IMPORTANT

File in your
maintenance
records

926/927 EDII Stretcher

946/944 PACU Stretcher
MAINTENANCE MANUAL

For Parts or Technical Assistance:

1–800–327–0770
 Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Warning / Caution / Note Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Preventative Maintenance Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Service Information
Hydraulic System Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Checking the Hydraulic Fluid Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Priming the Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9
Assembly Drawings And Parts Lists
Base Assembly (with Casters) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11
Base Assembly (with Foot Control Jacks) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13
Base Assembly (with Push Button Control Jacks) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
Base Assembly (with Hand Control Jacks) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17
Release Pedal Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Pump Pedal Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Jack Assembly, Control End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21
Jack Assembly, Non–Control End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 23
Jack Assembly, Hand Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 25
Jack Base Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 27
Caster Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Fifth Wheel Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Fifth Wheel Kit Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Combination Hood & Tray Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Litter Frame Assembly (926) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32, 33
Litter Frame Assembly (946) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35
Litter Assembly, Manual Fowler/Stationary Foot End (926) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 37
Litter Assembly, Manual Fowler/Stationary Foot End (946) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38, 39
Manual Fowler Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40, 41
Litter Assembly, Crank Fowler/Stationary Foot End (926) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43
Litter Assembly, Crank Fowler/Stationary Foot End (946) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 45
Crank Fowler Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46–48
Fowler Crankscrew Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Litter Assembly, Pneumatic Fowler/Stationary Foot End (926) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50, 51
Litter Assembly, Pneumatic Fowler/Stationary Foot End (946) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52, 53
Pneumatic Fowler Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54, 55
Litter Assembly, Crank Fowler/Crank Knee Gatch (926) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 57
Litter Assembly, Crank Fowler/Crank Knee Gatch (946) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58, 59
Knee Gatch Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Knee Gatch Crankscrew Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Litter Assembly, Pneumatic Fowler/Crank Knee Gatch (926) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 63
 Table of Contents

Assembly Drawings And Parts Lists (Continued)

Litter Assembly, Pneumatic Fowler/Crank Knee Gatch (946) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 65
Litter Assembly, Full–Length X–Ray/Pneumatic Fowler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Litter Frame Assembly, Full–Length X–Ray/Pneumatic Fowler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Litter Assembly, Full–Length X–Ray/Manual Fowler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Litter Frame Assembly, Full–Length X–Ray/Manual Fowler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Full–Length X–Ray Tray Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Folddown Siderail and Bumper Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71, 72
Folddown Siderail Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73, 74
Cribstyle Siderail and Bumper Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75, 76
Cribstyle Siderail Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Swingdown Siderail and Bumper Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78–81
Standard, Removable I.V. Pole Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Folding I.V. Holder Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Step Stool Kit Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Step Stool Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Fowler X–Ray Cassette Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Oxygen Bottle Holder Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Defibrillator Tray Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Paper Roll Dispenser Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Footboard/Chartholder Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Pushbar Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Armboard Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Armboard Swivel Tube Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Board Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Mattresses and Siderail Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94, 95
Warranty
Obtaining Parts and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Supplemental Warranty Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Return Authorization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Freight Damage Claims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
 Introduction

INTRODUCTION
This manual is designed to assist you with the maintenance of the 926 EDII Stretcher and the 946 PACU
Stretcher. Read it thoroughly before beginning any maintenance on the stretcher.

SPECIFICATIONS

926 946
Maximum Weight Capacity 300 pounds 300 pounds
Overall Bed Length \ Width 82” \ 28.5” 84” \ 33”
Minimum \ Maximum Bed Height 25.5” \ 34.75” 25.5” \ 35”
Fowler Angle 0_ to 90_ 0_ to 90_
Knee Gatch Angle 0_ to 35_ 0_ to 35_
Trendelenburg \ Reverse Trendelenburg +12_ to –12_ +12_ to –12_

WARNING / CAUTION / NOTE DEFINITION

The words WARNING, CAUTION and NOTE carry special meanings and should be carefully reviewed.

WARNING
The personal safety of the patient or user may be involved. Disregarding this information could result in injury
to the patient or user.

CAUTION
These instructions point out special procedures or precautions that must be followed to avoid damaging the
equipment.

NOTE
This provides special information to make maintenance easier or important instructions clearer.

3
 Cleaning

Hand wash all surfaces of the stretcher with warm water and mild detergent. Dry thoroughly. DO NOT
STEAM CLEAN, PRESSURE WASH, HOSE OFF OR ULTRASONICALLY CLEAN. Using these methods
of cleaning is not recommended and may void this product’s warranty.
Clean Velcro AFTER EACH USE. Saturate Velcro with disinfectant and allow disinfectant to evaporate. (Ap-
propriate disinfectant for nylon Velcro should be determined by the hospital.)
In general, when used in those concentrations recommended by the manufacturer, either phenolic type or
quaternary type disinfectants can be used. Iodophor type disinfectants are not recommended for use be-
cause staining may result. The following products have been tested and have been found not to have a harm-
ful effect on fabrics WHEN USED IN ACCORDANCE WITH MANUFACTURERS RECOMMENDED DILU-
TION.*

*MANUFACTURER’S
TRADE NAME DISINFECTANT MANUFACTURER RECOMMENDED
TYPE DILUTION
A33 Quaternary Airwick (Professional Products Division) 2 ounces/gallon
A33 (dry) Quaternary Airwick (Professional Products Division) 1/2 ounce/gallon
Beaucoup Phenolic Huntington Laboratories 1 ounce/gallon
Blue Chip Quaternary S.C. Johnson 2 ounces/gallon
Elimstaph Quaternary Walter G. Legge 1 ounce/gallon
Franklin Phenolic Purex Corporation 1 1/4 ounce/gallon
Phenomysan F2500
Franklin Sentinel Quaternary Purex Corporation 2 ounces/gallon
Galahad Phenolic Puritan Churchill Chemical Company 1 ounce/gallon
Hi–Tor Quaternary Huntington Laboratories 1/2 ounce/gallon
LPH Phenolic Vestal Laboratories 1/2 ounce/gallon
Matar Phenolic Huntington Laboratories 1/2 ounce/gallon
Omega Quaternary Airwick (Professional Products Division) 1/2 ounce/gallon
Quanto Quaternary Huntington Laboratories 1 ounce/gallon
Sanikleen Quaternary West Chemical Products 2 ounces/ gallon
Sanimaster II Quaternary Service Master 1 ounce/gallon
Vesphene Phenolic Vestal Laboratories 1 1/4 ounce/ gallon

Quaternary Germicidal Disinfectants, used as directed, and/or Chlorine Bleach products, typically 5.25% So-
dium Hypochlorite in dilutions ranging between 1 part bleach to 100 parts water, and 2 parts bleach
to 100 parts water are not considered mild detergents. These products are corrosive in nature and
may cause damage to your stretcher if used improperly. If these types of products are used to clean
Stryker patient handling equipment, measures must be taken to insure the stretchers are rinsed with clean
water and thoroughly dried following cleaning. Failure to properly rinse and dry the stretchers will leave a cor-
rosive residue on the surface of the stretcher, possibly causing premature corrosion of critical components.

NOTE
Failure to follow the above directions when using these types of cleaners may void this product’s warranty.

REMOVAL OF IODINE COMPOUNDS

This solution may be used to remove iodine stains from mattress cover and foam footrest pad surfaces.
1. Use a solution of 1–2 tablespoons Sodium Thiosulfate in a pint of warm water to clean the stained area.
Clean as soon as possible after staining occurs. If stains are not immediately removed, allow solution to
soak or stand on the surface.
2. Rinse surfaces which have been exposed to the solution in clear water before returning bed to service.

4
 Preventative Maintenance

CHECKLIST

All fasteners secure (reference all assembly prints)

Siderails move and latch properly (page 73–80)
All casters lock with brake pedal engaged
Brake cam pads not worn (Replace, if necessary)
Steer function working properly
All casters secure and working properly
Body restraints working properly
Oxygen bottle holder intact and operating properly (page 87)
Fowler operates and latches properly
Trendelenburg/Reverse Trendelenburg operating properly
No rips or cracks in mattress cover
Ground chain intact
No leaks at hydraulic connections
Hydraulic jacks holding properly (page 6)
Hydraulic drop rate set properly
Hydraulic oil level sufficient (page 6)
Lubricate where required

Serial No.______________
______________
______________
______________
______________

Completed By:_________________________________ Date:_____________

5
 Service Information

HYDRAULIC SYSTEM TROUBLESHOOTING

PROBLEM/SYMPTOM POSSIBLE CAUSE SOLUTION

Jack will not raise to full height. Reservoir low on hydraulic fluid. Add hydraulic fluid (see page 7)
One end of the stretcher rises Air in the pump piston. Prime the pump (see page 7).
much slower than the other end.
Reservoir low on hydraulic fluid. Add hydraulic fluid (see page 7)

Jack will not pump up. The lever assembly is in contact Adjust the length of the control
with the valve stem on the man- rod so there is a slight gap be-
ifold assembly. tween the lever and the valve
stem.

Air in the pump piston. Prime the pump (see page 7).

Defective jack. Replace the jack.

Jack will not hold in the raised The lever assembly is in contact Adjust the length of the control
position. with the valve stem on the man- rod so there is a slight gap be-
ifold assembly. tween the lever and the valve
stem.

Defective valve. Fully elevate the jack. Close the

needle valve by turning it clock-
wise. If the jack no longer sinks,
the needle valve is defective.
Replace the needle valve (part #
962–1–152).

Defective jack. Fully elevate the jack. Close the

needle valve by turning it clock-
wise. If the jack continues to
sink, the jack is defective. Re-
place the jack.

Internal leakage of oil past a Ensure all valves are fully closed
valve or seal. by depressing and releasing ap-
propriate pedal. Ensure there is
a slight gap between the lever
assembly and the valve stem.
Close the needle valve complete-
ly. If the jack holds, the leakage
is in the release valve and the
valve must be replaced.
The jack will not lower. The valve support is loose and Reposition the valve support and
out of position. tighten the screws securely.

Contact Stryker technical support at 1–800–327–0770 for further assistance.

6
 Service Information

CHECKING HYDRAULIC FLUID LEVEL

1. Lower the jack completely.
2. Remove the fill plug on the side of the jack.
3. The hydraulic fluid should be visible at the bottom of the fill hole. If it is not, add Mobil Aero HFA hydraulic
fluid (Stryker part number 2020–70–475) until the fluid is visible at the bottom of the fill hole. Replace the
fill plug.

CAUTION
Use of other types of oil may damage hydraulic units.

PRIMING THE PUMP

1. Remove the pump link and the spring.

CAUTION
The pump link is spring loaded. Use care when removing it or injury could result.

2. To remove air, actuate the pump by hand, making sure the pump piston bottoms. Reassemble and check
for leaks.

7
 Replacement Parts and Kits

PART NAME PART NUMBER

Accessory Bracket Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390–56–100

Arm Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390–11
Arm Board Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926–50–100
Base Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–21–13
Base Hood/Storage Tray Combination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926–130–22
Base Hood/Storage Tray w/Oxygen Bottle Holder . . . . . . . . . . . . . . . . . . . . . . . . 926–30–100
Base Hood End Panel Fastener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17–17
Bearing, Carpet Caster (Old Style) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390–1–290
Bearing, Conductive Caster (Old Style) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390–1–274
Brake Cam Wear Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390–1–14
Brake Cam Wear Strip Spacer (Thick) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390–1–183
Brake Cam Wear Strip Spacer (Thin) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390–1–184
Caster, Complete Set of 4 (New Style) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 715–259–400
Chart Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–28–100
Crank Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–33–18
Defibrillator/Equipment Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926–39
Fifth Wheel Assembly (Complete) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–46–100
Fifth Wheel Assembly (Wheel Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–46–27
Fifth Wheel Nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390–1–15
Fifth Wheel Pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–46–37
Foot Board/Chartholder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926–40–100
Heel Stirrups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390–20
Instrument/Serving Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1052–26
Head/Foot Board Assembly (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–29–100
Head/Foot Board Assembly (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–29–100
I.V. Caddy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1050–1–100
I.V. Pole, Permanent, Folding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–224–200
I.V. Pole, Permanent, Heavy–Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926–400
I.V. Pole, Standard, Removable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390–25
I.V. Pole, X–Ray Litter, Left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926–124–100
I.V. Pole, X–Ray Litter, Right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926–125–100
Jack Assembly, Foot Control, Control End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926–20–100
Jack Assembly, Foot Control, Non–Control End . . . . . . . . . . . . . . . . . . . . . . . . . . 926–21–100
Jack Assembly, Hand Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926–320–150
Jack Release Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 962–1–152
Knob, Hand Control Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–320–6
Label, Reverse Trendelenburg (Hand Control Jack) . . . . . . . . . . . . . . . . . . . . . . 946–1–69
Label, Trendelenburg (Hand Control Jack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–1–68
Litter Foot Skin Kit, 24” (2 Piece – Replace 1 Piece) . . . . . . . . . . . . . . . . . . . . . . 926–34–35

8
 Replacement Parts and Kits

PART NAME PART NUMBER

Mattress (2” x 24”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1059–224–140
Mattress (3” x 24”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1059–324–140
Mattress (4” x 24”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1059–424–140
Mattress (2” x 29”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1059–229–140
Mattress (3” x 29”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1059–329–140
Mattress (4” x 29”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1059–429–140
Oxygen Bottle Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926–29–100
Paper Roll Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926–55–100
Pedal, Base, Molded Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–1–153
Pedal Assembly, Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–2–56
Pin Eye, Control Rod (New Style) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926–320–153
Pin Eye, Control Rod (Old Style) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390–2–27
Pneumatic Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1010–31–77
Pop Rivet, Litter Velcro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–40
Push Bar Assembly (926) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926–27–100
Push Bar Assembly (946) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–27–100
Restraint Strap, Ankle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–43–100
Restraint Strap, Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390–19
Restraint Strap, Wrist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–44–100
Siderail Modified Nut (Swing Siderails) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926–26–40
Siderail Pad Set (Folddown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–96
Siderail Pad Set (Swing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–97
Siderail Shoulder Bolt (Swing Siderails) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–29
Step Stool, Folding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946–40–100
Transfer Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 701–41
Velcro (Litter Skin) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381–24–7
X–Ray Cassette Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926–23–10

9
 Base Assembly with Conductive or Carpet Casters
Assembly part numbers
946–41–10 (Conductive Casters)
946–42–10 (Carpet Casters)
(reference only)

AE
10

AF

AH
 Base Assembly with Conductive or Carpet Casters

946–41–10 946–42–10
Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 946–1–210 Base Assembly 1 A 946–1–210 Base Assembly 1
B 715–1–158 Caster Nut 4 B 715–1–158 Caster Nut 4
C 946–1–117 Brake Rod Bushing 2 C 946–1–117 Brake Rod Bushing 2
D 26–5 Roll Pin 4 D 26–5 Roll Pin 4
E 26–14 Roll Pin 1 E 26–14 Roll Pin 1
F 14–10 Nylon Washer A/R F 14–10 Nylon Washer A/R
H 650–15–5 Bumper 1 H 650–15–5 Bumper 1
J 390–1–119 Cam Pad Plate 2 J 390–1–119 Cam Pad Plate 2
K 390–1–14 Cam Wear Strip 2 K 390–1–14 Cam Wear Strip 2
L 390–1–183 Cam Wear Strip Spacer A/R L 390–1–183 Cam Wear Strip Spacer A/R
M 390–1–206 Caster Brake Ass’y 2 M 390–1–206 Caster Brake Ass’y 2
N 390–1–116 Brake Spring Bar 2 N 390–1–116 Brake Spring Bar 2
P 3–4 Hex Hd. Cap Screw 4 P 3–4 Hex Hd. Cap Screw 4
R 21–37 Set Screw 2 R 21–37 Set Screw 2
S (page 28) Caster Assembly 4 S 946–1–276 Carpet Caster Ass’y 4
T 946–1–198 Cam Brake Rod Ass’y 1 T 946–1–198 Cam Brake Rod Ass’y 1
W 946–1–116 Brake Bar Bushing 4 W 946–1–116 Brake Bar Bushing 4
Y 390–1–21 Foot End Cam 1 Y 390–1–21 Foot End Cam 1
Z 946–1–111 Brake Pedal 1 Z 946–1–111 Brake Pedal 1
AA 946–1–115 Brake Cushion 4 AA 946–1–115 Brake Cushion 4
AB 390–1–184 Cam Wear Strip Spacer 2 AB 390–1–184 Cam Wear Strip Spacer 2
AC 15–26 Hex Jam Nut 1 AC 15–26 Hex Jam Nut 1
AD 50–19 Pan Hd. Mach. Screw 1 AD 50–19 Pan Hd. Mach. Screw 1
AE 390–1–176 Ground Chain 1
AF 11–1 Flat Washer 1
AH 23–13 Sheet Metal Screw 1

