Catalogue

Wiring
Accessories
Our stylish range of wiring accessories covers
sockets & switches for any application, as well
as our range of popular junction boxes & ceiling
accessories.
Sollysta Sollysta Sollysta Sollysta
White Moulded For Specific Equipment Part M Grid
Page 14 Page 27 Page 26 Page 23

Sollysta Decorative Sollysta Decorative

Flat Plate Options Raised Plate Options
Page 28 Page 28

Sollysta Decorative Sollysta Decorative Sollysta Decorative Sollysta Decorative

Brushed Steel Black Nickel Polished Steel Grid
Page 28 Page 28 Page 28 Page 46

Sollysta Metalclad
Grey
Page 48

Sollysta IP66 Sollysta IP66

Sockets Switches
Page 54 Page 54
Sollysta
Wiring Accessories
Sollysta offers a complete range of wiring solutions for any application with our White
Moulded, Decorative, Grid, IP66 and Metaclad ranges.

Specifically designed to inspire confidence, the modern design combines stylish

aesthetics and quality without compromising on functionality, reliability or safety.

All of the hallmark features run consistently throughout the range, including the unique
neutral loop terminal on the switch and the patented three pin shutter mechanism
on the sockets for additional safety. Moulded cable lead-ins, captive and backed off
terminal screws, wire end stops and in-line terminals have all been designed to ease
installation, saving time on site.
 Sollysta Neutral
Loop Terminal
For many years domestic lighting
circuits have been connected
using the three plate method where
the loop terminal is at the ceiling rose.

Today, it is increasingly likely that

there is a decorative light fitting or
even downlighters fitted in place of a
standard pendant. These fittings are
rarely provided with a neutral loop
terminal.

It has also become popular to make

the loop connection at the switch. This
has the advantage of the connections
being accessible and at a more
convenient working height.

However, this leaves the problem of

terminating the neutral conductor.

One solution is to connect the neutral

to a connector block inside the wall
box, which takes up extra space.

Our solution is the Sollysta light switch

which has a unique neutral loop
terminal, built in.

L N L N L N

LOOP LOOP LOOP

As can be seen from the diagram the neutrals are looped through the
switches with a single line and neutral to each light fitting.
One of the fundamental requirements of the BS 7671 Wiring
Regulations is to provide basic protection against electric shock.

Socket outlets have apertures for plug pins Sollysta sockets have a unique patented
and therefore will have a shutter mechanism shutter system that not only requires
that prevents access to live parts unless the earth pin to be inserted first, but the
the earth pin is also present and has been simultaneous insertion of the live and
inserted first. This however can be either neutral pins as well, before the shutter
intentionally or inadvertently defeated mechanism is activated.
by inserting something into the earth pin
aperture. This enhances safety by making it difficult
to defeat the mechanism and therefore
reducing the risk of electric shock.

Unique
Safety Shutters
Sollysta
Wiring Accessories
In addition to the aesthetics for the home owner and
specifier, Sollysta has been designed to make the
installation easier for the installer. Terminals designed to
face in the same direction with lead-ins for wiring, backed
out screws held captive to prevent loss, wire end stops
and clear identification all help make the wiring and cabling
much easier, helping to save time on site.

01
Terminals
The terminals all face in the same direction, removing the need to
rotate the product during installation.
02 03
Terminal Screws Lead-ins
Terminal screws are supplied in the backed out position to Moulded lead-ins help to guide the driver blade to the
save installation time and are also held captive within the screw head.
moulding so they won’t be lost.

04 05
Wire End Stops Projection
A positive wire end stop provides added security of The range has been designed to offer the shallowest
connection. projection possible in the back box, maximising space for
cabling.
Maintenance Free
Junction Box
See page 55

The Maintenance Free Junction BS 7671 (Wiring Regulations) recognises equipment

complying with an appropriate British Standard without
Box provides a secure and further qualification. Therefore, a junction box marked
maintenance free means of is identified as a maintenance free accessory, which does
not require further inspection, testing or maintenance after
connecting fixed wiring in any installation in a circuit.
indoor application, whether it
The terminals accept and secure solid, stranded or
be under floor applications, flexible conductors from 0.5mm² to 4mm². Twin and CPC
between ground and first floor and flexible cords can all be mixed. You then secure the
cage clamp terminal using a screwdriver or finger to push
in houses, or where the jointing down on the push button.
of cables is used to aid rewiring.
The Maintenance Free junction box is ideal for use in
residential and commercial buildings, refurbishments and
re-wires, power and lighting circuits and circuits wired in
sheathed cables.

The Maintenance Free junction box is unrivalled in

today’s market. No other junction box provides as many
features that allow contractors to comply with the latest
wiring regulations.

01 02 03
Screwless Terminations Cable clamps Breakout
Tests on these terminals include Cable clamps prevent The simple breakouts on the
long-term vibration, shock test, strain on terminations and base and lid allow you to select
long term connection test, pull prevent exposed unsheathed your cable entry points.
out, voltage drop, temperature conductors.
rise and exposure to corrosive
atmospheres
 Recognising that junction
boxes are used to supply the
connection between fixed wiring
and downlighters, we developed
a junction box that will help
contractors meet the needs of
the regulations.

Downlighter
Junction Box
See page 55
The J501 is torpedo shaped to fit through a 58mm diameter hole in the
ceiling. All the cables are securely clamped and they exit from either
end of the junction box. This is in contrast to other junction boxes
where the cables are generally not clamped and often exit at different
angles, making it hard to push or pull them through the hole without
risking damage or loosening the connections.

A loose or disconnected cable is a hidden danger with junction boxes.

With an increasing drive for safety, such products have come under
close inspection.

Wiring is fast and simple. The J501 fits comfortably in the hand and
the cables can be clamped for easier connection. Cabling space is
maximised with all the terminals arranged on one side and the upper
wall on the lid hinges open 360º for unrestricted access.

For wiring, the three plate terminal style in the box is logical and easy
to use and separate terminals for flexible cords and twin and CPC
cables help prevent damage to smaller flexible conductors.

During installation all the cables are securely clamped, so there is

no strain placed on the terminal connections and no risk of exposed
unsheathed conductors. The cable clamps can be reversed to allow
either single or double cable entry, which allows up to four flat and one
flexible cable to be terminated.
 Safety Pendants &
Lampholders
See page 56
Our philosophy is to provide all of our
pendants and lampholders with a safety
J-slot mechanism which automatically

04 disconnects power at the contacts when

the lamp is removed.

03
This prevents electric shock due to
accidental touching of the contacts when
changing or installing lamps.

02
01 This applies to

Safety Bayonet Cap Cord Grip Lampholders

Safety Straight Batten Lampholders

Safety Access Batten Lampholders

Safety Pendant Sets with Access Ceiling Rose

01 Lampholder & Skirt

02 Ceiling Rose Cover
03 Terminal Safety Cover
04 Terminal Plate

Safety Terminal Cover clips onto Terminal Plate

enclosing live parts.
 Safety Pendant
Additional safety can be achieved with our
terminal cover which provides protection against
accidental contact with electrical connections.

Safety is ensured with the clipable cover which

shrouds all electrical connections whilst allowing
& Batten
Lampholder
removal of the ceiling rose cover for decorating
or maintenance.

with Terminal
Safety Cover

Safety Lampholders Complete with Safety Covers

Pendant Set 6” with Safety Cover

Batten Lampholder with Safety Cover
 Wiring
Accessories
Our expansive range of Sollysta Wiring Accessories have
been designed from the beginning to be installer friendly,
tactile & safe.

Connect cables and install lamps securely with our Ceiling

Accessories and Junction Boxes.

12
05 Page

Sollysta

White Moulded 14

Decorative 28

Metalclad 48

IP66 54

Junction Boxes

Maintenance Free Junction Boxes 55

Downlighter Junction Boxes 55

Traditional Junction Boxes 55

Ceiling Accessories

Safety Lampholders 56

Safety Pendants 56

Technical Pages 58

Accessories
Wiring

13
 White Moulded
Wall Switches, Intermediate Switches, Push Switches

Wall Switches

Characteristics:
- Unique patented loop terminal allows neutral looping at the switch.
- Complies with BS EN 60669-1, a.c only.
- ‘X‘ rated - No need to derate for fluorescent loads.
- Clear terminal markings: 1-way L1, 2-way L2
- Capacity of each terminal - 2 x 4.0mm² conductors.
- For mounting boxes see selection chart on page 58.
- For multigang switches use of a 25mm mounting box will provide increased wiring space.
- Supplied with M3.5 x 20mm long fixing screws and screw covers.

WMPS11 Description Cat ref.

10AX Wall Switches
1 Gang 1 Way WMPS11
1 Gang 1 Way Printed 'Fan' WMPS11/FAN
1 Gang 2 Way WMPS12
2 Gang 2 Way WMPS22
3 Gang 2 Way WMPS32
4 Gang 2 Way WMPS42
6 Gang 2 Way WMPS62
1 Gang 2 Way Wide Rocker WMPS12W
2 Gang 2 Way Wide Rocker WMPS22W

Intermediate Switches

Characteristics:
- Complies with BS EN 60669-1, a.c only.
- ‘X‘ rated - No need to derate for fluorescent loads.
- Clear terminal markings.
- Capacity of each terminal - 2 x 4.0mm² conductors.
- For mounting boxes see selection chart on page 58.
- For multigang switches use of a 25mm mounting box will provide increased wiring space.
- Supplied with M3.5 x 20mm long fixing screws and screw covers.

Description Cat ref.

WMPS16
Intermediate Switch WMPS16

Push Switches

Characteristics:
- Unique patented loop terminal allows neutral looping at the switch.
- Complies with BS EN 60669-1, a.c only.
- ‘X‘ rated - No need to derate for fluorescent loads.
- Clear terminal markings: 1-way L1, 2-way L2
- Capacity of each terminal - 2 x 4.0mm² conductors.
- For mounting boxes see selection chart on page 58.
- For multigang switches use of a 25mm mounting box will provide increased wiring space.
- Supplied with M3.5 x 20mm long fixing screws and screw covers.

WMPS12W Description Cat ref.

Push Switches
Retractive Switch WMPS12R
With Bell Symbol WMPS12RB
With Wide Rocker WMPS12RW

Isolator Switches

Characteristics:
- Complies with BS EN 60669-2-4
- Rated conditional short circuit current (Inc) 1500A tested with Hager MTN110 6kA B curve MCB.
- Capacity of each terminal 2 x 4.0mm² conductors.
- For mounting boxes see selection chart on page 58.
- Supplied with M3.5 x 20mm long fixing screws and screw covers.

Description Cat ref.

3 Pole Isolator Switches
Accessories

Isolator Switch WMPS3PI

Wiring

WMPS3PIF Isolator Switch with Fan Symbol WMPS3PIF

14 Data is subject to errors and technical modifications.  New.

 White Moulded
Dimmers, Isolator Switches

Dimmer Plate Kits

Characteristics:
- Suitable for most D shaft push and rotary dimmer switch modules
- Maintains Sollysta aesthetic for a wide range of manufacturers switches
- Plate and matching button(s) supplied
- Supplied with M3.5 x 30mm long fixing screws and screw covers.

Description Cat ref.

1 Gang Rotary Dimmer Switch Plate Kit WMDRP1KIT
2 Gang Rotary Dimmer Switch Plate Kit WMDRP2KIT
WMDRP1KIT
3 Gang Rotary Dimmer Switch Plate Kit WMDRP3KIT
(Each kit comes with matching button(s))
4 Gang Rotary Dimmer Switch Plate Kit WMDRP4KIT

Rotary Push Button Dimmer Switches

Characteristics:
- Quick press for on/off with rotary dimming control.
- 1 or 2 way switching.
- Supplied with M3.5 x 30mm long fixing screws and screw covers.
- Complies with BS EN 60669-2-1 (excluding clause 26 EMC requirements).
Mains Halogen
- Suitable for mains halogen lamps without the need for derating.
- Not suitable for fluorescent, LED or inductive loads.
LED
- Leading edge functionality compatible with many dimmable LED lamps & fittings
- Thermal safety fuse for short circuit protection WMDR1/400R

Description Cat ref.

Rotary Push Button Dimmer Switches (LED)
1 Gang 400W WMDR1L
2 Gang 250W WMDR2L

Rotary Push Button Dimmer Switches (Mains Halogen)

1 Gang 400W WMDR1/400R
2 Gang 250W WMDR2/250R

Push Button Dimmer Switches

Characteristics:
- Stylish flush button with quick press for on/off.
- Hold button down to dim or brighten light level.
- Leading edge.
- Soft start feature prolongs lamp life.
- Suitable for dimming mains and dimmable transformer extra low voltage lamps.
- Complies with BS EN 60669-2-1 (including BS EN 55015).
- Automatic switch off in event of transformer instability, protects the dimmer and the transformer.
- Supplied with M3.5 x 30mm long fixing screws and screw covers.

WMDS1
Description Cat ref.
Push Button Dimmer Switches
1 Gang 400W WMDS1
2 Gang 250W WMDS2
3 Gang 250W WMDS3
4 Gang 250W WMDS4

Resistive Load for LED Applications WMRESLOAD

Accessories
Wiring

Data is subject to errors and technical modifications.  New. 15

 White Moulded
Socket Outlets, Cooker Control Units, Outlet Plates

Switched & Unswitched Socket Outlets

Characteristics:
- Unique patented three part safety shutter.
- Complies with BS 1363-2, a.c only.
- Double pole switching mechanism on switched sockets.
- Twin socket comes with twin earth as standard.
WMSS82 - All terminal screws grouped in-line and upward facing for ease of installation.
- Clear printed and engraved terminal markings.
- Capacity of each terminal: 3 x 4mm2 conductors switched & unswitched (for other sized conductors see terminal capacities
on page 59).
- WMSS82USB(S) - Warning: To avoid possible damage to the product or spurious insulation readings, please disconnect
the product before carrying out insulation resistance testing.
- WMSS82USB(S) USB output: 5V d.c. 2.4A total max.
- For mounting boxes see selection chart on page 58.
- Supplied with M3.5 x 30mm long fixing screws and screw covers.

Description Cat ref.

