STAINLESS STEEL VALVES

TABLE OF CONTENTS PRODUCT CATALOG

AFFILIATIONS PAGE 1

BUTTERFLY VALVES PAGE 2-9

Specifications...................................................................................................................... 3
Pneumatically Operated technical application data and dimensions..................................4
Manual information and dimensional chart......................................................................... 5
Manual parts drawing and parts list.................................................................................... 6
Electronically-controlled Pneumatically operated information & drawing........................... 7
Electronic Actuator part list & dimensional chart................................................................ 8
Pneumatically operated and electronically-controlled part number information................. 9

CHECK VALVES PAGE 10-17

Specifications...................................................................................................................... 11
Ball Check information, parts breakdown & part number sequence for ordering...............12
Spring Check information, parts breakdown & part number sequence for ordering...........13
Air Blow Check illustration, parts list and connections....................................................... 14
Air Blow Check abilities and dimension table..................................................................... 15
Air Blow Check Disposable Air Filter Media Capacity Test.................................................16
Air Blow Check on top of Ball Check.................................................................................. 17

BALL VALVES PAGE 18-21

2 - Way Specifications........................................................................................................19
2 - Way Clamp and Weld part numbers, illustrations and dimensions...............................20
2 - Way Clamp and Weld part list, pressure temperature rating and torques....................21
3 - Way Specifications........................................................................................................22
3 - Way Clamp and Weld part numbers, illustrations and dimensions..............................23
3 - Way Clamp and Weld part list, pressure temperature rating and torques....................24
2 & 3 Way Actuated Ball Valve specifications....................................................................25
2 & 3 Way dimensions with Actuators ...............................................................................26
3 - Way Ball Valve Configuration options (standard Actuator)............................................27
3 - Way Ball Valve Configuration options (reverse-acting Actuator)...................................28
2 & 3 Way Actuated Ball Valve part numbering .................................................................29

PVA VALVES PAGE 30-41

Specifications...................................................................................................................... 31
Illustrations, part numbers, and dimensions....................................................................... 32
Shut Off illustration & part number information...................................................................33
Shut Off replacement parts................................................................................................. 34
Divert illustration & part number information.......................................................................35
Divert replacement parts.....................................................................................................36
Air Actuator control head and Actuator illustrations............................................................ 37
Air Actuator control top replacement parts and Air Actuator replacement parts.................38
Tank-Bottom illustration and parts.......................................................................................39
Manual Actuator, Actuator, Actuator with control head illustrations & parts........................40
Pressure drop and capacity diagrams................................................................................ 41

COMPRESSION VALVE PAGE 42

 STAINLESS STEEL VALVES
AFFILIATIONS PRODUCT CATALOG

VNE AFFILIATIONS...
VNE is an active member of numerous industry-related organizations and associations.

3-A®
VNE is a member of 3-A®, a voluntary organization committed to safeguarding public health and dairy
product quality through a unique industry-regulated program of sanitary standards for equipment used in
processing dairy foods.

WCMA
Wisconsin Cheese Makers Association
VNE is a member of WCMA, a nonprofit trade association dedicated to improving the business climate for
dairy companies, primarily cheese and butter manufacturing and marketing companies. There actions
also extend to the companies that supply goods and services to the dairy industry.

FISA
Food Industry Suppliers Association
VNE is a member of FISA, a national association of independent distributors and major manufacturers of
sanitary supplies used in the food, dairy, beverage, pharmaceutical and personal care industries.

IAFIS
The International Association of Food Industry Suppliers
VNE is a member of IAFIS, a nonprofit trade association of manufactures and suppliers serving the global
food industry, VNE adheres to the international standards promoted in its activities.

ISPE
The International Society for Pharmaceutical Engineering
VNE is a member of ISPE, a not-for-profit volunteer Society of technical professionals, who apply their
practical knowledge in the regulated healthcare manufacturing industries. ISPE is committed to advance-
ment of the education and technical efficiency of its members through forums for the exchange of ideas
and practical experience.

ASME
American Society of Mechanical Engineers
VNE is a member of ASME International, a nonprofit educational and technical organization serving world-
wide membership of 125,000. Established to promote technical competency through quality programs
and activities in the mechanical engineering fields.

1
VALVES
Butterfly Valves

VNE 2
 STAINLESS STEEL VALVES
SPECIFICATIONS PRODUCT CATALOG

BUTTERFLY VALVES
“B” SERIES BUTTERFLY VALVES

BUTTERFLY VALVES....

Butterfly Valves are available in Manual, Air Actuated, or

Air Actuated with two Micro switches and a Solenoid
Valve. Clamp or Weld ends are standard. Other con-
nections are available upon request.

Available seat materials include Silicone, Viton®, and

EPDM. Sizes range from 1˝ through 4˝. All product
contact surfaces are available in either T304 or T316
stainless steel.

BUTTERFLY VALVES SPECIFICATIONS.... ORDERING SPECIFICATIONS....

Size Range: 1˝ through 4˝ sizes available Specify: • Quantity

• Product description or Part No.

Materials: T304
• Size
T316
• Material Type
Info: All stainless handle with eight positions
is standard. Each position is set in 45°
increments.

Silicone seats are standard - other

seats available are EPDM and Viton®.

VNE CORPORATION
P.O. Box 1698 • 1149 Barberry Drive • Janesville, WI 53547
TEL: 608-756-4930 • FAX: 608-756-3643 • 1-800-356-1111 • Web site: vnestainless.com
3
 STAINLESS STEEL VALVES
BUTTERFLY VALVES PRODUCT CATALOG

PNEUMATICALLY OPERATED
PNEUMATICALLY OPERATED BUTTERFLY VALVE INFORMATION
• Air to open, spring to close is standard.

• Unique design provides higher torque at final closing of disc.

• One actuator fits 1˝ through 4˝ valves.

• Air pressure required 73-108 psi to operate actuator.

• No spare parts required.

• Maintenance free actuator.

TECHNICAL APPLICATION DATA

• Maximum product pressure 10 Bar / 145 PSI

• Maximum short time sterilization temperature:

• 130° C / 266°F EPDM

• 130° C / 266°F Silicon D

• 140° C / 284°F Viton

• Minimum product temperature 14°F

PNEUMATICALLY OPERATED BUTTERFLY VALVE

DIMENSIONAL CHART
C

Size C C D E
All Steel Internal Polymer Internals
1˝ 7 57/64˝ 8 23/32 3/4˝ 2 61/64˝
1 1/2˝ 8 3/64˝ 8 57/64 3/4˝ 3 3/16˝
2˝ 8 11/32˝ 9 11/64 3/4˝ 3 21/32˝
2 1/2˝ 8 37/64˝ 9 13/32 3/4˝ 4 3/32˝
3˝ 8 53/64˝ 9 21/32 3/4˝ 4 17/32˝
4˝ 9 7/16˝ 10 17/64 3/4˝ 5 43/64˝

4
 STAINLESS STEEL VALVES
BUTTERFLY VALVES PRODUCT CATALOG

MANUAL BUTTERFLY VALVE

MANUAL BUTTERFLY VALVE INFORMATION
Note: If other Elastomer is required add suffix as follows: (E) EPDM (V) Viton®

PART NUMBER SEQUENCE WHEN ORDERING

COMPLETE VALVES

Clamp Connections
EGCCB-(Valve Size)
Silicone Seat

Weld Ends
EGSSB-(Valve Size)
SS Silicone Seat

CC
Note: To order above items in T316 add a 6 before size.
IE: EGSSB-6-SIZE

MANUAL BUTTERFLY VALVE

DIMENSIONAL CHART

Number
Size CC SS A B of Bolts

1˝ 2 13/16˝ 1 13/16˝ 4 19/32˝ 7˝ 4

1 1/2˝ 2 13/16˝ 1 13/16˝ 4 23/32˝ 7˝ 4
2˝ 2 13/16˝ 1 13/16˝ 4 15/16˝ 7˝ 6
2 1/2˝ 3 3/8˝ 2 3/8˝ 5 5/32˝ 7˝ 6
3˝ 3 3/4˝ 2 3/4˝ 5 3/8˝ 7˝ 6
4˝ 4˝ 2 3/4˝ 5 15/16˝ 7˝ 8