11
 Assembly part number 946–21 (reference only)

DE

Base Assembly with Foot Control Jacks

12
 Base Assembly with Foot Control Jacks

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
B 29–7 Dual Lock 2 AZ 4–14 Soc. Hd. Cap Screw 8
C 926–1–48 Bellows 2 BA 390–1–67 Jack Washer 2
F 48–12 90_ Street Elbow 2 BB 11–63 Washer 8
H 390–2–103 Return Line 1 BC 763–1–15 Jack Spring 2
J 48–13 Needle Valve 2 BD 763–1–14 Spring Guide 2
K 390–2–64 Pin 1 BE 390–1–86 Rear Piv. Link Brg. Ass’y 1
L 11–1 Washer 6 BF (page 20, 21) Jack Ass’y, Control 1
M 27–4 Cotter Pin 8 BH 763–1–16 Sleeve 2
N 21–25 Set Screw 2 BJ 14–7 Washer A/R
P 390–2–65 Lever Assembly 2 BK 390–3–198 Rear Support Collar 1
R 38–32 Extension Spring 2 BL 763–1–13 Jack Spring 2
S 17–17 Single Head Clip 3 BM 962–1–59 Manifold Assembly 2
T (page 18) Left Pedal Base Ass’y 1 BN 390–2–106 Bumper 2
W (page 18) Right Pedal Base Ass’y 1 BP 3–37 Hex Hd. Cap Screw 2
Y 390–2–102 Pressure Line 1 BR 21–95 Set Screw 4
Z 390–2–101 Pressure Line 1 BS 15–12 Hex Nut 4
AA 946–21–15 End Cap, Foot Control 1 BT 38–31 Cable Tie 2
AB 16–6 Kep Nut 4 BW 2–15 Machine Screw 2
AC 3–32 Hex Hd. Cap Screw 2 BZ 390–3–196 Valve Support 1
AD 27–3 Cotter Pin 4 CA 15–3 Hex Nut 6
AE 390–2–70 Adjustment Rod 2 CB 390–2–119 Modified Eye Bolt 2
AF 48–14 90_ Swivel Coupling 2 CC 12–5 Lock Washer 4
AH 14–9 Washer 2 CD (page 22, 23) Jack Ass’y, Non–Cont. 1
AJ 16–11 Hex Nut 2 CE 390–2–104 Return Line, Control End 1
AK 28–97 Retaining Ring 2 CJ 946–1–61 Label, Rev. Trend. 1
AL 11–13 Washer 2 CK 946–1–62 Label, Trend. 2
AM 763–1–19 Pump Link Rod Ass’y 2 CL 946–1–63 Label, Bed Up 1
AN 23–25 Hex Wash. Hd. Tap. Screw 6 CN 390–3–218 Spacer Cover 2
AP 11–46 Washer 2 CP 921–25–10 Control Rod 2
AR 390–3–194 Hinge Plate 1 CS 15–22 Hex Nut 1
AS 11–53 Washer 2 CZ 390–2–113 Straight Support Bar 4
AT 946–1–165 Pump Conn. Rod Ass’y 1 DB 29–9 Dual Lock 2
AW (page 19) Pump Pedal Assembly 1 DD 946–1–167 Hole Cover 1
AY 8–12 Shoulder Bolt 2 DE (page 31) Hood with Storage Tray 1
946–21–13 Hood w/o Storage Tray 1

13
 Base Assembly with Push Button Control Jacks

Assembly part number 946–22 (reference only)

CX

14
 Base Assembly with Push Button Control Jacks

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 921–27–13 Push Button Control 2 AS 12–5 Lock Washer 4
B 921–27–20 Cable Support 2 AT 946–1–165 Pump Conn. Rod Ass’y 1
C 921–27–22 Cable Connector 2 AY 8–12 Shoulder Bolt 2
D 11–63 Washer 2 AZ 4–14 Soc. Hd. Cap Screw 8
E 2–15 Machine Screw 4 BA 390–1–67 Jack Washer 2
F 48–12 90_ Street Elbow 2 BB 11–63 Washer 8
H 390–2–103 Return Line 1 BC 763–1–15 Jack Spring 2
J 48–13 Needle Valve 2 BD 763–1–14 Spring Guide 2
K 390–2–64 Pin 1 BF 926–1–48 Bellows 2
N 21–25 Set Screw 2 BH 763–1–16 Sleeve 2
P 390–2–65 Lever Assembly 2 BJ 14–7 Washer A/R
R 27–4 Cotter Pin 2 BK 390–3–198 Rear Support Collar 1
S 21–63 Set Screw 2 BL 16–6 Kep Nut 2
T 16–3 Fiberlock Nut 2 BM 962–1–59 Manifold Assembly 2
Y 390–2–102 Pressure Line 1 BP 3–37 Hex Hd. Cap Screw 2
Z 390–2–101 Pressure Line 1 BR 21–95 Set Screw 4
AA 390–1–77 Rear Piv. Link Brg. Ass’y 1 BS 15–12 Hex Nut 4
AB (page 20, 21) Jack Ass’y, Control 1 BT 38–31 Cable Tie 2
AC 390–3–218 Spacer Cover 2 BW 17–17 Single Head Clip 3
AD 27–3 Cotter Pin 4 BZ 390–3–196 Valve Support 1
AE (page 19) Pump Pedal Ass’y 1 CA 15–3 Hex Nut 4
AF 48–14 90_ Swivel Coupling 2 CB 29–7 Dual Lock 2
AH 14–9 Washer 2 CF 946–1–63 Label, Bed Up 1
AJ 16–11 Hex Nut 2 CH 946–1–77 Label, Push Button 1
AK 28–97 Retaining Ring 2 CK 15–22 Hex Nut 2
AL 11–13 Washer 2 CL 946–1–78 Label, Push Button 1
AM 763–1–19 Pump Link Rod Ass’y 1 CM 946–21–15 End Cap, Ft. Control 1
AN 23–25 Hex Wash. Hd. Tap. Screw 6 CS 390–2–113 Straight Support Bar 4
AP (page 22, 23) Jack Ass’y, Non–Cont. 1 CW 29–9 Dual Lock 2
AR 390–2–104 Return Line, Cont. End 1 CX 946–21–13 Hood w/o Storage Tray 1
(page 31) Hood with Storage Tray 1

15
 Assembly part number 946–320 (reference only)

DW

Base Assembly with Hand Control Jacks

16
 Base Assembly with Hand Control Jacks

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 946–320–6 Knob Assembly 2 BH 763–1–16 Sleeve 2
B 946–20–16 Control Rod Assembly 2 BJ 14–7 Washer A/R
C 946–20–17 Control Tube 2 BK 390–3–198 Rear Support Collar 1
D 946–320–21 Stop 1 BP 3–37 Hex Hd. Cap Screw 2
E 21–40 Set Screw 4 BR 21–95 Set Screw 4
K 946–20–195 Control Collar Support 1 BS 15–12 Hex Nut 4
L 4–66 Soc. Hd. Cap Screw 2 BY 946–1–63 Label, Bed Up 1
M 390–1–77 Rear Piv. Link Brg. Ass’y 1 BZ 946–1–68 Label 1
N 21–25 Set Screw 2 CA 946–1–69 Label 1
P 16–6 Kep Nut 2 CC 27–3 Cotter Pin 2
R 946–1–165 Pump Conn. Rod Ass’y 1 CF 17–17 Panel Fastener 3
T 29–7 Dual Lock 2 CM 946–1–91 Label, Arrow 2
W 926–1–48 Bellows 2 CN 390–2–113 Straight Support Bar 4
AA 390–3–218 Spacer Cover 2 CR 29–9 Dual Lock 2
AC (page 24, 25) Jack Assembly 2 CS 15–22 Hex Nut 1
AH 14–9 Washer 2 CZ 946–21–16 End Cap, Hand Control 1
AJ 16–11 Hex Nut 2 DA 946–20–197 Ctr’l Adaptor Rod Ass’y 1
AK 28–97 Retaining Ring 2 DB 946–20–194 ”L” Bracket 2
AL 11–13 Washer 2 DC 390–1–64 Valve Control Adaptor 2
AM 763–1–19 Pump Link Rod Ass’y 2 DD 21–16 Set Screw 3
AN 23–25 Hex Wash. Hd. Tap. Screw 8 DE 946–20–199 Connecting Link 1
AW (page 19) Pump Pedal Assembly 1 DF 30–13 Bushing 2
AY 8–12 Shoulder Bolt 2 DH 946–320–3 Control Rod Ass’y 1
AZ 4–14 Soc. Hd. Cap Screw 8 DJ 390–2–22 Left Rod Clip 3
BA 390–1–67 Jack Washer 2 DK 946–320–2 Control Rod Assembly 1
BB 11–63 Washer 8 DL 926–320–153 Pin Eye (12–28 Thread) 2
BC 763–1–15 Jack Spring 2 DM 27–4 Cotter Pin 4
BD 763–1–14 Spring Guide 2 DN 390–38–8 Spacer 2
BE 11–25 Washer 2 DP 946–20–130 Collar Assembly 1
BF 45–115 O–Ring 2 DT 926–320–152 Adjustment Rod 2
DW 946–21–13 Hood w/o Storage Tray 1
(page 31) Hood with Storage Tray 1

17
946–1–159 Release Pedal Assembly, Right

946–1–160 Release Pedal Assembly, Left

Item Part No. Part Name Qty.

A 946–1–150 Pedal Weldment 1
B 946–1–153 Pedal 1
C 946–1–155 Bumper 1
D 2–18 Rd. Hd. Mach. Screw 1
E 16–6 Hex Nut 1
F 3–3 Hex Hd. Cap Screw 1
H 37–11 Neoprene Cap 1

18
 946–2–56 Pump Pedal Assembly

Item Part No. Part Name Qty.

A 946–2–55 Pump Link & Bar Ass’y 1
B 946–1–153 Pedal 1
C 946–1–155 Bumper 1
D 2–18 Rd. Hd. Mach. Screw 1
E 2–17 Rd. Hd. Mach. Screw 1

19
926–20–100 Jack Assembly, Control End

20
 926–20–100 Jack Assembly, Control End

15.060 Collapsed Height

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 45–904 Quad Ring 1 AC 390–1–244 Base Gasket 1
B 938–1–31 Cap Assembly 1 AD 921–27–12 Actuator Cylinder 1
C 390–1–243 Gasket 1 AE 926–20–127 Actuator 1
D 921–27–11 Reservoir 1 AF 15–13 Hex Jam Nut 1
E 390–2–137 Pump Cap 1 AH 390–1–238 Gasket Actuator 1
F 390–2–128 Packing 1 AJ (page 26) Jack Base, Ft. Control 1
H 390–2–135 Pump Piston 1 AK 390–2–139 Retaining Collar 2
J 45–110 O–Ring 2 AL 45–14 O–Ring 1
K 390–2–136 Pump Cylinder 1 AM 926–20–162 Wear Ring 1
L 390–1–237 Gasket Pump 1 AN 36–47 Label 1
M 926–20–160 Piston End 1 AP 390–2–101 Pressure Hose (not shown) 1
N 926–20–161 Cup Packing 1 AR 390–2–104 Return Line (not shown) 1
R 946–1–293 Label 1 AS 390–2–183 Seal Kit (not shown) A/R
AA 388–1–38 Plug 1

21
926–21–100 Jack Assembly, Non–Control End

22
 926–21–100 Jack Assembly, Non–Control End

15.060 Collapsed Height

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 45–904 Quad Ring 1 AC 390–1–244 Base Gasket 1
B 938–1–31 Cap Assembly 1 AD 921–27–12 Actuator Cylinder 1
C 390–1–243 Gasket 1 AE 926–20–127 Actuator 1
D 921–27–11 Reservoir 1 AF 15–13 Hex Jam Nut 1
E 390–2–137 Pump Cap 1 AH 390–1–238 Gasket Actuator 1
F 390–2–128 Packing 1 AJ (page 26) Jack Base, Ft. Control 1
H 390–2–135 Pump Piston 1 AK 390–2–139 Retaining Collar 2
J 45–110 O–Ring 2 AL 45–14 O–Ring 1
K 390–2–136 Pump Cylinder 1 AM 926–20–162 Wear Ring 1
L 390–1–237 Gasket Pump 1 AN 36–48 Label 1
M 926–20–160 Piston End 1 AP 390–2–102 Pressure Line (not shown) 1
N 926–20–161 Cup Packing 1 AR 390–2–103 Return Line (not shown) 1
R 946–1–293 Label 1 AS 390–2–183 Seal Kit (not shown) A/R
AA 388–1–38 Plug 1

23
926–320–150 Jack Assembly, Hand Control

24
 926–320–150 Jack Assembly, Hand Control

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 45–904 Quad Ring 1 AA 388–1–38 Plug 1
B 938–1–31 Cap Assembly 1 AC 390–1–244 Base Gasket 1
C 390–1–243 Gasket 1 AD 921–27–12 Actuator Cylinder 1
D 921–26–17 Reservoir 1 AE 926–20–127 Actuator 1
E 390–2–137 Pump Cap 1 AF 15–13 Hex Jam Nut 1
F 390–2–128 Packing 1 AH 390–1–238 Gasket Actuator 1
H 390–2–135 Pump Piston 1 AJ (page 26) Jack Base, Hand Ctrl. 1
J 45–110 O–Ring 2 AK 390–2–139 Retaining Collar 2
K 390–2–136 Pump Cylinder 1 AL 45–14 O–Ring 1
L 390–1–237 Gasket Pump 1 AM 926–20–162 Wear Ring 1
M 926–20–160 Piston End 1 AN 36–124 Label 1
N 926–20–161 Cup Packing 1 AP 45–8 O–Ring 1
R 946–1–293 Label 1 AR 390–1–226 Release Valve 1
T 390–1–64 Valve Control Adapter 1 AS 390–2–183 Seal Kit A/R
W 21–16 Set Screw 1

25
926–1–290 Jack Base Assembly, Hand Control Jack

Item Part No. Part Name Qty.

A 946–1–289 Jack Base, Hand Control 1
B 926–20–154 Seal 1
C 926–20–153 Check Valve 1
D 926–20–156 Seal 1
E 926–20–159 Valve Plug 1
F 926–20–157 Base Plug 1
H 926–20–155 Seal 1
J 926–20–152 Check Valve 1
K 926–20–158 Reservoir Plug 1

26
926–1–295 Jack Base Assembly, Foot Control Jack

Item Part No. Part Name Qty.

A 946–1–291 Jack Base, Foot Control 1
B 926–20–154 Seal 1
C 926–20–153 Check Valve 1
D 926–20–156 Seal 1
E 926–20–159 Valve Plug 1
F 926–20–157 Base Plug 1
H 926–20–155 Seal 1
J 926–20–152 Check Valve 1
K 926–20–158 Reservoir Plug 1

27
 Standard Caster Assembly

Item Part No. Part Name Qty.

A 3–99 Hex Hd. Cap Screw 1
B 11–310 Washer 1
C 16–60 Hex Nut 1
D 715–2–16 Horn Assembly 1
E 715–3–96 Hex Hd. Cap Screw 1
J 715–2–25 Wheel 1
715–1–158 Caster Nut (not shown) 1

p/n 715–259–400 – Kit to replace 4 standard caster assemblies with hardware

p/n 715–259–100 – Kit to replace 1 standard caster assembly with hardware

28
 946–46–100 Fifth Wheel Kit Assembly

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A (page 30) Wheel Assembly 1 V 390–1–136 Cam 1
B 921–23–14 Spacer 1 W 38–124 Spring 1
D 390–1–15 Caster Nut 1 Y 27–4 Cotter Pin 2
E 4–24 Soc. Hd. Cap Screw 2 Z 27–1 Cotter Pin 1
F 11–2 Flat Washer 5 AA 3–32 Hex Hd. Cap Screw 2
H 16–16 Fiberlock Nut 4 AD 11–3 Washer 1
J 946–46–12 Pin Support 1 AJ 15–32 Jam Nut 1
K 946–46–19 Locating Pin 1 AK 4–26 Soc. Hd. Cap Screw 1
L 946–46–24 Actuating Bar 1 AL 16–3 Fiberlock Hex Nut 1
M 946–46–37 Pedal 1 AM 946–1–75 Operation Label 1
N 946–46–15 Support Bracket 1 AN 946–1–76 Specification Label 1
P 946–46–32 Link Assembly 1 AP 11–63 Washer 1
R 946–46–18 Link Adjustment 1 AS 946–1–93 Label, Arrow 1
S 8–4 Shoulder Bolt 1

29
 946–46–27 Fifth Wheel Assembly

Item Part No. Part Name Qty.

A 946–46–26 Housing & Bearing Ass’y 1
B 938–26–53 Wheel Retainer Ass’y 1
C 938–26–59 Caster 1
D 938–26–49 Shaft 1
E 8–19 Shoulder Bolt 1
F 938–26–50 Shaft 1
H 28–28 Lock Ring 2
J 28–56 Lock Ring 2
K 938–26–51 Spring 1
L 938–26–52 Spring 1
M 16–12 Flexlock Nut 1
N 14–7 Washer 2
P 946–46–39 Fifth Wheel Shoe 1

30
926–30–100 Optional Combination Hood & Tray Ass’y

Item Part No. Part Name Qty.

