80% found this document useful (5 votes)
6K views6 pages

Hcia-Wlan v3.0 Q&A

1. The document contains questions and answers about wireless LAN technologies including Wi-Fi standards, network architectures, device configurations, and common troubleshooting steps. 2. Key topics covered include wireless LAN networking modes, CAPWAP tunnel establishment, AP deployment best practices, RF channel planning, and STA authentication processes. 3. Common commands for querying device information and troubleshooting issues are also listed, such as displaying AP configurations, online users, and STA failure records.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
80% found this document useful (5 votes)
6K views6 pages

Hcia-Wlan v3.0 Q&A

1. The document contains questions and answers about wireless LAN technologies including Wi-Fi standards, network architectures, device configurations, and common troubleshooting steps. 2. Key topics covered include wireless LAN networking modes, CAPWAP tunnel establishment, AP deployment best practices, RF channel planning, and STA authentication processes. 3. Common commands for querying device information and troubleshooting issues are also listed, such as displaying AP configurations, online users, and STA failure records.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

1. If a WLAN is deployed in AC + Fit AP networking the Aps work in full-duplex mode.

Ответ
False
2. A WLAN built with 802.11ax Aps allows access for only 802.11ax STAs.

Ответ
False
3. OFDM … that is, the two subcarriers are orthogonal and have no interference.

Ответ
True
4. In an area with roaming requirements two neighboring APs need to have more than 50% signal
coverage overlapping to roam seamlessly between them.

Ответ
False
5. What is the maximum number of source IP addresses that can be specified for an AC to establish
CAPWAP tunnels with APs?

Ответ
1
6. Which of the following statements about CAPWAP tunnel establishment is true when Option 43
is correctly configured in a WLAN layer 2 networking scenario?

Ответ
If an AC receives no Discovery….to discover the AC

7. Which of the following channels overlap on the 2.4 Ghz frequency band?

Ответ
6 and 11

8. Which of the following commands is used to display information about online users on a Huawei
AC?

Ответ
Display user all

9. Which of the following statements about the antenna azimuth and downtilt is false?

Ответ
….north plane to the antenna plane

10. Which of the following statements about 2.4 Ghz channels is true?

Ответ
1,5,9 and 13

11. Based on the application scope, wireless networks can fall into:
Ответ
ABCD
12. Which of the following are characteristics of Huawei WLAN solution?

Ответ
ABCD

13. What technologies are user at the 802.11 PHY Layer?

Ответ
OFDM, OFDMA, QAM, MU-MIMO, channels bonding, bss coloring…
14. Which of the following statements about CAPWAP tunnels are true?

Ответ

On a Layer 3 WLAN, if the DHCP Option 43 field is not configured, an AP can discover an AC
using DNS.

15. Which of the following phases are included in the STA going-online process?

Ответ
A. Scanning C. Association D. Authentication

16. Whats is MIMO technology?

Ответ
Frame Aggregation, Block Acknowledgement (BA), A-MPDU, RTS/CTS
17. Which of the following ACs has the highest forwarding performance?

Ответ

AC6800V

18. An enterprise needs to implement device redundancy on a WLAN to ensure


network stability. The enterprise requires that ACs have high reliability, the switchover speed be
high when a link fault occurs, and the active and standby ACs are deployed at the HQ. In this
scenario, which AC high reliability solution can the enterprise use?

Ответ
VRRP HSB

19. Which of the following are reasons for device software upgrade?

Ответ

A. Fixing system vulnerabilities B. Optimizing system resources C. Adding new functions

20. Which of the following belong to link authentication?

Ответ
A. Open system authentication B. Shared key authentication
21. Which of the following profiles can be bound to an AP group?