5
 STAINLESS STEEL VALVES
BUTTERFLY VALVES PRODUCT CATALOG

MANUAL BUTTERFLY VALVE

PARTS DRAWING & INFORMATION

11
11A

10

22

7 thru 9

20
3 19
1
4

MANUAL BUTTERFLY VALVE

PARTS LIST
Item Part Number Description
1 *BVP-B-96-1-(size) Body Half - Weld End
1A *BVP-B-96-1A-(size) Body Half - Bevel Seat Thread (not shown)
2 *BVP-B-96-2-(size) Body Half - Clamp (not shown)
3 *BVP-B-96-3-(size)-H Disc
4 BVP-B-96-4-(size)-H Teflon Bushing (2 required)
7 BVP-B-96-7-(size)-H Seat - Silicone (Standard)
8 BVP-B-96-8-(size)-H Seat - EPDM
9 BVP-B-96-9-(size)-H Seat - Viton®
10 BVP-B-96-10 All Stainless Handle
11 BVP-B-96-11 Thumbscrew
11A BVP-B-00-11A Allen Head Handle Seat Screw
15A BVP-B-96-15A Mounting Bracket for Actuator on Clamp Type Valve (not shown)
15B BVP-B-96-15B Mounting Bracket for Actuator on Flange Type Valve (not shown)
19 BVP-B-96-19 Bolts for Body Half
19L BVP-B-96-19L Long Bolts for Mounting Actuator Bracket (not shown)
20 BVP-B-96-20 Nuts for Body Half
20A BVP-B-96-20A Wing Nuts for Body Half (not shown)
20AS BVP-B-96-20AS Wing Nuts for 3" Body Half Only (not shown)
22 BVP-B-96-22 Handle Seat
*To order above items in T316 stainless steel add a 6 before size. IE: BVP-B-96-1-6-SIZE

6
 STAINLESS STEEL VALVES
BUTTERFLY VALVES PRODUCT CATALOG

ELECTRONIC BUTTERFLY VALVE

ELECTRONICALLY-CONTROLLED PNEUMATICALLY OPERATED BUTTERFLY VALVE
• Electro-magnetic air solenoid valve provides 14
quick positive response to control signal

• Two limit switches provide confirmation of valve

position to central control panel
6

• Available in 110V or 24V 24

21 25
• All controls are protected under the splash- 11 15-1
3&4 22 110V
proof cover on top of the cylinder
15-2
5 24V
• Two Indicating Lights on outside of valve for 13 15
visual inspection

8
19
18

16

2
12
2A

7 26-G 26-R 1
2L

7
 STAINLESS STEEL VALVES
BUTTERFLY VALVES PRODUCT CATALOG

ELECTRONIC ACTUATOR
PARTS LIST
Item Part Number Description
1 BVP-ACTUC-1 Stainless Plugs (2)
2 BVP-ACTUC-2 Elec. Adapter (Complete)
2A BVP-ACTUC-2A Elec. Adapter (Actuator Side)
2L BVP-ACTUC-2L Elec. Adapter (Line Side)
3+4 BVP-ACTUC-3+4 Micro Switches with Harness and Terminal Strip (Complete)
5 BVP-ACTUC-5 Micro Switch Activator
6 BVP-ACTUC-6 Air Vent Tube Assembly
7 BVP-ACTUC-7 Plastic Molded Base
8 BVP-ACTUC-8 Adj. Screws for Micro Switch (2 Required)
11 BVP-ACTUC-11 Washer for Block
12 BVP-ACTUC-12 Base Screws (3 Required)
13 BVP-ACTUC-13 Switch Block
14 BVP-ACTUC-14 Cover
15 BVP-ACTUC-15 Solenoid Valve
15-1 BVP-ACTUC-15-1 110V Coil Only
15-2 BVP-ACTUC-15-2 24V Coil Only
16 BVP-ACTUC-16 Cable Adapter Fitting
18 BVP-ACTUC-18 Cover O-Ring
19 BVP-ACTUC-19 Air Inlet Fitting
21 BVP-ACTUC-21 Screw for Block
22 BVP-ACTUC-22 Screws for Solenoid (2 Required)
24 BVP-ACTUC-24 Nut and Washer for Coil-Solenoid
25 BVP-ACTUC-25 Plug Connection to Solenoid
26-G BVP-ACTUC-26G Indicating Light (Green)
26-R BVP-ACTUC-26R Indicating Light (Red)
23 BVP-B-96-23 Air Inlet Fitting (not shown)
24 BVP-B-96-24 Coupler for Clamp Type Valve, Visual Stem Indicator (not shown)
25 BVP-B-96-25 Coupler for Flange Type Valve, Visual Stem Indicator (not shown)
25A BVP-B-96-25A Rivet for Coupler (not shown)

ELECTRONICALLY-CONTROLLED PNEUMATICALLY OPERATED VALVE

DIMENSIONAL CHART

Size E H
1˝ 2 61/64˝ 11 57/64˝
1 1/2˝ 3 3/16˝ 12 3/64˝
2˝ 3 21/32˝ 12 11/32˝
2 1/2˝ 4 3/32˝ 12 37/64˝
3˝ 4 17/32˝ 12 53/64˝
4˝ 5 43/64˝ 13 7/16˝

8
 STAINLESS STEEL VALVES
BUTTERFLY VALVES PRODUCT CATALOG

PNEUMATICALLY OPERATED AND/OR

ELECTRONICALLY-CONTROLLED BUTTERFLY VALVE
PART NUMBER SEQUENCE
WHEN ORDERING COMPLETE VALVES

ASPCCB (Size) - Clamp End T304 Butterfly Valve with Electronically Controlled all Stainless Air to Spring
Actuator & Silicone Seat.

ASPSSB (Size) - Weld End T304 Butterfly Valve with Electronically Controlled all Stainless Air to Spring
Actuator & Silicone Seat

ASPCCB-NE (Size) - Clamp End T304 Butterfly Valve with all Stainless Air to Spring Actuator & Silicone Seat

ASPSSB-NE (Size) - Weld End T304 Butterfly Valve with all Stainless Air to Spring Actuator & Silicone Seat

ASPCCB-6 (Size) - Clamp End T316L Butterfly Valve with Electronically Controlled all Stainless Air to Spring
Actuator & Silicone Seat.

ASPSSB-6 (Size) - Weld End T316L Butterfly Valve with Electronically Controlled all Stainless Air to Spring
Actuator & Silicone Seat

ASPCCB-6NE (Size) - Clamp End T316L Butterfly Valve with all Stainless Air to Spring Actuator & Silicone Seat

ASPSSB-6NE (Size) - Weld End T316L Butterfly Valve with all Stainless Air to Spring Actuator & Silicone Seat

APPCCB-NE (Size) - Clamp End T304 Butterfly Valve with Stainless & Polymer Internal Components Air to
Spring Actuator & Silicone Seat

APPSSB-NE (Size) - Weld End T304 Butterfly Valve with Stainless & Polymer Internal Components Air to
Spring Actuator & Silicone Seat

APPCCB-6NE (Size) - Clamp End T316L Butterfly Valve with Stainless & Polymer Internal Components Air to
Spring Actuator & Silicone Seat

APPSSB-6NE (Size) - Weld End T316L Butterfly Valve with Stainless & Polymer Internal Components Air to
Spring Actuator & Silicone Seat

Note: If other Elastomer is required add suffix as follows: (E) EPDM

(V) Viton®

ACT-AS-NE-B - All Stainless Air to Spring T304 Actuator

ACT-AP-NE-B - Stainless & Polymer Internal Components Air to Spring T304 Actuator

ACT-AS-(110V/ 24V) - All Stainless Electronically Controlled Air to Spring T304 Actuator. Designate 110V or
24V

9
VALVES
Check Valves

VNE 10
 STAINLESS STEEL VALVES
CHECK VALVES PRODUCT CATALOG

SPRING CHECK VALVE

INFORMATION
• One piece stem with O-Ring construction (easy seal • Full Polished ID and OD
replacement and positive shut-off) • All metal contact surfaces of T316L Stainless Steel
• Viton O-Ring standard (other available upon request) • Sizes range from .5¨ through 4.0¨
• Clamp connections standard • Meets 3A sanitary standards
(other connections available upon request)
PARTS BREAKDOWN
1. Lower body - (Body)
2. Stem - (2.0 thru 4.0 have guide fingers)
3. Spring - (3-5 psi) (Available upon request)
3L Spring Light - (1-3 psi) Standard 8
4. O -Ring - standard Viton
7 6
5. Stem guide
6. Upper body - (Bonnet) O.A.L. 5
7. Body Clamp .5 and¨ .75¨ = 13MHHM1.5 - H
4
Body Clamp 1.0¨ and 1.5¨ = 13MHHM2.5 - H 3
Body Clamp 2.0¨ = 13MHHM3.0 - H
2
Body Clamp 2.5¨ = 13MHHM4.0 - H
Body Clamp 3.0¨ = 13MHHM5.0 - H 1
Body Clamp 4.0¨ = 13MHP6.0
8. Clamp Gasket .5 and .75 = EG40V 1.5
Clamp Gasket 1.0 and 1.5 = EG40V 2.5
Clamp Gasket 2.0 = EG40V 3.0
Clamp Gasket 2.5 = EG40V 4.0
Clamp Gasket 3.0 = EG40V 5.0
Clamp Gasket 4.0 = EG40V 6.0
PART NUMBER SEQUENCE WHEN ORDERING COMPLETE VALVE:
45 (spring check) C (clamp) 6 (T316L) 2.0 (size) V (seat material) Example: 45C - 6 2.0 - V
When requesting O-Ring changes add the following to the end of part number
Note: V=Viton E=EDPM S=Silicone B=Buna,
PART NUMBER SEQUENCE WHEN ORDERING REPLACEMENT PARTS:
45-SCV (item number) - (valve size)
Example: 45-SCV1C-1.5 = Lower body clamp for 1.5 valve

