Pharmaceutical Dosage Forms
dr. Erny Tandanu, M.Bmd
Department of Pharmacology and Therapeutics
Faculty of Medicine
University of Prima Indonesia
Drug
An agent or substance,
intended for use in the
diagnosis, treatment, cure
or prevention of disease
in human beings or
animals
Drugs are rarely
administered in their
original or crude forms.
They are administered in
different dosage forms by
converting them into Crude Drug
suitable formulation.
Dosage Forms
Dosage forms are the carrier through which drug
molecules are delivered to sites of action within the
body
Every dosage forms is a combination of the drug and
different kinds of non-drug components called as
Excipients or additives
The additives are used to give a particular shape to
the formulation, to increase stability, palatability &
more elegance to preparations.
Need for Dosage Forms
Accurate dose
Protection e.g. coated tablets, sealed ampules
Protection from gastric juice, e.g. enteric coated tablets
Masking unpleasant taste and odor
Provide drugs within body tissues, e.g. injection
Sustained release medication
Facilitation of insertion of drugs into body cavities (rectal,
vaginal)
Provide optimum drug action through inhalation therapy
Provide drug action through topical administration at
local area of body. E.g. creams, ointment, emulsion,
lotion, etc
Use of desired vehicle for insoluble drugs
Based on Route/Method
of Administration
Forms of oral drugs
Fastest ➢ Liquids: syrups, elixirs
➢ Suspensions
➢ Powders
Slowest ➢ Pills
➢ Capsules
➢ Tablets
Drug administration
Enteral Parenteral
Oral Intravenous
Sublingual Intramuscular
Buccal Subcutaneous
Rectal Intracutaneous
Intraarterial
Intrathecal
Intraperitoneal
Topical
Implant
Inhalation
Oral Administration
Easy to take, safe, comfortable and economic
Slow onset of action
Absorption may be affected by food
Drugs can be destroyed by gastric secretion and low
pH
First pass metabolism in liver
Drugs may irritate GI mucous
Can’t be given to unconscious patient
Clinical application
For easier ingestion, tablet can be crushed and mixed
with a small amount of liquid or soft food
Drug are given before, with or after meal
For unconscious patients, drugs can be given via NGT
(naso gastric tube)
Sublingual administration
Drug is absorbed from oral mucous
Fast absorption and high bioavailability
Fast effect
No first past metabolism in liver
Drugs are not destroyed by GI secretion
Absorption do not affected by food
Distasteful
May irritate oral mucous
Clinical application
Oral mucous should be wet to facilitate drugs
dissolution and absorption
Avoid drinking water after administer the drug
Nitrate preparations are used to be administered by
this route
Rectal application
Less first pass metabolism in liver
Can be given to unconscious or
vomiting patients
Advantages when medication has an
objectionable taste or odor
Avoid irritation to upper GI tract
Drug absorption is not complete
Several drugs may irritate rectal
mucous
Clinical application
Rectal suppositories are given to provide a local effect (e.g
laxative, anti hemorrhoid) or systemic effect (e.g analgesia,
antibiotic)
When inserting suppositories, the patients position are left lateral
After inserting suppositories, press the patients buttocks together
for few seconds
Intravenous injection
Desirable plasma concentration can be achieved
rapidly and accurately
Irritative and hypertonic drugs may be given by this
route
May provide a precise and continuous drug therapy
using IV infusion
Adverse drug reaction may occur rapidly
Insoluble or oily substance may cause embolism
Aseptic procedure may cause infection
Clinical Application
Appropriate in emergency cases which required rapid
effect
Also appropriate when the medications are too
irritating to be given by other routes (e.g cancer
chemotherapy)
Establish an iv line if we are going to administer the
medication by IV route repetitively
Always use sterile technique to prevent infection
Subcutaneous injection
Drugs injected at subcutaneous layer
Slow absorption
Combination with vasoconstrictor agents may
decrease absorption rate
Avoid irritative drugs
Clinical application
Hormones (e.g implant), local anesthetic, heparin and
insulin are used to be administered by this route
In repeated injections, the site of injection need to be
varied in order to minimize tissue damage, aid
absorption and avoid discomfort.