Switched Socket Outlets
13A 1 Gang Double Pole WMSS81
13A 2 Gang Double Pole Dual Earth WMSS82
WMS51
13A 2 Gang Double Pole Dual Earth & Two USB Ports WMSS82USB
13A 2 Gang Double Pole Dual Earth & Two USB Ports & 10mm Spacer WMSS82USBS
10mm Spacer for 2 Gang Sockets WMUSBS
13A 2 Gang Double Pole Dual Earth Outboard Rockers WMSS82O
13A 1 Gang Double Pole with LED Indicator WMSS81N
13A 2 Gang Double Pole Dual Earth with LED Indicator WMSS82N
13A 2 Gang Double Pole Dual Earth Outboard Rockers & LED Indicator WMSS82ON
WMSS82USB
15A 1 Gang WMSS115

Unswitched Socket Outlets

13A 1 Gang WMS81
13A 2 Gang Dual Earth WMS82
5A 1 Gang WMS51

Cooker Control Unit

Characteristics:
- Complies with BS 4177.
- Switch and socket are double pole.
- Twin earth as standard.
- Main switch is suitable for isolation.
- All terminals are upward facing for ease of installation.
WMCC50
- Clearly printed terminal marking.
- Capacity of terminals: 2 x 6.0mm2, 1 x 16.0mm­2.
- For mounting boxes see selection chart on page 58.
- Supplied with M3.5 x 30mm long fixing screws and screw covers.

Description Cat ref.

45A Cooker Control Unit WMCC50
45A Cooker Control Unit with LED Indicator WMCC50N
WMCC50N

Outlet Plates

Characteristics:
- Complies with BS 5733
- Terminal capacity: 20A 2 x 6.0mm­², 45A 2 x 10.0mm² conductors
- 20A plate features 2 separate terminals for each of Line, Neutral and Earth so flexible and fixed wiring do not occupy the
same terminal.
- Single screw fast fix cable clamp.
- Supplied with M3.5 x 30mm long fixing screws and screw covers.
- 45A features large open brass terminals for ease of installation.
- Protective red washer must be used under cable clamp to prevent damage to cable.

WMP2FO
Description Cat ref.
Outlet Plates
Accessories

20A Flex Outlet Plate WMP2FO

45A Cooker Cable Outlet with Terminals WMP50FO
Wiring

16 Data is subject to errors and technical modifications.  New.

 White Moulded
Fused Connection Units

Switched & Unswitched Fused Connection Units (13A)

Characteristics:
- Complies with BS 1363-4.
- Single screw fast fix cable clamp, accommodates up to 1.5mm² flexible cord.
- All terminals are upward facing with clearly printed terminal markings for ease of installation.
- Capacity of each terminal 2 x 6.0mm2­ conductors.
- Supplied with M3.5 x 30mm long fixing screws and screw covers.
- For mounting boxes see selection chart on page 58.
- We also offer a bespoke printing service for your individual requirements. Please contact our Estimation Team on
01952 675594 for further details.

WMSSU83
Description Cat ref.
13A Switched Fused Connection Units
FCU WMSSU83
FCU With Flex Outlet WMSSU83FO
FCU With LED Indicator WMSSU83N
FCU With LED Indicator & Flex Outlet WMSSU83FON
FCU With 3A Fuse WMSSU83/3A

13A Unswitched Fused Connection Units

FCU WMSU83
With Flex Outlet WMSU83FO
WMSSU83N

13A Unswitched Fused Connection Units - Printed Text

Printed - ‘Plinth Heater’ WMSU83PH
Printed - ‘Storage Heater’ WMSU83SH

13A Switched Fused Connection Units - Printed Text

Printed 'Boiler' WMSSU83/BO
Printed 'Central Heating' WMSSU83/CTLHTG
Printed 'Dishwasher' WMSSU83/DW
Printed 'Extract Fan' WMSSU83/EF
Printed 'Fan' WMSSU83/FAN
Printed 'Fridge Freezer' WMSSU83/FF
Printed 'Freezer' WMSSU83/FRE
Printed 'Fridge' WMSSU83/FRI
Printed 'Heating' WMSSU83/HTG
Printed 'Heater' WMSSU83/HTR
Printed 'Shower Pump' WMSSU83/SHWRPUMP
Printed 'Socket Below' WMSSU83/SKTBELOW
Printed 'Tumble Dryer' WMSSU83/TD
Printed 'Washing Machine' WMSSU83/WM

13A Switched Fused Connection Units with Flex Outlet - Printed Text
Printed 'Boiler' WMSSU83FO/BO
Printed 'Dishwasher' WMSSU83FO/DW
Printed 'Extractor Fan' WMSSU83FO/EF
Printed 'Fridge Freezer' WMSSU83FO/FF
Printed 'Freezer' WMSSU83FO/FRE
Printed 'Fridge' WMSSU83FO/FRI
Printed 'Heating' WMSSU83FO/HTG
Printed 'Heater' WMSSU83FO/HTR
Printed 'Tumble Dryer' WMSSU83FO/TD
Printed 'Washing Machine' WMSSU83FO/WM
Accessories
Wiring

Continued overleaf

Data is subject to errors and technical modifications.  New. 17

 White Moulded
Fused connection Units, Double Pole Switches

Unswitched & Switched Fused Connection Units (13A) - Continued

Description Cat ref.

13A Switched Fused Connection Units with LED Indicator - Printed Text
Printed 'Boiler' WMSSU83N/BO
Printed 'Dishwasher' WMSSU83N/DW
Printed 'Extractor Fan' WMSSU83N/EF
Printed 'Fan' WMSSU83N/FAN
Printed 'Freezer' WMSSU83N/FRE
Printed 'Fridge' WMSSU83N/FRI
Printed 'Hob' WMSSU83N/HB
Printed 'Heating' WMSSU83N/HTG
Printed 'Tumble Dryer' WMSSU83N/TD
Printed 'Washing Machine' WMSSU83N/WM

13A Switched Fused Connection Units with LED Indicator & Flex Outlet - Printed Text
Printed 'Boiler' WMSSU83FON/BO
Printed 'Dishwasher' WMSSU83FON/DW
Printed 'Extractor Fan' WMSSU83FON/EF
Printed 'Fan' WMSSU83FON/FAN
Printed 'Freezer' WMSSU83FON/FRE
Printed 'Fridge' WMSSU83FON/FRI
Printed 'Hob' WMSSU83FON/HB
Printed 'Heating' WMSSU83FON/HTG
Printed 'Tumble Dryer' WMSSU83FON/TD
Printed 'Washing Machine' WMSSU83FON/WM

Double Pole Switches (20A)

Characteristics:
- Complies with BS EN 60669-1, a.c. only.
- Single screw fast fix cable clamp, accommodates up to 1.5mm² flexible cord.
- All terminals are upward facing with clearly printed terminal markings for ease of installation.
- Capacity of each terminal 2 x 6.0mm² conductors.
- For mounting boxes see selection chart on page 58.
- Supplied with M3.5 x 30mm long fixing screws and screw covers.
- We also offer a bespoke printing service for your individual requirements. Please contact our Estimation Team on
01952 675594 for further details.

WMDP84FON
Description Cat ref.
20A Double Pole Switches
20A Double Pole Switch WMDP84
With Flex Outlet WMDP84FO
With LED Indicator WMDP84N
With LED Indicator & Flex Outlet WMDP84FON

20A Double Pole Switched - Printed Text

Printed 'Dishwasher' WMDP84/DW
Printed 'Freezer' WMDP84/FRE
Printed 'Fridge' WMDP84/FRI
Printed 'Tumble Dryer' WMDP84/TD
Printed 'Washing Machine' WMDP84/WM

20A Double Pole Switches with Flex Outlet - Printed Text

Printed 'Freezer' WMDP84FO/FRE
Printed 'Fridge' WMDP84FO/FRI
Accessories
Wiring

18 Data is subject to errors and technical modifications.  New.

 White Moulded
Double Pole Switches

Double Pole Switches (20A) (Continued)

20A Double Pole Switches with LED Indicator & Flex Outlet - Printed Text
Printed 'Dishwasher' WMDP84FON/DW
Printed 'Fan' WMDP84FON/FAN
Printed 'Freezer' WMDP84FON/FRE
Printed 'Fridge' WMDP84FON/FRI
Printed 'Tumble Dryer' WMDP84FON/TD
Printed 'Washing Machine' WMDP84FON/WM
Printed 'Waterheater' WMDP85FON WMDP85N

20A Double Pole Switches with LED Indicator - Printed Text

Printed 'Dishwasher' WMDP84N/DW
Printed 'Fan' WMDP84N/FAN
Printed 'Freezer' WMDP84N/FRE
Printed 'Fridge' WMDP84N/FRI
Printed 'Tumble Dryer' WMDP84N/TD
Printed 'Washing Machine' WMDP84N/WM
Printed 'Waterheater' WMDP85N

Double Pole Switches (50A)

Characteristics:
- Complies with BS EN 60669-2-4.
- Rated conditional short circuit current (Inc) 1500A tested with Hager MTN150 6kA B curve MCB.
- All terminal screws upward facing for ease of installation.
- Clearly printed terminal marking.
- Capacity of each terminal: 2 x 6mm2, 1 x 10mm2.
- For mounting boxes see selection chart on page 58.
- Supplied with M3.5 x 30mm long fixing screws and screw covers.
- We also offer a bespoke printing service for your individual requirements. Please contact our Estimation Team on
01952 675594 for further details.

Description Cat ref.

50A Double Pole Switches WMDP50N
With LED Indicator (1 Gang) WMDP50N
Vertical with LED Indicator (2 Gang) WMDP50VN

50A Double Pole Switches with LED Indicator - Printed Text

Printed 'Cooker' WMDP50N/CK
Printed 'Hob' WMDP50N/HB
Printed 'Oven' WMDP50N/OV
Printed 'Shower' WMDP50N/SH

50A Double Pole Vertical Switches with LED Indicator - Printed Text
Printed 'Cooker' (2 Gang) WMDP50VN/CK
Printed 'Hob' (2 Gang) WMDP50VN/HB
Printed 'Oven' (2 Gang) WMDP50VN/OV
Accessories
Wiring

Data is subject to errors and technical modifications.  New. 19

 White Moulded
Shaver Socket, Telephone & Data, TV & Satellite, Hotel Card Switch

Shaver Socket

Characteristics:
- Complies with BS EN 61558-2-5.
- Shaver socket terminal capacity (to BS6004) 3 x 1.0mm², 2 x 1.5mm², 1 x 2.5mm²
- Designed for use in bathrooms and shower rooms and incorporates a double wound transformer for an earth free supply.
- Designed to supply electric shavers rated 50 VA or less.
- Input 230V a.c. output dual voltage 230V a.c. and 115V a.c. outlets. Rating 20VA on either voltage.
- Primary circuit protected by a self resetting thermal overload device.
- Insertion of shaver plug automatically switches on the transformer.
- Supplied with M3.5 x 30mm long fixing screws and screw covers.

WMSO100
Description Cat ref.
Shaver Socket 115/230 Volt WMSO100

Telephone & Data

Characteristics:
- BT sockets comply with BS 6312-2.
- Supplied with fitted cable tie.
- Quick connection with insulation displacement terminals.
- Clearly printed terminal marking.
- Supplied with M3.5 x 20mm long fixing screws and screw covers.

Description Cat ref.

Telephone & Data
WMBTM BT Master Telephone Outlet WMBTM
BT Secondary Telephone Outlet WMBTS
RJ11 Socket WMRJ11
RJ45 Socket WMRJ45
IDC Tools (bag of 10) IDCTOOL

TV & Satellite

Characteristics:
- TV outlets comply with BS 3041.
- Satellite outlets comply with BS EN 50083-2.
- Fully screened.
- DAB compatible.
- Supplied with M3.5 x 20mm fixing screws.

Description Cat ref.

TV & Satellite
WMQX Single F Type Satellite Outlet Screened WMSAT
Single Co-Ax TV Socket Outlet Male WMTVM
Single Co-Ax TV Socket Outlet Female WMTVF
Double TV & FM/DAB Co-Ax Socket Outlet WMDX
Triplexer TV, FM/DAB & Satellite Outlet WMTX
Quadplexer TV, FM/DAB, Satellite 1 & Satellite 2 Outlet WMQX
Accessories
Wiring

20 Data is subject to errors and technical modifications.  New.

 White Moulded
Euro Plates, Euro Modules

Euro Style Accommodation Plates

Characteristics:
- Carrier plates facilitate installation of industry standard modules.
- Easy to configure for all applications.
- Robust retention of modules in operation.
- Quick release of modules for maintenance.

Description Cat ref.

Euro Style Accommodation Plates
1 Module WMP1EU
WMP2EU
2 Modules WMP2EU
4 Modules WMP4EU

Euro Style Modules

Characteristics:
- Please note: these euro modules are industry standard units and are not colour matched to Sollysta plates.

Description Mod Width Cat ref. (White) Cat ref. (Black)

Euro Style Modules
BT Telephone Master 1 WMMBTM WMMBTMB
BT Telephone Secondary 1 WMMBTS WMMBTSB
RJ11 - Modem 1 WMMRJ11 WMMRJ11B
RJ45 - Cat 6 UTP 1 WMMRJ45 WMMRJ45B WMMBTM WMMSAT
Phono Plugs - Red/Black - Gold Plated 1 WMMPP -
Speaker Terminal Posts - Gold Plated 1 WMMSP -
Single IEC Female Non Isolated 1 WMMTVF WMMTVFB
Single IEC Male Non Isolated 1 WMMTVM WMMTVMB
Single Satellite F Connector 1 WMMSAT WMMSATB
Single Blank 1 WMMB WMMBB
PIR Occupancy Sensor 5m 1 WMMPIR05X -
PIR Occupancy Sensor 10m 1 WMMPIR10X -
HDMI 2 WMMHDMI WMMHDMIB
Triplexer - TV, Satellite & FM Radio 2 WMMTX WMMTXB
WMMQXB
Quadplexer - TV, Satellite, FM Radio & Return 2 WMMQX WMMQXB

Accessories
Wiring

Data is subject to errors and technical modifications.  New. 21

 White Moulded
Ceiling Switches

Light Switches

Characteristics:
- Complies with BS EN 60669-1.
- ‘X‘ rated - no need to de-rate for fluorescent loads.
- Earth terminal in base.
- Switch will operate at up to an angle of 45º.
- Pull cords 1.5m long.
- Capacity of each terminal: 2 x 1.5mm² conductors.

Description Cat ref.

WMCS11 6A Ceiling Switch

1 Way WMCS11
2 Way WMCS12

Fan Isolator Switches

Characteristics:
- Complies with BS EN 60669-2-4.
- Terminal capacity: 3 x 1.5mm².
- Supplied with M3.5 x 30mm long fixing screws and screw covers.

Description Cat ref.

