Resin Spelter Buttons for Liebherr Crane Hoist Ropes
WireCo’s Resin Spelter Buttons are intended to be a replacement for Liebherr’s swaged buttons used on
hoist ropes and attached to the original socket. To choose the proper Resin Spelter Button for a Liebherr
crane’s hoist, match the rope diameter, the button diameter and the overall length dimension with the
current button on the crane. These buttons are to be attached only to approved hoist ropes from Casar or
Oliveira by WireCo WorldGroup or their authorized distributors. Please read and understand the Warnings
and Instructions for Resin Spelter Button Kit.
Shown below are the Resin Spelter Buttons currently available for Liebherr crane hoist ropes. For convenience,
the size Wirelock® kit required for attaching the button is indicated.
Type A Type B
Rope Button Button Maximum Size
Resin Spelter Button Diameter Diameter Length Tensile Grade Wirelock® Kit Broom Length
Description Type [mm] [mm] [mm] [N/mm²] Required [cc] [mm]
RSBLEB-15-30-90 A 13,14,15 30 90 2160 100 60
RSBLEB-17-36-108 A 16,17,18 36 108 2160 100 76
RSBLEB-21-44-126 A 19,20,21 44 126 2160 100 91
RSBLEB-23-52-175 B 23 52 175 2160 250 90
RSBLEB-25-52-175 B 24,25,26 52 175 2160 250 90
RSBLEB-28-58-203 B 27,28 58 203 2160 250 120
RSBLEB-32-65-220 B 32 65 220 1960* 250 132
*approved just for this wire grade
For Liebherr button dimensions not shown, please inquire. Do not substitute “nearly the same” buttons.
International: +49 6841 8091 381 ·
[email protected] Form No. 2018F
Resin Spelter Buttons for Liebherr Crane Hoist Ropes
List of Parts:
Resin Spelter Warnings and
Button End Cap Set Screw Instructions Warnings Flyer
RSBLEB-15-30-90 X X X X X
RSBLEB-17-36-108 X X X X X
RSBLEB-21-44-126 X X X X X
RSBLEB-23-52-175 X X X X X X
RSBLEB-25-52-175 X X X X X X
RSBLEB-28-58-203 X X X X X X
RSBLEB-32-65-220 X X X X X X
End Cap
Set Screw
Resin Spelter
Button
International: +49 6841 8091 381 ·
[email protected] Form No. 2018F
