Union MV Mo Union RV 71

Flux cored wire Flux cored wire

Classifications EN 758 EN 12071 AWS A 5.28 Classifications EN 758 AWS A 5.20

T 46 2 Mo M M 2 H 5 T Mo M M 2 H5 E80C-G H4 T 42 2 P M 1 H5 E71T-1MJH4
T 42 2 P C 1 H5 E71T-1H4
Characteristics Union MV MO is a molybdenum-alloyed wire with metal powder Characteristics Union RV 71 is a rutile flux cored wire with fast freezing
and field of use filling, suited for welding on creep resistant boiler, pressure ves- and field of use slag for all-position welding, according to EN 439, when using
sel and pipe steels with high creep and stress strength up to mixed gas M21, M33 and C1. It shows good mechanical-
500 °C (932 °F). technological properties. The outstanding welding properties
It is applicable in positions PA, PC, PF, PB, when using mixed are a stable arc, good modelling characteristic, very low spatter
gas M21 according to EN 439. It provides very low oxide build- proportion, finely rippled and notch free weld interface, and
up, stable and smooth arc, smooth droplet transfer and safe good slag detachability.
penetration. It is excellent suited for manual and mechanized, Due to the fast freezing slag out-of-position welding with increa-
single and multilayer welding. sed current is possible for manual as well as for mechanized
welding. Root weldability is proved on ceramic backing bar.
Materials Pressure vessel steels P235GH, P265GH, P295GH, P355GH,
P460NH, 16Mo3 and corresponding TM-grades; Materials S185, S235JR, S275JR, S355JR, P235GH, P265GH, P295GH,
X52, cast steel GS-52, G20Mo5 and others, P355GH, S275N - S355N; P275NH - P355NH; L210 - L360;
fine-grained structural steels up to S460N; X 42 - X 52 (API-5 LX); GS-38 - GS-52; shipbuilding steels
pipe steels L210 - L450MB grade A - E, AH32 - EH36, A40 - F40.
(X42-X65) and according TM steels up to 445.7TM
Typical analysis C Si Mn P S Gas
in % 0.06 0.5 1.4 ≤ 0.025 ≤ 0.025 M21
Typical analysis C Si Mn P S Mo Gas
in % 0.06 0.35 1.0 <0.015 <0.015 0.5 M21
Mechanical proper- Heat Shielding Yield strength Tensile Elongation Impact values
treatment gas 0.2% strength (L0=5d0) in J CVN
ties of the weld
N/mm2 N/mm2 % 0°C -20°C -40°C
Mechanical proper- Heat Shielding Yield strength Tensile Elongation Impact values metal according
treatment gas 0.2% strength (L0=5d0) in J CVN AW M21 420 520 24 140 110 47 27
ties of the weld 2 to EN 1597-1
N/mm N/mm2 % -10°C
metal according (min. values at RT)
to EN 1597-1 AW M21 490 560 22 100 47
(min. values at RT) 620°C/15h M21 480 550 22 100 47
Welding position Polarity = +
Shielding gas (EN 439) M21, M33 and C1,
Polarity = + Consumption: 12 - 18 l/min.
Welding position
Shielding gas (EN 439) M21,
Consumption: 12 - 18 l/min. Approvals TÜV (Certificate No. 7185) DB (Certificate No. 42.132.32)
GL, ABS, Controlas, UDT, LR, DNV

Approvals TÜV (Certificate No. 7838) UDT

Packaging, weights Diam. (mm) Spool Weight / kg Amperage Volts
DB (Certificate No. 42.132.36)
and amperages 1.0 B300 16 130-270 21-30
1.2 B300 16 150-300 22-32
Packaging, weights Diam. (mm) Spool Weight / kg Amperage Volts 1.4 B300 16 150-350 23-32
and amperages 1.2 B300 16 120-300 17-32 1.6 B300 16 180-375 24-33
1.6 B300 16 200-400 20-34 Other diameters and spools upon request
410 Böhler Schweisstechnik Deutschland GmbH – 09_2005 Böhler Schweisstechnik Deutschland GmbH – 09_2005 411