10A 3 Pole Ceiling Switch
Printed with Fan Symbol & 'Isolator' WMCS3PIF

WMCS3PIF Printed 'Isolator' WMCS3PI

Printed with Fan Symbol WMCS3PF

Shower Switches

Characteristics:
- Complies with BS EN 60669-2-4.
- Rated conditional short circuit current (Inc) 1500A tested with Hager MTN150 6kA B Curve MCB.
- Suitable for use with showers up to 11.5kW.
- Position of the contacts shown by flag indicator.
- Supplied with M3.5 x 30mm fixing screws.
- Capacity of each terminal: 1 x 16mm² conductors.

Description Cat ref.

WMCS50N 50A 2 Pole Isolating with LED Indicator WMCS50N

Accessories for Ceiling Switches

Description Cat ref.

Single Spare Pull Cord PULLCORD

Accessories
Wiring

22 Data is subject to errors and technical modifications.  New.

 White Moulded
Grid Plates, Grid Switches

Grid Plates

Description Cat ref.

Grid Plates
1 Gang WMGP1
2 Gang WMGP2
3 Gang WMGP3
4 Gang WMGP4
6 (2 x 3) Gang WMGP6
8 (2 x 4) Gang Grid Plate WMGP8 WMGP2
1 Gang Grid Plate Grey WMGP1G
2 Gang Grid Plate Grey WMGP2G
3 Gang Grid Plate Grey WMGP3G
4 Gang Grid Plate Grey WMGP4G
6 (2 x 3) Gang Grid Plate Grey WMGP6G
8 (2 x 4) Gang Grid Plate Grey WMGP8G

Grid Frames

Description Cat ref.

1 Gang WMGF1
2 Gang WMGF2
WMGF34
3/4 Gang WMGF34

Grid Switches

Characteristics:
- Complies with BS EN 606691-1 switches, BS 5733 fuse carrier.
- Shallowest switch modules which clip in from the front for ease of installation and maintenance.
- Terminal screw can be accessed with modules clipped into frames.
- Frames locate to finished wall level.
- Frames clip together to ease alignment for 6 gang and 8 gang applications.
- We also offer a bespoke printing service for your individual requirements. Please contact our Sales Service Centre on
01952 675612 for further details.

Description Cat ref. White Insert Cat ref. Black Insert

WMGKS
Grid Switches
Blank Module WMGB1 -
20AX 2 Way Single Pole Switch WMGS12 -
20A Intermediate Switch WMGS16 -
20A 2 Way Retractive Switch WMGS22R -
20A 1 Way Double Pole Switch WMGSDP2 -
20A 1 Way Double Pole Switch with LED Indicator WMGSDP2N -
20A Double Pole Key Switch WMGKS -
20A Double Pole Key Switch Printed ‘Emergency Lighting Test’ WMGKS/EL -
13A Fuse Carrier WMGFU13 -
Dimmer Slave Switch WMGSD1S WMGSD1SB
WMGB1
Dimmer Switch Leading Edge WMGSD1L WMGSD1LB
Dimmer Switch Trailing Edge WMGSD1T WMGSD1TB
Red Indicator WMINDRED WMINDREDB
2 Way & Centre Off Latching Switch WMGS13L WMGS13LB
2 Way & Centre Off Latching Switch Red Rocker WMGS13LR -
2 Way & Centre Off Retractive Switch WMGS13R WMGS13RB
2 Way & Centre Off Retractive Switch Red Rocker WMGS13RR -
13A Fused Connection Unit Unswitched with LED Indicator WMGSU83N -

WMINDRED
Accessories
Wiring

Data is subject to errors and technical modifications.  New. 23

 White Moulded
Grid Switches

Grid Switches (Continued)

Characteristics:
- Complies with BS EN 606691-1 switches, BS 5733 fuse carrier.
- Shallowest switch modules which clip in from the front for ease of installation and maintenance.
- Terminal screw can be accessed with modules clipped into frames.
- Frames locate to finished wall level.
- Frames clip together to ease alignment for 6 gang and 8 gang applications.
- We also offer a bespoke printing service for your individual requirements. Please contact our Sales Service Centre on
01952 675612 for further details.

Description Cat ref. White Insert Cat ref. Black Insert

WMGSDP2/CHD
20A 1 Way Double Pole Grid Switches - Printed
Printed ‘Boiler’ WMGSDP2/BOI -
Printed 'Cooker Hood' WMGSDP2/CHD WMGSDP2B/CHD
Printed 'Dishwasher' WMGSDP2/DW WMGSDP2B/DW
Printed 'Extract Fan' WMGSDP2/EF WMGSDP2B/EF
Printed 'Fridge Freezer' WMGSDP2/FF WMGSDP2B/FF
Printed 'Freezer' WMGSDP2/FRE WMGSDP2B/FRE
Printed 'Fridge' WMGSDP2/FRI WMGSDP2B/FRI
Printed 'Hob' WMGSDP2/HB WMGSDP2B/HB
Printed 'Heating' WMGSDP2/HTG WMGSDP2B/HTG

WMGSDP2/EF Printed 'Microwave' WMGSDP2/MW WMGSDP2B/MW

Printed 'Micro Wave' WMGSDP2MW2 -
Printed 'Tumble Dryer' WMGSDP2/TD WMGSDP2B/TD
Printed 'Waste Disposal' WMGSDP2/WD WMGSDP2B/WD
Printed 'Washing Machine' WMGSDP2/WM WMGSDP2B/WM
Printed 'Oven' WMGSDP2/OV WMGSDP2B/OV
Printed 'Wine Cooler' WMGSDP2/WC WMGSDP2B/WC
Printed 'Hot Water' WMGSDP2/HW WMGSDP2B/HW
Printed 'Coffee Maker' WMGSDP2/CM WMGSDP2B/CM
Printed 'Hot Drawer' WMGSDP2/HD WMGSDP2B/HD
Printed 'Fan Boost' WMGSDP2/FB WMGSDP2B/FB
Printed ‘Outside Light’ WMGSDP2/OL -
Printed 'Outside Socket' WMGSDP2/OS -
Printed ‘Plinth Heater’ WMGSDP2/PH -

20A 1 Way Double Pole Grid Switches with LED Indicator - Printed
Printed 'Cooker Hood' WMGSDP2N/CHD WMGSDP2NB/CHD
Printed 'Dishwasher' WMGSDP2N/DW WMGSDP2NB/DW
Printed 'Extract Fan' WMGSDP2N/EF WMGSDP2NB/EF
Printed 'Fridge Freezer' WMGSDP2N/FF WMGSDP2NB/FF
Printed 'Freezer' WMGSDP2N/FRE WMGSDP2NB/FRE
Printed 'Fridge' WMGSDP2N/FRI WMGSDP2NB/FRI
Printed 'Hob' WMGSDP2N/HB WMGSDP2NB/HB
Printed 'Heating' WMGSDP2N/HTG WMGSDP2NB/HTG
Printed 'Microwave' WMGSDP2N/MW WMGSDP2NB/MW
Printed 'Tumble Dryer' WMGSDP2N/TD WMGSDP2NB/TD
Printed 'Waste Disposal' WMGSDP2N/WD WMGSDP2NB/WD
Printed 'Washing Machine' WMGSDP2N/WM WMGSDP2NB/WM
Printed 'Oven' WMGSDP2N/OV -
Printed ‘Outside Light’ WMGSDP2N/OL -
Printed 'Outside Socket' WMGSDP2N/OS -
Printed ‘Plinth Heater’ WMGSDP2N/PH -
Accessories
Wiring

24 Data is subject to errors and technical modifications.  New.

 White Moulded
Patress Boxes, Accessories

Blank Plates

Single Blank Plate WMP1

Twin Blank Plate WMP2

WMP1

WMP2

Pattress Boxes

Characteristics:
- Complies with BS EN 60670-1.
- Depth quoted is internal depth.
- Colour and footprint match all Sollysta White Moulded wiring accessories.

Description Cat ref. WMPB2/20

Single 20mm Deep Moulded Box WMPB1/20
Single 28mm Deep Moulded Box WMPB1/28
Single 46mm Deep Moulded Box WMPB1/46
Twin 28mm Deep Moulded Box WMPB2/28
Twin 46mm Deep Moulded Box with Cable Clamps WMPB2/46CC
46mm Deep Moulded Shaver Box WMPB2/46
20mm Single to Twin Converter Frame WMPB2/20
Single 14mm Deep Spacer for Base Flex Outlet WMPB1/BFO

Accessories

Description Cat ref.

Single Spare Pull Cord PULLCORD
Pack of 100 Push Fit Screw Covers SCREWCOVER
IDC Tools (bag of 10) IDCTOOL

PULLCORD

Hotel Key Card Switch

Characteristics:
- Includes indicator light to aid locating which is switched off when the card is inserted.
- Complies with BS EN 60669-1.
- Supplied with M3.5 x 25mm long fixing screws and screw covers.

Description Quantity Cat ref.

Key Tag Switch with Key Card (time delay 60s) 5 XH9001

XH9001
Accessories
Wiring

Data is subject to errors and technical modifications.  New. 25

 Part M
Wiring Accessories

Part M Wiring Accessories

Characteristics:
- Designed to satisfy Buildings Regulations Approved Document M (referred to as Part M)
- All products comply with their relevant British Standards
- Switches have wide rockers and dark face plates for clear visibility and ease of actuation
- Sockets have outboard rockers to ensure correct switching of appliances and dark face plates for ease of identification of
WMSS82OG switch position
- Grid modules can be found on page 23. Euro modules can be found on page 21.

Cat ref.
Description (Grey Faceplate)
Wall Switches
10AX 1 Gang 2 Way Wide Rocker WMPS12WG
10AX 2 Gang 2 Way Wide Rocker WMPS22WG

Intermediate Switch
Wide Rocker WMPS16WG

WMPS12WG Push Switches

Wide Rocker WMPS12RWG
Wide Rocker Printed ‘Fan Boost’ WMPS12RWG/FB

Double Pole Switched Socket Outlets

13A 1 Gang WMSS81G
13A 2 Gang with Outboard Rockers WMSS82OG

Switched Fused Connection Units

13A with LED Indicator WMSSU83NG
13A with LED Indicator Printed 'Extract Hood' WMSSU83NG/EH

Double Pole Switches

20A 1 Gang with LED Indicator WMDP84NG
50A 2 Gang with LED Indicator WMDP50NG
50A 2 Gang with LED Indicator Printed ‘Cooker’ WMDP50NG/CK

Grid Plates
1 Gang Grid Plate WMGP1G
2 Gang Grid Plate WMGP2G
3 Gang Grid Plate WMGP3G
4 Gang Grid Plate WMGP4G
6 Gang Grid Plate (2 x 3) WMGP6G
8 Gang Grid Plate (2 x 4) WMGP8G

Euro Style Accommodation Plates

1 Module WMP1EUG
2 Modules WMP2EUG
4 Modules WMP4EUG
Accessories
Wiring

26 Data is subject to errors and technical modifications.  New.

 Specific Application Equipment
Socket Outlets, Fused Connection Units

Specific Equipment Wiring Accessories

Characteristics:
- Red rockers aid ease of identification for safe switching of specific equipment
- Red face plates ensure products are easy to locate
- A range of printed options is available for specific functions

Cat ref. Cat ref. WMSS82R/CS

(White Faceplate, (Red Faceplate,
Description Red Rocker) Red Rocker)
Double Pole Switched Socket Outlets
13A 1 Gang WMSS81R WMSS81RR
13A 2 Gang WMSS82R WMSS82RR
13A 2 Gang with Outboard Rockers WMSS82OR WMSS82ORR
13A 2 Gang Switched Socket Printed 'Cleaners Socket' WMSS82R/CS -
13A 2 Gang Switched Socket Printed 'UPS Protected' WMSS82R/UPS - WMSS82ORR

Switched Fused Connection Units

13A Fused Connection Unit Switched WMSSU83R -
13A Fused Connection Unit Red Face (White Fuse Cover) WMSU83R -
13A Fused Connection Unit Switched - WMSSU83RR

WMSSU83RR

Accessories
Wiring

Data is subject to errors and technical modifications.  New. 27

 Decorative
Wall Switches

Wall Switches Raised Plate

Characteristics:
- Unique patented LOOP terminal to allow neutral looping at the switch.
- Complies with BS EN 60669-1, a.c only.
- ‘X’ rated - No need to de-rate for fluorescent loads.
- Capacity of each terminal 2 x 4.0mm² conductors.
- For mounting boxes see selection chart on page 58.
- For multi-gang switches, use of a 25mm mounting box will provide increased wiring space.
- Supplied with M3.5 x 20mm long fixing screws.

Description Cat ref. White Insert Cat ref. Black Insert

WRPS12PSB
Raised Plate 10AX 1 Gang 2 Way
Polished Steel WRPS12PSW WRPS12PSB
Brushed Steel WRPS12BSW WRPS12BSB
Black Nickel - WRPS12BNB

Raised Plate 10AX 2 Gang 2 Way

Polished Steel WRPS22PSW WRPS22PSB
Brushed Steel WRPS22BSW WRPS22BSB
Black Nickel - WRPS22BNB

WRPS12BSB Raised Plate 10AX 3 Gang 2 Way

Polished Steel WRPS32PSW WRPS32PSB
Brushed Steel WRPS32BSW WRPS32BSB
Black Nickel - WRPS32BNB

Raised Plate 10AX 4 Gang 2 Way

Polished Steel WRPS42PSW WRPS42PSB
Brushed Steel WRPS42BSW WRPS42BSB
Black Nickel - WRPS42BNB

Raised Plate 10AX 1 Gang 2 Way Wide Rocker

Polished Steel WRPS12WPSW WRPS12WPSB
WRPS12BNB
Brushed Steel WRPS12WBSW WRPS12WBSB
Black Nickel - WRPS12WBNB

Raised Plate 10AX 2 Gang 2 Way Wide Rocker

Polished Steel WRPS22WPSW WRPS22WPSB
Brushed Steel WRPS22WBSW WRPS22WBSB
Black Nickel - WRPS22WBNB

Raised Plate Intermediate Switch

Polished Steel WRPS16PSW WRPS16PSB
Brushed Steel WRPS16BSW WRPS16BSB
Black Nickel - WRPS16BNB
Accessories
Wiring

28 Data is subject to errors and technical modifications.  New.

 Decorative
Wall Switches

Wall Switches Flat Plate

Characteristics:
- Unique patented LOOP terminal to allow neutral looping at the switch.
- Complies with BS EN 60669-1, a.c only.
- ‘X’ rated - No need to de-rate for fluorescent loads.
- Capacity of each terminal 2 x 4.0mm² conductors.
- For mounting boxes see selection chart on page 58.
- For multi-gang switches use of a 25mm mounting box will provide increased wiring space.
- Supplied with M3.5 x 20mm long fixing screws.