A 926–130–22 Hood Assembly 1
B 926–30–15 Bottle Ring 1
C 926–29–22 Label 1
D 1–25 Flat Hd. Mach. Screw 2
E 11–63 Flat Washer 2
F 16–16 Fiberlock Nut 2
H 946–1–109 Adhesive Pad 4
J 946–1–108 I.V. Clip 4
K 16–27 Kep Nut 4
M 4–57 Soc. Hd. Cap Screw 4

31
 Litter Frame Assembly
Assembly part number 926–1–14, 926–1–15, 926–1–16, 926–1–17, 926–1–18
(reference only)

926–1–17 Manual Fowler/Stationary Foot End 926–1–18 Pneu. Fowler/Stationary Foot End
Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 946–1–37 Corner, Head, Left 2 A 946–1–37 Corner, Head, Left 2
B 948–1–38 Corner, Head, Right 2 B 948–1–38 Corner, Head, Right 2
C 37–30 Hole Plug 2 C 37–30 Hole Plug 2
H 946–1–43 Side Tube, Left 1 H 946–1–43 Side Tube, Left 1
J 946–1–42 Side Tube, Right 1 J 946–1–42 Side Tube, Right 1
K 946–1–35 Board Support 4 K 946–1–35 Board Support 4
L 926–1–26 Crosstube 1 L 926–1–26 Crosstube 1
M 4–54 Hex But. Hd. Cap Screw 2 M 4–54 Hex But. Hd. Cap Screw 2
N 926–1–28 Crosstube, Push Button 1 N 926–1–28 Crosstube, Push Button 1
P 16–36 Fiberlock Nut 16 P 16–36 Fiberlock Nut 15
R 25–50 Pop Rivet 6 R 25–50 Pop Rivet 16
S 926–1–26 Crosstube 1 S 926–1–26 Crosstube 1
W 946–1–30 Ft. End Litter Support 1 W 946–1–30 Ft. End Litter Support 1
Z 946–1–30 Ft. End Litter Support 1 Z 946–1–30 Ft. End Litter Support 1
AC 946–1–36 Supt. Tube & Roller Ass’y 2 AC 946–1–36 Supt. Tube & Roller Ass’y 2
AF 390–9–13 Top Supt. Tube Ass’y 2 AF 390–9–13 Top Supt. Tube Ass’y 2
AH 42–7 Collar Assembly 4 AH 42–7 Collar Assembly 4
AJ 938–1–155 Carrier Tube Supt. Bar 2 AJ 938–1–155 Carrier Tube Supt. Bar 2
AK 4–21 Soc. Hd. Cap Screw 3 AK 4–21 Soc. Hd. Cap Screw 3
AL 4–21 Soc. Hd. Cap Screw 1 AL 4–21 Soc. Hd. Cap Screw 1
AM 11–3 Washer 4 AM 11–3 Washer 4
AR 46–1 Sq. Hd. Set Screw 2 AR 46–1 Sq. Hd. Set Screw 2
AS 4–54 Hex But. Hd. Cap Screw 14 AS 4–54 Hex But. Hd. Cap Screw 14
BD 30–21 Rubber Cap 4 BA 946–35–33 Litter Supt. Ass’y 2
BB 946–35–30 Fowler Supt. Bracket 2
BD 30–21 Rubber Cap 4

32
 Litter Frame Assembly
926–1–14 Crank Fowler/Stationary Foot End

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 946–1–37 Corner, Head, Left 2 Z 946–1–30 Ft. End Litter Support 1
B 948–1–38 Corner, Head, Right 2 AB 946–1–169 Crank Support, Right 1
C 37–30 Hole Plug 2 AC 946–1–36 Supt. Tube & Roller Ass’y 2
H 946–1–43 Side Tube, Left 1 AD 938–1–392 Hd. End Carrier Tube 2
J 946–1–42 Side Tube, Right 1 AF 390–9–13 Top Support Tube Ass’y 2
K 946–1–35 Board Support 4 AH 42–7 Collar Assembly 4
L 926–1–26 Crosstube 1 AJ 938–1–155 Carrier Tube Supt. Bar 2
M 4–54 Hex But. Hd. Cap Screw 2 AK 4–21 Soc. Hd. Cap Screw 3
N 926–1–28 Crosstube, Push Button 1 AL 4–21 Soc. Hd. Cap Screw 1
P 16–36 Fiberlock Nut 18 AM 11–3 Washer 6
R 25–50 Pop Rivet 10 AP 3–40 Hex Hd. Cap Screw 2
S 926–1–24 Crosstube, Knotched 1 AR 46–1 Sq. Hd. Set Screw 2
W 946–1–30 Ft. End Litter Support 1 AS 4–54 Hex But. Hd. Cap Screw 14
Y 946–1–31 Hd. End Litter Support 2 BD 30–21 Rubber Cap 4

926–1–15 Crank Fowler/Crank Knee Gatch

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 946–1–37 Corner, Head, Left 2 AC 946–1–36 Supt. Tube & Roller Ass’y 2
B 948–1–38 Corner, Head, Right 2 AD 938–1–392 Hd. End Carrier Tube 2
D 946–1–173 Crank Support, Left 1 AE 946–34–15 Tube Support 1
H 946–1–43 Side Tube, Left 1 AF 390–9–13 Top Support Tube Ass’y 2
J 946–1–42 Side Tube, Right 1 AH 42–7 Collar Assembly 4
K 946–1–35 Board Support 4 AJ 938–1–155 Carrier Tube Supt. Bar 2
L 926–1–26 Crosstube 1 AK 4–21 Soc. Hd. Cap Screw 3
M 4–94 Hex But. Hd. Cap Screw 2 AL 4–51 Soc. Hd. Cap Screw 2
N 926–1–28 Crosstube, Push Button 1 AM 11–3 Washer 6
P 16–36 Fiberlock Nut 17 AN 11–3 Washer 2
R 25–50 Pop Rivet 10 AP 3–40 Hex Hd. Cap Screw 2
S 926–1–24 Crosstube, Knotched 1 AR 46–1 Sq. Hd. Set Screw 2
T 17–5 Acorn Nut 2 AS 4–54 Hex But. Hd. Cap Screw 14
W 946–1–30 Ft. End Litter Support 1 AY 946–22–11 Push Button Cover 1
Y 946–1–31 Hd. End Litter Support 2 AZ 23–11 Pan Hd. Mach. Screw 2
Z 946–1–50 Ft. End Litter Supt., Mod. 1 BD 30–21 Rubber Cap 4
AB 946–1–169 Crank Support, Right 1

926–1–16 Pneu. Fowler/Crank Knee Gatch

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 946–1–37 Corner, Head, Left 2 AC 946–1–36 Supt. Tube & Roller Ass’y 2
B 948–1–38 Corner, Head, Right 2 AE 946–34–15 Tube Support 1
D 946–1–173 Crank Support, Left 1 AF 390–9–13 Top Support Tube Ass’y 2
H 946–1–43 Side Tube, Left 1 AH 42–7 Collar Assembly 4
J 946–1–42 Side Tube, Right 1 AJ 938–1–155 Carrier Tube Supt. Bar 2
K 946–1–35 Board Support 4 AK 4–21 Soc. Hd. Cap Screw 3
L 926–1–26 Crosstube 1 AL 4–51 Soc. Hd. Cap Screw 2
M 4–94 Hex But. Hd. Cap Screw 2 AM 11–3 Washer 4
N 926–1–28 Crosstube, Push Button 1 AN 11–3 Washer 2
P 16–36 Fiberlock Nut 15 AR 46–1 Sq. Hd. Set Screw 2
R 25–50 Pop Rivet 16 AS 4–54 Hex But. Hd. Cap Screw 14
S 926–1–24 Crosstube, Knotched 1 AY 946–22–11 Push Button Cover 1
T 17–5 Acorn Nut 2 AZ 23–11 Pan Hd. Mach. Screw 2
W 946–1–30 Ft. End Litter Support 1 BA 946–35–33 Litter Supt. Ass’y 2
Z 946–1–50 Ft. End Litter Supt., Mod. 1 BB 946–35–30 Fowler Supt. Bracket 2
AA 946–34–24 Calf Section Rest, Rt. 1 BD 30–21 Rubber Cap 4

33
 Litter Frame Assembly
Assembly part number 946–1–14, 946–1–15, 946–1–16, 946–1–17, 946–1–18
(reference only)

946–1–17 Manual Fowler/Stationary Foot End 946–1–18 Pneu. Fowler/Stationary Foot End
Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 946–1–37 Corner, Head, Left 2 A 946–1–37 Corner, Head, Left 2
B 948–1–38 Corner, Head, Right 2 B 948–1–38 Corner, Head, Right 2
D 30–21 Rubber Cap 4 D 30–21 Rubber Cap 4
H 946–1–43 Side Tube, Left 1 H 946–1–43 Side Tube, Left 1
J 946–1–42 Side Tube, Right 1 J 946–1–42 Side Tube, Right 1
K 946–1–35 Board Support 4 K 946–1–35 Board Support 4
L 946–1–26 Crosstube 1 L 946–1–26 Crosstube 1
M 4–54 Hex But. Hd. Cap Screw 2 M 4–54 Hex But. Hd. Cap Screw 2
N 946–33–66 Crosstube, Push Button 1 N 946–33–66 Crosstube, Push Button 1
P 16–36 Fiberlock Nut 16 P 16–36 Fiberlock Nut 16
R 25–50 Pop Rivet 6 R 25–50 Pop Rivet 16
S 946–1–26 Crosstube 1 S 946–1–26 Crosstube 1
W 946–1–30 Ft. End Litter Support 1 W 946–1–30 Ft. End Litter Support 1
AC 946–1–36 Supt. Tube & Roller Ass’y 2 AC 946–1–36 Supt. Tube & Roller Ass’y 2
AF 390–9–13 Top Supt. Tube Ass’y 2 AF 390–9–13 Top Supt. Tube Ass’y 2
AH 42–7 Collar Assembly 4 AH 42–7 Collar Assembly 4
AJ 938–1–155 Carrier Tube Supt. Bar 2 AJ 938–1–155 Carrier Tube Supt. Bar 2
AK 4–21 Soc. Hd. Cap Screw 3 AK 4–21 Soc. Hd. Cap Screw 3
AL 4–21 Soc. Hd. Cap Screw 1 AL 4–21 Soc. Hd. Cap Screw 1
AM 11–3 Washer 4 AM 11–3 Washer 4
AR 46–1 Sq. Hd. Set Screw 2 AR 46–1 Sq. Hd. Set Screw 2
AS 4–54 Hex But. Hd. Cap Screw 14 AS 4–54 Hex But. Hd. Cap Screw 14
AZ 37–30 Hole Plug 2 AZ 37–30 Hole Plug 2
BC 946–1–30 Foot End Litter Support 1 BC 946–1–30 Ft. End Litter Supt. 1
BF 946–35–33 Litter Supt. Ass’y 2
BH 946–35–30 Fowler Supt. Bracket 2

34
 Litter Frame Assembly
946–1–14 Crank Fowler/Stationary Foot End
Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 946–1–37 Corner, Head, Left 2 AB 946–34–65 Crank Support Ass’y 1
B 948–1–38 Corner, Head, Right 2 AC 946–1–36 Supt. Tube & Roller Ass’y 2
D 30–21 Rubber Cap 4 AD 938–1–392 Hd. End Carrier Tube 2
H 946–1–43 Side Tube, Left 1 AF 390–9–13 Top Support Tube Ass’y 2
J 946–1–42 Side Tube, Right 1 AH 42–7 Collar Assembly 4
K 946–1–35 Board Support 4 AJ 938–1–155 Carrier Tube Supt. Bar 2
L 946–1–26 Crosstube 1 AK 4–21 Soc. Hd. Cap Screw 3
M 4–54 Hex But. Hd. Cap Screw 2 AL 4–21 Soc. Hd. Cap Screw 1
N 946–33–66 Crosstube, Push Button 1 AM 11–3 Washer 6
P 16–36 Fiberlock Nut 18 AP 3–40 Hex Hd. Cap Screw 2
R 25–50 Pop Rivet 10 AR 46–1 Sq. Hd. Set Screw 2
S 946–33–67 Crosstube, Knotched 1 AS 4–54 Hex But. Hd. Cap Screw 14
W 946–1–30 Ft. End Litter Support 1 AZ 37–30 Hole Plug 2
Y 946–1–31 Hd. End Litter Support 2 BC 946–1–30 Ft. End Litter Supt. 1

946–1–15 Crank Fowler/Crank Knee Gatch

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 946–1–37 Corner, Head, Left 2 AC 946–1–36 Supt. Tube & Roller Ass’y 2
B 948–1–38 Corner, Head, Right 2 AD 938–1–392 Hd. End Carrier Tube 2
C 17–5 Acorn Nut 2 AE 946–34–15 Tube Support 1
D 30–21 Rubber Cap 4 AF 390–9–13 Top Support Tube Ass’y 2
H 946–1–43 Side Tube, Left 1 AH 42–7 Collar Assembly 4
J 946–1–42 Side Tube, Right 1 AJ 938–1–155 Carrier Tube Supt. Bar 2
K 946–1–35 Board Support 4 AK 4–21 Soc. Hd. Cap Screw 3
L 946–1–26 Crosstube 1 AL 4–51 Soc. Hd. Cap Screw 2
M 4–94 Hex But. Hd. Cap Screw 2 AM 11–3 Washer 6
N 946–33–66 Crosstube, Push Button 1 AN 11–3 Washer 2
P 16–36 Fiberlock Nut 17 AP 3–40 Hex Hd. Cap Screw 2
R 25–50 Pop Rivet 10 AR 46–1 Sq. Hd. Set Screw 2
S 946–33–67 Crosstube, Knotched 1 AS 4–54 Hex But. Hd. Cap Screw 14
W 946–1–30 Ft. End Litter Support 1 BC 946–1–50 Ft. End Litter Supt., Mod. 1
Y 946–1–31 Hd. End Litter Support 2 BD 946–22–11 Push Button Cover 1
AB 946–34–65 Crank Support Ass’y 1 BE 23–11 Pan Hd. Mach. Screw 2

946–1–16 Pneu. Fowler/Crank Knee Gatch

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 946–1–37 Corner, Head, Left 2 AE 946–34–15 Tube Support 1
B 948–1–38 Corner, Head, Right 2 AF 390–9–13 Top Support Tube Ass’y 2
C 17–5 Acorn Nut 2 AH 42–7 Collar Assembly 4
D 30–21 Rubber Cap 4 AJ 938–1–155 Carrier Tube Supt. Bar 2
H 946–1–43 Side Tube, Left 1 AK 4–21 Soc. Hd. Cap Screw 3
J 946–1–42 Side Tube, Right 1 AL 4–51 Soc. Hd. Cap Screw 2
K 946–1–35 Board Support 4 AM 11–3 Washer 4
L 946–1–26 Crosstube 1 AN 11–3 Washer 2
M 4–94 Hex But. Hd. Cap Screw 2 AR 46–1 Sq. Hd. Set Screw 2
N 946–33–66 Crosstube, Push Button 1 AS 4–54 Hex But. Hd. Cap Screw 14
P 16–36 Fiberlock Nut 15 AT 946–1–173 Crank Support, Left 1
R 25–50 Pop Rivet 16 BC 946–1–50 Ft. End Litter Supt., Mod. 1
S 946–33–67 Crosstube, Knotched 1 BD 946–22–11 Push Button Cover 1
W 946–1–30 Ft. End Litter Support 1 BE 23–11 Pan Hd. Mach. Screw 2
AA 946–34–24 Calf Section Rest, Rt. 1 BF 946–35–33 Litter Supt. Ass’y 2
AC 946–1–36 Supt. Tube & Roller Ass’y 2 BH 946–35–30 Fowler Supt. Bracket 2

35
 Litter Assembly, Manual Fowler, Stationary Foot End

Assembly part number 926–32/926–132 (reference only)

36
 Litter Assembly, Manual Fowler, Stationary Foot End

926–32 (Non–X–Ray) 926–132 (X–Ray)

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A (page 32) Basic Frame Ass’y 1 A (page 32) Basic Frame Ass’y 1
B (page 40) Fowler Assembly 1 B (page 41) Fowler Assembly 1
C 946–332–27 Position Bracket, Rt. 1 C 946–332–27 Position Bracket, Rt. 1
D 946–34–41 Skin Supt. Angle, Lt. 1 D 946–34–41 Skin Supt. Angle, Lt. 1
E 946–34–42 Skin Supt. Angle, Rt. 1 E 946–34–42 Skin Supt. Angle, Rt. 1
F 946–34–40 Skin Supt. Angle, End 1 F 946–34–40 Skin Supt. Angle, End 1
H 926–34–31 Foot End Skin 1 H 926–34–31 Foot End Skin 1
J 966–34–40 Pivot Sleeve 2 J 966–34–40 Pivot Sleeve 2
K 926–332–26 Brace Assembly 1 K 926–332–26 Brace Assembly 1
L 966–34–41 Pivot Nut 2 L 966–34–41 Pivot Nut 2
M 946–332–28 Position Bracket, Lt. 1 M 946–332–28 Position Bracket, Lt. 1
N 25–79 Pop Rivet 8 N 25–79 Pop Rivet 8
P 25–55 Pop Rivet 23 P 25–55 Pop Rivet 23
R 14–19 Nylon Washer 2 R 14–19 Nylon Washer 2
S 946–1–285 Ground Cable 2 S 946–1–285 Ground Cable 2
T 393–53–20 Strap Anchor 4 T 393–53–20 Strap Anchor 4
W 25–77 Pop Rivet 10 W 25–77 Pop Rivet 13
Y 7900–1–102 Velcro Pile Tape A/R Y 7900–1–102 Velcro Pile Tape A/R
Z 16–11 Hex Nut 2 Z 926–32–70 Manual Fowler Nut 2
AA 1–49 Flat Hd. Mach. Screw 2 AA 1–56 Flat Hd. Mach. Screw 2
AB 25–40 Pop Rivet 8 AB 25–40 Pop Rivet 4
AC 11–108 Washer 2 AC 11–108 Washer 2
AD 650–1–48 Bumper 2 AD 650–1–48 Bumper 2
AE 25–50 Pop Rivet 6 AE 25–50 Pop Rivet 6
AF 926–1–46 Support Angle 2 AF 946–1–45 Support Angle, Rt. 1
AH 8–31 Shoulder Bolt 2 AH 8–31 Shoulder Bolt 2
AJ 16–36 Nylock Nut 2 AJ 16–36 Nylock Nut 2
AK 946–332–31 Hole Plug 2 AK 946–332–31 Hole Plug 2
AL 926–33–39 Midsection Skin 1 AL 926–33–21 Midsection Skin 1
AM 946–1–44 Support Angle, Lt. 1
AN 926–33–22 Support Angle 1

