Scribd
Upload
69 views1 page

Determination of Stresses & Deflections in Beams (For Simply Suppourted & Cantilever Beam)

This document analyzes stresses and deflections in cantilever beams and simply supported beams through experimental verification. It presents computational results for a cantilever beam subjected to a vertical point load at its free end, finding the maximum deflection. It also finds the maximum deflection and von Mises stress for a simply supported beam with a rectangular cross-section. In conclusion, it tabulates the deflection and stresses obtained for different cross-sections of a simply supported beam.

Uploaded by

Pradnesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views1 page

Determination of Stresses & Deflections in Beams (For Simply Suppourted & Cantilever Beam)

This document analyzes stresses and deflections in cantilever beams and simply supported beams through experimental verification. It presents computational results for a cantilever beam subjected to a vertical point load at its free end, finding the maximum deflection. It also finds the maximum deflection and von Mises stress for a simply supported beam with a rectangular cross-section. In conclusion, it tabulates the deflection and stresses obtained for different cross-sections of a simply supported beam.

Uploaded by

Pradnesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Determination of stresses & Deflections in beams ( For simply suppourted &

cantilever beam)
Experimental verification of beam
:Introduction
 In this we analyse cantilever beam
[1] & simply suppourted beam .All
For simply suppourted
the following cases represents Rectangular Cross-
beam
statically determinate beam since Section:
the reactions at the support can be following degree of
determined from the equation of freedom results are in
statics Global Coordinates:
 Beams are the bars which are Node UY 1- 0.0000 2 -
subjected to perpendicular loads. 231.25 3 -443.75 4 -
In the concept of beams we come 618.75 5 -737.50 6 -
across the major classification of 781.25 7 -737.50 8 - Hence, Max deflection
beams as statically determinate and 618.75 9 -443.75 10 -
obtained= 24.858 m, Von-
statically indeterminate beams. 231.25 11 0.0000
The maximum absolute mises stress obtained=
value is at node 6 and is 112.77 N/m.
equal to -781.25, since
we get the maximum conclusion
deflection at the mid-
The deflection and stresses obtained for all
span of the SSB.
the three cross-sections of simply
For cantilever beam supported beam are tabulated below.
Cross-Section Deflection Stress
I. Computational Results
Rectangular cross-section 781.252 &3750
Case 1: Cantilever beam
res.
of length L subjected to a
vertical point load ‘F’ at References
its free end (a)Element
1:-brick 8node 185 http://www.ansys.com/Products/Platform
1. ANSYS.11.0 documentation
2.Strength of materials by
S.S.Rattan

You might also like