SUCCESSFUL PRESENCE IN OVER 45 COUNTRIES WORLDWIDE

www.marispolymers.com

MARIS POLYMERS SA
INDUSTRIAL AREA OF INOFITA
GR-32011 INOFITA, GREECE
TEL.: +30 22620 32918-9, FAX: +30 22620 32040
e-mail: [email protected]

MARIS POLYMERS DEUTSCHLAND GmbH MARIS POLYMERS FRANCE SARL MARIS POLYMERS ASIA Pte Ltd
Borsinghauserstrasse 21 35, Chemin de Montjean 37 Kallang Pudding Road, Block B 
D-44627 Herne F-94260 Fresnes Tong Lee Bulding, 10-01A
Germany France Singapore
Tel: +49(0)800 6227777, Fax: +49(0)800 6228888 Tél: +33(0)146689200, Fax: +33(0)146689202 Tel: +65 67463528, Fax: +65 67463529
e-mail: [email protected] e-mail: [email protected]  e-mail: [email protected]
LIQUID-APPLIED POLYURETHANE WATERPROOFING SYSTEM
A flat roof is constantly exposed to humidity,
ultraviolet degradation, weathering, acid rain attack,
mechanical wear and ongoing movement stresses,
due to temprature changes. As a result, most flat
roofs are leaking and require a renovation.

The professional, long lasting,

waterproofing solution is the

The is a group of coatings

based on Polyurethane resins, which used in
combination, creates a seamless membrane on the
flat roof, that protects the building structure reliably
and on a long term basis, even under the most
difficult conditions.
 Professional waterproofing applicators in over 45 countries, use the
for demanding waterproofing. The reasons are:

• Simple application.
• When applied, forms a seamless membrane,
without joints or leak possibilities.
• Resistance to water.
• Crack-bridging up to 2mm, even at -100C.
• Maintainace of its mechanical properties,
over a temprature span of -300C bis 800C.
• Provides water vapor permeability.
• Provides full surface adhesion.
• Provides sun reflectivity, contributing to thermosinsulation.
• Provides anti-root properties.
• The waterproofed surface can be used for medium
to heavy pedestrian traffic, depending on the
MARISEAL SYSTEM top-coat.
• Resistant to detergents, oils and common chemicals.
• Easy local repair, if the membrane is mechanically damaged.
• Low cost.

uses
The can be used on:
• Roofs, Balconies and Terraces
• Wet areas
• Water tanks
• Flowerbeds
• Public Walkways
• Foundations, etc.
 Products range

The MARISEAL SYSTEM consists of

MARISEAL PRIMERS

The MARISEAL 710 is a fast curing, one-component polyurethane

primer, used to prepare absorbent surfaces like concrete, cement screed,
mortar, wood, etc.

The MARISEAL AQUA COAT is a two-component epoxy waterbased

primer, used to prepare the majority of construction surfaces including
absorbent and non-absorbent surfaces like bitumen-felts, ceramic tiles,
moist concrete, etc.

MARISEAL WATERPROOFING COATINGS

The MARISEAL 250 is a premium, one-component, permanent elastic,

liquid applied polyurethane coating, that cures to a seamless, high
elastic waterproofing membrane. Used on most waterproofing
applications, as roofs, balconies, terraces, etc.

The MARISEAL DETAIL is a one-component, permanent elastic, liq-

uid applied polyurethane coating, reinforced by fibers. It is used to wa-
terproof details on the roof lixe exhaust pipes, complex details, etc.

The MARISEAL 270 is a one-component, permanent elastic, liquid

applied polyurethane coating, that cures to a seamless, elastic waterproofing
membrane. Used on wet areas, foundations, balconies (below tiles), etc.

The MARISEAL 310 is a two-component, solvent free, liquid-applied,

permanent elastic polyurethane coating that cures to a seamless,
elastic waterproofing membrane. Used in potable water tanks, water
channels, sewage tanks, etc.
MARISEAL TOP COATS

The MARISEAL 400 is a pigmented , colorfast, UV-stable, permanent

elastic, one-component aliphatic polyurethane coating, used as a
top-coat over exposed polyurethane waterproofing coatings. Used on
roofs and terraces where a medium pedestrian traffic is expected.

