PRODUCT DATA SHEET
SikaPlast®-2009 NS
WATER REDUCING HIGH EFFICIENT SUPERPLASTICIZER
DESCRIPTION CHARACTERISTICS / ADVANTAGES
SikaPlast®-2009 NS A highly effective high range water SikaPlast®-2009 NS is a powerful superplasticiser
reducing agent and superplasticizer for free flowing based on advanced technology which gives the follow-
concrete. ing advantages:
▪ High water reduction
USES ▪ Higher strength and density
▪ Improved cohesion properties
SikaPlast®-2009 NS a superplasticizer for free flowing ▪ Improved durability
concrete in floor, slabs, foundations, slender compon- ▪ Improved water tightness
ents with dense reinforcement, walls, columns, pave-
ments and other structural and non structural ele- APPROVALS / STANDARDS
ments.
Specially recommended for the following types of con- IS 9103, ASTM C494
crete:
▪ High performance concrete
▪ Ready mix concrete
▪ Site batched concrete
PRODUCT INFORMATION
Chemical Base Modified Polycarboxylate
Packaging 255 kg HDPE carboy or Tanker supply
Appearance / Colour Light Brown Liquid
Shelf Life 12 months from date of production if stored properly in undamaged un-
opened, original sealed packaging.
Storage Conditions Store in dry conditions at temperatures between +10°C and +40°C. Protect
from direct sunlight and frost.
Density ~1.06 kg/l at 25°C
pH-Value ≥6
Product Data Sheet
SikaPlast®-2009 NS
November 2018, Version 01.01
021301011000002835
1/2
APPLICATION INFORMATION
Recommended Dosage 0.2% to 2.0% by weight of cement .Higher dosage may be used if agreed by
engineer and consultant
Actual dosage to be finalised on the basis of site trials. Stir well before use.
Compatibility SikaPlast®-2009 NS may be combined with many other Sika® products.
Compatible with all types of cement and cementitious material.
Important: Always conduct trials before combining products in specific
mixes and combinations.
APPLICATION INSTRUCTIONS LOCAL RESTRICTIONS
DISPENSING ECOLOGY, HEALTH AND SAFETY
SikaPlast®-2009 NS can be added into the mixing wa- For information and advice on the safe handling, stor-
ter or directly into the concrete mixer after 50 – 70% age and disposal of chemical products, users shall refer
of the mixing water has been added. to the most recent Material Safety Data Sheet contain-
The addition of SikaPlast®-2009 NS to dry aggregate or ing physical, ecological, toxicological and other safety-
cement is not recommended. related data.
To achieve optimum performance a minimum wet
mixing time, which is depending on the mixing condi-
tions and the mixer performance, of 60 seconds is re- LEGAL NOTES
commended. The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
LIMITATIONS products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
Excessive water addition or overdosing may cause properly stored, handled and applied under normal
bleeding or segregation. conditions in accordance with Sika's recommenda-
If frozen and / or if precipitation has occurred, Sika- tions. In practice, the differences in materials, sub-
Plast®-2009 NS may be used after thawing slowly at strates and actual site conditions are such that no war-
room temperature and after intensive mixing. ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
BASIS OF PRODUCT DATA legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
All technical data stated in this Product Data Sheet are mendations, or from any other advice offered. The
based on laboratory tests. Actual measured data may user of the product must test the product’s suitability
vary due to circumstances beyond our control. for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
be supplied on request.
Sika India Pvt. Ltd.
620, Diamond Harbour Road
Commercial Complex II
Kolkata - 700 034
Tel : +91 33 24472448
Fax : +91 33 23978688
Mail :
[email protected] SikaPlast-2009NS-en-IN-(11-2018)-1-1.pdf
Product Data Sheet
SikaPlast®-2009 NS
November 2018, Version 01.01
021301011000002835
2/2