Overall Length
Valve
Size Standard Clamp Weld and Other Approx WT LBS
.5¨ 3 1/2 A.O.R 2.2
.75¨ 3 1/2 A.O.R. 2.2
1.0¨ 4 1/8 A.O.R 3.5
1.5¨ 4 9/16 A.O.R. 3.5
2.0¨ 5 1/16 A.O.R. 5.4
2.5¨ 5 3/8 A.O.R. 6
3.0¨ 6 1/8 A.O.R. 6.25
4.0¨ 8 1/8 A.O.R. 16
13
 STAINLESS STEEL VALVES
CHECK VALVES PRODUCT CATALOG

BALL CHECK VALVE

INFORMATION
• Precision machined seat to ensure positive shut-off • Polished ID and OD
• Two-piece construction for easier alignment during • All metal contact surfaces of T316L stainless steel
installation • Sizes range from 1 1/2˝ through 3˝
• Other connections available upon request • Meets 3A sanitary standards
• Buna-N and Viton® elastomers • Buna Ball & Gaskets Standard

PARTS BREAKDOWN
1. Seat body - (Clamp)
7 2
1W. Seat body - (Weld)
2. Cap
3 5 6 4 8
3B. Ball-(Buna-N)
3V. Ball-(Viton®)
1
4. Angle body 4
4W. Angle body-(Weld)
5. Body clamp
6B. Body gasket-(Buna-N)
6V. Body gasket-(Viton®)
7. Cap clamp
8B. Cap gasket-(Buna-N)
8V. Cap gasket-(Viton®) E
EG

PART NUMBER SEQUENCE WHEN ORDERING COMPLETE VALVE:

Clamp connections EG45BY-6 (valve size)
Weld ends E45BYWW-6 (valve size)
Note: If Viton® elastomers are required, add “V” after size

PART NUMBER SEQUENCE WHEN ORDERING REPLACEMENT PARTS:

BCV (item number) - (valve size)
Example: BCV3B-1.5 = Buna-N ball for 1.5 valve

Nominal Size Actual Size Overall Length

Valve 1&4 2 5&7 6&8 3 EG E Approx.
Size Body Cap Clamp Gasket Ball Clamp Weld Wt. Lbs.
1.5 1.5˝ 2.5˝ 2.5˝ 2.5˝ 2 1/8˝ 10 9 4.80
2.0˝ 2.0˝ 3.0˝ 3.0˝ 3.0˝ 2 5/8˝ 11 10 6.30
2.5˝ 2.5˝ 4.0˝ 4.0˝ 4.0˝ 3 5/16˝ 14 1/8 13 1/8 10.20
3.0˝ 3.0˝ 4.5˝ 4.5˝ 4.5˝ 4 1/4˝ 13 5/8 12 5/8 11.50
*3.0¨ 3.0¨ 4.0¨ 4.0¨ 4.0¨ 3 5/16¨ 13 5/8¨ 12 5/8¨ 11.50

* Redesigned February 2003. Valves purchased after 2/03 use *3.0 dimensions.

12
 STAINLESS STEEL VALVES
CHECK VALVES PRODUCT CATALOG

SPRING CHECK VALVE

INFORMATION
• One piece stem with O-Ring construction (easy seal • Full Polished ID and OD
replacement and positive shut-off) • All metal contact surfaces of T316L Stainless Steel
• Viton O-Ring standard (other available upon request) • Sizes range from .5¨ through 4.0¨
• Clamp connections standard • Meets 3A sanitary standards
(other connections available upon request)
PARTS BREAKDOWN
1. Lower body - (Body)
2. Stem - (2.0 thru 4.0 have guide fingers)
3. Spring - (3-5 psi) (Available upon request)
3L Spring Light - (1-3 psi) Standard 8
4. O -Ring - standard Viton
7 6
5. Stem guide
6. Upper body - (Bonnet) O.A.L. 5
7. Body Clamp .5 and¨ .75¨ = 13MHHM1.5 - H
4
Body Clamp 1.0¨ and 1.5¨ = 13MHHM2.5 - H 3
Body Clamp 2.0¨ = 13MHHM3.0 - H
2
Body Clamp 2.5¨ = 13MHHM4.0 - H
Body Clamp 3.0¨ = 13MHHM5.0 - H 1
Body Clamp 4.0¨ = 13MHHM6.0 - H
8. Clamp Gasket .5 and .75 = EG40V 1.5
Clamp Gasket 1.0 and 1.5 = EG40V 2.5
Clamp Gasket 2.0 = EG40V 3.0
Clamp Gasket 2.5 = EG40V 4.0
Clamp Gasket 3.0 = EG40V 5.0
Clamp Gasket 4.0 = EG40V 6.0
PART NUMBER SEQUENCE WHEN ORDERING COMPLETE VALVE:
45 (spring check) C (clamp) 6 (T316L) 2.0 (size) V (seat material) Example: 45C - 6 2.0 - V
When requesting O-Ring changes add the following to the end of part number
Note: V=Viton E=EDPM S=Silicone B=Buna,
PART NUMBER SEQUENCE WHEN ORDERING REPLACEMENT PARTS:
45-SCV (item number) - (valve size)
Example: 45-SCV1C-1.5 = Lower body clamp for 1.5 valve

Overall Length
Valve
Size Standard Clamp Weld and Other Approx WT LBS
.5¨ 3 1/2 A.O.R 2.2
.75¨ 3 1/2 A.O.R. 2.2
1.0¨ 4 1/8 A.O.R 3.5
1.5¨ 4 9/16 A.O.R. 3.5
2.0¨ 5 1/16 A.O.R. 5.4
2.5¨ 5 3/8 A.O.R. 6
3.0¨ 6 1/8 A.O.R. 6.25
4.0¨ 8 1/8 A.O.R. 16
13
 STAINLESS STEEL VALVES
CHECK VALVES PRODUCT CATALOG

AIR BLOW CHECK VALVE

ILLUSTRATION
Air Blow Check Valves are made of T316L Stainless Steel Note: EDPM Stem Standard
and are offered with EPDM or Viton® Elastomers.

6 AIR BLOW CHECK VALVE

5 9 CONNECTIONS
7

8
“A” ADAPTER “B” ADAPTER

4 3 “C” ADAPTER
2

PART NUMBER SEQUENCE WHEN ORDERING COMPLETE VALVE

EG62A-6L SIZE = “A” Connection
EG62B-6L SIZE = “B” Connection (shown)
EG62C-6L SIZE = “C” Connection
For Viton® Add “V” to end of part number

PARTS LIST
1. ADAPTER 5. SPRING RETAINER
ABV1A = Air Line Quick Coupler ABV5 = All Sizes
ABV1B = Rubber Hose Barb 1˝
ABV1C = Thermometer Cap 6. SPRING
1. EG23B-6L 1.5 x .375 FNPT ABV6 = All Sizes
2. EG23B-6L 1.0 x .500 FNPT
7. STEM GUIDE
2. CLAMP ABV7 = All Sizes
13MHHM 1.5 = 1 1/2˝ All Sizes
8. STEM
3. PERFORATED DISC ABV8 = EPDM Stem
ABV3 1.5 = 1 1/2˝ EPDM ABV8-V = Viton® Stem
ABV3-V 1.5 = 1 1/2˝ Viton®
9. FILTER DISC
4. VALVE BODY ABV9
ABV4 1.5 = 1 1/2˝ Clamp Body 50 / PKG.
ABV4 2.0 = 2˝ Clamp Body
ABV4 2.5 = 2 1/2˝ Clamp Body
ABV4 3.0 = 3˝ Clamp Body
ABV4 4.0 = 4˝ Clamp Body

Viton is registered by DuPont Dow Elastomers 14

 STAINLESS STEEL VALVES
CHECK VALVES PRODUCT CATALOG

AIR BLOW CHECK VALVE

AIR BLOW CHECK VALVE ABILITIES
• VNE Air Blow Check Valves are designed to evacuate lines of product or CIP solutions.

• Fail Safe Operation - backflow of product or CIP solution prevented by simple air to open, spring to
close operation.

• Easy Assembly / Disassembly - Clamp connections permit quick disassembly and assembly for replacing Filter
Media, cleaning or inspection.

• Made of T316L stainless steel offered with EPDM or Viton® Stem and Gasket.

• Meets 3A standards - for applications requiring a final filtering of air prior to entering tank or pipelines.

• Note:
The Air Blow Check Valve must be used with a Filter Disc. These Filter Discs are available in
packages of 50.

