Designation: D1914 — 95 (Reapproved 2010)

Standard Practice for

Conversion Units and Factors Relating to Sampling and
Analysis of Atmospheres'
This standard is issued under the fixed designation D1914; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (s) indicates an editorial change since the last revision or reapproval.

1. Scope IEEE/ASTM SI-10 Standard for Use of the International

1.1 This practice provides units and factors useful for System of Units (SI): The Modern Metric System
members of the air pollution and meteorological communities. 3. Significance and Use
1.2 This practice is used together with IEEE/ASTM SI-10,
which discusses SI units and contains selected conversion 3.1 ASTM requires the use of SI units in all its publications
factors for inter-relation of SI units and some commonly used and their use in reporting atmospheric measurement data.
non-metric units. However, there are historic data and even data currently
reported that are based on a variety of units of measurement.
2. Referenced Documents This practice tabulates factors that are necessary to convert
2.1 ASTM Standards:2 such data to SI and other units of measurement.
D1356 Terminology Relating to Sampling and Analysis of 3.2 IEEE/ASTM SI-10 does not list all the conversion
Atmospheres factors commonly used in air pollution and meteorological
Ell Specification for Woven Wire Test Sieve Cloth and Test fields. This practice supplements IEEE/ASTM SI-10.
Sieves 3.3 The values reported here were obtained from a number
of standard publications. They were adjusted to five figures and
organized in a rational order. All values reflect the latest
information from the 16th General Conference on Weights and
This practice is under the jurisdiction of ASTM Committee D22 on Air Quality Measurements held in 1979.
and is the direct responsibility of Subcommittee D22.01 on Quality Control.
Current edition approved April 1, 2010. Published June 2010. Originally
3.4 The factors in Table 1 are provided to change units of
approved in 1961. Last previous edition approved in 2004 as D1914 - 95 (2004)". measurement from one system to related units in other systems,
DOI: 10.1520/D1914-95R10. as well as to smaller or larger units in the same system.
2 For referenced ASTM standards, visit the ASTM website, www.astm.org , or

contact ASTM Customer Service at [email protected]. For Annual Book of ASTM

3.5 Values of units in the left column may be converted to
Standards volume information, refer to the standard's Document Summary page on
values of units in the right column merely by multiplying by
the ASTM website. the conversion factor provided in the center column.

Copyright. (C) ASTM International. 100 Barr Harbour Dr., P.O. box C - 700 West Conshohocken, Pennsylvania 19428 - 2959, United States

Copyright by ASTM Int'l (all rights reserved); Mon Aug 16 10:14:45 EDT 2010
 D1914 - 95 (2010)

TABLE 1 Conversion Units

Multiply By To Obtain
Temperature
Degrees Fahrenheit (F) + 459.72 1 Degrees Fahrenheit Absolute or Rankine (R)
Degrees Fahrenheit (F) - 32 Degrees Celsius (C)
Degrees Celsius (C) + 273.15 1 Kelvins (K)
Degrees Celsius (C) + 17.78 1.8 Degrees Fahrenheit (F)
Degrees Rankine (R) - 459.72 1 Degrees Fahrenheit (F)
Kelvins (K) - 273.15 1 Degrees Celsius (C)
Pressure
Dynes per square centimetre 1.4504 x 10 -5 Pounds per square inch
-410.97x Grams per square centimetre
-6 1x 0 Bars
0.1 Pascals
Pounds per square inch absolute (psia) 70.307 Grams per square centimetre absolute
51.715 Millimetres of mercury absolute
144 Pounds per square foot absolute
1 Pounds per square inch gage + 14.696
6894.8 Pascals
Pounds per square inch gage (psig) 70.307 Grams per square centimetre
51.715 Millimetres of mercury at 0°C
27.673 Inches of water at 4°C
1 Pounds per square inch absolute - 14.696
6894.8 Pascals
Inches of water (at 4°C) 0.03614 Pounds per square inch
0.07355 Inches of mercury
0.57818 Ounces per square inch
25.399 Kilograms per square metre
2490.8 Dynes per square centimetre
249.2 Pascals
Inches of mercury (at 0°C) 0.49116 Pounds per square inch
13.595 Inches of water at 4°C
345.31 Kilograms per square metre
3.3864 x 104 Dynes per square centimetre
3386.4 Pascals
Millimetres of mercury (at 0°C) 0.01934 Pounds per square inch
1.3595 Grams per square centimetre
1333.2 Dynes per square centimetre
133.32 Pascals
Centimetres of mercury (at 0°C) 1.3332 x 104 Dynes per square centimetre
135.9 Kilograms per square metre
27.845 Pounds per square foot
1333.2 Pascals
Atmosphere (normal) 760 Millimetres of mercury at 0°C
1.0133 Bars
14.696 Pounds per square inch
29.921 Inches of mercury at 0°C
1033.2 Grams per square centimetre
1.0133 x 106 Dynes per square centimetre
1.0132 x 105 Pascals
Bars 14.504 Pounds per square inch
1.0197 x 104 Kilograms per square metre
106 1.0 x Dynes per square centimetre
750.06 Millimetres of mercury (0°C)
0.98692 Atmospheres
105 Pascals
Pascals 10 Dynes per square centimetre
1.4504 x 10-4 Pounds per square inch absolute
-34.0128x Inches of water (at 4°C)
-4 2.9530x1 Inches of mercury (at 0°C)
-57.50x1 Millimetre of mercury (at 0°C)
-69.862x10 Atmosphere (normal)
-5 10 Bars
Density
Grams per cubic centimetre 1 Grams per millilitre
0.03613 Pounds per cubic inch
8.3452 Pounds per gallon (U. S.)
62.428 Pounds per cubic foot
Pounds per cubic foot 0.01602 Grams per cubic centimetre
5.7870 x 10 -4 Pounds per cubic inch