Description Cat ref. White Insert Cat ref. Black Insert

WFPS22PSW
Flat Plate 10AX 1 Gang 2 Way
Polished Steel WFPS12PSW WFPS12PSB
Brushed Steel WFPS12BSW WFPS12BSB
Black Nickel - WFPS12BNB

Flat Plate 10AX 2 Gang 2 Way

Polished Steel WFPS22PSW WFPS22PSB
Brushed Steel WFPS22BSW WFPS22BSB
Black Nickel - WFPS22BNB

Flat Plate 10AX 3 Gang 2 Way WFPS22WBSW

Polished Steel WFPS32PSW WFPS32PSB
Brushed Steel WFPS32BSW WFPS32BSB
Black Nickel - WFPS32BNB

Flat Plate 10AX 4 Gang 2 Way

Polished Steel WFPS42PSW WFPS42PSB
Brushed Steel WFPS42BSW WFPS42BSB
Black Nickel - WFPS42BNB

Flat Plate 10AX 1 Gang 2 Way Wide Rocker

Polished Steel WFPS12WPSW WFPS12WPSB WFPS12BNB
Brushed Steel WFPS12WBSW WFPS12WBSB
Black Nickel - WFPS12WBNB

Flat Plate 10AX 2 Gang 2 Way Wide Rocker

Polished Steel WFPS22WPSW WFPS22WPSB
Brushed Steel WFPS22WBSW WFPS22WBSB
Black Nickel - WFPS22WBNB

Flat Plate Intermediate Switch

Polished Steel WFPS16PSW WFPS16PSB
Brushed Steel WFPS16BSW WFPS16BSB
Black Nickel - WFPS16BNB Accessories
Wiring

Data is subject to errors and technical modifications.  New. 29

 Decorative
Dimmers

Dimmer Plate Kits

Characteristics:
- Suitable for most D shaft push and rotary dimmer switch modules
- Maintains Sollysta aesthetic for a wide range of manufacturers switches
- Plate and matching button(s) supplied
- Supplied with M3.5 x 30mm long fixing screws and screw covers.

Cat ref. Cat ref.

Description Flat Plate Raised Plate
1 Gang Dimmer Switch Plate Kit
WFDRP1BSKIT Polished Steel WFDRP1PSKIT WRDRP1PSKIT
Brushed Steel WFDRP1BSKIT WRDRP1BSKIT

2 Gang Dimmer Switch Plate Kit

Polished Steel WFDRP2PSKIT WRDRP2PSKIT
Brushed Steel WFDRP2BSKIT WRDRP2BSKIT

3 Gang Dimmer Switch Plate Kit

Polished Steel WFDRP3PSKIT WRDRP3PSKIT
Brushed Steel WFDRP3BSKIT WRDRP3BSKIT

WFDRP1PSKIT 4 Gang Dimmer Switch Plate Kit

Polished Steel WFDRP4PSKIT WRDRP4PSKIT
Brushed Steel WFDRP4BSKIT WRDRP4BSKIT

WFDRP4BSKIT

Dimmers - Flat & Raised Plate

Characteristics:
- Quick press for ON/OFF, hold button down to dim or brighten light level.
- Leading edge.
- Soft start feature prolongs lamp life.
- Suitable for dimming mains and dimmable transformer extra low voltage lamps.
- Automatic switch off in the case of transformer instability, protects the dimmer and the transformer.
- WR references supplied with M3.5 x 30mm long fixing screws.
- WF references supplied with M3.5 x 20mm long fixing screws.

Cat ref. Cat ref.

WRDS2BN Description Flat Plate Raised Plate
1 Gang Dimmer 400W
Polished Steel WFDS1PS WRDS1PS
Brushed Steel WFDS1BS WRDS1BS
Black Nickel WFDS1BN WRDS1BN

2 Gang Dimmer 250W

Polished Steel WFDS2PS WRDS2PS
Brushed Steel WFDS2BS WRDS2BS
Black Nickel WFDS2BN WRDS2BN

WFDS1PS 3 Gang Dimmer 250W

Polished Steel WFDS3PS WRDS3PS
Brushed Steel WFDS3BS WRDS3BS
Black Nickel WFDS3BN WRDS3BN

4 Gang Dimmer 250W

Polished Steel WFDS4PS WRDS4PS
Brushed Steel WFDS4BS WRDS4BS
Accessories

WRDS3PS
Black Nickel WFDS4BN WRDS4BN
Wiring

30 Data is subject to errors and technical modifications.  New.

 Decorative
Isolator Switches

Isolator Switches Raised Plate

Characteristics:
- Complies with BS EN 60669-2-4.
- Capacity of each terminal 2 x 4.0mm² conductors.
- For mounting boxes see selection chart on page 58.
- WR references supplied with M3.5 x 30mm long fixing screws.
- WF references supplied with M3.5 x 20mm long fixing screws.

Description Cat ref. White Insert Cat ref. Black Insert

Raised Plate 3 Pole Fan Isolator Switch
Polished Steel WRPS3PIPSW WRPS3PIPSB WRPS3PIPSW
Brushed Steel WRPS3PIBSW WRPS3PIBSB
Black Nickel - WRPS3PIBNB

Isolator Switches Flat Plate

Description Cat ref. White Insert Cat ref. Black Insert

Flat Plate 3 Pole Fan Isolator Switch
Polished Steel WFPS3PIPSW WFPS3PIPSB
Brushed Steel WFPS3PIBSW WFPS3PIBSB
Black Nickel - WFPS3PIBNB
WFPS3PIBNB

Accessories
Wiring

Data is subject to errors and technical modifications.  New. 31

 Decorative
Socket Outlets

Socket Outlets Raised Plates

Characteristics:
- Unique patented three part safety shutter.
- Complies with BS 1363 Part 2, a.c only.
- Double pole switching mechanism on switched sockets.
- Twin socket comes with twin earth as standard.
- All terminals are upward facing with clearly printed terminal markings for ease of installation.
- Capacity of each terminal: 3 x 4mm² conductors, switched & unswitched (for other sized conductors see terminal capacities
on page 59).
- For mounting boxes see selection chart on page 58.
- WR references supplied with M3.5 x 30mm long fixing screws.
WRSS81BNB - WF references supplied with M3.5 x 20mm long fixing screws.
- Sockets with USB connections - Warning: To avoid possible damage to the product or spurious insulation readings,
please disconnect the product before carrying out insulation resistance testing.
- Sockets with USB connections: USB output: 5V d.c. 2.4A total max.
- All decorative USB sockets come with spacer colour matched to insert and 30mm & 20mm screws.

Description Cat ref. White Insert Cat ref. Black Insert

Raised Plate 1 Gang Double Pole Switched Socket
Polished Steel WRSS81PSW WRSS81PSB
WRSS82PSW-USB Brushed Steel WRSS81BSW WRSS81BSB
Black Nickel - WRSS81BNB

Raised Plate 2 Gang Double Pole Switched Socket Dual Earth

Polished Steel WRSS82PSW WRSS82PSB
Brushed Steel WRSS82BSW WRSS82BSB
Black Nickel - WRSS82BNB

Raised Plate 5A 1 Gang Unswitched Socket

Polished Steel WRS51PSW WRS51PSB
Brushed Steel WRS51BSW WRS51BSB
Black Nickel - WRS51BNB

Raised Plate 2 Gang Double Pole Dual Earth Switched Socket & Two USB Ports
Polished Steel WRSS82PSW-USB WRSS82PSB-USB
Brushed Steel WRSS82BSW-USB WRSS82BSB-USB
Black Nickel WRSS82BNB-USB

Socket Outlets Flat Plates

Description Cat ref. White Insert Cat ref. Black Insert

Flat Plate 1 Gang Double Pole Switched Socket
Polished Steel WFSS81PSW WFSS81PSB
Brushed Steel WFSS81BSW WFSS81BSB
Black Nickel - WFSS81BNB

Flat Plate 2 Gang Double Pole Switched Socket Dual Earth

WFSS81BSW Polished Steel WFSS82PSW WFSS82PSB
Brushed Steel WFSS82BSW WFSS82BSB
Black Nickel - WFSS82BNB

Flat Plate 5A 1 Gang Unswitched Socket

Polished Steel WFS51PSW WFS51PSB
Brushed Steel WFS51BSW WFS51BSB
Black Nickel - WFS51BNB
WFSS82BNB-USB

Flat Plate 2 Gang Double Pole Dual Earth Switched Socket & Two USB Ports
Polished Steel WFSS82PSW-USB WFSS82PSB-USB
Brushed Steel WFSS82BSW-USB WFSS82BSB-USB
Black Nickel - WFSS82BNB-USB
Accessories

WFSS82BSW-USB
Wiring

32 Data is subject to errors and technical modifications.  New.

 Decorative
Cooker Control Units

Cooker Control Unit Raised Plate

Characteristics:
- Complies with BS 4177.
- Switch and socket are double pole with twin earth as standard.
- Main switch is suitable for isolation.
- All terminals are upward facing with clearly printed terminal markings for ease of installation.
- Capacity of terminals 2 x 6.0mm², 1 x 16.0mm­².
WRCC50NPSB
- For mounting boxes see selection chart on page 58.
- WR references supplied with M3.5 x 30mm long fixing screws.
- WF references supplied with M3.5 x 20mm long fixing screws.

Description Cat ref. White Insert Cat ref. Black Insert

Raised Plate 45A Cooker Control Unit
Polished Steel WRCC50NPSW WRCC50NPSB
Brushed Steel WRCC50NBSW WRCC50NBSB
Black Nickel - WRCC50NBNB WRCC50NBNB

Cooker Control Unit Flat Plate

Description Cat ref. White Insert Cat ref. Black Insert

Flat Plate 45A Cooker Control Unit
Polished Steel WFCC50NPSW WFCC50NPSB
Brushed Steel WFCC50NBSW WFCC50NBSB
WFCC50NPSW
Black Nickel - WFCC50NBNB

Accessories
Wiring

Data is subject to errors and technical modifications.  New. 33

 Decorative
Fused Connection Units

Fused Connection Units Raised Plate

Characteristics:
- Complies with BS 1363-4.
- Single screw fast fix cable clamp accommodates up to 1.5mm² flexible cord.
- All terminals are upward facing with clearly printed terminal markings for ease of installation.
- Capacity of each terminal 2 x 6.0 mm²­conductors.
- For mounting boxes see selection chart on page 58.
- WR references supplied with M3.5 x 30mm long fixing screws.
- WF references supplied with M3.5 x 20mm long fixing screws.

Description Cat ref. White Insert Cat ref. Black Insert

WRSSU83FOBSW
Raised Plate 13A FCU Switched
Polished Steel WRSSU83PSW WRSSU83PSB
Brushed Steel WRSSU83BSW WRSSU83BSB
Black Nickel - WRSSU83BNB

Raised Plate 13A FCU Switched with Flex Outlet

Polished Steel WRSSU83FOPSW WRSSU83FOPSB
Brushed Steel WRSSU83FOBSW WRSSU83FOBSB
Black Nickel - WRSSU83FOBNB

Raised Plate 13A FCU Unswitched

Polished Steel WRSU83PSW WRSU83PSB
Brushed Steel WRSU83BSW WRSU83BSB
Black Nickel - WRSU83BNB

Fused Connection Units Flat Plate

Description Cat ref. White Insert Cat ref. Black Insert

Flat Plate 13A FCU Switched
Polished Steel WFSSU83PSW WFSSU83PSB
Brushed Steel WFSSU83BSW WFSSU83BSB
Black Nickel - WFSSU83BNB

Flat Plate 13A FCU Switched with Flex Outlet

WFSU83BSW Polished Steel WFSSU83FOPSW WFSSU83FOPSB
Brushed Steel WFSSU83FOBSW WFSSU83FOBSB
Black Nickel - WFSSU83FOBNB

Flat Plate 13A FCU Unswitched

Polished Steel WFSU83PSW WFSU83PSB
Brushed Steel WFSU83BSW WFSU83BSB
Black Nickel - WFSU83BNB

WFSSU83FOBNB
Accessories
Wiring

34 Data is subject to errors and technical modifications.  New.

 Decorative
Double Pole Switches (20A)

Double Pole Switches Raised Plate (20A)

Characteristics:
- Complies with BS EN 60699-2-4 a.c. only.
- Single screw fast fix cable clamp accommodates up to 1.5mm² flexible cord.
- All terminals are upward facing with clearly printed terminal markings for ease of installation.
- Capacity of each terminal 2 x 6.0mm² conductors.
- For mounting boxes see selection chart on page 58.
- WR references supplied with M3.5 x 30mm long fixing screws.
- WF references supplied with M3.5 x 20mm long fixing screws.

Description Cat ref. White Insert Cat ref. Black Insert

WRDP84BNB
Raised Plate 20A Double Pole Switch
Polished Steel WRDP84PSW WRDP84PSB
Brushed Steel WRDP84BSW WRDP84BSB
Black Nickel - WRDP84BNB

Raised Plate 20A Double Pole Switch with Flex Outlet

Polished Steel WRDP84FOPSW WRDP84FOPSB
Brushed Steel WRDP84FOBSW WRDP84FOBSB
Black Nickel - WRDP84FOBNB

Raised Plate 20A Double Pole Switch with LED Indicator

Polished Steel WRDP84NPSW WRDP84NPSB
Brushed Steel WRDP84NBSW WRDP84NBSB
Black Nickel - WRDP84NBNB

Double Pole Switches Flat Plate (20A)

Description Cat ref. White Insert Cat ref. Black Insert

Flat Plate 20A Double Pole Switch
Polished Steel WFDP84PSW WFDP84PSB
Brushed Steel WFDP84BSW WFDP84BSB
Black Nickel - WFDP84BNB

Flat Plate 20A Double Pole Switch with Flex Outlet

Polished Steel WFDP84FOPSW WFDP84FOPSB WFDP84FOPSW
Brushed Steel WFDP84FOBSW WFDP84FOBSB
Black Nickel - WFDP84FOBNB

Flat Plate 20A Double Pole Switch with LED Indicator

Polished Steel WFDP84NPSW WFDP84NPSB
Brushed Steel WFDP84NBSW WFDP84NBSB
Black Nickel - WFDP84NBNB

WFDP84BSW
Accessories
Wiring

Data is subject to errors and technical modifications.  New. 35

 Decorative
Double Pole Switches (50A)

Double Pole Switches Raised Plate (50A)

Characteristics:
- Complies with BS EN 60669-2-4.
- Rated conditional short circuit current (Inc) 1500A tested with Hager MTN150 6kA B curve MCB.
- All terminals are upward facing with clearly printed terminal markings for ease of installation.
- Capacity of each terminal 2 x 6mm², 1 x 10mm².
- For mounting boxes see selection chart on page 58.
- WR references supplied with M3.5 x 30mm long fixing screws.
- WF references supplied with M3.5 x 20mm long fixing screws.