Intramuscular injection
Medications that irritate subcutaneous tissue (e.g
penicillin) may safely be given by this route
Absorption rate is greater than subcutaneous injection
Larger volume of fluid may be given
Frequently used sites are dorsogluteal, ventrogluteal,
vastus lateralis, rectus femoralis, deltoid and triceps
muscles
Only healthy muscles should be used for injection
Intracutaneous injection
Drug is injected into the dermal layer
just beneath the epidermis
Only small amount of liquid is used
(0,1 mL)
This method is indicated frequently
for allergy skin tests, tuberculin tests
and vaccinations
Common sites for injection are inner
lower arm, upper chest and the
back beneath the scapulae
Intra arterial injection
This route is reserved for situation requiring localization
of drug in particular organs
Localized drug concentration, so reduces the toxic
concentration in systemic circulation
E.g. injecting an anti neoplastic nitrogen moustard at
a tumor site
Sterile procedures are needed as well
Intrathecal injection
Drugs injected to subarachnoid space
In order to achieve rapid effect to cerebrospinal axis
Used in treatment of CNS infections and spinal
anesthesia
Intraperitoneal injection
Rare, more often used for laboratory animal
Large surface area, rapid absorption
High infection risk (peritonitis) and peritoneal
adhesions
Used for dialysis method
Inhalation
Drawings of air/substances into lungs, any drug/solution of drugs
administered by nasal/oral respiratory route
Used to treat respiratory problem
Common medication: broncodilators and steroid
Advantages:
Range delivery
High bioavailability – avoid 1st pass metabolism
Minimal side effect
Emergency condition
Direct to the target tissue
Self conduction
Intended to local effect at respiratory tract but systemic
absorption via alveoli may occur
Disadvantages
High cost
Special equipment
Irritation → candidiasis
Complex application
Restricted dosage via inhalation
Spread infection
Topical: on the skin
Not absorbed
Have local effect
Absorbed
Transdermal: usually slowly over a day
Based on Physical Form of
Dosage Form
Classification based of physical
form of the dosage form
Dusting Pills
powder
Granule
Tablets Capsule
Solid Dosage Forms
Solid dosage forms
Solid dosage forms one of the oldest dosage forms
and most of the solid forms are available in Unit dose
Unit dose may be defined as a exact quantity of the
drug administered at once. E.g. tablets, capsule, pills,
powders etc
When drugs are to be administered orally in dry state,
then tablets, capsules are most convenient dosage
forms
Some solids are supplied in bulk (Means quantity
available in large). Bulk powder can be supplied as
Internal (Granules, Fine powders) as well as external
(Dusting Powders, etc)
Dusting Powders
Dusting powders are applied externally to skin
Are prepared by mixing of more than one ingredients
in which either starch, kaolin or talc are used in their
formulation. Generally talc or kaolin are used because
they are inert in nature
Are used for antiseptic, astringent, absorbent,
antiperspirant, etc
Granules
Granulation is the process in which primary powder
particles are made to adhere to form larger
multiparticle or large particles entities called granules
The bitter, nauseous, unpleasant powders can not be
given tablets, capsule due to bulk quantity are
required to be taken, as well as they are not given in
liquid dosage forms due to their stability such powders
are given in the granules forms
These powders are mixed with suitable excipient along
with granulating agent, prepare a coherent mass then
dried & passed through the sieve to obtained desired
size of granules.
E.g. Effervescent granules
Effervescent Granules
For internal use
They contained medicaments mixed with citric acid,
tartaric acid & sodium bicarbonate, sometime
saccharin or sucrose may be added for sweetening
taste
Before, administration desired quantity of granules are
dissolved in water, the acid & bicarbonate reacts with
each other to produce effervescence
Tablets
Prepared by moulding or by compression with or
without excipients
The tablets can be prepared by two methods namely
as a
Dry granulation
Wet granulation
Capsule
Capsules are solid unit dosage forms in which one or
more medicaments enclosed within a shell
Capsules mainly divided into two parts namely as-
Body (longest part of capsule shell)
Cap (smallest part of capsule shell)
Generally prepared by gelatin
Depending on their formulation, two types of gelatin
are used namely as
Hard gelatin
Soft gelatin
Capsule
Hard gelatin capsule
Made up of gelatin, sugar and water. The capsule shell
contains low moisture content.
