SCC-01 1 — 1 — — —
 Hard Carrying Case HCC-01 — — — — 1 1 
 Hard Carrying Case HCC-02 — 1 — 1 — —
 Battery Pack S943B 1 1 1 1 1 or 2 1 or 2  
 Battery Charger S958B 1 1 1 1 1 1
 Spare Electrodes S969 1 1 1 1 1 1 
 AC Adaptor for S123/M4 S976A 1 1 1 1 1 1 
 AC Adaptor for S958B S977A 1 1 1 1 1 1  
 AC Cable Cord — 2 2 2 2 2 2 
 Electrode Sharpener D5111 1 1 1 1 1 1
Cleaning Brush VGC-01 1 1 1 1 1 1
Fiber Reformer (4) S122-X-A-0004 — — 1 pair 1 pair — —
Fiber Reformer (8/12) S122-X-A-0008 — — — — 1 pair 1 pair
User Manual — 1 1 1 1 1 1 Cleaning Brush Fiber Reformer
 A Furukawa Company

OPTIONAL COMPONENTS
Item P/N Quantity
 Soft Carrying Case SCC-01 1
 Cooling Tray CTX-01 1 
 Angled Stand AGS-01 1 
 Working Belt WBT-01 1
 USB Cable USB-01 1
 Car Cigarette Cable CDC-01 1
 Tight Holder  
16 mm Cleave length S712T-016
1 pair
10 mm Cleave length S712T-010 
 Fiber Holder 
250 µm coating diameter fiber S712S-250
500 µm coating diameter fiber 11 S712S-500  
1 pair 
900 µm coating diameter fiber S712S-900
1 pair
2 Ribbon Fiber Holder S712A-002
1 pair
4 Ribbon Fiber Holder S712A-004
1 pair
8 Ribbon Fiber Holder S712A-008
1 pair
12 Ribbon Fiber Holder S712A-012
1 pair
Loose Tube Fiber (left side) S712A-LT-L
Loose Tube Fiber (right side) 12 S712A-LT-R
 SOC Holders
<For Ferrule>  Angled Stand in Action Working Belt in Action Working Belt as
Shoulder Pack
Seiko Giken FC/SC connector (9 mm) S712C-SGS9-L 1
Seiko Giken FC/SC connector (5 mm) S712C-SGS5-L 1
Seiko Giken LC connector (9 mm) S712C-SGL9-L 1
Seiko Giken LC connector (5 mm) S712C-SGL5-L 1 11
Used for 400-500 μm coating diameter fiber.
Diamond E-2000™/F-3000™ LC/SC S712C-DM25-L 1 12
Also works as Diamond cordage holder.
connector 13 13
Also works as loose tube fiber holder (R). E-2000 and E-3000 are
<For Cordage> 1
trademarks of Diamond SA
Seiko Giken Cordage (5 mm) S712C-SGC5-R 1
Seiko Giken Cordage (9 mm) S712C-SGC9-R 1
Diamond Cordage (5 mm cleave, 1.8- S712C-DMC5-R
3 mm cordage)
<Tool>
Diamond Mount WTX-01 1
<Smart Fuse>
Software Interface for Machine SF-01 1

Contact Us:
Fusion Splicer Customer Service, For additional information please contact your sales This document is for informational purposes only and is
Training and Service Center representative. You can also visit our website at: not intended to modify or supplement any OFS warranties
Toll Free: 866-452-9516 http://www.ofsoptics.com. or specifications relating to any of its products or services.
Phone: 678-783-1090
Fax: 678-783-1093 OFS reserves the right to make changes to the prices and Copyright © 2010 OFS FITEL, LLC.
Email: [email protected] product(s) described in this document at any time without All rights reserved, printed in USA.
notice.
OFS Corporate Headquarters OFS
2000 Northeast Expressway EZ-Bend is a registered trademark of OFS FITEL, LLC. Marketing Communications
Norcross, Georgia 30071, USA FITEL is a registered trademark of Furukawa Denki FITEL-S123-1010
Toll Free: 888-Fiber-Help Kogyo Kabushiki Kaisha DBA The Furukawa Electric
Intl. Phone: 770-798-5555 Co., Ltd Corporation.
Email: [email protected]
Our company has configured the eFriendly Logo Mark
environmental management sys-
ISO This logo mark indicates that the products
tem at each of our plants world- and services satisfy the standards of environ- Use electronic files, available at:
14001 wide, and acquired ISO 14001 mentally friendly products of the Furukawa
certification. Electric Group. www.ofsoptics.com - Use less paper