Copyright by ASTM Inn (all rights reserved); Mon Aug 16 10:14:45 EDT 2010 2
 cliglf D1914 — 95 (2010)

TABLE 1 Continued

Multiply By To Obtain
Concentration
(See also Section 4.)
Gases in Gas:
Parts per million by volume (ppm(v)) 1 Micromoles of gas per mole of gas
1 x 10-4 Percent by volume
Molecular weight/24 450 Milligrams of substance per litre of air (at 25°C and
101.3 kPa pressure)
1 x 10-6 Partial pressure of one constituent
Total pressure of mixture
Parts per billion by volume (ppb(v)) 1 x lo-3
Parts per million by volume
One percent by volume 10 000
Parts per million by volume
Milligrams per litre 1000 Milligrams per cubic metre
1 x 106 Micrograms per cubic metre
Milligrams per cubic metre 1 x 10-3 Milligrams per litre
Micrograms per cubic metre 1 x 10-6 Milligrams per litre
Liquid and Solid Particles in Gas:
Milligrams per litre 1 x 103 Milligrams per cubic metre
1 x 106 Micrograms per cubic metre
Milligrams per cubic metre 1 x 10-3 Milligrams per litre
Micrograms per cubic metre 1 x 10-6 Milligrams per litre
Ounces per thousand cubic feet 1.0012 Grams per cubic metre
Grains per cubic foot 2.2883 Grams per cubic metre
Particles per cubic centimetre 2.8317 x 104 Particles per cubic foot
1 x 106 Particles per cubic metre
Particles per cubic metre 1 x 10-6 Particles per cubic centimetre
0.02832 Particles per cubic foot
Millions of particles per cubic foot 35.314 Millions of particles per cubic metre
Gases, Liquids, and Solids in Liquids:
Gram molecular weight per litre Moles per litre
Parts per million by weight Milligrams per litre (where specific gravity of dispersion
medium is 1.00)
Length
Angstrom units 1 x 10-1° Metres
3.9370 x 10 -9 Inches
-4 1x 0 Micrometres
1 x 10-8 Centimetres
0.1 Nanometres
Nanometres 1 x 10-9 Metres
-71x 0 Centimetres
10 Angstrom units
Micrometres 3.9370 x 10-5 Inches
-6 1x 0 Metres
1 x 10-4 Centimetres
4 1x 0 Angstrom units
Millimetres 0.03937 Inches (U. S.)
1000 Micrometres
Centimetres 0.39370 Inches (U. S.)
1 x104 Micrometres
7 1x 0 Nanometres
81x 0 Angstrom units
Metres 6.2137 x 10 -4 Miles (statute)
1.0936 Yards (U. S.)
39.370 Inches (U. S.)
1 x109 Nanometres
101x 0 Angstrom units
Kilometres 0.53961 Miles (nautical)
0.62137 Miles (statute)
1093.6 Yards
3280.8 Feet
Inches (U. S.) 0.02778 Yards
2.5400 Centimetres
2.5400 x 10 3 Angstrom units
Feet (U. S.) 0.30480 Metres
30.480 Centimetres
Yards (U. S.) 5.6818 x 10-4 Miles
0.91440 Metres
91.440 Centimetres
Miles (nautical) 1.1516 Statute miles
2026.8 Yards
1.8533 Kilometres
Miles (U. S. statute) 320 Rods
0.86836 Nautical miles
1.6094 Kilometres

