MATERIAL SAFETY DATA SHEET Page 1 of 5
KALAM LEVERAGE MULIA
PRINT DATE: 23 January 2019
KALVACHEM 1430 (PAC)
1. CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Product name
KALVACHEM 1430 (PAC)
Company
KALAM LEVERAGE MULIA
Telephone number: +62 (031) 8941773
Fax: +62 (031) 8941773
Email:
[email protected] 2. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name / Synonym Poly Alumunium Chloride
Hazardous Ingredients This product is not classified as
3. HAZARDS IDENTIFICATION
Potential Health Hazard
Inhalation : May irritation to mocuos membranes
Ingestion : May irritation to the mount and stomach
Skin : May cause irritation, especially after prolonged contact
Eyes : May cause irritation, especially after prolonged contact
Sub Chronic Effects : No data available
Chronic Effects : None known
4. FIRST AID MEASURES
Eyes and Face : Immeditely flush with water for 15 minutes. Get medical attention irritation
occurs
Skin : Remove all contaminated clothing. Flush with plenty of water. If irritation
persists, get medical attention
Inhalation : Remove to fresh air. Apply artificial respiration and get medical attention if
needed
Ingestion : Do not induce vomiting. Get medical attention immediately. Never give
anything by mouth to an unconscious person
Update on January 07, 2017
MATERIAL SAFETY DATA SHEET Page 2 of 5
KALAM LEVERAGE MULIA
PRINT DATE: 23 January 2019
KALVACHEM 1430 (PAC)
5. FIRE – FIGHTING MEASURE
Fire Hazards : None Known
Explosion Hazards : None Known
Fire Extinguishing Agents Recommended : Foam, Carbon dioxide or dry chemicals
Special Protective Equipment for fire fighting : In case of fire, wear a full-face positivefighting
pressure selfcontained breathing apparatus and protective suit.
6. ACCIDENTAL RELEASE MEASURES
Cleaning Methode : Collect the product for an enentual re-use or for waste
Personal Precautions : Wear protective overalls, chemical splash goggles and
impervious gloves
Enviromental Precautions : N/A
7. HANDLING AND STORAGE
Handling : Avoid contact with oxidizing agent and foodstuff. Prevent severe overheating as
overheating. May produce hydrogen chloride gas
Storage : Store in a cool place out of direct sunlight. Store in well ventilated area.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Respiratory Protection : If misty conditions are encountered, wear NIOSH approved
respirator
Eyes and Face : Wear Goggles
Hands, Arms and Body : Rubbe gloves and fully work clothing
Other clothing and Equipment : Eye wash and quick drench shower
Work/Hygiene Practices : Wash hands before eating, drinking or smoking
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Light Yellow Powder
pH : (1 % Solution) 3.0 - 5.0
Basicity (%) : 60 - 80
Al2O3 (%) : 29 - 30
Water Insoluble (%) : ≤ 0. 1
Update on January 07, 2017
MATERIAL SAFETY DATA SHEET Page 3 of 5
KALAM LEVERAGE MULIA
PRINT DATE: 23 January 2019
KALVACHEM 1430 (PAC)
10. STABILITY AND REACTIVITY DATA
Hazardous Reactions No one in particular if used correctly.
Hazardous Decomposition Products N/A
11. TOXICOLOGICAL INFORMATION
No available information
12. ECOLOGICAL INFORMATION
Ecotoxicity Not available
Environmental fate No Data
13. DISPOSAL CONSIDERATIONS
Recover the product if possible.
AW; LKGMAP’
Operate SBOJGOP
according to local $
regulations
14. TRANSPORT INFORMATION
Road (RID/ADR) : Not hazardous
Rail (RID) : Not hazardous
Air (ICAO/IATA) : Not hazardous
MARINE(IMO/IMDG : Not hazardous
15. OTHER REGULATORY INFORMATION
GB 15892- 2003，Water Treatment Chemical- Poly Aluminium Chloride
16. OTHER INFORMATION
The information contained herein is offered only as a guide to the handling of this specific material and has
been prepared in good faith by technically knowledgeable personnel. It is not intended to be all inclusive
and the manner and conditions of use and handling may involve other and additional considerations. No
warranty of any kind is given or implied and gongyi yuqing water purifying materals Co.,Ltd. Will not be
liable for any damages, losses, injuries or consequential damages which may result from the use of or
reliance on any information contained herein.
Update on January 07, 2017
