UPGRADE YOUR DRILLING
INTELLIGENCE TO A NEW LEVEL
DD422i/DD422iE AUTOMATION UPGRADE
Scan to see
the video.
SANDVIK HSI CRUSHERS 1
DD422i/DD422iE
AUTOMATION UPGRADE
Continuous 24/7 underground mine Downtime during shift changes, blasting and
development is becoming an industry ventilation times are no longer acceptable
standard. Our Sandvik automation upgrade reasons for keeping a drill out of production
packages for Sandvik DD422i and Sandvik while its operator is away.
DD422iE development drills help you keep
up with the round-the-clock demands. Our upgrade consists of three individual
elements designed to boost your
productivity and enhance operator safety
and ergonomics.
Up to 30* Up to 50%* Up to 18*
fewer minutes productivity times more
of operator’s time per increase compared to drilled meters without leaving
round spent in a potentially current industry the cabin for manual bit
hazardous drilling area benchmark change
IMPROVE PRODUCTION OPTIMIZED
SAFETY PERFORMANCE PROCESS
75 holes per round, average bit life 5 holes, Teleremote drilling enables more reliable perimeter
2 minute average time to change the bit and bottom holes while the unit is unmanned
manually in the front of drill
TELEREMOTE DRILLING:
The advanced and portable drilling control
is a reliable and easy way to control the unit
drilling operations from a remote location.
INCREASED PRODUCTIVITY by drilling
additional holes at the perimeter and
bottom areas while the unit is unmanned
IMPROVED SAFETY via less operator
exposure to underground conditions
REDUCED EQUIPMENT DAMAGE
thanks to better control of unit behavior
while drilling unmanned
2 DD422i / DD422iE AUTOMATION UPGRADE
DRILL BIT CHANGER:
A Sandvik patented drill bit changer further
improves drilling productivity, allowing the
operator to drill a full round without leaving
the cabin to change the bit manually.
ADDED PRODUCTIVITY
without dependence on bit life while drilling
from a remote location
IMPROVED OPERATOR SAFETY AND
COMFORT by reducing the need to enter/
exit the cabin
IMPROVED SAFETY by limiting the time
the operator spends in front of the drill in
potentially hazardous areas
BOOM COLLISION AVOIDANCE
SYSTEM:
BOOM 1 BOOM 1
BOOM 1
BOOM 2
The new boom collision avoidance system
BOOM 2
BOOM 2 ANTI COLLISION WARNING
Stop of all movements
Stop of production
improves the reliability of automatic boom
movements by identifying the possible
STANDARD SYSTEM
collision risks with another boom or carrier.
Based on dynamic route recalculation the
system not only helps to avoid collisions but
helps maintain production rates.
ANTI COLLISION WARNING
Route recalculation starts
COLLISION AVOIDED
Production continues
REDUCED BOOM DAMAGES
BOOM 1 BOOM 1 BOOM 1
BOOM 2 by reducing boom collision risk
INCREASED PRODUCTIVITY
BOOM 2
BOOM 2
BOOM COLLISION AVOIDANCE SYSTEM by improving the reliability of automatic
boom movements
DD422i / DD422iE AUTOMATION UPGRADE 3
ROCKTECHNOLOGY.SANDVIK
B2-1151ENG©Sandvik Mining and Rock Technology 2018 SANDVIK is trademarks
owned by the Sandvik group of companies. Strömberg, 2018
*Test results and calculations are to be considered as results reached under certain
and controlled conditions. These test results and calculations should not be treated as
specifications and Sandvik does not guarantee, warrant or represent the outcome of
test results or calculations in any or all circumstances.