37
Litter Assembly, Manual Fowler/Stationary Foot End

Assembly part number 946–32/946–132

(reference only)

38
 Litter Assembly, Manual Fowler, Stationary Foot End

946–32 (Non–X–Ray) 946–132 (X–Ray)

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A (page 34) Basic Frame Ass’y 1 A (page 34) Basic Frame Ass’y 1
B (page 40) Fowler Assembly 1 B (page 41) Fowler Assembly 1
C 946–332–27 Position Bracket, Rt. 1 C 946–332–27 Position Bracket, Rt. 1
D 946–34–41 Skin Supt. Angle, Lt. 1 D 946–34–41 Skin Supt. Angle, Lt. 1
E 946–34–42 Skin Supt. Angle, Rt. 1 E 946–34–42 Skin Supt. Angle, Rt. 1
F 946–34–40 Skin Supt. Angle, End 1 F 946–34–40 Skin Supt. Angle, End 1
H 946–34–31 Foot End Skin 1 H 946–34–31 Foot End Skin 1
J 966–34–40 Pivot Sleeve 2 J 966–34–40 Pivot Sleeve 2
K 946–332–26 Brace Assembly 1 K 946–332–26 Brace Assembly 1
L 966–34–41 Pivot Nut 2 L 966–34–41 Pivot Nut 2
M 946–332–28 Position Bracket, Lt. 1 M 946–332–28 Position Bracket, Lt. 1
N 25–79 Pop Rivet 8 N 25–79 Pop Rivet 8
P 25–55 Pop Rivet 27 P 25–55 Pop Rivet 27
R 14–19 Nylon Washer 2 R 14–19 Nylon Washer 2
S 16–11 Hex Castle Nut 2 S 16–11 Hex Castle Nut 2
T 393–53–20 Strap Anchor 4 T 393–53–20 Strap Anchor 4
W 25–77 Pop Rivet 10 W 25–77 Pop Rivet 13
Y 7900–1–102 Velcro Pile Tape A/R Y 7900–1–102 Velcro Pile Tape A/R
Z 946–1–162 Oval Insert 2 Z 946–1–162 Oval Insert 2
AA 1–49 Flat Hd. Mach. Screw 2 AA 1–49 Flat Hd. Mach. Screw 2
AB 25–40 Pop Rivet 8 AB 25–40 Pop Rivet 4
AC 11–108 Washer 2 AC 11–108 Washer 2
AD 650–1–48 Bumper 2 AD 650–1–48 Bumper 2
AF 946–33–39 Midsection Skin 1 AE 946–34–43 Support Angle 1
AH 946–1–285 Ground Cable 2 AF 946–33–40 Midsection Skin 1
AJ 8–31 Shoulder Bolt 2 AH 946–1–285 Ground Cable 2
AK 25–50 Pop Rivet 6 AJ 8–31 Shoulder Bolt 2
AL 16–36 Nylock Nut 2 AK 25–50 Pop Rivet 6
AM 946–332–31 Hole Plug 2 AL 16–36 Nylock Nut 2
AN 926–1–46 Support Angle 2 AM 946–332–31 Hole Plug 2
AN 946–1–44 Support Angle, Lt. 1
AP 946–1–45 Support Angle, Rt. 1

39
 Manual Fowler Assembly

Assembly part numbers 926–32–55 & 946–32–55

(reference only)

926–32–55 946–32–55
Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 926–32–28 Fowler Plug, Right 1 A 926–32–28 Fowler Plug, Right 1
B 926–32–27 Fowler Plug, Left 1 B 926–32–27 Fowler Plug, Left 1
C 926–33–38 Fowler Skin, Alum. 1 C 946–33–38 Fowler Skin, Alum. 1
D 926–33–57 Fowler Tube 1 D 946–33–56 Fowler Tube 1
F 25–55 Pop Rivet 10 F 25–55 Pop Rivet 10
H 25–77 Pop Rivet 4 H 25–77 Pop Rivet 4
J 460–4–39 Handle 1 J 460–4–39 Handle 1
K 15–12 Jam Nut 4 K 15–12 Jam Nut 4

40
 Manual Fowler Assembly, X–Ray

Assembly part numbers 926–132–55 & 946–132–55

(reference only)

926–132–55 946–132–55
Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 926–32–28 Fowler Plug, Right 1 A 926–32–28 Fowler Plug, Right 1
B 926–32–27 Fowler Plug, Left 1 B 926–32–27 Fowler Plug, Left 1
C 926–133–21 Fowler Skin 1 C 946–133–21 Fowler Skin 1
D 926–33–58 Fowler Tube 1 D 946–33–56 Fowler Tube 1
E 926–23–72 Shim 2 E 926–23–72 Shim 2
F 25–77 Pop Rivet 9 F 25–77 Pop Rivet 9
H 25–69 Pop Rivet 2 H 25–69 Pop Rivet 2
J 946–332–32 Cassette Hanger 2 J 946–332–32 Cassette Hanger 2
K 7–20 Truss Hd. Mach. Screw 2 K 7–20 Truss Hd. Mach. Screw 2
L 460–4–39 Handle 1 L 460–4–39 Handle 1
M 15–12 Jam Nut 4 M 15–12 Jam Nut 4

41
Litter Assembly, Crank Fowler, Stationary Foot End

Assembly part number

926–33/926–133
(reference only)

42
 Litter Assembly, Crank Fowler, Stationary Foot End

926–33 (Non–X–Ray) 926–133 (X–Ray)

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A (page 32 & 33) Basic Frame Ass’y 1 A (page 32 & 33) Basic Frame Ass’y 1
B (page 46) Fowler Assembly 1 B (page 48) Fowler Assembly 1
C (page 49) Crankscrew Ass’y 1 C (page 49) Crankscrew Ass’y 1
D 946–34–41 Skin Supt. Angle, Lt. 1 D 946–34–41 Skin Supt. Angle, Lt. 1
E 946–34–42 Skin Supt. Angle, Rt. 1 E 946–34–42 Skin Supt. Angle, Rt. 1
F 946–34–40 Skin Supt. Angle, End 1 F 946–34–40 Skin Supt. Angle, End 1
H 926–34–31 Foot End Skin 1 H 926–34–31 Foot End Skin 1
J 966–34–40 Pivot Sleeve 2 J 966–34–40 Pivot Sleeve 2
K 966–34–41 Pivot Nut 2 K 966–34–41 Pivot Nut 2
L 15–13 Hex Nut 1 L 15–13 Hex Nut 1
M 25–55 Pop Rivet 24 M 25–55 Pop Rivet 24
N 16–11 Hex Castle Nut 2 N 16–11 Hex Castle Nut 2
P 14–21 Washer 2 P 14–21 Washer 2
R 938–1–166 Modified Bolt 1 R 938–1–166 Modified Bolt 1
S 8–24 Hex Soc. Shoulder Bolt 2 S 8–24 Hex Soc. Shoulder Bolt 2
T 393–53–20 Strap Anchor 4 T 393–53–20 Strap Anchor 4
W 25–77 Pop Rivet 4 W 25–77 Pop Rivet 4
Y 946–1–285 Ground Cable 2 Y 946–1–285 Ground Cable 2
Z 7900–1–102 Velcro Pile Tape A/R Z 7900–1–102 Velcro Pile Tape A/R
AA 926–1–162 Oval Insert 1 AA 926–1–162 Oval Insert 1
AB 946–1–64 Label, Fowler 1 AB 946–1–64 Label, Fowler 1
AC 25–40 Pop Rivet 8 AC 25–50 Pop Rivet 4
AD 11–108 Flat Washer 2 AD 11–108 Washer 2
AE 460–2–32 Grounding Strap 2 AE 460–2–32 Grounding Strap 2
AF 11–64 Flat Washer 2 AF 11–64 Flat Washer 2
AH 25–69 Pop Rivet 2 AH 25–69 Pop Rivet 2
AJ 8–31 Shoulder Bolt 2 AJ 8–31 Shoulder Bolt 2
AK 926–1–37 Midsection Spacer 2 AL 946–33–26 Pivot Linkage 2
AL 946–33–26 Pivot Linkage 2 AM 25–75 Pop Rivet 9
AM 25–75 Pop Rivet 6 AN 926–33–17 Spacer 2
AN 926–33–17 Spacer 2 AP 926–33–26 Bearing 2
AP 926–33–26 Bearing 2 AS 16–36 Nylock Nut 2
AR 52–6 Spacer 2 AT 926–33–21 Midsection Skin 1
AS 16–36 Nylock Nut 2 AW 926–1–39 Angle Supt., Rt. 1
AT 926–33–39 Midsection Skin 1 AY 926–1–40 Angle Supt., Lt. 1
AW 926–1–39 Angle Supt., Rt. 1 AZ 25–50 Pop Rivet 6
AY 926–1–40 Angle Supt., Lt. 1 BA 926–33–22 Angle Support 1
AZ 25–50 Pop Rivet 6

43
Litter Assembly, Crank Fowler, Stationary Foot End

Assembly part number 946–33/946–133

(reference only)

44
 Litter Assembly, Crank Fowler, Stationary Foot End

946–33 (Non–X–Ray) 946–133 (X–Ray)

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A (page 34 & 35) Basic Frame Ass’y 1 A (page 34 & 35) Basic Frame Ass’y 1
B (page 47) Fowler Assembly 1 B (page 48) Fowler Assembly 1
C (page 49) Crankscrew Ass’y 1 C (page 49) Crankscrew Ass’y 1
D 946–34–41 Skin Supt. Angle, Lt. 1 D 946–34–41 Skin Supt. Angle, Lt. 1
E 946–34–42 Skin Supt. Angle, Rt. 1 E 946–34–42 Skin Supt. Angle, Rt. 1
F 946–34–40 Skin Supt. Angle, End 1 F 946–34–40 Skin Supt. Angle, End 1
H 946–34–31 Foot End Skin 1 H 946–34–31 Foot End Skin 1
J 966–34–40 Pivot Sleeve 2 J 966–34–40 Pivot Sleeve 2
K 966–34–41 Pivot Nut 2 K 966–34–41 Pivot Nut 2
L 15–13 Hex Nut 1 L 15–13 Hex Nut 1
M 25–55 Pop Rivet 25 M 25–55 Pop Rivet 25
N 16–11 Hex Castle Nut 2 N 16–11 Hex Castle Nut 2
P 14–21 Washer 2 P 14–21 Washer 2
R 938–1–166 Modified Bolt 1 R 938–1–166 Modified Bolt 1
S 8–24 Hex Soc. Shoulder Bolt 2 S 8–24 Hex Soc. Shoulder Bolt 2
T 393–53–20 Strap Anchor 4 T 393–53–20 Strap Anchor 4
W 25–77 Pop Rivet 4 W 25–77 Pop Rivet 4
Y 946–33–33 Clip 1 Y 946–33–33 Clip 1
Z 7900–1–102 Velcro Pile Tape A/R Z 7900–1–102 Velcro Pile Tape A/R
AA 926–1–162 Oval Insert 1 AA 946–1–162 Oval Insert 1
AB 946–1–64 Label, Fowler 1 AB 946–1–64 Label, Fowler 1
AC 25–40 Pop Rivet 8 AC 25–40 Pop Rivet 4
AD 11–108 Flat Washer 2 AD 11–108 Washer 2
AE 460–2–32 Grounding Strap 2 AE 460–2–32 Grounding Strap 2
AF 11–64 Flat Washer 2 AF 11–64 Flat Washer 2
AH 25–69 Pop Rivet 2 AH 25–69 Pop Rivet 2
AJ 8–31 Shoulder Bolt 2 AJ 8–31 Shoulder Bolt 2
AK 946–33–39 Midsection Skin 1 AK 946–33–40 Midsection Skin 1
AL 52–6 Spacer 2 AM 926–33–17 Spacer 2
AM 926–33–17 Spacer 2 AN 946–33–26 Pivot Linkage 2
AN 946–33–26 Pivot Linkage 2 AP 926–33–36 Bearing 2
AP 926–33–36 Bearing 2 AR 25–38 Pop Rivet 2
AR 25–38 Pop Rivet 2 AS 16–36 Nylock Nut 2
AS 16–36 Nylock Nut 2 AT 25–75 Pop Rivet 9
AT 25–75 Pop Rivet 6 AY 926–1–39 Angle Supt., Rt. 1
AW 926–1–37 Midsection Skin Spacer 2 AZ 926–1–40 Angle Supt., Lt. 1
AY 926–1–39 Angle Supt., Rt. 1 BA 25–50 Pop Rivet 6
AZ 926–1–40 Angle Supt., Lt. 1 BB 946–1–285 Ground Cable 2
BA 25–50 Pop Rivet 6 BC 946–34–43 Midsection Support 1
BB 946–1–285 Ground Cable 2

45
 Crank Fowler Assembly

Assembly part number 926–32–55 (reference only)

Item Part No. Part Name Qty.

A 926–33–50 Fowler Pivot Ass’y, Rt. 1
B 926–33–51 Fowler Pivot Ass’y, Lt. 1
C 926–33–38 Fowler Skin, Alum. 1
D 926–33–47 Fowler Tube 1
E 926–32–22 Riser 2
F 25–55 Pop Rivet 8
H 22–11 Drive Screw 4
J 25–69 Pop Rivet 6

46
 Crank Fowler Assembly

Assembly part number 946–33–55 (reference only)

Item Part No. Part Name Qty.

A 926–33–50 Fowler Pivot Ass’y, Rt. 1
B 926–33–51 Fowler Pivot Ass’y, Lt. 1
C 946–33–38 Fowler Skin, Alum. 1
D 946–33–47 Fowler Tube 1
E 926–32–22 Riser 2
F 25–55 Pop Rivet 8
H 22–11 Drive Screw 4
J 25–69 Pop Rivet 6

47
 Crank Fowler Assembly, X–Ray

Assembly part numbers 926–133–55 & 946–133–55 (reference only)

926–133–55 946–133–55
Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 926–33–50 Fowler Pivot Ass’y, Rt. 1 A 926–33–50 Fowler Pivot Ass’y, Rt. 1
B 926–33–51 Fowler Pivot Ass’y, Lt. 1 B 926–33–51 Fowler Pivot Ass’y, Lt. 1
C 926–133–21 Fowler Skin 1 C 946–133–21 Fowler Skin 1
D 926–33–47 Fowler Tube 1 D 946–33–47 Fowler Tube 1
E 926–32–22 Riser 2 E 926–32–22 Riser 2
F 25–77 Pop Rivet 5 F 25–77 Pop Rivet 5
H 22–21 Drive Screw 4 H 22–21 Drive Screw 4
J 25–69 Pop Rivet 6 J 25–69 Pop Rivet 6
K 926–23–61 Hanger 2 K 926–23–61 Hanger 2
L 7–20 Truss Hd. Mach. Screw 2 L 7–20 Truss Hd. Mach. Screw 2
M 926–23–72 Shim 2 M 926–23–72 Shim 2

48
 926–33–30 & 946–34–53 Fowler Crankscrew Assembly

P A
D B C H

P S Y A
B C H K L
M N
K

T
W
J

E
D
F R

926–33–30 946–34–53
Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 926–33–27 Crosstube Assembly 1 A 946–33–68 Crosstube Assembly 1
B 946–33–28 Crank Assembly 1 B 946–33–28 Crank Assembly 1
C 946–33–18 Crank Disc 1 C 946–33–18 Crank Disc 1
D 938–1–177 Knob 1 D 938–1–177 Knob 1
E 16–6 Kep Nut 1 E 16–6 Kep Nut 1
F 378–24–29 Shoulder Bolt 1 F 378–24–29 Shoulder Bolt 1
H 946–33–35 Fowler Screw 1 H 946–33–35 Fowler Screw 1
J 26–14 Roll Pin 2 J 26–14 Roll Pin 2
K 81–174 Thrust Washer 2 K 81–174 Thrust Washer 2
L 938–1–175 Bearing Assembly 1 L 938–1–175 Bearing Assembly 1
M 81–176 Thrust Washer 1 M 81–176 Thrust Washer 1
N 81–175 Thrust Bearing 1 N 81–175 Thrust Bearing 1
P 946–33–31 Screw Cover Assembly 1 P 946–34–63 Screw Cover Assembly 1
R 946–33–33 Spring Clip 1 R 946–33–33 Spring Clip 1
S 26–10 Roll Pin 1 S 26–10 Roll Pin 1
T 25–36 Pop Rivet 2 T 25–36 Pop Rivet 2
W 26–45 Roll Pin 1 W 26–45 Roll Pin 1
Y 7900–1–102 Velcro Pile Tape 1 Y 7900–1–102 Velcro Pile Tape 1

49
Litter Assembly, Pneumatic Fowler, Stationary Foot End

Assembly part number 926–71/926–171 AY (926–171)

(reference only) AB (926–71)

(926–171) AY

(926–71) AB
AY (926–171)

AB (926–71)

AY (926–171)

AB (926–71)

50
Litter Assembly, Pneumatic Fowler, Stationary Foot End

926–71 (Non X–Ray) 926–171 (X–Ray)

