Outdoor Directional Tri-band Antenna
ODI3-065R18J-GQ
XXX Pol, 65°Horizontal Beamwidth
1710-2690/1710-2690/1710-2690MHz
18.5/18.5/18.5dBi, E-Tilt: 0-10/0-10/0-10
Integrated RCU
Electrical Specifications
Y1 1710-2690, Y2 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 17.5 17.8 18.0 18.2 18.5
Horizontal Beamwidth (°) 68 67 65 63 63
Vertical Beamwidth (°) 7.8 7.3 6.9 5.8 5.4
Electrical Downtilt (°) 0-10 / 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥15
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥28
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 250
Impedance (Ω) 50
Lightning Protection Direct Ground
Mechanical Specifications Outline Drawing
Dimensions, HxWxD (mm) / (in) 1420x380x65 / 55.9x15.0x2.6
Shipping Dimensions, HxWxD(mm) / (in) 1830x490x180 / 72.0x19.3x7.1
Net Weight, Antenna (kg) / (Ib) 19.3 / 42.5
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 27.3 / 60.2
Connector Type 6 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
810 / 56 / 880
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard
RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
100x53x26 / 3.9x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.16 / 0.35
©Comba Telecom. All rights reserved
1/2
Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements.
DS-Control:2-0-0 / 1117
Outdoor Directional Tri-band Antenna
ODI3-065R18J-GQ
XXX Pol, 65°Horizontal Beamwidth
1710-2690/1710-2690/1710-2690MHz
18.5/18.5/18.5dBi, E-Tilt: 0-10/0-10/0-10
Integrated RCU
Electrical Specifications BASTA Standard**
Y1 1710-2690, Y2 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 17.3±0.4 17.6±0.4 17.8±0.5 18.0±0.7 18.3±0.5
Min Tilt 17.5 17.8 18.0 18.2 18.5
Gain (dBi)
Mid Tilt 17.4 17.8 17.9 18.1 18.3
Max Tilt 17.0 17.2 17.5 17.8 18.0
Horizontal Beamwidth (°) 68±4 67±3 65±2 63±4 63±4
Vertical Beamwidth (°) 7.8±0.5 7.3±0.5 6.9±0.7 5.8±0.5 5.4±0.3
Electrical Downtilt Deviation (°) ≤0.6 ≤0.6 ≤0.6 ≤0.8 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥18 ≥19 ≥17 ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥18 ≥17 ≥17 ≥15
Front-To-Back Ratio, 180°30° (dB) ≥28 ≥28 ≥27 ≥26 ≥26
Cross-polar Discrimination@0° (dB) ≥29 ≥29 ≥28 ≥22 ≥21
Cross-polar Discrimination over Sector (dB) ≥16 ≥15 ≥11 ≥10 ≥8
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
Connector Position Configuration Types
380
65
Connector Labeling***
Connect Code Frequency range Array
Y1 1710-2690 r
Y2 1710-2690 c
Y3 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array
Accessories
Model Quantity Description
00-ZJ10(16) 1 Mounting Kit, 0-16°tilt.
iRCU-302 1 Integrated RET Controller
Optional Products (order separately)
Model Quantity Description
PCU-H002 1 Portable Control Unit
©Comba Telecom. All rights reserved
2/2
Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements.
DS-Control:2-0-0 / 1117