Ответ
B. Regulatory domain profile D. VAP profile

22. After a VAP profile is configured, it can be bound only to an AP group but not to a single AP.

Ответ
False
23. Which of the following commands is used to query the cause for a STA's failure to go online?
Ответ
display station online-fail-record

24. Which of the following symptoms may occur on an AP that is interfered by air interface signals?

Ответ

B. High channel utilization C. High noise floor D. A large number of Missed Beacon frames

25. Which of the following antenna types are classified by direction?

Ответ

A Omnidirectional antenna, D Directional antenna


26. 23 dBm = ? mW

ответ
▫ +23 dBm can be divided into +10 dBm, +10 dBm, and +3 dBm.
▫ The calculation procedure is as follows:
▪ 1 mW x 10 = 10 mW
▪ 10 mW x 10 = 100 mW
▪ 100 mW x 2 = 200 mW

27. Which of the following obstacles will cause the highest attenuation of 2.4 GHz signals if they
have the same thickness?
Ответ
Metal

28. Which of the following belongs to the AP deployment principle?

Ответ

A. When installing an AP, try to reduce the number of obstacles that signals traverse.

B. Ensure that the front side of an AP fources.Ps far faces the coverage area.

D. Deploy APs far from interference srom interference sources.


29. Why is channel planning required? How to plan channels?

Ответ

▫ To prevent interference between channels, the interval between central frequencies of each two
channels in the 2.4 GHz frequency band must be larger than or equal to 25 MHz. It is recommended that
channels 1, 6, and 11 be used in overlapping mode.
▫ In the 5.8 GHz frequency band, non-overlapping channels 149, 153, 157, 161, and 165 are
used, with 20 MHz of separation between each two channels.

30. What is the angle (degrees) between an omnidirectional antenna and the horizontal radiation
pattern?

Ответ
0

31. The AP goes online through the following phases.

1.
2.
3.

4.

Which of the following sequences is correct?

Ответ
4>2>1>3

32. Beamwidth is an important parameter for directional antennas. It refers to the angular width of
the radiation pattern between the beam peak and the half-power points. How much lower are
half-power points from the beam peak?

Ответ
3dB

33. The APs deployed on the first floor of a building work on channels 1,6 and 11. In the same
direction, witch of the following channel plans is recommended for three APs on the second
floor?

Ответ
Channel 11,6 and 1

34. Which type of frames does a STA send to obtain surrounding wireless network information
during active scanning?

Ответ
Probe request frame

35. If an AP cannot go online due to version mismatch, which of the following commands can be
used to locate this fault?
Ответ
Display ap global configuration

36. Given that the gain of antenna A is 11dBi and that of antenna B is 8 dBi, what is the difference
between the gains of the two antennas?

Ответ
3dBi

37. Wi-Fi 6 is the latest generation of the 802.11 standard launched by the Wi-Fi alliance. It has
advantages such as high bandwidth and low latency. What is the maximum theoretical rate of
the a wifi 6 AP on the 2.4 Ghz frequency band?

Ответ
1.15Gbps

38. Which of the following is not displayed after the display ap all command is executed on a
Huawei AC?

Ответ
Channels of APs

39. Large-scale Wlan project plans to deploy 1. AirEngine 9700 -M -AC, 100 …..how many AP licenses
must you apply for so that all APs can work properly?

Ответ
700
40. The following configuration are required to deploy a wlan
1.
2.
3.
4.
5.

Ответ
7>4>3
41. An AC has only one interface connected to an aggregation switch through which user traffic
reaches the internet without passing through the AC. Which of the following networking + data
forwarding modes can meet this requirement?

Ответ
In-path networking + direct forwarding

42. Which of the following is the basic network architecture consisting of multiple Aps and
distribution systems connecting the APs?

Ответ
BSS
43. Portal authentication is a commonly used authentication mode. Which of the following
statements about portal authentication is true?
Ответ
The real time accounting internal of portal aut…of APs.
44. Which of the following makes CCMP encryption more secure than TKIP encryption?

Ответ
key distribution mechanism rather a single key
45.

You might also like