* For use on Ball Check Valves: 1 1/2˝ Ball Check Valve uses 2 1/2˝ Air Blow Valve
2˝ Ball Check Valve uses 3˝ Air Blow Valve
2 1/2˝ Ball Check Valve uses 4˝ Air Blow Valve
3˝ Ball Check Valve uses 4˝ Air Blow Valve

AIR BLOW CHECK VALVE DIMENSION TABLE

Part Number Description 1 1/2˝ 2˝ 2 1/2˝ 3˝ 4˝

EG62A-6L “A” Adapter Length 2.500 2.500 2.500 2.500 2.500

EG62A-6L “A” Adapter O.D. 1.984 2.516 3.047 3.579 4.682

EG62B-6L “B” Adapter Length 4.875 4.875 4.875 4.875 4.875

EG62B-6L “B” Adapter O.D. 1.984 2.516 3.047 3.579 4.682

EG62C-6L “C” Adapter Length 2.000 2.000 2.000 2.000 2.000

EG62C-6L “C” Adapter O.D. 1.984 2.516 3.047 3.579 4.682

Viton® is registered by DuPont Dow Elastomers.

15
 STAINLESS STEEL VALVES
CHECK VALVES PRODUCT CATALOG

AIR BLOW CHECK VALVE

DISPOSABLE AIR FILTER MEDIA CAPACITY TEST

AIR BLOW FILTER

60 CAPACITY TEST
AIR SUPPLY PRESSURE PSI

50
C
,&
,B

40
A
62
EG

30

20

10

0
500 1000 1500 2000 2500 3000 3500 4000 4500

AIR VOLUME IN STANDARD CUBIC FEET PER HOUR

16
 STAINLESS STEEL VALVES
CHECK VALVES PRODUCT CATALOG

AIR BLOW CHECK VALVE

BALL CHECK WITH AIR BLOW CHECK VALVE

“A” =

“B” =

“C” =

* For dimensional information see individual components

BALL CHECK WITH AIR BLOW CHECK VALVE

• Air Blow Check Valves are commonly used on ball check valves to evacuate lines of product or CIP solutions

• Easy assembly and disassembly of Air Blow Check Valve

• Buna Ball Check Valve offered standard with EPDM Air Blow Check Valve with Viton® options

PART NUMBERS FOR BALL CHECK WITH AIR BLOW CHECK VALVE
CLAMP EG45ABA-6 SIZE = “A” Connection WELD E45WWABA-6 SIZE = “A” Connection
EG45ABB-6 SIZE = “B” Connection E45WWABB-6 SIZE = “B” Connection
EG45ABC-6 SIZE = “C” Connection E45WWABC-6 SIZE = “C” Connection

*For Viton® Ball, Stem, and Elastomers Add “V” to end of part number

17
VALVES
Ball Valves

VNE 18
 STAINLESS STEEL VALVES
2 - WAY BALL VALVE SPECIFICATIONS PRODUCT CATALOG

BALL VALVES

BALL VALVES....

Ball Valves are used in a wide variety of high pressure

applications. Two factors make them popular. First, a
full unrestricted flow that allows no product restrictions
through the valve. Second, the three piece design and
the removal of a minimal number of bolts allows service
to be performed without removing the complete valve
from the line.

VNE offers two way ball valves made of T316 (CF8M)

stainless steel. PTFE seats are easily removed.
Clamp and Weld ends are standard. Other connections
are available upon request. 1/2˝ through 4˝ sizes are
available. Ball Valves meet 3A requirements.

VNE offers many options on automated ball valves.

BALL VALVE SPECIFICATIONS.... IMPORTANT FEATURES...
Size: 1/2˝, 3/4˝, 1˝, 1 1/2˝, 2˝, • 3 - Piece design - allows valve ends to remain
2 1/2˝, 3˝, 4˝ attached while servicing valve body
Material: Passivated 316 Stainless • Meets 3A requirements
Steel (ASTM A351, CF8M) • 100% Tested
• Valves marked with heat numbers for full identification
Connections: Clamp, Buttweld and Orbital and traceability
weld - other connections
available upon request • English hardware
• Maintenance and servicing is made easy with
Working Pressure: 1/2˝ - 1˝ 1,000 psi removal of a minimal number of bolts
1 1/2˝ - 2˝ 1,000 psi
• Reinforced Teflon® Seats
2 1/2˝ - 4˝ 600 psi
• PTFE Cavity Filler, fully encapsulated
Temperature Rating: -65 to 320 Degrees F • Locking device handle
• Air Actuator mounting kits which include ISO-5211
pads are available
ORDERING SPECIFICATIONS....
• Repair kits are available
Specify: • Quantity
• Product description or Part No.
• Size
• Material Type
Teflon is a trademark

VNE CORPORATION
P.O. Box 1698 • 1149 Barberry Drive • Janesville, WI 53547
TEL: 608-756-4930 • FAX: 608-756-3643 • 1-800-356-1111 • Web site: vnestainless.com
19
 STAINLESS STEEL VALVES
2 - WAY BALL VALVES PRODUCT CATALOG

CLAMP AND WELD VALVES

PART NUMBER EG90CC-6-SIZE = CLAMP
E90WW-6-SIZE = WELD

12 18 6 14 13 17 15 16

4 F

B
ØD1
I.D.

9 2 5 1 3 11 10

A
Clamp & Weld G
I

CLAMP & WELD DIMENSIONS

SIZE ISO-
INCH 5211 A B C I.D. ØD ØD1 E F G H I
1/2˝ F03 3.503 2.165 5.11 0.375 0.50 1.00 0.708 1.289 1.00 0.196 1.456

3/4˝ F03 3.976 2.362 5.11 0.625 0.75 1.00 0.728 1.437 1.00 0.196 1.456

1˝ F04 4.488 2.716 6.49 0.875 1.00 1.98 0.885 1.574 1.17 0.256 1.653
1 1/2˝ F05 5.511 3.307 7.67 1.375 1.50 1.98 1.165 1.712 1.39 0.334 1.968

2˝ F05 6.141 3.622 7.67 1.875 2.00 2.51 1.165 1.801 1.39 0.334 1.968

2 1/2˝ F07 7.756 5.000 9.92 2.375 2.50 3.05 1.750 2.204 1.95 0.472 2.834

3˝ F07 9.015 5.354 9.92 2.875 3.00 3.58 1.750 2.540 1.95 0.472 2.834

4˝ F10 9.567 6.260 13.07 3.834 4.00 4.68 1.921 2.385 2.83 0.630 3.740

Also available with orbital weld end connections. Contact VNE for dimensions.

20
 STAINLESS STEEL VALVES
2 - WAY BALL VALVES PRODUCT CATALOG

CLAMP AND WELD VALVES

PART LIST FOR CLAMP & WELD VALVES

Part
Number Description Material Qty.
Ball-1 Body ASTM-A351-CF8M 1
Ball-2C Clamp End Connection ASTM-A351-CF8M 2
Ball-2W Weld End Connection ASTM-A351-CF8M 2
Ball-3 Ball A351-CF8M 1
Ball-4 Seat PTFE 2
Ball-5 Gasket PTFE 2
Ball-6 Stem AISI-316 1
Ball-7 Thrust Washer PTFE 1
Ball-8 Stem Packing PTFE 1
Ball-9 Bolt AISI-304 4
Ball-10 Hex Nut AISI-304 4
Ball-11 Bolt Washer AISI-304 4
Ball-12 Gland AISI-304 1
Ball-13 Washer AISI-304 1
Ball-14 Nut AISI-304 1
Ball-15 Handle AISI-304 1
Ball-16 Plastic Cover Plastic 1
Ball-17 Lock Device AISI-304 1
Ball-18 Stop Pin AISI-304 1

PRESSURE TEMPERATURE RATING

E

1/2¨ - 4¨
1400 90

H
1200
80 DIN3337
70
ISO5211
1/2¨- 2¨
1000
60
PRESSURE BAR

G
PRESSURE PSI

800 50
I
40
600

30
BALL VALVE TORQUE....
400
2-1/2¨ -4¨
20
3-PC Type full port stainless steel 316 sanitary ball valve ferrule-end
and weld-end.
200
10
1/2˝ - Breakaway Torque ---- 42 In-LBS
0 3/4˝ - Breakaway Torque ---- 58 In-LBS
100 200 300 400 500 1˝ - Breakaway Torque ---- 83 In-LBS
0 50 100 150 200 250°C 1 1/2˝ - Breakaway Torque ---- 150 In-LBS
TEMPERATURE 2˝ - Breakaway Torque ---- 298 In-LBS
2 1/2˝ - Breakaway Torque ---- 512 In-LBS
3˝ - Breakaway Torque ---- 685 In-LBS
4˝ - Breakaway Torque ---- 996 In-LBS

21
 STAINLESS STEEL VALVES
3 - WAY BALL VALVE SPECIFICATIONS PRODUCT CATALOG

BALL VALVES

BALL VALVES...