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A (page 32) Frame Assembly 1 A (page 32) Frame Assembly 1
B 1010–31–78 Gas Cylinder 2 B 1010–31–78 Gas Cylinder 2
C (page 54) Fowler Assembly 1 C (page 55) Fowler Assembly 1
D 946–34–41 Skin Supt. Angle, Lt. 1 D 946–34–41 Skin Supt. Angle, Lt. 1
E 946–34–42 Skin Supt. Angle, Rt. 1 E 946–34–42 Skin Supt. Angle, Rt. 1
F 946–34–40 Skin Supt. Angle, End 1 F 946–34–40 Skin Supt. Angle, End 1
H 926–34–31 Skin 1 H 926–34–31 Skin 1
J 966–34–40 Pivot Sleeve 2 J 966–34–40 Pivot Sleeve 2
K 16–12 Flexlock Nut 2 K 16–12 Flexlock Nut 2
L 966–34–41 Pivot Nut 2 L 966–34–41 Pivot Nut 2
M 25–55 Pop Rivet 23 M 25–55 Pop Rivet 23
N 946–35–36 Cylinder Mtg. Ass’y, Rt. 1 N 946–35–36 Cylinder Mtg. Ass’y, Rt. 1
P 8–31 Hex Soc. Shldr. Bolt 2 P 8–31 Hex Soc. Shldr. Bolt 2
R 946–35–37 Cylinder Mtg. Ass’y, Lt. 1 R 946–35–37 Cylinder Mtg. Ass’y, Lt. 1
S 926–35–47 Handle 1 S 926–35–47 Handle 1
T 52–15 Spacer 2 T 52–15 Spacer 2
W 946–35–38 Cylinder Extension 2 W 946–35–38 Cylinder Extension 2
Y 946–35–39 Retention Pin 2 Y 946–35–39 Retention Pin 2
Z 28–77 Retaining Ring 2 Z 28–77 Retaining Ring 2
AA 393–53–20 Strap Anchor 4 AA 393–53–20 Strap Anchor 4
AB 25–77 Pop Rivet 10 AB 25–77 Pop Rivet 7
AC 7900–1–102 Velcro Pile Tape A/R AC 7900–1–102 Velcro Pile Tape A/R
AD 946–35–50 Label 1 AD 946–35–50 Label 1
AE 25–40 Pop Rivet 8 AE 25–40 Pop Rivet 4
AF 11–108 Washer 2 AF 11–108 Washer 2
AH 8–30 Hex Soc. Shldr. Bolt 2 AH 8–30 Hex Soc. Shldr. Bolt 2
AJ 16–2 Fiberlock Nut 2 AJ 16–2 Fiberlock Nut 2
AK 11–1 Washer 2 AK 11–1 Washer 2
AL 21–119 Set Screw 2 AL 21–119 Set Screw 2
AM 16–36 Nylock Nut 2 AM 16–36 Nylock Nut 2
AN 926–33–39 Midsection Skin 1 AN 926–33–21 Midsection Skin 1
AP 946–1–285 Ground Cable 2 AP 946–1–285 Ground Cable 2
AR 25–50 Pop Rivet 6 AR 25–50 Pop Rivet 6
AS 926–1–46 Angle Support 2 AS 946–1–45 Angle Support, Rt. 1
AT 946–1–44 Angle Support, Lt. 1
AW 926–33–22 Midsection Supt. Angle 1
AY 25–75 Pop Rivet 6

51
Litter Assembly, Pneumatic Fowler, Stationary Foot End

Assembly part number 946–71/946–171

(reference only)

(946–71) AB

(946–171) AZ

AZ AB

(946–71) AB

(946–171) AZ

52
Litter Assembly, Pneumatic Fowler, Stationary Foot End

946–71 (Non X–Ray) 946–171 (X–Ray)

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A (page 34) Frame Assembly 1 A (page 34) Frame Assembly 1
B 1010–31–78 Gas Cylinder 2 B 1010–31–78 Gas Cylinder 2
C (page 54) Fowler Assembly 1 C (page 55) Fowler Assembly 1
D 946–34–41 Skin Supt. Angle, Lt. 1 D 946–34–41 Skin Supt. Angle, Lt. 1
E 946–34–42 Skin Supt. Angle, Rt. 1 E 946–34–42 Skin Supt. Angle, Rt. 1
F 946–34–40 Skin Supt. Angle, End 1 F 946–34–40 Skin Supt. Angle, End 1
H 926–34–31 Skin 1 H 926–34–31 Skin 1
J 966–34–40 Pivot Sleeve 2 J 966–34–40 Pivot Sleeve 2
K 16–12 Flexlock Nut 2 K 16–12 Flexlock Nut 2
L 966–34–41 Pivot Nut 2 L 966–34–41 Pivot Nut 2
M 25–55 Pop Rivet 27 M 25–55 Pop Rivet 27
N 946–35–36 Cylinder Mtg. Ass’y, Rt. 1 N 946–35–36 Cylinder Mtg. Ass’y, Rt. 1
P 8–31 Hex Soc. Shldr. Bolt 2 P 8–31 Hex Soc. Shldr. Bolt 2
R 946–35–37 Cylinder Mtg. Ass’y, Lt. 1 R 946–35–37 Cylinder Mtg. Ass’y, Lt. 1
S 926–35–47 Handle 1 S 946–35–47 Handle 1
T 52–15 Spacer 2 T 52–15 Spacer 2
W 946–35–38 Cylinder Extension 2 W 946–35–38 Cylinder Extension 2
Y 946–35–39 Retention Pin 2 Y 946–35–39 Retention Pin 2
Z 28–77 Retaining Ring 2 Z 28–77 Retaining Ring 2
AA 393–53–20 Strap Anchor 4 AA 393–53–20 Strap Anchor 4
AB 25–77 Pop Rivet 10 AB 25–77 Pop Rivet 6
AC 7900–1–102 Velcro Pile Tape A/R AC 7900–1–102 Velcro Pile Tape A/R
AD 946–35–50 Label 1 AD 946–35–50 Label 1
AE 25–40 Pop Rivet 8 AE 25–40 Pop Rivet 4
AF 11–108 Washer 2 AF 11–108 Washer 2
AH 946–1–162 Oval Insert 2 AH 946–1–162 Oval Insert 2
AJ 946–33–39 Midsection Skin 1 AJ 946–33–40 Midsection Skin 1
AK 8–30 Hex Soc. Shldr. Bolt 2 AK 8–30 Hex Soc. Shldr. Bolt 2
AL 16–2 Fiberlock Nut 2 AL 16–2 Fiberlock Nut 2
AM 11–1 Washer 2 AM 11–1 Washer 2
AN 21–119 Set Screw 2 AN 21–119 Set Screw 2
AP 16–36 Nylock Nut 2 AP 16–36 Nylock Nut 2
AR 946–1–285 Ground Cable 2 AR 946–1–285 Ground Cable 2
AS 25–50 Pop Rivet 6 AS 25–50 Pop Rivet 6
AT 926–1–46 Angle Support 2 AT 946–1–45 Angle Support, Rt. 1
AW 946–1–44 Angle Support, Lt. 1
AY 946–34–43 Midsection Supt. Angle 1
AZ 25–75 Pop Rivet 6

53
 Pneumatic Fowler Assembly

Assembly part numbers 926–75–55 & 946–75–55

(reference only)

926–75–55 946–75–55
Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 926–32–27 Fowler Plug, Right 1 A 926–32–27 Fowler Plug, Right 1
B 926–32–28 Fowler Plug, Left 1 B 926–32–28 Fowler Plug, Left 1
C 926–33–38 Fowler Skin, Alum. 1 C 946–33–38 Fowler Skin, Alum. 1
D 926–33–60 Fowler Tube 1 D 946–33–60 Fowler Tube 1
E 25–55 Pop Rivet 10 E 25–55 Pop Rivet 10
F 25–77 Pop Rivet 2 F 25–77 Pop Rivet 2
H 946–35–51 Yoke Housing, Rt. 1 H 946–35–51 Yoke Housing, Rt. 1
J 946–35–52 Yoke Housing, Lt. 1 J 946–35–52 Yoke Housing, Lt. 1
K 16–36 Nylock Hex Nut 4 K 16–36 Nylock Hex Nut 4
L 7–25 Truss Hd. Mach. Screw 4 L 7–25 Truss Hd. Mach. Screw 4
M 946–35–23 Cam 2 M 946–35–23 Cam 2
N 26–137 Groove Pin 2 N 26–137 Groove Pin 2
P 946–35–24 Yoke 2 P 946–35–24 Yoke 2
R 946–35–25 Liner 4 R 946–35–25 Liner 4
S 28–76 Retaining Ring 2 S 28–76 Retaining Ring 2
T 946–35–43 Handle Assembly 1 T 946–35–43 Handle Assembly 1
W 15–27 Hex Jam Nut 2 W 15–27 Hex Jam Nut 2
Z 2–36 Rd. Hd. Mach Screw 2 Z 2–36 Rd. Hd. Mach Screw 2
BA 11–1 Flat Washer 2 BA 11–1 Flat Washer 2
BB 16–3 Nylock Nut 2 BB 16–3 Nylock Nut 2
BC 16–35 Nylock Nut 2 BC 16–35 Nylock Nut 2

54
 Pneumatic Fowler Assembly, X–Ray

Assembly part numbers 926–175–55 & 946–175–55

(reference only)

926–175–55 946–175–55
Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 926–32–27 Fowler Plug, Right 1 A 926–32–27 Fowler Plug, Right 1
B 926–32–28 Fowler Plug, Left 1 B 926–32–28 Fowler Plug, Left 1
C 926–133–21 Fowler Skin 1 C 946–133–21 Fowler Skin 1
D 926–33–60 Fowler Tube 1 D 946–33–60 Fowler Tube 1
E 25–77 Pop Rivet 10 E 25–77 Pop Rivet 7
F 25–69 Pop Rivet 2 F 25–69 Pop Rivet 2
H 946–35–21 Yoke Housing, Rt. 1 H 946–35–21 Yoke Housing, Rt. 1
J 946–35–22 Yoke Housing, Lt. 1 J 946–35–22 Yoke Housing, Lt. 1
K 16–36 Nylock Hex Nut 4 K 16–36 Nylock Hex Nut 4
L 7–27 Truss Hd. Mach. Screw 4 L 7–27 Truss Hd. Mach. Screw 4
M 946–35–23 Cam 2 M 946–35–23 Cam 2
N 26–137 Groove Pin 2 N 26–137 Groove Pin 2
P 946–35–24 Yoke 2 P 946–35–24 Yoke 2
R 946–35–25 Liner 4 R 946–35–25 Liner 4
S 28–76 Retaining Ring 2 S 28–76 Retaining Ring 2
T 946–35–43 Handle Assembly 1 T 946–35–43 Handle Assembly 1
W 15–27 Hex Jam Nut 2 W 15–27 Hex Jam Nut 2
Y 2–36 Rd. Hd. Mach Screw 2 Y 2–36 Rd. Hd. Mach Screw 2
Z 11–1 Flat Washer 2 Z 11–1 Flat Washer 2
BA 16–3 Nylock Nut 2 BA 16–3 Nylock Nut 2
BB 16–35 Nylock Nut 2 BB 16–35 Nylock Nut 2

55
 Litter Assembly, Crank Fowler, Crank Knee Gatch

Assembly part number 926–34/926–134

(reference only

56
 Litter Assembly, Crank Fowler, Crank Knee Gatch

926–34 (Non–X–Ray) 926–134 (X–Ray)

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A (page 32 & 33) Basic Frame Ass’y 1 A (page 32 & 33) Basic Frame Ass’y 1
B (page 46) Fowler Assembly 1 B (page 48) Fowler Assembly 1
C (page 49) Fowler Crankscrew Ass’y 1 C (page 49) Crankscrew Assembly 1
D (page 61) Gatch Crankscrew Ass’y 1 D (page 61) Gatch Crankscrew Ass’y 1
E (page 60) Gatch Assembly 1 E (page 60) Gatch Assembly 1
F 946–1–285 Ground Cable 2 F 946–1–285 Ground Cable 2
H 16–11 Hex Castle Nut 3 H 16–11 Hex Castle Nut 3
J 966–34–40 Pivot Sleeve 4 J 966–34–40 Pivot Sleeve 4
K 966–34–41 Pivot 4 K 966–34–41 Pivot 4
L 8–24 Hex Soc. Shoulder Bolt 2 L 8–24 Hex Soc. Shoulder Bolt 2
M 14–21 Washer 2 M 14–21 Washer 2
N 926–1–39 Bracket, Rt. 1 N 926–1–39 Bracket, Rt. 1
P 926–1–40 Bracket, Lt. 1 P 926–1–40 Bracket, Lt. 1
R 938–1–166 Modified Bolt 2 R 938–1–166 Modified Bolt 2
S 15–13 Hex Nut 2 S 15–13 Hex Nut 2
T 25–50 Pop Rivet 6 T 25–50 Pop Rivet 6
W 4–39 Soc. Hd. Cap Screw 1 W 4–39 Soc. Hd. Cap Screw 1
Y 11–108 Flat Washer 4 Y 11–108 Flat Washer 4
Z 8–31 Shoulder Bolt 2 Z 8–31 Shoulder Bolt 2
AA 4–105 Soc. Hd. Cap Screw 1 AA 4–105 Soc. Hd. Cap Screw 1
AB 7900–1–102 Velcro Pile Tape As Req’d AB 7900–1–102 Velcro Pile Tape As Req’d
AC 946–1–64 Label, Fowler 1 AC 946–1–64 Label, Fowler 1
AD 946–1–65 Label, Gatch 1 AD 946–1–65 Label, Gatch 1
AE 25–40 Pop Rivet 8 AE 25–40 Pop Rivet 4
AF 460–2–32 Grounding Cable 2 AF 460–2–32 Grounding Cable 2
AH 25–69 Pop Rivet 2 AH 25–69 Pop Rivet 2
AJ 11–64 Washer 2 AJ 11–64 Washer 2
AK 8–32 Shoulder Bolt 2 AK 8–32 Shoulder Bolt 2
AL 393–53–20 Strap Anchor 2 AL 393–53–20 Strap Anchor 2
AN 926–1–37 Midsection Spacer 2 AM 926–33–22 Angle Support 1
AP 926–33–39 Midsection Skin 1 AP 926–33–21 Midsection Skin 1
AR 16–12 Flexlock Nut 1 AR 16–12 Flexlock Nut 1
AS 946–34–18 Support 2 AS 946–34–18 Support 2
AT 25–75 Pop Rivet 6 AT 25–75 Pop Rivet 9
AY 52–6 Spacer 2 AZ 926–33–17 Spacer 2
AZ 926–33–17 Spacer 2 BA 926–33–36 Bearing 2
BA 926–33–36 Bearing 2 BB 946–33–26 Pivot Linkage 2
BB 946–33–26 Pivot Linkage 2 BC 16–36 Nylock Nut 4
BC 16–36 Nylock Nut 4 BD 52–17 Spacer 2
BD 52–17 Spacer 2 BE 946–34–12 Lever 1
BE 946–34–12 Lever 1

57
 Litter Assembly, Crank Fowler, Crank Knee Gatch

Assembly part number 946–34/946–134

(reference only)

58
 Litter Assembly, Crank Fowler, Crank Knee Gatch

946–34 (Non–X–Ray) 946–134 (X–Ray)

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A (page 34 & 35) Basic Frame Ass’y 1 A (page 34 & 35) Basic Frame Ass’y 1
B (page 46) Fowler Assembly 1 B (page 48) Fowler Assembly 1
C (page 49) Fowler Crankscrew Ass’y 1 C (page 49) Crankscrew Assembly 1
D (page 61) Gatch Crankscrew Ass’y 1 D (page 61) Gatch Crankscrew Ass’y 1
E (page 60) Gatch Assembly 1 E (page 60) Gatch Assembly 1
F 926–1–37 Midsection Spacer 2 H 16–11 Hex Castle Nut 3
H 16–11 Hex Castle Nut 3 J 966–34–40 Pivot Sleeve 4
J 966–34–40 Pivot Sleeve 4 K 966–34–41 Pivot 4
K 966–34–41 Pivot 4 L 8–24 Hex Soc. Shoulder Bolt 2
L 8–24 Hex Soc. Shoulder Bolt 2 M 14–21 Washer 2
M 14–21 Washer 2 N 926–1–39 Bracket, Rt. 1
N 926–1–39 Bracket, Rt. 1 P 926–1–40 Bracket, Lt. 1
P 926–1–40 Bracket, Lt. 1 R 938–1–166 Modified Bolt 2
R 938–1–166 Modified Bolt 2 S 15–13 Hex Nut 2
S 15–13 Hex Nut 2 T 25–50 Pop Rivet 6
T 25–50 Pop Rivet 6 W 4–39 Soc. Hd. Cap Screw 1
W 4–39 Soc. Hd. Cap Screw 1 Y 11–108 Flat Washer 4
Y 11–108 Flat Washer 4 Z 8–31 Shoulder Bolt 2
Z 8–31 Shoulder Bolt 2 AA 946–33–33 Clip 2
AA 946–33–33 Clip 2 AB 7900–1–102 Velcro Pile Tape As Req’d
AB 7900–1–102 Velcro Pile Tape As Req’d AC 946–1–64 Label, Fowler 1
AC 946–1–64 Label, Fowler 1 AD 946–1–65 Label, Gatch 1
AD 946–1–65 Label, Gatch 1 AE 25–40 Pop Rivet 4
AE 25–40 Pop Rivet 8 AF 460–2–32 Grounding Cable 2
AF 460–2–32 Grounding Cable 2 AH 25–69 Pop Rivet 2
AH 25–69 Pop Rivet 2 AJ 11–64 Washer 2
AJ 11–64 Washer 2 AK 8–32 Shoulder Bolt 2
AK 8–32 Shoulder Bolt 2 AL 393–53–20 Strap Anchor 2
AL 393–53–20 Strap Anchor 2 AM 25–75 Pop Rivet 9
AM 25–75 Pop Rivet 6 AN 946–33–40 Midsection Skin 1
AN 946–33–39 Midsection Skin 1 AR 16–12 Flexlock Nut 1
AP 52–6 Spacer 2 AS 946–34–18 Support 2
AR 16–12 Flexlock Nut 1 AT 926–33–17 Spacer 2
AS 946–34–18 Support 2 AW 946–33–26 Pivot Linkage 2
AT 926–33–17 Spacer 2 AY 926–33–36 Bearing 2
AW 946–33–26 Pivot Linkage 2 AZ 25–38 Pop Rivet 4
AY 926–33–36 Bearing 2 BA 946–34–12 Lever 1
AZ 25–38 Pop Rivet 4 BB 4–105 Soc. Hd. Cap Screw 1
BA 946–34–12 Lever 1 BC 16–36 Nylock Nut 4
BB 4–105 Soc. Hd. Cap Screw 1 BD 52–17 Spacer 2
BC 16–36 Nylock Nut 4 BE 946–1–285 Ground Cable 2
BD 52–17 Spacer 2 BF 946–34–43 Midsection Support 1
BE 946–1–285 Ground Cable 2

