NEEDLE

ROLLER BEARINGS www.ntn-snr.com

The reference range made in Japan With You
NTN-SNR
The strength of a group

NTN Corporation, one of the world leaders in bearings, specialized particularly in the design,
development and production of needle roller bearings and rollers.

With NTN-SNR BEARINGS, benefit from this know-how near you with:

•A very wide range of needle roller bearings, rollers and components

• An undisputed leader in Japan for industrial applications

• More than 50 years of experience in design and production of these products

•T he systematic search for excellence, manifested by a high level of performance and

exceptional quality
•E xtended service life and unfailing reliability, as recognised by thousands

of customers who use them worldwide

Globally, NTN Corporation is an expert in product life cycle management,

and is typified by the accessibility and commitment of its teams.

NTN-SNR ACCOMPANIES YOU

ON THE ROAD TO RELIABILITY AND PERFORMANCE

With You 2
CONTENTS
Reference range made in Japan 4

Sectors of activity and applications 6

Pre-selection guide 12

Selection guide 13

Product range presentation

Needle roller and cage assemblies 16

Needle roller and cage assemblies
17
for connecting rod assemblies

Drawn cup needle roller bearings 18

Needle roller bearings with solid rings 20

Needle roller bearings with separable solid rings 22

Inner rings 23

Combined bearings 24

Thrust bearings 26

Roller followers 28

Cam followers 30

Components: Needles/Stop segments/Sealing rings 33

Technical summary 34

3 With You
The reference range made in Japan
Premium quality at your doorstep

NTN HAS THE BEARING YOU NEED

THE WIDEST OFFER ON THE MARKET

•N
 eedle roller and cage assemblies
•D
 rawn cup needle roller bearings
•N
 eedle roller bearings with solid rings
•C
 ombined bearings
•C
 am followers and cam followers on shafts
•N
 eedle roller thrust bearings
•C
 omponents

A KNOW-HOW MADE IN JAPAN

NTN, THE No. 1 FOR NEEDLE ROLLER BEARINGS AND ROLLERS IN JAPAN
With 100 % Japanese mastery, from design to production, NTN has products
tested by the biggest names in the global industry for over 50 years.

RECOGNISED PREMIUM QUALITY

OUR STEEL SELECTION MAKES THE DIFFERENCE

By opting for superior steel quality, combined with a design that is ultra-compact,
rigid and withstands heavy radial loads, NTN offers bearings with increased service
life of up to 3 times compared to the standard ones.

With You 4
A PRODUCT AVAILABILITY CLOSER TO YOU

EUROPEAN STOCK FOR SHORT DELIVERY TIMES

NTN-SNR has a stock of over 2,000 references in European stock to provide excellent
availability. In addition, there is a centralised global stock in Japan. Search for the
availability of our products in real time via our E-Shop portal.
( eshop.ntn-snr.com )

SERVICE AND SUPPORT AT YOUR DOORSTEP

TECHNICAL SUPPORT BASED IN EUROPE TO ASSIST YOU

Customised studies, recommendations for your specific applications, Experts &
Tools training, our NTN-SNR experts are there to support you.

Our on-line tools:

•C
 ROSS REFERENCES
•T
 ECHNICAL DATA SHEETS
•P
 LACING ORDERS

Check out our video

5 With You
NEEDLE ROLLER BEARINGS ARE ESSENTIAL
ON A DAILY BASIS AND IN NUMEROUS SECTORS OF ACTIVITIES
AND APPLICATIONS.
Wherever compactness is required, where reliability and durability requirements are
strong, NTN has the solution in its needle roller bearings offering. With more than
320 million units produced each year, working together with original equipment
manufacturers (OEMs) for more than 50 years, NTN has acquired this know-how
which are benefiting thousands of customers today.

With You 6
 MOTORISED PORTABLE TOOLS
CHAINSAW
The extreme requirements of this application are reflected in the natural qualities of
NTN needle roller bearings: compactness, high load capacity, resistance to overheating
(motor) and poor lubrication.
NTN is the preferred supplier of the world’s leading professional chainsaws.

ENGINE 1  : CAGE H

o In the development of engines, the design of crankshaft bearings and needle roller bearings located at the ends of the rods
represents a difficulty: high temperatures, poor lubrication conditions and high loads, in particular due to the very high centrifugal forces.
Two-stroke chainsaw engines are demanding applications that NTN can handle with needle roller bearings. Our bearings have been
tested under the most severe conditions and have demonstrated their technical superiority.

By mastering the design and manufacturing processes, using the best materials, heat treatments and surface treatments, type H needle
roller and cage assemblies have become the reference on this market. NTN equips millions of professional chainsaws around the world.

7 With You
 TWO-WHEELERS
MOTORCYCLES
Recognised by leading manufacturers of two-wheelers,
NTN needle roller bearings guarantee perfect safety and
exceptional durability. Along all the kilometres,
from the motorcycle to the competition sports bike,
NTN brings complete peace of mind.

4
1
3

1
4

3
2

STARTER 1  : K
o Needle roller and cage assemblies are subject to strong acceleration and a high starting torque during each use.

CRANKSHAFT 2  : KBK
o Needle roller and cage assemblies for connecting rod assemblies withstand high loads due to the particularly severe centrifugal forces.

TRANSMISSION 3  : NKZ
o The large speed variations & the impacts in the transmission during gear changes place very high strain on the gearbox bearings.
The solid outer ring makes it possible to compensate for the relative lack of rigidity of the crankcase.

SUSPENSION ARM JOINT 4  : HK AND HMK

o The drawn cup needle roller bearing with solid lubrication (LP03) is extremely suitable for oscillating applications; it is designed to
last for the service life of the motorcycle.

With You 8
 CONSTRUCTION MACHINERY
EXCAVATOR
Construction machinery uses a large number of
needle roller bearings, all available in the NTN range.
Reliability and robustness are the key points sought
by users, which is why NTN has been supplying
the world’s leading manufacturers for decades.

1 2

VARIABLE DISPLACEMENT PUMP 1  : GPK

o This cradle-shaped bearing operates in oscillating motion. It is used to enable the angular movement of the swash plate of the
hydraulic pump, which directly depends on the instantaneous flow rate of the pump. In addition to its compactness, the functional
accuracy of the bearing ensures excellent control of the flow variations of the variable displacement hydraulic pump.

WHEEL REDUCER (FINAL DRIVE) AND SUPERSTRUCTURE ORIENTATION EPICYCLIC GEARING 2  : K

o The needle roller and cage assemblies are used in planetary gears. In this type of complex transmission, despite their great
compactness and sometimes extreme operating conditions, these robust and reliable bearings withstand heavy loads, ensuring a
longer service life of the equipment.

9 With You
 AGRICULTURE
SWATHER
Towed machines are subjected to rough treatment: impacts, dust, humidity, mud, etc.
The seasons follow one another with their share of challenges and it is no coincidence
that the extreme robustness of NTN needle roller bearings has impressed the most
demanding manufacturers.

2
2
1

( 2  GS)

( 2  AXK)
( 2  WS)

VERTICAL SPINDLE SHAPER 1  : KR

o The complex movement of the arms of the swather is created by the rollers rolling in a cam. In the open version, the bearing and
the cam are subject to ingress of pollution. In a sealed housing, the roller will not require any maintenance. It will then withstand
the seasons without any maintenance.

WHEEL ROTATION THRUST BEARING 2  : AXK + GS + WS

o The thrust bearing serves as an interface between the chassis and the directional part including the wheel, enabling its orientation
during turns. The thrust bearing must withstand the weight of the swather by absorbing the impacts coming from the wheels.

With You 10
 MACHINES & EQUIPMENT
BOARDING

2 1

In an increasingly demanding industrial world, the operation of

machinery and equipment in industrial production and logistics
no longer tolerates shut-downs. Often invisible, NTN needle roller
bearings are nevertheless ubiquitous in factories, as in our daily lives.
By their reliability and durability, they operate unnoticed, guaranteeing
the operators the proper functioning of their equipment.

HORIZONTAL GUIDANCE 1  : KRV

o The cam follower on a full complement shaft is used to smoothly guide the telescopic part of the tunnel into the first section.
The roller then rolls on a rail, it is put under stress at low speed, with a very heavy load generated by the weight of passengers and
a very long overhang.

VERTICAL GUIDANCE 2  : NUKR

o T he cam follower on a double-row roller shaft is used in the frame to place the tunnel in the correct position in front of the aircraft
door. It must therefore withstand a heavy weight, endure impacts and vibrations due to passengers walking in the tunnel. It enables
vertical guidance by rolling on a rail. The design of this roller also makes it possible to withstand axial loads during the manoeuvres
of the tunnel.

11 With You
PRE-SELECTION GUIDE
NTN needle roller bearings are all characterised by their excellent capacity/overall dimensions ratio. To get the most out of their performance, it is important to
choose the type of needle roller bearings according to three characteristics of the housing and the shaft: circularity and rigidity, surface condition and hardness.

Housing characteristics Shaft characteristics

Circularity and Surface condition Circularity and Surface condition
Hardness Hardness
rigidity (roughness) rigidity (roughness)

Needle roller
and cage ++ ++ ++ ++ ++ ++
assembly

Drawn cup
needle roller ++ + + ++ ++ ++
bearing

Bearing with
solid rings
without + + o ++ ++ ++
inner rings

Bearing with
solid rings
with + + o + + o
inner rings

+ +
(if the roller (if the roller
Cam follower
rolls on a rolls on a
+ + o
raceway) raceway)

+ +
(if the roller (if the roller
Cam follower
rolls on a rolls on a
on shaft
raceway) raceway)

With You 12
 SELECTION GUIDE
Simplify your search by selecting the type of product and the main technical characteristics desired.

Product
Precision

mounting
Technical
Ease of
Speed

Category Series Type of bearing Main characteristics presentation

Radial

Axial

ref. page
load

load

page

Needle roller and K Needle roller and cage assemblies Standard cage, very rigid 16
cage assemblies
K..ZW Needle roller and cage assemblies Machined cage with two needle rows 16

KMJ/PCJ Needle roller and cage assemblies Drawn steel cage, M-shaped profile 16
↑ ⃝ ⃝ 36 - 40
KJ..S Needle roller and cage assemblies Drawn steel cage 16

KV..S Needle roller and cage assemblies Drawn steel cage of large thickness, very rigid, V-shaped profile 16

GK Needle roller and cage assemblies in two parts Machined cage in two parts 16

Needle roller and PK Needle roller and cage assemblies for big-end Machined needle roller and cage assemblies 17
cage assemblies
for connecting KMJ..S Needle roller and cage assemblies for big-end Drawn steel cage 17
rod
↑ ⃝ ⃝ KBK Needle roller and cage assemblies for small-end Machined cage 17 41

KV..S Needle roller and cage assemblies for small-end Drawn steel cage 17

High performance needle roller and cage

H Special cage for high speeds and heavy loads 17
assemblies

Drawn cup HK/HKS Drawn cup needle roller bearings Standard bushing, polyamide resin or steel moulding cage 18
needle roller
bearings HK..L/LL Drawn cup needle roller bearings Standard bushing, sealed 18

HK..ZWD Drawn cup needle roller bearings Double-row drawn cup needle roller bearings 18

DCL/SCE Drawn cup needle roller bearings Standard bushing in imperial dimensions 18

HMK/DCH Drawn cup needle roller bearings High capacity bushing 18

↑ 42 - 46
HMK..L/LL Drawn cup needle roller bearings High capacity bushing, sealed 18

HMK..ZWD Drawn cup needle roller bearings High capacity double-row bushing 18

BK/BKS Drawn cup needle roller bearings closed end Standard bushing, polyamide resin or steel moulding cage 19

BK..L Drawn cup needle roller bearings closed end Standard bushing, sealed 19

BK..ZWD Drawn cup needle roller bearings closed end Double-row standard drawn cup needle roller bearings 19

RNA48/RNA49/
Needle roller Bearing without inner ring Very rigid outer ring, dimensions according to ISO 15 standard 20
RNA59/RNA69
bearings with
solid rings Very rigid outer ring, with ribs, dimensions according to ISO 15
RNA49..R Bearing without inner ring 20
standard
Very rigid outer ring, with ribs, dimensions according to ISO 15
RNA69..R Bearing without inner ring 20 47 - 51
standard

NK/NKS/NKZ Bearing without inner ring Very rigid outer ring, many cage choices 20

↑ ⃝ ⃝ NK..R/MR Bearing without inner ring Very rigid outer ring, with ribs, many cage choices 20

NA48/NA49/NA59 Bearing with inner ring Very rigid bearing, dimensions according to ISO 15 standard 21

NA49..R/
Bearing with inner ring Very rigid bearing, dimensions according to ISO 15 standard 21
NA59..R/ NA69..R
42 - 54
NK..R+1R/MR+M1 Bearing with inner ring Very rigid bearing, range of cage choices 21

NK+1R/NKS+1R Bearing with inner ring Very rigid bearing, range of cage choices 21

DIFFICULT MOUNTING FAIRLY EASY MOUNTING EASY MOUNTING

MEDIUM PRECISION GOOD PRECISION EXCELLENT PRECISION
NOT SUITABLE FOR SPEED RANGES SUITABLE FOR SPEED RANGES VERY SUITABLE FOR HIGH SPEED
UNSUITABLE LOW CAPACITY GOOD CAPACITY

13 With You
 SELECTION GUIDE (CONTINUED)
Product

Precision

mounting
Technical

Ease of
Speed
Category Series Type of bearing Main characteristics presentation
Radial

Axial

ref. page
load

load

page

Needle roller RNAO Bearing without inner ring Separable cage and outer ring for easier mounting 22
bearings with 55
separable solid RNAO..ZW Bearing without inner ring Double-row separable cage and outer ring for easier mounting 22
rings
↑ ⃝ ⃝
⃝

NAO Bearing with inner ring Separable cage, inner ring and outer ring for easier mounting 22
56
NAO..ZW Bearing with inner ring Separable double-row cage, inner ring and outer ring for easier mounting 22

NKX Needle roller bearing + thrust ball bearing Open thrust ball bearing to withstand axial loads (uni-directional) 24

Combined NKX..Z Needle roller bearing + thrust ball bearing Thrust ball bearing with shield to withstand axial loads (uni-directional) 24
bearings 62
NKXR Needle roller bearing + thrust roller bearing Open thrust roller bearing to withstand axial loads (uni-directional) 25

NKXR..Z Needle roller bearing + thrust roller bearing Thrust roller bearing with shield to withstand axial loads (uni-directional) 25

NK1A Needle roller bearing + balls Four point contact ball bearing to withstand axial loads (bi-directional) 24
63
ARN Needle roller bearing + thrust roller bearing High capacity bi-directional thrust roller bearing used at the end of ball screws 25

AXK Thrust bearing cage Brass or steel cage (according to diameter) 26 76

K811/K812 Thrust bearing cage Cylindrical roller cage, in steel or aluminium 26

K874 Thrust bearing cage Cylindrical roller cage in aluminium 26

Thrust
K893 Thrust bearing cage Cylindrical roller cage in aluminium 26 78
bearings

811/812 Complete thrust bearing Cylindrical roller thrust bearing, solid washers, cage K811 or K812 27

874 Complete thrust bearing Cylindrical roller thrust bearing, solid washers, cage K874 27

893 Complete thrust bearing Cylindrical roller thrust bearing, solid washers, cage K893 27 79

AS Thrust bearing washer Pressed steel support washer 27 76

WS811/
WS812/
Thrust bearing washer Solid support washer guided by the outer diameter 27
WS874/
WS893
77
GS811/
GS812/
Thrust bearing washer Solid support washer guided by the inner diameter 27
GS874/
GS893
DIFFICULT MOUNTING FAIRLY EASY MOUNTING EASY MOUNTING
MEDIUM PRECISION GOOD PRECISION EXCELLENT PRECISION
NOT SUITABLE FOR SPEED RANGES SUITABLE FOR SPEED RANGES VERY SUITABLE FOR HIGH SPEED
UNSUITABLE LOW CAPACITY GOOD CAPACITY

With You 14
 SELECTION GUIDE (CONTINUED AND CONCLUDED)
Product

Precision

mounting
Technical

Ease of
Speed
Category Series Type of bearing Main characteristics presentation
Radial

Axial

ref. page
load

load

page

RNA22..LL Cam follower without inner ring Needle rollers suitable for speed range, without inner ring, with two seals 28
71
RNAB2 Cam follower without inner ring Needle rollers suitable for speed range, without inner ring, of separable type 28

NA22..LL Cam follower with inner ring Needle rollers suitable for speed range, with inner ring, with two seals 28 72
Cam followers
NATR High capacity cam follower Needle roller, high radial load capacity, labyrinth sealing 28
73
NATR..LL High capacity cam follower Needle roller, high radial load capacity, with two seals 28

NATV/NACV High capacity full complement cam follower Full complement needle roller, high load capacity, but low operating speed 29

NATV..LL/ Full complement needle roller, sealed, high load capacity, but low operating
High capacity full complement cam follower 29
NACV..LL speed
73 - 75
NUTR/NUTR2/
Very high capacity cam follower Roller bearing, very high radial load capacity, also accepts axial loads 29
NUTR3
NUTW/NUTW2/
Very high capacity cam follower Roller bearing, very high radial load capacity, also accepts axial loads 29
NUTW3
Cam follower on shaft with needle roller and
KR/CR Adapted to the speed range, version without seals 30
cage assemblies
Cam follower on shaft with needle roller and
KR..LL Adapted to the speed range, version with two seals 30
cage assemblies
Cam follower on shaft with needle roller and
KRT Adapted to the speed range, version without seals, tapped hole 30
cage assemblies
Cam follower on shaft with needle roller and
KRT..LL Adapted to the speed range, version with two seals, tapped hole 30
cage assemblies
Cam follower on shaft with needle roller and
KRU Adapted to the speed range, version without seals, eccentric axis 30
cage assemblies
Cam follower on shaft without needle roller
Cam followers KRV/CRV Adapted to high radial loads, version without seals 31 64 - 67
and cage assemblies
on shafts
KRV..LL/ Cam follower on shaft without needle roller
Adapted to high radial loads, version with seals 31
CRV..LL and cage assemblies
Cam follower on shaft without needle roller
KRVT Adapted to high radial loads, version without seals, tapped hole 31
and cage assemblies
Cam follower on shaft without needle roller
KRVT..LL Adapted to high radial loads, version without seals, tapped hole 31
and cage assemblies
Cam follower on shaft without needle roller
KRVU Adapted to high radial loads, version without seals, eccentric axis 31
and cage assemblies
Cam follower on shaft without needle roller
KRVU..LL Adapted to very high radial loads, version with seals, eccentric axis 31
and cage assemblies

NUKR Cam follower on roller shaft Adapted to very high radial loads and moderate axial loads 32

NUKRT Cam follower on roller shaft Adapted to very high radial loads and moderate axial loads, tapped hole 32 70

Adapted to very high radial loads and moderate axial loads, tapped hole,
NUKRU Cam follower on roller shaft 32
eccentric axis

Inner rings 1R/M1 Inner ring Solid ring acting as a raceway 23 -

A Needle with round tips Semi-standard needle, can also act as pin or axis 33
Needles
F Needle with flat ends Standard needle, the most common, can also act as pin or axis 33 -

BR Stop segments Stop segment for housing 33 -

Stop segments
WR Stop segments Stop segment for shaft 33 -

G Single lip seal, T°C: -25° C to +120° C. Designed to retain grease (not oil) and prevent dust entry 33 -
Seals
GD Double lip seal, T°C: -25° C to +120° C. Designed to retain grease (not oil) and prevent dust entry 33

DIFFICULT MOUNTING FAIRLY EASY MOUNTING EASY MOUNTING

MEDIUM PRECISION GOOD PRECISION EXCELLENT PRECISION
NOT SUITABLE FOR SPEED RANGES SUITABLE FOR SPEED RANGES VERY SUITABLE FOR HIGH SPEED
UNSUITABLE LOW CAPACITY GOOD CAPACITY / HIGH CAPACITY / VERY HIGH CAPACITY

15 With You
NEEDLE ROLLER AND CAGE ASSEMBLIES
Description: 
They consist of a single cage without inner or outer ring.
The shaft and housing are used as the raceway surface.

Advantage:
• Compact and light-weight.

K K..ZW
Single-row needle roller and cage assembly Double-row machined cage
Diameter under needles: Diameter under needles: 8 to 285 mm
• Machined cage: 3 to 285 mm
• Welded cage (S): 10 to 100 mm
• Polyamide cage (T2): 3 to 74 mm

KJ..S KMJ/PCJ
Pressed steel cage M-shaped profile needle roller and cage
Type of cage: Welded assemblies in pressed steel
Diameter under needles: 20 to 40 mm • KMJ: Metric dimension series
• PCJ: Imperial dimension series
Diameter under needles:
• With pressed cage 15 to 100 mm
• With welded cage: 10 to 40 mm

KV..S GK
Pressed steel cage of large thickness, Cage in two parts
very rigid, V-shaped profil Type of cage: Welded
Type of cage: Welded Diameter under needles: 8 to 285 mm
Diameter under needles: 7 to 100 mm

DESIGNATIONS
SPECIAL VERSION
Empty: Standard version, initial design
X~Xn: Change version of the first standard version
V1~Vn: S pecial version meeting the non-standard
TYPE OF SERIES DIAMETER ON NEEDLES specifications
A, B, C: Modified internal construction

8E- K 3 x 6 x 7 X1 T2

TREATMENT CODE DIAMETER WIDTH CAGE

HL- : Special rollers improving lubrication UNDER NEEDLES Empty: Steel
8E- : Case-hardened cage T2: Polyamide
8Q- : Nitrided cage S: In steel, welded
ZW: Double row
L1: Brass
L3: Aluminium

With You 16
NEEDLE ROLLER AND CAGE ASSEMBLIES FOR CONNECTING ROD
Description: 
They are suitable for the severe conditions of small and medium-sized engine and compressor connecting rods.
They withstand rapid variations in loads and load directions, high temperatures and low lubrication.

Advantages:
• Resistance to extreme operating conditions due to the design, materials and production processes used.

Optional:
• Possibilities of specific surface treatments of the cage for the harshest applications.

KBK KV..S
M-shaped profile - designed for connecting Pressed steel cage of large thickness,
rod and piston shaft very rigid, V-shaped profile
Type of cage: Machined Type of cage: Welded
Diameter under needles: 7 to 25 mm Diameter under needles: 7 to 100 mm

H PK
Ultra high performance cage M-shaped profile - designed for connecting
Type of cage: Reinforced, rod and piston shaft
surface treatment Type of cage: Machined
Diameter under needles: 10 to 38 mm Diameter under needles: 10 to 38 mm
Note: Possibility of surface treatment
on the cage

KMJ..S
Pressed steel cage - M-shaped profile
Type of cage: Welded
Diameter under needles: 10 to 38 mm
Note: Possibility of surface treatment
on the cage

DESIGNATIONS
SPECIAL VERSION
Empty: Standard version, initial design
X~Xn: C hange version of the first standard version
V1~Vn: S pecial version meeting the non-standard
TYPE OF SERIES DIAMETER ON NEEDLES specifications
A, B, C: Modified internal construction

8Q- KBK 12 x 17 x 14.2 X2

TREATMENT CODE DIAMETER WIDTH

HL-: Special rollers UNDER NEEDLES
improving lubrication
8Q-: Nitrided cage

17 With You
DRAWN CUP NEEDLE ROLLER BEARINGS
Description:
They are open or closed, without inner ring or stop segment. The shaft is used as the raceway.
The needles and the cage are not removable. The drawn cup needle roller bearings fit into
compact designs due to their thin outer ring.

Advantages:
• Extreme hardness thanks to the raceway of the thermally treated outer ring.
• Easy handling

Optional:
• Heavy series HMK capable of withstanding extreme loads.

OPEN END
HK / HKS HK..L
• HK: Single row Sealed series
• HKS: Special series Diameter under needles: 12 to 50 mm
Diameter under needles: 3 to 50 mm Seal: One side
Note: Suffix F: improved service life (up to
3 times) and easy mounting

HK..LL
Sealed series
Diameter under needles: 12 to 50 mm
Seal: Two sides

DCL / SCE HK..ZWD

Imperial dimension series Double row
Diameter under needles: 6.35 to 50.8 mm Diameter under needles: 15 to 30 mm
Note: Single and double row Note: Lubrication hole on the outer ring (D)

OPEN END HIGH CAPACITY

HMK / DCH HMK..L

• HMK : Metric dimension series Sealed series
• DCH : Imperial dimension series Diameter under needles: 15 to 50 mm
Diameter under needles: 15 to 50 mm Seal: One side
Note: Bearing length and load are lower
than the HMK model of the same dimension

HMK..LL
Sealed series
HMK..ZWD Diameter under needles: 15 to 50 mm
Double row Seal: Two sides
Diameter under needles: 30 to 50 mm Note: Bearing length and load are lower
Note: Lubrication hole on the outer ring (D) than the HMK model of the same dimension

With You 18
 WITH CLOSED END

BK / BKS BK..L
• BK : Single row Single row with seal
• BKS : Special series Diameter under needles: 12 to 50 mm
Diameter under needles: 12 to 50 mm

BK..ZWD
Double row
Diameter under needles: 12 to 50 mm
Note: Lubrication hole on the outer
ring version (D)

DESIGNATIONS
ACCURACY CLASS
P6: Class 6
SEAL P5: Class 5
L: Seal on only one side P4: Class 4
LL: Seal on each side PX1~PXn: Special tolerances
GREASE
OPTIONAL /2AS: Shell Alvania 2
D : With lubrication hole /3AS: Shell Alvania 3
TYPE OF SERIES WIDTH S : Adjustable clearance /LP03: Lubsolid ((solid grease)
/8A: Alvania EP2
/5K: Multemp SRL

7E- HK 03 06 LL ZW D PX1 /3AS Vn

TREATMENT CODE CAGE SPECIAL VERSION

7E-: Case-hardened outer ring Empty: Steelr Empty: Standard version, initial design
8Q-: Nitrided cage T2: Polyamide X~Xn: Change version of the first standard version
S: Steel, welded V1~Vn: Special version meeting the non-standard
DIAMETER ZW: Double row specifications
UNDER NEEDLES L1: Brassn A, B, C: Modified internal construction
L3: Aluminium 8A: Modified design of the bushing
C: Welded CT, FM: Improved version => increased load capacity bearing
F1: Steel, machined
J, JW: Pressed steel

19 With You
NEEDLE ROLLER BEARINGS WITH SOLID RINGS
Description:
They consist of a solid outer ring, needles and a cage.
The outer ring and the needle roller and cage assemblies are inseparable due to the
shoulders or side plates.
They are suitable for high speeds and high loads.

Advantages:
• Excellent operating precision.
• High rigidity

Optional:
• Exists with one or two seals (suffix L and LL), greased and suitable for an
operating temperature between -25 °C and + 120 °C.

BEARINGS WITHOUT INNER RING

RNA48 / RNA49 / RNA59 / RNA49..R

RNA69 Dimensions compliant with the JIS B 15 or
Dimensions according to standards JIS ISO 15 standards
B 15 or ISO 15 (series 48/49/59/69) Diameter under needles:
Diameter under needles: • 14 to 490 mm
• 145 to 390 mm (RNA48) • 14 to 58 mm (with sealing)
• 7 to 490 mm (RNA49) Note: Version with shoulders (R)
• 20 to 160 mm (RNA59)
• 22 to 110 mm (RNA69)

RNA69..R NK / NKS / NKZ

Dimensions compliant with the JIS B 15 • NK: H  igh rigidity outer ring/high
or ISO 15 standards precision/standard
Diameter under needles: • NKS: Optimised NK version
• 15 to 35 mm • NKZ: N  K version with increased load
• 40 to 110 mm (double row cage) capacity
Note: Version with shoulders (R) Diameter under needles:
• 5 to 12 mm (NK)
• Two side plates: 8to 40 mm (NKS)
• A ribs and a side plate:
43 to 110 mm (NKS)
• Two ribs: 115 to 170 mm (NKS)

NK..R / MR
Solid outer ring with two ribs
• NK..R: Metric dimension series
• MR: Imperial dimension series
Diameter under needles:
• 14 to 165 mm (NK..R)
• 15.87 to 234.95 mm (MR)

With You 20
 BEARINGS WITH INNER RING

NA48 / NA49 / NA59 NA49..R / NA59..R / NA69..R

Dimensions compliant with the Dimensions compliant with the
JIS B 15 or ISO 15 standards JIS B 15 or ISO 15 standards
Shaft diameter: Shaft diameter:
• 120 to 380 mm (NA48) • 5 to 9 mm (NA49..R)
• 5 to 9 mm (NA49) • 15 to 140 mm (NA59..R)
• 15 to 140 mm (NA59) • 120 to 380 mm (NA69..R)
Note: Single or double row Note: Single or double row

NK+1R / NKS+1R NK..R+1R / MR+M1

• NK+1R: Set made up of a NK and an Series with shoulders
inner ring (1R) • NK..R+1R: Metric dimension series
• NKS+1R: Version with high load • MR+ M1: Imperial dimension series
capacity Shaft diameter:
Shaft diameter: • 10 to 150 mm (NK..R+1R)
• 5 to 150 mm (NK+1R) • 9.525 to 203.2 mm (MR+M1)
• 6 to 150 mm (NKS+1R)

DESIGNATIONS

WIDTH CLEARANCE CAGE GREASE OUTER

d: Bore diameter Empty: Empty: Steel /2AS: Shell Alvania 2 DIAMETER
48: Dimensions according to ISO15 Class N (standard) T2: Polyamide /3AS: Shell Alvania 3 In mm:
49: Dimensions according to ISO15 C2, C3, C4:  S: Steel, welded /LP03: LUBSOLID (solid grease) For the 1R
59: Dimensions according to ISO15 ISO radial clearance ZW: Double row /8A: Alvania EP2 In 1/16ème
69: Dimensions according to ISO15 class L1: Brass /5K: Multemp SRL of an inch:
NA:  L3: Aluminium For the M1
Special clearance, C: Welded INNER RING
TYPE OF SERIES non standard F1: Steel, machined 1R: Metric dimension series
J, JW: Pressed M1: Imperial dimension series
steel

8E- NK 14 / 16 C3 R LL ZW D PX1 /3AS Vn + 1R 10 x 14 x 16

TREATMENT CODE SEAL SPECIAL VERSION BORE WIDTH

HL-: Special rollers improving lubrication L: Seal on only one side Vide: S tandard version, DIAMETER In mm:
7E-: Case-hardened outer ring LL: Seal on each side initial design In mm: For the 1RR
8E-: Case-hardened bearing X~Xn: C hange version of the For the 1R In 1/16ème
8Q-: Nitrided cage OPTIONAL first standard version In 1/16ème of an inch:
D: With lubrication hole V1~Vn: Special version of an inch: For the M1
D1: With lubrication groove meeting the For the M1
and holen non-standard
CODING
RNA, NA: Bore diameter code TOLERANCE CLASSES CODE specifications
NK (+1R): Diameter under rollers/wid P6: Class 6 A, B, C: Modified internal
MR (+M1): Dimensions in 1/16 of an inch; P5: Class 5 construction
diameter under roller X outer diameter X width P4: Class 4
PX1~PXn: Special tolerance

OPTIONAL
R: Outer ring with ribs
T: Increased load capacity bearing

21 With You
NEEDLE ROLLER BEARINGS WITH SEPARABLE SOLID RINGS
Description:
The outer ring and needle roller and cage assemblies are separable as the ring has neither
shoulder nor groove.
The outer ring cannot regulate the axial displacement of the needle roller and cage
assemblies, this is why the bearing must be mounted so that the needle roller and cage
assemblies are guided by the shaft or housing.