Ball Valves are used in a wide variety of high pressure

applications. A full unrestricted flow allows no prod-
uct restrictions through the valve. Thus, allowing easy
diversion.

VNE offers three way ball valves made of T316 (CF8M)

stainless steel. With PTFE seats that are easily removed.
Clamp and Weld ends are standard. Other connections are
available upon request. 1/2¨ through 3¨ sizes are available.
Ball Valves meet 3A requirements.

BALL VALVE SPECIFICATIONS... IMPORTANT FEATURES...

Size: 1/2¨, 3/4¨, 1¨, 1 1/2¨, • Meets 3A requirements

2¨, 2 1/2¨, 3¨, 4¨
• 100% Tested
Material: Passivated 316 Stainless
Steel (ASTM A351, • Valves marked with heat numbers for full
CF8M) identification and traceability

Connections: Clamp & weld - other • English hardware

connections available
upon request • Reinforced Teflon® Seats

Working Pressure: 1/2¨ - 1¨ 1,000 psi • PTFE Cavity Filler, fully encapsulated
1 1/2 ¨- 2¨ 1,000 psi
2 1/2¨ - 4¨ 800 psi • Locking device handle

Temperature Rating: -65 to 350 Degrees F • Air Actuator ISO-5211 mounting pad
standard on all valves

• Repair kits are available

ORDERING SPECIFICATIONS...
• L Port is standard. T Port available upon
Specify: • Quantity request
• Product description or Part No.
• Size

22
 STAINLESS STEEL VALVES
3 - WAY BALL VALVES PRODUCT CATALOG

Clamp and Weld Valves

Part Number EG93CCC - 6 - Size = Clamp
Part Number E93WWW - 6 - Size = Weld

ISO 19
5211 4B

D
E

C
10 11 12 13 17 14 18
A
9
8
7
6 4S
5 B

2 1 3 4L 15 16
F

CLAMP AND WELD DIMENSIONS

Size ISO-

Inch 5211 A B C D E F G

1/2¨ F03/F04 4.75 3.0625 1.75 .354 .354 4.625 .375

3/4¨ F03/F04 4.75 3.25 1.875 .354 .354 5.000 .625

1¨ F04/F05 5.375 3.55 2.323 .433 .433 6.000 .875

1 1/2¨ F05/F07 7.125 4.3125 2.8125 .551 .551 6.875 1.375

2¨ F05/F07 7.125 4.50 3.25 .551 .551 7.500 1.895

2 1/2¨ F07/F10 14.5625 4.25 3.9375 .669 .669 9.000 2.375

3¨ F10/F12 15.75 5.25 5.00 .906 .866 10.250 2.875

4¨ F10/F12 15.75 6.14 5.335 .906 .866 12.50 3.834

23
 STAINLESS STEEL VALVES
3 - WAY BALL VALVES PRODUCT CATALOG

Part List for Clamp and Weld Valves

Item Part
Number Number Description Material Qty.

1 Ball - 3 - 1 - Size Body A351-CF8M 1

2 Ball - 3 - 2C - Size Clamp End Connector A351-CF8M 3
2 Ball - 3 - 2W - Size Weld End Connector A351-CF8M 3
3 Ball - 3 - 3 - Size Ball A351-CF8M 1
* 4 Ball - 3 - 4L - Size Seat Large PTFE 2
* 4 Ball - 3 - 4S - Size Seat Small PTFE 1
* 4 Ball - 3 - 4B - Size Seat Back PTFE 1
* 5 Ball - 3 - 5 - Size Gasket PTFE 1
* 6 Ball - 3 - 6 - Size Thrust Washer PTFE 2
* 7 Ball - 3 - 7 - Size O -Ring Viton 1
* 8 Ball - 3 - 8 - Size Stem Packing PTFE 1
9 Ball - 3 - 9 - Size Ring AISI-316 1
10 Ball - 3 - 10 - Size Bevel Washer AISI-301 3
11 Ball - 3 - 11 - Size Stop Pin AISI-316 1
12 Ball - 3 - 12 - Size Nut AISI- 304 2
13 Ball - 3 - 13 - Size Stem AISI-316 1
14 Ball - 3 - 14 - Size Handle AISI-304 1
15 Ball - 3 - 15 - Size Washer AISI-304 16
16 Ball - 3 - 16 - Size Bolt AISI-304 16
17 Ball - 3 - 17 - Size Prevailing Device AISI-304 1
18 Ball - 3 - 18 - Size Nut Handle AISI-304 1

19 Ball - 3 - 19 - Size Body Cap A351-CF8M 1

*Kit Ball - 3 - Kit - Size Replacement Seal kit PTFE / Viton 1

BALL VALVE TORQUE...

1/2 - 3¨
1400 3-Way full port stainless steel 316 sanitary ball valve clamp and
90
1200 weld end. To convert In / LBS to Foot LBS X .083.
80

1000 1/2 - 2¨
70 1/2¨ - Breakaway Torque --- 79 In-LBS
Pressure PSI

60
3/4¨ - Breakaway Torque --- 85 In-LBS
Pressure Bar

800
2 1/2 - 4¨ 50
600 40 1¨ - Breakaway Torque --- 110 In-LBS
30
400 1 1/2¨ - Breakaway Torque --- 290 In-LBS
20
200 2¨ - Breakaway Torque --- 680 In-LBS
10

0 100 200 300 400 500 / F 2 1/2¨ - Breakaway Torque --- 1287 In-LBS
0 50 100 150 200 250 / C 3¨ - Breakaway Torque --- 1770 In-LBS
Temperature
4¨ - Breakaway Torque --- 2035 In-LBS

24
 STAINLESS STEEL VALVES
ACTUATED BALL VALVES PRODUCT CATALOG

BALL VALVES

BALL VALVES...

Ball Valves are used in a wide variety of high pressure

applications. A full unrestricted flow allows no prod-
uct restrictions through the valve. Thus, allowing easy
diversion.

VNE offers TWO and THREE way ball valves made of T316
(CF8M) stainless steel. Ball Valves are available in Manual,
Pneumatically Actuated, and Electrically Actuated versions.
We also offer a full line of control options. Limit switches,
Solenoids, and Positioners can be included with your auto-
mated valve assembly. VNE Ball Valves feature PTFE seats
that are easily removed. Clamp and Weld ends are stan-
dard. Other connections are available upon request. 1/2¨ -
4¨ sizes are available. VNE Ball Valves meet FDA and 3A
requirements.

BALL VALVE SPECIFICATIONS... IMPORTANT FEATURES...

Size: 1/2¨, 3/4¨, 1¨, 1 1/2¨, • Meets 3A and FDA requirements

2¨, 2 1/2¨, 3¨, 4¨
• 100% Tested
Material: Passivated 316 Stainless
Steel (ASTM A351, • Valves marked with heat numbers for full
CF8M) identification and traceability

Connections: Clamp, Buttweld and • Available with pneumatic and electric actuators
Orbital Weld - other
connections available
upon request

ORDERING SPECIFICATIONS...

Specify: • Quantity
• Product description or Part No.
• Size

25
ACTUATED BALL VALVES STAINLESS STEEL VALVES
PRODUCT CATALOG

Dimensions 2-way Spring Return Actuated Valve

Valve Size A B C D E F Weight Cv Value

1/2 0.38 6.15 2.79 3.50 5.49 1.61 4.16 9
3/4 0.63 6.33 2.79 3.98 5.49 1.61 4.46 26
1 0.88 6.87 3.17 4.49 6.38 1.77 6.75 61
1 1/2 1.38 8.05 3.72 5.51 8.15 2.07 12.70 193
2 1.88 8.89 4.85 6.14 10.69 2.68 22.80 432
2 1/2 2.38 12.15 5.39 7.76 12.91 2.87 41.88 728
3 2.88 12.96 5.83 9.02 14.41 3.15 51.40 1125
4 3.83 15.52 7.88 9.57 20.55 3.94 111.20 1986

Dimensions 2-way Air to Air Actuated Valve

Valve Size A B C D E F Weight Cv Value

1/2 0.38 5.18 1.77 3.50 4.65 0.89 2.62 9
3/4 0.63 5.36 1.77 3.98 4.65 0.89 2.92 26
1 0.88 6.44 2.79 4.49 5.49 1.61 5.03 61
1 1/2 1.38 7.40 3.17 5.51 6.38 1.77 9.02 193
2 1.88 7.94 3.72 6.14 8.15 2.07 11.66 432
2 1/2 2.38 10.85 4.17 7.76 9.35 2.30 25.35 728
3 2.88 11.19 4.17 9.02 9.35 2.30 32.03 1125
4 3.83 13.30 5.39 9.57 12.91 2.87 63.91 1986