Description Cat ref. White Insert Cat ref. Black Insert

WRDP50NPBB
Raised Plate 50A Double Pole Switch 1 Gang with LED Indicator
Polished Steel WRDP50NPSW WRDP50NPSB
Brushed Steel WRDP50NBSW WRDP50NBSB
Black Nickel - WRDP50NBNB

Double Pole Switches Flat Plate (50A)

Description Cat ref. White Insert Cat ref. Black Insert

Flat Plate 50A Double Pole Switch 1 Gang with LED Indicator
Polished Steel WFDP50NPSW WFDP50NPSB
Brushed Steel WFDP50NBSW WFDP50NBSB
Black Nickel - WFDP50NBNB

WFDP50NPSB
Accessories
Wiring

36 Data is subject to errors and technical modifications.  New.

 Decorative
Double Pole Switches, Shaver Sockets

Shaver Socket Raised Plate

Characteristics:
- Complies with BS EN 61558-2-5.
- Capacity of each terminal 2 x 2.5mm² conductors.
- Designed for use in bath/shower rooms & incorporates a double wound transformer for an earth free supply.
- Designed to supply electric shavers rated 50 VA or less.
- Input 230V a.c. output dual voltage 230V a.c. and 115V a.c. outlets.
- Rating 20VA on either voltage.
- Primary circuit protected by a self resetting thermal overload device.
- Insertion of shaver plug automatically switches on the transformer.
- WR references supplied with M3.5 x 30mm long fixing screws.
- WF references supplied with M3.5 x 20mm long fixing screws. WRSO100PSW

Description Cat ref. White Insert Cat ref. Black Insert

Raised Plate 115/230V Shaver Socket
Polished Steel WRSO100PSW WRSO100PSB
Brushed Steel WRSO100BSW WRSO100BSB
Black Nickel - WRSO100BNB

Shaver Socket Flat Plate

Description Cat ref. White Insert Cat ref. Black Insert

Flat Plate 115/230V Shaver Socket
Polished Steel WFSO100PSW WFSO100PSB
Brushed Steel WFSO100BSW WFSO100BSB
Black Nickel - WFSO100BNB

WFSO100PSW

Accessories
Wiring

Data is subject to errors and technical modifications.  New. 37

 Decorative
Telephone & Data

Telephone & Data Raised Plate

Characteristics:
- BT sockets comply with BS 6312-2.
- Supplied with fitted cable tie.
- Quick connection with insulation displacement terminals.
- Clearly printed terminal marking.
- WR references supplied with M3.5 x 30mm long fixing screws.
- WF references supplied with M3.5 x 20mm long fixing screws.

Description Cat ref. White Insert Cat ref. Black Insert

WRBTMBSW Raised Plate BT Master Telephone Outlet

Polished Steel WRBTMPSW WRBTMPSB
Brushed Steel WRBTMBSW WRBTMBSB
Black Nickel - WRBTMBNB

Raised Plate BT Secondary Telephone Outlet

Polished Steel WRBTSPSW WRBTSPSB
Brushed Steel WRBTSBSW WRBTSBSB
Black Nickel - WRBTSBNB

Raised Plate RJ45 Socket

Polished Steel WRRJ45PSW WRRJ45PSB
Brushed Steel WRRJ45BSW WRRJ45BSB
Black Nickel - WRRJ45BNB

Telephone & Data Flat Plate

Description Cat ref. White Insert Cat ref. Black Insert

Flat Plate BT Master Telephone Outlet
Polished Steel WFBTMPSW WFBTMPSB
Brushed Steel WFBTMBSW WFBTMBSB
Black Nickel - WFBTMBNB

Flat Plate BT Secondary Telephone Outlet

WFBTMBNB Polished Steel WFBTSPSW WFBTSPSB
Brushed Steel WFBTSBSW WFBTSBSB
Black Nickel - WFBTSBNB

Flat Plate RJ45 Socket

Polished Steel WFRJ45PSW WFRJ45PSB
Brushed Steel WFRJ45BSW WFRJ45BSB
Black Nickel - WFRJ45BNB

WFBTMPSW
Accessories
Wiring

38 Data is subject to errors and technical modifications.  New.

 Decorative
TV & Satellite

TV & Satellite Raised Plate

Characteristics:
- TV outlets comply with BS 3041.
- Satellite outlets comply with BS EN 50083-2.
- Fully screened.
- DAB compatible.
- WR references supplied with M3.5 x 30mm long fixing screws.
- WF references supplied with M3.5 x 20mm long fixing screws.

Description Cat ref. White Insert Cat ref. Black Insert

Raised Plate Single F Type Satellite Outlet Screened WRSATBSW
Polished Steel WRSATPSW WRSATPSB
Brushed Steel WRSATBSW WRSATBSB
Black Nickel - WRSATBNB

Raised Plate Single CO-AX TV Outlet Female

Polished Steel WRTVFPSW WRTVFPSB
Brushed Steel WRTVFBSW WRTVFBSB
Black Nickel - WRTVFBNB

Raised Plate Triplexer TV, FM/DAB & Satellite Outlet

Polished Steel WRTXPSW WRTXPSB WRSATPSW
Brushed Steel WRTXBSW WRTXBSB
Black Nickel - WRTXBNB

Raised Plate Quadplexer TV, FM/DAB, Satellite 1 & Satellite 2 Outlet

Polished Steel WRQXPSW WRQXPSB
Brushed Steel WRQXBSW WRQXBSB
Black Nickel - WRQXBNB

WRTXBNB

TV & Satellite Flat Plate

Description Cat ref. White Insert Cat ref. Black Insert

Flat Plate Single F Type Satellite Outlet Screened
Polished Steel WFSATPSW WFSATPSB
Brushed Steel WFSATBSW WFSATBSB
Black Nickel - WFSATBNB

Flat Plate Single CO-AX TV Outlet Female

Polished Steel WFTVFPSW WFTVFPSB
WFTVFBSW
Brushed Steel WFTVFBSW WFTVFBSB
Black Nickel - WFTVFBNB

Flat Plate Triplexer TV, FM/DAB & Satellite Outlet

Polished Steel WFTXPSW WFTXPSB
Brushed Steel WFTXBSW WFTXBSB
Black Nickel - WFTXBNB

Flat Plate Quadplexer TV, FM/DAB, Satellite 1 & Satellite 2 Outlet

Polished Steel WFQXPSW WFQXPSB
Brushed Steel WFQXBSW WFQXBSB
WFDXBSW
Black Nickel - WFQXBNB
Accessories
Wiring

Data is subject to errors and technical modifications.  New. 39

 Decorative
Euro Frontplates, Euro Lounge Plates

Euro Frontplates Raised Plate

Characteristics:
- Carrier plates facilitate installation of industry standard modules.
- Easy to configure for all applications.
- Quick release of modules for maintenance.
- WR references supplied with M3.5 x 30mm long fixing screws.
- WF references supplied with M3.5 x 20mm long fixing screws.

Description Cat ref. White Insert Cat ref. Black Insert

Raised Plate 1 Module
WRP1EUPSB Polished Steel WRP1EUPSW WRP1EUPSB
Brushed Steel WRP1EUBSW WRP1EUBSB
Black Nickel - WRP1EUBNB

Raised Plate 2 Modules

Polished Steel WRP2EUPSW WRP2EUPSB
Brushed Steel WRP2EUBSW WRP2EUBSB

WRP1EUPSB Black Nickel - WRP2EUBNB

Raised Plate 4 Modules

Polished Steel WRP4EUPSW WRP4EUPSB
Brushed Steel WRP4EUBSW WRP4EUBSB
Black Nickel - WRP4EUBNB

Euro Frontplates Flat Plate

Description Cat ref. White Insert Cat ref. Black Insert

Flat Plate 1 Module
Polished Steel WFP1EUPSW WFP1EUPSB
Brushed Steel WFP1EUBSW WFP1EUBSB
Black Nickel - WFP1EUBNB

Flat Plate 2 Modules

WFP1EUBSB Polished Steel WFP2EUPSW WFP2EUPSB
Brushed Steel WFP2EUBSW WFP2EUBSB
Black Nickel - WFP2EUBNB

Flat Plate 4 Modules

Polished Steel WFP4EUPSW WFP4EUPSB
Brushed Steel WFP4EUBSW WFP4EUBSB
Black Nickel - WFP4EUBNB

WFP1EUBNB

Euro Lounge Plates

Description Cat ref. White Insert Cat ref. Black Insert

Flat Plate Lounge Plate for TV, Power & Data
Polished Steel WFTVLPPSW WFTVLPPSB
Brushed Steel WFTVLPBSW WFTVLPBSB
WFTVLPPSW
Black Nickel - WFTVLPBNB
White Metal WFTVLPWW -

Raised Plate Lounge Plate for TV, Power & Data

White Metal WRTVLPWW -

Lounge Plate Back Box

Accessories

Steel WFTVBOX -
Wiring

40 Data is subject to errors and technical modifications.  New.

 Decorative
Euro Modules

Euro Style Modules

Description Mod Width Cat ref. (White) Cat ref. (Black)

BT Telephone Master Euromodule 1 WMMBTM WMMBTMB
BT Telephone Secondary Euromodule 1 WMMBTS WMMBTSB
RJ11 - Modem Euromodule 1 WMMRJ11 WMMRJ11B
RJ45 - Cat 6 UTP Euromodule 1 WMMRJ45 WMMRJ45B
Phono Plugs - Red/Black - Gold Plated Euromodule 1 WMMPP -
Speaker Terminal Posts - Gold Plated Euromodule 1 WMMSP -
Single IEC Female Non Isolated Euromodule 1 WMMTVF WMMTVFB WMMBTM WMMSAT
Single IEC Male Non Isolated Euromodule 1 WMMTVM WMMTVMB
Single Satellite F Connector Euromodule 1 WMMSAT WMMSATB
Single Blank Euromodule 1 WMMB WMMBB
PIR Occupancy Sensor Euromodule 5m 1 WMMPIR05X -
PIR Occupancy Sensor Euromodule 10m 1 WMMPIR10X -
HDMI Module 2 WMMHDMI WMMHDMIB
Triplexer - TV, Satellite & FM Radio Euromodule 2 WMMTX WMMTXB
Quadplexer - TV, Satellite, FM Radio & Return Euromodule 2 WMMQX WMMQXB

WMMQXB

Accessories
Wiring

Data is subject to errors and technical modifications.  New. 41

 Decorative
Grid Plates

Grid Plates Raised Plate

Description Cat ref.

Raised Plate 1 Gang Grid Plate
Polished Steel WRGP1PS
Brushed Steel WRGP1BS
Black Nickel WRGP1BN

Raised Plate 2 Gang Grid Plate

WFGP1PS Polished Steel WRGP2PS
Brushed Steel WRGP2BS
Black Nickel WRGP2BN

Raised Plate 3 Gang Grid Plate

Polished Steel WRGP3PS
Brushed Steel WRGP3BS
Black Nickel WRGP3BN

Raised Plate 4 Gang Grid Plate

Polished Steel WRGP4PS
Brushed Steel WRGP4BS
Black Nickel WRGP4BN

WRGP12BS Raised Plate 6 Gang (3 x 2) Grid Plate

Polished Steel WRGP6PS
Brushed Steel WRGP6BS
Black Nickel WRGP6BN

Raised Plate 8 Gang (4 x 2) Grid Plate

Polished Steel WRGP8PS
Brushed Steel WRGP8BS
Black Nickel WRGP8BN

Raised Plate 12 Gang (4 x 3) Grid Plate

Polished Steel WRGP12PS
Brushed Steel WRGP12BS
Black Nickel WRGP12BN
Accessories
Wiring

42 Data is subject to errors and technical modifications.  New.

 Decorative
Grid Plates, Grid Frames

Grid Plates Flat Plate

Description Cat ref.

Flat Plate 1 Gang Grid Plate
Polished Steel WFGP1PS
Brushed Steel WFGP1BS
Black Nickel WFGP1BN

Flat Plate 2 Gang Grid Plate

Polished Steel WFGP2PS WFGP1PS
Brushed Steel WFGP2BS
Black Nickel WFGP2BN

Flat Plate 3 Gang Grid Plate

Polished Steel WFGP3PS
Brushed Steel WFGP3BS
Black Nickel WFGP3BN

Flat Plate 4 Gang Grid Plate

Polished Steel WFGP4PS
Brushed Steel WFGP4BS WFGP2BS
Black Nickel WFGP4BN

Flat Plate 6 Gang (3 x 2) Grid Plate

Polished Steel WFGP6PS
Brushed Steel WFGP6BS
Black Nickel WFGP6BN

Flat Plate 8 Gang (4 x 2) Grid Plate

Polished Steel WFGP8PS
Brushed Steel WFGP8BS
Black Nickel WFGP8BN

Flat Plate 12 Gang (4 x 3) Grid Plate

Polished Steel WFGP12PS
Brushed Steel WFGP12BS
Black Nickel WFGP12BN

Grid Frames

Description Cat ref.

Frames for White Moulded and Decorative Raised Plate ranges
1 Gang Frame WMGF1 WMGF34
2 Gang Frame WMGF2
3/4 Gang Frame WMGF34

Frames for Decorative Flat Plate ranges

1 Gang Frame WFGF1
2 Gang Frame WFGF2
3/4 Gang Frame WFGF34
Accessories
Wiring

Data is subject to errors and technical modifications.  New. 43

 Decorative
Grid Switches

Grid Switches - White Moulded Finish

Characteristics:
- Complies with BS EN 606691-1 switches, BS 5733 fuse carrier.
- Shallowest switch modules which clip in from the front for ease of installation and maintenance.
- Terminal screw can be accessed with modules clipped into frames.
- Frames locate to finished wall level.
- Frames clip together to ease alignment for 6 gang and 8 gang applications.
- We also offer a bespoke printing service for your individual requirements. Please contact our Sales Service Centre on
01952 675612 for further details.