The MARISEAL 420 is a pigmented , colorfast, UV-stable, permanent

hard-elastic, one-component aliphatic polyurethane coating, used as a
top-coat over exposed polyurethane waterproofing coatings.
Used on public walkways and areas where a heavy pedestrian traffic is
expected.

The MARITRANS is a transparent, UV-stable, permanent hard-elastic,

one-component aliphatic polyurethane coating, used as a sealer over
decorative polyurethane waterproofing coatings. Used on balconies and
terraces where a medium pedestrian traffic is expected.
The MARITRANS can be also used as a transparent coating to
waterproof ceramic tiles surfaces.

MARISEAL SYSTEM AUXILIARY PRODUCTS

MARISEAL FABRIC MARISEAL DECOFLAKES
Polyester, non-wooven, reinforcing geotextile. Used for reinforcing Decorative, colored flakes (chips) for broadcasting
at roofing details or the eintire surface. over the MARISEAL 250.
MARISEAL SPEED-CAT
Accelerator for use with the MARISEAL 250 and MARISEAL 270. MARISEAL DECOQUARTZ
Decorative, colored silica sand for broadcasting over
the MARISEAL 250.
MARIFLEX PU 30
Low modulus Polyurethane sealant used to seal joints and cracks.

application tools
Electric Sealant
Roller Brush paddle application
drill gun
 Details

No Problem with Details

All the waterproofing coatings of the MARISEAL SYSTEM cure to form
permanently elastic, seamless membranes providing waterproofing on
a long-term basis, to even the most difficult and problematic details.

While other waterproofing membranes fail at these difficult

detail areas, the MARISEAL SYSTEM has proven itself to
perform, even uat the most extreme climatic zones on the planet.

The MARISEAL SYSTEM creates a seamless membrane with full

surface adhesion to the surface so additional mechanical fixings or
additional flashings are required even at the most awkward details.

Coping Detail

250 or
MARISEAL DETAIL

Abutment Detail External Corner Abutment Detail

or
MARISEAL DETAIL

or
MARISEAL DETAIL
Gutter Detail

MARISEAL 400
MARISEAL FABRIC
MARISEAL 250/DETAIL
MARISEAL AQUA-COAT

Crack Detail

Pipe Detail

or MARISEAL DETAIL
Waterproofing of Roofs, Balconies and Terraces

the backbone of the MARISEAL SYSTEM is the

which functions as the main elastic and waterproofing membrane
of the system.
The MARISEAL 250 is a one-component, liquid-applied, cold
applied and cold curing, polyurethane coating that cures to a
seamless, highly permanent elastic waterproofing membrane.
The MARISEAL 250 is used on most waterproofing applications as:

ROOFS
BALCONIES
TERRACES
WET AREAS
PUBLIC WALKWAYS
FLOWERBEDS
POLYURETHANE FOAM PROTECTION
The MARISEAL 250 has been tested by the German State Testing Institute for
Construction Materials MPA-Braunschweig, according the European Union Directive
for liquid-applied roof waterproofing ETAG 005, and was found conforming.
The MARISEAL 250 was tested by the French Testing Institute for Construction
Materials BUREAU-VERITAS according the French Norms and was found conforming.

The MARISEAL 250 was certified by the German State Intitute for Construction
Techniques DIBt-Berlin, with the European Technical Approval (ETA) and with the CE
mark and certification.