Advantages:
• Excellent operating precision.
• The clearance can be perfectly controlled by suitably combining the inner and outer rings
with the needle roller and cage assemblies.
• The inner ring and outer ring can be individually crimped onto a shaft or in a housing to
facilitate mounting of the bearing.

RNAO RNAO..ZW
Outer ring with high rigidity/ Outer ring with high rigidity/
high precision high precision
Type of cage: Single row Type of cage: Double row
Diameter under needles: 5 to 10 mm Diameter under needles: 8 to 80 mm

NAO NAO..ZW
Set made up of RNAO and Set made up of RNAO and
an inner ring (1R) an inner ring (1R)
Diameter under needles: 8 to 90 mm Type of cage: Double row
Diameter under needles: 10 to 70 mm

DESIGNATIONS

TYPE OF SERIES OUTER DIAMETER

WIDTH

NAO 30 x 45 x 26 ZW
CAGE
BORE DIAMETER Empty: Single row in steel
ZW : Double row in steel
T2 : Moulded polyamide cage

With You 22
INNER RINGS

Description:
Many needle roller bearings use the shaft as a raceway surface without the use of an inner ring.
However, it is recommended to use the inner rings with the needle roller bearings, when the shaft
can neither be heat treated nor ground.

1R / M1
• 1R: Metric dimension series
• M1: Imperial dimension series
Diameter under needles:
• 5 to 440 mm (1R)
• 9.525 to 203.2 mm (M1)

DESIGNATIONS

OUTER DIAMETER
In mm: For the 1R
In 1/16ème de pouce : For the M1
TYPE OF SERIES
WIDTH
En mm : For the 1R
En 1/16ème of an inc: For the M1

1R 10 x 14 x 16 D

BORE DIAMETER OPTIONAL

In mm: For the 1R D: Lubrication hole
In 1/16ème of an inc: For the M1

23 With You
COMBINED BEARINGS
Description:
They consist of a radial needle roller bearing to withstand a radial load and a thrust
ball bearing or needle bearing to withstand an axial load, combined to form a
bearing unit.

Advantage:
• Two-in-one bearing: compactness and high radial and axial load capacities.

NEEDLE ROLLER BEARINGS WITH THRUST BALL BEARING

NKX NKX..T2
Bearing with thrust ball bearing/ Bearing with thrust ball bearing/
open type/for axial load open type/for axial load
Shaft diameter: 10 to 70 mm Type of cage: Polyamide
Note: Shaft diameter: 10 to 35 mm
• Radial bearing: with needles
• Thrust bearing: with balls

NKX..T2Z
Bearing with thrust ball bearing/
open type/for axial load/with shield
Type of cage: Polyamide
Shaft diameter: 10 to 35 mm

NK1A59
Needle roller bearing with a ACBB
for axial load
Shaft diameter: 15 to 70 mm
Note:
• Radial bearing: with needles
• Thrust bearing: angular contact

With You 24
NEEDLE ROLLER BEARINGS WITH THRUST ROLLER BEARING

NKXR NKXR..T2
Cylindrical roller thrust bearing/ Cylindrical roller thrust bearing/
open type/for axial load open type/for axial load
Shaft diameter: 15 to 50 mm Type of cage: Polyamide
Note: Shaft diameter: 15 to 50 mm
• Radial bearing: with needles
• Thrust bearing: with rollers

ARN NKXR..T2Z
Needle roller bearing with a double direction Cylindrical roller thrust bearing/
needle thrust bearing/for high load capacity open type/for axial load/with shield
Shaft diameter: 30 to 70 mm Type of cage: Polyamide
Note: Shaft diameter: 15 to 50 mm
• Radial bearing: with needles
• Thrust bearing: with rollers

DESIGNATIONS

BORE DIAMETER
FOR NK1A ONLY
Code 00 01 02 03 04x5=20 05x5=25 06x5=30 99x5=495 /500 /xxx
Ø bore diameter 10 12 15 17 20 25 30 495 500 500 < xxx
For other series: Bore diameter in mm
TYPE OF SERIES

NKX 20 52 T2 Z
CODING
NK1A: OPTIONAL
Bore diameter code
CAGE Z:N
 KX or NKXR
Otherwise: Outer Empty: Steel with dust protection
diameter in mm
T2: Polyamide R : Outer ring with ribs
S: Steel, welded A : Improved internal design
L1: Brass
L3: Aluminium
C: Welded
F1: Steel, machined
J, J : Pressed steel

25 With You
THRUST BEARINGS
Description: 
Single or double acting, they are designed to withstand axial loads. The family
of thrust bearings is made up of several products: needle roller and cage
assemblies, thrust washer, inner ring, outer ring, complete thrust bearing.

Advantage:
• Wide range of complete thrust bearings, ready for mounting.

Optional:
• Wide selection of cage materials.

THRUST BEARING CAGES WITH NEEDLES OR ROLLERS

K811 / K812..T2 K811 / K812

Cylindrical polyamide roller cage Cylindrical roller cage in aluminium
Shaft diameter: Shaft diameter:
• 10 to 120 mm (K811) • 130 to 160 mm (K811)
• 30 to 80 mm (K812) • 85 to 140 mm (K812)
Note: Compliant with Note: Compliant with
the 11 and 12 dimensions series defined the 11 and 12 dimensions series defined
by JIS B 1512 by JIS B 1512

K811 / K812..JW K893

Cage with cylindrical rollers in Cylindrical roller cage in aluminium
pressed steel Shaft diameter:
Shaft diameter: • 30 to 110 mm
• 10 to 90 mm Note: Compliant with
Note: Compliant with the 93 dimensions series defined by JIS
the 11 and 12 dimensions series defined B 1512
by JIS B 1512

K874 AXK / NTC

Cylindrical roller cage in aluminium Needle roller and cage assemblies in
Shaft diameter: pressed steel
• 40 to 90 mm Shaft diameter:
Note: Compliant with • AXK : Metric dimension series
the 74 dimensions series defined • NTC : Imperial dimension series
by JIS B 1512 Shaft diameter:
• 10 to 120 mm
Note: Can be used in combination
with a support washer

AXK
Needle roller and cage assemblies in brass
Shaft diameter:
• 130 to 160 mm
Note: Can be used in combination with an
AS type support washer

With You 26
THRUST BEARING WASHER
GS811 / GS812 / GS874 / WS811 / WS812 / WS874 /
GS893 WS893
Solid washer guided by the outer diameter Solid washer guided by the shaft (bore
Shaft diameter: diameter)
• 10 to 160 mm Shaft diameter:
Note: Rigidity and precision of operation • 10 to 150 mm
superior to that of the AS support washer Note: Rigidity and operating accuracy
superior to the AS support washer

AS11 / NWA / NWB

Plywood: Pressed steel washer
• AS11 : Metric dimension series
• NWA / NWB : Imperial dimension series
Diameter under needles: 10 to 130 mm

COMPLETE THRUST BEARINGS

811 / 812 874
Cylindrical roller thrust bearing 11/12 Series, Cylindrical roller thrust bearing - Series 74,
consisting of WS811 / 812, GS811 / 812 and consisting of WS874, GS874 and K874
K811 / 812 Shaft diameter:
Shaft diameter: • 40 to 90 mm
• 10 to 160 mm (811) Note: Compliant with the 74 dimensions
• 30 to 140 mm (812) series defined by JIS B 1512
Note: Compliant with the 11 and 12 dimensions
series defined by JIS B 1512

893
Cylindrical roller thrust bearing - Series 93, consisting of WS893, GS893 and K893
Shaft diameter: 30 to 110 mm
Note: The WS893 and GS893 support washers are used together.
Compliant with the 93 dimensions series defined by JIS B 1512

DESIGNATIONS
BORE DIAMETER
Code 00 01 02 03 04x5=20 05x5=25 06x5=30 99x5=495
Ø bore diameter 10 12 15 17 20 25 30 495

GREASE
TYPE OF SERIES Empty: Without grease (standard
/LP02: Lubsolid (solid grease)

AXK 11 04 V1 /LP03 /LP03: Lubsolid (solid grease)

SERIES CODE SPECIAL VERSION

11: Dimensions 11 CAGE Empty: Standard version, initial design
12: Dimensions 12 Empty: Aluminium V1~Vn: Special version meeting
13: Dimensions 13 T2: Polyamide the non-standard specifications
74: Dimensions 74 J, JW: Pressed steel A,B,C: Modified internal construction
93: Dimensions 93 L1: Brass PX1~PXn: Special tolerances

27 With You
ROLLER FOLLOWERS
Description:
It is a bearing whose thick outer ring rolls on a cam track.
Advantage:
• Wide choice of variants depending on the requirements (high speeds, heavy loads, impacts).
Optional:
• Rounded outer ring: reduction of the edge loads that are applied on the contact surface
between the track and the outer ring.

Without inner ring, with cage, suitable for HIGH SPEEDS

RNAB2 RNA22..LL
Separable type Roller diameter: 19 to 90 mm
Roller diameter: 16 to 90 mm Shaft diameter: 10 to 58 mm
Shaft diameter: 7 to 68 mm NOTE: With seal
NOTE: Without seal

With cage and inner ring, suitable for HIGH SPEEDS

NATR NATR..LL
Non-separable type Non-separable type
Roller diameter: 16 to 90 mmm Roller diameter: 16 to 90 mm
Shaft diameter: 5 to 50 mm Shaft diameter: 5 to 50 mm
NOTE: With seal

NA22..LL
Roller diameter: 19 to 90 mm
Shaft diameter: 6 to 50 mm
NOTE: With seal

With You 28
 Full complement, suitable for HIGH RADIAL LOADS

NATV / NACV NATV..LL / NACV..LL

• NATV: Metric dimension series Non separable and sealed
Non separable Roller diameter: 16 to 90 mm
• NACV: Imperial dimension series Non Shaft diameter: 5 to 50 mm
separable/cylindrical outer ring
Roller diameter:
• 16 to 90 mm (NATV)
• 19.05 to 152.4 mm (NACV)
Shaft diameter:
• 5 to 50 mm (NATV)
• 6.35 to 57.15 mm (NACV)

Full complement, suitable for HIGH RADIAL LOADS AND SHOCKS

NUTR / NUTR2 / NUTR3 NUTW / NUTW2 / NUTW3

Double row of cylindrical rollers/ Double row of cylindrical rollers/
non separable type non separable type
Roller diameter: 35 to 110 mm Roller diameter: 35to 90 mm
Shaft diameter: 15 to 50 mm Shaft diameter: 15 to 50 mm
NOTE: NOTE:
• Labyrinth seal • With centring rim
• Greased • Labyrinth seal
• Withstands moderate axial load • Greased
• Withstands moderate axial load

DESIGNATIONS

BORE DIAMETER
NATR et NATV: Bore diameter in mm
NACV: Bore diameter in 1/16th of an inch
RNA, NA, NUTR et NUTW:
Code /6 /8 00 01 02 03 04x5=20 05x5=25 06x5=30 99x5=495 /500 500 < xxx
Ø bore diameter 6 8 10 12 15 17 20 25 30 495 500 500 < xxx

TYPE OF SERIES

NATR 14 X T2 LL /3AS

OUTER RING SHAPE SEAL GREASE

Empty: R adius of the ring L: Seal on only one side Empty: Ungreased bearing
R = 500 mm LL: Seal on each side /2AS: Shell Alvania 2
X: Cylindrical outer ring /3AS: Shell Alvania 3
/LP03: Lubsolid (solid grease)
CAGE /8A: Alvania EP2
T2: Polyamide /5K: Multemp SRL
DO: Without lubrication hole /L588: Pyrononc Universal N6C
F: Improved version
C: Special version for interchangeability in Europe
T: Increased load capacity

29 With You
CAM FOLLOWERS
Description: 
Cam follower with a shaft instead of an inner ring. Supplied with its nut, lubrication
system and plugs.
Advantages:
• Wide choice of variants depending on the requirements (high speeds, heavy loads, impacts).
• Easy mounting thanks to the shaft thread.
Options:
• Rounded outer ring: reduction of the edge loads that are applied on the contact
surface between the track and the outer ring.
• Suffix H version: tightening with hexagonal wrench.
• Suffix F version: optimised needle profile and special heat treatment.
• Suffix D0 version: permanently greased with high performance grease.

With cage, suitable for HIGH SPEEDS

KR / CR KR..LL / CR..LL
• KR : Metric dimension series with cage • K R..LL : M
 etric dimension series
• CR : Imperial dimension series with cage
Roller diameter: • CR..LL : Imperial dimension series
• 10 to 90 mm (KR) Roller diameter:
• 12.7 to 57.15 mm (CR) • 10 to 90 mm (KR..LL )
Shaft diameter: • 15.875 to 57.15 mm (CR..LL)
• 3 to 30 mm (KR) Shaft diameter:
• 4.826 to 22.225 mm (CR) • 3 to 30 mm (KR..LL)
Note: • 6.35 to 22.225mm (CR..LL)
• Without seal Note:
• Series with cage in metric dimensions • With seal
• Shaft side: hexagon socket hole or slot
for screw

KRT KRT..LL
Standard Series - slot for screwdriver Standard Series - slot for screwdriver and
and tapped hole tapped hole
Roller diameter: 16 to 90 mm Roller diameter: 16 to 90 mm
Shaft diameter: 6 to 30 mm Shaft diameter: 6 to 30 mm
Note: Note:
• Without seal • With seal

KRU
Design identical to the KR but with an
eccentric axis
Roller diameter: 16 to 90 mm
Shaft diameter: 6 to 30 mm
Note:
• Pre-greased
• Available in sealed version (LL)
• Check interchangeability

With You 30
Full complement, suitable for HIGH RADIAL LOADS

KRV / CRV KRV..LL / CRV..LL

• KRV : Series without cage for load • KRV..LL : Series without cage for
capacity load capacity
• CRV : Imperial dimension series • CRV..LL : Imperial dimension series
Roller diameter: Roller diameter:
• 10 to 90 mm (KRV) • 10 to 90 mm (KRV)
• 12.7 to 152.4 mm (CRV) • 12.7 to 152.4 mm (CRV)
Shaft diameter: Shaft diameter:
• 3 to 30 mm (KRV) • 3 to 30 mm (KRV..LL )
• 4.826 to 6.5 mm (CRV) • 4.826 to 63.5 mm (CRV..LL )
Note: Note:
• Without seal • With seal
• Series without cage • Shaft side: with screwdriver slot
• Shaft side: with screwdriver slot • Pre-greased
• Pre-greased

KRVT KRVT..LL
Slot for screwdriver and tapped hole Sealed series - slot for screwdriver
Roller diameter: 16 to 90 mm and tapped hole
Shaft diameter: 6 to 30 mmm Roller diameter: 16 to 90 mm
Note: Shaft diameter: 6 to 30 mmm
• Version without cage Note:
• With seal

KRVU KRVU..LL
Identical to the KRVT Sealed series
but with an eccentric axis Roller diameter: 16 to 90 mm
Roller diameter: 16 to 90 mm Shaft diameter: 6 to 30 mm
Shaft diameter: 6 to 30 mm Note:
Note: • Pre-greased
• Pre-greased • Check interchangeability
• Check interchangeability

31 With You
 With two rows of cylindrical rollers, full complement, with shields, suitable for
VERY HIGH RADIAL LOADS AND IMPACTS
NUKR NUKRT
Version with screwdriver slot or Identical to NKR but with screwdriver
hexagonal hole (H) slot and tapped hole
Roller diameter: 30 to 180 mm Roller diameter: 30 to 180 mm
Shaft diameter: 12 to 64 mm Shaft diameter: 12 to 64 mm
Note: Note:
• Without cage, protected • Without cage, protected
• With seal • Pre-greased
• Pre-greased • Withstands moderate axial load
• Withstands moderate axial load

NUKRU
VARIATIONS
Identical to the NUKRT but with an eccentric axis
Suffix «D0» version:
Roller diameter: 30 to 180 mm
greased for life with high
Shaft diameter: 12 to 64 mm
performance grease
Note:
• Without cage, protected, eccentric
• Shaft side: with screwdriver slot and Suffix «H» version: tightening
tapped hole with hexagonal wrench
• P re-greased
• C heck interchangeability
•W  ithstands moderate axial load Version without suffix «X»:
rounded outer diameter

DESIGNATIONS

OUTER RING SHAPE OPTIONAL

Empty: R adius of the outer ring T2 Moulded polyamide cage
R = 500 mm DO: Without lubrication hole
X: Cylindrical outer ring F: Improved version
C: S pecial version for interchangeability in Europe
TYPE OF SERIES T: C: Increased load capacity

KR 14 X T2 H LL /3AS

OUTER DIAMETER SEAL GREASE

KR, KRV, KRU, L: Seal on only one side Empty: Ungreased bearing
KRVU, NUKR: LL: Seal on each sid /2AS: Shell Alvania 2
Outer diameter in mm /3AS: Shell Alvania 3
CRV: Outer diameter in /LP03: Lubsolid (solid grease)
1/16th of an inch /8A: Alvania EP2
HOLE
/5K: Multemp SRL
H: Hexagonal hole
/L588: Pyrononc Universal N6C
for hex wrench
Empty: Screwdriver slot

With You 32
 COMPONENTS
In addition to its needle roller bearing ranges, NTN offers a range of high quality components

NEEDLES
Description: All NTN needles are made of steel with high carbon and chromium content, machined by grinding and super-
finishing after heat treatment.
Advantage: Extreme hardness for a longer service life.
Options: 
• With or without crown
• Optional special surface treatment
• Available
TYPE Fin many lengths and from 1.5 to 5 mm in diameter

TYPE F F DESIGNATIONS
Needles with flat tips
Length: 5.8 to 49.8 mm TYPE OF NEEDLES LENGTH
Needle diameter: 1.5 to 5 mm

A
F 3 x 23.8
TYPE A

TYPE A Needles with round tips

Fig. 1 WR snap ring Fig. 2 BR snap ring
Length: 5.8 to 49.8 mm
Needle diameter: 1.5Fig.
to 51 mm
WR snap ring Fig. 2 BR snap ring
DIAMETER

STOP SEGMENTS
Description: For shaft or housing, these stop segments are exclusively used to fix or axially guide a ring or a cage.

DESIGNATIONS
WR
Stop segment for shaft
Shaft diameter: 4 to 400 mmm TYPE OF STOP DIAMETER
SEGMENT
BR
Stop segment for housing
Fig. 1 Type G (LEG) Fig. 2 Type GD (LEGD)

Fig. 1 WR snap ring

Housing diameter: 7 to 440 mm
Fig. 1 Type G (LEG)
Fig. 2 BR snap ring
WR 105
Fig. 2 Type GD (LEGD)

Fig. 1 WR snap ring Fig. 2 BR snap ring

ng
SEALS
Fig. 2 BR snap ring

Description: These are special seals for needle roller bearings. Their section is designed to adapt to these bearing.
ring Options:
Fig. Two different
2 BR snap ring types of seals are available: the G series with one lip and the GD series with two lips. The latter is intended
to retain the grease and prevent dust from entering.

DESIGNATIONS
G
Single lip seal
TYPE OF SEAL OUTER DIAMETER
Inner diameter: 4 à 50 mm

Fig. 1 Type G (LEG) GD Fig. 2 Type GD (LEGD)

G 25 x 32 x 4
Double lip seal
Inner diameter: 14 à 50 mm WIDTH INNER DIAMETER
(LEG) Fig.
Fig. 1 Type
2 Type GDG(LEGD)
(LEG) Fig. 2 Type GD (LEGD)

G (LEG) Fig. 2 Type GD (LEGD) 33 With You

 K
K..S
KJ..S

HK
HMK HK..ZWD
DCL HMK..ZWD BK BK..ZWD

RNA49 NA49
RNA59 NA59
RNA48 NA48
RNA49 NK..R NA49 NK..R+1R
NK NKS NKS NKS RNA69 NK+1R MR+M1

RNAO RNAO..ZW

NKX NKXR
NKX..Z NKXR..Z

KRV KRV..LL
KR KR..LL CRV CRV..LL

NATV
RNAB2 NAB2 RNA22..LL NA22..LL NATR NATR..LL NACV

K811
AXK11 K812 K893 K874 AS WS GS

With You 34
 TECHNICAL SUMMARY

KMJ
Needle roller and cage assemblies 36
PCJ K..ZW

Needle roller and cage assemblies for 41

KBK
connecting rod

Drawn cup needle roller bearings 42

HK..L HK..LL

NA49..L NA49..LL
Needle roller bearings with solid rings 47
NA69 RNA49..L+1R RNA49..LL+1R

Needle roller bearings 55

NAO NAO..ZW
with separable solid rings

1R
Inner rings 57
M1

Combined bearings 62
NK1A ARN

KRT
NUKR
NUKRT
Cam followers 64
KRU NUKRU

NATV..LL
Roller followers 71
NACV..LL NUTR NUTW

811
Thrust bearings 76
812 893 874

35 With You
 BC BC BC BC BC

øE W øF W øE W øF W øE W øF W øE W øF W øE W øF W

K K -- ZW KMJ KJ -- S KV -- S  
K -- T2 KMJ -- S
K -- S PCJ

Needle roller and cage assemblies

Part numbers Dimensions (mm) Basic load rating (kN) Limiting speeds (tr/min) Mass (kg)

Fw Ew Bc dynamic static grease oil

K3X6X7T2 3 6 7 1,46 0,97 33000 50000 0,0004
K4X7X7T2 4 7 7 1,77 1,27 30000 45000 0,0005
K5X8X8T2 5 8 8 2,64 2,19 27000 40000 0,0007
K5X8X10T2 5 8 10 2,72 2,25 27000 40000 0,0009
K6X9X8T2 6 9 8 2,66 2,28 25000 37000 0,0009
K6X9X10T2 6 9 10 3,4 3,15 25000 37000 0,0011
K6X10X13T2 6 10 13 4,4 3,7 25000 37000 0,0019
K7X10X8T2 7 10 8 2,67 2,35 23000 34000 0,0009
K7X10X10T2 7 10 10 3,4 3,2 23000 34000 0,0011
K8X11X8T2 8 11 8 3,15 3 21000 32000 0,0011
K8X11X10T2 8 11 10 4 4,1 21000 32000 0,0013
8Q-K8X11X10 8 11 10 4 4,1 21000 32000 0,002
K8X11X13 8 11 13 4,85 5,2 21000 32000 0,0026
K8X12X10T2 8 12 10 4,65 4,15 21000 32000 0,002
8Q-K8X12X12 8 12 12 5,6 5,3 21000 32000 0,0037
K8X12X13 8 12 13 5,05 4,65 21000 32000 0,0036
K9X12X10T2 9 12 10 4,55 5 20000 30000 0,0015
8Q-K9X12X10 9 12 10 4,3 4,6 20000 30000 0,002
K9X12X13 9 12 13 5,5 6,4 20000 30000 0,0021
K9X12X13T2 9 12 13 5,5 6,4 20000 30000 0,0021
K10X13X10T2 10 13 10 4,55 5,1 19000 28000 0,0016
K10X13X13 10 13 13 5,45 6,45 19000 28000 0,003
K10X14X8 10 14 8 4,3 3,95 19000 28000 0,0027
KMJ10X14X8.8XS 10 14 8,8 5,15 5,25 19000 28000 0,0028
K10X14X10 10 14 10 5,5 5,45 19000 28000 0,0034
8E-KV10X14X10.8XS 10 14 10,8 5,5 5,45 19000 28000 0,0039
8E-KV10X14X12.5X1S 10 14 12,5 6,6 6,9 19000 28000 0,0046
K10X14X13 10 14 13 6,6 6,9 19000 28000 0,0044
K10X16X12 10 16 12 7,1 5,95 19000 28000 0,0066
8Q-K10X16X12 10 16 12 7,1 5,95 19000 28000 0,0066
K11X14X10 11 14 10 5,05 6 18000 27000 0,0028
K12X15X10 12 15 10 5 6,1 17000 26000 0,0030
K12X15X10S 12 15 10 5 6,1 17000 26000 0,003
K12X15X13 12 15 13 6 7,7 17000 26000 0,0038
K12X15X13V1 12 15 13 6 7,7 17000 26000 0,0038
K12X15X20ZW 12 15 20 8,55 12,2 17000 26000 0,0059
K12X16X8 12 16 8 4,85 4,9 17000 26000 0,0034
K12X16X10X1S 12 16 10 4,85 4,9 17000 26000 0,0047
8Q-K12X16X13 12 16 13 7,5 8,5 17000 26000 0,006
K12X17X13 12 17 13 9 9,4 17000 26000 0,0075
K12X18X12 12 18 12 8,65 8 17000 26000 0,0089
8Q-K12X18X12 12 18 12 8,65 8 17000 26000 0,0089
K14X17X10 14 17 10 5,4 7,05 16000 24000 0,0035
K14X18X10 14 18 10 6,9 8 16000 24000 0,0046
K14X18X13 14 18 13 8,3 10,1 16000 24000 0,0063
K14X18X15S 14 18 15 9,65 12,3 16000 24000 0,0076
K14X18X17 14 18 17 10,9 14,4 16000 24000 0,0079
K14X20X12 14 20 12 9,35 9,15 16000 24000 0,0095
K15X18X14 15 18 14 7,85 11,6 15000 23000 0,006
K15X19X10 15 19 10 6,85 8,05 15000 23000 0,0055
K15X19X13 15 19 13 8,25 10,2 15000 23000 0,0067
K15X19X17 15 19 17 10,9 14,6 15000 23000 0,009
K15X19X24ZW 15 19 24 14,1 20,4 15000 23000 0,013
K15X20X13 15 20 13 10,1 11,5 15000 23000 0,0088
KMJ15X20X15.8XS 15 20 15,8 12,6 15,2 15000 23000 0,009
K15X21X15 15 21 15 11,9 12,5 15000 23000 0,013
KMJ15X21X17S 15 21 17 15,1 17,2 15000 23000 0,012
K15X21X21 15 21 21 16,5 19,1 15000 23000 0,017
K16X20X10 16 20 10 7,5 9,25 15000 23000 0,0057
K16X20X13 16 20 13 9,05 11,8 15000 23000 0,0071
K16X20X17S 16 20 17 11,9 16,8 15000 23000 0,0092
K16X22X12 16 22 12 11,7 12,5 15000 23000 0,01
…/…

With You 36
Needle roller and cage assemblies
Part numbers Dimensions (mm) Basic load rating (kN) Limiting speeds (tr/min) Mass (kg)

Fw Ew Bc dynamic static grease oil

KMJ16X22X13 16 22 13 12,6 13,9 15000 23000 0,011
K16X22X15.8X 16 22 15,8 13,6 15,2 15000 23000 0,014
K16X22X20 16 22 20 16 18,8 15000 23000 0,017
K17X21X10S 17 21 10 7,45 9,3 15000 22000 0,0056
K17X21X13S 17 21 13 9,4 12,6 15000 22000 0,0075
K17X21X15 17 21 15 10,4 14,4 15000 22000 0,0089
K17X21X17 17 21 17 11,8 16,9 15000 22000 0,0095
K17X22X20 17 22 20 14,7 19,2 15000 22000 0,015
K18X22X10 18 22 10 7,4 9,4 14000 21000 0,0061
K18X22X13 18 22 13 8,9 11,9 14000 21000 0,0077
K18X22X17 18 22 17 11,7 17 14000 21000 0,011
K18X23X20S 18 23 20 14,6 19,3 14000 21000 0,015
K18X24X12 18 24 12 12,3 13,8 14000 21000 0,012
K18X24X13 18 24 13 11,6 12,8 14000 21000 0,013
KMJ 18X24X17SV1 18 24 17 16 19,3 14000 21000 0,014
K18X24X20 18 24 20 17 20,9 14000 21000 0,019
K18X25X17 18 25 17 18 20,4 14000 21000 0,019
K18X25X22 18 25 22 22,1 26,6 14000 21000 0,024
K19X23X13S 19 23 13 9,65 13,5 14000 21000 0,0082
K19X23X17 19 23 17 12,7 19,2 14000 21000 0,011
K20X24X10S 20 24 10 8,3 11,2 13000 20000 0,0065
K20X24X13S 20 24 13 10 14,3 13000 20000 0,0086
K20X24X17S 20 24 17 13,2 20,4 13000 20000 0,011
K20X26X12 20 26 12 12,9 15,1 13000 20000 0,013
K20X26X13 20 26 13 14 16,7 13000 20000 0,015
KMJ20X26X13 20 26 13 14 16,7 13000 20000 0,012
KMJ20X26X17S 20 26 17 17,8 22,8 13000 20000 0,016
K20X26X20V2 20 26 20 18 23,1 13000 20000 0,019
KMJ20X26X20S 20 26 20 20,6 27,6 13000 20000 0,019
KMJ20X26X20SV3 20 26 20 20,6 27,6 13000 20000 0,019
KMJ20X28X19.8X4S 20 28 19,8 24,6 28,9 13000 20000 0,026
8Q-K20X28X25 20 28 25 27,1 32,5 13000 20000 0,039
K20X28X25V1 20 28 25 27,1 32,5 13000 20000 0,039
8Q-K21X25X13 21 25 13 10,3 15,1 13000 19000 0,0092
K21X25X17 21 25 17 13,6 21,5 13000 19000 0,012
K22X26X10 22 26 10 8,5 11,9 12000 18000 0,007
K22X26X10S 22 26 10 8,5 11,9 12000 18000 0,0071
K22X26X13 22 26 13 10,2 15,2 12000 18000 0,0094
K22X26X17 22 26 17 13,5 21,6 12000 18000 0,012
K22X26X17S 22 26 17 13,5 21,6 12000 18000 0,012
K22X27X20 22 27 20 17,5 25,9 12000 18000 0,02
K22X28X17 22 28 17 17,7 23,3 12000 18000 0,020
K22X28X17V1 22 28 17 17,7 23,3 12000 18000 0,02
K22X28X22.8X 22 28 22,8 22,7 32 12000 18000 0,028
K22X29X16 22 29 16 18,7 22,7 12000 18000 0,023
K22X30X15 22 30 15 19,3 21,7 12000 18000 0,022
KMJ23X29X17.8XS 23 29 18 20,6 28,8 11000 17000 0,019
K24X28X10 24 28 10 9 13,2 11000 17000 0,008
K24X28X10T 24 28 10 9 13,2 11000 17000 0,008
K24X28X13 24 28 13 10,8 16,8 11000 17000 0,01
K24X28X13S 24 28 13 10,8 16,8 11000 17000 0,01
K24X28X17 24 28 17 14,3 23,9 11000 17000 0,013
K24X30X17 24 30 17 18,4 25,2 11000 17000 0,022
K24X30X31ZW 24 30 31 27,9 43 11000 17000 0,039
K25X29X10 25 29 10 8,95 13,3 11000 16000 0,0083
K25X29X10S 25 29 10 8,95 13,3 11000 16000 0,0088
K25X29X13 25 29 13 10,8 16,9 11000 16000 0,01
K25X29X17S 25 29 17 14,2 24 11000 16000 0,014
K25X30X13 25 30 13 13,2 18,8 11000 16000 0,013
K25X30X17 25 30 17 17,4 26,8 11000 16000 0,018
K25X30X17S 25 30 17 17,4 26,8 11000 16000 0,017
K25X30X20S 25 30 20 19,4 31 11000 16000 0,021
K25X30X26ZW 25 30 26 36,5 71,5 11000 16000 0,027
K25X31X14 25 31 14 16,5 22,1 11000 16000 0,018
K25X31X17 25 31 17 18,3 25,3 11000 16000 0,022
K25X31X21 25 31 21 22,5 33 11000 16000 0,028
K25X32X16 25 32 16 19,5 24,7 11000 16000 0,027
KMJ25X33X24S 25 33 24 34,5 47 11000 16000 0,04
K25X33X24.4X 25 33 24,4 32 43 11000 16000 0,046
K25X35X29.8X2 25 35 29,8 42 53 11000 16000 0,072
PCJ162112 25,4 33,388 19,05 29,2 38,5 10000 15000 0,032
PCJ162116 25,4 33,388 25,4 38 54 10000 15000 0,044
K26X30X13 26 30 13 11,8 19,2 10000 15000 0,011
K26X30X17 26 30 17 15,5 27,4 10000 15000 0,015
K28X32X21 28 32 21 18,7 35,5 9500 14000 0,02
K28X33X13 28 33 13 13,9 20,9 9500 14000 0,015
K28X33X17S 28 33 17 18,3 29,8 9500 14000 0,02
K28X33X26ZW 28 33 26 23,9 42 9500 14000 0,033
K28X33X27 28 33 27 28,3 52 9500 14000 0,032
K28X34X14 28 34 14 17,5 24,8 9500 14000 0,02
K28X34X17 28 34 17 18,1 25,8 9500 14000 0,024
K28X35X16 28 35 16 21,2 28,4 9500 14000 0,029
K28X35X18 28 35 18 21,5 28,9 9500 14000 0,031
8Q-K28X36X46X1ZW 28 36 46 50 78,5 9500 14000 0,096
…/…