Hard and cylindrical in shape
Contain powders, granules or pellets inside the capsule
Soft gelatin capsule
Made up of gelatin, water, glycerin or sorbitol.
Contain high moisture than hard gelatin capsule
Used for the filling of liquid or semisolid preparation
Soft and vary in shape like round, oval etc
Pills
These are small, rounded solid dosage forms
containing medicaments intended for oral use
The medicaments are mixed with excipients to forms a
firms plastic mass
The mass is rolled to uniform pill pipe, which cut into
numbers of uniform pills. The pills are spherical in shape
& produced by rolling them under wooden pill
rounder
Sometimes pills are coated with varnish, gold leaf to
improve finish, unpleasant taste & stability
Liquid Dosage Forms
Liquid Dosage Form
It may be defined as “a solution is a liquid-preparation
that contains one or more soluble chemical
substances dissolved in a specified solvent”
Liquid dosage forms are intended for external, internal
or parenteral use
The component of the solution which is present in a
large quantity is known as “SOLVENT” where as the
component present in small quantity is termed as
“SOLUTE”
They mainly classified into two category namely as:
Monophasic Liquid dosage forms
Biphasic liquid dosage forms
Advantage
Administration convenient, particularly for infants,
psychotic patients
Easy to color, flavor & sweeten
Liquids are easier to swallow than solids and are
therefore particularly acceptable for pediatric patient
A solution is an homogenous system and therefore the
drug will be uniformly distributed throughout the
preparation
Some drugs like aspirin, KCl can irritate gastric mucosa
if used orally as a solid dosage forms. But this effect
can be reduced by solution system
Disadvantage
Less stable in aqueous system. Incompatibility is faster
in solution than solid dosage form
Patients have no accurate measuring device
Accident breakage of container results in complete
loss
Solution often provide suitable media for the growth of
micro organisms
The taste of a drug, which is often unpleasant, is
always more pronounced when in solution than in a
solid form
Bulky than tablets or capsule, so difficult to carry
transport
Monophasic Liquid Dosage Forms
For Internal Use
Elixirs
It is clear, sweetened, aromatic,
hydroalcoholic preparation meant
for oral use
The medicated elixirs are generally
contained potent drug like as
antibiotics, antihistamine or
sedative
The composition of elixirs contained
mainly as ethyl alcohol (active
ingredients), water, glycerin or
propylene glycol, colouring agent,
flavouring agent & preservative
Linctuses
These are viscous liquid
preparations that’s are used for
the treatment of cough
They contain medicaments
which have demulcent,
sedative, expectorant action
They are taken in small doses
without diluting with water to
have prolonged effect of
medicines
Simple syrup is used as a vehicle
for most of the linctuses
Tolu syrup is preferred in certain
cases because of its aromatic
odour & flavor. Moreover it have
a mild expectorant action
Syrup
A concentrated or saturated solutions of sucrose in
purified water
The concentration of sucrose is 66.7% w/w & due to
that it is a viscous preparations
The syrup which contains medical substance called as
a medicated syrup & those containing aromatic or
flavored substance known as a flavored syrup.