Dimensions 3-way Spring Return Actuated Valve

Valve Size A B C D E F M Weight Cv Value

1/2 4.65 7.17 3.17 0.38 6.38 1.77 2.33 7.97 L-8-T-6
3/4 5.00 7.29 3.17 0.63 6.38 1.77 2.50 8.97 L-17 T-13
1 6.00 6.92 3.72 0.88 8.15 2.07 3.00 13.94 L-25 T-19
1 1/2 6.88 8.38 4.85 1.38 10.69 2.68 3.44 28.40 L-62 T-46
2 7.50 10.08 5.83 1.88 14.41 3.15 3.75 50.76 L-148 T-92
2 1/2 9.00 12.52 7.88 2.38 20.55 3.94 4.50 93.04 L-247 T-156
3 10.25 13.58 7.88 2.88 20.55 3.94 5.13 110.04 L-351 T-230

Dimensions 3-way Air to Air Actuated Valve

Valve Size A B C D E F M Weight Cv Value

1/2 4.65 5.28 2.79 0.38 5.49 1.61 2.33 6.25 L-8 T-6
3/4 5.00 5.40 2.79 0.63 5.49 1.61 2.50 7.25 L-17 T-13
1 6.00 5.85 2.79 0.88 5.49 1.61 3.00 9.25 L-25 T-19
1 1/2 6.88 7.42 3.72 1.38 8.15 2.07 3.44 19.51 L-62 T-46
2 7.50 8.31 4.17 1.88 9.35 2.30 3.75 21.39 L-148 T-92
2 1/2 9.00 10.29 5.39 2.38 12.91 2.87 4.50 45.75 L-247 T-156
3 10.25 11.36 5.39 2.88 12.91 2.87 5.13 62.75 L-351 T 230

Dimensions shown are for assemblies sized for 80 PSI air supply. 1.2 Safety factor clean liquid products

26
 ACTUATED BALL VALVES STAINLESS STEEL VALVES
PRODUCT CATALOG

3-WAY BALL VALVE CONFIGURATION OPTIONS

Standard Actuator (CW to Close, CCW to Open)

T-Port Design

L-Port Design

27
ACTUATED BALL VALVES STAINLESS STEEL VALVES
PRODUCT CATALOG

3-WAY BALL VALVE CONFIGURATION OPTIONS

Reverse - Acting Actuator (CCW to Close, CW to Open)

T-Port Design

L-Port Design

28
 ACTUATED BALL VALVES STAINLESS STEEL VALVES
PRODUCT CATALOG

ACTUATED BALL VALVE PART NUMBERING

Example: 93C1.0C\(actuator size)D2

1.0 Clamp End 3-Way Ball Valve L Port Configuration 2 with Double Acting Actuator

*Conditions such as pressure, temperature, type of media, amount and kind of suspended material in the media, and fre-
quency of operation all affect proper actuator sizing.

29
VALVES
PVA Valves

VNE 30
 STAINLESS STEEL VALVES
SPECIFICATIONS PRODUCT CATALOG

PVA VALVE
VNE’S MODULAR DESIGN SANITARY PROCESS VALVE

PVA VALVE....

This valve has an all stainless one piece stem which

seals against the body O-ring for positive shut off. With
this design, no seals, disks, or O-rings are fastened to
the stem, which could cause product entrapment.

MODULAR DESIGN....

A modular design is used throughout this entire line of

valves.

SANITARY....

PVA valves meet 3A requirements. With this state of

the art design, it allows optimum CIP cleaning of all
product contact surfaces.

PVA VALVE....

• Available in 1.5˝ - 3˝
• Made from T316L Stainless Steel
PVA ACTUATOR....
• Offered as EPDM Standard with Viton and®

Silicone options. • Maintenance free

• Available in Shut off, Divert, and Tank Outlet • Instantly reversible from normally open (NO) to
Configurations. normally closed (NC) or vice versa.
• Available with Clamp, Weld, Bevel Seat, and E-Line • Instant assembly of electronic control head.
connections. Other connections are available upon
• Two size Actuators: 4˝ diameter for 1 1/2˝ and 2˝
request.
valves. 5˝ size for 2 1/2˝ and 3˝ valves. Made from
• Available in manual or air actuated. An electronic T304 Stainless Steel.
control head can be used with these air operated
• Position indicator stem on top of actuator shows open
valves.
or closed position.

PVA ACCESSORIES.... • Operating Air Pressure range 72 - 108 PSI.

• Micro switches with Solenoid Valve 110 or 24 volt.

R

• Indicating lights for open and closed position.

• Tank Bottom Adapter - For Tank Outlet Valve 3 Sanitary

VNE CORPORATION
P.O. Box 1698 • 1149 Barberry Drive • Janesville, WI 53547
TEL: 608-756-4930 • FAX: 608-756-3643 • 1-800-356-1111 • Web site: vnestainless.com
31
 STAINLESS STEEL VALVES
PVA VALVES PRODUCT CATALOG

7 9

77 79

97 99
EGPVA-7-NC (NO)-SIZE
EGPVA-77-NC (NO)-SIZE CONFIGURATIONS

C5

B5

A1 A2 A3 A4
A5

B3 B4
1

C1 B2
C3 B4
C1 C2
C3 C4

SHUT-OFF-VALVE DIVERT-VALVE TANK-BOTTOM VALVE

CLAMP & WELD CLAMP & WELD WELD

DIMENSION TABLE
SIZE A1 A2 A3 A4 A5 B2 B3 B4
1 1/2˝ 15 7/16 14 15/16 18 1/4 17 11/16 15 29/32 2 1/4 2 3/4 2 3/4

2˝ 16 5/16 15 7/8 19 1/2 19 16 5/16 3 3 1/8 3 1/8

2 1/2˝ 17 9/16 17 21 1/2 21 17 1/2 3 3 15/16 3 15/16

3˝ 19 18 1/2 23 22 7/16 18 1/2 3 1/4 4 3/4 4 3/4

SIZE B4 B5 C1 C2 C3 C4 C5 --
1 1/2˝ 2 3/8 2 3/8 2 3/4 2 3/4 2 3/4 2 3/4 5 7/8 --

2˝ 3 2 9/16 3 1/2 3 1/2 3 1/2 3 1/2 5 7/8 --

2 1/2˝ 3 3 7/32 3 1/2 3 1/2 3 1/2 3 1/2 7 3/32 --

3˝ 3 1/4 3 13/16 3 3/4 3 3/4 3 3/4 3 3/4 7 7/8 --

32
 STAINLESS STEEL VALVES
PVA VALVES PRODUCT CATALOG

SHUT OFF VALVE

EGPVA-7-NC(NO)-SIZE

*If control head is required add

110V or 24V to part number.
*For Manual operation
Part Number:
EGPVA-7-MAN-SIZE = Shut-Off Actuator, air 1
*For Viton add - V
® to open
reversable
*For Silicone add - S
air to close

