RHEOLATE® 212
Associative Thickener for High Shear-Rate Viscosity Build in Water-Borne Systems
GENERAL INFORMATION
RHEOLATE 212 is a 20 % solids, VOC-free APPLICATIONS
Enhanced Performance Through Applied Innovation
polyether polyurethane associative flow modifier for
aqueous applications. It is designed for use in latex High quality, low VOC latex paints
paints and other waterborne systems including inks, High-gloss interior and exterior latex paints
textile coatings, adhesives and sealants where Semi-gloss interior and exterior latex paints
maintaining viscosity at high shear during product
application and improved film levelling are required. Waterborne alkyd latex paints
RHEOLATE 212 can be used alone with small Other latex systems requiring high film build and
particle size latex systems or in combination with a improved flow and levelling
co-thickener such as RHEOLATE 655 or Inks
RHEOLATE 666 if higher mid-shear (package)
viscosity is required. Adhesives
RHEOLATE 212 has shown more efficient Textile coatings
high-shear viscosity development and improved flow
and levelling in the newer VOC-free gloss and KEY PROPERTIES
semi-gloss systems than most other viscosity VOC-free
modifiers.
Superior spatter resistance
Low shear
viscosity
Good colour acceptance
Bio-stable
Roller spatter High shear
pH independent
resistance viscosity Pourable liquid for easy addition
Compatible with other thickeners
Does not detract from gloss or wet adhesion
Flow and Anti-settling
Levelling behaviour INCORPORATION
RHEOLATE 212 can be used as supplied or, if
Sag resistance necessary, further diluted with water. Addition can
0= low/poor 5= high/excellent
take place at any time during the formulation
manufacturing process but incorporation into the
millbase before letdown is recommended.
CHEMICAL & PHYSICAL PROPERTIES RHEOLATE 212 additive can be combined with
translucent Off-White to other associative rheological additives, clay based
Appearance thickeners or cellulosic thickeners for higher package
White Liquid
viscosity and improved sag control.
Active solids 20 %
Total solids 20 % RHEOLATE 212 is an associative rheological
additive and is generally more efficient as the particle
Brookfield Viscosity < 6,000 (Brookfield RVT,
size of the latex decreases. This is due to the
cps spindle 4, 20 rpm, 25 °C) increased surface area of such latexes. It is
Specific Gravity 1.03 important to assess the effectiveness of RHEOLATE
Solvent water 212 in the complete system, while performance is
These are typical properties not to be used for specification also affected by other raw ingredients.
purposes.
continued…
www.elementis.com
RHEOLATE® 212
Enhanced Performance Through Applied Innovation
LEVELS OF USE SHELF LIFE
Typical use levels of RHEOLATE 212 are 0.5 % to RHEOLATE 212 has a shelf life of 2 (two) years from
5 % (thickener solids weight) on total system weight. date of manufacture.
HEALTH AND SAFETY QUALITY ASSURANCE
Before using this product please consult our Safety Since 1992 the company is a holder of the ISO 9001
Data Sheet (SDS) for information on safe handling / ISO 9002 certificates, which guarantees that all
and storage. The SDS can be found on the company operations are conducted according to the stipulated
website. standards.
STORAGE RECOMMENDATIONS
RHEOLATE 212 should be kept above 4 °C (40 °F).
In the event of accidental freezing, thaw gently,
spread a portion between glass slides and examine
for granules. If found, do not use.
NOTE: The information herein is currently believed to be accurate. We do not guarantee its accuracy. Purchasers shall not rely on statements herein when
purchasing any products. Purchasers should make their own investigations to determine if such products are suitable for a particular use. The products
discussed are sold without warranty, express or implied, including a warranty of merchantability and fitness for use. Purchasers will be subject to a separate
agreement which will not incorporate this document.
© Copyright 2018, Elementis Specialties, Inc. All rights reserved. Copying and/or downloading of this document or information therein for republication is not
allowed unless prior written agreement is obtained from Elementis Specialties, Inc.
® Trademark of Elementis Specialties, Inc. V01 Aug. 2018
North America Europe Asia
Elementis Elementis UK Ltd. Deuchem (Shanghai) Chemical Co., Ltd.
469 Old Trenton Road c/o Elementis GmbH 99, Lianyang Road
East Windsor Stolberger Strasse 370 Songjiang Industrial Zone
NJ 08512, USA 50933 Cologne, Germany Shanghai, China 201613
Tel.: +1 609 443 2500 Tel.: +49 221 2923 2066 Tel.: +86 21 5774 0348
Fax: +1 609 443 2422 Fax: +49 221 2923 2011 Fax: +86 21 5774 3563
www.elementis.com