37 With You
 BC BC BC BC BC

øE W øF W øE W øF W øE W øF W øE W øF W øE W øF W

K K -- ZW KMJ KJ -- S KV -- S  
K -- T2 KMJ -- S
K -- S PCJ

Needle roller and cage assemblies

Part numbers Dimensions (mm) Basic load rating (kN) Limiting speeds (tr/min) Mass (kg)

Fw Ew Bc dynamic static grease oil

PCJ182420 28,275 38,1 31,75 53,5 77 9500 14000 0,073
K30X35X13 30 35 13 14,7 22,9 8500 13000 0,017
K30X35X13S 30 35 13 14,7 22,9 8500 13000 0,017
K30X35X17 30 35 17 19,4 32,5 8500 13000 0,023
KJ30X35X17S 30 35 17 18,8 31,5 8500 13000 0,021
K30X35X20S 30 35 20 21,6 37,5 8500 13000 0,025
K30X35X27 30 35 27 29,9 57 8500 13000 0,033
K30X35X27S 30 35 27 29,9 57 8500 13000 0,033
KMJ30X36X14 30 36 14 18,6 27,4 8500 13000 0,018
K30X37X16 30 37 16 21,9 30,5 8500 13000 0,029
K30X37X18 30 37 18 23,3 33 8500 13000 0,034
K30X37X20 30 37 20 26 37,5 8500 13000 0,038
KMJ30X37X20S 30 37 20 26,2 38 8500 13000 0,032
K30X43X54.8XZW 30 43 54,8 74,5 98 8500 13000 0,199
PCJ202624 31,75 41,275 38,1 65 101 8500 13000 0,096
K32X36X15S 32 36 15 14,3 26,4 8500 13000 0,017
K32X37X13 32 37 13 14,5 23 8500 13000 0,018
K32X37X17S 32 37 17 19,2 33 8500 13000 0,022
K32X37X27 32 37 27 29,6 57,5 8500 13000 0,037
KJ32X38X20S 32 38 20 25,1 41 8500 13000 0,031
K32X38X26 32 38 26 31,5 54 8500 13000 0,041
K32X39X16 32 39 16 22,6 32 8500 13000 0,033
K32X39X18 32 39 18 24 35 8500 13000 0,037
K32X39X20 32 39 20 26,8 40 8500 13000 0,041
K33X39X22.6X2T2 33 39 22,6 24,4 39,5 8000 12000 0,023
8Q-K34X46X51XZW 34 46 51 78,5 113 8000 12000 0,2
PCJ222820 34,925 44,45 31,75 60 94,5 7500 11000 0,09
K35X40X13 35 40 13 15,2 25,1 7500 11000 0,019
K35X40X17 35 40 17 20 36 7500 11000 0,025
KJ35X40X22.8X1S 35 40 22,8 22,3 41 7500 11000 0,028
K35X40X26ZW 35 40 26 26,1 50 7500 11000 0,037
GK35X40X26.8XS 35 40 26,8 28,1 55 7500 11000 0,021
K35X40X27 35 40 27 32 65 7500 11000 0,041
KJ35X40X27S 35 40 27 32 65 7500 11000 0,039
K35X40X30ZW 35 40 30 26,1 50 7500 11000 0,043
K35X40X30ZWS 35 40 30 26,1 50 7500 11000 0,043
K35X42X16 35 42 16 24,1 36 7500 11000 0,035
K35X42X18 35 42 18 24,7 37 7500 11000 0,039
K35X42X20 35 42 20 28,5 44,5 7500 11000 0,045
K35X42X30 35 42 30 39,5 68 7500 11000 0,062
K35X45X24.8X 35 45 24,8 43 59 7500 11000 0,084
KJ36X41X25.3XS 36 41 25,3 28,1 56 7500 11000 0,033
K37X42X17 37 42 24 21 38,5 7500 11000 0,027
KJ37X42X17S 37 42 17 21 38,5 7500 11000 0,026
K37X42X27 37 42 27 32,5 67,5 7500 11000 0,041
KJ37X42X27S 37 42 27 32,5 67,5 7500 11000 0,041
K38X43X17 38 43 17 20,9 38,5 7500 11000 0,028
K38X43X27 38 43 27 32 67,5 7500 11000 0,043
KJ38X43X29.8X1S 38 43 29,8 34,5 73,5 7500 11000 0,041
GK38X46X32 38 46 32 50,5 86,5 7500 11000 0,086
K38X46X32 38 46 32 54 95,5 7500 11000 0,073
PCJ243024 38,1 38,1 47,625 72,5 124 6500 10000 0,112
PCJ243020A 38,1 47,625 31,75 62 101 6500 10000 0,095
K40X45X13 40 45 13 16,5 29,2 6500 10000 0,023
K40X45X17 40 45 17 21,8 41,5 6500 10000 0,027
K40X45X21V2 40 45 21 26,7 54 6500 10000 0,035
K40X45X27 40 45 27 33,5 72,5 6500 10000 0,044
K40X47X18 40 47 18 27,7 45 6500 10000 0,045

…/…

With You 38
Needle roller and cage assemblies
Part numbers Dimensions (mm) Basic load rating (kN) Limiting speeds (tr/min) Mass (kg)

Fw Ew Bc dynamic static grease oil

K40X47X20 40 47 20 31 51,5 6500 10000 0,048
K40X48X20 40 48 20 33 51 6500 10000 0,052
HL-K40X55X29.8X4T2 40 55 29,8 72,5 93,5 6500 10000 0,103
K42X47X17 42 47 17 22,1 43 6500 9500 0,028
KJ42X47X23.8XS 42 47 23,8 28 58,5 6500 9500 0,036
K42X47X27 42 47 27 34 75,5 6500 9500 0,047
K42X48X17 42 48 17 25,7 46 6500 9500 0,036
K42X50X20 42 50 20 34 53,5 6500 9500 0,054
K43X48X17 43 48 17 22 43 6500 9500 0,029
K43X50X18 43 50 18 29,1 49 6500 9500 0,049
PCJ283416 44,45 53,975 25,4 55,5 92 6000 9000 0,086
PCJ283420 44,45 53,975 31,75 68 119 6000 9000 0,11
K45X49X19 45 49 19 22,1 52 6000 9000 0,027
K45X50X17 45 50 17 22,3 44,5 6000 9000 0,033
KJ45X50X17S 45 50 17 22,8 46 6000 9000 0,027
K45X50X27 45 50 27 34,5 78 6000 9000 0,05
K45X52X18 45 52 18 29,7 51 6000 9000 0,051
K45X53X20 45 53 20 36 59 6000 9000 0,062
KJ45X53X28S 45 53 28 49,5 90 6000 9000 0,078
K47X52X17 47 52 17 23,2 47,5 5500 8500 0,033
K47X52X27 47 52 27 35,5 83 5500 8500 0,051
K50X55X13.5 50 55 13,5 18,1 35,5 5500 8000 0,029
K50X55X20 50 55 20 27,9 62 5500 8000 0,042
K50X55X27 50 55 27 37 88,5 5500 8000 0,053
K50X55X30 50 55 30 39,5 97 5500 8000 0,059
K50X57X18 50 57 18 31,5 57 5500 8000 0,053
K50X58X20 50 58 20 38,5 67,5 5500 8000 0,065
K50X58X25 50 58 25 48,5 90 5500 8000 0,081
PCJ323816 50,8 60,325 25,4 58 102 5000 7500 0,094
PCJ323824 50,8 60,325 38,1 83 160 5000 7500 0,144
HL-K50.8X64.8X59.8XT2 50,8 64,8 59,8 137 235 5500 8000 0,29
K52X58X19 52 58 19 32 65,5 5000 7500 0,048
K55X60X20 55 60 20 28,8 66,5 5000 7500 0,045
K55X60X30 55 60 30 42 108 5000 7500 0,07
KV55X60X30S 55 60 30 42 108 5000 7500 0,069
K55X62X18 55 62 18 33,5 63 5000 7500 0,054
K55X63X20 55 63 20 39 70 5000 7500 0,073
K55X63X25 55 63 25 50,5 97,5 5000 7500 0,088
K55X63X32 55 63 32 61 125 5000 7500 0,117
K58X64X19 58 64 19 34 73,5 4700 7000 0,052
K60X65X20 60 65 20 29,8 71,5 4300 6500 0,051
K60X65X30 60 65 30 43,5 116 4300 6500 0,071
K60X66X22.8X2PX1 60 66 22,8 32 50 4300 6500 0,07
K60X66X32.8XZW 60 66 32,8 47,5 115 4300 6500 0,107
K60X68X20 60 68 20 40 75 4300 6500 0,077
K60X68X23 60 68 23 44,5 85 4300 6500 0,092
K60X68X25 60 68 25 52 105 4300 6500 0,097
K60X68X27 60 68 27 52 105 4300 6500 0,098
K61X66X20A 61 66 20 28,2 66,5 4300 6500 0,051
K63X70X21 63 70 21 44,5 95,5 4300 6500 0,075
PCJ404616 63,5 73,025 25,4 61,5 117 4000 6000 0,105
K64X70X16 64 70 16 28,4 60,5 4300 6500 0,053
K65X70X20 65 70 20 30,5 75 4000 6000 0,055
K65X70X30 65 70 30 45 124 4000 6000 0,083
K65X73X23 65 73 23 47 94 4000 6000 0,1
K65X73X30 65 73 30 61 132 4000 6000 0,126
K68X74X20 68 74 20 36 83,5 4000 6000 0,065
K68X74X35ZW 68 74 35 49,5 125 4000 6000 0,116
K68X75X21 68 75 21 45,5 101 4000 6000 0,077
K70X76X20 70 76 20 36,5 86 3700 5500 0,07
K70X76X30 70 76 30 53 139 3700 5500 0,1
K70X76X30A 70 76 30 49,5 127 3700 5500 0,105
K70X78X23 70 78 23 49,5 103 3700 5500 0,107
K70X78X30 70 78 30 65,5 149 3700 5500 0,136
K73X79X20 73 79 20 37,5 90 3700 5500 0,074
KMJ75X81X20 75 81 20 40,5 100 3700 5500 0,065
K75X81X30 75 81 30 56 152 3700 5500 0,108
K75X83X23 75 83 23 50,5 109 3700 5500 0,113
K75X83X30 75 83 30 67,5 157 3700 5500 0,147
K80X86X20 80 86 20 39 98 3300 5000 0,08
K80X86X30 80 86 30 57 159 3300 5000 0,11
K80X86X30A 80 86 30 57 159 3300 5000 0,11
K80X88X26 80 88 26 61 142 3300 5000 0,131
K80X88X30 80 88 30 69 166 3300 5000 0,157
KMJ85X92X18.8X 85 92 18,8 41,5 96,5 3100 4700 0,075
KMJ85X92X20 85 92 20 47,5 115 3100 4700 0,083
K85X92X30 85 92 30 66 176 3100 4700 0,142
K90X97X20 90 97 20 46 113 2900 4400 0,103
K90X97X24.8X 90 97 24,8 52 131 2900 4400 0,13
K90X98X27 90 98 27 64 157 2900 4400 0,15
K90X98X30 90 98 30 72,5 184 2900 4400 0,172

…/…

39 With You
 BC BC BC BC BC

øE W øF W øE W øF W øE W øF W øE W øF W øE W øF W

K K -- ZW KMJ KJ -- S KV -- S  
K -- T2 KMJ -- S
K -- S PCJ

Needle roller and cage assemblies

Part numbers Dimensions (mm) Basic load rating (kN) Limiting speeds (tr/min) Mass (kg)

Fw Ew Bc dynamic static grease oil

8Q-K95X102X20.8X3 95 102 20,8 49 125 2800 4200 0,109
K95X102X21 95 102 21 48 122 2800 4200 0,115
K95X102X31 95 102 31 70,5 199 2800 4200 0,172
KV100X107X21S 100 107 21 47,5 122 2700 4000 0,12
K100X107X21 100 107 21 49 127 2700 4000 0,124
K100X108X27 100 108 27 61 153 2700 4000 0,176
K100X108X30 100 108 30 76 201 2700 4000 0,19
K105X112X21 105 112 21 48,5 127 2500 3800 0,13
K105X113X30 105 113 30 77,5 210 2500 3800 0,198
K110X117X24 110 117 24 54,5 149 2400 3600 0,145
K110X118X30 110 118 30 79 219 2400 3600 0,217
K115X123X27 115 123 27 64 170 2300 3500 0,2
K120X127X24 120 127 24 57,5 165 2200 3300 0,16
K120X127X34 120 127 34 82 260 2200 3300 0,235
K125X133X35 125 133 35 87 260 2100 3200 0,275
K130X137X24 130 137 24 59 175 2100 3100 0,17
K130X137X34 130 137 34 84,5 277 2100 3100 0,24
K145X153X26 145 153 26 72 214 1900 2800 0,254
K145X153X36 145 153 36 100 325 1900 2800 0,335
K150X160X46 150 160 46 149 470 1800 2700 0,55
K155X163X26 155 163 26 73,5 224 1700 2600 0,27
K160X170X46 160 170 46 155 505 1700 2500 0,57
K185X195X37L1 185 195 37 131 425 1500 2200 0,581
K220X230X42 220 230 42 161 590 1200 1800 0,79

With You 40
 Bc
LW

øEW øF W

KBK

Needle roller and cage assemblies for connecting rod

Part numbers Dimensions (mm) Basic load rating (kN) Mass (kg)
Fw Ew Bc Lw dynamic static
8Q-KBK10X14X12.5X6 10 14 12,5 9,8 6,6 6,9 0,00515
KBK12X15X16.6V1 12 15 16,6 13,8 7,5 10,2 0,0056
KBK12X16X16V1 12 16 16 12,8 8,1 9,35 0,007
8Q-KBK12X17X14.2X2 12 17 14,2 11,8 9,75 10,4 0,009
KBK14X18X15.8X5 14 18 15,8 11,8 9,15 11,4 0,009
8Q-KBK14X18X16.5X 14 18 16,5 11,8 8,6 10,5 0,0078
KBK14X18X16.8X2 14 18 16,8 13,8 9,75 12,4 0,0079
KBK14X18X17.3X 14 18 17,3 13,8 9,75 12,4 0,009
KBK14X18X18.8X 14 18 18,8 14,8 11 14,4 0,01
KBK14X18X20V3 14 18 20 13,8 9,15 11,3 0,011
KBK15X19X17.3X 15 19 17,3 13,8 10,9 14,6 0,01
KBK15X19X19.8X 15 19 19,8 13,8 10,9 14,6 0,015
KBK15X20X17.3X 15 20 17,3 13,8 10,8 14,6 0,011
KBK16X20X17 16 20 17 13,8 10,8 14,7 0,01
KBK16X20X19.8 16 20 19,8 13,8 10,2 13,6 0,012
KBK16X20X19.8X3 16 20 19,8 14,8 11,4 15,8 0,013
KBK16X21X19.6X 16 21 19,6 15,8 13,9 17,6 0,016
KBK18X22X21.8X3 18 22 21,8 15,8 12,5 18,3 0,015
KBK18X22X23.8X1 18 22 23,8 17,8 13 19,3 0,016
KBK18X23X21.8X7 18 23 21,8 17,8 16,1 21,8 0,019
KBK20X25X29X3 20 25 29 22,8 21,5 33 0,0279

41 With You
 C C C C C1

C1 C1 C3

øD øF W øD øF W øD øF W øD øF W øD øFw

HK, HMK, DCL HK -- ZWD HK -- L HK -- LL BK BK - ZWD BK -- L

Drawn cup needle roller bearings

Part numbers Dimensions (mm) Lubrication Basic load ratings (kN) Limiting speeds (tr/min) Mass (kg) Appropriate
hole inner ring
Fw D C C1 max C2 on outer ring dynamic static grease oil
ou C1 Cr Cor
HK0306T2 3 6,5 6 0,925 0,565 33000 50000 0,0006 -
HKS3X6.5X6T2 3 6,5 6 0,94 0,575 33000 50000 0,00061 -
BK0408T2 4 8 8 1,6 1,77 1,27 30000 45000 0,0018 -
HK0408T2 4 8 8 1,77 1,27 30000 45000 0,0016 -
BK0509 5 9 9 1,6 2,64 2,19 27000 40000 0,0021 -
HK0509FM 5 9 9 2,45 1,99 27000 40000 0,0019 -
HK0509T2 5 9 9 2,64 2,19 27000 40000 0,0019 -
BK0609T2 6 10 9 1,6 2,66 2,28 25000 37000 0,0024 -
BK0609T2/2AS 6 10 9 1,6 2,66 2,28 25000 0,0024 -
HK0609FM 6 10 9 2,92 2,59 25000 37000 0,0022 -
HK0609T2 6 10 9 2,66 2,28 25000 37000 0,0022 -
DCL44T2 6,35 11,112 6,35 1,58 1,11 25000 38000 0,0022 -
DCL45T2 6,35 11,112 7,938 2,16 1,67 25000 38000 0,0033 -
DCL47T2 6,35 11,112 11,112 3,55 3,15 25000 38000 0,0038 -
BK0709 7 11 9 1,6 3,4 3,25 23000 34000 0,0027 -
BK0709CT 7 11 9 1,6 3,15 2,93 23000 34000 0,0027 -
HK0709 7 11 9 3,4 3,25 23000 34000 0,0025 -
HK0709FM 7 11 9 3,15 2,93 23000 34000 0,0025 -
DCL55 7,938 12,7 7,938 2,94 2,61 20000 30000 0,0032 -
BK0810 8 12 10 1,6 4,1 4,25 20000 30000 0,0034 1R5X8X12
BK0810C 8 12 10 1,6 3,85 3,95 20000 30000 0,0034 1R5X8X12
BK0810CT 8 12 10 1,6 3,85 3,95 20000 30000 0,0034 1R5X8X12
HK0810 8 12 10 4,1 4,25 20000 30000 0,0032 1R5X8X12
HK0810C 8 12 10 3,85 3,95 20000 30000 0,0032 1R5X8X12
HK0810C/5K 8 12 10 3,85 3,95 20000 30000 0,0032 1R5X8X12
HK0810FM 8 12 10 3,85 3,95 20000 30000 0,0032 1R5X8X12
HMK0810C 8 15 10 4,2 3,3 20000 30000 0,0067 1R5X8X12
HMK0812L/3AS 8 15 12 3,8 2,87 10000 0,0071 1R5X8X16
HMK0815 8 15 15 6,6 5,8 20000 30000 0,01 1R5X8X16
HMK0820T2 8 15 20 9,05 8,75 20000 30000 0,013 -
BK0910 9 13 10 1,6 4,75 5,3 18000 27000 0,0039 1R6X9X12
BK0912 9 13 12 1,6 5,65 6,65 18000 27000 0,0045 1R6X9X12
HK0910 9 13 10 4,6 5,05 18000 27000 0,0035 1R6X9X12
HK0910C 9 13 10 4,3 4,65 18000 27000 0,0035 1R6X9X12
HK0910FM 9 13 10 4,3 4,65 18000 27000 0,0035 1R6X9X12
HK0912F 9 13 12 5,4 6,25 18000 27000 0,0042 1R6X9X12
HMK0912 9 16 12 5,3 4,45 18000 27000 0,0087 1R6X9X16
DCL65 9,525 14,288 7,938 3,1 2,91 17000 25000 0,0037 -
DCL66 9,525 14,288 9,525 4,1 4,2 17000 25000 0,0045 -
BK1010 10 14 10 1,6 4,5 5,1 16000 24000 0,0042 1R7X10X10.5
BK1012 10 14 12 1,6 5,9 7,25 16000 24000 0,005 1R7X10X16
BK1015 10 14 15 1,6 7,1 9,15 16000 24000 0,0062 1R7X10X16
HK1010D 10 14 10 yes 4,5 5,1 16000 24000 0,0038 1R7X10X10.5
HK1010FM 10 14 10 4,5 5,1 16000 24000 0,0038 1R7X10X10.5
HK1012F 10 14 12 5,65 6,8 16000 24000 0,0045 1R7X10X10.5
HK1015F 10 14 15 7,25 9,4 16000 24000 0,0056 1R7X10X16
HMK1010 10 17 10 4,25 3,45 16000 24000 0,0079 1R7X10X10.5
HMK1012 10 17 12 5,6 4,85 16000 24000 0,0094 1R7X10X16
HMK1012L/3AS 10 17 12 4,25 3,45 10000 0,0084 1R7X10X16
HMK1014LL/3AS 10 17 14 4,25 3,45 10000 0,0089 1R7X10X16
HMK1015 10 17 15 7,4 6,95 16000 24000 0,012 1R7X10X16
HMK1020 10 17 20 10,2 10,5 16000 24000 0,016 -
BK1210 12 16 10 1,6 5,05 6,25 13000 20000 0,0052 1R8X12X10.5
BK1212V1 12 18 12 2,7 6,6 7,3 13000 20000 0,01 1R8X12X12.5
HK1210D 12 16 10 yes 5,05 6,25 13000 20000 0,0046 1R8X12X10.5
HK1210FM 12 16 10 5,05 6,25 13000 20000 0,0046 1R8X12X10.5
HK1212 12 18 12 6,6 7,3 13000 20000 0,0091 1R8X12X12.5
HK1212D 12 18 12 yes 6,6 7,3 13000 20000 0,0091 1R8X12X12.5
HK1212FM 12 18 12 6,6 7,3 13000 20000 0,0091 1R8X12X12.5
HK1214L/3AS 12 18 14 6,6 7,3 10000 0,011 1R9X12X16
HK1216LL/2AS 12 18 16 6,6 7,3 10000 0,012 -
…/…

With You 42
Drawn cup needle roller bearings
Part numbers Dimensions (mm) Lubrication Basic load ratings (kN) Limiting speeds (tr/min) Mass (kg) Appropriate
hole inner ring
Fw D C C1 max C2 on outer ring dynamic static grease oil
ou C1 Cr Cor
HK1216LL/3AS 12 18 16 6,6 7,3 10000 0,012 -
HMK1212 12 19 12 7,1 6,9 13000 20000 0,011 1R8X12X12.5
HMK1215 12 19 15 9,4 9,9 13000 20000 0,014 1R8X12X16
HMK1220 12 19 20 12,3 14 13000 20000 0,018 -
HMK1225 12 19 25 15,3 18,6 13000 20000 0,023 -
DCL85 12,7 17,462 7,938 3,55 3,7 13000 19000 0,0047 -
DCL86U3 12,7 17,462 9,525 4,7 5,35 13000 19000 0,0057 -
DCL88 12,7 17,462 12,7 6,7 8,5 13000 19000 0,008 -
SCE810A 12,7 17,462 15,875 8,6 12 12000 18000 0,0095 -
BK1312 13 19 12 2,7 6,95 7,9 12000 18000 0,011 1R10X13X12.5
HK1312 13 19 12 6,95 7,9 12000 18000 0,01 1R10X13X12.5
HK1312D 13 19 12 yes 6,95 7,9 12000 18000 0,01 1R10X13X12.5
7E-HKS13X20X12-3 13 20 12 7,55 7,65 12000 18000 0,011 1R10X13X12.5
7E-HK1412 14 20 12 7,2 8,5 11000 17000 0,011 1R10X14X13
BK1412 14 20 12 2,7 7,2 8,5 11000 17000 0,012 1R10X14X13
HK1412FM 14 20 12 2,7 7,2 8,5 11000 17000 0,011 1R10X14X13
HK1412V2 14 20 12 7,2 8,5 11000 17000 0,011 1R10X14X13
HK1414L/3AS 14 20 14 7,2 8,5 10000 0,012 1R10X14X16
HK1414L/5S 14 20 14 7,2 8,5 10000 0,012 1R10X14X16
HK1416 14 20 16 10,7 14 11000 17000 0,015 -
HK1416F 14 20 16 10,3 13,4 11000 17000 0,015 -
HK1416LL/3AS 14 20 16 7,2 8,5 10000 0,014 1R10X14X20
7E-HMK1416CT 14 22 16 11,5 12 11000 17000 0,019 1R10X14X20
HMK1420C 14 22 20 14,6 16,2 11000 17000 0,024 -
DCL98 14,288 19,05 12,7 7,2 9,65 11000 17000 0,0086 M1-060908
BK1512 15 21 12 2,7 7,5 9,1 11000 16000 0,013 1R12X15X12.5
BK1516 15 21 16 2,7 10,7 14,4 11000 16000 0,017 1R12X15X16.5
BK1522ZWD 15 21 22 2,7 yes 12,9 18,2 11000 16000 0,022 1R12X15X22.5
HK1512 15 21 12 7,5 9,1 11000 16000 0,011 1R12X15X12.5
HK1512D 15 21 12 yes 7,5 9,1 11000 16000 0,011 1R12X15X12.5
HK1512FM 15 21 12 7,5 9,1 11000 16000 0,011 1R12X15X12.5
HK1514L/3AS 15 21 14 7,5 9,1 10000 0,013 1R12X15X16.5
HK1516 15 21 16 10,7 14,4 11000 16000 0,015 1R12X15X16.5
HK1516D 15 21 16 yes 10,7 14,4 11000 16000 0,015 1R12X15X16.5
HK1516LL/3AS 15 21 16 7,5 9,1 10000 0,014 1R12X15X16.5
HK1522ZWD 15 21 22 yes 12,9 18,2 11000 16000 0,02 1R12X15X22.5
HMK1510 15 22 10 6,1 6 11000 16000 0,011 1R10X15X12.5
HMK1512 15 22 12 7,95 8,45 11000 16000 0,013 1R12X15X12.5
HMK1513L/3AS 15 22 13 13 6,1 6 10000 0,014 1R12X15X16
HMK1515C 15 22 15 10,5 12,1 11000 16000 0,016 1R12X15X16
HMK1516LL/3AS 15 22 16 7,5 9,1 10000 0,015 1R12X15X16.5
HMK1520 15 22 20 14,9 18,9 11000 16000 0,022 1R12X15X22.5
HMK1525V3 15 22 25 18,5 25 11000 16000 0,027 -
7E-HMK1525 15 22 25 18,5 25 11000 16000 0,027 -
DCL108 15,875 20,638 12,7 7,7 10,8 10000 15000 0,0091 -
7E-HKS15.8X20.6X19-1 15,875 20,638 19,05 12,5 20,8 10000 15000 0,012 -
7E-HKS15.8X20.6X22.2-1 15,875 20,638 22,22 14,5 25,2 10000 15000 0,014 -
BK1612 16 22 12 2,7 7,75 9,7 10000 15000 0,014 1R12X16X13
BK1616 16 22 16 2,7 11,1 15,3 10000 15000 0,018 1R12X16X20
BK1622ZWD 16 22 22 2,7 yes 13,3 19,4 10000 15000 0,023 -
HK1612 16 22 12 7,75 9,7 10000 15000 0,012 1R12X16X13
HK1612D 16 22 12 yes 7,75 9,7 10000 15000 0,012 1R12X16X13
HK1612FM 16 22 12 7,75 9,7 10000 15000 0,012 1R12X16X13
HK1614L/3AS 16 22 14 7,75 9,7 10000 0,013 1R12X16X16
HK1614L/5S 16 22 14 7,75 9,7 10000 0,013 1R12X16X16
HK1616D 16 22 16 yes 11,1 15,3 10000 15000 0,016 1R12X16X20
HK1616F 16 22 16 11,1 15,3 10000 15000 0,016 1R12X16X20
HK1616LL/3AS 16 22 16 7,75 9,7 10000 0,015 1R12X16X20
HK1622ZWD 16 22 22 yes 13,3 19,4 10000 15000 0,022 -
HMK1616 16 24 16 12,4 13,5 10000 15000 0,021 1R12X16X20
HMK1620 16 24 20 15,6 18,2 10000 15000 0,027 1R12X16X22
7E-HMK1620CT 16 24 20 15,6 18,2 10000 15000 0,027 1R12X16X22
HMK1626LL/3AS 16 24 26 15,6 18,2 10000 0,029 -
7E-HMK1720CT 17 24 20 15,2 20 9500 14000 0,0224 1R12X17X20.5
7E-HMK1725B 17 24 25 19,3 27,4 9500 14000 0,03 1R12X17X25.5
7E-HMK1725CT 17 24 25 19,3 26,7 9500 14000 0,03 1R12X17X25.5
7E-HMK1725CT/8A 17 24 25 19,3 26,7 9500 0,03 1R12X17X25.5
BK1712 17 23 12 2,7 8,5 11,1 9500 14000 0,015 -
BK1712CT 17 23 12 2,7 8,5 11,1 9500 14000 0,015 -
HK1712 17 23 12 2,7 8,5 11,1 9500 14000 0,012 -
HK1712D 17 23 12 yes 8,5 11,1 9500 14000 0,012 -
HK1712FM 17 23 12 8,05 10,3 9500 14000 0,012 -
HK1712FMD 17 23 12 yes 8,05 10,3 9500 14000 0,012 -
HMK1715 17 24 15 12,1 15 9500 14000 0,018 1R14X17X17
HMK1720C 17 24 20 15,2 20 9500 14000 0,024 1R12X17X20.5
HMK1721LL/3AS 17 24 21 12,1 15 9500 0,02 1R12X17X25.5
DCL118 17,462 22,225 12,7 8,15 12 9500 14000 0,011 -
BK1812 18 24 12 2,7 8,3 10,9 9000 13000 0,015 1R15X18X12.5
BK1816 18 24 16 2,7 11,8 17,3 9000 13000 0,02 1R15X18X16.5
HK1812 18 24 12 8,3 10,9 9000 13000 0,013 1R15X18X12.5
HK1812FM 18 24 12 8,3 10,9 9000 13000 0,013 1R15X18X12.5
HK1814L/3AS 18 24 14 8,3 10,9 9000 0,015 1R15X18X16
…/…