LEVELS OF USE CATEGORIES ACCORDING ETAG 005:

Working Life: W2 10 years minimum

Climate zone: M and S North and South Europe
Imposed loads: P1 to P3 Up to high pedestrial traffic
Dachneigung: S1 bis S4 Roof slope from <50 to >300
Lowest surface temperature: TL3 -300 C
Highest surface temperature: TH3 +800 C
Reaction to fire: Class E EN 13501, DIN 4102-1 und -7
Resistant to wind loads: >50 kPa Resistant to all wind loads

The MARISEAL 250 was additionally tested and approved Root Resitance
according: for Waterproofing
DIN 1928, which classifies it as a waterproofing coating. of Green Roofs
DIN 4102 part I, which classifies it as a B2 fire rating construction
material.
DIN 4102 part 7, which classifies it as a surface coating resistant to The MARISEAL 250 was tested according EN 53420
flying sparks and radiating heat. which classifies it as a root-resistant coating, suitable to
The MARISEAL 250has also been tested and certified in be used in flowerbeds and planters.
many countries around the world according to local and national
regulations and norms.
Waterproofing of Wet Areas & Foundations

The MARISEAL 270, is the elastic and waterproofing coating

of the system when used in concealed areas and below ground
applications.
The MARISEAL 270 is a one-component, liquid-applied, cold
applied and cold curing, polyurethane coating that cures to
a seamless, permanent elastic waterproofing membrane.
The MARISEAL 270 is used on waterproofing applications as:

WET AREAS (under tile)

FOUNDATIONS

RETAINING WALLS, etc

The was specially developed to meet the

economical demands of today’s construction industry, by provid-
ing the highest product quality matched with a very interesting pric-
ing.

Waterproofing of potable Water Tanks

The is the elastic and waterproofing coating of

the system when used in potable water tanks, water channels and
sewage tanks.
The is a two-component, odourless, solvent-
free, liquid-applied, polyurethane coating that cures to a
seamless, permanent elastic waterproofing membrane.
The is used on waterproofing applications as:

WATER TANKS

WATER CHANNELS

SEWAGE TANKS, etc

The is certified for direct and permanent

contact with potable (drinking) water.
Detail Waterproofing
mariseal 310

The is a one-component, semi-thixotropic

permanent elastic, liquid-applied, fiber reinforced, polyurethane
coating. The is used to waterproof complex
roof details like:

PIPES

LIGHT DOMES

AIRCONDITION UNITS
ETA 09/0241

PHOTOVOLTAIC UNITS

CHIMNEYS, GUTTERS, etc.

The can be used on:

MORTAR BETON BRICK

MINERAL FINISHED BITUMENFELT PLAIN BITUMENFELT PVC AND EPDM MEMBRANE

METAL PVC, ALUMINIUM PROFILE WOOD

By using the all complex roof details are quickly Estrich

and securly waterproofed. MARIS POLYMERS, with over 60 years
combined experience in developing polyurethane systems, have
formulated the to meet modern construction
demands.
Top Coat for Roofs, Balconies and Terraces

For a perfect waterproofing as well as optical result,

the top-coat is applied over the main
MARISEAL waterproofing membrane, to give a decorative
and color-stable finish.
The is an elastic, pigmented, color stable,
aliphatic polyurethane top-coat that is applied over the main
waterproofing membrane, providing a glossy, decorative and
easy-to-clean surface.
The is color stable, UV-stable and weather
resistant.
It has been tested and certified by the German State
Institute Materialpruefanstalt MPA-Braunschweig, as a
non-yellowing, color stable and non-chalking coating.
Top Coat for Public Pedestrian Areas

The MARISEAL SYSTEM, can be applied on surfaces

that require a wear resistant and abrasion resistant finish,
to withstand heavy pedestrian traffic conditions, as public
pedestrian walkways, stadiums, etc.
This is accieved by using the over the main
MARISEAL waterproofing membrane.
The is a hard-elastic, pigmented color
stable, aliphatic polyurethane top-coat that is applied over
the main waterproofing membrane, providing a wear
resistant finish that can withstand heavy pedestrian and light
vehicle traffic conditions.
The use of the results in a abrasion resistant,
glossy and easy-to-clean surface which is color stable, UV-
stable and free of chalking.
 Application

1
Surface Preparation
Cracks are filled with the MARIFLEX PU30 joint-sealant (step 1). The sealed crack is then covered with the MARISEAL waterproofing coating, and
then reinforced with a piece of MARISEAL FABRIC (step 2). The rest of the surface is then primed with the appropriate MARISEAL primer (step 3),
depending on the substrate.

