100% found this document useful (1 vote)
409 views4 pages

Automotive Rubber Standards

This document defines characteristics for category 1 solid rubbers used by PSA Peugeot Citroën. It prohibits the use of norm B63 1100 for new designs, which must now follow norms B62 0030 and B62 0300 instead. The document specifies limits for compound characteristics like hardness and tensile strength. It also outlines specific tests for properties like heat resistance, compression set, resistance to ozone and brake fluids, and staining on various materials.

Uploaded by

Diego Camargo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
409 views4 pages

Automotive Rubber Standards

This document defines characteristics for category 1 solid rubbers used by PSA Peugeot Citroën. It prohibits the use of norm B63 1100 for new designs, which must now follow norms B62 0030 and B62 0300 instead. The document specifies limits for compound characteristics like hardness and tensile strength. It also outlines specific tests for properties like heat resistance, compression set, resistance to ozone and brake fluids, and staining on various materials.

Uploaded by

Diego Camargo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

PSA PEUGEOT - CITROËN

NORMES VEHICULES
B63 1100
SOLID RUBBERS
CATEGORY 1 COMPOUNDS

Page 1/4
PROHIBITED for NEW DESIGNS and REPLACED in this case by norme B62 0030
This is a translation, the French original shall be used in all cases of litigation Date of translation : 08/08/2006

NORME PROHIBITED FOR NEW DESIGNS AND REPLACED


BY NORMES B62 0030 AND B62 0300

FOREWORD
This norme defines the characteristics with which category 1 solid rubbers must comply, with no specific
requirements for resistance to weathering, hydrocarbons and heat.
It supplement norme B63 0100.

CONTENTS
1. LIMIT CHARACTERISTICS OF THE COMPOUND (*) 2
2. HARDNESS AND TENSILE STRENGTH 3
3. SPECIFIC CHARACTERISTICS 3
4. RECORDS AND REFERENCE DOCUMENTS 4
4.1. RECORDS 4
4.2. REFERENCE DOCUMENTS 4
4.3. EQUIVALENT TO: 4
4.4. CONFORMS TO: 4
4.5. KEY WORDS 4

OR: 01/12/1980 C: 06/07/2006 General Use


PSA PEUGEOT - CITROËN
RUBBERS – CATEGORY 1 COMPOUNDS B63 1100 2/4

1.LIMIT CHARACTERISTICS OF THE COMPOUND (*)

TYPE Initial Ar % DRC % Rd After 7 days at 70 °C


OF COMPOUND 22 h at 70 °C kN/m

min. max. min.


∆ Rr ∆ Ar
% %
Rr Ar
max. max.
Test Methods
D41 1099 D45 1132 D41 5149 D47 1053 D47 1053
D41 1099 D41 1099
12 04 350 80 10 - 30 - 50
13
07 50
10
14 04 400 80 10 - 30 - 50
07 50
10
14
21
15 04 250 80 10 - 30 - 50
07 400 50
10
14
21
16 04 250 80 10 - 30 - 50
07 300 50
10
14
21 400
17 04 150 80 10 - 30 - 50
07 200 50
10
14
21 300
18 04 100 80 10 - 30 - 50
07 50
10
14
21
19 04 75 80 10 - 30 - 50
07 50
10

(*) Hardness and tensile strength, see § Hardness and tensile strength.

OR: 01/12/1980 C: 06/07/2006 General Use


PSA PEUGEOT - CITROËN
RUBBERS – CATEGORY 1 COMPOUNDS B63 1100 3/4

2.HARDNESS AND TENSILE STRENGTH


(reference norme B63 0100)

HARNESS 2 3 4 5 6 7 8 9
INDEX No
HARDNESS 20 30 40 50 60 70 80 90
DIDC (IRHD)
(+ 5 / - 4)

TENSILE STRENGTH 04 07 10 14 21
INDEX
Rr (MPa) 4 ≤ Rr < 7 7 ≤ Rr < 10 10 ≤ Rr < 14 14 ≤ Rr < 21 Rr ≥ 21

3.SPECIFIC CHARACTERISTICS

CHARACTERISTICS TEST LIMIT VALUES SYMBOL


METHODS
Resistance to heat, in air 7 d at 70 °C ± 2 °C D47 1053 Max. loss of Rr 20 % A1
Max. loss of Ar 30 %
Compression set 22 h at 70 °C ± 2 °C D45 1132 ≤ 30 % B1

70 h at 100 °C ± 2 °C
≤ 15 % B2
≤ 50 % B7
Resistance to ozone 50 pphm by volume D47 1100 ≥ 16 h C1
(delay in showing cracks)
Resistance to brake fluids 120 h at 70 °C ± 2 °C D47 1098 Max. loss of Rr 30 % E5
(according to norme B71 2430) Max. loss of Ar 30 %
70 h at 125 °C ± 2 °C Max. loss of Rr 30 % E6
Max. loss of Ar 30 %
Resistance to tearing D41 5149 ≥ 20 kN/m G2
≥ 40 kN/m G3
Colour fastness to Xenotests 150 and 150S at 90 °C D47 1431 Grading ≥ 5 Grey scale L1
Staining on paint D27 5144 Grading ≥ 2/3 Grey scale P1
Grading ≥ 4 Grey scale P2
Staining on plastic sheets D47 1035 Grading ≥ 4/5 Grey scale P3
Grading ≥ 3/4 Grey scale S1

OR: 01/12/1980 C: 06/07/2006 General Use


PSA PEUGEOT - CITROËN
RUBBERS – CATEGORY 1 COMPOUNDS B63 1100 4/4

4.RECORDS AND REFERENCE DOCUMENTS


4.1.RECORDS
4.1.1.CREATION
• OR: 01/12/1980 – CREATION OF THE NORME
4.1.2.SUBJECT OF THE MODIFICATION
• B: 12/02/1997 – INTRODUCTION TO IDEM
• C: 06/07/2006 – evolution of the restriction: norme prohibited for new designs and replaced in this case by
normes B62 0030 and B62 0300

4.2.REFERENCE DOCUMENTS
4.2.1.PSA DOCUMENTS
4.2.1.1.Normes
B63 0100, B71 2430, D27 5144, D41 1099, D41 5149, D45 1132, D47 1035, D47 1053, D47 1098, D47 1100,
D47 1431.
4.2.1.2.Others

4.2.2.EXTERNAL DOCUMENTS

4.3.EQUIVALENT TO:

4.4.CONFORMS TO:

4.5.KEY WORDS

OR: 01/12/1980 C: 06/07/2006 General Use

You might also like