43 With You
 C C C C C1

C1 C1 C3

øD øF W øD øF W øD øF W øD øF W øD øFw

HK, HMK, DCL HK -- ZWD HK -- L HK -- LL BK BK - ZWD BK -- L

Drawn cup needle roller bearings

Part numbers Dimensions (mm) Lubrication Basic load ratings (kN) Limiting speeds (tr/min) Mass (kg) Appropriate
hole inner ring
Fw D C C1 max C2 on outer ring dynamic static grease oil
ou C1 Cr Cor
HK1816D 18 24 16 yes 11,8 17,3 9000 13000 0,018 1R15X18X16.5
HK1816F 18 24 16 11,8 17,3 8500 13000 0,018 1R15X18X16.5
HK1816LL/3AS 18 24 16 8,3 10,9 9000 0,017 1R15X18X17.5
HMK1815 18 25 15 12 15,1 9000 13000 0,019 1R15X18X16
HMK1819 18 25 19 15,5 20,9 9000 13000 0,024 1R15X18X20.5
HMK1820 18 25 20 16,3 22,3 9000 13000 0,025 1R15X18X20.5
HMK1825 18 25 25 20,3 29,6 9000 13000 0,031 1R15X18X25.5
HMK1916 19 27 16 13,9 16,3 8500 13000 0,025 1R15X19X20
DCL128 19,05 25,4 12,7 9,8 11,9 8500 13000 0,014 M1-081210
SCE1210A 19,05 25,4 15,875 12,8 18,4 8000 12000 0,019 M1-081210
SCE1212A 19,05 25,4 19,05 15,8 24,1 8000 12000 0,023 M1-081212
BK2016 20 26 16 2,7 13 20,1 8000 12000 0,022 1R17X20X16.5
BK2016D 20 26 16 2,7 yes 13 20,1 8000 12000 0,022 1R17X20X16.5
BK2020 20 26 20 2,7 16,4 27,1 8000 12000 0,027 1R17X20X20.5
BK2020CT 20 26 20 2,7 16,4 27,1 8000 12000 0,027 1R17X20X20.5
BK2030ZWD 20 26 30 2,7 yes 22,2 40 8000 12000 0,037 1R17X20X30.5
HK2012FM 20 26 12 8,75 12,1 8000 12000 0,014 1R15X20X13
HK2016D 20 26 16 yes 13 20,1 8000 12000 0,019 1R17X20X16.5
HK2016F 20 26 16 12,5 19,2 8000 12000 0,019 1R17X20X16.5
HK2016LL/3AS 20 26 16 9,25 13 8000 0,019 1R15X20X18
HK2018L/3AS 20 26 18 13 20,1 8000 0,021 1R17X20X20
HK2020F 20 26 20 16 26,2 8000 12000 0,024 1R17X20X20.5
HK2020FD 20 26 20 yes 16 26,2 8000 12000 0,024 1R17X20X20.5
HK2020LL/2AS 20 26 20 13 20,1 8000 0,024 1R17X20X20.5
HK2020LL/3AS 20 26 20 13 20,1 8000 0,024 1R17X20X20.5
HK2030ZWD 20 26 30 yes 22 40 8000 12000 0,035 1R17X20X30.5
HKS20X29X18-1PX1/L118 20 29 18 14,1 15,3 8000 0,029 1R17X20X20
HKS20X29X18-1PX1/L260 20 29 18 14,1 15,3 8000 0,029 1R17X20X20
HKS20X29X18-1PX1/L588 20 29 18 14,1 15,3 8000 0,029 1R17X20X20
HMK2015 20 27 15 13 17,3 8000 12000 0,021 1R17X20X16.5
HMK2018L/L118 20 27 18 13 17,3 8000 0,022 1R17X20X20
HMK2020 20 27 20 17,7 25,6 8000 12000 0,027 1R17X20X20.5
HMK2025 20 27 25 22 34 8000 12000 0,034 1R15X20X26
HMK2025C 20 27 25 22 34 8000 12000 0,034 1R15X20X26
HMK2030 20 27 30 26,1 42 8000 12000 0,041 1R17X20X30.5
7E-HMK2215 22 29 15 13,4 18,5 7500 11000 0,022 1R17X22X16D
7E-HMK2230 22 29 30 26,9 45 7500 11000 0,045 1R17X22X32
BK2212 22 28 12 2,7 9,75 14,3 7500 11000 0,015 1R17X22X13
BK2216 22 28 16 2,7 13,6 22,1 7500 11000 0,024 1R17X22X18
BK2220 22 28 20 2,7 17,2 29,8 7500 11000 0,03 1R17X22X20.5
HK2212 22 28 12 9,75 14,3 7500 11000 0,013 1R17X22X13
HK2212FM 22 28 12 9,2 13,4 7500 11000 0,013 1R17X22X13
HK2216F 22 28 16 13,2 21,1 7500 11000 0,021 1R17X22X18
HK2216D 22 28 16 yes 13,6 22,1 7500 11000 0,021 1R17X22X18
HK2216LL/3AS 22 28 16 9,75 14,3 7500 0,02 1R17X22X18
HK2218L/3AS 22 28 18 13,6 22,1 7500 0,024 1R17X22X20.5
HK2220D 22 28 20 yes 17,2 29,8 7500 11000 0,026 1R17X22X20.5
HK2220F 22 28 20 16,8 28,8 7500 11000 0,026 1R17X22X20.5
HK2220LL/3AS 22 28 20 13,6 22,1 7500 0,026 1R17X22X23
HMK2210 22 29 10 8,4 10,1 7500 11000 0,015 1R17X22X13
HMK2218L/3AS 22 29 18 13,4 18,5 7500 0,024 1R17X22X20.5
HMK2220C/8A 22 29 20 18,2 27,4 7500 0,03 1R17X22X20.5
HMK2220PX1 22 29 20 18,2 27,4 7500 11000 0,03 1R17X22X20.5
HMK2225 22 29 25 23,6 38,5 7500 11000 0,037 1R17X22X26
HMK2230 22 29 30 26,9 45 7500 11000 0,045 1R17X22X32
HMK2420F 24 31 20 18,8 29,1 6500 10000 0,032 -
HMK2420CT 24 31 20 18,3 28,2 6500 10000 0,032 -
7E-HKS25X32X30/8A 25 32 30 26,4 46 6500 0,049 1R20X25X32
BK2512 25 32 12 2,7 11,8 16,3 6500 9500 0,023 1R20X25X12.5
BK2516 25 32 16 2,7 15,9 24 6500 9500 0,031 1R20X25X17
BK2520 25 32 20 2,7 20,3 33 6500 9500 0,039 1R20X25X20.5
…/…

With You 44
Drawn cup needle roller bearings
Part numbers Dimensions (mm) Lubrication Basic load ratings (kN) Limiting speeds (tr/min) Mass (kg) Appropriate
hole inner ring
Fw D C C1 max C2 on outer ring dynamic static grease oil
ou C1 Cr Cor
BK2526 25 32 26 2,7 26,4 46 6500 9500 0,049 1R20X25X26.5
BK2538ZWD 25 32 38 2,7 yes 35 65,5 6500 9500 0,069 1R20X25X38.5
HK2512F 25 32 12 11,1 15,2 6500 9500 0,021 1R20X25X12.5
HK2516D 25 32 16 yes 15,9 24 6500 9500 0,027 1R20X25X17
HK2516F 25 32 16 15,9 24 6500 9500 0,027 1R20X25X17
HK2516LL/3AS 25 32 16 11,8 16,3 6500 0,027 1R20X25X18D
HK2518L/3AS 25 32 18 15,9 24 6500 0,031 1R20X25X20
HK2518L/5S 25 32 18 15,9 24 6500 0,031 1R20X25X20
HK2520 25 32 20 20,3 33 6500 9500 0,034 1R20X25X20.5
HK2520D 25 32 20 yes 20,3 33 6500 9500 0,034 1R20X25X20.5
HK2520LL/3AS 25 32 20 15,9 24 6500 0,033 1R20X25X20.5
HK2526 25 32 26 26,4 46 6500 9500 0,045 1R20X25X26.5
HK2526D 25 32 26 yes 26,4 46 6500 9500 0,045 1R20X25X26.5
HK2538ZWD 25 32 38 yes 35 65,5 6500 9500 0,065 1R20X25X38.5
HKS25X33X18PX1/L588 25 33 18 17,1 23,3 6500 0,033 1R20X25X20
HMK2510 25 33 10 9,15 10,4 6500 9500 0,019 1R20X25X12.5
HMK2515F 25 33 15 15,2 19,9 6500 9500 0,029 1R20X25X16
HMK2520 25 33 20 21,8 31,5 6500 9500 0,039 1R20X25X20.5
HMK2525 25 33 25 26,7 41 6500 9500 0,048 1R20X25X26.5
HMK2526LL/3AS 25 33 26 21,8 31,5 6500 0,043 1R20X25X26.5
HMK2530 25 33 30 32,5 53 6500 9500 0,058 1R20X25X32
DCL1612 25,4 31,75 19,05 18,6 29,5 6500 9500 0,031 M1-121612
DCL1616 25,4 31,75 25,4 25,4 44 6500 9500 0,038 M1-121616
7E-HMK2616 26 34 16 17,1 23,4 6000 9000 0,032 1R22X26X20
7E-HMK2620CT 26 34 20 21,1 30,5 6000 9000 0,04 -
HMK2620BV1 26 34 20 21,6 31,5 6000 9000 0,04 -
7E-BKS28X40X17-2 28 40 17 22,6 24,6 5500 8500 0,054 1R22X28X20.5
7E-BKS28X45X18 28 45 18 28,1 26,6 5500 8500 0,085 1R22X28X20.5
7E-HKS28X35X30/8A 28 35 30 28,2 52 5500 0,054 -
7E-HKS28X35X33/8A 28 35 33 28,2 52 5500 0,058 -
8Q-HMK2830/8A 28 37 30 35 54,5 5500 0,073 -
BK2820 28 35 20 2,7 21,3 36 5500 8500 0,043 1R22X28X20.5
HK2816F 28 35 16 16,7 26,4 5500 8500 0,03 1R22X28X17
HK2820 28 35 20 21,3 36 5500 8500 0,038 1R22X28X20.5
HK2820D 28 35 20 yes 21,3 36 5500 8500 0,038 1R22X28X20.5
HK2820LL/3AS 28 35 20 17,3 27,6 5500 0,037 1R22X28X23
HMK2820 28 37 20 23,6 32,5 5500 8500 0,049 1R22X28X20.5
HMK2830 28 37 30 35 54,5 5500 8500 0,073 -
DCL1816 28,575 34,925 25,4 27,4 50,5 5500 8500 0,043 M1-141816
HMK2920 29 38 20 24,6 35 5500 8500 0,05 -
7E-8Q-HK3016 30 37 16 18,1 30 5500 8000 0,032 1R25X30X17
7E-HK3016C 30 37 16 18,1 30 5500 8000 0,032 1R25X30X17
7E-HKS30X37X30-6/8A 30 37 30 28,5 54 5500 0,066 1R25X30X32
BK3016 30 37 16 2,7 18,1 30 5500 8000 0,037 1R25X30X17
BK3020 30 37 20 2,7 22,3 39,5 5500 8000 0,047 1R25X30X20.5
BK3026 30 37 26 2,7 28,5 54 5500 8000 0,059 1R25X30X26.5
BK3038ZWD 30 37 38 2,7 yes 38,5 78,5 5500 8000 0,083 1R25X30X38.5
HK3012F 30 37 12 13 19,5 5500 8000 0,024 1R25X30X12.5
HK3016LL/3AS 30 37 16 13 19,5 5500 0,027 1R25X30X18D
HK3016V3 30 37 16 18,1 30 5500 8000 0,032 1R25X30X17
HK3018L 30 37 18 18,1 30 5500 0,037 1R25X30X20.5
HK3018L/3AS 30 37 18 18,1 30 5500 0,037 1R25X30X20.5
HK3020D 30 37 20 yes 22,3 39,5 5500 8000 0,04 1R25X30X20.5
HK3020F 30 37 20 22,3 39,5 5500 8000 0,04 1R25X30X20.5
HK3020LL/3AS 30 37 20 18,1 30 5500 0,039 1R25X30X23
HK3026D 30 37 26 yes 29,1 55 5500 8000 0,053 1R25X30X26.5
HK3026F 30 37 26 28,5 54 5500 8000 0,053 1R25X30X26.5
HK3038ZWD 30 37 38 yes 38,5 78,5 5500 8000 0,076 1R25X30X38.5
HKS30X37X30-1/3AS 30 37 30 27,4 51 5500 0,055 1R25X30X32
HKS30X37X45.5-2ZW/3AS 30 37 45,5 33 64,5 5500 0,089 -
HMK3015 30 40 15 17,1 22,1 5500 8000 0,044 1R25X30X16
HMK3020 30 40 20 24,2 34,5 5500 8000 0,058 1R25X30X20.5
HMK3025 30 40 25 31 47 5500 8000 0,073 1R25X30X26.5
HMK3026LL/3AS 30 40 26 24,2 34,5 5500 0,064 1R25X30X26.5
HMK3030 30 40 30 36 57,5 5500 8000 0,087 1R25X30X32
HMK3031LL/3AS 30 40 31 31 47 5500 0,078 1R25X30X32
SCE1916A 30,162 38,1 25,4 32 55,5 5500 8000 0,057 -
DCL2010 31,75 38,1 15,875 16,4 27 5000 7500 0,029 -
7E-HKS32X40X30-1 32 40 30 38 69,5 5000 7500 0,071 -
7E-HMK3220 32 42 20 27,5 38 5000 7500 0,062 -
7E-HMK3230 32 42 30 41,5 64,5 5000 7500 0,092 -
HKS32X39X34-1 32 39 34 39,5 84 5000 7500 0,071 -
HKS32X39X37-1/3AS 32 39 37 39,5 84 5000 0,078 -
7E-HKS33X38X8 33 38 8 4,8 7,65 5000 7500 0,011 -
DCL228F 34,925 41,275 12,7 13,4 21,4 4700 7000 0,027 -
BK3520 35 42 20 2,7 24,8 47,5 4700 7000 0,055 -
HK3512 35 42 12 14 22,8 4700 7000 0,028 -
HK3516F 35 42 16 19 33,5 4700 7000 0,037 -
HK3516LL/3AS 35 42 16 14 22,8 4600 0,036 -
HK3518L/3AS 35 42 18 19,7 35 4600 0,037 -
HK3520 35 42 20 24,8 47,5 4700 7000 0,046 -
HK3520D 35 42 20 yes 24,8 47,5 4700 7000 0,046 -
…/…

45 With You
 C C C C C1

C1 C1 C3

øD øF W øD øF W øD øF W øD øF W øD øFw

HK, HMK, DCL HK -- ZWD HK -- L HK -- LL BK BK - ZWD BK -- L

Drawn cup needle roller bearings

Part numbers Dimensions (mm) Lubrication Basic load ratings (kN) Limiting speeds (tr/min) Mass (kg) Appropriate
hole inner ring
Fw D C C1 max C2 on outer ring dynamic static grease oil
ou C1 Cr Cor
HK3520LL/3AS 35 42 20 19,7 35 4600 0,04 -
HMK3512 35 45 12 14,9 17,6 4700 7000 0,04 -
HMK3515 35 45 15 20,2 26,2 4700 7000 0,05 -
HMK3518L/3AS 35 45 18 20,2 26,2 4600 0,053 -
HMK3520 35 45 20 28,4 40,5 4700 7000 0,067 -
HMK3525 35 45 25 36 54,5 4700 7000 0,083 -
HMK3530 35 45 30 43 69 4700 7000 0,1 -
HMK3531LL/3AS 35 45 31 36 54,5 4600 0,089 -
7E-HKS36X44X30PX1 36 44 30 39,5 76 4300 6500 0,077 -
HMK3825 38 48 25 38,5 61 4300 6500 0,09 -
HMK3830 38 48 30 46 77 4300 6500 0,107 1R32X38X32
DCL2414 38,1 47,625 22,225 32 50,5 4300 6500 0,076 M1-202416
BK4020 40 47 20 2,7 25,9 52,5 4000 6000 0,064 1R35X40X20.5
HK4012 40 47 12 15,1 26 4000 6000 0,031 1R35X40X12.5
HK4016F 40 47 16 20,3 38,5 4000 6000 0,041 1R35X40X17
HK4016LL/3AS 40 47 16 15,1 26 4000 0,041 1R35X40X17
HK4018L/3AS 40 47 18 21,1 40 4000 0,047 1R35X40X20
HK4020 40 47 20 2,7 32,5 50 4000 6000 0,075 1R35X40X20.5
HK4020D 40 47 20 yes 25,9 52,5 4000 6000 0,052 1R35X40X20.5
HK4020LL/3AS 40 47 20 21,1 40 4000 0,05 -
HK4020LLD/3AS 40 47 20 yes 21,1 40 4000 0,05 -
HMK4015V3 40 50 15 23,1 32,5 4000 6000 0,056 1R35X40X17
7E-HMK4020 40 50 20 32,5 50 4000 6000 0,075 1R35X40X20.5
7E-HMK4025 40 50 25 41 67,5 4000 6000 0,091 -
HMK4030 40 50 30 49 85 4000 6000 0,112 1R35X40X34
HMK4031LL/3AS 40 50 31 41 67,5 4000 0,1 1R35X40X36
HMK4040ZWD 40 50 40 yes 58,5 107 4000 6000 0,15 -
DCL2812 44,45 53,975 19,05 29,2 47,5 3700 5500 0,074 M1-242812
DCL2816 44,45 53,975 25,4 40,5 72 3700 5500 0,099 M1-242816
DCL2824 44,45 53,975 38,1 62 126 3700 5500 0,149 -
HKS45X52X12-3 45 52 12 16 29,3 3700 5500 0,033 -
HK4516 45 52 16 21,6 43 3700 5500 0,046 1R40X45X17
HK4518L/3AS 45 52 18 21,6 43 3600 0,054 1R40X45X20
HK4520 45 52 20 27,6 59 3700 5500 0,058 1R40X45X20.5
HK4520D 45 52 20 yes 27,6 59 3700 5500 0,058 1R40X45X20.5
HK4520LL/3AS 45 52 20 21,6 43 3600 0,054 -
HMK4520 45 55 20 32 51 3700 5500 0,083 1R40X45X20.5
HMK4525 45 55 25 41,5 71,5 3700 5500 0,104 1R40X45X26.5
HMK4530 45 55 30 49,5 90 3700 5500 0,1225 1R40X45X34
HK5020 50 58 20 31,5 63 3200 4800 0,072 1R40X50X22
HK5022L/3AS 50 58 22 31,5 63 3200 0,086 1R45X50X25.5
HK5024LLD/3AS 50 58 24 yes 31,5 63 3200 0,089 1R45X50X25.5
HK5025 50 58 25 38,5 82 3200 4800 0,09 1R45X50X25.5
HK5024LL/3AS 50 58 24 31,5 63 3200 0,089 1R45X50X25.5
DCL3216 50,8 60,325 25,4 44 83,5 3100 4700 0,112 -

With You 46
 C C C C C
rs rs    rs rs rs rs rs

øD øF W øD øF W øD øF W øD øFw øD øF W

NK (ØFw 12 mm) RNA49 (ØFw 12 mm) RNA49 -- R (ØFw 14 mm) NKS (ØFw 43 mm) RNA69 (ØFw 40 mm) RNA49 -- L RNA49 -- LL
NKS (ØFw 40 mm) RNA59 (avec
(with étanchéité
single seal) (avec double
(with étanchéité
seal)
RNA69 -- R d’un côté) des deux côtés)
NK -- R (ØFw 14 mm)

Needle roller bearings with solid rings, without inner ring

Part numbers Dimensions (mm) Basic load rating (kN) Limiting speeds (tr/mn) Mass (kg)
Fw D C rs min dynamic static grease oil
Cr Cor (tr/min) (tr/min)

4
NK5/10T2 5 10 10 0,15 2,64 2,19 27000 40000 0,0031
NK5/12T2 5 10 12 0,15 2,72 2,25 27000 40000 0,0037
NK6/10T2 6 12 10 0,15 2,66 2,28 25000 37000 0,0047
NK6/12T2 6 12 12 0,15 3,4 3,15 25000 37000 0,0057
NK7/10T2 7 14 10 0,3 2,67 2,35 23000 34000 0,0069
NK7/12T2 7 14 12 0,3 3,4 3,2 23000 34000 0,0082
RNA496 8 15 10 0,15 3,15 3 21000 32000 0,0073
NK8/16 8 15 16 0,3 4,85 5,2 21000 32000 0,012
NK8/12T2 8 15 12 0,3 4 4,1 21000 32000 0,0087
NK9/12T2 9 16 12 0,3 4,55 5 20000 30000 0,01
NK9/16T2 9 16 16 0,3 5,5 6,4 20000 30000 0,013
RNA498 10 19 11 0,15 4,3 3,95 19000 28000 0,015
NK10/12T2 10 17 12 0,3 4,55 5,1 19000 28000 0,01
NK10/16 10 17 16 0,3 5,45 6,45 19000 28000 0,015
NK12/12 12 19 12 0,3 5 6,1 17000 26000 0,013
RNA499 12 20 11 0,3 4,85 4,9 17000 26000 0,013
8E-NK12X19X12-7 12 19 12 0,5 6,05 5,65 17000 26000 0,011
NK12/16 12 19 16 0,3 6 7,7 17000 26000 0,016
RNA4900R 14 22 13 0,3 8,6 9,2 16000 24000 0,017
RNA4900L/3AS 14 22 13 0,3 7,2 8,5 10000 0,016
RNA4900LL/3AS 14 22 13 0,3 7,2 8,5 10000 0,016
NK14/16R 14 22 16 0,3 10,3 11,5 16000 24000 0,021
NK14/20R 14 22 20 0,3 13 15,6 16000 24000 0,026
NK15/16R 15 23 16 0,3 10,9 12,7 15000 23000 0,022
NK15/20R 15 23 20 0,3 13,8 17,2 15000 23000 0,027
8E-NK15X25X12-3 15 25 12 0,8 8,15 8,75 15000 23000 0,021
MR101812 15,875 28,575 19,05 0,6 16,7 16,7 17000 25000 0,05
RNA4901R 16 24 13 0,3 9,55 10,9 15000 23000 0,017
RNA4901L/3AS 16 24 13 0,3 7,75 9,7 10000 0,018
RNA4901LL/3AS 16 24 13 0,3 7,75 9,7 10000 0,018
RNA6901R 16 24 22 0,3 15,4 20 15000 23000 0,031
NK16/16R 16 24 16 0,3 12,2 14,9 15000 23000 0,022
NK16/20R 16 24 20 0,3 14,6 18,8 15000 23000 0,028
NK17/16R 17 25 16 0,3 12,1 15 15000 22000 0,024
NK17/20R 17 25 20 0,3 15,4 20,4 15000 22000 0,03
NK17.7X30X17-1PX1 17,759 30 17 0,3 2,49 2,78 15000 22000 0,049
NK18/16R 18 26 16 0,3 12,7 16,2 14000 21000 0,025
NK18/20RCT 18 26 20 0,3 16,1 22 14000 21000 0,031
NK19/16R 19 27 16 0,3 13,3 17,4 14000 21000 0,026
NK19/20R 19 27 20 0,3 16 22,2 14000 21000 0,032
MR122012 19,05 31,75 19,05 1 19,5 21,1 14000 21000 0,055
MR122016 19,05 31,75 25,4 1 25 29,1 14000 21000 0,073
RNA4902R 20 28 13 0,3 10,3 12,8 13000 20000 0,022
RNA4902L/3AS 20 28 13 0,3 8,3 11,2 10000 0,022
RNA4902LL/3AS 20 28 13 0,3 8,3 11,2 10000 0,022
RNA6902R 20 28 23 0,3 17,6 25,3 13000 20000 0,04
NK20/16RCT 20 28 16 0,3 13,2 17,5 13000 20000 0,027
NK20/16R/LP03 20 28 16 0,3 13,2 17,5 13000 0,027
NK20/20R 20 28 20 0,3 16,7 23,8 13000 20000 0,034
NK20X32X14PX1 20 32 14 0,3 16,1 16,8 13000 20000 0,039
8E-NK20X32X12 20 32 12 0,3 12,2 11,8 13000 20000 0,033
NKS20 20 32 20 0,3 17,8 22,8 13000 20000 0,049
NK21/16R 21 29 16 0,3 13,7 18,7 13000 19000 0,028
NK21/20R 21 29 20 0,3 17,4 25,4 13000 19000 0,035
RNA4903R 22 30 13 0,3 11,2 14,6 12000 18000 0,022
RNA4903L/3AS 22 30 13 0,3 8,5 11,9 9000 0,022
RNA4903LL/3AS 22 30 13 0,3 8,5 11,9 9000 0,022
RNA5903 22 30 18 0,3 15,2 21,7 12000 18000 0,035
RNA6903R 22 30 23 0,3 18,2 27,2 12000 18000 0,042
NK22/16R 22 30 16 0,3 14,2 19,9 12000 18000 0,034

…/…

47 With You
 C C C C C
rs rs    rs rs rs rs rs

øD øF W øD øF W øD øF W øD øFw øD øF W

NK (ØFw 12 mm) RNA49 (ØFw 12 mm) RNA49 -- R (ØFw 14 mm) NKS (ØFw 43 mm) RNA69 (ØFw 40 mm) RNA49 -- L RNA49 -- LL
NKS (ØFw 40 mm) RNA59 (avec
(with étanchéité
single seal) (avec double
(with étanchéité
seal)
RNA69 -- R d’un côté) des deux côtés)
NK -- R (ØFw 14 mm)

Needle roller bearings with solid rings, without inner ring

Part numbers Dimensions (mm) Basic load rating (kN) Limiting speeds (tr/mn) Mass (kg)
Fw D C rs min dynamic static grease oil
Cr Cor (tr/min) (tr/min)
NK22/20R 22 30 20 0,3 18 27 12000 18000 0,037
NKS22 22 35 20 0,6 17,7 23,3 12000 18000 0,062
MR142212 22,225 34,925 19,05 1 21,9 25,6 12000 18000 0,059
MR142216 22,225 34,925 25,4 1 28,2 35,5 12000 18000 0,082
NK24/16R 24 32 16 0,3 15,2 22,3 11000 17000 0,032
NK24/20R 24 32 20 0,3 18,6 28,8 11000 17000 0,04
8Q-NK24X36X14 24 36 14 0,5 17,4 19,4 11000 17000 0,043
NKS24R 24 37 20 0,6 18,4 25,2 11000 17000 0,066
RNA4904RCT 25 37 17 0,3 21,3 25,5 11000 16000 0,052
RNA4904L/3AS 25 37 17 0,3 15,2 19,9 8000 0,055
RNA4904LL/3AS 25 37 17 0,3 15,2 19,9 8000 0,055
RNA6904R 25 37 30 0,3 36,5 50,5 11000 16000 0,1
NK25/16R 25 33 16 0,3 15,1 22,4 11000 16000 0,033
NK25/20RCT 25 33 20 0,3 19,2 30,5 11000 16000 0,042
NKS25R 25 38 20 0,6 18,3 25,3 11000 16000 0,068
NK25X45X17.5NRPX1 25 45 17,5 1,1 16,7 15,5 11000 16000 0,131
NK25X45X18.5-2NR 25 45 18,5 1,1 29,2 31,5 7500 11000 0,131
MR162412 25,4 38,1 19,05 1 23 28,1 11000 16000 0,068
MR162416 25,4 38,1 25,4 1 29,5 38,5 11000 16000 0,091
NK25.5X47X22PX1 25,56 47 22 0,5 42,5 50,5 11000 16000 0,177
NK26/16R 26 34 16 0,3 15,6 23,6 10000 15000 0,034
NK26/20R 26 34 20 0,3 19,1 30,5 10000 15000 0,042
8Q-NK26X35X25-1/3AS 26 35 25 0,3 21,5 36 10000 0,062
RNA49/22R 28 39 17 0,3 23,2 29,3 9500 14000 0,05
RNA69/22R 28 39 30 0,3 40 58,5 9500 14000 0,1
NK28/20R 28 37 20 0,3 22,3 34 9500 14000 0,052
NK28/30RCT 28 37 30 0,3 26,7 48 9500 14000 0,082
NKS28R 28 42 20 0,6 18,1 25,8 9500 14000 0,084
MR182616 28,575 41,275 25,4 1 32,5 45 9500 14000 0,1
MR182620 28,575 41,275 31,75 1 40,5 60 9500 14000 0,127
NK29/20R 29 38 20 0,3 22,2 34 9500 14000 0,054
NK29/30R 29 38 30 0,3 27,5 50,5 9500 14000 0,084
RNA4905R 30 42 17 0,3 24 31,5 8500 13000 0,061
RNA4905L/3AS 30 42 17 0,3 16 22,6 6500 0,063
RNA4905LL/3AS 30 42 17 0,3 16 22,6 6500 0,063
RNA6905R 30 42 30 0,3 41,5 63 8500 13000 0,112
NK30/20R 30 40 20 0,3 22,1 34 8500 13000 0,065
NK30/20R/LP03 30 40 20 0,3 22,1 34 1000 0,065
NK30/30R 30 40 30 0,3 33 57 8500 0,098
8Q-NK30X44X30 30 44 30 0,3 48 65,5 8500 13000 0,132
HL-8Q-NK30X46X30-2 30 46 30 0,3 53 66,5 8500 13000 0,152
8E-NK30X47X21 30 47 21 1 34,5 38,5 8500 13000 0,119
NK30X55X21-3T2 30 55 21 0,6 43 43,5 8500 13000 0,201
NKS30 30 45 22 0,6 23,3 33 8500 13000 0,104
MR202816 31,75 44,45 25,4 1 35 51 8500 13000 0,109
MR202820 31,75 44,45 31,75 1 43,5 68 8500 13000 0,136
RNA69/28R 32 45 30 0,3 43 67 8500 13000 0,135
8E-NK32X52X15-3 32 52 15 0,6 22,7 21,6 8500 13000 0,112
NK32/30R 32 42 30 0,3 34 60,5 8500 13000 0,102
NK32/20R 32 42 20 0,3 23,5 37,5 8500 13000 0,068
NKS32 32 47 22 0,6 24 35 8500 13000 0,11
RNA49/28RCT 32 45 17 0,3 24,8 33,5 8500 13000 0,073
8E-NK1-25X52.2X15-4PX1 32,5 52,2 15 1 25,2 26,2 8500 13000 0,155
8E-NK1-25X52.2X15.5PX1 32,5 52,2 15,5 1 25,2 26,2 8500 13000 0,156
8E-NK1-25X56.4X19-3 33 56,4 19 1 35,5 35,5 8500 13000 0,234
8E-NK33X60X20-9 33 60 20 0,6 44,5 40,5 8000 12000 0,216
HL-8E-NK1-25X60X20-2 33 60 20 0,6 44,5 40,5 8000 12000 0,271
8Q-NK34X50X35-7PX1 34 50 35 0,3 61,5 83 8000 12000 0,195
HL-8Q-NK34X52X33-1 34 52 33 0,6 66 83 8000 12000 0,313
8E-NK34X59X20-1PX1 34 59 20 1 42 46,5 8000 12000 0,224
MR223020 34,925 47,625 31,75 1 46,5 76,5 7500 11000 0,15
…/…

