Scribd
Upload
136 views3 pages

Geodesmo-50: Low Viscosity, Fast Curing, Polyurethane Based All-Purpose Primer

GEODESMO-50 is a one component, fast curing polyurethane primer that can be used on porous and non-porous substrates. It has low viscosity and cures more quickly than similar products, making it suitable for colder climates and unpredictable weather. The primer adheres well to surfaces and allows application of further coatings once cured.

Uploaded by

Gizem D.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
136 views3 pages

Geodesmo-50: Low Viscosity, Fast Curing, Polyurethane Based All-Purpose Primer

GEODESMO-50 is a one component, fast curing polyurethane primer that can be used on porous and non-porous substrates. It has low viscosity and cures more quickly than similar products, making it suitable for colder climates and unpredictable weather. The primer adheres well to surfaces and allows application of further coatings once cured.

Uploaded by

Gizem D.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

alchimica.

com

Page 1/3

GEODESMO-50

Low viscosity, fast curing, polyurethane based all-purpose


primer

DESCRIPTION FEATURES & BENEFITS


Geodesmo-50 is a one component, fast curing  One component.
polyurethane based primer suitable for all  Fast Curing
substrates. It can be used successfully on both  Of low viscosity.
porous or non- porous substrates.  Easily applied, even on wet concrete.
It is very similar in viscosity and wetting ability as  Excellent wetting, impregnation and paint-over
MICROSEALER 50 but has an increased curing time.
speed which allows it to be used more  Elastic.
successfully in colder climates and when rain is
not very predictable. It is the preferred option in APPLICATION PROCEDURE
cases of extreme porosity in concrete surfaces Clean the surface using a high pressure washer, if
where multiple coats of MICROSEALER 50 may be possible. Remove oil, grease and wax
required. contaminants. Cement laitance, loose particles,
Additionally, it can be effectively used on both dry mould release agents, cured membranes must
and wet concrete, even green concrete, not only also be removed.
as primer but also as a low-cost sealing solution,
increasing, thus, the durability of the substrate. Thinning:
In order to reduce the chance of bubble formation
Apply with brush or roller. and to help keep consumption below 500 gr/m2,
Consumption: Application:
On concrete 100-500 gr/m2, subject to substrate Apply with brush or roller. Once cured, the main
porosity. membrane (e.g. HYPERDESMO® System) can be
applied.
RECOMMENDED FOR
To be used as primer for: CONSUMPTION
Concrete:100-500 gr/m2, subject to substrate
 Humid, damp or wet concrete, porosity.
 Faster curing version of MICROSEALER 50
CLEANING
Due to the very high strength of adhesion of
LIMITATIONS GEODESMO-50, avoid staining surrounding areas.
Clean tools and equipment first with paper and
then using SOLVENT-01. Rollers will not be re-
usable.
Will discolor when used on its own
exposed. This is purely visual and does not affect
the performance of the membrane.

Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & OHSAS 18001.
GEODESMO-50/EE/01-03-16
alchimica.com

Page 2/3

GEODESMO-50

PACKAGING
1 Lt, 4 Lt, 20 Lt and drums. SAFETY INFORMATION
GEODESMO-50 contains solvents. Appply in well-
SHELF LIFE ventilated, no smoking areas, away from naked
Can be kept for 12 months minimum in the flames. In closed spaces use ventilators and
original unopened pails in dry places and at carbon active masks. The M.S.D.S. (Material
temperatures of 5-25 oC. Once opened, use as Safety Data Sheet) is available on request.
soon as possible.

TECHNICAL SPECIFICATIONS
In liquid form (before application):

PROPERTY UNITS METHOD SPECIFICATION

Viscosity (Brookfield) cP ASTM D2196-86 @ 25 oC 150-250

ASTM D1475 / DIN 53217 / ISO


Specific weight gr/cm3 0.98
2811 @ 20 oC

In cured form (after application):

PROPERTY UNITS METHOD SPECIFICATION

Tensile strength at Kg/cm2 350


ASTM D412 / EN-ISO-527-3
break @ 23 oC (N/mm2) (35)

Elongation @ 23 oC % ASTM D412 / EN-ISO-527-3 > 150

Dry to touch:
 On DRY cement hours - 1-2
 On WET cement 1
Application of main
hours - 24 – 48
membrane

Adhesion to cement mPa ASTM D1640 >4

Adhesion of
HYPERDESMO® to mPa ASTM D1640 >5
GEODESMO PRIMER

Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & OHSAS 18001.
GEODESMO-50/EE/01-03-16
alchimica.com

Page 3/3

GEODESMO-50

NONE OF OUR PUBLISHED INSTRUCTIONS AND SPECIFICATIONS,


IN WRITING OR OTHERWISE, ARE BINDING EITHER IN GENERAL
OR WITH RESPECT TO ANY THIRD PARTY RIGHTS, OR DO THEY
RELIEVE INTERESTED PARTIES OF THEIR DUTY TO SUBJECT THE
PRODUCT TO AN ADEQUATE EXAMINATION OF ITS SUITABILITY.
IN NO EVENT WILL ALCHIMICATM S.A. BE RESPONSIBLE FOR
DAMAGES OF ANY NATURE, WHATSOEVER, RESULTING FROM THE
USE OF OR RELIANCE UPON INFORMATION OR THE PRODUCT TO
WHICH INFORMATION REFERS.

Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & OHSAS 18001.
GEODESMO-50/EE/01-03-16

You might also like