Description Cat ref. White Insert Cat ref. Black Insert

WMGKS
Grid Switches
Blank Module WMGB1 -
20AX 2 Way Single Pole Switch WMGS12 -
20A Intermediate Switch WMGS16 -
20A 2 Way Retractive Switch WMGS22R -
20A 1 Way Double Pole Switch WMGSDP2 -
20A 1 Way Double Pole Switch with LED Indicator WMGSDP2N -
20A Double Pole Key Switch WMGKS -
20A Double Pole Key Switch Printed ‘Emergency Lighting Test’ WMGKS/EL -
13A Fuse Carrier WMGFU13 -
Dimmer Slave Switch WMGSD1S WMGSD1SB
WMGB1
Dimmer Switch Leading Edge WMGSD1L WMGSD1LB
Dimmer Switch Trailing Edge WMGSD1T WMGSD1TB
Red Indicator WMINDRED WMINDREDB
2 Way & Centre Off Latching Switch WMGS13L WMGS13LB
2 Way & Centre Off Latching Switch Red Rocker WMGS13LR -
2 Way & Centre Off Retractive Switch WMGS13R WMGS13RB
2 Way & Centre Off Retractive Switch Red Rocker WMGS13RR -
13A Fused Connection Unit Unswitched with LED WMGSU83N -

20A 1 Way Double Pole Grid Switches - Printed

WMINDRED
Printed ‘Boiler’ WMGSDP2/BOI -
Printed 'Cooker Hood' WMGSDP2/CHD WMGSDP2B/CHD
Printed 'Dishwasher' WMGSDP2/DW WMGSDP2B/DW
Printed 'Extract Fan' WMGSDP2/EF WMGSDP2B/EF
Printed 'Fridge Freezer' WMGSDP2/FF WMGSDP2B/FF
Printed 'Freezer' WMGSDP2/FRE WMGSDP2B/FRE
Printed 'Fridge' WMGSDP2/FRI WMGSDP2B/FRI
Printed 'Hob' WMGSDP2/HB WMGSDP2B/HB
Printed 'Heating' WMGSDP2/HTG WMGSDP2B/HTG
Printed 'Microwave' WMGSDP2/MW WMGSDP2B/MW
Printed 'Micro Wave' WMGSDP2MW2 -
WMGSDP2/CHD Printed 'Tumble Dryer' WMGSDP2/TD WMGSDP2B/TD
Printed 'Waste Disposal' WMGSDP2/WD WMGSDP2B/WD
Printed 'Washing Machine' WMGSDP2/WM WMGSDP2B/WM
Printed 'Oven' WMGSDP2/OV WMGSDP2B/OV
Printed 'Wine Cooler' WMGSDP2/WC WMGSDP2B/WC
Printed 'Hot Water' WMGSDP2/HW WMGSDP2B/HW
Printed 'Coffee Maker' WMGSDP2/CM WMGSDP2B/CM
Printed 'Hot Drawer' WMGSDP2/HD WMGSDP2B/HD
Printed 'Fan Boost' WMGSDP2/FB WMGSDP2B/FB
Printed ‘Outside Light’ WMGSDP2/OL -
Printed 'Outside Socket' WMGSDP2/OS -
WMGSDP2/EF Printed ‘Plinth Heater’ WMGSDP2/PH -
Accessories
Wiring

44 Data is subject to errors and technical modifications.  New.

 Decorative
Grid Switches

Grid Switches - Printed

Characteristics:
- Complies with BS EN 606691-1 switches, BS 5733 fuse carrier.
- Shallowest switch modules which clip in from the front for ease of installation and maintenance.
- Terminal screw can be accessed with modules clipped into frames.
- Frames locate to finished wall level.
- Frames clip together to ease alignment for 6 gang and 8 gang applications.
- We also offer a bespoke printing service for your individual requirements. Please contact our Sales Service Centre on
01952 675612 for further details.

Description Cat ref. White Insert Cat ref. Black Insert

WMGSDP2N/CHD
20A 1 Way Double Pole Grid Switches with LED Indicator - Printed
Printed 'Cooker Hood' WMGSDP2N/CHD WMGSDP2NB/CHD
Printed 'Dishwasher' WMGSDP2N/DW WMGSDP2NB/DW
Printed 'Extract Fan' WMGSDP2N/EF WMGSDP2NB/EF
Printed 'Fridge Freezer' WMGSDP2N/FF WMGSDP2NB/FF
Printed 'Freezer' WMGSDP2N/FRE WMGSDP2NB/FRE
Printed 'Fridge' WMGSDP2N/FRI WMGSDP2NB/FRI
Printed 'Hob' WMGSDP2N/HB WMGSDP2NB/HB
Printed 'Heating' WMGSDP2N/HTG WMGSDP2NB/HTG
Printed 'Microwave' WMGSDP2N/MW WMGSDP2NB/MW
Printed 'Tumble Dryer' WMGSDP2N/TD WMGSDP2NB/TD WMGSDP2N/DW
Printed 'Waste Disposal' WMGSDP2N/WD WMGSDP2NB/WD
Printed 'Washing Machine' WMGSDP2N/WM WMGSDP2NB/WM
Printed 'Oven' WMGSDP2N/OV -
Printed ‘Outside Light’ WMGSDP2N/OL -
Printed 'Outside Socket' WMGSDP2N/OS -
Printed ‘Plinth Heater’ WMGSDP2N/PH -

WMGSDP2N/EF

WMGSDP2N/FF

Accessories
Wiring

Data is subject to errors and technical modifications.  New. 45

 Decorative
Grid Switches

Grid Switches - Decorative Finish

Characteristics:
- Complies with BS EN 606691-1 switches, BS 5733 fuse carrier.
- Shallowest switch modules for ease of installation.
- Modules clip from the front for ease of installation and maintenance.
- Terminal screw can be accessed with modules clipped into frames.
- Frames locate to finished wall level.
- Frames clip to ease alignment for 6 gang and 8 gang applications.

Description Cat ref. White Insert Cat ref. Black Insert

WMGB1BSW 20AX 2 Way Single Pole Switch

Polished Steel WMGS12PSW WMGS12PSB
Brushed Steel WMGS12BSW WMGS12BSB
Black Nickel - WMGS12BNB

20A Intermediate Switch

Polished Steel WMGS16PSW WMGS16PSB
Brushed Steel WMGS16BSW WMGS16BSB
Black Nickel - WMGS16BNB

20A 2 Way Retractive Switch

WMGS12PSB Polished Steel WMGS22RPSW WMGS22RPSB
Brushed Steel WMGS22RBSW WMGS22RBSB
Black Nickel - WMGS22RBNB

20A 1 Way Double Pole Switch

Polished Steel WMGSDP2PSW WMGSDP2PSB
Brushed Steel WMGSDP2BSW WMGSDP2BSB
Black Nickel - WMGSDP2BNB

13A Fuse Carrier

Polished Steel WMGFU13PSW WMGFU13PSB
WMGB1BNB Brushed Steel WMGFU13BSW WMGFU13BSB
Black Nickel - WMGFU13BNB

Blank Module
Polished Steel WMGB1PSW WMGB1PSB
Brushed Steel WMGB1BSW WMGB1BSB
Black Nickel - WMGB1BNB

WMGB1BSW
Accessories
Wiring

46 Data is subject to errors and technical modifications.  New.

 Decorative
Blank Plates

Blank Plates Raised Plate

Characteristics:
- WR references supplied with M3.5 x 30mm long fixing screws.
- WF references supplied with M3.5 x 20mm long fixing screws.

Description Cat ref.

WRP2PS
Raised Plate Switch Blank Plate
Polished Steel WRP1PS
Brushed Steel WRP1BS
Black Nickel WRP1BN

Raised Plate Twin Blank Plate

Polished Steel WRP2PS
Brushed Steel WRP2BS
Black Nickel WRP2BN

Blank Plates Flat Plate

Description Cat ref.

Flat Plate Switch Blank Plate
Polished Steel WFP1PS
Brushed Steel WFP1BS
Black Nickel WFP1BN

Flat Plate Twin Blank Plate

Polished Steel WFP2PS
WFP1BS
Brushed Steel WFP2BS
Black Nickel WFP2BN

Accessories
Wiring

Data is subject to errors and technical modifications.  New. 47

 Metalclad
Switches, Sockets

Metalclad Wall Switches (10A)

Characteristics:
- Unique patented LOOP terminal to allow neutral looping at the switch.
- Complies with BS EN 60669-1, a.c only.
- ‘X’ rated - No need to de-rate for fluorescent loads.
- Capacity of each terminal 2 x 4.0mm² conductors.

Cat ref. With Backbox Cat ref. With Backbox

Description Cat ref. Plate Only Without Knockouts With Knockouts
Wall Switches White
WPPS12W 10AX 1 Gang 2 Way Wall Switch WPPS12W - -
10AX 2 Gang 2 Way Wall Switch WPPS22W - -
10AX 3 Gang 2 Way Wall Switch WPPS32W - -
10AX Push Switch WPPS12RW - -

Wall Switches Grey

10AX 1 Gang 2 Way Wall Switch WPPS12 WPPS12B WPPS12BKO
10AX 2 Gang 2 Way Wall Switch WPPS22 WPPS22B WPPS22BKO
10AX 3 Gang 2 Way Wall Switch WPPS32 WPPS32B WPPS32BKO
10AX Push Switch WPPS12R WPPS12RB WPPS12RBKO

WPPS12

Metalclad Wall Switches (20A)

Characteristics:
- Unique patented LOOP terminal to allow neutral looping at the switch.
- Complies with BS EN 60669-1, a.c only.
- Capacity of each terminal 2 x 6.0mm² conductors.

Cat ref. With Backbox Cat ref. With Backbox

Description Cat ref. Plate Only Without Knockouts With Knockouts
Wall Switches White
20A Double Pole Switch with Flex Outlet WPDP84FOW - -
WPDP84FO 20A Double Pole Switch with LED Indicator & Flex Outlet WPDP84FONW - -

Wall Switches Grey

20A Double Pole Switch with Flex Outlet WPDP84FO WPDP84FOB WPDP84FOBKO
20A Double Pole Switch with LED Indicator & Flex Outlet WPDP84FON WPDP84FONB WPDP84FONBKO

Metalclad Wall Switches (50A)

Characteristics:
- Unique patented LOOP terminal to allow neutral looping at the switch.
- Complies with BS EN 60669-2-4.
- Capacity of each terminal 2 x 6.0mm² conductors.

Cat ref. With Backbox Cat ref. With Backbox

Description Cat ref. Plate Only Without Knockouts With Knockouts
Wall Switches White
50A Double Pole Switch 1 Gang with LED Indicator WPDP50NW - -
WPDP50N
Wall Switches Grey
50A Double Pole Switch 1 Gang with LED Indicator WPDP50N WPDP50NB WPDP50NBKO
Accessories
Wiring

48 Data is subject to errors and technical modifications.  New.

 Metalclad
Fused Connection Units, Grid Plates

Metalclad Socket Outlets

Characteristics:
- Unique patented three part safety shutter.
- Complies with BS 1363-2, a.c only.
- Double pole switching mechanism on switched sockets.
- Twin socket comes with twin earth as standard.
- Terminal screws grouped in-line and upward facing for ease of installation with clear printed and engraved terminal markings.
- Capacity of each terminal: 5 x 2.5mm² conductors switched; 4 x 2.5mm² unswitched (for other sized conductors see
terminal capacities on page 59).
- Sockets with USB - Warning: To avoid possible damage to the product or spurious insution readings, please disconnect
the product before carrying out insulation resistance testing.
- Sockets with USB - USB output: 5V d.c. 2.4A total max. WPSS81W

Cat ref. With Backbox Cat ref. With Backbox

Description Cat ref. Plate Only Without Knockouts With Knockouts
Switched Socket Outlets White
1 Gang Double Pole Switched Socket WPSS81W - -
1 Gang Double Pole Switched Socket with LED Indicator WPSS81NW - -
2 Gang Double Pole Switched Socket WPSS82W - -
2 Gang Double Pole Switched Socket with LED Indicator WPSS82NW - -
2 Gang Double Pole Switched Socket Outboard Rockers WPSS82OW - -
2 Gang Double Pole Switched Socket with Two USB Ports WPSS82W-USB - -

WPSS81
Switched Socket Outlets Grey
1 Gang Double Pole Switched Socket WPSS81 WPSS81B WPSS81BKO
1 Gang Double Pole Switched Socket with LED Indicator WPSS81N WPSS81NB WPSS81NBKO
2 Gang Double Pole Switched Socket WPSS82 WPSS82B WPSS82BKO
2 Gang Double Pole Switched Socket with LED Indicator WPSS82N WPSS82NB WPSS82NBKO
2 Gang Double Pole Switched Socket Outboard Rockers WPSS82O WPSS82OB WPSS82OBKO
2 Gang Double Pole Switched Socket with Two USB Ports WPSS82-USB WPSS82B-USB WPSS82BKO-USB
WPSS82W-USB

Metalclad Fuse Connection Units

Characteristics:
- Complies with BS 1363-4.
- Single screw fast fix cable clamp accommodates up to 1.5mm² flexible cord.
- All terminals are upward facing with clearly printed terminal markings for ease of installation.
- Capacity of each terminal 2 x 6.0 mm²­conductors.

Cat ref. With Backbox Cat ref. With Backbox

Description Cat ref. Plate Only Without Knockouts With Knockouts
Fuse Connection Units White
13A FCU Unswitched with Flex Outlet WPSU83FOW - - WPSSU83FOW
13A FCU Switched with Flex Outlet WPSSU83FOW - -
13A FCU Switched with LED Indicator & Flex Outlet WPSSU83FONW - -

Fuse Connection Units Grey

13A FCU Unswitched with Flex Outlet WPSU83FO WPSU83FOB WPSU83FOBKO
13A FCU Switched with Flex Outlet WPSSU83FO WPSSU83FOB WPSSU83FOBKO
13A FCU Switched with LED Indicator & Flex Outlet WPSSU83FON WPSSU83FONB WPSSU83FONBKO

WPSSU83FON
Accessories
Wiring

Data is subject to errors and technical modifications.  New. 49

 Metalclad
Grid Plates, Frames & Switches

Metalclad Grid Plates

Characteristics:
- For Grid Switches, please see page 44.

Cat ref. With Backbox Cat ref. With Backbox

Description Cat ref. Plate Only Without Knockouts With Knockouts
Grid Plates White
Grid plate 1 Gang WPGP1W - -
Grid plate 2 Gang WPGP2W - -

WPGP1W Grid plate 3 Gang WPGP3W - -

Grid plate 4 Gang WPGP4W - -
Grid plate 6 Gang WPGP6W - -
Grid plate 8 Gang WPGP8W - -

Grid Plates Grey

Grid plate 1 Gang WPGP1 WPGP1B WPGP1BKO
Grid plate 2 Gang WPGP2 WPGP2B WPGP2BKO
Grid plate 3 Gang WPGP3 WPGP3B WPGP3BKO
Grid plate 4 Gang WPGP4 WPGP4B WPGP4BKO
Grid plate 6 Gang WPGP6 WPGP6B WPGP6BKO
WPGP1 Grid plate 8 Gang WPGP8 WPGP8B WPGP8BKO

Grid Frames

Description Cat ref.

