Scribd
Upload
866 views1 page

Technical Data Sheet: Complete Solution For Insulations

This technical data sheet provides information on "Shreerock" rock wool slabs. The slabs are made from processed silicious rocks in a fibrous form. Key parameters specified include a density of 64 kg/m3, a maximum service temperature of 600°C, and thermal conductivity between 0.38-0.064 W/(m.K) depending on temperature. The slabs have dimensions of 1000mm x 500mm x 50mm thickness and meet various Indian standards for properties such as moisture absorption, combustibility, and noise reduction coefficient.

Uploaded by

jagan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
866 views1 page

Technical Data Sheet: Complete Solution For Insulations

This technical data sheet provides information on "Shreerock" rock wool slabs. The slabs are made from processed silicious rocks in a fibrous form. Key parameters specified include a density of 64 kg/m3, a maximum service temperature of 600°C, and thermal conductivity between 0.38-0.064 W/(m.K) depending on temperature. The slabs have dimensions of 1000mm x 500mm x 50mm thickness and meet various Indian standards for properties such as moisture absorption, combustibility, and noise reduction coefficient.

Uploaded by

jagan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Technical Data Sheet: Provides comprehensive specifications and standards for Shreerock Rock Wool Slab detailing parameters such as density, moisture absorption, and chemical composition.

Technical Data Sheet

“SHREEROCK”ROCK WOOL SLAB


Product Description Shreerock” Mineral Wool Slabs is made out from composition of Silicious
rocks which is processed from molten stage to fibrous form.
Parameter Performance Standard Norms
Density 64 kgs/m3 IS 8183

Maximum Service Temperature 600 O C IS 8183

Thermal Conductivity Avg. Temp.OC 25 50 100 150


IS 8183
W/(m.K )o 0.38 0.043 0.052 0.064
Non Fibrous Content (Shot Content) > 250 micron - 15 % Max IS 8183
> 500 micron - 5 % Max
Moisture Absorption 2.0 % Max ( By Weight ) IS 8183

Moisture Content 2.0 % Max ( By Weight ) IS 8183

Dimensions Length : 1000 mm


Width : 500 mm IS 8183
Thickness : 50 mm
Combustibility Incombustible Loss in Weight 5.0 % Max IS 8183
( Incombustible as per BS 476 Part 4 )
( Smoke Density as per ASTM E 662 )
Leachable Chloride Content 0.1% Max . IS 8183
Sulphur Content 0.6 % Max IS 8183
Resistance to Vibration Settlement 1.0 % Max IS 8183
Resistance to Jolting Settlement 3.0 % Max IS 8183
Alklanity pH 7 to 10 IS 8183

Compressibility & Resilience 90 % Minimum IS 8183


Noise Reduction Coefficient 0.90 for Density 64 Kgs/m3 ASTM C423
0.93 for Density 96 Kgs/m3 (TESTED AT ARAI PUNE )

Linear Shrinkage
( After Soaking Heat at Max. Use of 2 .0 % Max IS 8183
Temperature )
Free Alkalis Content 0.02 % Max IS 8183
Compaction factor during erection - IS 8183
Facing NIL

Packing Packed in Polythene Lined HDPE Bags


Standard Compliance Confirming to IS 8183
DOC NO : SEPL/RBS/20-21/IS /03 DATE OF ISSUE : 22nd Dec 2020

POSTAL ADDRESS: OPP. BANK OF BARODA,GANJPARA, DURG – 491001, CHHATTISGARH, INDIA


FACTORY ADDRESS : PLOT NO 131 -136 , 142-146 , RASMADA INDUSTRIAL AREA , DURG CHHATTTIGARH , INDIA
PHONE : +91-788-2617250, E-MAIL : [email protected], WEBSITE : www.shreeramequitech.com

Complete Solution for Insulations

You might also like