Scribd
Upload
137 views1 page

Rcu 1

1. The document is a diagram of an RCU panel that controls various systems in a room through three relays including an entrance light, power supply, and AC unit. 2. Relay 1 controls an entrance light that turns on when the door opens and remains on for 15 seconds after closing. 3. Relay 2 controls the room's power supply, turning it off when unoccupied and on during occupied periods. 4. Relay 3 controls an AC unit, turning it on when the door opens and keeping it on for 3 minutes after closing.

Uploaded by

Đặng Xuân Việt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
137 views1 page

Rcu 1

1. The document is a diagram of an RCU panel that controls various systems in a room through three relays including an entrance light, power supply, and AC unit. 2. Relay 1 controls an entrance light that turns on when the door opens and remains on for 15 seconds after closing. 3. Relay 2 controls the room's power supply, turning it off when unoccupied and on during occupied periods. 4. Relay 3 controls an AC unit, turning it on when the door opens and keeping it on for 3 minutes after closing.

Uploaded by

Đặng Xuân Việt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1C X 1.

5 mm2 cable

RCU PANEL DB PANEL


L N

CB-1P-6A
L1 L
N N

N L
RELAY 1 - Entrance Light:
- Door OPEN -> Entrance Light ON
- Some One keep the Door OPEN -> Entrance Light still ON

PS567
+V -V - Door CLOSED -> Entrance Light still ON After 15 seconds (Ajustable) then OFF

(DR-30-12)
12VDC GND

RELAY 2 - Power Supply for this room:


GND

12VDC
SW3
- Unoccupied Status -> OFF
7 RELAY 1 5 11
OUT1 8 1 12 GFD1 LAMP
7 RELAY 2 5 13 CONTACTOR
- Occupied And Occupancy evaluation period -> ON
OUT2 8 1 14 C
15 1
R2 - NO
OUT3 16
2 CN32 - INDOOR UNIT
7 RELAY 3 5 17
OUT4 8 1 18 3
19 Spare
OUT5 20

1C X 1.5 mm2 cable


OUT6

OUT7

OUT8
RELAY 3 - AC Unit Control:
- Door OPEN -> Relay ON
GND

X10
GND
1(GND)
12VDC 2(12VDC) 12VDC
- Door CLOSED -> Relay still ON After 3 Minute (Ajustable) then OFF
3 MOTION SENSOR
IN1 4
5
IN2 6 DOOR CONTACT - D1
7
IN3 8 (SPARE)
IN4 1C X 1.0 mm2 cable

IN5

IN6

IN7

IN8

RCU DIAGRAM

You might also like