It prevent decomposition of many vegetable
substance because its have high osmotic pressure
which prevent the growth of bacteria
They are palatable due sweet taste
Drops
These are liquid preparations meant for oral
administration
The oil soluble vitamins, such as vitamin A & D
concentrates in fish – liver oil are presented as drops
for administration
Since these preparation contain potent medicaments,
the dose must be measured accurately
The following two methods are commonly used for this
purpose
Use of a dropper which is accurately graduated in
fractions of a milliliters
Use of a pre-calibrated dropper
Monophasic Liquid Dosage Forms
For External Use
Liniments
Liquid or semi-liquid preparations
meant for external application to
the skin
Usually applied to the skin with
friction & rubbing of the skin
Alcoholic and oily liquid
preparations (monophasic) or
emulsion (biphasic)
Alcoholic liniments are used
generally for their rubbing and
counterirritant effect. Such
liniments penetrate the skin more
readily than do those with an oil
base
Should not be applied to skin that
are bruised or broken
Lotions
Usually aqueous, alcoholic or
oily liquid preparations
Are intended for external
application without friction or
rubbing to the affected area
Usually applied with the help
of some absorbent material
such as cotton wool or gauze
Generally used to provide
cooling, soothing and
protective & antiseptic
action
Gargles
Aqueous solutions used for treating throat infection
(pharynx and nasopharynx part)
Supplied in concentrated forms with direction of
dilution with warm water before use
Used into intimate contact with the mucous
membrane of throat for few seconds, before they are
thrown out of the mouth
Used to relieve soreness in mild throat infection
Also used for their antiseptic, antibiotics and/or
anesthetics
Mouth wash
Aqueous solution with pleasant or acceptable taste &
odor
Used to make clean & deodorize the buccal cavity or
used for oral hygiene and to treat infections of the
mouth
They mainly contain antibacterial agent, alcohol,
glycerin, sweetening agent, flavoring agent & coloring
agent
Types of Mouth wash
Fluoride mouthwashes
Contain sodium fluoride → strengthen the teeth as well as
adding extra protection against tooth decay
Cosmetic mouthwashes
Used more as a means of disguising bad breath (halitosis)
Antiseptic mouthwashes
Contain chlorhexidine gluconate → a chemical stops the growth
of bacteria and is suitable for people with a mouth infection
Natural mouthwashes
Alcohol-free (contain no fluoride) and work in much the
same way as conventional mouthwashes
Can also treat a mouth infection or injury
Total care mouthwashes
Contain anti-bacterial ingredients which help to reduce
the build up of plaque and prevent gum disease
Throat/ Mouth paints
Viscous liquid preparations used for mouth and throat
infections
Glycerin is commonly used as a base because being
viscous and sticky, adheres to mucous membrane for
long period and it posses a sweet taste
Uses:
Pharyngitis or tonsilitis
Oral thrust
Nasal drops
Drugs in solution may be instilled into the nose from a
dropper or from a plastic squeeze bottle
The drug may have local effect, e.g antihistamine,
decongestant
Alternatively the drug may be absorbed through the
nasal mucosa to exert a systemic effect
The use of oily nasal drops should be avoided → cause
damage to cilia of nasal mucosa & long term use may
reach the lung & cause lipoid pneumonia
Preparation is maintained similar to nasal secretions
(aqueous nasal solutions), usually isotonic and
maintain a pH of 5.5 to 6.5
Nasal Spray
Nasal Drop
Eye drops
Sterile, aqueous/oily solutions or suspension intended
for instillation in eye sac
Eye drops may contain buffers, stabilizing agents,
dispersing agents, solubilizing agents, anti-oxidants &
agents required for tonicity/ viscosity adjustment
Eye lotions
Aqueous solutions used for washing the eyes
These are supplied in concentrated forms & are
required to diluted with warm water immediately
before use
They should be free from foreign particles to avoid
irritation to the eye
They are required to prepared fresh& should not be
stored for more than two days to avoid microbial
contaminations
Ear drops
Solutions of drugs that are instilled into ear cavity with
the help of dropper
Generally used for cleaning the ear, softening the wax
& for treating the mild infections
The solutions is generally prepared in water, glycerin,
propylene glycol & dilute alcohol
Adults
Children
Biphasic Liquid Dosage Forms
Biphasic liquid dosage form
The liquid which consist of two phases
Subcategorized into 2 different forms:
Emulsion
Suspension
In emulsion both phases are available in liquid where
as in suspension, finely divided solid particles are
suspended in liquid medium.
Emulsion
Drug in which one liquid is
spread by means of small
droplet over another liquid
of fat globules in water or
water globules in fat
Suspension
Contain fine, undissolved
particles of a drug
suspended in a liquid base
Important to always shake
before use
Advantage of suspension
Suspension can improve chemical stability of certain
drug.