Copyright by ASTM Intl (all rights reserved); Mon Aug 16 10:14:45 EDT 2010 3
 D1914 - 95 (2010)

TABLE 1 Continued

Multiply By To Obtain

1609.4 Metres
Area
Square millimetres 0.00155 Square inches
1 x 10-6 Square metres
0.01 Square centimetres
1.2732 Circular millimetres
Square centimetres 1.1960 x 10-4 Square yards
0.00108 Square feet
0.15500 Square inches
1 x 10-4 Square metres
100 Square millimetres
Square kilometres 0.38610 Square miles (U. S.)
1.1960 x 106 Square yards
1.0764 x 107 Square feet
1 x 106 Square metres
247.10 Acres (U. S.)
Square inches (U. S.) 0.00694 Square feet
0.00077 Square yards
6.4516 x 10-4 Square metres
6.4516 Square centimetres
645.16 Square millimetres
Square feet (U. S.) 3.5870 x 10-8 Square miles
0.11111 Square yards
144 Square inches
0.09290 Square metres
929.03 Square centimetres
2.2957 x 10 -5 Acres
Square miles 640 Acres
3.0976 x 106 Square yards
2.7878 x 10 7 Square feet
2.5900 Square kilometres
2.5900 x 10 6 Square metres
Volume

Cubic millimetres 6.1023 x 10 -5 Cubic inches
1 x 10-9 Cubic metres
0.001 Cubic centimetres

Millilitres 0.03381 Ounces (fluid, U.S.)
0.06102 Cubic inches
0.001 Litres
1 Cubic centimetres

Litres 0.00131 Cubic yards
0.26418 Gallons (U. S.)
0.03532 Cubic feet
33.815 Ounces (fluid, U.S.)
61.025 Cubic inches
0.00100 Cubic metres
1000 Cubic centimetres

Cubic metres 1.3079 Cubic yards (U. S.)
35.314 Cubic feet (U. S.)
264.17 Gallons (U. S.)
6.1023 x 104 Cubic inches
1000 Litres
1 x 106 Cubic centimetres
1 x 109 Cubic millimetres

Gallons (U. S.) 0.00495 Cubic yards
0.13368 Cubic feet
128 Ounces (fluid)
231 Cubic inches
0.00378 Cubic metres
3.7854 Litres
3785.4 Millilitres
3785.4 Cubic centimetres

Cubic inches (U. S.) 2.1433 x 10 -5 Cubic yards
5.7870 x 10 -4 Cubic feet
0.00433 Gallons (U. S.)
0.55410 Ounces (fluid)
1.6387 x 10-5 Cubic metres
0.01639 Litres
16.387 Millilitres
16.387 Cubic centimetres
1.6387 x 104 Cubic millimetres

Cubic feet (U. S.) 0.03704 Cubic yards

Copyright by ASTM Int'l (all rights reserved); Mon Aug 16 10:14:45 EDT 2010 4
 D1914 - 95 (2010)

TABLE 1 Continued

Multiply By To Obtain

7.4810 Gallons (U.S.)

1728.0 Cubic inches
0.02832 Cubic metres
28.316 Litres
2.8316 x 104 Cubic centimetres
Cubic centimetres 1 Millilitres
1.3079 x 10-6 Cubic yards
-53.514x0 Cubic feet (U. S.)
-4 2.6417x0 Gallons (U. S.)
0.381 Ounces (fluid, U.S.)
0.06102 Cubic inches
1 x 10-6 Cubic metres
1000 Cubic millimetres
Time

Seconds (mean solar) 1.1574 x 10-5 Days

2.7778 x 10 -4 Hours
0.01667 Minutes
Minutes (mean solar) 9.9206 x 10-5 Weeks
6.9445 x 10 -4 Days
0.01667 Hours
Hours (mean solar) 0.00595 Weeks
0.04167 Days
3600 Seconds
Days (mean solar) 1440 Minutes
8.6400 x 104 Seconds
Weeks (mean solar) 4 168 Hours
1.0080 x 104 Minutes
6.0480 x 10 5 Seconds
Months (mean calendar) 4 30.42 Days
730 Hours
4.3800 x 104 Minutes
2.628 x 106 Seconds
Years (calendar)4 8760 Hours
5.256 x 105 Minutes
Velocity