With You 48
Needle roller bearings with solid rings, without inner ring
Part numbers Dimensions (mm) Basic load rating (kN) Limiting speeds (tr/mn) Mass (kg)
Fw D C rs min dynamic static grease oil
Cr Cor (tr/min) (tr/min)
NK35/20R 35 45 20 0,3 24,8 41,5 7500 11000 0,074
NK35X42X30-5 35 42 30 0,3 27,8 60 7500 11000 0,073
NKS35 35 50 22 0,6 24,7 37 7500 11000 0,118
8Q-NK35X54X36 35 54 36 0,6 75,5 95,5 7500 11000 0,25
8Q-NK35X52X36 35 52 36 0,6 64,5 89 7500 11000 0,228
RNA4906S 35 47 17 0,3 14,9 21,6 7500 11000 0,066
NK35/30R 35 45 30 0,3 36 66,5 7500 11000 0,112
RNA4906R 35 47 17 0,3 25,5 35,5 7500 11000 0,069
RNA6906R 35 47 30 0,3 42,5 67,5 7500 11000 0,126
RNA4906LL/3AS 35 47 17 0,3 18 27,4 5500 0,072
NK35/20RCT 35 45 20 0,3 24,8 41,5 7500 11000 0,074
RNA4906L/3AS 35 47 17 0,3 18 27,4 5500 0,072
HL-8Q-NK36X55X28 36 55 28 1 61 76 7500 11000 0,21
HL-8Q-NK37X56X36-2 37 56 36 0,3 75,5 101 7500 11000 0,272
NK37/20R 37 47 20 0,3 25,3 43,5 7500 11000 0,077
NK37/30R 37 47 30 0,3 36,5 69,5 7500 11000 0,107
NKS37 37 52 22 0,6 26,3 41 7500 11000 0,123
NK1-25X58X20-5NR 38 58 20 1 33 43,5 7500 11000 0,289
NK38/20R 38 48 20 0,3 25,9 45 7500 11000 0,079
NK38/30R 38 48 30 0,3 37,5 73 7500 11000 0,107
HL-4A-8E-NK38X52X31 38 52 31 0,3 55,5 84,5 7500 11000 0,182
8Q-NK38X55X30 38 55 30 0,6 61 84,5 7500 11000 0,203
MR243320 38,1 52,388 31,75 1,5 51 81,5 7500 11000 0,18
MR243316 38,1 52,388 25,4 1,5 41 61 7500 11000 0,143
8E-NK39X58X16-2PX1 39 58 16 1,5 33,5 39 6500 10000 0,125
8E-NK39X65X18-3 39 65 18 1,5 43 45,5 6500 10000 0,228
RNA69/32R 40 52 36 0,6 47,5 82 6500 10000 0,162
RNA49/32R 40 52 20 0,6 31,5 47,5 6500 10000 0,089
RNA69/32 40 52 36 0,6 42 85,5 6500 10000 0,2
8Q-NK40X55X30 40 55 30 1 49 79 6500 10000 0,194
NK40/20R 40 50 20 0,3 26,4 47 6500 10000 0,083
NK40/30R 40 50 30 0,3 38,5 76 6500 10000 0,125
NKS40 40 55 22 0,6 27,7 45 6500 10000 0,129
MR263520 41,275 55,562 31,75 1,5 54,5 90,5 6500 9500 0,191
MR263516 41,275 55,562 25,4 1,5 43,5 68 6500 9500 0,153
RNA6907R 42 55 36 0,6 49 86,5 6500 9500 0,193
RNA4907R 42 55 20 0,6 32 50 6500 9500 0,107
RNA4907LL/3AS 42 55 20 0,6 22,7 39,5 4800 0,113
NK42/20R 42 52 20 0,3 26,9 49 6500 9500 0,086
NK42/30R 42 52 30 0,3 39 79 6500 9500 0,13
RNA4907L/3AS 42 55 20 0,6 22,7 39,5 4800 0,113
NK43/20R 43 53 20 0,3 27,5 51 6500 9500 0,086
NK43/30R 43 53 30 0,3 40 82 6500 9500 0,133
NKS43 43 58 22 0,6 29,1 49 6500 9500 0,14
MR283720 44,45 58,738 31,75 1,5 55,5 95,5 6000 9000 0,204
NK45/30R 45 55 30 0,3 41 85,5 6000 9000 0,139
NK45/20R 45 55 20 0,3 28 52,5 6000 9000 0,092
NK45/30RCT 45 55 30 0,3 41 85,5 6000 9000 0,139
NK47/30R 47 57 30 0,3 42,5 91,5 5500 8500 0,142
NK47/20RCT 47 57 20 0,3 28,8 55,5 5500 8500 0,095
MR303920 47,625 61,912 31,75 1,5 59 105 5500 8500 0,216
RNA4908R 48 62 22 0,6 43,5 66,5 5500 8500 0,14
RNA4908LL/3AS 48 62 22 0,6 27,8 53,5 4200 0,154
RNA6908R 48 62 40 0,6 67 116 5500 8500 0,256
RNA4908L/3AS 48 62 22 0,6 27,8 53,5 4200 0,154
NK50/35R 50 62 35 0,6 51 106 5500 8000 0,221
NKS50 50 65 22 1 31,5 57 5500 8000 0,157
NK50/25RCT 50 62 25 0,6 38,5 74,5 5500 8000 0,158
MR324120 50,8 65,088 31,75 1,5 62 114 5500 8000 0,227
RNA4909R 52 68 22 0,6 46 73 5000 7500 0,182
RNA6909R 52 68 40 0,6 70,5 127 5000 7500 0,273
RNA4909LL 52 68 22 0,6 28,6 57 5000 7500 0,213
RNA4909S 52 68 22 0,6 23,1 43,5 5000 7500 0,17
RNA4909LL/3AS 52 68 22 0,6 28,6 57 3800 0,157
NKS55 55 72 22 1 33,5 63 5000 7500 0,221
NK55/25R 55 68 25 0,6 41 82 5000 7500 0,193
NK55/35R 55 68 35 0,6 54 118 5000 7500 0,26
MR364828 57,15 76,2 44,45 1,5 97 173 4700 7000 0,493
MR364824 57,15 76,2 38,1 1,5 83,5 142 4700 7000 0,422
RNA4910S 58 72 22 0,6 35,5 78 4700 7000 0,173
RNA4910LL/3AS 58 72 22 0,6 30,5 64 3400 0,16
RNA4910R 58 72 22 0,6 48 80 4700 7000 0,163
RNA6910R 58 72 40 0,6 74 139 4700 7000 0,32
NK60/25R 60 72 25 0,6 41 85 4300 6500 0,185
NKS60 60 80 28 1,1 44,5 85 4300 6500 0,335
NK60/35R 60 72 35 0,6 57 130 4300 6500 0,258
RNA4911S 63 80 25 1 33 65,5 4300 6500 0,244
RNA6911R 63 80 45 1 94 183 4300 6500 0,47
RNA4911R 63 80 25 1 58,5 99,5 4300 6500 0,255
MR405228 63,5 82,55 44,45 2 102 191 4300 6500 0,533
NKS65 65 85 28 1,1 47 94 4000 6000 0,356
NK65/25R 65 78 25 0,6 45 98 4000 6000 0,221
…/…

49 With You
 C C C C C
rs rs    rs rs rs rs rs

øD øF W øD øF W øD øF W øD øFw øD øF W

NK (ØFw 12 mm) RNA49 (ØFw 12 mm) RNA49 -- R (ØFw 14 mm) NKS (ØFw 43 mm) RNA69 (ØFw 40 mm) RNA49 -- L RNA49 -- LL
NKS (ØFw 40 mm) RNA59 (avec single
(with étanchéité
seal) (avec
(with étanchéité
double seal)
RNA69 -- R d’un côté) des deux côtés)
NK -- R (ØFw 14 mm)

Needle roller bearings with solid rings, without inner ring

Part numbers Dimensions (mm) Basic load rating (kN) Limiting speeds (tr/mn) Mass (kg)
Fw D C rs min dynamic static grease oil
Cr Cor (tr/min) (tr/min)
NK65/35R 65 78 35 0,6 60 142 4000 6000 0,31
NK68/25R 68 82 25 1 44,5 89 4000 6000 0,241
NK68/35R 68 82 35 0,6 63 139 4000 6000 0,338
RNA6912R 68 85 45 1 95,5 191 4000 6000 0,488
RNA4912S 68 85 25 1,4 49,5 112 4000 6000 0,26
RNA4912R 68 85 25 1 61,5 108 4000 6000 0,275
MR445628 69,85 88,9 44,45 2 107 209 3700 5500 0,58
NK70/25R 70 85 25 0,6 45 91,5 3700 5500 0,275
NKS70R 70 90 28 1,1 49,5 103 3700 5500 0,38
NK70/35R 70 85 35 0,6 64 144 3700 5500 0,386
RNA6913R 72 90 45 1 97 198 3700 5500 0,52
RNA4913R 72 90 25 1 62,5 112 3700 5500 0,312
NK73/25R 73 90 25 0,6 54 100 3700 5500 0,302
NK73/35R 73 90 35 0,6 76,5 156 3700 5500 0,428
MR486028 76,2 95,25 44,45 2 112 227 3300 5000 0,651
NK75/35R 75 92 35 0,6 78 162 3700 5500 0,492
NK75/25R 75 92 25 0,6 55 104 3700 5500 0,315
MR486024 76,2 95,25 38,1 2 96 188 3300 5000 0,558
RNA6914R 80 100 54 1 130 267 3300 5000 0,857
NK80/35R 80 95 35 1 79,5 184 3300 5000 0,425
NK80/25R 80 95 25 1 57 119 3300 5000 0,301
RNA4914R 80 100 30 1 85,5 156 3300 5000 0,46
NK85/35R 85 105 35 1 100 193 3100 4700 0,517
RNA6915R 85 105 54 1 132 277 3100 4700 0,935
RNA4915R 85 105 30 1 87 162 3100 4700 0,489
NK85/25R 85 105 25 1 70,5 123 3100 4700 0,404
MR567232 88,9 114,3 50,8 2 154 295 3000 4500 1,27
RNA6916R 90 110 54 1 137 298 2900 4400 0,987
RNA4916R 90 110 30 1 90,5 174 2900 4400 0,516
NK90/25R 90 110 25 1 71,5 128 2900 4400 0,426
NK90/35R 90 110 35 1 104 208 2900 4400 0,604
NK95/36R 95 115 36 1 108 223 2800 4200 0,652
NK95/26R 95 115 26 1 74,5 137 2800 4200 0,364
MR607632 95,25 120,65 50,8 2,5 162 320 2800 4200 1,28
RNA6917R 100 120 63 1,1 169 400 2700 4000 1,2
NK100/26R 100 120 26 1 73,5 137 2700 4000 0,487
NK100/36R 100 120 36 1 107 223 2700 4000 0,679
RNA4917R 100 120 35 1,1 112 237 2700 4000 0,657
RNA4918R 105 125 35 1,1 116 252 2500 3800 0,697
NK105/36R 105 125 36 1 111 238 2500 3800 0,713
RNA6918R 105 125 63 1,1 175 425 2500 3800 1,33
NK105/26R 105 125 26 1 76,5 147 2500 3800 0,506
RNA4919R 110 130 35 1,1 118 260 2400 3600 0,719
RNA6919R 110 130 63 1,1 177 440 2400 3600 1,46
NK110/30R 110 130 30 1,1 97,5 204 2400 3600 0,612
NK110/40R 110 130 40 1,1 129 292 2400 3600 0,83
RNA4920 115 140 40 1,1 127 260 2300 3500 1,15
NKS115 115 135 32 1,1 90,5 199 2300 3500 0,7
NK120/40 120 140 40 1,1 113 268 2200 3300 0,91
RNA4822 120 140 30 1 93,5 210 2200 3300 0,67
RNA4922 125 150 40 1,1 131 279 2100 3200 1,24
NK130/40 130 150 40 1,1 116 283 2100 3100 0,98
RNA4824 130 150 30 1 99,5 233 2100 3100 0,73
NKS135 135 160 40 2 135 298 2000 3000 1,32
RNA4924 135 165 45 1,1 180 380 2000 3000 1,86
NK145/42 145 170 42 1,5 153 360 1900 2800 1,49
NK145/32 145 170 32 1,5 111 238 1900 2800 1,12
RNA4826 145 165 35 1,1 118 305 1900 2800 0,95
RNA4926 150 180 50 1,5 202 455 1800 2700 2,21
NK155/32 155 180 32 1,5 114 252 1700 2600 1,2
RNA4828 155 175 35 1,1 121 315 1700 2600 1,02
…/…

With You 50
Needle roller bearings with solid rings, without inner ring
Part numbers Dimensions (mm) Basic load rating (kN) Limiting speeds (tr/mn) Mass (kg)
Fw D C rs min dynamic static grease oil
Cr Cor (tr/min) (tr/min)
RNA4928 160 190 50 1,5 209 485 1700 2500 2,35
RNA4830 165 190 40 1,1 152 390 1600 2400 1,6
RNA4930 170 210 60 2 261 610 1500 2400 2,98
RNA4832 175 200 40 1,1 160 425 1500 2300 1,7
RNA4932 180 220 60 2 270 650 1500 2200 3,1
RNA4834 185 215 45 1,1 185 495 1500 2200 2,54
RNA4934 190 230 60 2 279 690 1400 2100 3,22
RNA4836 195 225 45 1,1 195 540 1400 2100 2,68
RNA4936 205 250 69 2 375 890 1300 2000 4,48
RNA4838 210 240 50 1,5 227 680 1300 1900 3,21
RNA4938 215 260 69 2 390 945 1300 1900 4,53
RNA4840 220 250 50 1,5 231 705 1200 1800 3,35
RNA4940 225 280 80 2,1 505 1180 1200 1800 7,2
RNA4844 240 270 50 1,5 244 780 1100 1700 3,62
RNA4944 245 300 80 2,1 525 1270 1100 1600 7,81
RNA4848 265 300 60 2 360 1080 1000 1500 5,4
RNA4948 265 320 80 2,1 540 1350 1000 1500 8,4
RNA4852 285 320 60 2 375 1160 950 1400 5,8
RNA4952 290 360 100 2,1 805 1900 950 1400 15,9
RNA4856 305 350 69 2 455 1300 850 1300 9,3
RNA4864 350 400 80 2,1 640 1850 750 1100 13,4
RNA4868 370 420 80 2,1 655 1940 750 1100 14

51 With You
 B
C C C
rs rrs rs

rs rs
rs

øD ød øF øD ød øF øD ød øF

NK + IR (Ød 9 mm) NA49 -- R NA49 -- LL

NA59 (avecdouble
(with étanchéité
seal)
NA69 -- R (Ød 30 mm) des deux côtés)
NK -- R + IR

Needle roller bearings with solid rings, with inner ring

Part numbers Dimensions (mm) Basic load rating (kN) Limiting speeds (tr/min) Mass (kg)

d F D C B rs min dynamic static grease oil

(width
inner ring) Cr Cor
NK8/12T2+1R5X8X12 5 8 15 12 12 0,3 4 4,1 21000 32000 0,012
NK8/16+1R5X8X16 5 8 15 16 16 0,3 4,85 5,2 21000 32000 0,017
NK9/12T2+1R6X9X12 6 9 16 12 12 0,3 4,55 5 20000 30000 0,013
NK9/16T2+1R6X9X16 6 9 16 16 16 0,3 5,5 6,4 20000 30000 0,017
8E-NK10/16CT+1R7X10X16 7 10 17 16 16 0,3 5,45 6,45 19000 28000 0,018
NK10/12T2+1R7X10X12 7 10 17 12 12 0,3 4,55 5,1 19000 28000 0,014
NK12/12+1R9X12X12 9 12 19 12 12 0,3 5 6,1 17000 26000 0,018
NK12/16+1R9X12X16 9 12 19 16 16 0,3 6 7,7 17000 26000 0,022
NA4900R 10 14 22 13 13 0,3 8,6 9,2 16000 24000 0,024
NK14/16R+1R10X14X16 10 14 22 16 16 0,3 10,3 11,5 16000 24000 0,03
NK14/20R+1R10X14X20 10 14 22 20 20 0,3 13 15,6 16000 24000 0,038
NA4900LL/3AS 10 14 22 13 14 0,3 7,2 8,5 10000 0,025
NA4901R 12 16 24 13 13 0,3 9,55 10,9 15000 23000 0,026
NA4901LL/3AS 12 16 24 13 14 0,3 7,75 9,7 10000 0,028
NA6901R 12 16 24 22 22 0,3 15,4 20 15000 23000 0,046
NK16/20R+1R12X16X20 12 16 24 20 20 0,3 14,6 18,8 15000 23000 0,042
NK16/16R+1R12X16X16 12 16 24 16 16 0,3 12,2 14,9 15000 23000 0,033
NK19/16R+1R15X19X16 15 19 27 16 16 0,3 13,3 17,4 14000 21000 0,039
NK19/20R+1R15X19X20 15 19 27 20 20 0,3 16 22,2 14000 21000 0,045
NA4902R 15 20 28 13 13 0,3 10,3 12,8 13000 20000 0,036
NA4902LL/3AS 15 20 28 13 14 0,3 8,3 11,2 10000 0,036
NA6902R 15 20 28 23 23 0,3 17,6 25,3 13000 20000 0,064
NK21/16R+1R17X21X16 17 21 29 16 16 0,3 13,7 18,7 13000 19000 0,042
NK21/20R+1R17X21X20 17 21 29 20 20 0,3 17,4 25,4 13000 19000 0,053
NA4903R 17 22 30 13 13 0,3 11,2 14,6 12000 18000 0,037
NA4903LL/3AS 17 22 30 13 14 0,3 8,5 11,9 9000 0,039
NA5903 17 22 30 18 18 0,3 15,2 21,7 12000 18000 0,056
NA6903R 17 22 30 23 23 0,3 18,2 27,2 12000 18000 0,069
NK24/16R+1R20X24X16 20 24 32 16 16 0,3 15,2 22,3 11000 17000 0,049
NK24/20R+1R20X24X20 20 24 32 20 20 0,3 18,6 28,8 11000 17000 0,061
NA4904LL/3AS 20 25 37 17 18 0,3 15,2 19,9 8000 0,08
NA4904RCT 20 25 37 17 17 0,3 21,3 25,5 11000 16000 0,074
NA6904R 20 25 37 30 30 0,3 36,5 50,5 11000 16000 0,141
NK26/16R+1R22X26X16 22 26 34 16 16 0,3 15,6 23,6 10000 15000 0,046
NK26/20R+1R22X26X20 22 26 34 20 20 0,3 19,1 30,5 10000 15000 0,064
NA49/22R 22 28 39 17 17 0,3 23,2 29,3 9500 14000 0,08
NA59/22 22 28 39 23 23 0,3 26,4 37,5 9500 14000 0,134
NA69/22R 22 28 39 30 30 0,3 40 58,5 9500 14000 0,154
NK29/20R+1R25X29X20 25 29 38 20 20 0,3 22,2 34 9500 14000 0,079
NK29/30R+1R25X29X30 25 29 38 30 30 0,3 27,5 50,5 9500 14000 0,123
NA4905R 25 30 42 17 17 0,3 24 31,5 8500 13000 0,088
NA4905LL/3AS 25 30 42 17 18 0,3 16 22,6 6500 0,093
NA5905 25 30 42 23 23 0,3 30,5 43 8500 13000 0,139
NA6905R 25 30 42 30 30 0,3 41,5 63 8500 13000 0,162
NA69/28R 28 32 45 30 30 0,3 43 67 8500 13000 0,179
NA49/28R 28 32 45 17 17 0,3 24,8 33,5 8500 13000 0,098
NK32/20R+1R28X32X20 28 32 42 20 20 0,3 23,5 37,5 8500 13000 0,096
NK32/30R+1R28X32X30 28 32 42 30 30 0,3 34 60,5 8500 13000 0,146
NA4906R 30 35 47 17 17 0,3 25,5 35,5 7500 11000 0,101
NA4906LL/3AS 30 35 47 17 18 0,3 18 27,4 5500 0,107
NA5906 30 35 47 23 23 0,3 32,5 48,5 7500 11000 0,152
NA6906R 30 35 47 30 30 0,3 42,5 67,5 7500 11000 0,185
NK35/20RCT+1R30X35X20 30 35 45 20 20 0,3 24,8 41,5 7500 11000 0,112
NK35/30R+1R30X35X30 30 35 45 30 30 0,3 36 66,5 7500 11000 0,171
NK37/20R+1R32X37X20 32 37 47 20 20 0,3 25,3 43,5 7500 11000 0,117
NK37/30R+1R32X37X30 32 37 47 30 30 0,3 36,5 69,5 7500 11000 0,17
NA49/32R 32 40 52 20 20 0,6 31,5 47,5 6500 10000 0,157
NA69/32R 32 40 52 36 36 0,6 47,5 82 6500 10000 0,286
NK40/20R+1R35X40X20 35 40 50 20 20 0,3 26,4 47 6500 10000 0,13

…/…

With You 52
Needle roller bearings with solid rings, with inner ring
Part numbers Dimensions (mm) Basic load rating (kN) Limiting speeds (tr/min) Mass (kg)

d F D C B rs min dynamic static grease oil

(width
inner ring) Cr Cor
NK40/30R+1R35X40X30 35 40 50 30 30 0,3 38,5 76 6500 10000 0,193
NA4907R 35 42 55 20 20 0,6 32 50 6500 9500 0,171
NA4907LL/3AS 35 42 55 20 21 0,6 22,7 39,5 4800 0,175
NA6907R 35 42 55 36 36 0,6 49 86,5 6500 9500 0,31
NK43/20R+1R38X43X20 38 43 53 20 20 0,3 27,5 51 6500 9500 0,134
NK43/30R+1R38X43X30 38 43 53 30 30 0,3 40 82 6500 9500 0,207
NK45/20R+1R40X45X20 40 45 55 20 20 0,3 28 52,5 6000 9000 0,143
NK45/30RCT+1R40X45X30 40 45 55 30 30 0,3 41 85,5 6000 9000 0,216
NA4908R 40 48 62 22 22 0,6 43,5 66,5 5500 8500 0,232
NA4908LL/3AS 40 48 62 22 23 0,6 27,8 53,5 4200 0,252
NA5908 40 48 62 30 30 0,6 53 92,5 5500 8500 0,348
NA6908R 40 48 62 40 40 0,6 67 116 5500 8500 0,426
NK47/20RCT+1R42X47X20 42 47 57 20 20 0,3 28,8 55,5 5500 8500 0,148
NK47/30R+1R42X47X30 42 47 57 30 30 0,3 42,5 91,5 5500 8500 0,222
NK50/25RCT+1R45X50X25 45 50 62 25 25 0,6 38,5 74,5 5500 8000 0,229
NK50/35R+1R45X50X35 45 50 62 35 35 0,6 51 106 5500 8000 0,322
NA4909R 45 52 68 22 22 0,6 46 73 5000 7500 0,27
NA4909LL/3AS 45 52 68 22 23 0,6 28,6 57 3800 0,29
NA5909 45 52 68 30 30 0,6 56 101 5000 7500 0,396
NA6909R 45 52 68 40 40 0,6 70,5 127 5000 7500 0,437
NK55/25R+1R50X55X25 50 55 68 25 25 0,6 41 82 5000 7500 0,271
NK55/35R+1R50X55X35 50 55 68 35 35 0,6 54 118 5000 7500 0,379
NA4910R 50 58 72 22 22 0,6 48 80 4700 7000 0,276
NA4910LL/3AS 50 58 72 22 23 0,6 30,5 64 3400 0,295
NA5910 50 58 72 30 30 0,6 58 110 4700 7000 0,498
NA6910R 50 58 72 40 40 0,6 74 139 4700 7000 0,529
NK60/25R+1R55X60X25 55 60 72 25 25 0,6 41 85 4300 6500 0,271
NK60/35R+1R55X60X35 55 60 72 35 35 0,6 57 130 4300 6500 0,379
NA4911R 55 63 80 25 25 1 58,5 99,5 4300 6500 0,396
NA5911 55 63 80 34 34 1 76,5 140 4300 6500 0,559
NA6911R 55 63 80 45 45 1 94 183 4300 6500 0,726
NA4912R 60 68 85 25 25 1 61,5 108 4000 6000 0,427
NA5912 60 68 85 34 34 1 80,5 153 4000 6000 0,614
NA6912R 60 68 85 45 45 1 95,5 191 4000 6000 0,758
NK68/25R+1R60X68X25 60 68 82 25 25 1 44,5 89 4000 6000 0,393
NK68/35R+1R60X68X35 60 68 82 35 35 0,6 63 139 4000 6000 0,551
NA4913R 65 72 90 25 25 1 62,5 112 3700 5500 0,454
NA5913 65 72 90 34 34 1 84 165 3700 5500 0,655
NA6913R 65 72 90 45 45 1 97 198 3700 5500 0,779
NK73/25R+1R65X73X25 65 73 90 25 25 0,6 54 100 3700 5500 0,466
NK73/35R+1R65X73X35 65 73 90 35 35 0,6 76,5 156 3700 5500 0,66
NA4914R 70 80 100 30 30 1 85,5 156 3300 5000 0,727
NA5914 70 80 100 40 40 1 103 187 3300 5000 1,06
NA6914R 70 80 100 54 54 1 130 267 3300 5000 1,34
NK80/25R+1R70X80X25 70 80 95 25 25 1 57 119 3300 5000 0,525
NK80/35R+1R70X80X35 70 80 95 35 35 1 79,5 184 3300 5000 0,738
NA4915R 75 85 105 30 30 1 87 162 3100 4700 0,776
NA6915R 75 85 105 54 54 1 132 277 3100 4700 1,45
NK85/25R+1R75X85X25 75 85 105 25 25 1 70,5 123 3100 4700 0,642
NK85/35R+1R75X85X35 75 85 105 35 35 1 100 193 3100 4700 0,853
NA4916R 80 90 110 30 30 1 90,5 174 2900 4400 0,82
NA5916 80 90 110 40 40 1 115 223 2900 4400 1,15
NA6916R 80 90 110 54 54 1 137 298 2900 4400 1,53
NK90/25R+1R80X90X25 80 90 110 25 25 1 71,5 128 2900 4400 0,68
NK90/35R+1R80X90X35 80 90 110 35 35 1 104 208 2900 4400 0,959
NK95/26R+1R85X95X26 85 95 115 26 26 1 74,5 137 2800 4200 0,644
NK95/36R+1R85X95X36 85 95 115 36 36 1 108 223 2800 4200 1,05
NA4917R 85 100 120 35 35 1,1 112 237 2700 4000 1,24
NA5917 85 100 120 46 46 1,1 137 290 2700 4000 1,76
NA6917R 85 100 120 63 63 1,1 169 400 2700 4000 2,25
NK100/26R+1R90X100X26 90 100 120 26 26 1 73,5 137 2700 4000 0,781
NK100/36R+1R90X100X36 90 100 120 36 36 1 107 223 2700 4000 1,09
NA4918R 90 105 125 35 35 1,1 116 252 2500 3800 1,84
NA6918R 90 105 125 63 63 1,1 175 425 2500 3800 2,37
NK105/26R+1R95X105X26 95 105 125 26 26 1 76,5 147 2500 3800 0,819
NK105/36R+1R95X105X36 95 105 125 36 36 1 111 238 2500 3800 1,15
NA4919R 95 110 130 35 35 1,1 118 260 2400 3600 1,36
NA6919R 95 110 130 63 63 1,1 177 440 2400 3600 2,63
NK110/30R+1R100X110X30 100 110 130 30 30 1,1 97,5 204 2400 3600 0,99
NK110/40R+1R100X110X40 100 110 130 40 40 1,1 129 292 2400 3600 1,34
NA4920 100 115 140 40 40 1,1 127 260 2300 3500 1,93
NA4822 110 120 140 30 30 1 93,5 210 2200 3300 1,11
NA4922 110 125 150 40 40 1,1 131 279 2100 3200 2,08
NA4824 120 130 150 30 30 1 99,5 233 2100 3100 1,17
NA4924 120 135 165 45 45 1,1 180 380 2000 3000 2,84
NA4924C3 120 135 165 45 45 1,1 180 380 2000 3000 2,84
NA4826 130 145 165 35 35 1,1 118 305 1900 2800 1,6
NA4926 130 150 180 50 50 1,5 202 455 1800 2700 3,9
NA4828 140 155 175 35 35 1,1 121 315 1700 2600 1,82
NA4928 140 160 190 50 50 1,5 209 485 1700 2500 4,05

…/…

53 With You
 B
C C C
rs rrs rs

rs rs
rs

øD ød øF øD ød øF øD ød øF

NK + IR (Ød 9 mm) NA49 -- R NA49 -- LL

NA59 (avecdouble
(with étanchéité
seal)
NA69 -- R (Ød 30 mm) des deux côtés)
NK -- R + IR

Needle roller bearings with solid rings, with inner ring

Part numbers Dimensions (mm) Basic load rating (kN) Limiting speeds (tr/min) Mass (kg)

d F D C B rs min dynamic static grease oil

(width
inner ring) Cr Cor
NA4830 150 165 190 40 40 1,1 152 390 1600 2400 2,72
NA4832 160 175 200 40 40 1,1 160 425 1500 2300 2,9
NA4834 170 185 215 45 45 1,1 185 495 1500 2200 3,99
NA4836 180 195 225 45 45 1,1 195 540 1400 2100 4,19
NA4838 190 210 240 50 50 1,5 227 680 1300 1900 5,62
NA4840 200 220 250 50 50 1,5 231 705 1200 1800 5,84
NA4844 220 240 270 50 50 1,5 244 780 1100 1700 6,37
NA4848 240 265 300 60 60 2 360 1080 1000 1500 10
NA4852 260 285 320 60 60 2 375 1160 950 1400 10,8
NA4856 280 305 350 69 69 2 455 1300 850 1300 15,5
NA4860 300 330 380 80 80 2,1 625 1770 800 1200 22
NA4864 320 350 400 80 80 2,1 640 1850 750 1100 23,2
NA4872 360 390 440 80 80 2,1 665 2020 650 1000 25,7
NA4876 380 415 480 100 100 2,1 1000 2840 650 950 44,5