Frames for White Moulded, Decorative & Metalclad Raised Plate ranges
1 Gang Frame WMGF1
WMGF34
2 Gang Frame WMGF2
3/4 Gang Frame WMGF34

Grid Switches - White Moulded Finish

Characteristics:
- Complies with BS EN 606691-1 switches, BS 5733 fuse carrier.
- Shallowest switch modules which clip in from the front for ease of installation and maintenance.
- Terminal screw can be accessed with modules clipped into frames.
- Frames locate to finished wall level.
- Frames clip together to ease alignment for 6 gang and 8 gang applications.
- We also offer a bespoke printing service for your individual requirements. Please contact our Sales Service Centre on
01952 675612 for further details.

WMGKS Description Cat ref. White Insert Cat ref. Black Insert
Grid Switches
Blank Module WMGB1 -
20AX 2 Way Single Pole Switch WMGS12 -
20A Intermediate Switch WMGS16 -
20A 2 Way Retractive Switch WMGS22R -
20A 1 Way Double Pole Switch WMGSDP2 -
20A 1 Way Double Pole Switch with LED Indicator WMGSDP2N -
20A Double Pole Key Switch WMGKS -
20A Double Pole Key Switch Printed ‘Emergency Lighting Test’ WMGKS/EL -
13A Fuse Carrier WMGFU13 -
WMGB1 Dimmer Slave Switch WMGSD1S WMGSD1SB
Dimmer Switch Leading Edge WMGSD1L WMGSD1LB
Dimmer Switch Trailing Edge WMGSD1T WMGSD1TB
Red Indicator WMINDRED WMINDREDB
2 Way & Centre Off Latching Switch WMGS13L WMGS13LB
2 Way & Centre Off Latching Switch Red Rocker WMGS13LR -
2 Way & Centre Off Retractive Switch WMGS13R WMGS13RB
2 Way & Centre Off Retractive Switch Red Rocker WMGS13RR -
Accessories

13A Fused Connection Unit Unswitched with LED WMGSU83N -

Wiring

WMINDRED

50 Data is subject to errors and technical modifications.  New.

 Metalclad
Grid Switches

20A 1 Way Double Pole Grid Switches - Printed

Printed ‘Boiler’ WMGSDP2/BOI -
Printed 'Cooker Hood' WMGSDP2/CHD WMGSDP2B/CHD
Printed 'Dishwasher' WMGSDP2/DW WMGSDP2B/DW
Printed 'Extract Fan' WMGSDP2/EF WMGSDP2B/EF
Printed 'Fridge Freezer' WMGSDP2/FF WMGSDP2B/FF
Printed 'Freezer' WMGSDP2/FRE WMGSDP2B/FRE
Printed 'Fridge' WMGSDP2/FRI WMGSDP2B/FRI
Printed 'Hob' WMGSDP2/HB WMGSDP2B/HB
Printed 'Heating' WMGSDP2/HTG WMGSDP2B/HTG WMGSDP2/CHD
Printed 'Microwave' WMGSDP2/MW WMGSDP2B/MW
Printed 'Micro Wave' WMGSDP2MW2 -
Printed 'Tumble Dryer' WMGSDP2/TD WMGSDP2B/TD
Printed 'Waste Disposal' WMGSDP2/WD WMGSDP2B/WD
Printed 'Washing Machine' WMGSDP2/WM WMGSDP2B/WM
Printed 'Oven' WMGSDP2/OV WMGSDP2B/OV
Printed 'Wine Cooler' WMGSDP2/WC WMGSDP2B/WC
Printed 'Hot Water' WMGSDP2/HW WMGSDP2B/HW
Printed 'Coffee Maker' WMGSDP2/CM WMGSDP2B/CM
Printed 'Hot Drawer' WMGSDP2/HD WMGSDP2B/HD
Printed 'Fan Boost' WMGSDP2/FB WMGSDP2B/FB WMGSDP2/EF
Printed ‘Outside Light’ WMGSDP2/OL -
Printed 'Outside Socket' WMGSDP2/OS -
Printed ‘Plinth Heater’ WMGSDP2/PH -

Grid Switches with LED Indicator - Printed

Characteristics:
- Complies with BS EN 606691-1 switches, BS 5733 fuse carrier.
- Shallowest switch modules which clip in from the front for ease of installation and maintenance.
- Terminal screw can be accessed with modules clipped into frames.
- Frames locate to finished wall level.
- Frames clip together to ease alignment for 6 gang and 8 gang applications.
- We also offer a bespoke printing service for your individual requirements. Please contact our Sales Service Centre on
01952 675612 for further details.

Description Cat ref. White Insert Cat ref. Black Insert

WMGSDP2N/CHD
20A 1 Way Double Pole Grid Switches with LED Indicator - Printed
Printed 'Cooker Hood' WMGSDP2N/CHD WMGSDP2NB/CHD
Printed 'Dishwasher' WMGSDP2N/DW WMGSDP2NB/DW
Printed 'Extract Fan' WMGSDP2N/EF WMGSDP2NB/EF
Printed 'Fridge Freezer' WMGSDP2N/FF WMGSDP2NB/FF
Printed 'Freezer' WMGSDP2N/FRE WMGSDP2NB/FRE
Printed 'Fridge' WMGSDP2N/FRI WMGSDP2NB/FRI
Printed 'Hob' WMGSDP2N/HB WMGSDP2NB/HB
Printed 'Heating' WMGSDP2N/HTG WMGSDP2NB/HTG
Printed 'Microwave' WMGSDP2N/MW WMGSDP2NB/MW
Printed 'Tumble Dryer' WMGSDP2N/TD WMGSDP2NB/TD WMGSDP2N/DW
Printed 'Waste Disposal' WMGSDP2N/WD WMGSDP2NB/WD
Printed 'Washing Machine' WMGSDP2N/WM WMGSDP2NB/WM
Printed 'Oven' WMGSDP2N/OV -
Printed ‘Outside Light’ WMGSDP2N/OL -
Printed 'Outside Socket' WMGSDP2N/OS -
Printed ‘Plinth Heater’ WMGSDP2N/PH -

WMGSDP2N/EF
Accessories
Wiring

Data is subject to errors and technical modifications.  New. 51

 Metalclad
Euro Plates, Modules

Metalclad Euro Plates

Characteristics:
- Carrier plates facilitate installation of industry standard modular data outlets.
- Easy to configure for all applications.
- Quick release of modules for maintenance.
- Available as plate only for installation with standard wall box.

Cat ref. With Backbox Cat ref. With Backbox

Description Cat ref. Plate Only Without Knockouts With Knockouts
Euro Plates White
WPP1EUW 1 Module Euro Plate WPP1EUW - -
2 Module Euro Plate WPP2EUW - -
4 Module Euro Plate WPP4EUW - -

Euro Plates Grey

1 Module Euro Plate WPP1EU WPP1EUB WPP1EUBKO
2 Module Euro Plate WPP2EU WPP2EUB WPP2EUBKO
4 Module Euro Plate WPP4EU WPP4EUB WPP4EUBKO

WPP1EU

Euro Style Modules

Description Mod Width Cat ref. (White) Cat ref. (Black)

BT Telephone Master Euromodule 1 WMMBTM WMMBTMB
BT Telephone Secondary Euromodule 1 WMMBTS WMMBTSB
RJ11 - Modem Euromodule 1 WMMRJ11 WMMRJ11B
RJ45 - Cat 6 UTP Euromodule 1 WMMRJ45 WMMRJ45B
Phono Plugs - Red/Black - Gold Plated Euromodule 1 WMMPP -
Speaker Terminal Posts - Gold Plated Euromodule 1 WMMSP -
WMMBTM WMMSAT Single IEC Female Non Isolated Euromodule 1 WMMTVF WMMTVFB
Single IEC Male Non Isolated Euromodule 1 WMMTVM WMMTVMB
Single Satellite F Connector Euromodule 1 WMMSAT WMMSATB
Single Blank Euromodule 1 WMMB WMMBB
PIR Occupancy Sensor Euromodule 5m 1 WMMPIR05X -
PIR Occupancy Sensor Euromodule 10m 1 WMMPIR10X -
HDMI Module 2 WMMHDMI WMMHDMIB
Triplexer - TV, Satellite & FM Radio Euromodule 2 WMMTX WMMTXB
Quadplexer - TV, Satellite, FM Radio & Return Euromodule 2 WMMQX WMMQXB

WMMQXB
Accessories
Wiring

52 Data is subject to errors and technical modifications.  New.

 Metalclad
Accessories

Metalclad Back Boxes

Cat ref. With Backbox Cat ref. With Backbox

Description Without Knockouts With Knockouts
Accessories White
Single Backbox WPB140W WPB140KOW
Twin Backbox WPB240W WPB240KOW
Two Row Twin Backbox WPB6840W WPB6840KOW

Accessories Grey
Single Backbox WPB140 WPB140KO WPB140W

Twin Backbox WPB240 WPB240KO

Two Row Twin Backbox WPB6840 WPB6840KO

WPB140KO

Metalclad Blank Plates

Cat ref. With Backbox Cat ref. With Backbox

Description Cat ref. Plate Only Without Knockouts With Knockouts
Blank Plates White
Single Blank Plate WPP1W - -
Twin Blank Plate WPP2W - -

Blank Plates Grey

Single Blank Plate WPP1 WPP1B WPP1BKO
Twin Blank Plate WPP2 WPP2B WPP2BKO WPP1W

WPP1 Accessories
Wiring

Data is subject to errors and technical modifications.  New. 53

 IP66
Wall Switches, Socket Outlets, Fused Connection Units

Wall Switches

Characteristics:
- IP66 rating conforms to BS EN 60529 : 1992.
- Functional products tested and certified to BS EN 60669-1, a.c. only.
- Robust and rugged enclosures designed to withstand the elements.
- Cable entries: 90 x 90 = 4x20, 1x20 & 1x25

Dimensions (mm)
Description (W x H) Cat ref.
10AX 1 Gang 2 Way Switch 90 x 90 WXPPS12
WXPPS12 10AX 2 Gang 2 Way Switch 90 x 90 WXPPS22
20AX Double Pole 1 Gang 1 Way Switch 90 x 90 WXPDP84
10A 1 Gang Bell Push Switch 90 x 90 WXPPS12B

Socket Outlets

Characteristics:
- IP66 rating conforms to BS EN 60529 : 1992.
- Functional products tested and certified to BS 1363 Part 2, a.c. only.
- Robust and rugged enclosures designed to withstand the elements.
- Unique double hinge allows lid to open a full 180 degrees.
- Fixing point for padlock.
- Cable entries: 103 x 116.5 = 4x20, 1x20 & 1x25
164 x 116.5 = 6x20, 1x20 & 1x25

Dimensions (mm)
WXPSS82
Description (W x H) Cat ref.
13A 1 Gang Double Pole Unswitched Socket 103 x 116.5 WXPS81
13A 1 Gang Double Pole Switched Socket 103 x 116.5 WXPSS81
13A 2 Gang Double Pole Unswitched Socket 164 x 116.5 WXPS82
13A 2 Gang Double Pole Switched Socket 164 x 116.5 WXPSS82

Fused Connection Units

Characteristics:
- IP66 rating conforms to BS EN 60529 : 1992.
- Functional products tested and certified to BS 1363-4.
- Robust and rugged enclosures designed to withstand the elements.
- Unique double hinge allows lid to open a full 180 degrees.
- Fixing point for padlock.
- Cable entries: 103 x 116.5 = 4x20, 1x20 & 1x25

Dimensions (mm)
Description (W x H) Cat ref.
WXPSSU83FO
13A Double Pole Fused Connect Unit with Flex Outlet 103 x 116.5 WXPSSU83FO

Electric Vehicle Socket Outlet

Characteristics:
- IP66 rating conforms to BS EN 60529 : 1992.
- Functional products tested and certified to BS 1363 Part 2, a.c. only.
- Robust and rugged enclosures designed to withstand the elements.
- Unique double hinge allows lid to open a full 180 degrees.
- Fixing point for padlock.
- Cable entries: 103 x 116.5 = 4x20, 1x20 & 1x25

Dimensions (mm)
Description (W x H) Cat ref.
WXPSS81EV
13A 1 Gang Double Pole Switched Socket 103 x 116.5 WXPSS81EV
Accessories
Wiring

54 Data is subject to errors and technical modifications.  New.

 Junction Boxes
Traditional, Maintenance Free, Downlighter, Adaptable

Maintenance Free Junction Box

Characteristics:
- Complies with BS EN 60670-22.
- Suitable for use in inaccessible areas.
- Spring fit terminals do not relax over time.
- Four separate cable terminations per connector.
- Comes complete with incoming and outgoing cable clamps.
- Junction box selection chart see page 61.
J804

Description Terminal capacity Pack qty. Cat ref.

Maintenance Free 32A - 3 Terminals 4 x 4mm² x (0.5 - 4.0) 10 J803
Maintenance Free 20A - 4 Terminals 4 x 4mm² x (0.5 - 4.0) 10 J804

Downlighter Junction Box

Characteristics:
- Comes complete with incoming and outgoing cable clamps to prevent strain on terminations.
- Three plate terminals with separate terminals for flexible cords.
- Complies with BS EN 60670-22.
- Fits through a 58mm diameter hole.
- 3 plate terminal style with captive terminal screws.
- Separate terminals for flexible cords.
- Current rating: 16 Amp.
- Junction box selection chart see page 61.
J501
Description Terminal capacity Pack qty. Cat ref.
Downlighter Junction Box 3 x (3 x 1.5mm²) 10 J501
1 x (2 x 1.5mm²)

Traditional Junction Box

Characteristics:
- Complies with BS EN 60670-22.
- Slot terminals are ideal for taking spurs off uncut ring or loop circuit cables.
- Solid machined brass terminals.
- Junction box covers secured by single centre screws.
- Junction box selection chart see page 61.

Description Terminal capacity (mm2) Pack qty. Cat ref.

Knockout Slot Terminal Junction Box 20A 4 Terminal 3 x 1.5 10 J201
Selective Entry Slot Terminal Junction Box 20A 4 Terminal 3 x 1.5 10 J301 J201
Selective Entry Slot Terminal Junction Box 30A 3 Terminal 4 x 2.5 10 J401
Selective Entry Slot Terminal Junction Box 20A 6 Terminal 3 x 1.5 10 J601

Junction / Adaptable Box

Characteristics:
- Junction box cover secured by two screws
- Accepts 16mm x 16mm and /or 16mm x 25mm mini-trunking.
- Junction box selection chart see page 61.

Description Terminal capacity Pack qty. Cat ref.