59
 Knee Gatch Assembly
Assembly part numbers 926–34–16 & 946–34–16
(reference only)

BOTTOM VIEW

926–34–16 946–34–16
Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 926–34–30 Lever Assembly 1 A 946–34–30 Lever Assembly 1
B 926–34–45 Calf Section Tube 1 B 946–34–45 Calf Section Tube 1
C 926–34–23 Calf Section Skin 1 C 946–34–23 Calf Section Skin 1
D 926–34–22 Thigh Section Tube 1 D 946–34–22 Thigh Section Tube 1
E 926–34–17 Thigh Section Skin 1 E 946–34–17 Thigh Section Skin 1
F 946–34–26 Guide 2 F 946–34–26 Guide 2
H 389–32–13 Hinge 1 H 389–34–6 Hinge 1
J 25–55 Pop Rivet 12 J 25–55 Pop Rivet 12
K 25–76 Pop Rivet 2 K 25–76 Pop Rivet 2
L 22–7 Drive Screw 4 L 22–7 Drive Screw 4
M 393–53–20 Strap Anchor 2 M 393–53–20 Strap Anchor 2
N 25–77 Pop Rivet 4 N 25–77 Pop Rivet 4
P 25–79 Pop Rivet 6 P 25–79 Pop Rivet 8
R 946–34–33 Stand Clip 1 R 946–34–33 Stand Clip 1
S 25–38 Pop Rivet 2 S 25–38 Pop Rivet 2
T 926–34–29 Stand Assembly 1 T 946–34–29 Stand Assembly 1
W 16–16 Hex Nut 2 W 16–16 Hex Nut 2
Y 14–2 Nylon Washer 2 Y 14–2 Nylon Washer 2
Z 2–23 Rd. Hd. Mach. Screw 2 Z 2–23 Rd. Hd. Mach. Screw 2

60
946–34–10 & 946–34–52 Knee Gatch Crankscrew Ass’y

946–34–10 (used on 926 stretchers) 946–34–52

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 946–33–18 Crank Disc 1 A 946–33–18 Crank Disc 1
B 946–33–28 Crank Assembly 1 B 946–33–28 Crank Assembly 1
C 26–45 Roll Pin 1 C 26–45 Roll Pin 1
D 26–14 Roll Pin 2 D 26–14 Roll Pin 2
E 81–176 Thrust Washer 1 E 81–176 Thrust Washer 1
F 81–175 Thrust Bearing 1 F 81–175 Thrust Bearing 1
H 81–174 Thrust Washer 2 H 81–174 Thrust Washer 2
J 938–1–175 Bearing Assembly 1 J 938–1–175 Bearing Assembly 1
K 25–36 Pop Rivet 2 K 25–36 Pop Rivet 2
L 946–33–33 Clip 1 L 946–33–33 Clip 1
M 938–1–177 Knob 1 M 938–1–177 Knob 1
N 378–24–29 Shoulder Bolt 1 N 378–24–29 Shoulder Bolt 1
P 16–6 Kep Nut 1 P 16–6 Kep Nut 1
R 946–34–25 Knee Gatch Screw 1 R 946–34–25 Knee Gatch Screw 1
S 946–33–31 Screw Cover Assembly 1 S 946–34–64 Screw Cover Assembly 1
T 946–34–32 Extension Tube Ass’y 1 T 946–34–32 Extension Tube Ass’y 1
Y 26–10 Roll Pin 2 Y 26–10 Roll Pin 2
AA 7900–1–101 Velcro Pile Tape 1 AA 7900–1–101 Velcro Pile Tape 1
AB 946–34–36 Label 1 AB 946–34–67 Label 1

61
Litter Assembly, Pneumatic Fowler, Crank Knee Gatch

Assembly part number 926–75/926–175 (reference only)

62
Litter Assembly, Pneumatic Fowler, Crank Knee Gatch

926–75 (Non–X–Ray) 926–175 (X–Ray)

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A (page 54) Fowler Assembly 1 A (page 55) Fowler Assembly 1
B (page 32 & 33) Basic Frame Ass’y 1 B (page 32 & 33) Basic Frame Ass’y 1
C 1010–31–78 Gas Cylinder 2 C 1010–31–78 Gas Cylinder 2
D (page 61) Gatch Crankscrew Ass’y 1 D (page 61) Gatch Crankscrew Ass’y 1
E (page 60) Gatch Assembly 1 E (page 60) Gatch Assembly 1
F 926–1–46 Angle Support 2 F 946–1–45 Angle Support, Rt. 1
J 966–34–40 Pivot Sleeve 4 H 946–1–44 Angle Support, Lt. 1
K 966–34–41 Pivot Nut 4 J 966–34–40 Pivot Sleeve 4
L 16–11 Hex Castle Nut 1 K 966–34–41 Pivot Nut 4
M 25–50 Pop Rivet 6 L 16–11 Hex Castle Nut 1
N 938–1–166 Modified Bolt 1 M 25–50 Pop Rivet 6
P 15–13 Hex Nut 1 N 938–1–166 Modified Bolt 1
R 946–1–285 Ground Cable 2 P 15–13 Hex Nut 1
S 4–39 Soc. Hd. Cap Screw 1 R 946–1–285 Ground Cable 2
T 11–108 Flat Washer 4 S 4–39 Soc. Hd. Cap Screw 1
W 25–55 Pop Rivet 1 T 11–108 Flat Washer 4
Y 7900–1–102 Velcro Pile Tape A/R W 25–55 Pop Rivet 1
Z 926–1–162 Oval Insert 1 Y 7900–1–102 Velcro Pile Tape A/R
AA 946–1–65 Knee Gatch Label 1 Z 926–1–162 Oval Insert 1
AB 25–40 Pop Rivet 8 AA 946–1–65 Knee Gatch Label 1
AC 8–31 Shoulder Bolt 2 AB 25–40 Pop Rivet 4
AD 8–32 Shoulder Bolt 2 AC 8–31 Shoulder Bolt 2
AE 393–53–20 Strap Anchor 2 AD 8–32 Shoulder Bolt 2
AF 926–33–39 Midsection Skin 1 AE 393–53–20 Strap Anchor 2
AH 25–77 Pop Rivet 4 AF 926–33–21 Midsection Skin 1
AJ 16–12 Flexlock Nut 2 AH 25–77 Pop Rivet 4
AK 946–35–36 Cylinder Mtg. Ass’y, Rt. 1 AJ 16–12 Flexlock Nut 2
AL 946–35–37 Cylinder Mtg. Ass’y, Lt. 1 AK 946–35–36 Cylinder Mtg. Ass’y, Rt. 1
AM 11–1 Washer 2 AL 946–35–37 Cylinder Mtg. Ass’y, Lt. 1
AN 926–35–47 Handle 1 AM 11–1 Washer 2
AP 52–15 Spacer 2 AN 926–35–47 Handle 1
AR 946–35–38 Cylinder Extension 2 AP 52–15 Spacer 2
AS 946–35–39 Retention Pin 2 AR 946–35–38 Cylinder Extension 2
AT 28–77 Retaining Ring 2 AS 946–35–39 Retention Pin 2
AW 946–35–50 Label 1 AT 28–77 Retaining Ring 2
AY 25–76 Pop Rivet 2 AW 946–35–50 Label 1
AZ 946–34–18 Support 2 AY 25–76 Pop Rivet 5
BA 8–30 Shoulder Bolt 2 AZ 946–34–18 Support 2
BB 16–2 Fiberlock Nut 2 BA 8–30 Shoulder Bolt 2
BC 21–119 Set Screw 2 BB 16–2 Fiberlock Nut 2
BD 16–36 Nylock Nut 2 BC 21–119 Set Screw 2
BE 52–17 Spacer 2 BD 16–36 Nylock Nut 2
BF 946–34–12 Lever 1 BE 52–17 Spacer 2
BH 4–105 Soc. Hd. Cap Screw 1 BF 946–34–12 Lever 1
BJ 16–12 Flexlock Nut 1 BH 4–105 Soc. Hd. Cap Screw 1
BJ 16–12 Flexlock Nut 1
BK 926–33–22 Midsection Supt. Angle 1

63
Litter Assembly, Pneumatic Fowler, Crank Knee Gatch

Assembly part number 946–75/946–175 (reference only)

64
Litter Assembly, Pneumatic Fowler, Crank Knee Gatch

946–75 (Non–X–Ray) 946–175 (X–Ray)

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A (page 54) Fowler Assembly 1 A (page 55) Fowler Assembly 1
B (page 34 & 35) Basic Frame Ass’y 1 B (page 34 & 35) Basic Frame Ass’y 1
C 1010–31–78 Gas Cylinder 2 C 1010–31–78 Gas Cylinder 2
D (page 61) Gatch Crankscrew Ass’y 1 D (page 61) Gatch Crankscrew Ass’y 1
E (page 60) Gatch Assembly 1 E (page 60) Gatch Assembly 1
F 926–1–46 Angle Support 2 F 946–1–45 Angle Support, Rt. 1
J 966–34–40 Pivot Sleeve 4 H 946–1–44 Angle Support, Lt. 1
K 966–34–41 Pivot Nut 4 J 966–34–40 Pivot Sleeve 4
L 16–11 Hex Castle Nut 1 K 966–34–41 Pivot Nut 4
M 25–50 Pop Rivet 6 L 16–11 Hex Castle Nut 1
N 938–1–166 Modified Bolt 1 M 25–50 Pop Rivet 6
P 15–13 Hex Nut 1 N 938–1–166 Modified Bolt 1
S 4–39 Soc. Hd. Cap Screw 1 P 15–13 Hex Nut 1
T 11–108 Flat Washer 4 R 946–34–43 Midsection Skin Supt. 1
W 25–55 Pop Rivet 2 S 4–39 Soc. Hd. Cap Screw 1
Y 7900–1–102 Velcro Pile Tape A/R T 11–108 Flat Washer 4
Z 946–1–162 Oval Insert 1 W 25–55 Pop Rivet 2
AA 946–1–65 Knee Gatch Label 1 Y 7900–1–102 Velcro Pile Tape A/R
AB 25–40 Pop Rivet 8 Z 946–1–162 Oval Insert 1
AC 8–31 Shoulder Bolt 2 AA 946–1–65 Knee Gatch Label 1
AD 8–32 Shoulder Bolt 2 AB 25–40 Pop Rivet 4
AE 393–53–20 Strap Anchor 2 AC 8–31 Shoulder Bolt 2
AF 946–33–39 Midsection Skin 1 AD 8–32 Shoulder Bolt 2
AH 25–77 Pop Rivet 6 AE 393–53–20 Strap Anchor 2
AJ 16–12 Flexlock Nut 2 AF 946–33–40 Midsection Skin 1
AK 946–35–36 Cylinder Mtg. Ass’y, Rt. 1 AH 25–77 Pop Rivet 9
AL 946–35–37 Cylinder Mtg. Ass’y, Lt. 1 AJ 16–12 Flexlock Nut 2
AM 21–119 Set Screw 2 AK 946–35–36 Cylinder Mtg. Ass’y, Rt. 1
AN 946–35–47 Handle 1 AL 946–35–37 Cylinder Mtg. Ass’y, Lt. 1
AP 52–15 Spacer 2 AM 21–119 Set Screw 2
AR 946–35–38 Cylinder Extension 2 AN 946–35–47 Handle 1
AS 946–35–39 Retention Pin 2 AP 52–15 Spacer 2
AT 28–77 Retaining Ring 2 AR 946–35–38 Cylinder Extension 2
AW 946–35–50 Label 1 AS 946–35–39 Retention Pin 2
AY 946–34–18 Support 2 AT 28–77 Retaining Ring 2
AZ 8–30 Shoulder Bolt 2 AW 946–35–50 Label 1
BA 16–2 Fiberlock Nut 2 AY 946–34–18 Support 2
BB 11–1 Washer 2 AZ 8–30 Shoulder Bolt 2
BC 16–36 Nylock Nut 4 BA 16–2 Fiberlock Nut 2
BD 52–17 Spacer 2 BB 11–1 Washer 2
BE 946–34–12 Lever 1 BC 16–36 Nylock Nut 4
BF 4–105 Soc. Hd. Cap Screw 1 BD 52–17 Spacer 2
BH 16–12 Flexlock Nut 1 BE 946–34–12 Lever 1
BJ 946–1–285 Ground Cable 2 BF 4–105 Soc. Hd. Cap Screw 1
BH 16–12 Flexlock Nut 1
BJ 946–1–285 Ground Cable 2

65
Litter Assembly, Full–Length X–Ray, Pneumatic Fowler

Assembly part number 926–127–31

(reference only)

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A (page 67) Basic Frame Ass’y 1 Z 28–77 Retaining Ring 2
B 1010–31–78 Gas Cylinder 2 AA 393–53–20 Strap Anchor 4
C (page 55) Fowler Assembly 1 AB 25–69 Pop Rivet 11
D 946–34–41 Skin Supt. Angle, Lt. 1 AC 7900–1–102 Velcro Pile Tape 25”
E 946–34–42 Skin Supt. Angle, Rt. 1 AD 946–35–50 Label 1
F 946–34–40 Skin Supt. Angle, End 1 AE 25–76 Pop Rivet 8
H 926–128–59 Fiberresin Skin 1 AF 11–108 Flat Washer 2
J 966–34–40 Pivot Sleeve 2 AH 8–30 Shoulder Bolt 2
K 16–35 Nylock Nut 2 AJ 16–2 Nylock Nut 2
L 966–34–41 Pivot Nut 2 AK 11–1 Flat Washer 2
M 25–55 Pop Rivet 20 AL 21–119 Set Screw 2
N 946–35–36 Cyl. Mtg. Ass’y, Rt. 1 AM 16–36 Nylock Nut 2
P 8–31 Shoulder Bolt 2 AN 926–128–50 Roller Rail 2
R 946–35–37 Cyl. Mtg. Ass’y, Lt. 1 AP 3–2 Hex Hd. Cap Screw 4
S 926–35–47 Handle 1 AR 55–8 Threaded Insert 4
T 52–15 Spacer 2 AS (page 70) Tray Assembly 1
W 946–35–38 Cylinder Extension 2 AT 37–22 Hole Plug 4
Y 946–35–39 Retention Pin 2 AW 946–35–30 Fowler Supt. Brkt. 2

66
Litter Frame Ass’y, Full–Length X–Ray, Pneumatic Fowler

Assembly part number 926–127–15 (reference only)

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 946–1–43 Side Tube, Left 1 W 4–51 Soc. Head Cap Screw 4
B 946–1–42 Side Tube, Right 1 Y 30–21 Rubber Cap 4
C 946–1–37 Corner, Head End, Left 2 Z 926–1–162 Oval Insert 2
D 946–1–38 Corner, Head End, Right 2 AA 946–1–35 Board Support 4
E 926–1–26 Crosstube 2 AB 25–55 Pop Rivet 2
F 4–54 Hex Button Cap Screw 16 AC 46–1 Sq. Hd. Set Screw 2
H 16–11 Hex Castle Nut 18 AD 926–1–28 Crosstube, Push But. 1
J 926–128–53 Hd. Standoff Ass’y, Rt. 2 AE 946–22–11 Pushbutton Cover 1
K 926–128–42 Foot End Standoff Ass’y 2 AF 23–11 Pan Hd. Mach. Scr. 2
L 390–9–13 Top Support Tube Ass’y 2 AH 926–1–46 Angle Support 2
M 42–7 Collar Assembly 4 AJ 926–128–60 Support Angle 2
N 37–30 Hole Plug 4 AK 926–128–43 Spacer 2
P 25–50 Pop Rivet 16 AL 3–9 Hex Hd. Cap Screw 2
R 946–1–36 Supt. Tube & Roller Ass’y 2 AM 16–11 Flexlock Nut 2
S 938–1–155 Carrier Tube Support Bar 2 AN 946–1–285 Ground Cable 2
T 11–3 Washer 6

67
 Litter Assembly, Full–Length X–Ray, Manual Fowler

Assembly part number 926–128–32 (reference only)

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A (page 69) Basic Frame Ass’y 1 S 926–32–70 Manual Fowler Nut 2
B 926–332–26 Brace Assembly 1 T 14–19 Flat Washer 2
C (page 41) Fowler Assembly 1 W (page 70) Tray Assembly 1
D 946–34–41 Skin Supt. Angle, Lt. 1 Y 37–22 Hole Plug 4
E 946–34–42 Skin Supt. Angle, Rt. 1 Z 55–8 Threaded Insert 4
F 946–34–40 Skin Supt. Angle, End 1 AA 393–53–20 Strap Anchor 4
H 926–128–59 Fiberresin Skin 1 AB 25–69 Pop Rivet 11
J 966–34–40 Pivot Sleeve 2 AC 7900–1–102 Velcro Pile Tape 25”
K 650–1–48 Bumper 2 AD 3–2 Hex Hd. Cap Screw 4
L 966–34–41 Pivot Nut 2 AE 25–76 Pop Rivet 8
M 25–55 Pop Rivet 14 AF 11–108 Flat Washer 2
N 946–332–31 Hole Plug 2 AH 926–128–50 Roller Rail 2
P 8–31 Shoulder Bolt 2 AJ 16–36 Nylock Nut 2
R 1–56 Flat Hd. Mach. Screw 2

68
Litter Frame Assembly, Full–Length X–Ray, Manual Fowler

Assembly part number 926–128–15 (reference only)

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 946–1–43 Side Tube, Left 1 Y 30–21 Rubber Cap 4
B 946–1–42 Side Tube, Right 1 Z 926–1–162 Oval Insert 2
C 946–1–37 Corner, Hd. End, Lt. 2 AA 946–1–35 Board Support 4
D 946–1–38 Corner, Hd. End, Rt. 2 AB 25–55 Pop Rivet 2
E 926–1–26 Crosstube 2 AC 46–1 Sq. Hd. Set Screw 2
F 4–54 Hex But. Cap Screw 16 AD 926–1–28 Crosstube, Push But. 1
H 16–11 Hex Castle Nut 18 AE 946–22–11 Push Button Cover 1
J 926–128–64 Man. Fow. Standoff, Rt. 1 AF 23–11 Pan Hd. Mach. Screw 2
K 926–128–42 Foot End Standoff Ass’y 2 AH 926–1–46 Angle Support 2
L 390–9–13 Top Supt. Tube Ass’y 2 AJ 926–128–60 Support Angle 2
M 42–7 Collar Assembly 4 AK 926–128–43 Spacer 2
N 37–30 Hole Plug 4 AL 3–9 Hex Hd. Cap Screw 2
P 25–50 Pop Rivet 16 AM 16–11 Flexlock Nut 2
R 946–1–36 Supt. Tube & Roller Ass’y 2 AN 926–128–62 Man. Fow. Standoff, Lt. 1
S 938–1–155 Carrier Tube Supt. Bar 2 AP 25–79 Pop Rivet 8
T 11–3 Washer 6 AR 946–1–285 Ground Cable 2
W 4–51 Soc. Hd. Cap Screw 4

69
 Full–Length X–Ray Tray Assembly

Assembly part number 926–128–14 (reference only)

Item Part No. Part Name Qty.