With You 54
 rs rs

RNAO RNAO -- ZW

Needle roller bearings with separable solid rings, without inner ring
Part numbers Dimensions (mm) Basic load rating (kN) Limiting speeds (tr/min) Mass (kg)
Fw E D C rs min dynamic (N) static (N) grease oil
Cr Cor
RNA0-5X10X8T2 5 8 10 8 0,15 2,64 2,19 27000 40000 0,003
RNA0-6X12X7XT2/2AS 6 9 12 7 0,3 2,27 1,86 25000 0 0,003
RNA0-6X13X8T2 6 9 13 8 0,3 2,66 2,28 25000 37000 0,006
RNA0-7X14X8T2 7 10 14 8 0,3 2,67 2,35 23000 34000 0,006
RNA0-8X15X10T2 8 11 15 10 0,3 4 4,1 21000 32000 0,008
RNA0-10X17X10T2 10 13 17 10 0,3 4,55 5,1 19000 28000 0,01
RNA0-10X22X10X 10 14 22 10 0,5 5,5 5,45 19000 28000 0,021
RNA0-12X22X12 12 18 22 12 0,3 8,65 8 17000 26000 0,019
RNA0-15X23X13 15 19 23 13 0,3 8,25 10,2 15000 23000 0,02
RNA0-16X24X13 16 20 24 13 0,3 9,05 11,8 15000 23000 0,021
RNA0-16X28X12 16 22 28 12 0,3 11,7 12,5 15000 23000 0,032
RNA0-17X25X13 17 21 25 13 0,3 9,4 12,6 15000 22000 0,022
RNA0-20X28X13 20 24 28 13 0,3 10 14,3 13000 20000 0,025
RNA0-20X28X26ZW 20 24 28 26 0,3 17,1 28,6 13000 20000 0,05
RNA0-20X32X12 20 26 32 12 0,3 12,9 15,1 13000 20000 0,038
RNA0-22X30X26ZW 22 26 30 26 0,3 17,5 30,5 12000 18000 0,054
RNA0-22X35X16 22 29 35 16 0,3 18,7 22,7 12000 18000 0,059
RNA0-25X35X17 25 29 35 17 0,3 14,2 24 11000 16000 0,053
RNA0-25X35X26ZW 25 29 35 26 0,3 18,4 33,5 11000 16000 0,076
RNA0-30X40X17 30 35 40 17 0,3 19,4 32,5 9000 13000 0,06
RNA0-30X42X32ZW 30 37 42 32 0,3 37,5 60,5 9000 13000 0,137
RNA0-32X42X13 32 37 42 13 0,3 14,5 23 8500 13000 0,049
RNA0-35X45X26ZW 35 40 45 26 0,3 26,1 50 7500 11000 0,091
RNA0-40X50X34ZW 40 45 50 34 0,3 37,5 83 6500 10000 0,152
RNA0-40X55X20 40 47 55 20 0,3 31 51,5 6500 10000 0,145
RNA0-40X55X40ZW 40 48 55 40 0,3 56,5 102 6500 10000 0,275
RNA0-40X50X17V1 40 45 50 17 0,3 21,8 41,5 6500 10000 0,074
RNA0-45X55X17 45 50 55 17 0,3 22,3 44,5 6000 9000 0,083
RNA0-45X62X40ZW 45 53 62 40 0,3 61,5 118 6000 9000 0,377
RNA0-50X62X20 50 55 62 20 0,3 27,9 62 5500 8000 0,14
RNA0-50X65X20 50 58 65 20 0,3 38,5 67,5 5500 8000 0,168
RNA0-50X65X40ZW 50 58 65 40 0,6 66,5 135 5500 8000 0,355
RNA0-55X68X20 55 60 68 20 0,6 28,8 66,5 4800 7500 0,166
RNA0-60X78X20 60 68 78 20 1 40 75 4400 6500 0,255
RNA0-60X78X40ZW 60 68 78 40 1 69 150 4400 6500 0,5
RNA0-65X85X30 65 73 85 30 1 61 132 4100 6000 0,464
RNA0-70X90X30 70 78 90 30 1 65,5 149 3800 5500 0,499
RNA0-70X90X60ZW 70 78 90 60 1 112 297 3800 5500 1,02
RNA0-80X100X30 80 88 100 30 1 69 166 3300 5000 0,58
RNA0-100X120X30 100 108 120 30 1 76 201 2700 4000 0,694

55 With You
 rs

rs rs

NAO NAO -- ZW

Needle roller bearings with separable solid rings, with inner ring
Part numbers Dimensions (mm) Basic load rating (kN) Limiting speeds (tr/min) Mass (kg)
d F E D C rs min dynamic (N) static (N) grease oil
Cr Cor
NA0-17X35X16 22 17 29 35 16 0,3 18,7 22,7 12000 18000 0,078
NA0-20X35X17 25 20 29 35 17 0,3 14,2 24 11000 16000 0,076
NA0-25X40X17 30 25 35 40 17 0,3 19,4 32,5 9000 13000 0,088
NA0-25X42X16 30 25 37 42 16 0,3 21,9 30,5 9000 13000 0,086
NA0-30X45X17 30 35 40 45 13 0,3 15,2 25,1 7500 11000 0,077
NA0-30X45X26ZW 35 30 40 45 26 0,3 26,1 50 7500 11000 0,157
NA0-35X50X17 40 35 45 50 17 0,3 21,8 41,5 6500 10000 0,113
NA0-35X55X20 40 35 47 55 20 0,3 31 51,5 6500 1000 0,19
NA0-40X55X17 40 45 50 55 17 0,3 22,3 44,5 6000 9000 0,127
NA0-40X62X20 40 45 53 65 20 0,3 36 59 6000 9000 0,23
NA0-50X68X20 55 50 60 68 20 0,6 28,8 66,5 4800 7500 0,23

With You 56
 rs

1R - M1

Inner rings
Part numbers Dimensions (mm) Mass (kg)
d F B t rs min
1R5X7X10 5 7 10 1 0,15 0,0014
1R5X8X12 5 8 12 1 0,3 0,0028
1R5X8X16 5 8 16 - 0,3 0,0038
1R6X8X10 6 8 10 1 0,15 0,0017
1R6X10X10D 6 10 10 1 0,3 0,0037
1R6X10X10 6 10 10 1 0,3 0,0037
1R6X10X12D 6 10 12 - 0,3 0,0046
1R6X10X13 6 10 13 1 0,3 0,005
1R6X9X12 6 9 12 1 0,3 0,0032
1R6X9X16 6 9 16 1 0,3 0,0043
1R7X10X10.5 7 10 10,5 1 0,3 0,0031
1R7X10X12 7 10 12 1 0,3 0,0036
1R7X10X16 7 10 16 1 0,3 0,0049
1R7X12X16 7 12 16 1 0,3 0,0093
1R7X9X10 7 9 10 1 0,15 0,0019
1R8X12X10 8 12 10 1 0,3 0,0048
1R8X12X10D 8 12 10 1 0,3 0,0048
1R8X12X10.5 8 12 10,5 1 0,3 0,005
1R8X12X12D 8 12 12 - 0,3 0,0057
1R8X12X12.5 8 12 12,5 1 0,3 0,0059
1R8X14X16 8 14 16 1 0,3 0,013
1R9X12X11 9 12 11 1 0,3 0,0041
1R9X12X12 9 12 12 1 0,3 0,0045
1R9X12X16 9 12 16 1 0,3 0,0061
1R9X15X16 9 15 16 1 0,3 0,014
1R10X13X12.5 10 13 12,5 1 0,3 0,0052
1R10X14X12 10 14 12 1 0,3 0,0073
1R10X14X12D 10 14 12 - 0,3 0,0073
1R10X14X13 10 14 13 1 0,3 0,0074
1R10X14X14D 10 14 14 - 0,3 0,008
1R10X14X16 10 14 16 - 0,3 0,0092
1R10X14X20 10 14 20 1 0,3 0,012
1R10X15X15.5 10 15 15,5 1 0,3 0,012
1R10X16X16 10 16 16 1 0,3 0,015
1R12X15X12 12 15 12 1 0,3 0,0058
1R12X15X12.5 12 15 12,5 1 0,3 0,0061
1R12X15X16 12 15 16 1 0,3 0,0078
1R12X15X16.5 12 15 16,5 - 0,3 0,008
1R12X15X22.5 12 15 22,5 - 0,3 0,011
1R12X16X12 12 16 12 1,5 0,3 0,0079
1R12X16X13 12 16 13 1,5 0,3 0,0087
1R12X16X14D 12 16 14 - 0,3 0,0095
1R12X16X16 12 16 16 1,5 0,3 0,011
1R12X16X20 12 16 20 1,5 0,3 0,014
1R12X16X22 12 16 22 1,5 0,3 0,015
1R12X17X20.5 12 17 20,5 1,5 0,3 0,019
1R12X17X25.5 12 17 25,5 1,5 0,3 0,024
1R14X17X17 14 17 17 1,5 0,3 0,0095
1R15X18X12.5 15 18 12,5 1,5 0,3 0,0072
1R15X18X16 15 18 16 1,5 0,3 0,0093
1R15X18X16.5 15 18 16,5 1,5 0,3 0,0096
1R15X18X17.5 15 18 17,5 1,5 0,3 0,01
1R15X18X20.5 15 18 20,5 1,5 0,3 0,012
1R15X18X25.5 15 18 25,5 1,5 0,3 0,015
1R15X19X16 15 19 16 1,5 0,3 0,013
1R15X19X20 15 19 20 1,5 0,3 0,016
1R15X20X12 15 20 12 1,5 0,3 0,012
1R15X20X13 15 20 13 1,5 0,3 0,014
1R15X20X14D 15 20 14 - 0,3 0,015
1R15X20X18 15 20 18 1,5 0,3 0,019
1R15X20X20.5 15 20 20,5 1,5 0,3 0,021
1R15X20X23 15 20 23 - 0,3 0,024
…/…

57 With You
 rs

1R - M1

Inner rings
Part numbers Dimensions (mm) Mass (kg)
d F B t rs min
1R15X20X26 15 20 26 1,5 0,3 0,027
1R15X20X30.5 15 20 30,5 1,5 0,3 0,032
1R15X22X20 15 22 20 1,5 0,6 0,032
1R17X20X16 17 20 16 1,5 0,3 0,011
1R17X20X16.5 17 20 16,5 1,5 0,3 0,011
1R17X20X20 17 20 20 1,5 0,3 0,014
1R17X20X20.5 17 20 20,5 - 0,3 0,014
1R17X20X30.5 17 20 30,5 - 0,3 0,021
1R17X21X16 17 21 16 1,5 0,3 0,014
1R17X21X20 17 21 20 - 0,3 0,018
1R17X22X13 17 22 13 1,5 0,3 0,015
1R17X22X14D 17 22 14 - 0,3 0,016
1R17X22X16 17 22 16 - 0,3 0,019
1R17X22X18 17 22 18 1,5 0,3 0,021
1R17X22X20.5 17 22 20,5 1,5 0,3 0,024
1R17X22X23 17 22 23 - 0,3 0,027
1R17X22X26 17 22 26 1,5 0,3 0,03
1R17X22X32 17 22 32 1,5 0,3 0,036
1R17X24X20 17 24 20 1,5 0,6 0,034
1R17X22X16D 17 22 16 - 0,3 0,019
1R20X24X16 20 24 16 1,8 0,3 0,017
1R20X24X20 20 24 20 - 0,3 0,021
1R20X24X28.5 20 24 28,5 - 0,3 0,03
1R20X25X12.5 20 25 12,5 1,8 0,3 0,016
1R20X25X16 20 25 16 - 0,3 0,021
1R20X25X16.5 20 25 16,5 1,8 0,3 0,022
1R20X25X17 20 25 17 1,8 0,3 0,022
1R20X25X18D 20 25 18 - 0,3 0,024
1R20X25X20 20 25 20 - 0,3 0,027
1R20X25X20.5 20 25 20,5 1,8 0,3 0,028
1R20X25X23 20 25 23 1,8 0,3 0,031
1R20X25X26 20 25 26 1,8 0,3 0,034
1R20X25X26.5 20 25 26,5 - 0,3 0,036
1R20X25X30 20 25 30 1,8 0,3 0,041
1R20X25X32 20 25 32 1,8 0,3 0,041
1R20X25X38.5 20 25 38,5 - 0,3 0,053
1R20X28X20 20 28 20 1,8 0,6 0,045
1R22X26X16 22 26 16 1,8 0,3 0,017
1R22X26X20 22 26 20 - 0,3 0,022
1R22X28X17 22 28 17 1,8 0,3 0,03
1R22X28X20 22 28 20 1,8 0,3 0,035
1R22X28X20.5 22 28 20,5 1,8 0,3 0,036
1R22X28X23 22 28 23 1,8 0,3 0,042
1R22X28X30 22 28 30 - 0,3 0,054
1R25X29X20 25 29 20 - 0,3 0,026
1R25X29X30 25 29 30 1,8 0,3 0,039
1R25X30X12.5 25 30 12,5 1,8 0,3 0,02
1R25X30X16 25 30 16 1 0,3 0,024
1R25X30X16.5 25 30 16,5 1,8 0,3 0,026
1R25X30X17 25 30 17 1,8 0,3 0,027
1R25X30X18 25 30 18 - 0,3 0,03
1R25X30X18D 25 30 18 - 0,3 0,03
1R25X30X20 25 30 20 1,8 0,3 0,033
1R25X30X20.5 25 30 20,5 1,8 0,3 0,034
1R25X30X20.5D 25 30 20,5 1,8 0,3 0,034
1R25X30X23 25 30 23 1,8 0,3 0,038
1R25X30X26.5 25 30 26,5 - 0,3 0,043
1R25X30X30 25 30 30 1,8 0,3 0,05
1R25X30X32 25 30 32 1 0,3 0,054
1R25X30X38.5 25 30 38,5 - 0,3 0,064
1R25X32X15X1PX1 25 32 15 1,8 0 0,034
1R25X32X22 25 32 22 1,8 0,6 0,052
…/…

With You 58
Inner rings
Part numbers Dimensions (mm) Mass (kg)
d F B t rs min
M1-162016 25,4 31,75 25,65 - 1 0,052
1R28X32X17 28 32 17 1,8 0,3 0,025
1R28X32X20 28 32 20 1,8 0,3 0,028
1R28X32X30 28 32 30 - 0,3 0,044
1R29X32X13 29 32 13 1,8 0,3 0,015
1R30X35X12.5 30 35 12,5 1,8 0,3 0,024
1R30X35X13 30 35 13 1,3 0,3 0,025
1R30X35X16 30 35 16 - 0,3 0,031
1R30X35X16.5 30 35 16,5 1,8 0,3 0,032
1R30X35X17 30 35 17 1,8 0,3 0,032
1R30X35X18D 30 35 18 - 0,3 0,035
1R30X35X20 30 35 20 - 0,3 0,038
1R30X35X20.5 30 35 20,5 1,8 0,3 0,039
1R30X35X23 30 35 23 1,8 0,3 0,044
1R30X35X26 30 35 26 1,8 0,3 0,05
1R30X35X30 30 35 30 - 0,3 0,059
1R30X35X30D 30 35 30 - 0,3 0,059
1R30X35X32 30 35 32 1,8 0,3 0,063
1R30X37X18 30 37 18 1,8 0,3 0,05
1R30X37X22 30 37 22 1,8 0,6 0,061
1R30X38X20 30 38 20 - 0,6 0,065
M1-202420 31,75 38,1 32 - 1,5 0,094
1R32X37X20 32 37 20 2 0,3 0,04
1R32X37X30 32 37 30 - 0,3 0,063
1R32X38X32 32 38 32 2 0,3 0,082
1R32X40X20 32 40 20 2 0,6 0,068
1R32X40X27 32 40 27 2 0,6 0,092
1R32X40X36 32 40 36 2 0,6 0,124
1R33X37X13 33 37 13 2 0,3 0,022
M1-222820 34,925 44,45 32 2 1,5 0,146
1R35X40X12.5 35 40 12,5 2 0,3 0,027
1R35X40X16.5 35 40 16,5 2 0,3 0,037
1R35X40X17 35 40 17 2 0,3 0,038
1R35X40X20 35 40 20 2 0,3 0,044
1R35X40X20.5 35 40 20,5 2 0,3 0,046
1R35X40X30 35 40 30 - 0,3 0,068
1R35X40X30V4 35 40 30 - 0,3 0,068
1R35X40X34 35 40 34 1,8 0,3 0,079
1R35X40X40 35 40 40 2 0,3 0,091
1R35X42X20 35 42 20 1,8 0,6 0,064
1R35X42X21D 35 42 21 - 0,6 0,068
1R35X42X23D 35 42 23 - 0,6 0,074
1R35X42X27 35 42 27 2 0,6 0,08
1R35X42X36 35 42 36 2 0,6 0,117
1R35X43X22 35 43 22 2 0,6 0,081
1R38X43X20 38 43 20 1,8 0,3 0,048
1R38X43X30 38 43 30 - 0,3 0,074
M1-242816 38,1 44,45 25,65 2 1,5 0,083
1R40X45X16.5 40 45 16,5 2 0,3 0,042
1R40X45X17 40 45 17 2 0,3 0,043
1R40X45X20 40 45 20 2 0,3 0,051
1R40X45X20.5 40 45 20,5 2 0,3 0,053
1R40X45X26.5 40 45 26,5 - 0,3 0,068
1R40X45X30 40 45 30 2 0,3 0,077
1R40X45X34 40 45 34 2 0,3 0,088
1R40X45X40 40 45 40 2 0,3 0,106
1R40X48X22 40 48 22 2 0,6 0,092
1R40X48X23D 40 48 23 - 0,6 0,097
1R40X48X30 40 48 30 2 0,6 0,123
1R40X48X40 40 48 40 2 0,6 0,17
1R40X50X20 40 50 20 0,8 0,3 0,106
1R40X50X22 40 50 22 2 1 0,118
1R40X50X22P5 40 50 22 2 1 0,118
1R42X47X20 42 47 20 2 0,3 0,053
1R42X47X30 42 47 30 2 0,3 0,08
1R45X50X20 45 50 20 2 0,3 0,057
1R45X50X25 45 50 25 2 0,6 0,071
1R45X50X25.5 45 50 25,5 - 0,3 0,074
1R45X50X35 45 50 35 2 0,6 0,101
1R45X50X40 45 50 40 1,5 0,3 0,115
1R45X52X20X 45 55 20 2 0,6 0,083
1R45X52X22 45 52 22 2 0,6 0,088
1R45X52X23D 45 52 23 - 0,6 0,093
1R45X52X30 45 52 30 2 0,6 0,123
1R45X52X40 45 52 40 2 0,6 0,164
1R45X55X20 45 55 20 2 0,6 0,116
1R45X55X22 45 55 22 2 1 0,13
1R45X55X40 45 55 40 2 0,6 0,173
1R50X55X20 50 55 20 2 0,6 0,063
1R50X55X25 50 55 25 2 0,6 0,078
1R50X55X35 50 55 35 2 0,6 0,112
1R50X55X40 50 55 40 2 0,6 0,128
1R50X58X22 50 58 22 2 0,6 0,113
…/…

59 With You
 rs

1R - M1

Inner rings
Part numbers Dimensions (mm) Mass (kg)
d F B t rs min
1R50X58X23D 50 58 23 - 0,6 0,119
1R50X58X30 50 58 30 2 0,6 0,159
1R50X58X40 50 58 40 2 0,6 0,209
1R50X60X20 50 60 20 2 1 0,129
1R50X60X25 50 60 25 2 1 0,163
1R50X60X28 50 60 28 2 1,1 0,183
1R50X60X40 50 60 40 2 1 0,262
1R55X60X25 55 60 25 2,2 0,6 0,086
1R55X60X35 55 60 35 2 0,6 0,121
1R55X63X25 55 63 25 2 1 0,141
1R55X63X34 55 63 34 2,2 1 0,192
1R55X63X45 55 63 45 2,2 1 0,256
1R55X65X28 55 65 28 2,2 1,1 0,206
1R55X65X30 55 65 30 2,2 1 0,22
1R55X65X60 55 65 60 1,5 1 0,44
1R55X60X38XPX1 55 60 38 2,2 1 0,131
1R60X68X25 60 68 25 2,2 1 0,152
1R60X68X34 60 68 34 2,2 1 0,206
1R60X68X35 60 68 35 2,2 0,6 0,213
1R60X68X45 60 68 45 2,2 1 0,27
1R60X70X25 60 70 25 2,2 1 0,195
1R60X70X28 60 70 28 2,2 1,1 0,216
1R60X70X30 60 70 30 2,2 1 0,232
1R60X70X60 60 70 60 2,2 1 0,463
1R60X70X25V2 60 70 25 2,2 1 0,195
1R65X72X25 65 72 25 2,2 1 0,142
1R65X72X34 65 72 34 2,2 1 0,193
1R65X72X45 65 72 45 2,2 1 0,259
1R65X73X25 65 73 25 2,2 0,6 0,164
1R65X73X35 65 73 35 2,2 0,6 0,232
1R65X75X28 65 75 28 2,2 1,1 0,24
1R65X75X30 65 75 30 2,2 1 0,256
1R65X75X60 65 75 60 2,2 1 0,513
1R70X80X25 70 80 25 2,2 1 0,224
1R70X80X28 70 80 28 2,2 1,1 0,25
1R70X80X30 70 80 30 2,2 1 0,267
1R70X80X35 70 80 35 2,2 1 0,313
1R70X80X40 70 80 40 2,2 1 0,358
1R70X80X54 70 80 54 2,2 1 0,483
1R70X80X56 70 80 56 2,2 1 0,502
1R70X80X60 70 80 60 2,2 1 0,54
1R75X85X25 75 85 25 2,2 1 0,238
1R75X85X30 75 85 30 2,2 1 0,287
1R75X85X35 75 85 35 2,2 1 0,336
1R75X85X40 75 85 40 2,2 1 0,385
1R75X85X54 75 85 54 2,2 1 0,515
1R75X90X32 75 90 32 2,2 1,1 0,48
1R80X90X25 80 90 25 2,2 1 0,254
1R80X90X30 80 90 30 2,2 1 0,304
1R80X90X35 80 90 35 2,2 1 0,355
1R80X90X40 80 90 54 2,2 1 0,408
1R80X90X54 80 90 54 2,2 1 0,543
1R80X95X32 80 95 32 2,2 1,1 0,51
1R85X95X36 85 95 36 2,5 1 0,398
1R85X100X32 85 100 32 2,5 1,1 0,53
1R85X100X35 85 100 35 2,5 1,1 0,58
1R85X100X46 85 100 46 2,5 1,1 0,76
1R85X100X63 85 100 63 2,5 1,1 1,05
1R85X95X26 85 95 26 2,5 1 0,28

…/…

With You 60
Inner rings
Part numbers Dimensions (mm) Mass (kg)
d F B t rs min
1R90X100X26 90 100 26 2,5 1 0,294
1R90X100X30 90 100 30 2,5 1 0,34
1R90X100X36 90 100 36 2,5 1 0,406
1R90X105X32 90 105 32 2,5 1,1 0,56
1R90X105X35 90 105 35 2,5 1,1 0,61
1R90X105X46 90 105 46 2,5 1,1 0,8
1R90X105X63 90 105 63 2,5 1,1 1,11
1R95X105X26 95 105 26 2,5 1 0,313
1R95X105X36 95 105 36 2,5 1 0,43
1R95X110X32 95 110 32 2,5 1,1 0,59
1R95X110X35 95 110 35 2,5 1,1 0,64
1R95X110X46 95 110 46 2,5 1,1 0,85
1R95X110X63 95 110 63 2,5 1,1 1,17
1R100X110X30 100 110 30 2,5 1,1 0,375
1R100X110X40 100 110 40 2,5 1,1 0,505
1R100X115X32 100 115 32 2,5 1,1 0,62
1R100X115X40 100 115 40 2,5 1,1 0,775
1R100X115X54 100 115 54 2,5 1,1 1,09
1R110X120X30 110 120 30 2,5 1 0,44
1R110X120X40 110 120 40 2,5 1,1 0,58
1R110X125X40 110 125 40 2,5 1,1 0,84
1R110X125X54 110 125 54 2,5 1,1 1,16
1R120X130X30 120 130 30 2,2 1 0,44
1R120X130X40 120 130 40 2,5 1,1 0,59
1R120X135X40 120 135 40 2,5 2 0,87
1R120X135X45 120 135 45 2,5 1,1 0,98
1R120X135X60 120 135 60 2,5 1,1 1,25
1R130X145X32 130 145 32 3 1,5 0,78
1R130X145X35 130 145 35 3 1,1 0,855
1R130X145X42 130 145 42 3 1,5 1,05
1R130X150X50 130 150 50 3 1,5 1,69
1R130X150X52 130 150 52 3 2 1,75
1R130X150X67 130 150 67 3 1,5 2,25
1R140X155X32 140 155 32 3 1,5 0,84
1R140X155X35 140 155 35 3 1,1 0,917
1R140X155X42 140 155 42 3 1,5 1,1
1R140X160X50 140 160 50 3 1,5 1,7
1R140X160X52 140 160 52 3 2 1,78
1R140X160X67 140 160 67 3 1,5 2,3
1R150X165X32 150 165 32 3 1,5 0,9
1R150X165X40 150 165 40 3 1,1 1,12
1R150X165X42 150 165 42 3 1,5 1,18
1R150X170X52 150 170 52 3 2 2
1R150X170X60 150 170 60 3 2 2,35
1R160X175X40 160 175 40 3 1,1 1,2
1R160X180X60 160 180 60 3 2 2,5
1R170X185X45 170 185 45 3 1,1 1,45
1R170X190X60 170 190 60 3 2 2,65
1R180X195X45 180 195 45 3 1,1 1,51
1R190X210X50 190 210 50 3,5 1,5 2,41
1R190X215X69 190 215 69 3,5 2 4,1
1R200X220X50 200 220 50 3,5 1,5 2,49
1R200X225X80 200 225 80 3,5 2,1 5,1
1R220X240X50 220 240 50 3,5 1,5 2,75
1R220X245X80 220 245 80 3,5 2,1 5,7
1R240X265X60 240 265 60 3,5 2 4,6
1R260X285X60 260 285 60 4 2 4,98
1R280X305X69 280 305 69 4 2 6,2
1R300X330X80 300 330 80 4 2,1 9,3
1R320X350X80 320 350 80 5 2,1 9,8
1R340X380X118 340 380 118 5 3 22

61 With You
 rs rs

rs rs

NKX NKX -- Z NKXR NKXR -- Z

Combined bearings
Part numbers Dimensions (mm) Basic load rating Basic load rating Limiting speeds Masse
radial (kN) axial (kN) (tr/min) (kg)
Fw dw D D1 D2 C C1 C2 a rs min dynamic static dyn. stat. grease oil
Cr Cor Ca Coa
NKX10T2 10 10 19 24 23 9 6,5 0,3 5,45 6,45 10 14 6700 9500 0,037
NKX10T2Z 10 10 19 25 23 9 6,5 19,7 0,3 5,45 6,45 10 14 6700 9500 0,039
NKX12T2 12 12 21 26 23 9 6,5 0,3 6 7,7 10,3 15,4 6400 9200 0,042
NKX12T2Z 12 12 21 27 23 9 6,5 21,7 0,3 6 7,7 10,3 15,4 6400 9200 0,044
NKX15T2 15 15 24 28 23 9 6,5 0,3 8,25 10,2 10,5 16,8 6200 8800 0,044
NKX15T2Z 15 15 24 29 23 9 6,5 23,7 0,3 8,25 10,2 10,5 16,8 6200 8800 0,048
NKXR15T2 15 15 24 28 23 9 6,5 23,7 0,3 8,25 10,2 12,2 26,8 2800 11000 0,048
NKXR15T2Z 15 15 24 29 23 9 6,5 23,7 0,3 8,25 10,2 12,2 26,8 2800 11000 0,052
NKX17T2 17 17 26 30 25 9 8 0,3 10,4 14,4 10,8 18,2 6000 8500 0,051
NKX17T2Z 17 17 26 31 25 9 8 25,7 0,3 10,4 14,4 10,8 18,2 6000 8500 0,056
NKXR17T2 17 17 26 30 25 9 8 25,7 0,3 10,4 14,4 12,7 29 2500 10000 0,05
NKXR17T2Z 17 17 26 31 25 9 8 25,7 0,3 10,4 14,4 12,7 29 2500 10000 0,053
NKX20T2 20 20 30 35 30 10 10,5 0,3 16,4 27,1 14,2 24,7 5200 7500 0,085
NKX20T2Z 20 20 30 36 30 10 10,5 30,7 0,3 16,4 27,1 14,2 24,7 5200 7500 0,09
NKXR20T2 20 20 30 35 30 10 10,5 30,7 0,3 16,4 27,1 20,2 46,5 2100 8500 0,09
NKXR20T2Z 20 20 30 36 30 10 10,5 30,7 0,3 16,4 27,1 20,2 46,5 2100 8500 0,095
NKX25 25 25 37 42 30 11 9,5 0,6 14,2 24 19,6 37 4600 6500 0,125
NKX25T2 25 25 37 42 30 11 9,5 0,6 14,2 24 19,6 37 4600 6500 0,125
NKX25T2Z 25 25 37 43 30 11 9,5 37,7 0,6 14,2 24 19,6 37 4600 6500 0,132
NKXR25T2 25 25 37 42 30 11 9,5 37,7 0,6 14,2 24 27,3 68 1800 7000 0,128
NKXR25T2Z 25 25 37 43 30 11 9,5 37,7 0,6 14,2 24 27,3 68 1800 7000 0,135
NKX30T2 30 30 42 47 30 11 9,5 0,6 22,3 39,5 20,4 42 4300 6200 0,14
NKX30T2Z 30 30 42 48 30 11 9,5 42,7 0,6 22,3 39,5 20,4 42 4300 6200 0,148
NKXR30T2 30 30 42 47 30 11 9,5 42,7 0,6 22,3 39,5 27,8 72,5 1500 6000 0,162
NKXR30T2Z 30 30 42 48 30 11 9,5 42,7 0,6 22,3 39,5 27,8 72,5 1500 6000 0,169
NKX35T2 35 35 47 52 30 12 9 0,6 20 36 20,4 44,5 3900 5600 0,167
NKX35Z 35 35 47 53 30 12 9 47,7 0,6 20 36 20,4 44,5 3900 5600 0,175
NKX35T2Z 35 35 47 53 30 12 9 47,7 0,6 20 36 20,4 44,5 3900 5600 0,175
NKXR35T2 35 35 47 52 30 12 9 47,7 0,6 20 36 31 87 1400 5500 0,184
NKXR35T2Z 35 35 47 53 30 12 9 47,7 0,6 20 36 31 87 1400 5500 0,195
NKX40 40 40 52 60 32 13 10 0,6 25,9 52,5 26,9 63 3500 5000 0,216
NKX40Z 40 40 52 61 32 13 10 55,7 0,6 25,9 52,5 26,9 63 3500 5000 0,225
NKXR40T2 40 40 52 60 32 13 10 55,7 0,6 25,9 52,5 43 121 1200 4800 0,226
NKXR40T2Z 40 40 52 61 32 13 10 55,7 0,6 25,9 52,5 43 121 1200 4800 0,237
NKX45 45 45 58 65 32 14 9 0,6 27,6 59 27,9 69 3200 4600 0,252
NKX45Z 45 45 58 66,5 32 14 9 60,5 0,6 27,6 59 27,9 69 3200 4600 0,265
NKXR45T2 45 45 58 65 32 14 9 60,5 0,6 27,6 59 45,5 135 1100 4400 0,267
NKXR45T2Z 45 45 58 66,5 32 14 9 60,5 0,6 27,6 59 45,5 135 1100 4400 0,286
NKX50 50 50 62 70 35 14 10 0,6 27,9 62 28,8 75,5 3100 4500 0,302
NKXR50T2 50 50 62 70 35 14 10 65,5 0,6 27,9 62 48,5 150 1000 4000 0,309
NKX50Z 50 50 62 71,5 35 14 10 65,5 0,6 27,9 62 28,8 75,5 3100 4500 0,318
NKXR50T2Z 50 50 62 71,5 35 14 10 65,5 0,6 27,9 62 48,5 150 1000 4000 0,329
NKX60 60 60 72 85 40 17 12 1 29,8 71,5 41,5 113 2600 3700 0,465
NKX60Z 60 60 72 86,5 40 17 12 80,5 1 29,8 71,5 41,5 113 2600 3700 0,484
NKX70 70 70 85 95 40 18 11 1 36,5 86 43 127 2400 3400 0,612