Waterproofing of Critical Areas

Critical areas, such as wall-floor connections, pipe outlets, chimneys, siphons etc. must first be waterproofed with the MARISEAL waterproofing coating and
reinforced with the MARISEAL FABRIC. The MARISEALFABRIC is rolled over the still wet waterproofing coating and pressed in to soak (step 4, 5). Enough
MARISEAL coating is then applied until full saturation of the fabric (step 6).

Surface Waterproofing
The MARISEAL waterproofing coating is being applied on the prepared surface (step 7). The MARISEAL FABRIC is applied as previously described (step
8, 9, 10).

Top-coat application
After curing of the waterproofing membrane, the appropriate MARISEAL top-coat is being applied on the entire surface (step 11).
 IMPRESSIVE REFERENCES IN ALL INDUSTRIES
SOME OF THE PROJECTS IN WHICH MARIS POLYMERS PRODUCTS WHERE USED :

AUTOMOTIVE FOOD INDUSTRY PUBLIC BUILDINGS

VOLKSWAGEN COCA COLA ATHENS AIRPORT
VOLKSWAGEN, WOLFSBURG PEPSI DUBAI INTERNATIONAL AIRPORT
VOLKSWAGEN, ZWICKAU SOGAT, SUGAR PROCESSING HIPPOKRATION HOSPITAL
AUDI KATOGI, WINES EGYPTIAN CHAMBER OF COMMERCE
BMW BOUTARIS, WINES BANK OF GREECE
CITROEN HBI, FRESH JUICES OSK-GREEK SCHOOL BUILDING AUTHORITY
DAEWOO ARACHTHOS, FRESH JUICES EGYPTIAN KHALADEEN GARDENS
FIAT BOSINAKIS, BAKERY PRODUCTS PRINCE TALLAL VILLA, CAIRO
HONDA KARAMOLEGOS, BAKERY PRODUCTS CHELABINSK CITY BUSINESS CENTER, RUSSIA
LADA BLUE BELL, FROZEN FOODS MAIN BUILDING OF COAST GUARD MESSINA
ABU DHABI FORMULA 1 TRACK KORONA, PASTA SICILY, ITALY
MAZDA FLOCA, SWEETS CATHEDRAL RAGUSA, ITALY
MERCEDES-BENZ BEKA, MEAT PROCESSING US EMBASSY, SKOPJA
NISSAN AFRICOFFEE, COFFEE OLYMPIC BATMINGTON STADIUM
ROVER HELLAS CAN, CANNED FOODS FOOTBALL STADIUM, BULGARIA
CTR CITROEN PLAZA AEGEAN MUSHROOMS ASTRONOMY BUILDING, SINGAPORE
DUBAI MOTOR CITY EL.PA., OLIVE OIL SEVERAL PUBLIC CHILDREN PLAYGROUNDS
AUTOSTRADA, MESSINA SICILY BEF, SAUCES BARCELONA AIRPORT, SPAIN
SILIGRADO, MILK PROCESSING NORWEGIAN REFUGEE PROJECT- HOUSING
COMPUTERS AND ELECTRONICS PROJECT, LEBANON
AEG HOTELS AND TOURISTIC VOLLEY STADIUM CATANIA, SICILY ITALY
INTEL MICRO PROCESSORS HILTON HOTEL
DATA ELECTRONICS INTERCONTINENTAL HOTEL UNIVERSITIES
INTRACOM ORIENTAL MANDARIN HOTEL UNIVERSITY OF ATHENS