Feet per second 0.01136 Miles per minute

0.68182 Miles per hour
1.0973 Kilometres per hour
18.288 Metres per minute
30.480 Centimetres per second
Feet per minute 0.00508 Metres per second
0.01136 Miles per hour
0.01667 Feet per second
0.01829 Kilometres per hour
0.30480 Metres per minute
0.50800 Centimetres per second
Centimetres per second 3.7282 x 10 -4 Miles per minute
0.02237 Miles per hour
0.03281 Feet per second
0.03600 Kilometres per hour
0.60000 Metres per minute
1.9685 Feet per minute
Miles per hour 0.01667 Miles per minute
1.4667 Feet per second
1.6093 Kilometres per hour
26.822 Metres per minute
44.704 Centimetres per second
88 Feet per minute
Metres per minute 0.03728 Miles per hour
0.05468 Feet per second
0.06 Kilometres per hour
1.6667 Centimetres per second
3.2808 Feet per minute
Kilometres per hour 0.27778 Metres per second
0.62137 Miles per hour
0.91134 Feet per second
16.667 Metres per minute
27.778 Centimetres per second
54.681 Feet per minute

Mass (or Weight)

Milligrams 2.2046 x 10-5 Pounds (avoirdupois)

Copyright by ASTM Intl (all rights reserved); Mon Aug 16 10:14:45 EDT 2010 5


D1914 - 95 (2010)

TABLE 1 Continued

Multiply By To Obtain
3.5274 x 10 -5 Ounces (avoirdupois)
0.01543 Grains
1 x 10-6 Kilograms
Micrograms 1 x 10 -5 Grams
Grams 0.00220 Pounds (avoirdupois)
0.03527 Ounces (avoirdupois)
15.432 Grains
1 x108 Micrograms
Kilograms 0.00110 Tons (short)
2.2046 Pounds (avoirdupois)
35.274 Ounces (avoirdupois)
1.5432 x 104 Grains
Grains 1.4286 x 10-4 Pounds (avoirdupois)
0.00229 Ounces (avoirdupois)
0.06480 Grams
64.799 Milligrams
Ounces (avoirdupois) 3.1250 x 10-5 Tons (short)
0.06250 Pounds (avoirdupois)
437.50 Grains
28.350 Grams
Pounds (avoirdupois) 5 x 10-4 Tons (short)
16 Ounces (avoirdupois)
7000 Grains
0.45359 Kilograms
453.59 Grams
Tons (short, U.S.) 2000 Pounds (avoirdupois)
3.200 x 104 Ounces (avoirdupois)
907.19 Kilograms
'For specific applications and exceptions, see Terminology D1356.

4. Conversion for Gases and Vapors 5. Sieve Number versus Particle Size
4.1 To convert concentrations of gases and vapors from 5.1 The following are excerpts from Specification E 11. For
parts per million by volume to milligrams per litre and vice complete information on this subject, refer to Specification
versa at any condition of temperature and pressure, the E11.
following formulas will be found useful: Sieve Opening
Sieve Number in. Pm
Concentration, ppin(v) = (1)
(C 1 X 24 450 X T X 101.3)/(mol wt X 298 X P) 80 0.0070 180
100 .0059 150
120 .0049 125
Concentration, mg/litre = ( 2) 140 .0041 106
200 .0035 90
(C2 X mol wt X 298 X P)/(24 450 X T X 101.3) 200 .0029 75
230 .0025 63
270 .0021 53
where: 325 .0017 45
C1 = concentration, mg/L, 400 .0015 38
C2 = concentration, ppm(v),
T = absolute temperature, K, and 6. Keywords
P = absolute pressure of the sampled air stream, kPa. 6.1 area; concentration; conversions; density; length; mass;
NOTE 1-It is usually necessary to convert the measured air flow to the pressure; sieves; temperature; time; units; velocity; volume;
temperature and pressure of the sampled air stream. weight

ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentioned
in this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the risk
of infringement of such rights, are entirely their own responsibility.

This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years and
if not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standards
and should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of the
responsible technical committee, which you may attend If you feel that your comments have not received a fair hearing you should
make your views known to the ASTM Committee on Standards, at the address shown below

This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,
United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the above
address or at 610-832-9585 (phone), 610-832-9555 (fax), or [email protected] (e-mail); or through the ASTM website
(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (wwwastm.org/
COPYRIGHT/).

Copyright by ASTM (all rights reserved); Mon Aug 16 10:14:45 EDT 2010 6