2 Air Inlet

4 Quick Coupling 3 Fastening Bolt

3A Washer

7 Clamp 5 Bonnet / Yoke

8 Stem Seal
9 Seat Seal

10 Body
11

13 Stem
9 Seat Seal

7 Clamp

14 Lower Connection

TYPE OF PART NUMBER FOR THE COMPLETE VALVE

EPVAP = Bevel EPVAI = E-line EGPVA = Clamp EPVA = Weld

33
 STAINLESS STEEL VALVES
PVA VALVES PRODUCT CATALOG

PVA SHUT OFF VALVE

REPLACEMENT PARTS
Item # Part Number Description
1. PVAP-1-NC-(NO)-1.5 & 2.0 4˝ Actuator is reversible for normally open or normally closed
PVAP-1-NC-(NO)-2.5 & 3.0 5˝ Actuator is reversible for normally open or normally closed
2. PVAP-2-ALL Air Inlet
3. PVAP-3-ALL Fastening Bolt 2 required for 1 1/2˝ & 2˝ Valves
4 Fastening bolts required for 2 1/2˝ & 3˝ Valves
3A. PVAP-3A-ALL Washer for fastening bolt
4. PVAP-4-ALL Quick Disconnect Coupling
5. PVAP-5-1.5 Bonnet & Yoke for 1 1/2˝
PVAP-5-2.0 Bonnet & Yoke for 2˝
PVAP-5-2.5 Bonnet & Yoke for 2 1/2˝
PVAP-5-3.0 Bonnet & Yoke for 3˝
7. 13MHHMD-3.0 Heavy Duty Clamp 3˝ (For 1 1/2˝ & 2˝ Valves)
13MHHMD-4.0 Heavy Duty Clamp 4˝ (For 2 1/2˝ & 3˝ Valves)
8. PVAP-8-1.5-2.0 (S)(V) EPDM, Silicone, or Viton® Stem O-Ring (For 1 1/2˝ & 2˝ Valves)
PVAP-8-2.5-3.0 (S)(V) EPDM, Silicone, or Viton® Stem O-Ring (For 2 1/2˝ & 3˝ Valves)
9. PVAP-9-1.5 (S)(V) EPDM, Silicone, or Viton® Seat Seal for 1 1/2˝
PVAP-9-2.0 (S)(V) EPDM Silicone, or Viton® Seat Seal for 2˝
PVAP-9-2.5 (S)(V) EPDM, Silicone, or Viton® Seat Seal for 2 1/2˝
PVAP-9-3.0 (S)(V) EPDM, Silicone, or Viton® Seat Seal for 3˝
EPDM is Standard. For Viton® add V and Silicone add S to the end
of the part number. (2 required for Shut-off / 4 required for Divert)
*10. PVAP-7-10C-1.5 Tee Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-7-10C-2.0 Tee Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-7-10C-2.5 Tee Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-7-10C-3.0 Tee Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
*11. PVAP-9-11C-1.5 Cross Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-9-11C-2.0 Cross Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-9-11C-2.5 Cross Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-9-11C-3.0 Cross Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
12. PVAP-12-1.5 Seal Base Adapter 1 1/2˝ (For Divert Valve Only)
PVAP-12-2.0 Seal Base Adapter 2˝ (For Divert Valve Only)
PVAP-12-2.5 Seal Base Adapter 2 1/2˝ (For Divert Valve Only)
PVAP-12-3.0 Seal Base Adapter 3˝ (For Divert Valve Only)
13. PVAP-7-13-1.5 Stem for 1 1/2˝ Shut off
PVAP-7-13-2.0 Stem for 2˝ Shut off
PVAP-7-13-2.5 Stem for 2 1/2˝ Shut off
PVAP-7-13-3.0 Stem for 3˝ Shut off
PVAP-77-13-1.5 Stem for 1 1/2˝ Divert Valve
PVAP-77-13-2.0 Stem for 2˝ Divert Valve
PVAP-77-13-2.5 Stem for 2 1/2˝ Divert Valve
PVAP-77-13-3.0 Stem for 3˝ Divert Valve
*14. PVAP-14C-1.5 Lower Connection (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-14C-2.0 Lower Connection (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-14C-2.5 Lower Connection (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-14C-3.0 Lower Connection (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)

*TYPE OF CONNECTIONS: C = Clamp W = Butt-Weld B = Bevel Seat Thread E = E-Line Female

Viton® is registered by DuPont Dow Elastomers 34
 STAINLESS STEEL VALVES
PVA VALVES PRODUCT CATALOG

DIVERT VALVE
EGPVA-77-NC(NO)SIZE

*If control head is required add

110V or 24V to part number.
*For Manual operation
Part Number:
EGPVA-77-MAN-SIZE = Divert Actuator, air 1
to open
*For Viton add - V
®
reversable
*For Silicone add - S
air to close

2 Air Inlet

4 Quick Coupling 3 Fastening Bolt

3A Fastening Bolt Washer

7 Clamp 5 Bonnet / Yoke

8 Stem Seal
9 Seat Seal
10 Body
11

10 Body

12 Seal Base
9 Seat Seal

7 Clamp 10 Tee Body

11

9 Seat Seal
13 Stem

7 Clamp

14 Lower Connection

TYPE OF PART NUMBER FOR THE COMPLETE VALVE

EPVAP = Bevel EPVAI = E-line EGPVA = Clamp EPVA = Weld

35
 STAINLESS STEEL VALVES
PVA VALVES PRODUCT CATALOG

PVA DIVERT VALVE

REPLACEMENT PARTS
Item # Part Number Description
1. PVAP-1-NC-(NO)-1.5 & 2.0 4˝ Actuator is reversible for normally open or normally closed
PVAP-1-NC-(NO)-2.5 & 3.0 5˝ Actuator is reversible for normally open or normally closed
2. PVAP-2-ALL Air Inlet
3. PVAP-3-ALL Fastening Bolt 2 required for 1 1/2˝ & 2˝ Valves
4 Fastening bolts required for 2 1/2˝ & 3˝ Valves
3A. PVAP-3A-ALL Washer for fastening bolt
4. PVAP-4-ALL Quick Disconnect Coupling
5. PVAP-5-1.5 Bonnet & Yoke for 1 1/2˝
PVAP-5-2.0 Bonnet & Yoke for 2˝
PVAP-5-2.5 Bonnet & Yoke for 2 1/2˝
PVAP-5-3.0 Bonnet & Yoke for 3˝
7. 13MHHMD-3.0 Heavy Duty Clamp 3˝ (For 1 1/2˝ & 2˝ Valves)
13MHHMD-4.0 Heavy Duty Clamp 4˝ (For 2 1/2˝ & 3˝ Valves)
8. PVAP-8-1.5-2.0 (S)(V) EPDM, Silicone, or Viton® Stem O-Ring (For 1 1/2˝ & 2˝ Valves)
PVAP-8-2.5-3.0 (S)(V) EPDM, Silicone, or Viton® Stem O-Ring (For 2 1/2˝ & 3˝ Valves)
9. PVAP-9-1.5 (S)(V) EPDM, Silicone, or Viton® Seat Seal for 1 1/2˝
PVAP-9-2.0 (S)(V) EPDM, Silicone, or Viton® Seat Seal for 2˝
PVAP-9-2.5 (S)(V) EPDM, Silicone, or Viton® Seat Seal for 2 1/2˝
PVAP-9-3.0 (S)(V) EPDM, Silicone, or Viton® Seat Seal for 3˝
EPDM is Standard. For Viton® add V and Silicone add S to the
end of the part number. (2 required for Shut-off / 4 required for Divert)
*10. PVAP-7-10C-1.5 Tee Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-7-10C-2.0 Tee Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-7-10C-2.5 Tee Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-7-10C-3.0 Tee Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
*11. PVAP-9-11C-1.5 Cross Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-9-11C-2.0 Cross Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-9-11C-2.5 Cross Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-9-11C-3.0 Cross Body (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
12. PVAP-12-1.5 Seal Base Adapter 1 1/2˝ (For Divert Valve Only)
PVAP-12-2.0 Seal Base Adapter 2˝ (For Divert Valve Only)
PVAP-12-2.5 Seal Base Adapter 2 1/2˝ (For Divert Valve Only)
PVAP-12-3.0 Seal Base Adapter 3˝ (For Divert Valve Only)
13. PVAP-7-13-1.5 Stem for 1 1/2˝ Shut off
PVAP-7-13-2.0 Stem for 2˝ Shut off
PVAP-7-13-2.5 Stem for 2 1/2˝ Shut off
PVAP-7-13-3.0 Stem for 3˝ Shut off
PVAP-77-13-1.5 Stem for 1 1/2˝ Divert Valve
PVAP-77-13-2.0 Stem for 2˝ Divert Valve
PVAP-77-13-2.5 Stem for 2 1/2˝ Divert Valve
PVAP-77-13-3.0 Stem for 3˝ Divert Valve
*14. PVAP-14C-1.5 Lower Connection (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-14C-2.0 Lower Connection (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-14C-2.5 Lower Connection (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)
PVAP-14C-3.0 Lower Connection (C=Clamp, W=Butt-Weld, B=Bevel Seat,E=E-Line)

*TYPE OF CONNECTIONS: C = Clamp W = Butt-Weld B = Bevel Seat Thread E = E-Line Female

Viton® is registered by DuPont Dow Elastomers 36
 STAINLESS STEEL VALVES
PVA VALVES PRODUCT CATALOG

PVA AIR ACTUATOR

AIR ACTUATOR CONTROL HEAD
PVAP-ACTUC-110V (24V)
Complete Control Head 14

6
24
21 25

11 15-1
3&4 22 110V
15-2
5A 24V
13 15
5

5B
8
19
18

16

2
12
2A

7A
7 26-G 26-R 1
2L

AIR ACTUATOR

Control Head can

be added at anytime

1. Position Indicator 2. Cover Screw

7. Plate O-Ring 3. Cover Plate

7A. Plate O-Ring

for control top

Actuator
air to open reversable
air to close
Air Inlet (see page 4)

4. Shaft Seal 6. Nylon Lock Pin

5. Shaft Guide

Quick Coupling
(see page 4)