With You 62
 rs

rs

NK1A59

Needle roller bearings with angular contact ball bearings

Part numbers Dimensions (mm) Basic load rating Basic load rating Limiting speeds Mass (kg)
radial (kN) axial (kN) (tr/min)
d D C F rs min dynamc static dyn. stat. grease oil
Cr Cor Ca Coa
NK1A5902A 15 28 18 20 0,3 9,5 13,4 2,34 3,05 13000 20000 0,05
NK1A5903A 17 30 18 22 0,3 10,1 14,9 2,53 3,55 12000 18000 0,056
NK1A5904A 20 37 23 25 0,3 16,5 22,1 4,7 6,15 11000 16000 0,111
NK1A59/22A 22 39 23 28 0,3 17,5 24,8 4,9 6,75 9500 14000 0,12
NK1A5905A 25 42 23 30 0,3 18,6 27,4 5,1 7,35 8500 13000 0,13
NK1A5906A 30 47 23 35 0,3 19,4 30,5 5,4 8,55 7500 11000 0,147
NK1A5907A 35 55 27 42 0,6 25,7 46 7,4 12,3 6500 9500 0,243
NK1A5908A 40 62 30 48 0,6 31 61 7,75 14 5500 8500 0,347
NK1A5909A 45 68 30 55 0,6 33 69,5 8,5 17,1 5000 7500 0,401
NK1A5910A 50 72 30 60 0,6 33,5 73,5 8,8 18,7 4300 6500 0,41
NK1A5911A 55 80 34 63 1 44,5 95,5 14,3 33 4300 6500 0,59
NK1A5912A 60 85 34 68 1 45,5 101 14,8 36 4000 6000 0,632
NK1A5914A 70 100 40 80 1 62,5 146 18,6 47,5 3300 5000 1,05

rs

rs

ARN

Combined bearing with double-direction thrust cylindrical roller bearing

Part numbers Dimensions (mm) Basic load rating Basic load rating Limiting speeds Mass
radial (kN) axial (kN) (tr/min) (kg)
d dw D D1 T C F Dw rs min dynamic static dynamic static grease oil
Cr Cor Ca Coa
ARN3062T2P5 30 30 62 52 50 20 35 5 0,6 0,6 24,8 41,5 31 87 1400 5500
ARN3570T2 35 35 70 60 54 20 40 6 1 0,6 26,4 47 43 121 1200 4800
ARN4075T2P4 40 40 75 65 54 20 45 6 1 0,6 28 52,5 45,5 135 1100 4400
ARN4090P5 40 40 90 78 75 25 50 9 1 0,6 38,5 74,5 85 238 950 3800
ARN70130P5 70 70 130 115 82 25 80 11 1,1 0,6 57 119 142 460 650 2500

63 With You
 C B3

øa

øD øF ød1 øe øn G
h
G1

C1
B B2 KR -- LLH
B1
(withKR -- LLH
cage, sealed)
KR --
KR -- H
H (avec étanchéité
(aveccage)
(with cage) et cage)

C B3

øa

øD øF øn ød1 øe øn G

G1

C1
B B2 KR --
KR -- LL
LL
B1
(aveccage,
(with étanchéité
sealed)
KR
KR et cage)
(aveccage)
(with cage)

C B3

øa

øD øF øn ød1 øe øn G

G1

C1
B B2 KRV -- LL
B1

KRV
KRV
(avec étanchéité
(full-complement roller type)
sans cage)

Cam followers stud type truck rollers

Part numbers Dimensions (mm) Basic load rating Track load Limiting speeds Mass Max.
(kN) capacity (kN) (tr/min) (kg) tightening
D d1 C F B B1 B2 G G1 B3 C1 n a e h dynamic static spherical cylindrical grease oil torque
0 Cr Cor outer ring outer ring
-0,05 (N.m)
KR10T2H/3AS 10 3 7 4 8 17 9 M3X0.5 5 - 0,5 - - 7 2,5 1,64 1,27 0,56 27000 0,005 0,5
KRV10LLH/3AS 10 3 7 4 8 17 9 M3X0.5 5 - 0,5 - - 7 2,5 2,5 2,61 0,56 10000 0,005 0,5
KR12XT2LLH/3AS 12 4 8 4,8 9 20 11 M4X0.7 6 - 0,5 - - 8,5 2,5 2,17 1,69 1,79 10000 0,008 1
KRV12H/3AS 12 4 8 4,8 9 20 11 M4X0.7 6 - 0,5 - - 8,5 2,5 3,5 3,8 0,725 20000 0,008 1
KRV12LLH/3AS 12 4 8 4,8 9 20 11 M4X0.7 6 - 0,5 - - 8,5 2,5 3,5 3,8 0,725 10000 0,008 1
KR13T2LLH/3AS 13 5 9 5,75 10 23 13 M5X0.8 7,5 - 0,5 - - 9,5 3 2,65 2,26 0,805 10000 0,01 2
KR13XT2LLH/3AS 13 5 9 5,75 10 23 13 M5X0.8 7,5 - 0,5 - - 9,5 3 2,65 2,26 2,22 10000 0,01 2
KRV13LLH/3AS 13 5 9 5,75 10 23 13 M5X0.8 7,5 - 0,5 - - 9,5 3 4,65 5,55 0,805 10000 0,011 2
KR16FLLD0H/L588 16 6 11 8 12 28 16 M6X1 8 - 0,6 - - 12 3 4,05 4,2 1,08 10000 0,019 3
KR16FD0H/L588 16 6 11 8 12 28 16 M6X1 8 - 0,6 - - 12 3 4,05 4,2 1,08 19000 0,019 3
KR16F 16 6 11 8 12 28 16 M6X1 8 - 0,6 4 - 12 - 4,05 4,2 1,08 19000 25000 0,019 3
KR16FX 16 6 11 8 12 28 16 M6X1 8 - 0,6 4 - 12 - 4,05 4,2 3,4 19000 25000 0,019 3
KR16FXD0H/L588 16 6 11 8 12 28 16 M6X1 8 - 0,6 - - 12 3 4,05 4,2 3,4 19000 0,019 3
KR16FLL/3AS 16 6 11 8 12 28 16 M6X1 8 - 0,6 4 - 12 - 4,05 4,2 1,08 10000 0,019 3
KR16FXLL/3AS 16 6 11 8 12 28 16 M6X1 8 - 0,6 4 - 12 - 4,05 4,2 3,4 10000 0,019 3
KR16FXLLD0H/L588 16 6 11 8 12 28 16 M6X1 8 - 0,6 - - 12 3 4,05 4,2 3,4 10000 0,019 3
KRV16F/3AS 16 6 11 8 12 28 16 M6X1 8 - 0,6 4 - 12 - 6,5 9,35 1,08 13000 0,02 3
KRV16FD0H/L588 16 6 11 8 12 28 16 M6X1 8 - 0,6 - - 12 3 6,5 9,35 1,08 13000 0,02 3
KRV16FLL/3AS 16 6 11 8 12 28 16 M6X1 8 - 0,6 4 - 12 - 6,5 9,35 1,08 10000 0,02 3
KRV16FXLL/3AS 16 6 11 8 12 28 16 M6X1 8 - 0,6 4 - 12 - 6,5 9,35 3,4 10000 0,02 3
KRV16FXD0H/L588 16 6 11 8 12 28 16 M6X1 8 - 0,6 - - 12 3 6,5 9,35 3,4 13000 0,02 3
KRV16FLLD0H/L588 16 6 11 8 12 28 16 M6X1 8 - 0,6 - - 12 3 6,5 9,35 1,08 10000 0,02 3
KRV16FXLLD0H/L588 16 6 11 8 12 28 16 M6X1 8 - 0,6 - - 12 3 6,5 9,35 3,4 10000 0,02 3

…/…

With You 64
Cam followers stud type truck rollers
Part numbers Dimensions (mm) Basic load rating Track load Limiting speeds Mass Max.
(kN) capacity (kN) (tr/min) (kg) tightening
D d1 C F B B1 B2 G G1 B3 C1 n a e h dynamic static spherical cylindrical grease oil torque
0 Cr Cor outer ring outer ring
-0,05 (N.m)
KR19F 19 8 11 10 12 32 20 M8X1.25 10 - 0,6 4 - 14 - 4,75 5,4 1,08 15000 20000 0,031 8
KR19FX 19 8 11 10 12 32 20 M8X1.25 10 - 0,6 4 - 14 - 4,75 5,4 4,05 15000 20000 0,031 8
KR19FLL/3AS 19 8 11 10 12 32 20 M8X1.25 10 - 0,6 4 - 14 - 4,75 5,4 1,38 10000 0,031 8
KR19FXLL/3AS 19 8 11 10 12 32 20 M8X1.25 10 - 0,6 4 - 14 - 4,75 5,4 4,05 10000 0,031 8
KR19FD0H/L588 19 8 11 10 12 32 20 M8X1.25 10 - 0,6 - - 14 4 4,75 5,4 1,38 15000 0,031 8
KR19FXD0H/L588 19 8 11 10 12 32 20 M8X1.25 10 - 0,6 4 - 14 4 4,75 5,4 4,05 15000 0,031 8
KR19FLLD0H/L588 19 8 11 10 12 32 20 M8X1.25 10 - 0,6 - - 14 4 4,75 5,4 1,38 10000 0,031 8
KR19FXLLD0H/L588 19 8 11 10 12 32 20 M8X1.25 10 - 0,6 - - 14 4 4,75 5,4 4,05 10000 0,031 8
KRV19F/3AS 19 8 11 10 12 32 20 M8X1.25 10 - 0,6 4 - 14 - 7,45 11,7 1,38 10000 0,032 8
KRV19FLL/3AS 19 8 11 10 12 32 20 M8X1.25 10 - 0,6 4 - 14 - 7,45 11,7 1,38 10000 0,032 8
KRV19FXLL/3AS 19 8 11 10 12 32 20 M8X1.25 10 - 0,6 4 - 14 - 7,45 11,7 4,05 10000 0,032 8
KRV19FD0H/L588 19 8 11 10 12 32 20 M8X1.25 10 - 0,6 - - 14 4 7,45 11,7 1,38 10000 0,032 8
KRV19FXD0H/L588 19 8 11 10 12 32 20 M8X1.25 10 - 0,6 - - 14 4 7,45 11,7 4,05 10000 0,032 8
KRV19FLLD0H/L588 19 8 11 10 12 32 20 M8X1.25 10 - 0,6 - - 14 4 7,45 11,7 1,38 10000 0,032 8
KRV19FXLLD0H/L588 19 8 11 10 12 32 20 M8X1.25 10 - 0,6 - - 14 4 7,45 11,7 4,05 10000 0,032 8
KRX8X19X22.5/3AS 19 8 11 10 12 22,5 10,5 M8X1.25 6,5 - 0,6 - - 14 - 4,5 5,1 1,38 15000 0,017 8
KRX10X19X27PX1/3AS 19 10 10 11 14 27 13 - - - 2 4 - 17 - 8,5 14,2 3,65 9000 0,03 0
KR22C 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 5,3 6,65 1,69 12000 16000 0,046 14
KR22XCLL/3AS 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 5,3 6,65 5,15 10000 0,046 14
KR22F 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 5,3 6,65 1,69 12000 16000 0,046 14
KR22FH 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 5,3 6,65 1,69 12000 16000 0,046 14
KR22FX 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 5,3 6,65 5,15 12000 16000 0,046 14
KR22FXH 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 5,3 6,65 5,15 12000 16000 0,046 14
KR22FXH/3AS 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 5,3 6,65 5,15 12000 0,046 14
KR22FLL/3AS 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 5,3 6,65 1,69 10000 0,046 14
KR22FLLH/3AS 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 5,3 6,65 1,69 10000 0,046 14
KR22FXLL/3AS 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 5,3 6,65 5,15 10000 0,046 14
KR22FXLLH/3AS 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 5,3 6,65 5,15 10000 0,046 14
KR22LLD0/LP03 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 - - 17 - 5,3 6,65 1,69 2500 0,046 14
KRV22CLL/3AS 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 8,2 14 1,69 8500 0,047 14
KRV22F/3AS 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 8,2 14 1,69 8500 0,047 14
KRV22FH/3AS 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 8,2 14 1,69 8500 0,047 14
KRV22FXH/3AS 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 8,2 14 5,15 8500 0,047 14
KRV22FLL/3AS 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 8,2 14 1,69 8500 0,047 14
KRV22FLLH/3AS 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 8,2 14 1,69 8500 0,047 14
KRV22FXLL/3AS 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 8,2 14 5,15 8500 0,047 14
KRV22FXLLH/3AS 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 8,2 14 5,15 8500 0,047 14
KRV22LLH2/3ASV1 22 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 8,2 14 1,69 8500 0,047 14
KRX10X22X28-4PX1 22 10 12 12 13 28 15 - - 7 0,6 6 2 17 - 5,05 6,25 5,15 12000 16000 0,04 0
KRX13X24X34-1PX1/3AS 24 13 12 13,85 16 34 18 - - - 2 5 - 22 - 11,5 22,5 5,6 7200 0,068 0
KR26C 26 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 5,3 6,65 2,12 12000 16000 0,059 14
KR26CLL/3AS 26 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 5,3 6,65 2,12 10000 0,059 14
KR26F 26 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 5,3 6,65 2,12 12000 16000 0,059 14
KR26FH 26 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 5,3 6,65 2,12 12000 16000 0,059 14
KR26FXH 26 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 5,3 6,65 6,1 12000 16000 0,059 14
KR26FLL/3AS 26 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 5,3 6,65 2,12 10000 0,059 14
KR26FXLL/3AS 26 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 5,3 6,65 6,1 10000 0,059 14
KR26FLLH/3AS 26 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 5,3 6,65 2,12 10000 0,059 14
KR26FXLLH/3AS 26 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 5,3 6,65 6,1 10000 0,059 14
KRV26FH/3AS 26 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 8,2 14 2,12 8500 0,061 14
KRV26FXH/3AS 26 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 8,2 14 6,1 8500 0,061 14
KRV26FLL/3AS 26 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 - 8,2 14 2,12 8500 0,061 14
KRV26FLLH/3AS 26 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 8,2 14 2,12 8500 0,061 14
KRV26FXLLH/3AS 26 10 12 12 13 36 23 M10X1.25 12 - 0,6 4 - 17 4 8,2 14 6,1 8500 0,061 14
KRX14.5X26X37-4PX1/3AS 26 14,5 12 15,41 17 37 20 - - - 2,3 5 - 24 - 12,1 10,6 6,1 6400 0,097 0
KRX14X28X35.5-1PX3/3AS 28 14 12 15,41 17 35,5 18,5 - - - 2,4 - - 24 - 12,4 25 6,5 6400 0,093 0
KR30 30 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 - 7,85 9,65 2,62 10000 13000 0,087 20
KR30H 30 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 6 7,85 9,65 2,62 10000 13000 0,087 20
KR30X 30 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 - 7,85 9,65 7,7 10000 13000 0,087 20
KR30XH 30 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 6 7,85 9,65 7,7 10000 13000 0,087 20
KR30LL/3AS 30 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 - 7,85 9,65 2,62 10000 0,087 20
KR30LLH/3AS 30 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 6 7,85 9,65 2,62 10000 0,087 20
KR30XLL/3AS 30 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 - 7,85 9,65 7,7 10000 0,087 20
KR30XLLH/3AS 30 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 6 7,85 9,65 7,7 10000 0,087 20
KRX17.5X30X41PX1/3AS 30 17,5 14 18,51 19 41 22 - - - 2,3 5 - 28 - 16 35 7,7 5400 0,133 0
KRV30/3AS 30 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 - 12 20,3 2,62 6500 0,089 20
KRV30H/3AS 30 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 6 12 20,3 2,62 6500 0,089 20
KRV30LL/3AS 30 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 - 12 20,3 2,62 6500 0,089 20
KRV30LLH/3AS 30 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 6 12 20,3 2,62 6500 0,089 20
KRV30XLLH/3AS 30 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 6 12 20,3 7,7 6500 0,089 20
KR32 32 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 - 7,85 9,65 2,86 10000 13000 0,097 20
KR32H 32 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 6 7,85 9,65 2,86 10000 13000 0,097 20
KR32XH 32 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 6 7,85 9,65 8,2 10000 13000 0,097 20
KR32LL/3AS 32 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 - 7,85 9,65 2,86 10000 0,097 20
KR32LLH/3AS 32 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 6 7,85 9,65 2,86 10000 0,097 20
KR32XLL/3AS 32 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 - 7,85 9,65 8,2 10000 0,097 20
KR32XLLH/3AS 32 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 6 7,85 9,65 8,2 10000 0,097 20
KRV32H/3AS 32 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 6 12 20,3 2,86 6500 0,1 20
…/…

65 With You
 C B3

øa

øD øF ød1 øe øn G
h
G1

C1
B B2 KR -- LLH
B1
(withKR -- LLH
cage, sealed)
KR --
KR -- H
H (avec étanchéité
(aveccage)
(with cage) et cage)

C B3

øa

øD øF øn ød1 øe øn G

G1

C1
B B2 KR --
KR -- LL
LL
B1
(aveccage,
(with étanchéité
sealed)
KR
KR et cage)
(aveccage)
(with cage)

C B3

øa

øD øF øn ød1 øe øn G

G1

C1
B B2 KRV -- LL
B1

KRV
KRV
(avec étanchéité
(full-complement roller type)
sans cage)

Cam followers stud type truck rollers

Part numbers Dimensions (mm) Basic load rating Track load Limiting speeds Mass Max.
(kN) capacity (kN) (tr/min) (kg) tightening
D d1 C F B B1 B2 G G1 B3 C1 n a e h dynamic static spherical cylindrical grease oil torque
0 Cr Cor outer ring outer ring
-0,05 (N.m)
KRV32LL/3AS 32 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 - 12 20,3 2,86 6500 0,1 20
KRV32LLH/3AS 32 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 6 12 20,3 2,86 6500 0,1 20
KRV32XLL/3AS 32 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 - 12 20,3 8,2 6500 0,1 20
KRV32XLLH/3AS 32 12 14 15 15 40 25 M12X1.5 13 6 0,6 6 3 23 6 12 20,3 8,2 6500 0,1 20
KRX12X32X45-3/3AS 32 12 14 15,06 15 45 30 M12X1.5 13 - 0,6 - - 23 6 12 20,3 2,86 6600 0,105 20
KRX12X32X45-14/3AS 32 12 14 15,06 15 45 30 M12X1.5 13 - 0,6 5,9 - 23 6 12 20,3 2,86 6600 0,102 20
KRX14X32X47/3AS 32 14 16 17 18,5 47 28,5 M14X1.5 14 8 1,5 3 3 25 - 10,6 14,8 2,86 8800 0,124 34
KRX20.5X34X46-3PX1/3AS 34 20,5 16 21,01 22 46 24 - - - 2,9 6 - 32 - 21,1 45,5 3,1 4700 0,335 0
KRX20.5X34X46PX1/3AS 34 20,5 16 21,01 22 46 24 - - - 2,9 6 - 32 - 21,1 45,5 10,1 4700 0,169 0
KR35 35 16 18 18 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 27 - 12,2 17,9 3,2 8000 11000 0,169 52
KR35H 35 16 18 18 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 27 6 12,2 17,9 3,2 8000 11000 0,169 52
KR35H/3AS 35 16 18 18 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 27 6 12,2 17,9 3,2 8000 0,169 52
KR35XH 35 16 18 18 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 27 6 12,2 17,9 11,9 8000 11000 0,169 52
KR35LL/3AS 35 16 18 18 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 27 - 12,2 17,9 3,2 8000 0,169 52
KR35LLH/3AS 35 16 18 18 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 27 6 12,2 17,9 3,2 8000 0,169 52
KR35XLL/3AS 35 16 18 18 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 27 - 12,2 17,9 11,9 8000 0,169 52
KR35XLLH/3AS 35 16 18 18 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 27 6 12,2 17,9 11,9 8000 0,169 52
KRV35H/3AS 35 16 18 18 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 27 6 17,6 34 3,2 5500 0,172 52
KRV35XH/3AS 35 16 18 18 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 27 6 17,6 34 11,9 5500 0,172 52
KRV35LL/3AS 35 16 18 18 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 27 - 17,6 34 3,2 5500 0,172 52
KRV35LLH/3AS 35 16 18 18 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 27 6 17,6 34 3,2 5500 0,172 52
KRV35XLL/3AS 35 16 18 18 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 27 - 17,6 34 11,9 5500 0,172 52
KRV35XLLH/3AS 35 16 18 18 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 27 6 17,6 34 11,9 5500 0,172 52
KRX16X35X44.5/3AS 35 16 18 18 19,5 44,5 25 - - - 0,8 - - - - 11,8 17,3 3,2 8300 0,165 0
KR40 40 18 20 22 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 32 - 14 22,8 3,85 7000 9000 0,248 76
KR40H 40 18 20 22 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 32 6 14 22,8 3,85 7000 9000 0,248 76
KR40H/3AS 40 18 20 22 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 32 6 14 22,8 3,85 7000 0,248 76
KR40X 40 18 20 22 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 32 - 14 22,8 14,5 7000 9000 0,248 76
KR40XH 40 18 20 22 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 32 6 14 22,8 14,5 7000 9000 0,248 76

…/…
With You 66
Cam followers stud type truck rollers
Part numbers Dimensions (mm) Basic load rating Track load Limiting speeds Mass Max.
(kN) capacity (kN) (tr/min) (kg) tightening
D d1 C F B B1 B2 G G1 B3 C1 n a e h dynamic static spherical cylindrical grease oil torque
0 Cr Cor outer ring outer ring
-0,05 (N.m)
KR40LL/3AS 40 18 20 22 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 32 - 14 22,8 3,85 7000 0,248 76
KR40LLH/3AS 40 18 20 22 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 32 6 14 22,8 3,85 7000 0,248 76
KR40XLL/3AS 40 18 20 22 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 32 - 14 22,8 14,5 7000 0,248 76
KR40XLLH/3AS 40 18 20 22 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 32 6 14 22,8 14,5 7000 0,248 76
KRV40/3AS 40 18 20 22 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 32 - 19,4 42 3,65 4500 0,252 76
KRV40H/3AS 40 18 20 22 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 32 6 19,4 42 3,65 4500 0,252 76
KRV40LL/3AS 40 18 20 22 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 32 - 19,4 42 3,65 4500 0,252 76
KRV40LLH/3AS 40 18 20 22 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 32 6 19,4 42 3,65 4500 0,252 76
KRV40XLL/3AS 40 18 20 22 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 32 - 19,4 42 14,5 4500 0,252 76
KRV40XLLH/3AS 40 18 20 22 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 32 6 19,4 42 14,5 4500 0,252 76
KRX18X40X54.5-4/3AS 40 18 24 21,62 25,4 54,5 29,1 - - 10 0,8 3 3 23 - 33 44 5,9 4600 0,215 0
KRX18X40X46.5-12PX1/3AS 40 18 24 21,62 25,5 46,5 21 - - 10 0,8 6 3 23 - 33 44 5,9 4600 0,161 0
KRX18X40X46.5-2/3AS 40 18 24 21,62 25,5 46,5 21 - - 10 0,8 6 3 23 - 33 44 5,9 4600 0,161 0
KRX18X40X60.5-1/3AS 40 18 24 21,62 25,4 60,5 35,1 - - 10 0,8 6 3 23 - 33 44 5,9 4600 0,26 0
KRX18X40X64.5-4/3AS 40 18 24 21,62 25,5 64,5 39 - - 10 0,8 6 3 23 - 33 44 5,9 4600 0,316 0
KRX18X40X69.5-7/3AS 40 18 29 21,62 30,5 69,5 39 - - 10 0,8 6 3 23 - 36 48,5 5,9 4600 0,358 0
KR47 47 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 - 20,7 33,5 4,7 6000 8000 0,386 98
KR47H 47 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 8 20,7 33,5 4,7 6000 8000 0,386 98
KR47X 47 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 - 20,7 33,5 21 6000 8000 0,386 98
KR47LL/3AS 47 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 - 20,7 33,5 4,7 6000 0,386 98
KR47LLH/3AS 47 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 8 20,7 33,5 4,7 6000 0,386 98
KR47LLD0H/LP03 47 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 - - 37 8 20,7 33,5 4,7 1200 0,386 98
KR47XLL/3AS 47 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 - 20,7 33,5 21 6000 0,386 98
KR47XLLH/3AS 47 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 8 20,7 33,5 21 6000 0,386 98
KRV47/3AS 47 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 - 28,8 61 4,7 4000 0,392 98
KRV47LL/3AS 47 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 - 28,8 61 4,7 4000 0,392 98
KRV47LLH/3AS 47 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 8 28,8 61 4,7 4000 0,392 98
KRV47XLL/3AS 47 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 - 28,8 61 21 4000 0,392 98
KRV47XLLH/3AS 47 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 8 28,8 61 21 4000 0,392 98
KRX18X47X50.5-2/3AS 47 18 28 24,49 29,5 50,5 21 - - 10 0,8 8 3 27 - 41,5 49,5 4,8 4000 0,387 0
KR52 52 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 8 20,7 33,5 5,55 6000 8000 0,461 98
KR52H 52 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 8 20,7 33,5 5,55 6000 8000 0,461 98
KR52X 52 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 - 20,7 33,5 23,3 6000 8000 0,461 98
KR52LL/3AS 52 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 - 20,7 33,5 5,55 6000 0,461 98
KR52LLH/3AS 52 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 8 20,7 33,5 5,55 6000 0,461 98
KR52XLL/3AS 52 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 - 20,7 33,5 23,3 6000 0,461 98
KR52XLLH/3AS 52 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 8 20,7 33,5 23,3 6000 0,461 98
KRV52H/3AS 52 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 8 28,8 61 5,55 4000 0,465 98
KRV52LL/3AS 52 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 - 28,8 61 5,55 4000 0,465 98
KRV52LLH/3AS 52 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 8 28,8 61 5,55 4000 0,465 98
KRV52XLL/3AS 52 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 - 28,8 61 23,3 4000 0,465 98
KRV52XLLH/3AS 52 20 24 25 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 37 8 28,8 61 23,3 4000 0,465 98
KR62 62 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 - 28,9 55 6,95 5000 6500 0,79 178
KR62H 62 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 8 28,9 55 6,95 5000 6500 0,79 178
KR62X 62 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 - 28,9 55 34,5 5000 6500 0,79 178
KR62XH 62 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 8 28,9 55 34,5 5000 6500 0,79 178
KR62LL/3AS 62 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 - 28,9 55 6,95 5000 0,79 178
KR62LLH/3AS 62 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 8 28,9 55 6,95 5000 0,79 178
KR62XLL/3AS 62 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 8 28,9 55 34,5 5000 0,79 178
KR62XLLH/3AS 62 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 8 28,9 55 34,5 5000 0,79 178
KRV62H/3AS 62 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 8 39,5 98,5 6,95 3300 0,8 178
KRV62LLH/3AS 62 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 8 39,5 98,5 6,95 3300 0,8 178
KRV62XLLH/3AS 62 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 8 39,5 98,5 34,5 3300 0,8 178
KR72 72 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 - 28,9 55 8,05 5000 6500 1,04 178
KR72H 72 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 8 28,9 55 8,05 5000 6500 1,04 178
KR72LL/3AS 72 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 - 28,9 55 8,05 5000 1,04 178
KR72LLH/3AS 72 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 8 28,9 55 8,05 5000 1,04 178
KR72XLL/3AS 72 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 - 28,9 55 38,5 5000 1,04 178
KR72XLLH/3AS 72 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 8 28,9 55 38,5 5000 1,04 178
KRV72LL/3AS 72 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 - 39,5 98,5 8,05 3300 1,05 178
KRV72LLH/3AS 72 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 8 39,5 98,5 8,05 3300 1,05 178
KRV72XLLH/3AS 72 24 29 30 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 8 39,5 98,5 38,5 3300 1,05 178
KR80 80 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 - 45 88,5 9,8 4000 5500 1,55 360
KR80H 80 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 8 45 88,5 9,8 4000 5500 1,55 360
KR80LL/3AS 80 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 - 45 88,5 9,8 4000 1,55 360
KR80LLH/3AS 80 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 8 45 88,5 9,8 4000 1,55 360
KR80XLL/3AS 80 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 - 45 88,5 53 4000 1,55 360
KR80XLLH/3AS 80 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 8 45 88,5 53 4000 1,55 360
KRV80LL/3AS 80 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 - 58 147 9,8 2600 1,56 360
KRV80LLH/3AS 80 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 8 58 147 9,8 2600 1,56 360
KRV80XLL/3AS 80 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 - 58 147 53 2600 1,56 360
KRV80XLLH/3AS 80 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 8 58 147 53 2600 1,56 360
KR85LL/3AS 85 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 - 45 88,5 10,4 4000 1,74 360
KR85LLH/3AS 85 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 8 45 88,5 10,4 4000 1,74 360
KR90 90 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 - 45 88,5 11,4 4000 5500 1,95 360
KR90LL/3AS 90 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 - 45 88,5 59 4000 1,95 360
KR90LLH/3AS 90 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 8 45 88,5 59 4000 1,95 360
KR90XLL/3AS 90 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 - 45 85,5 53 4000 1,95 360
KR90XLLH/3AS 90 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 8 45 88,5 53 4000 1,95 360
KRV90LL/3AS 90 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 - 58 147 11,4 2600 1,97 360
KRV90LLH/3AS 90 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 8 58 147 11,4 2600 1,97 360
KRV90XLLH/3AS 90 30 35 38 37 100 63 M30X1.5 32 15 1 8 4 53 8 58 147 59 2600 1,97 360

