Scribd
Upload
473 views1 page

Chemical Composition % of Steel C40 (1.0511) : EN 10277-2-2008

This document provides information on the chemical composition, mechanical properties, equivalent grades, available formats and thicknesses of steel C40 (1.0511) according to EN 10277-2-2008. It lists the maximum percentages of carbon, silicon, manganese, nickel, phosphorus, sulfur, chromium and molybdenum allowed in the steel. It also provides data on the tensile strength, yield strength and minimum elongation at fracture for various nominal thicknesses of the steel. Finally, it lists equivalent steel grades from different countries and formats/thicknesses commonly available from the supplier.

Uploaded by

Corne
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
473 views1 page

Chemical Composition % of Steel C40 (1.0511) : EN 10277-2-2008

This document provides information on the chemical composition, mechanical properties, equivalent grades, available formats and thicknesses of steel C40 (1.0511) according to EN 10277-2-2008. It lists the maximum percentages of carbon, silicon, manganese, nickel, phosphorus, sulfur, chromium and molybdenum allowed in the steel. It also provides data on the tensile strength, yield strength and minimum elongation at fracture for various nominal thicknesses of the steel. Finally, it lists equivalent steel grades from different countries and formats/thicknesses commonly available from the supplier.

Uploaded by

Corne
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

C40

1.0511

Chemical composition % of steel C40 (1.0511): EN 10277-2-2008


Cr+Mo+Ni = max 0.63

C Si Mn Ni P S Cr Mo
0.37 – 0.44 Max 0.4 0.5 – 0.8 max 0.4 max 0.045 max 0.045 Max 0.4 max 0.1

Mechanical properties of steel C40 (1.0511)


Nominal thickness (mm): to 16 16 - 100 100 - 250
Rm - Tensile strength (MPa) (+N) 580 550 530
Nominal thickness (mm): 5 - 10 10 - 16 16 - 40 40 - 63 63 - 100
Rm - Tensile strength (MPa) (+C) 700-1000 650-980 620-920 590-840 550-820

Nominal thickness (mm): to 16 16 - 100 100 - 250


Re – Upper yield strength or
320 290 260
Rp0.2 – 0.2% proof strength (MPa) (+N)
Nominal thickness (mm): 5 - 10 10 - 16 16 - 40 40 - 63 63 - 100
Rp0.2 – 0.2% proof strength (MPa) (+C) 540 460 365 330 290

Nominal thickness (mm): 5 - 10 10 - 16 16 - 40 40 - 63 63 - 100


A - Min. elongation at fracture (%) (+C) 6 7 8 9 9

Nominal thickness (mm): to 16 16 - 100 100 - 250


A - Min. elongation Lo = 5,65 √ So (%) (+N), 16 17 17

Brinnel hardness (HBW): (+SH) 163 - 211

Equivalent grades of steel C40 (1.0511)


EU USA Germany France England Italy Russia Inter
EN - DIN,WNr AFNOR BS UNI GOST ISO
1.0511 AF60C40 070M40 C40
1038
C40 C40 AF60C40 080M40 C40 40 C40E4
1040
Ck40 XCV42HI En8

Formati e spessori disponibili


thickness (mm) formato lamiere thickness (mm) formato lamiere
8 50
10 55
12 60
15 65
20 70
22 80
25 90
30 100
32 120
35 150
40 180
45 200

Normalmente disponibile a magazzino


B.I.L. Cutting S.r.l.
Via Circonvallazione Est, 20/b - 27023 fraz. Molino del Conte - Cassolnovo (PV)
e_mail Pec: [email protected] – e_mail [email protected] – www.bilcuttingsrl.com - Tel./Fax: +39 0381 929073
P.iva / Cod. Fisc.: 10382880960 - Iscrizione CCIAA Pavia n° PV297017 - Cap. Soc. 50.000,00 € i.v.

You might also like