No Terminals - 10 J701
Accessories
Wiring

Data is subject to errors and technical modifications.  New. 55

 Ceiling Accessories
Safety Lampholders, Safety Pendants

Safety Lampholders

Characteristics:
- Complies with BS EN 7895.
- T2 heat resistance rating: 210ºC.
- Automatically disconnect power at the contacts when the lamp is removed.
- 50.8mm fixing centres for non-access versions. Use with mounting blocks MB326E/MT.
- Body angle of angled battens set at 30º.
- Access lampholders have integral RL624 ceiling rose base and heat resisting PVC tails.

Description Pack qty. Cat ref.

SEL212 Safety Bayonet Cap Cord Grip Lampholders

Cord Grip Lampholders - Short Skirt 20 SEL212

Safety Straight Batten Lampholders

Three Terminal - Home Office Shield 20 SEL354

Safety Access Batten Lampholders

Straight 2 Terminal Body, 3 Terminal and Earth Base - Home Office Shield 10 SEL96T
Angled 2 Terminal Body, 3 Terminal and Earth Base - Home Office Shield 10 SEL106T

Safety Access Batten Lampholder with Safety Cover

SEL354 Batten Lampholder with Safety Cover 10 SEL96TSC

SEL96T

Safety Pendants Sets with Access Ceiling Rose

Characteristics:
- Pendant set complies with BS EN 60598-1.
- Capacity of each terminal: 3 x 1.00mm² conductor.
- Barriers between terminals.
- Flexible pendant cord restraining hooks.
- Fixing centres 50.8mm.
- Feet on base to aid mounting on uneven surfaces.
- Three separate knockouts accept 1, 2 or 3 x 1.5mm2 conductors.
624SEL212/6 - Optional halo RL602.

Description Pack qty. Cat ref.

Safety Pendants Sets with Access Ceiling Rose
Pendant Set 6” - Short Skirt 10 624SEL212/6
Pendant Set 9” - Short Skirt 10 624SEL212/9
Pendant Set 12” - Short Skirt 10 624SEL212/12

Pendant Set with Access Ceiling Rose with Safety Cover

Pendant Set 6” with Safety Cover 10 624SEL212SC6
Accessories
Wiring

56 Data is subject to errors and technical modifications.  New.

 Ceiling Accessories
Safety Pendants

Super Access Terminal Bank Type Ceiling Rose

Characteristics:
- Capacity of each terminal: 3 x 1.00mm² conductor
- Common base with ‘access’ batten lampholders.
- Barriers between terminals.
- Flexible pendant cord restraining hooks.
- Fixing centres 50.8mm.
- Feet on base to aid mounting on uneven surfaces.
- Three separate knockouts accept 1, 2 or 3 x 1.5mm2 conductors.
- Optional halo RL602 (see below)

Description Dimensions Pack qty. Cat ref.

Three Terminals 81 Diameter x 26 10 RL624
(halo = 108mm diameter)

Mounting Blocks

Characteristics:
- Capacity of earth terminal for mounting blocks: 3 x 1.5mm².
- Cable knockout entries: MB326E/MT - centrally in base. Four on periphery will accept 16mm x 16mm or 16mm x 25mm
mini trunking.

Description Dimensions Pack qty. Cat ref.

Round Mounting Box with Earth Terminal 81 x 19 20 MB326E/MT
Round Surface Box 30mm Deep 84 x 30 10 MB2
MB326E/MT

Lampholder Skirts

Characteristics:
- Suitable for use with any lampholder or batten lampholder.

Description Pack qty. Cat ref.

Short Skirt 50 HAL70
Home Office Shield 50 HAL72

Halo

Description Pack qty. Cat ref.

Halo (108mm Diameter) 20 RL602

RL602

Accessories
Wiring

Data is subject to errors and technical modifications.  New. 57

 Sollysta
Mounting Box Selection

Product Standard Surface Deep Surface Box

Product Description
Reference Box Reference Reference
WMBTM BT Master Telephone Outlet WMPB1/28 WMPB1/46
WMBTS BT Secondary Telephone Outlet WMPB1/28 WMPB1/46
WMCC50 50A Cooker Control Unit WMPB2/46CC N/A
WMCC50N 50A Cooker Control Unit with LED Indicator WMPB2/46CC N/A
WMDP50N 50A Double Pole Switch 1 Gang with LED Indicator WMPB1/46 N/A
WMDP50VN 50A Double Pole Switch 2 Gang Vertical with LED Indicator WMPB2/46 N/A
WMDP84 20A Double Pole Switch WMPB1/28 WMPB1/46
WMDP84FO 20A Double Pole Switch with Flex Outlet WMPB1/28 WMPB1/46
WMDP84FON 20A Double Pole Switch with LED Indicator & Flex Outlet WMPB1/28 WMPB1/46
WMDP84N 20A Double Pole Switch with LED Indicator WMPB1/28 WMPB1/46
WMDP85FON 20A Double Pole Switch with LED Indicator & Flex Outlet Printed Water Heater WMPB1/28 WMPB1/46
WMDP85N 20A Double Pole Switch with LED Indicator Printed Water Heater WMPB1/28 WMPB1/46
WMDS1 1 Gang Dimmer WMPB1/28 WMPB1/46
WMDS2 2 Gang Dimmer WMPB1/28 WMPB1/46
WMDS3 3 Gang Dimmer WMPB2/28 WMPB2/46
WMDS4 4 Gang DImmer WMPB2/28 WMPB2/46
WMDX Double TV & FM/DAB CO-AX Socket Outlet WMPB1/28 WMPB1/46
WMP1 Single Blank Plate WMPB1/20 WMPB1/28
WMP2 Twin Blank Plate WMPB2/28 N/A
WMP2FO Flex Outlet Plate 20A WMPB1/20 WMPB1/28
WMP50FO Cooker Cable Outlet with Terminals WMPB1/46 N/A
WMPS11 10AX 1 Gang 1 Way Wall Switch WMPB1/20 WMPB1/28
WMPS12 10AX 1 Gang 2 Way Wall Switch WMPB1/20 WMPB1/28
WMPS12R Push Switch WMPB1/20 WMPB1/28
WMPS12RB Push Switch with Bell Symbol WMPB1/20 WMPB1/28
WMPS12W 10AX 1 Gang 2 Way Wall Switch Wide Rocker WMPB1/20 WMPB1/28
WMPS16 Intermediate Switch WMPB1/20 WMPB1/28
WMPS22 10AX 2 Gang 2 Way Wall Switch WMPB1/20 WMPB1/28
WMPS22W 10AX 2 Gang 2 Way Wall Switch Wide Rocker WMPB1/20 WMPB1/28
WMPS32 10AX 3 Gang 2 Way Wall Switch WMPB1/20 WMPB1/28
WMPS3PI 3 Pole Isolator Switch WMPB1/20 WMPB1/28
WMPS3PIF 3 Pole Isolator Switch with Fan Symbol WMPB1/20 WMPB1/28
WMPS42 10AX 4 Gang 2 Way Wall Switch WMPB2/28 WMPB2/28
WMQX Quadplexer TV & FM/DAB & SAT1 & SAT2 WMPB1/28 WMPB1/46
WMRJ11 RJ11 Socket WMPB1/28 WMPB1/46
WMRJ45 RJ45 Socket WMPB1/28 WMPB1/46
WMS51 5A 1 Gang Unswitched Socket WMPB1/28 WMPB1/46
WMS81 13A 1 Gang Unswitched Socket WMPB1/28 WMPB1/46
WMS82 13A 2 Gang Unswitched Socket Dual Earth WMPB2/28 WMPB2/46
WMSAT Single F Type Satellite Outlet Screened WMPB1/28 WMPB1/46
WMSO100 115/230V Shaver Outlet WMPB2/46 N/A
WMSS81 1 Gang Double Pole Switched Socket WMPB1/28 WMPB1/46
WMSS82 2 Gang Double Pole Switched Socket Dual Earth WMPB2/28 WMPB2/46
WMSS82O 2 Gang Double Pole Switched Outlet Outboard Rockers WMPB2/28 WMPB2/46
WMSSU83 13A Fused Connection Unit Switched WMPB1/28 WMPB1/46
WMSSU83FO 13A Fused Connection Unit Switched with Flex Outlet WMPB1/28 WMPB1/46
Accessories

WMSSU83FON 13A Fused Connection Unit Switched with LED Indicator & Flex Outlet WMPB1/28 WMPB1/46
WMSSU83N 13A Fused Connection Unit Switched with LED Indicator WMPB1/28 WMPB1/46
Wiring

WMSU83 13A Fused Connection Unit Unswitched WMPB1/28 WMPB1/46

WMSU83FO 13A Fused Connection Unit Unswitched with Flex Outlet WMPB1/28 WMPB1/46
WMTVF Single CO-AX TV Socket Outlet Female WMPB1/28 WMPB1/46
WMTVM Single CO-AX TV Socket Outlet Male WMPB1/28 WMPB1/46
WMTX TriplexerTV & FM/DAB & SAT Outlet WMPB1/28 WMPB1/46

58 Data is subject to errors and technical modifications.

 Sollysta
Terminal Capacities, Printed Products

Maximum number of conductors per terminal (Solid or Stranded conductors BS 6004)

Accessory Type Rating 1.0 mm2 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10.0 mm2 16.0 mm2

Plate & Ceiling Accessories 10AX 4 4 3 2 - - -

Dimmer Switches 10AX 4 3 - - - - -

BS 546 Socket Outlet 5A 3 3 3 2 2 - -

Shaver Socket 10A 3 2 1 - - - -

Fused Connection Units 13A - - 3 2 2 - -

BS 1363 Socket Outlets 13A - - 3 3 2 - -

BS546 Socket Outlet 15A - - 3 3 2 - -

Flex Outlet Plates 20A 5 4 3 2 2 - -

Double Pole Switches 20A - - 3 2 2 1 -

Double Pole Switches 45/50A - - - 3 2 1 1

Cooker Control Unit 45A - - - 3 2 1 1

Cooker Connection Outlet 45A - - - 2 3 - -

Grid Switches 20AX 4 4 3 2 - - -

Printed Products
Many of our Sollysta wiring accessories are available with printed options, such as Washing Machine, Dishwasher etc.

For a full list of products generally available from stock please go to www.hager.co.uk/printedproducts

We also offer a bespoke printing service for your individual requirements. Please contact our Sales Service Centre on 01952 675612 for further details.

Unique Safety Shutter

Socket outlets have apertures for plug pins and therefore will have a shutter
mechanism that prevents access to live parts unless the earth pin is also
present and has been inserted first. This however can be either intentionally or
inadvertently defeated by inserting something into the earth pin aperture.

All Sollysta sockets have a unique patented three pin shutter system that not
only requires the earth pin to be inserted first, but the simultaneous insertion
of the live and neutral pins as well, before the shutter mechanism is activated.
This enhances the safety by making it more difficult to defeat the mechanism
and therefore reducing the risk of electric shock.

Neutral Loop Terminal

Today it is increasingly likely that there is a decorative light fitting or even
L N L N L N
downlighters fitted in place of a standard pendant. These fittings are rarely
provided with a neutral loop terminal.

It has also become more popular to make the loop connection at the switch.
This has the advantage of the connections being accessible and at a more
convenient working height.
LOOP LOOP LOOP
However, this leaves the problem of terminating the neutral conductor.

One solution is to connect the neutral to a connector block inside the wall
box, which takes up extra space. Another is to use the Sollysta light switch
which has a unique neutral loop terminal.
Accessories
Wiring

Data is subject to errors and technical modifications. 59

 IP66
International Protection (IP) Chart

The IP rating for all low voltage enclosures up to 1000 V a.c. and 1500 V The second character numeral indicates the degree of protection provided
d.c. is defined in identical fashion by the standards EN 60529 - IEC 529. It by the enclosure with respect to harmful effects on the equipment due to the
comprises the letters IP followed by two character numerals and or additional/ ingress of water. An X signifies that the tests are not applicable to the product.
supplementary letters.

The first character numeral indicates the degree of protection

provided by the enclosure against access to hazardous parts by preventing or
limiting the ingress of a part of the human body or an object held by a person
and ingress of solid foreign objects.

The first character numeral: The second character numeral:

Protection against foreign objects Protection against ingress of water with harmful effects

IP Description IP Description

0 Non-protected 0 Non-protected

1 Protected against solid objects ≥ than 50mm 1 Protected against vertically falling water drops

Protected against vertically falling water drops

2 Protected against solid objects ≥ than 12.5mm 2
when enclosure titled up to 15°

3 Protected against solid objects ≥ than 2.5mm 3 Protected against spraying water

4 Protected against solid objects ≥ than 1.0mm 4 Protected against splashing water

5 Dust-protected 5 Protected against water jets

6 Dust-tight 6 Protected against powerful water jets

Protected against the effect of temporary

7
immersion in water

Protected against continuous immersion in

8
water

Additional letter (in option) Additional letter (in option)

Protection of people against access to hazardous parts Specific information on the product
Accessories

Description Description
Wiring

A Protected against access to hazardous parts with the H High voltage apparatus
back of the hand
M Motion during water test
B Protected against access to hazardous parts with a finger
S Stationary during water test
C Protected against access to hazardous parts with a tool
- ø 2.5mm W Weather conditions
D Protected against access to hazardous parts with a wire
- ø 1mm

60 Data is subject to errors and technical modifications.

 Junction Boxes
Selection Chart

Junction Box Selection Chart

Is the location Yes Is there a suitable Yes Traditional Junction

accessible? fixing position? Boxes Acceptable
No No

Maintenance Free Cable Clamping

Terminals Required Recommended

Description No of Terminals Terminal Rating Reference Benefits / Considerations

3 x 3 x 1.5mm 2
Provided with cable clamps and
Downlighter Junction Box 16A J501
1 x 2 x 1.5mm2 separate terminals for flex
3 x 4 x (0.5-4.0mm2) 32A J803 Suitable for use in inaccessible
Maintenance Free Junction Box
4 x 4 x (0.5 - 4.0mm2) 20A J804 locations

4 20A J201
4 20A J301 Acceptable for locations which are
Traditional Junction Boxes
3 30A J401 accessible

6 20A J601

Accessories
Wiring

Data is subject to errors and technical modifications. 61

 Notes
Accessories
Wiring

62 Data is subject to errors and technical modifications.

 Notes

Accessories
Wiring

Data is subject to errors and technical modifications. 63

Hager Ltd.
Hortonwood 50
Telford
Shropshire
TF1 7FT

Sales Service Centre: 01952 675612

Technical Service Centre: 01952 675689

hager.com/uk
[email protected]
[email protected]

Wiring Accessories
May 2021