LOGIC DATA MARRIOT HOTEL UNIVERSITY OF ALEXANDRIA
GENERAL BATTERIES ATLANTIS HOTEL AT THE PALM ISLAND UNIVERSITY OF JERUSALEM
NETCOM HOTEL THEOXENIA PALACE UNIVERSITY OF PIRAEUS
PILUX HOTEL PRESIDENT UNIVERSITY OF THESSALONIKI
HOTEL GRAND CHALET TECHNION ENGEENIRING ACADEMY, ISRAEL
PETROL, CHEMICAL HOTEL SOSIMEX SAINT LUCIA UNIVERSITY, AUSTRALIA
AND HEAVY INDUSTRY ADA HOTEL BILFEN SCHOOL, TURKEY
EKO MARAKIA TOURISTIC VILLAGE TECHNICAL UNIVERSITY, SLOVENIA
ESSO SMOUHA CLUB UNIVERSITY OF OPORTO, PORTUGAL
BAYER JUMEIRAH BEACH HOTEL UNIVERSITY OF BARCELONA
ELF GLORIA HOTEL
KRUPP GOKSU HOUSING COMPLEX MILITARY
DOW ADEM HAVVA HOTEL, GREEK ARMY
MGF GREEK NAVY
ALUMIL TEXTILE AND CLOTHING INDUSTRIES GREEK AIR FORCE
EXPO-METAL BSB
ALU-NORF DIESEL WATER, ELECTRICITY AND TELECOM
ALU-SUISSE EROS DEH, GREEK ELECTRICITY PROVIDER
KONTI PUTMAN EYDAP, ATHENS WATER PROVIDER
ELFICO BOTEKS TEXTILE ATHENS CENTRAL SEWAGE PLANT (PSITALIA)
GASPROM HEAD OFFICE OTE, GREEK TELECOMMUNICATIONS PROVIDER
MELKO PETROLIOUM INDUSTRIES IN SEVERAL CATEGORIES TEL AVIV WATER PROVIDER
RUSSIAN BELOGIARSKA NUCLEAR STATION EKSIOGLY ALMET
ACP CHEMICAL SABA INDUSTRIALS COSMETIC AND PHARMACEUTICAL INDUSTRIES
SPRAY PACK LOREAL HELLAS
SUPER MARKETS TETRA PACK AGIS
CARREFOUR ALEMCO ELPEN
BAUHAUS JEWELER URAL FACTORY
STINNES METAL YAPI KONUT SHIPPING
AB-BASILOPOULOS KALELI INSAAT SUPERFAST FERRIES
MARINOPOULOS KRAVSIDONA BRIDGE MINOAN FERRIES
METRO NOVURASK SANITARY LANDFILI HELLAS FERRIES
TRESCO TIMEX FACTORY ALLIED MARITIME
IDEA STORES BARCLEY SHIPPING
PRINTING INDUSTRIES THENAMARIS SHIPPING
WOOD AND FURNITURE INDUSTRIES DIKAIOS WORLD WIDE OCEAN CARTERING
IKEA STATHATOS VANIMAR INC.
DROMEAS LORETZOS
CHAMILOS TZERBINIS OLYMPIC STADIUMS
METRO KARABATELIS OLYMPIC BASEBALL STADIUM
KYRIAZIS (USED IN THE OLYMPIC GAMES IN ATHENS 2004)
FILIPOPOULOS TRANSPORT AND AVIATION OLYMPIC KARAISKAKI STADIUM
OSE-GREEK RAILWAYS (USED IN THE OLYMPIC GAMES IN ATHENS 2004)
ANIMAL AND FISH BREEDING OLYMPIC AIRWAYS OLYMPIC VILLAGE, GREECE
FARMS ALEXANDRIA TRAM AUTHORITY BRUNEI OLYMPIC STADIUM
AGGELAKIS BALLAUF LOGISTICS PAOK FOOTBALL STADIUM
LETSOS TRANMERE TRANSPORTS ALEPPO FOOTBALL STADIUM
SEA FARM IONION MESSINA AIRPORT SICILY
OLYMPOS SEA FARM AND MANY OTHERS

FREEZERS
ARCTIKI
GROBAL INT.
THERMOVENT,