A 926–128–56 Tray 1
B 926–128–61 Adhesive Mat 1
C 926–28–53 Label 2
D 926–128–54 U Channel 2
E 926–128–49 Lever Arm 2
F 926–128–55 Pivot Block 2
H 926–128–57 Roller 4
J 2–85 Rd. Hd. Mach. Screw 4
K 2–36 Rd. Hd. Mach. Screw 8
L 921–20–24 Cap 2
M 16–3 Fiberlock Nut 12
N 26–4 Roll Pin 4
P 25–70 Pop Rivet 8
R 926–128–44 Retaining Tab 2

70
 Folddown Siderail & Bumper Assembly, Right

Assembly part number 946–26–40 2

(reference only)

2
2
HEAD END

Item Part No. Part Name Qty.

A (page 74) Siderail Assembly, Right 1
B 14–19 Washer 12
C 16–11 Flexlock Nut 1
D 14–17 Washer 1
E 4–53 Button Hd. Cap Screw 4
F 16–11 Flexlock Nut 5
H 14–17 Washer 5
J 946–1–41 Cap 1
K 919–1–71 Bumper, Right 1
L 4–56 Soc. Hd. Cap Screw 1
M 11–3 Washer 3
N 4–76 Button Hd. Cap Screw 3
P 4–53 Button Hd. Cap Screw 1
S 3–2 Hex Hd. Cap Screw 2
T 946–35–26 Modified Hex Nut 3
W 4–94 Button Hd. Cap Screw 2
Y 16–16 Fiberlock Nut 2
AA 946–31–12 Pivot 1
AB 946–26–37 Pivot Nut 1
AC 4–52 Button Hd. Cap Screw 1
AD 4–129 Button Hd. Cap Screw 1

Indicated items 4 required when used with Knee Gatch only.

 Indicated items used with crank Fowler only.
 Indicated items used with pneumatic and manual Fowlers only.
 Indicated items used with pneumatic Fowler only.
 Indicated items used with Knee Gatch only.

Indicated items used with manual Fowler option only.

71
 Folddown Siderail & Bumper Assembly, Left

Assembly part number 946–26–41

(reference only)
4 4

3
4 HEAD END
3

1
1

6 4

4 4 7

4
3

Item Part No. Part Name Qty.

A (page 74) Siderail Assembly, Left 1
B 14–19 Washer 12
C 16–11 Flexlock Nut 1
D 14–17 Washer 1
E 4–53 Button Hd. Cap Screw 4
F 16–11 Flexlock Nut 5
H 14–17 Washer 5
J 946–1–41 Cap 1
K 919–1–72 Bumper, Left 1
L 4–56 Soc. Hd. Cap Screw 1
M 11–3 Washer 3
N 4–76 Button Hd. Cap Screw 3
P 4–53 Button Hd. Cap Screw 1
S 3–2 Hex Hd. Cap Screw 2
T 946–35–26 Modified Hex Nut 3
W 4–94 Button Hd. Cap Screw 2
Y 16–16 Fiberlock Nut 2
AA 946–31–12 Pivot 1
AB 946–26–37 Pivot Nut 1
AC 4–52 Button Hd. Cap Screw 1
AD 4–129 Button Hd. Cap Screw 1

Indicated items 4 required when used with Knee Gatch only.

 Indicated items used with crank Fowler only.
 Indicated items used with pneumatic and manual Fowlers only.
 Indicated items used with pneumatic Fowler only.
 Indicated items used with Knee Gatch only.

Indicated items used with manual Fowler option only.

72
926–126–42/43 Folddown Siderail Assembly, Right/Left

FOOT END

(Left Side Shown)

Item Part No. Part Name Qty.

A 946–26–22 Top Rail 1
B 721–26–84 Round Hole Plug 5
C 25–61 Semi–Tubular Rivet 6
D 946–26–24 Upright 3
E 946–26–25 Lock Upright 1
F 946–26–12 Siderail Pivot 3
H 946–26–29 Siderail Lock Assembly 1
J 1–22 Flat Hd. Mach. Screw 2
K 946–26–35 Pivot Sleeve 1
L 399–31–16 Sleeve Bearing 6
M 946–26–26 Siderail Pivot 3
N 946–26–23 Upright, Curved 2

73
946–26–42/43 Folddown Siderail Assembly, Right/Left

FOOT END

(Right Side Is Shown)

Item Part No. Part Name Qty.

A 946–26–22 Top Rail 1
B 721–26–84 Round Hole Plug 5
C 25–61 Semi–Tubular Rivet 6
D 946–26–24 Upright 3
E 946–26–25 Lock Upright 1
F 946–26–12 Siderail Pivot 3
H 946–26–29 Siderail Lock Assembly 1
J 1–22 Flat Hd. Mach. Screw 2
K 946–26–35 Pivot Sleeve 1
L 399–31–16 Sleeve Bearing 6
M 946–26–26 Siderail Pivot 3
N 946–26–23 Upright, Curved 2

74
 Cribstyle Siderail & Bumper Assembly, Right

Assembly part number 946–225–36

(reference only)

HEAD END

Item Part No. Part Name Qty.

A (page 77) Siderail Assembly 1
B 919–1–71 Bumper, Right 1
C 946–1–41 Cap 1
D 946–225–35 Latch Assembly, Right 1
F 946–1–70 Label 1
H 4–53 Button Hd. Cap Screw 4
J 16–11 Flexlock Nut 4
K 14–19 Washer 5
L 4–129 But. Hd. Cap Screw, Modified 1
M 16–11 Flex Nut 2
N 14–19 Washer 2
P 17–4 Acorn Nut 1
R 4–53 Button Hd. Cap Screw 2
S 4–76 But. Hd. Cap Screw, Modified 3
T 946–31–12 Pivot 1
W 4–94 But. Hd. Cap Screw, Modified 1
Y 16–16 Fiberlock Nut 2
Z 3–2 Hex Hd. Cap Screw 2
AA 4–94 Button Hd. Cap Screw 2
AB 11–3 Washer 2
AC 946–35–26 Modified Hex Nut 4
AD 4–130 Button Hd. Cap Screw 1

 Indicated items used with pneumatic and manual Fowlers only.

 Indicated items used with crank Fowler only.
 Indicated items 4 required when used with Knee Gatch only.
 Indicated items used with Knee Gatch only.

Indicated items used with pneumatic Fowler only.

 Indicated items used with manual Fowler only.

75
 946–225–37 Cribstyle SIderail & Bumper Ass’y, Left

Assembly part number

946–225–37
(reference only)
HEAD END

Item Part No. Part Name Qty.

A (page 77) Siderail Assembly 1
B 919–1–72 Bumper, Left 1
C 946–1–41 Cap 1
D 946–225–25 Latch Assembly, Left 1
F 946–1–70 Label 1
H 4–53 Button Hd. Cap Screw 4
J 16–11 Flexlock Nut 4
K 14–19 Washer 5
L 4–129 But. Hd. Cap Screw, Modified 1
M 16–11 Flex Nut 2
N 14–19 Washer 2
P 17–4 Acorn Nut 1
R 4–53 Button Hd. Cap Screw 2
S 4–76 But. Hd. Cap Screw, Modified 3
T 946–31–12 Pivot 1
W 4–94 But. Hd. Cap Screw, Modified 1
Y 16–16 Fiberlock Nut 2
Z 3–2 Hex Hd. Cap Screw 2
AA 4–94 Button Hd. Cap Screw 2
AB 11–3 Washer 2
AC 946–35–26 Modified Hex Nut 4
AD 4–130 Button Hd. Cap Screw 1

 Indicated items used with pneumatic and manual Fowlers only.

 Indicated items used with crank Fowler only.
 Indicated items 4 required when used with Knee Gatch only.
 Indicated items used with Knee Gatch only.

Indicated items used with pneumatic Fowler only.

 Indicated items used with manual Fowler only.

76
 Cribstyle Siderail Assembly

Assembly part number 946–225–39 (reference only)

Item Part No. Part Name Qty.

A 946–225–33 Rail Assembly 1
B 946–225–38 Upright Assembly 2
C 946–25–32 Support 2
D 946–225–30 Retainer 2
E 399–16–14 Support Tube Liner 4
F 50–10 Pan Hd. Mach. Screw 2

77
 Swingdown Siderail and Bumper Assembly, Right

Assembly part number 926–224–10, 926–225–10,

926–226–10, 926–228–10
(reference only)

HEAD END

926–224–10 1/3 SWINGDOWN SIDERAIL 926–225–10 3/4 SWINGDOWN SIDERAIL

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 926–24–222 1/3 Swingdown Ass’y 1 A 926–25–214 3/4 Swingdown Ass’y 1
B 926–24–29 Bumper, Right, Foot 1 B 926–24–29 Bumper, Right, Foot 1
C 926–24–28 Bumper, Right, Center 1 C 926–24–28 Bumper, Right, Center 1
D 926–24–27 Bumper, Right 1 D 926–24–27 Bumper, Right 1
E 926–24–6 Cap 1 E 926–24–6 Cap 1
F 926–24–5 Cap, Long 1 F 926–24–5 Cap, Long 1
H 926–24–4 Cap 1 H 926–24–4 Cap 1
J 926–26–42 Top Button Assembly 1 J 926–26–42 Top Button Assembly 1
K 926–26–13 Mounting Block 4 K 926–26–13 Mounting Block 4
L 926–26–19 Bottom Button 1 L 926–26–19 Bottom Button 1
M 926–26–20 Locking Bar 1 M 926–26–20 Locking Bar 1
N 926–26–38 Plug 3 N 926–26–38 Plug 3
P 9–25 Button Hd. Cap Screw 1 P 9–25 Button Hd. Cap Screw 1
R 11–53 Flat Washer 1 R 11–53 Flat Washer 1
S 4–53 Button Hd. Cap Screw 4 S 4–53 Button Hd. Cap Screw 4
T 16–11 Flexlock Nut 4 T 16–11 Flexlock Nut 4
W 14–19 Washer 4 W 14–19 Washer 4
Y 16–16 Fiberlock Nut 2 Y 16–16 Fiberlock Nut 2
Z 8–29 Hex Soc. Hd. Shld. Bolt 2 Z 8–29 Hex Soc. Hd. Shld. Bolt 2
AA 11–3 Flat Washer 1 AA 11–3 Flat Washer 1
AB 4–76 But. Hd. Cap Screw, Mod. 2 AB 4–76 But. Hd. Cap Screw, Mod. 2
AC 926–26–35 Label, Bottom Button 1 AC 926–26–35 Label, Bottom Button 1
AD 926–26–40 Modified Nut 2 AD 926–26–40 Modified Nut 2
AE 3–2 Hex Hd. Cap Screw 2 AE 3–2 Hex Hd. Cap Screw 2
AF 38–141 Spring 1 AF 38–141 Spring 1
AH 946–1–71 Label 1 AH 946–1–71 Label 1
AJ 926–26–39 Pin 1 AJ 926–26–39 Pin 1
AK 946–35–26 Modified Hex Nut 3 AK 946–35–26 Modified Hex Nut 3
AL 4–94 H. Soc. But. Hd. Cap Scr. 1 AL 4–94 H. Soc. But. Hd. Cap Scr. 1
AM 4–129 Button Hd. Cap Screw 1 AM 4–129 Button Hd. Cap Screw 1

Indicated items to be used with pneumatic Fowler only.

 Indicated items to be used with manual Fowler only.

78
 Swingdown Siderail and Bumper Assembly, Right

926–226–10 FULL SWINGDOWN SIDERAIL 926–228–10 X–HIGH SWINGDOWN SIDERAIL

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 926–26–212 Full Swingdown Ass’y 1 A 926–28–215 3/4 Swingdown Ass’y 1
B 926–24–29 Bumper, Right, Foot 1 B 926–24–29 Bumper, Right, Foot 1
C 926–24–28 Bumper, Right, Center 1 C 926–24–28 Bumper, Right, Center 1
D 926–24–27 Bumper, Right 1 D 926–24–27 Bumper, Right 1
E 926–24–6 Cap 1 E 926–24–6 Cap 1
F 926–24–5 Cap, Long 1 F 926–24–5 Cap, Long 1
H 926–24–4 Cap 1 H 926–24–4 Cap 1
J 926–26–42 Top Button Assembly 1 J 926–26–42 Top Button Assembly 1
K 926–26–13 Mounting Block 4 K 926–26–13 Mounting Block 4
L 926–26–19 Bottom Button 1 L 926–26–19 Bottom Button 1
M 926–26–20 Locking Bar 1 M 926–26–20 Locking Bar 1
N 926–26–38 Plug 3 N 926–26–38 Plug 3
P 9–25 Button Hd. Cap Screw 1 P 9–25 Button Hd. Cap Screw 1
R 11–53 Flat Washer 1 R 11–53 Flat Washer 1
S 4–53 Button Hd. Cap Screw 4 S 4–53 Button Hd. Cap Screw 4
T 16–11 Flexlock Nut 4 T 16–11 Flexlock Nut 4
W 14–19 Washer 4 W 14–19 Washer 4
Y 16–16 Fiberlock Nut 2 Y 16–16 Fiberlock Nut 2
Z 8–29 Hex Soc. Hd. Shld. Bolt 2 Z 8–29 Hex Soc. Hd. Shld. Bolt 2
AA 11–3 Flat Washer 1 AA 11–3 Flat Washer 1
AB 4–76 But. Hd. Cap Screw, Mod. 2 AB 4–76 But. Hd. Cap Screw, Mod. 2
AC 926–26–35 Label, Bottom Button 1 AC 926–26–35 Label, Bottom Button 1
AD 926–26–40 Modified Nut 2 AD 926–26–40 Modified Nut 2
AE 3–2 Hex Hd. Cap Screw 2 AE 3–2 Hex Hd. Cap Screw 2
AF 38–141 Spring 1 AF 38–141 Spring 1
AH 946–1–71 Label 1 AH 946–1–71 Label 1
AJ 926–26–39 Pin 1 AJ 926–26–39 Pin 1
AK 946–35–26 Modified Hex Nut 3 AK 946–35–26 Modified Hex Nut 3
AL 4–94 H. Soc. But. Hd. Cap Scr. 1 AL 4–94 H. Soc. But. Hd. Cap Scr. 1
AM 4–129 Button Hd. Cap Screw 1 AM 4–129 Button Hd. Cap Screw 1

Indicated items to be used with pneumatic Fowler only.

 Indicated items to be used with manual Fowler only.

