Spec No.
: ZTT 20-112747
TECHNICAL SPECIFICATION
ZTT JD-OpfitTM Fittings and Accessories
October 24,
A Victor FQ.Xu
FQ.Xu Felix
2020
Version Date Prepared Reviewed Approved
Address: No.88,Qixin Road, Nantong, Jiangsu Province, P.R. China
Website: www.zttcable.com
170 80 47 1470
1 2 3 4 5
M18
22
OPGW
1800
5 0
6x
M1 7 (AAC, 95mm², 2m)
Note:
1. Min. holding Strength: 95% UTS of OPGW;
2. Hot-dip galvanized to ASTM A153;
3. All dimensions are in millimeters;
4. The diameter and UTS of OPGW:13.50mm, 100.0kN;
5. The stranding direction of OPGW outer layer is left hand;
6. Version numbers may be supplemented to our products' models.
7 Earth Bonding Lead JDX-95-2000 Aluminum 1
6 Parallel Groove Clamp JBL-16-120B Aluminum Alloy 1 General Tolerance
5 Structural Reinforcing Rods ONN Al.-Clad Steel 1 <=30 ±1.5mm ANGLE: Tension Set for OPGW
中天
4 Dead-End Component ONW Al.-Clad Steel 1 >30 ±5% ± TYPE： ON-100-1350S 中天科技
3 Thimble Clevis TC-12 Galv. Steel 1 100kN Weight ±15% Brand JD-OpfitTM
2 Strap PD-10 Galv. Steel 1 100kN Drawing Victor 2020-10-24 Mass Scale NTS
Jiangsu Zhongtian
1 Shackle U-10 Galv. Steel 2 100kN Checked FQ.Xu 2020-10-24
Technology Co., Ltd. JSF-112747-1 REV B
Item Description Cat. No. Material QTY U.T.S Approved Felix 2020-10-24
22
M18
1
85
100 2
3 4 5 6
7
69
OPGW
2400
8 (AAC, 95mm², 2m)
50
6x
M1
3000
Note:
1. Min. vertical failing load: 100kN;
2. Min. slip load:25%UTS of OPGW;
3. Hot-dip galvanized to ASTM A153;
4. All dimensions are in millimeters;
5. The diameter and UTS of OPGW:13.50mm, 100.0kN;
6. The stranding direction of OPGW outer layer is left hand;
8 Earth Bonding Lead JDX-95-2000 Aluminum 1 7. Version numbers may be supplemented to our products' models.
7 Parallel Groove Clamp JBL-16-120B Aluminum Alloy 1
6 Structural Reinforcing Rods OCN Al.-Clad Steel 1 General Tolerance
5 Outer Rods OCW Aluminum Alloy 1 <=30 ±1.5mm ANGLE: Suspension Set for OPGW
中天
4 Elastometer Insert XJ-10 EPDM 1 >30 ±5% ± TYPE: OC-0800-1350S 中天科技
3 Cast Aluminium Clamp TK-10 Aluminum Alloy 1 100kN Weight ±15% Brand JD-OpfitTM
2 Eye Link ZH-10 Galv. Steel 1 100kN Drawing Victor 2020-10-24 Mass Scale NTS
Jiangsu Zhongtian
1 Shackle U-10 Galv. Steel 1 100kN Checked FQ.Xu 2020-10-24
Technology Co., Ltd. JSF-112747-2 REV B
Item Description Cat. No. Material QTY U.T.S Approved Felix 2020-10-24
1
2
OPGW
3
10
340
5
458
6
OPGW
7
Note: 9
1.Fiber bending additional attenuation:≤0.01dB;
2.Fiber bending radius:≥30mm;
3.Retaining fiber length:≥1.6m; 8
4.Applicable temperature range: 40℃ ~+65℃;
5.All dimensions are in millimeters;
6.The OPGW Al Tube outer-diameter: 8.00mm;
7.Version numbers may be supplemented to our products' models.
206
10 Joint Box Cover Al-alloy 1
9 "S" Tighten Steel Galv. Steel 1
Front and Back Clips outside the Box
8 Al-alloy 1
(including optical cable filling piece)
7 Joint Box Body's Seal Ring Rubber 1
6 Joint Box Body Die-casting Al-alloy 1 General Tolerance Joint Box for
5 Adapter Al-alloy 2-6 <=30 ±1.5mm ANGLE: OPGW-OPGW
中天
4 Tray Sheet Tighten Tray Support Steel 1 >30 ±5% ± on Tower 中天科技
3 Fiber Coiling Sheet Cover Plastic 1 Weight ±15% TYPE:PTKO20T-24D Brand JD-OpfitTM
2 Fiber Coiling Sheet Plastic 1-5 Drawing Victor 2020-10-10 Mass Scale NTS
Jiangsu Zhongtian
1 Top Lock Ribbon Stainless Steel 1 Checked FQ.Xu 2020-10-10
Technology Co., Ltd. JSF-6007 REV A
Item Description Material QTY Approved Felix 2020-10-10
1
2
OPGW
3
10
340
5
458
6
ADSS
7
Note: 9
1.Fiber bending additional attenuation:≤0.01dB;
2.Fiber bending radius:≥30mm;
3.Retaining fiber length:≥1.6m; 8
4.Applicable temperature range: 40℃ ~+65℃;
5.All dimensions are in millimeters;
6.The OPGW Al Tube outer-diameter: 8.00mm;
7.Version numbers may be supplemented to our products' models.
206
10 Joint Box Cover Al-alloy 1
9 "S" Tighten Steel Galv. Steel 1
Front and Back Clips outside the Box
8 Al-alloy 1
(including optical cable filling piece)
7 Joint Box Body's Seal Ring Rubber 1
6 Joint Box Body Die-casting Al-alloy 1 General Tolerance Joint Box for
5 Adapter Al-alloy 2-6 <=30 ±1.5mm ANGLE: OPGW-OFC
中天
4 Tray Sheet Tighten Tray Support Steel 1 >30 ±5% ± on Tower 中天科技
3 Fiber Coiling Sheet Cover Plastic 1 Weight ±15% TYPE:PTKO11T-24D Brand JD-OpfitTM
2 Fiber Coiling Sheet Plastic 1-5 Drawing Victor 2020-10-24 Mass Scale NTS
Jiangsu Zhongtian
1 Top Lock Ribbon Stainless Steel 1 Checked FQ.Xu 2020-10-24
Technology Co., Ltd. JSF-6008 REV A
Item Description Material QTY Approved Felix 2020-10-24