37
 STAINLESS STEEL VALVES
PVA VALVES PRODUCT CATALOG

PVA AIR ACTUATOR CONTROL TOP

REPLACEMENT PARTS
Item # Part Number Description
1 PVAP-ACTUC-1 Stainless Plug
2 PVAP-ACTUC-2 Electronic Adapter (Complete)
2A PVAP-ACTUC-2A Electronic Adapter (Actuator Side)
2L PVAP-ACTUC-2L Electronic Adapter (Line Side)
3&4 PVAP-ACTUC-3&4 Micro Switches with Harness and Terminal Strip (Complete)
5 PVAP-ACTUC-5 Micro Switch Actuator Stem
5A PVAP-ACTUC-5A Micro Switch Actuator Head
5B PVAP-ATUC-5B Stem Guide
6 PVAP-ACTUC-6 Air Vent Tube Assembly
7 PVAP-ACTUC-7 Plastic Molded Base
7A PVAP-ACTUC-7A Molded Base Complete With Electronics
8 PVAP-ACTUC-8 Adj. Screws for Micro Switch (2 Required)
10 PVAP-ACTUC-10 Actuator Tube
11 PVAP-ACTUC-11 Washer for Block
12 PVAP-ACTUC-12 Base Screws (3 Required)
13 PVAP-ACTUC-13 Switch Block
14 PVAP-ACTUC-14 Cover
15 PVAP-ACTUC-15 Solenoid Valve
15-1 PVAP-ACTUC-15-1 110V Coil Only
15-2 PVAP-ACTUC-15-2 24V Coil Only
16 PVAP-ACTUC-16 Cable Adapter Fitting
18 PVAP-ACTUC-18 Cover O-Ring
19 PVAP-ACTUC-19 Air Inlet Fitting (Upper)
20 PVAP-ACTUC-20 90° Air Fitting (Upper)
21 PVAP-ACTUC-21 Screw for Block
22 PVAP-ACTUC-22 Screws for Solenoid (2 Required)
24 PVAP-ACTUC-24 Nut and Washer for Coil-Solenoid
25 PVAP-ACTUC-25 Plug Connection to Solenoid
26G PVAP-ACTUC-26G Indicating Light (Green)
26R PVAP-ACTUC-26R Indicating Light (Red)

PVA AIR ACTUATOR

REPLACEMENT PARTS
Item # Part Number Description
1. PVAP-ACT-1 Position Indicator
2. PVAP-ACT-2 Cover Screw (2 pcs. required)
3. PVAP-ACT-3 Cover Plate
PVAP-ACT-3A Plate for Control Top (2 O-Rings Required 7 and 7A)
4. PVAP-ACT-4 Shaft Seal
5. PVAP-ACT-5 Shaft Guide
6. PVAP-ACT-6 Nylon Lock Pin
7. PVAP-ACT-7 Plate O-Ring (For Control Top Only)
7A. PVAP-ACT-7A Plate O-Ring (For Control Top Only)

38
 STAINLESS STEEL VALVES
PVA VALVES PRODUCT CATALOG

TANK-BOTTOM VALVE
EGPVA-7-TANK-SIZE
Item # Part Number Description
1 PVAP-TANK-1.5 Tank Bottom Plate for 1 1/2˝
PVAP-TANK-2.0 Tank Bottom Plate for 2˝ 1. Tank Bottom Plate
PVAP-TANK-2.5 Tank Bottom Plate for 2 1/2˝
PVAP-TANK-3.0 Tank Bottom Plate for 3˝ 7. Seal Base 3. Clamp

2. PVAP-9-1.5 (S)(V) Seat Seal, EPDM Standard, 6. Tee Body 2. O-Ring

Silicone, and Viton® option
(3 seals required)
4. Stem
PVAP-9-2.0 (S)(V) Seat Seal, EPDM Standard,
5. Bonnet & Yoke
Silicone, and Viton® option 8. Stem O-Ring
(3 seals required)
PVAP-9-2.5 (S)(V) Seat Seal, EPDM Standard,
Silicone, and Viton® option
9. Actuator
(3 seals required)
PVAP-9-3.0 (S)(V) Seat Seal, EPDM Standard, 10. Manual Handle
(Optional)
Silicone, and Viton® option
(3 seals required)
3. 13MHHMD-3.0 Clamp for 1 1/2˝ & 2˝
13MHHMD-4.0 Clamp for 2 1/2˝ & 3˝
4. PVAP-TANK-4-1.5 Stem
PVAP-TANK-4-2.0 Stem
PVAP-TANK-4-2.5 Stem
PVAP-TANK-4-3.0 Stem
5. PVAP-TANK-5-1.5 Bonnet & Yoke
PVAP-TANK-5-2.0 Bonnet & Yoke
PVAP-TANK-5-2.5 Bonnet & Yoke
PVAP-TANK-5-3.0 Bonnet & Yoke
6. PVAP-7-10C-1.5 Tee Body
(C = Clamp, W = Weld, B = Bevel Seat, E = E-Line)
PVAP-7-10C-2.0 Tee Body
(C = Clamp, W = Weld, B = Bevel Seat, E = E-Line)
PVAP-7-10C-2.5 Tee Body
(C = Clamp, W = Weld, B = Bevel Seat, E = E-Line)
PVAP-7-10C-3.0 Tee Body
(C = Clamp, W = Weld, B = Bevel Seat, E = E-Line)
7. PVAP-12-1.5 Seal Base Adapter
PVAP-12-2.0 Seal Base Adapter
PVAP-12-2.5 Seal Base Adapter
PVAP-12-3.0 Seal Base Adapter
8. PVAP-8-1.5-2.0 (V) Stem O-Ring EPDM Standard, Viton® option
PVAP-8-2.5-3.0 (V) Stem O-Ring EPDM Standard, Viton® option
9. PVAP-1-NC(NO)-1.5 & 2.0 4˝ Actuator Regulates 1 1/2˝ - 3˝ Valves
10. PVAP-MANUAL-ALL Manual Handle is Optional (Fits All Sizes)

39
 STAINLESS STEEL VALVES
PVA VALVES PRODUCT CATALOG

PVA MANUAL AND ADDITIONAL ACTUATORS

MANUAL ACTUATOR, ACTUATOR, & ACTUATOR WITH CONTROL HEAD

1 2 3
Manual Actuator Actuator Actuator
with control head

PVA MANUAL AND ADDITIONAL ACTUATORS

REPLACEMENT PARTS
Item # Part Number Description

1. PVAP-MANUAL-ALL Shut off, Divert and Tank Valve Handle Complete (Fits All Sizes)
2. PVAP-1-NC-1.5 & 2.0 Pneumatic Actuator (For 1 1/2˝ & 2˝ Valves)
PVAP-1-NC-2.5 & 3.0 Pneumatic Actuator (For 2 1/2˝ & 3˝ Valves)
3. PVAP-1-NC-1.5 & 2.0-110V (24V) Pneumatic Actuator with Control Head (For 1 1/2˝ & 2˝ Valves)
PVAP-1-NC-2.5 & 3.0-110V (24V) Pneumatic Actuator with Control Head (For 2 1/2˝ & 3˝ Valves)

40
 STAINLESS STEEL VALVES
PVA VALVES PRODUCT CATALOG

PVA VALVES DIAGRAMS

PRESSURE DROP / CAPACITY DIAGRAMS

39.36

36.08

32.80

/2¨
29.52

1-1
Headloss in Feet
26.24

22.96
2¨
19.68
B 3¨

2¨/
2-1
16.40

13.12

9.84
A
6.56

Shut - off Valve 3.28

44 88 132 176 220 264 308 352 396 440 484 528 572 616 660

Flow Rate (capacity in G.P.M.)

1 1/2¨ 1 1/2¨ 2¨ 2¨ 2 1/2¨ 2 1/2¨ 3¨ 3¨

39.36

36.08
A-B
A-C

A-C

A-B
A-C

A-C
A-B

A-B

32.80

29.52
Headloss In Feet

26.24

22.96

C 19.68

16.40

A 13.12

9.84

6.56

B 3.28

44 88 132 176 220 264 308 352 396 440 484 528 572 616 660
Divert Valve
Flow Rate (capacity in G.P.M.)

41
 STAINLESS STEEL VALVES
COMPRESSION VALVE PRODUCT CATALOG

COMPRESSION VALVE
INFORMATION
• One piece stem with O-Ring construction (easy seal • Full Polished ID and OD
replacement and positive shut-off) • All metal contact surfaces of T316L Stainless Steel
• Viton O-Ring standard (others available upon request) • Sizes range from 1.0¨ through 3.0¨
• Clamp connections are standard

PARTS BREAKDOWN
1. Body
2. Stem
2B. O-Ring Stem Seal
2C O-Ring Stem Seat
2E Cotter Pin
B
3. Bonnet
4. Handle
EG40V(SIZE)=Viton Clamp Gasket
13MHHMD(SIZE)-H=Clamp

Max. Product Pressure 150 PSI

A

Max Temperature 200°F

A

PART NUMBER SEQUENCE WHEN ORDERING COMPLETE VALVE:

EG60C (compression valve) 7 (tee style) R (rubber) 2.0 (size) Example: EG60C - 7 - R - 1.5

PART NUMBER SEQUENCE WHEN ORDERING REPLACEMENT PARTS:

EG60C (compression valve) 7 (tee style) R (rubber) 2.0 (size) - item Example: EG60C - 7 - R - 1.5 - O-Ring stem seat

Overall Length
Valve B
Size A MIN MAX Approx WT LBS
1.0 5.375 5.750 6.375 2.25

1.5 6.375 8.000 9.625 6.3

2.0 7.875 8.750 11.000 9.9

2.5 9.250 10.375 13.500 18

3.0 10.375 12.500 16.375 26.1

42