79
 Swingdown Siderail and Bumper Assembly, Left

Assembly part number 926–224–11, 926–225–11, 926–226–11, 926–228–11 (reference only)

1 HEAD END

926–224–11 1/3 SWINGDOWN SIDERAIL 926–225–11 3/4 SWINGDOWN SIDERAIL

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 926–24–222 1/3 Swingdown Ass’y 1 A 926–25–214 3/4 Swingdown Ass’y 1
B 926–24–26 Bumper, Left, Foot 1 B 926–24–26 Bumper, Left, Foot 1
C 926–24–25 Bumper, Left, Center 1 C 926–24–25 Bumper, Left, Center 1
D 926–24–24 Bumper, Left 1 D 926–24–24 Bumper, Left 1
E 926–24–6 Cap 1 E 926–24–6 Cap 1
F 926–24–5 Cap, Long 1 F 926–24–5 Cap, Long 1
H 926–24–4 Cap 1 H 926–24–4 Cap 1
J 926–26–42 Top Button Assembly 1 J 926–26–42 Top Button Assembly 1
K 926–26–13 Mounting Block 4 K 926–26–13 Mounting Block 4
L 926–26–19 Bottom Button 1 L 926–26–19 Bottom Button 1
M 926–26–20 Locking Bar 1 M 926–26–20 Locking Bar 1
N 926–26–38 Plug 3 N 926–26–38 Plug 3
P 9–25 Button Hd. Cap Screw 1 P 9–25 Button Hd. Cap Screw 1
R 11–53 Flat Washer 1 R 11–53 Flat Washer 1
S 4–53 Button Hd. Cap Screw 4 S 4–53 Button Hd. Cap Screw 4
T 16–11 Flexlock Nut 4 T 16–11 Flexlock Nut 4
W 14–19 Washer 4 W 14–19 Washer 4
Y 3–2 Hex Hd. Cap Screw 2 Y 3–2 Hex Hd. Cap Screw 2
Z 8–29 Hex Soc. Hd. Shld. Bolt 2 Z 8–29 Hex Soc. Hd. Shld. Bolt 2
AA 11–3 Flat Washer 1 AA 11–3 Flat Washer 1
AB 4–76 But. Hd. Cap Screw, Mod. 2 AB 4–76 But. Hd. Cap Screw, Mod. 2
AC 926–26–35 Label, Bottom Button 1 AC 926–26–35 Label, Bottom Button 1
AD 926–26–40 Modified Nut 2 AD 926–26–40 Modified Nut 2
AE 16–16 Fiberlock Nut 2 AE 16–16 Fiberlock Nut 2
AF 38–141 Spring 1 AF 38–141 Spring 1
AH 946–1–71 Label 1 AH 946–1–71 Label 1
AJ 926–26–39 Pin 1 AJ 926–26–39 Pin 1
AK 946–35–26 Modified Hex Nut 3 AK 946–35–26 Modified Hex Nut 3
AL 4–94 H. Soc. But. Hd. Cap Scr. 1 AL 4–94 H. Soc. But. Hd. Cap Scr. 1
AM 4–129 Button Hd. Cap Screw 1 AM 4–129 Button Hd. Cap Screw 1

Indicated items to be used with pneumatic Fowler only.

 Indicated items to be used with manual Fowler only.

80
 Swingdown Siderail and Bumper Assembly, Left

926–226–11 FULL SWINGDOWN SIDERAIL 926–228–11 X–HIGH SWINGDOWN SIDERAIL

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 926–26–212 Full Swingdown Ass’y 1 A 926–28–215 3/4 Swingdown Ass’y 1
B 926–24–26 Bumper, Left, Foot 1 B 926–24–26 Bumper, Left, Foot 1
C 926–24–25 Bumper, Left, Center 1 C 926–24–25 Bumper, Left, Center 1
D 926–24–24 Bumper, Left 1 D 926–24–24 Bumper, Left 1
E 926–24–6 Cap 1 E 926–24–6 Cap 1
F 926–24–5 Cap, Long 1 F 926–24–5 Cap, Long 1
H 926–24–4 Cap 1 H 926–24–4 Cap 1
J 926–26–42 Top Button Assembly 1 J 926–26–42 Top Button Assembly 1
K 926–26–13 Mounting Block 4 K 926–26–13 Mounting Block 4
L 926–26–19 Bottom Button 1 L 926–26–19 Bottom Button 1
M 926–26–20 Locking Bar 1 M 926–26–20 Locking Bar 1
N 926–26–38 Plug 3 N 926–26–38 Plug 3
P 9–25 Button Hd. Cap Screw 1 P 9–25 Button Hd. Cap Screw 1
R 11–53 Flat Washer 1 R 11–53 Flat Washer 1
S 4–53 Button Hd. Cap Screw 4 S 4–53 Button Hd. Cap Screw 4
T 16–11 Flexlock Nut 4 T 16–11 Flexlock Nut 4
W 14–19 Washer 4 W 14–19 Washer 4
Y 3–2 Hex Hd. Cap Screw 2 Y 3–2 Hex Hd. Cap Screw 2
Z 8–29 Hex Soc. Hd. Shld. Bolt 2 Z 8–29 Hex Soc. Hd. Shld. Bolt 2
AA 11–3 Flat Washer 1 AA 11–3 Flat Washer 1
AB 4–76 But. Hd. Cap Screw, Mod. 2 AB 4–76 But. Hd. Cap Screw, Mod. 2
AC 926–26–35 Label, Bottom Button 1 AC 926–26–35 Label, Bottom Button 1
AD 926–26–40 Modified Nut 2 AD 926–26–40 Modified Nut 2
AE 16–16 Fiberlock Nut 2 AE 16–16 Fiberlock Nut 2
AF 38–141 Spring 1 AF 38–141 Spring 1
AH 946–1–71 Label 1 AH 946–1–71 Label 1
AJ 926–26–39 Pin 1 AJ 926–26–39 Pin 1
AK 946–35–26 Modified Hex Nut 3 AK 946–35–26 Modified Hex Nut 3
AL 4–94 H. Soc. But. Hd. Cap Scr. 1 AL 4–94 H. Soc. But. Hd. Cap Scr. 1
AM 4–129 Button Hd. Cap Screw 1 AM 4–129 Button Hd. Cap Screw 1

Indicated items to be used with pneumatic Fowler only.

 Indicated items to be used with manual Fowler only.

81
 390–25 Standard, Removable I.V. Pole Assembly

Item Part No. Part Name Qty.

A 24–23 Plastic Knob 1
C 390–3–53 Double I.V. Ass’y 1
D 393–3–43 Tube Assembly 1

82
 946–224–200 Folding I.V. Holder Assembly

Assembly part number 946–224–10 (reference only)

Item Part No. Part Name Qty.

A 946–224–1 Hanger 2
B 14–16 Washer 2
C 26–147 Groove Pin 1
D 946–224–2 Top Bracket, Mach’d 1
E 946–224–18 Label 2
F 946–224–33 Grip Assembly 1
H 946–224–4 Lock 1
J 946–224–5 Ring 1
K 946–224–3 Inner Tube 1
L 946–224–30 Hinge & Outer Tube Ass’y 1
M 946–224–19 Label 1
R 11–158 Washer 1
S 4–113 But. Hd. Cap Screw 1
T 25–86 Pop Rivet 2
W 946–224–22 Rest 2
Z 21–107 Set Screw 1

83
 946–40–100 Step Stool Kit Assembly

Item Part No. Part Name Qty.

A (page 85) Step Stool Assembly 1
B 946–40–106 Stop Assembly 1
C 946–40–86 Backup Plate Assembly 2
D 946–40–92 Support Tube Liner 4
E 946–40–107 Captive Plate Assembly 1
F 946–40–54 Pressure Relief Plate 2
J 38–131 Spring 2
K 12–21 Lock Washer 4
L 11–2 Washer 4
M 4–64 Soc. Hd. Cap Screw 4
N 3–2 Hex Hd. Cap Screw 4
P 26–63 Groove Pin 1
R 27–9 Hair Pin Cotter 1

84
 946–40–10 Step Stool Assembly

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 946–40–91 Step Assembly 1 L 17–13 Clip 4
B 946–40–88 Leg Assembly 1 M 37–30 End Cap 2
C 946–40–93 Leg Retractor 1 N 27–8 Hair Pin Cotter 2
D 946–40–99 Cover 1 P 946–40–110 Lock Clip 1
E 946–40–97 Tread 1 R 946–40–109 Label 1
F 8–18 Soc. Hd. Shoulder Bolt 2 S 946–40–111 Label 1
H 11–2 Washer 2 T 44–23 Tape A/R
J 16–16 Fiberlock Nut 2 W 14–4 Washer 1
K 11–3 Washer 2

85
 926–23–10 Fowler X–Ray Cassette Assembly

Additional assembly part number

946–23–10 (reference only)

926–23–10 946–23–10
Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 926–23–60 Tray 1 A 926–23–60 Tray 1
B 926–23–62 Post Housing 6 B 926–23–62 Post Housing 6
C 926–23–63 Actuating Rod 4 C 946–23–45 Actuating Rod 4
D 926–23–64 Post 4 D 926–23–64 Post 4
E 926–23–65 Bearing Housing 2 E 946–23–65 Bearing Housing 2
F 24–10 Knob 1 F 24–10 Knob 1
H 1010–23–28 Tray Angle 1 H 1010–23–28 Tray Angle 1
J 926–23–70 Block Assembly 1 J 926–23–70 Block Assembly 1
K 926–23–69 Washer 1 K 926–23–69 Washer 1
L 14–3 Washer 1 L 14–3 Washer 1
M 38–122 Compression Spring 2 M 38–122 Compression Spring 2
N 2–10 Rd. Hd. Mach. Screw 12 N 2–10 Rd. Hd. Mach. Screw 12
P 16–14 Fiberlock Nut 20 P 16–14 Fiberlock Nut 20
R 1–22 Flat Hd. Mach. Screw 8 R 1–22 Flat Hd. Mach. Screw 8
S 926–23–71 Bushing 1 S 926–23–71 Bushing 1
T 1–20 Flat Hd. Mach. Screw 2 T 1–20 Flat Hd. Mach. Screw 2
W 926–23–58 Specification Label 1 W 946–23–70 Specification Label 1
Y 926–23–59 Operation Label 1 Y 946–23–71 Operation Label 1

86
926–29–100 Oxygen Bottle Holder Assembly

Item Part No. Part Name Qty.

A 926–29–10 Holder Bar 1
B 926–29–19 Bracket 1
C 3–32 Hex Hd. Cap Screw 2
D 1–25 Flat Hd. Mach. Screw 2
E 15–5 Hex Nut 4
F 11–63 Washer 4

87
 926–39 Optional Defibrillator Tray Assembly

Assembly part number

926–39–10 (reference only)

Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 946–39–4 Tray 1 K 926–1–82 Label 1
B 926–39–16 Crosstube 3 L 390–57–12 Long Strap 1
C 25–55 Rivet 4 M 390–57–13 Short Strap 1
D 926–39–9 Cover 1 N 946–1–283 Label 1
E 18–6 Umbrella Nut 6 P 926–39–15 Holder 2
F 29–8 Dual Lock 6 R 2–44 Screw 2
H 29–10 Dual Lock 6 S 2–105 Rd. Hd. Mach. Screw 6
J 946–39–3 Support Tube 2

88
 926–55–100 Paper Roll Dispenser Assembly

Item Part No. Part Name Qty.

A 926–55–12 Dispenser Assembly 1
B 16–11 Hex Castle Nut 4
C 300–20 Wax Paper Roll (not shown) A/R

926–40–100 Foot Board/Chartholder Assembly

A

Item Part No. Part Name Qty.

A 946–28–100 Chart Holder 1
B 946–29–100 Foot Board 1

89
 926–27–100 & 946–27–100 Push Bar Assembly

Assembly part number 926–27–10 & 946–27–44

(reference only)

926–27–10 946–27–44
Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A 926–27–19 Bar Assembly 1 A 946–27–43 Bar Assembly 1
B 946–27–31 Latch Assembly 1 B 946–27–31 Latch Assembly 1
C 946–27–32 Bracket Assembly 1 C 946–27–32 Bracket Assembly 1
D 946–27–37 Bracket, Right 1 D 946–27–37 Bracket, Right 1
E 8–18 Shoulder Bolt 2 E 8–18 Shoulder Bolt 2
H 16–16 Fiberlock Nut 1 H 16–16 Fiberlock Nut 1
J 946–1–71 Label, Operation 1 J 946–1–71 Label, Operation 1
K 926–1–72 Label, Specification 1 K 946–1–72 Label, Specification 1
M 21–109 Set Screw 1 M 21–109 Set Screw 1
N 946–27–131 Latch Replacement Kit A/R N 946–27–131 Latch Replacement Kit A/R

90
390–11 Armboard and Support Tube Assembly

Item Part No. Part Name Qty.

A (page 92) Swivel Tube Assembly 1
B (page 93) Armboard Assembly 1
C 390–11–6 Extension Tube 1
D 24–53 Fluted Knob 1

91
390–11–50 Armboard Swivel Tube Assembly

Item Part No. Part Name Qty.

A 390–11–8 Swivel Tube 2
B 390–11–20 Spacer 2
C 350–2–24 Collar 2
D 24–11 Plastic Knob, Large 2
E 16–5 Hex Nut 2
F 3–5 Hex Hd. Cap Screw 2
H 24–10 Plastic Knob, Small 2
J 390–11–14 Storage Label 4

92
 390–11–51 Armboard Assembly

Item Part No. Part Name Qty.

A 390–11–4 Arm Holder Assembly 1
B 2–16 Rd. Hd. Mach. Screw 2
C 390–11–12 Foam Pad 1
D 390–11–13 Arm Board Cover 1
E 390–11–1 Arm Support 1
F 390–11–10 Arm Band Assembly 2

93
 Mattresses and Siderail Pads

Mattress, 2” Thick x 24” Wide, Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . part # 1059–224–140

Mattress, 3” Thick x 24” Wide, Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . part # 1059–324–140
Mattress, 4” Thick x 24” Wide, Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . part # 1059–424–140
Mattress, 2” Thick x 29” Wide, Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . part # 1059–229–140
Mattress, 3” Thick x 29” Wide, Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . part # 1059–329–140
Mattress, 4” Thick x 29” Wide, Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . part # 1059–429–140

94
 Mattresses and Siderail Pads

Folddown Siderail Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . part # 946–96–10

Folddown Siderail Pad (set of two) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . part # 946–96

Swing Siderail Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . part # 946–97–10

Swing Siderail Pad (set of two) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . part # 946–97

95
 Warranty

Limited Warranty:
Stryker Medical Division, a division of Stryker Corporation, warrants to the original purchaser that its products
should be free from defects in material and workmanship for a period of one (1) year after date of delivery.
Stryker’s obligation under this warranty is expressly limited to supplying replacement parts and labor for, or
replacing, at its option, any product which is, in the sole discretion of Stryker, found to be defective. Stryker
warrants to the original purchaser that the frame and welds on its beds will be free from structural defects
for as long as the original purchaser owns the bed. If requested by Stryker, products or parts for which a
warranty claim is made shall be returned prepaid to Stryker’s factory. Any improper use or any alteration or
repair by others in such manner as in Stryker’s judgement affects the product materially and adversely shall
void this warranty. No employee or representative of Stryker is authorized to change this warranty in any way.
This statement constitutes Stryker’s entire warranty with respect to the aforesaid equipment. STRYKER
MAKES NO OTHER WARRANTY OR REPRESENTATION, EITHER EXPRESSED OR IMPLIED, EXCEPT
AS SET FORTH HEREIN. THERE IS NO WARRANTY OF MERCHANTABILITY AND THERE ARE NO
WARRANTIES OF FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT SHALL STRYKER BE
LIABLE HEREUNDER FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OR IN ANY
MANNER RELATED TO SALES OR USE OF ANY SUCH EQUIPMENT.

To Obtain Parts and Service:

Stryker products are supported by a nationwide network of dedicated Stryker Field Service Representatives.
These representatives are factory trained, available locally, and carry a substantial spare parts inventory to
minimize repair time. Simply call your local representative, or call Stryker Customer Service at (800)
327–0770.

Supplemental Warranty Coverage:

Stryker has developed a comprehensive program of extended warranty options designed to keep your equip-
ment operating at peak performance at the same time it eliminates unexpected costs. We recommend that
these programs be activated before the expiration of the new product warranty to eliminate the potential of
additional equipment upgrade charges. Stryker offers the following Supplemental Warranties:

Extended (Parts and Labor)

S All replacement parts (excluding mattresses and consumable items)
S Labor and travel for all scheduled and unscheduled calls
S Annual Preventive Maintenance Inspections and repairs
S JCAHO paperwork for preventive maintenance
S Priority Emergency Service

Standard (Labor Only):

S Labor and travel for all scheduled and unscheduled calls
S Annual Preventive Maintenance Inspections and repairs
S JCAHO paperwork for preventive maintenance
S Priority Emergency Service

Basic (Parts Only):

S All replacement parts (excluding mattresses and consumable items)
S Priority Emergency Service

Please call your local representative, or call (800) 327–0770 for further information

96
 Warranty

Return Authorization:
Merchandise cannot be returned without approval from the Stryker Customer Service Department. An autho-
rization number will be provided which must be printed on the returned merchandise. Stryker reserves the
right to charge shipping and restocking fees on returned items.
SPECIAL, MODIFIED, OR DISCONTINUED ITEMS NOT SUBJECT TO RETURN.
Damaged Merchandise:
ICC Regulations require that claims for damaged merchandise must be made with the carrier within fifteen
(15) days of receipt of merchandise. DO NOT ACCEPT DAMAGED SHIPMENTS UNLESS SUCH DAMAGE
IS NOTED ON THE DELIVERY RECEIPT AT THE TIME OF RECEIPT. Upon prompt notification, Stryker
will file a freight claim with the appropriate carrier for damages incurred. Claim will be limited in amount to
the actual replacement cost. In the event that this information is not received by Stryker within the fifteen
(15) day period following the delivery of the merchandise, or the damage was not noted on the delivery receipt
at the time of receipt, the customer will be responsible for payment of the original invoice in full.
Claims for any short shipment must be made within thirty (30) days of invoice.

97
6300 Sprinkle Road, Kalamazoo, MI 49001–9799 (800) 327–0770

DH 2/00 946–1–282 REV G