E.g. Procaine penicillin
Drug in suspension exhibits higher rate of bioavailability
than other dosage forms
Compressed Coated
Solution Suspension Capsule
tablet tablet
Suspension can mask the unpleasant/ bitter taste of
drug
E.g chloramphenicol
Duration and onset of action can be controlled.
E.g. Protamine Zinc-Insulin suspension
Disadvantage of suspension
Physical stability, sedimentation and compaction can
causes problems
It is difficult to formulate
Uniform and accurate dose can not be achieved
unless suspension are packed in unit dosage form
All suspensions are required to be shaken before
measuring of dose
The storage of suspension may lead to changes in
disperse system especially, when there is fluctuations in
temperatures.
Ideal qualities of good
suspension
It should settle slowly & easily re-dispersed on shaking
It should readily & evenly pour from container
It should be chemically inert
It should not forms hard cake
It should prevent degradation of drug or to improve
stability of drug
It should mask the taste of biitter of unpleasant drug
Cream
Gels
Ointment
Suppository
Paste
Semisolid Dosage Forms
Ointment
For application to skin or mucous membrane
Mainly used for their protective or emollient properties
It may be defined as a medicament or medicaments
dissolved, suspended or emulsified in ointment base
There is no single ointment base which possesses all
the qualities of ideal ointment base, so it become
necessary to use more than one ointment base in the
preparation of ointment
Ideal ointment base
It should be inert, odorless & colorless & smooth
It should be physically & chemically stable
It should be compatible with the skin & with
incorporated medicaments
It should be of such consistency that it spread & soften
when applied to skin with stress
It should not retard healing of wound
Its should not produce irritation or sensitization of the
skin
Creams
These are viscous semisolid emulsions which are meant for
external use
Cream is divided into two types namely as
Aqueous creams
Oily creams
In case of aqueous creams the emulsions are o/w type &
it is relatively non greasy. The emulsifying waxes are
anionic, cationic & non-ionic used. Generally
polysorbate, triethanolamine soap are used as
emulsifying agent
In case of oily creams w/o type & it is relatively greasy.
The emulsifying agent such as wool fat, wool alcohols,
beeswax & calcium soap is used
The cream should be store in collapsible tube & supplied
in well closed container to prevent evaporation &
contamination
Pastes
Intended for external application to skin
Generally very thick & stiff
They do not melt at ordinary temperature & thus forms
a protective coating over the area where they are
applied
Pastes are differ from ointment as they contain a high
portion of finely powdered medicaments
Mainly used as an antiseptic, protective, soothing
dressings
Pastes should be stored & supplied in containers made
of materials which do not allow absorption or diffusion
of content
Gels/Jellies
Transparent or translucent,
non greasy, semi solid
preparations mainly used for
external application to skin
Also used for lubricating
catheters, surgical gloves &
rectal thermometer
The substance like gelatin,
starch, tragacanth, sodium
alginate & cellulose
derivatives are used for the
formulation of jellies
Three types:
Medicated jellies
Lubricating jellies
Miscellaneous
Suppositories
Contains solid medicated cone shape inserted into
rectum, vagina or urethra which melts at body
temperature.
It release drug after melting for local or systemic
action
Gaseous Dosage Forms
Sprays
Preparation of drugs in media
which may be aqueous,
alcoholic or glycerin
Applied to mucous
membrane of throat or nose
with an atomizer
The throat sprays must be
sprayed from a special type
of atomizer known as a
nebulizer, which removes the
large droplets by baffling
system. Only precaution
should be taken that the fine
droplet will used to easily
reach the lungs
Inhalant
Liquid preparations containing volatile substance &
are used to relieve decongestion & inflammation of
respiratory tract
The volatile substance in inhalations would be volatile
at room temperature so that they should be placed
on some adsorbent pad or handkerchief
In some cases inhalations will added to hot water
(65oC) then vapors will inhaled
New drug delivery system
Nanoparticles
Implants
Buccal strips
Released Erythrocytes
Thank You