Curve Data:

Stress-Strain Curve
Name: MS 279 Adapter
Model Type: Plasticity - von Sub Mix
Mises
Default Failure Max von Mises
Criterion: Stress
Yield Strength: 105000 psi
Tensile Strength: 125000 psi
Tangent Modulus: 1.6e+007 psi
Hardening Factor: 1
Elastic Modulus: 2.97e+007 psi
Poisson's Ratio: 0.394
Mass Density: 0.0368498 lb/in3
Thermal Expansion 6.83e-006 /oF
Coefficient:
Curve Data:

Stress-Strain Curve

11
 Thermal Study

Model Reference Properties Components

Name: MS-384 Adapter
Model type: Linear Elastic Body
Isotropic
Default failure Max von Mises
criterion: Stress
Thermal 5.71102e-005
conductivity: Btu/(in.sec.oF)
Specific heat: 0.114 Btu/(lb.oF)
Mass density: 0.284 lb/in3

Name: MS-279 - Split

Model type: Linear Elastic Ring
Isotropic - Adapter
Default failure Max von Mises Sub Mix
criterion: Stress
Thermal 5.69764e-005
conductivity: Btu/(in.sec.oF)
Specific heat: 0.114 Btu/(lb.oF)
Mass density: 0.284 lb/in3

Fixtures and Loads

 Fixtures

Fixture
Fixture Image Fixture Details
name
Entities : In the bottom
of Adapter
Body

Fixed
Type : Fixed
Geometry

12
 Fixture
Fixture Image Fixture Details
name
Resultant Forces
Components X Y Z Resultant
Reaction force(N) 3.88867 -95.015 -1.52601 95.1068
Reaction
0 0 0 0
Moment(N-m)

Entities : 6 face(s)
Type : Symmetry

Symmetry

Resultant Forces
Components X Y Z Resultant
Reaction force(N) -1.21314 -26.4659 -0.00317171 26.4937
Reaction
0 0 0 0
Moment(N-m)

 Loads
The loads are force and thermal.

Load
Load Image Load Details
name
Entities: In the bottom of Adapter
Sub Mix
Type: Apply normal force
Value: 2136 lbf
Force
Force Load is one degree of 360

13
Load name Load Image Load Details Function Curve
Entities: 3
compon
ent(s)
Temperatu Initial 0
re-1 temperat Fahren
ure: heit
Time on
variation:

Entities: 3
comp
onent(
s)
Temperatu Temperatu 80.6oF
re-2 re:
Time on
variation:
Time curve

Entities: 1
compon
ent(s)
Temperat 350oF
Temperatu ure:
re-3 Time on
variation:

Time curve

Contact Information
Contact Contact Image Contact Properties
Type : No
Penetration
contact pair
Entites : 4 faces
Contact Set-1 Advanced : Surface to
surface

Contact/Friction forces

14
 Contact Contact Image Contact Properties
Components X Y Z Resultant
Contact Force(N) -9.2344E-012 -5.0393E-011 -3.9982E-014 5.1232E-011

Type : No
Penetration
contact pair
Entites : 3 faces
Contact Set-2 Advanced : Surface to
surface

Contact/Friction forces
Components X Y Z Resultant
Contact Force(N) -7.0844E-012 3.3999E-013 1.3122E-013 7.0937E-012

Type: No
Penetratio
n contact
pair
Contact Set-3 Entites: 4 faces
Advanced: Surface to
surface

Contact/Friction forces
Components X Y Z Resultant
Contact Force(N) -2.8893E-013 -1.2059E-011 -2.5438E-017 1.2063E-011

Type : No
Penetration
contact pair
Entites : 3 faces
Advanced : Surface to
Contact Set-4 surface

15