67 With You
 C

øD øF m ød1 øe m G

G1

C1
B B2 KRT
B1 KRT -- LL
-- LL
(with(avec
cage,cage
sealed)
KRT
KRT et étanchéité)
(with cage)
(avec cage)

øD øF m ød1 øe m G

G1

C1
B B2 KRVT -- LL
B1

KRVT
KRVT
(sans
(full cage)
complement)

øD øF m ød1 øe m G

G1

C1
B B2
B1

NUKRT

Cam followers stud type truck rollers

Part numbers Dimensions (mm) Basic load rating Track load Limiting speeds Mass Max.
(kN) capacity (kN) (tr/min) (kg) tightening
D d1 C F B B1 B2 G G1 C1 m e dynamic static spherical cylindrical grease oil torque
0 Cr Cor outer ring outer ring
-0,05 (N.m)
KRT22 22 10 12 12 13 36 23 M10X1.25 12 0,6 M4X0.7 17 5,3 6,65 1,69 12000 16000 0,046 14
KRT22XLL 22 10 12 12 13 36 23 M10X1.25 12 0,6 M4X0.7 17 5,3 6,65 5,15 10000 10000 0,046 14
KRT26XLL/3AS 26 10 12 12 13 36 23 M10X1.25 12 0,6 M4X0.7 17 5,3 6,65 5,15 10000 10000 0,046 14
KRVT30LL/3AS 30 12 14 15 15 40 25 M12X1.5 13 0,6 M6x0.75 23 12 20,3 2,62 6500 0,089 20
KRT35LL/3AS 35 16 18 18 19 52 32,5 M16X1.5 17 0,8 PT 1/8 27 12,2 17,9 3,2 8000 0,169 52
KRVT35XLL/3AS 35 16 18 18 19,5 52 32,5 M16X1.5 17 0,8 PT 1/8 27 17,6 34 11,9 5500 0,172 52
NUKRT35/3AS 35 16 18 19 19,5 52 32,5 M16X1.5 17 0,8 PT 1/8 21 22,3 25,7 3,2 0 5500 0,165 52
KRVT35XLL 35 16 18 18 19,5 52 32,5 M16X1.5 17 0,8 PT 1/8 27 17,6 34 11,9 5500 7000 0,172 52
KRT40 40 18 20 22 21,5 58 36,5 M18X1.5 19 0,8 PT 1/8 32 14 22,8 3,85 7000 9000 0,169 52
KRT40XLL/3AS 40 18 20 22 21,5 58 36,5 M18X1.5 19 0,8 PT 1/8 32 14 22,8 14,5 7000 0,248 76
KRVT40XLL/3AS 40 18 20 22 19,5 58 36,5 M18X1.5 19 0,8 PT 1/8 32 19,4 42 14,5 4500 0,252 76
NUKRT40/3AS 40 18 20 21,5 21,5 58 36,5 M18X1.5 19 0,8 PT 1/8 23 24,1 29,1 3,85 4700 0,242 76
KRVT40LL/3AS 40 18 20 22 21,5 58 36,5 M18X1.5 19 0,8 PT 1/8 32 19,4 42 3,85 4500 0,252 76
KRT40LL/3AS 40 18 20 22 19,5 58 36,5 M18X1.5 19 0,8 PT 1/8 32 14 22,8 3,85 7000 0,248 76
KRT47XLL/3AS 47 20 24 25 25,5 66 40,5 M20X1.5 21 0,8 PT 1/8 37 20,7 33,5 21 6000 0,386 98
KRVT47LL/3AS 47 20 24 25 25,5 66 40,5 M20X1.5 21 0,8 PT 1/8 37 28,8 61 4,7 4000 0,39 98
NUKRT47/3AS 47 20 24 25,5 25,5 66 40,5 M20X1.5 21 0,8 PT 1/8 27 38,5 48 4,7 4000 0,38 98
KRVT47XLL/3AS 47 20 24 25 25,5 66 40,5 M20X1.5 21 0,8 PT 1/8 37 28,8 61 21 4000 0,39 98
NUKRT47X/3AS 47 20 24 25,5 25,5 66 40,5 M20X1.5 21 0,8 PT 1/8 27 38,5 48 21 4000 0,38 98
NUKRT52/3AS 52 20 24 30 25,5 66 40,5 M20X1.5 21 0,8 PT 1/8 31 42,5 57,5 5,55 3300 0,45 98
KRVT52XLL/3AS 52 20 24 25 25,5 66 40,5 M20X1.5 21 0,8 PT 1/8 37 28,8 61 23,3 4000 0,46 98
KRT52XLL/3AS 52 20 24 25 25,5 66 40,5 M20X1.5 21 0,8 PT 1/8 37 20,7 33,5 23,3 6000 0,416 98
KRVT52LL/3AS 52 20 24 25 25,5 66 40,5 M20X1.5 21 0,8 PT 1/8 37 28,8 61 5,55 4000 0,465 98
NUKRT62/3AS 62 24 29 35 30,5 80 49,5 M24X1.5 25 0,8 PT 1/8 38 56,5 72,5 6,95 2900 0,795 178
KRT62XLL/3AS 62 24 29 30 30,5 80 49,5 M24X1.5 25 0,8 PT 1/8 44 28,9 55 34,5 5000 0,79 178
KRT80LL/3AS 80 30 35 38 37 100 63 M30X1.5 32 1 PT 1/8 53 45 88,5 9,8 4000 1,55 360
NUKRT90X/3AS 90 30 35 47,5 37 100 63 M30X1.5 32 1 PT 1/8 51 101 151 59 2100 1,96 360

With You 68
 C

øD øF m ød1 øe m G
E

0
R = 50
G1
C1
B B2
B1

KRU

Cam followers with eccentric stud

CONSULT US

69 With You
 C B3

øa

øD øF øn ød1 øe øn G

G1

C1 B2
B1

NUKR - CRV

C B3 C

øa

øD øF øe ød1 øn G øD øF øe ød1 øm G
h
G1 G1

C1 C1
B B2 B B2
B1 B1

NUKR -- H (D < 100 mm) NUKR -- H (D ≥ 100 mm)

Cam followers stud type truck rollers

Part numbers Dimensions (mm) Basic load rating Track load Limiting Mass Max.
(kN) capacity (kN) speeds (kg) tightening
D d1 C F B B1 B2 G G1 B3 C1 n m a e h dynamic static spherical cylindrical (tr/min) torque
0 Cr Cor outer ring outer ring
-0,05 (N.m)
CRV14XLL/3AS 22,225 9,525 12,7 11 14,3 36,5 22,2 3/8-24UNF 9,5 6,35 0,8 4 3 15,5 8,05 13,3 5,35 9000 0,048 13
CR16XH 25,4 11,112 15,875 13 17,4 42,8 25,4 7/16-20UNF 12,7 6,35 0,8 4 3 21 6,35 7,25 8,35 7,4 12000 0,087 18
CRV16XLL/3AS 25,4 11,112 15,875 14 17,4 43 25,4 7/16-20UNF 12,7 6,35 0,8 4 3 19,5 11,7 18,9 7,4 7100 0,08 18
NUKR30/3AS 30 12 14 14,5 15 40 25 M12X1.5 13 6 0,6 6 3 15 13,3 13,5 2,62 6900 0,068 20
CRV20XLLH/3AS 31,75 12,7 19,05 18,47 20,6 52,4 31,8 1/2-20UNF 15,9 7,94 0,8 6 3 25 6,35 17,7 35 11,4 5400 0,14 24
NUKR35/3AS 35 16 18 19 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 21 22,3 25,7 3,2 5500 0,165 52
NUKR35H/3AS 35 16 18 19 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 21 6 22,3 25,7 3,2 5500 0,165 52
NUKR35X/3AS 35 16 18 19 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 21 22,3 25,7 11,9 5500 0,165 52
NUKR35XH/3AS 35 16 18 19 19,5 52 32,5 M16X1.5 17 8 0,8 6 3 21 6 22,3 25,7 11,9 5500 0,165 52
NUKR40/3AS 40 18 20 21,5 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 23 24,1 29,1 3,85 4700 0,242 76
NUKR40H/3AS 40 18 20 21,5 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 23 6 24,1 29,1 3,85 4700 0,242 76
NUKR40X/3AS 40 18 20 21,5 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 23 24,1 29,1 14,5 4700 0,242 76
NUKR40XH/3AS 40 18 20 21,5 21,5 58 36,5 M18X1.5 19 8 0,8 6 3 23 6 24,1 29,1 14,5 4700 0,242 76
NUKR47/3AS 47 20 24 25,5 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 27 38,5 48 4,7 4000 0,38 98
NUKR47H/3AS 47 20 24 25,5 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 27 8 38,5 48 4,7 4000 0,38 98
NUKR47X/3AS 47 20 24 25,5 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 27 38,5 48 21 4000 0,38 98
NUKR47XH/3AS 47 20 24 25,5 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 27 8 38,5 48 21 4000 0,38 98
NUKR52/3AS 52 20 24 30 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 31 42,5 57,5 5,55 3300 0,45 98
NUKR52H/3AS 52 20 24 30 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 31 8 42,5 57,5 5,55 3300 0,45 98
NUKR52X/3AS 52 20 24 30 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 31 42,5 57,5 23,3 3300 0,45 98
NUKR52XH/3AS 52 20 24 30 25,5 66 40,5 M20X1.5 21 9 0,8 8 4 31 8 42,5 57,5 23,3 3300 0,45 98
NUKR62/3AS 62 24 29 35 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 38 56,5 72,5 6,95 2900 0,795 178
NUKR62H/3AS 62 24 29 35 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 38 8 56,5 72,5 6,95 2900 0,795 178
NUKR62X/3AS 62 24 29 35 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 38 56,5 72,5 34,5 2900 0,795 178
NUKR62XH/3AS 62 24 29 35 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 38 8 56,5 72,5 34,5 2900 0,795 178
NUKR72/3AS 72 24 29 41,5 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 62 85,5 8,05 2400 1,01 178
NUKR72H/3AS 72 24 29 41,5 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 8 62 85,5 8,05 2400 1,01 178
NUKR72X/3AS 72 24 29 41,5 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 62 85,5 38,5 2400 1,01 178
NUKR72XH/3AS 72 24 29 41,5 30,5 80 49,5 M24X1.5 25 11 0,8 8 4 44 8 62 85,5 38,5 2400 1,01 178
NUKR80/3AS 80 30 35 47,5 37 100 63 M30X1.5 32 15 1 8 4 51 101 151 9,8 2100 1,54 360
NUKR80H/3AS 80 30 35 47,5 37 100 63 M30X1.5 32 15 1 8 4 51 8 101 151 9,8 2100 1,54 360
NUKR80X/3AS 80 30 35 47,5 37 100 63 M30X1.5 32 15 1 8 4 51 101 151 53 2100 1,54 360
NUKR80XH/3AS 80 30 35 47,5 37 100 63 M30X1.5 32 15 1 8 4 51 8 101 151 53 2100 1,54 360
NUKR90/3AS 90 30 35 47,5 37 100 63 M30X1.5 32 15 1 8 4 51 101 151 11,4 2100 1,96 360
NUKR90H/3AS 90 30 35 47,5 37 100 63 M30X1.5 32 15 1 8 4 51 8 101 151 11,4 2100 1,96 360
NUKR90X/3AS 90 30 35 47,5 37 100 63 M30X1.5 32 15 1 8 4 51 101 151 59 2100 1,96 360
NUKR90XH/3AS 90 30 35 47,5 37 100 63 M30X1.5 32 15 1 8 4 51 8 101 151 59 2100 1,96 360
NUKR100/3AS 100 36 43 48,5 46 120 74 M36X1.5 38 1,5 8 PT 1/8 53 119 167 13 2000 3,08 630
NUKR100H/3AS 100 36 43 48,5 46 120 74 M36X1.5 38 1,5 PT 1/8 53 14 119 167 13 2000 3,08 630
NUKR100XH/3AS 100 36 43 48,5 46 120 74 M36X1.5 38 1,5 PT 1/8 53 14 119 167 79 2000 3,08 14
CRV64H/3AS 101,6 38,1 57,15 44,5 58,7 147,6 88,9 1 1/2-12UNF 38,1 19,05 0,8 8 5 63 3/4 106 244 13,2 2200 4,32 760
CRV64XLLH/3AS 101,6 38,1 57,15 44,5 58,7 147,6 88,9 1 1/2-12UNF 38,1 19,05 0,8 8 5 63 3/4 106 244 113 2200 4,32 760
NUKR150/3AS 150 52 60 75,5 63 170 107 M52X1.5 52 1,5 8 PT 1/8 85,5 258 380 22 1300 9,7 1950
NUKR150H/3AS 150 52 60 75,5 63 170 107 M52X1.5 52 1,5 PT 1/8 85,5 17 258 380 22 1300 9,7 1950
NUKR180H/3AS 180 64 72 91,5 76 200 124 M64X3 65 2 PT 1/8 103,5 17 365 555 27,9 1000 17 3670

With You 70
 C
C

R500
øD øE øFw øD øe øFw

RNAB2 RNA22 - LL

Cam followers stud type truck rollers

Part numbers Dimensions (mm) Basic load rating (kN) Track load capacity (kN) Limiting speeds Mass (kg)
(tr/min)
D Fw C E/e dynamic static spherical cylindrical grease oil
Cr Cor outer ring outer ring
RNAB2/5XT2 16 7 7,8 10 2,82 2,52 2,32 21000 27000 0,0085
RNAB2/5T2 16 7 7,8 10 2,82 2,52 1,08 21000 27000 0,0085
RNAB2/6T2 19 10 9,8 13 4,7 5,35 1,37 15000 20000 0,013
RNAB2/6XT2 19 10 9,8 13 4,7 5,35 3,57 15000 20000 0,013
RNA22/6LL/3AS 19 10 11,8 0 4,55 4,25 1,38 10000 0,018
RNA22/6XLL/3AS 19 10 11,8 0 4,55 4,25 4,4 10000 0,018
RNA22/8LL/3AS 24 12 11,8 0 5,15 5,25 1,9 10000 0,027
RNAB2/8X 24 12 9,8 15 5,2 6,4 4,5 12000 16000 0,021
RNA22/8XLL/3AS 24 12 11,8 18 4,55 4,25 5,5 10000 0,018
RNAB2/8 24 12 9,8 15 5,2 6,4 1,89 12000 16000 0,021
RNA2200LL/3AS 30 14 13,8 0 7,55 9 2,62 10000 0,052
RNAB200X 30 14 11,8 20 9,7 5,2 6,91 11000 14000 0,042
RNA2200XLL/3AS 30 14 13,8 0 7,55 9 7,55 10000 0,052
RNAB200 30 14 11,8 20 9,7 5,2 2,6 11000 14000 0,042
RNA2201LL/3AS 32 16 13,8 0 8,1 10,3 2,86 9500 0,057
RNAB201 32 16 11,8 22 12,1 13,1 2,85 9500 12500 0,049
RNAB201X 32 16 11,8 22 12,1 13,1 7,36 9500 12500 0,049
RNA2201XLL/3AS 32 16 13,8 0 8,1 10,3 8,05 9500 0,057
RNA2202XLL/3AS 35 20 13,8 0 9,85 14,1 8,9 7500 0,06
RNA2202LL/3AS 35 20 13,8 0 9,85 14,1 3,2 7500 0,06
RNAB202X 35 20 11,8 26 13,3 15,7 8,06 7500 10000 0,05
RNAB202 35 20 11,8 26 13,3 15,7 3,21 7500 10000 0,05
RNA2203LL/3AS 40 22 15,8 0 10,4 15,6 3,85 7000 0,094
RNAB203 40 22 15,8 29 19,5 23,8 3,82 6800 9000 0,088
RNAB203X 40 22 15,8 29 19,5 23,8 12,7 6800 9000 0,088
RNA2203XLL/3AS 40 22 15,8 0 10,4 15,6 10,9 7000 0,094
RNA2204XLL/3AS 47 25 17,8 33 16,9 22,9 14,8 6000 0,152
RNA2204LL/3AS 47 25 17,8 0 16,9 22,9 4,7 6000 0,152
RNAB204X 47 25 15,8 32 20,3 25,9 14,8 6000 8000 0,13
RNAB204 47 25 15,8 32 20,3 25,9 4,76 6000 8000 0,13
RNA2204LL 47 25 17,8 33 16,9 22,9 4,7 6000 0,152
RNA2205LL/3AS 52 30 17,8 0 17,9 25,9 5,55 5000 0,179
RNA2205XLL/3AS 52 30 17,8 0 17,9 25,9 16,4 5000 0,179
RNAB205 52 30 15,8 37 22,7 32 5,47 5000 6500 0,15
RNAB205X 52 30 15,8 37 22,7 32 16,4 5000 6500 0,15
RNA2206LL/3AS 62 35 19,8 0 21,4 34,5 6,95 4300 0,284
RNAB206X 62 38 19,8 46 35 54 23,5 4000 5500 0,255
RNA2207LL/3AS 72 42 22,7 0 26,3 47,5 8,05 3600 0,432
RNA2208LL/3AS 80 48 22,7 0 28,4 55 9,8 3100 0,53
RNA2208XLL/3AS 80 48 22,7 0 28,4 55 32 3100 0,53
RNAB208 80 50 19,8 58 39,5 69,5 9,66 3000 4000 0,42
RNA2209LL/3AS 85 52 22,7 0 29,3 58,5 10,4 2900 0,545
RNA2210LL/3AS 90 58 22,7 0 31 66 11,4 2600 0,563
RNA2210XLL/3AS 90 58 22,7 0 31 66 36 2600 0,563

71 With You
 rs

NA22 -- LL

Cam followers stud type truck rollers

Part numbers Dimensions (mm) Basic load rating Track load capacity Limiting Mass (kg)
(kN) (kN) speeds
D d B C e F rs dynamic static spherical cylindrical (tr/min)
Cr Cor outer ring outer ring
NA22/6LL/3AS 19 6 12 11,8 16 10 0,3 4,55 4,25 1,38 10000 0,023
NA22/6XLL/3AS 19 6 12 11,8 16 10 0,3 4,55 4,25 4,4 10000 0,023
NA22/8LL/3AS 24 8 12 11,8 18 12 0,3 5,15 5,25 1,9 10000 0,035
NA22/8XLL/3AS 24 8 12 11,8 18 12 0,3 5,15 5,25 5,5 10000 0,035
NA2200LL/3AS 30 10 14 13,8 20 14 0,3 7,55 9 2,62 10000 0,06
NA2200XLL/3AS 30 10 14 13,8 20 14 0,3 7,55 9 7,55 10000 0,06
NA2201LL/3AS 32 12 14 13,8 22 16 0,3 8,1 10,3 2,86 9500 0,067
NA2201XLL/3AS 32 12 14 13,8 22 16 0,3 8,1 10,3 8,05 9500 0,067
NA2202LL/3AS 35 15 14 13,8 26 20 0,3 9,85 14,1 3,2 7500 0,075
NA2203LL/3AS 40 17 16 15,8 28 22 0,3 10,4 15,6 3,85 7000 0,113
NA2203XLL/3AS 40 17 16 15,8 28 22 0,3 10,4 15,6 10,9 7000 0,113
NA2204LL/3AS 47 20 18 17,8 33 25 0,3 16,9 22,9 4,7 6000 0,176
NA2204XLL/3AS 47 20 18 17,8 33 25 0,3 16,9 22,9 14,8 6000 0,176
NA2205LL/3AS 52 25 18 17,8 38 30 0,3 17,9 25,9 5,55 5000 0,209
NA2206XLL/3AS 62 30 20 19,8 43 35 0,3 21,4 34,5 22,2 4300 0,322
NA2206LL/3AS 62 30 20 19,8 43 35 0,3 21,4 34,5 6,95 4300 0,322
NA2207LL/3AS 72 35 23 22,7 50 42 0,6 26,3 47,5 8,05 3600 0,506
NA2208LL/3AS 80 40 23 22,7 57 48 0,6 28,4 55 9,8 3100 0,623
NA2210LL/3AS 90 50 23 22,7 68 58 0,6 31 66 11,4 2600 0,682

With You 72
 B B
C C

øD ød øF øe øD ød øF øe

NATR
NATR NATR
NATR --
-- LL
LL NATV
NATV NATV --
NATV LL
-- LL NUTR2
NUTR2 NUTW2
NUTW2
(with cage)
(avec cage) (with
(avec cage,
étanchéité (full(sans
complement)
cage) (full
(avec complement,
étanchéité NUTR3
NUTR3
sealed)
et cage) sealed)
sans cage)

Roller followers
Part numbers Dimensions (mm) Basic load rating Track load capacity Limiting speeds Mass (kg)
(kN) (kN) (tr/min)
D d B C e F dynamic static spherical cylindrical grease oil
Cr Cor outer ring outer ring
NATR5 16 5 12 11 12 8 4,05 4,2 1,08 19000 25000 0,018
NATR5X 16 5 12 11 12 8 4,05 4,2 3,4 10000 25000 0,018
NATR5LL/3AS 16 5 12 11 12 8 4,05 4,2 1,08 10000 0,018
NATR5XLL/3AS 16 5 12 11 12 8 4,05 4,2 3,4 10000 0,018
NATV5/3AS 16 5 12 11 12 8 6,5 9,35 1,08 13000 0,02
NATV5X/3AS 16 5 12 11 12 8 6,5 9,35 3,4 13000 0,02
NATV5LL/3AS 16 5 12 11 12 8 6,5 9,35 1,08 10000 0,02
NATV5XLL/3AS 16 5 12 11 12 8 6,5 9,35 3,4 10000 0,02
NATR6 19 6 12 11 14 10 4,75 5,4 1,38 10000 20000 0,025
NATR6X 19 6 12 11 14 10 4,75 5,4 4,05 10000 20000 0,025
NATR6LL/3AS 19 6 12 11 14 10 4,75 5,4 1,38 10000 0,025
NATR6XLL/3AS 19 6 12 11 14 10 4,75 5,4 4,05 10000 0,025
NATV6/3AS 19 6 12 11 14 10 7,45 11,7 1,38 10000 0,027
NATV6X/3AS 19 6 12 11 14 10 7,45 11,7 4,05 10000 0,027
NATV6LL/3AS 19 6 12 11 14 10 7,45 11,7 1,38 10000 0,027
NATV6XLL/3AS 19 6 12 11 14 10 7,45 11,7 4,05 10000 0,027
NATR8 24 8 15 14 19 12 6,9 7,7 1,9 10000 16000 0,042
NATR8X 24 8 15 14 19 12 6,9 7,7 6,65 10000 16000 0,042
NATR8LL/3AS 24 8 15 14 19 12 6,9 7,7 1,9 10000 0,042
NATR8XLL/3AS 24 8 15 14 19 12 6,9 7,7 6,65 10000 0,042
NATV8/3AS 24 8 15 14 19 12 10,7 16,2 1,9 8500 0,044
NATV8X/3AS 24 8 15 14 19 12 10,7 16,2 6,65 8500 0,044
NATV8LL/3AS 24 8 15 14 19 12 10,7 16,2 1,9 8500 0,044
NATV8LL/5K 24 8 15 14 19 12 10,7 16,2 1,9 8500 0,044
NATV8LL/LP03 24 8 15 14 19 12 10,7 16,2 1,9 2500 0,044
NATV8XLL/3AS 24 8 15 14 19 12 10,7 16,2 6,65 8500 0,044
NACV16LL/3AS 25,4 7,938 17,462 15,875 19,5 14 11,7 18,9 2,06 7,4 7100 9200 0,059
NATR10 30 10 15 14 23 15 7,85 9,65 2,62 10000 13000 0,061
NATR10X 30 10 15 14 23 15 7,85 9,65 7,7 10000 13000 0,061
NATR10LL/3AS 30 10 15 14 23 15 7,85 9,65 2,62 10000 0,061
NATR10LL/LP03 30 10 15 14 23 15 7,85 9,65 2,62 2000 0,061
NATR10XLL/3AS 30 10 15 14 23 15 7,85 9,65 7,7 10000 0,061
NATV10/3AS 30 10 15 14 23 15 12 20,3 2,62 6500 0,065
NATV10X/3AS 30 10 15 14 23 15 12 20,3 7,7 6500 0,065
NATV10LL/3AS 30 10 15 14 23 15 12 20,3 2,62 6500 0,065
NATV10XLL/3AS 30 10 15 14 23 15 12 20,3 7,7 6500 0,065
NATR12CT 32 12 15 14 25 17 8,05 10,3 2,86 9000 12000 0,069
NATR12XCT 32 12 15 14 25 17 8,05 10,3 8,2 9000 12000 0,069
NATR12CLLT/3AS 32 12 15 14 23 15 8,05 10,3 2,86 9000 0,069
NATR12XCLLT/3AS 32 12 15 14 25 17 8,85 11,7 8,2 9000 0,069
NATV12/3AS 32 12 15 14 25 17 13 23 2,86 6000 0,074
NATV12X/3AS 32 12 15 14 25 17 13 23 8,2 6000 0,074
NATV12LL/3AS 32 12 15 14 25 17 13 23 2,86 6000 0,074
NATV12LL/5S 32 12 15 14 25 17 13 23 2,86 6000 0,074
NATV12LL/5K 32 12 15 14 25 17 13 23 2,86 6000 0,074
NATV12XLL/3AS 32 12 15 14 25 17 13 23 8,2 6000 0,074
NATR15 35 15 19 18 27 20 13,3 20,8 3,2 7500 10000 0,098
NATR15X 35 15 19 18 27 20 13,3 20,8 11,9 7500 10000 0,098
NATR15LL/3AS 35 15 19 18 27 20 13,3 20,8 3,2 7500 0,098
NATR15XLL/3AS 35 15 19 18 27 20 13,3 20,8 11,9 7500 0,098
NATV15/3AS 35 15 19 18 27 20 18,4 38 3,2 5000 0,102
NATV15/5S 35 15 19 18 27 20 18,4 38 3,2 5000 0,102
NATV15X/3AS 35 15 19 18 27 20 18,4 38 11,9 5000 0,102
NATV15LL/3AS 35 15 19 18 27 20 18,4 38 3,2 5000 0,102
NATV15LL/5S 35 15 19 18 27 20 18,4 38 3,2 5000 0,102
NATV15LL/5K 35 15 19 18 27 20 18,4 38 3,2 5000 0,102
NATV15XLL/3AS 35 15 19 18 27 20 18,4 38 11,9 5000 0,102
NUTR202/3AS 35 15 19 18 20 19 22,3 25,7 3,2 5500 0,1
NUTR202X/3AS 35 15 19 18 20 19 22,3 25,7 11,9 5500 0,1
NATR17 40 17 21 20 32 22 14 22,8 3,85 7000 9000 0,14
NATR17X 40 17 21 20 32 22 14 22,8 14,5 7000 9000 0,14

73 With You
 B B
C C

øD ød øF øe øD ød øF øe

NATR
NATR NATR
NATR --
-- LL
LL NATV
NATV NATV --
NATV LL
-- LL NUTR2
NUTR2 NUTW2
NUTW2
(with cage)
(avec cage) (with
(avec cage,
étanchéité (full(sans
complement)
cage) (full
(avec complement,
étanchéité NUTR3
NUTR3
sealed)
et cage) sealed)
sans cage)

Roller followers
Part numbers Dimensions (mm) Basic load rating Track load capacity Limiting speeds Mass (kg)
(kN) (kN) (tr/min)
D d B C e F dynamic static spherical cylindrical grease oil
Cr Cor outer ring outer ring
NATR17LL/3AS 40 17 21 20 32 22 14 22,8 3,85 7000 0,14
NATR17XLL/3AS 40 17 21 20 32 22 14 22,8 14,5 7000 0,14
NATV17/3AS 40 17 21 20 32 22 19,4 42 3,85 4500 0,145
NATV17/5S 40 17 21 20 32 22 19,4 42 3,85 4500 0,145
NATV17X/3AS 40 17 21 20 32 22 19,4 42 14,5 4500 0,145
NATV17LL/3AS 40 17 21 20 32 22 19,4 42 3,85 4500 0,145
NATV17LL/5S 40 17 21 20 32 22 19,4 42 3,85 4500 0,145
NATV17XLL/3AS 40 17 21 20 32 22 19,4 42 14,5 4500 0,145
NUTR203/3AS 40 17 21 20 22 21,5 24,1 29,1 3,85 4700 0,147
NUTR203/5S 40 17 21 20 22 21,5 24,1 29,1 3,85 4700 0,147
NUTR203X/3AS 40 17 21 20 22 21,5 24,1 29,1 14,5 4700 0,147
NUTR302/3AS 42 15 19 18 20 19 22,3 25,7 4,1 5500 0,16
NUTR302X/3AS 42 15 19 18 20 19 22,3 25,7 14,3 5500 0,16
NATR20 47 20 25 24 37 25 20,7 33,5 4,7 6000 8000 0,246
NATR20X 47 20 25 24 37 25 20,7 33,5 21 6000 8000 0,246
NATR20LL/3AS 47 20 25 24 37 25 20,7 33,5 4,7 6000 0,246
NATR20XLL/3AS 47 20 25 24 37 25 20,7 33,5 21 6000 0,246
NATV20/3AS 47 20 25 24 37 25 28,8 61 4,7 4000 0,254
NATV20X/3AS 47 20 25 24 37 25 28,8 61 21 4000 0,254
NATV20LL/3AS 47 20 25 24 37 25 28,8 61 4,7 4000 0,254
NATV20XLL/3AS 47 20 25 24 37 25 28,8 61 21 4000 0,254
NUTR204/3AS 47 20 25 24 27 25,5 38,5 48 4,7 4000 0,245
NUTR204X/3AS 47 20 25 24 27 25,5 38,5 48 21 4000 0,245
NUTR303/3AS 47 17 21 20 22 21,5 24,1 29,1 4,7 4700 0,222
NUTR303X/3AS 47 17 21 20 22 21,5 24,1 29,1 17 4700 0,222
NUTW204X/3AS 47 20 29 28 27 25,5 40,5 51,5 4,7 25,1 4000 0,28
NATR25 52 25 25 24 42 30 22,8 40,5 5,5 5000 6500 0,275
NATR25X 52 25 25 24 42 30 22,8 40,5 23,3 5000 6500 0,275
NATR25LL/3AS 52 25 25 24 42 30 22,8 40,5 5,5 5000 0,275
NATR25XLL/3AS 52 25 25 24 42 30 22,8 40,5 23,3 5000 0,275
NATV25/3AS 52 25 25 24 42 30 31,5 73,5 5,5 3300 0,285
NATV25X/3AS 52 25 25 24 42 30 31,5 73,5 23,3 3300 0,285
NATV25LL/3AS 52 25 25 24 42 30 31,5 73,5 5,5 3300 0,285
NATV25LL/5S 52 25 25 24 42 30 31,5 73,5 5,5 3300 0,285
NATV25XLL/3AS 52 25 25 24 42 30 31,5 73,5 23,3 3300 0,285
NUTR205/3AS 52 25 25 24 31 30 42,5 57,5 5,55 3300 0,281
NUTR205X/3AS 52 25 25 24 31 30 42,5 57,5 23,3 3300 0,281

With You 74
Roller followers
Part numbers Dimensions (mm) Basic load rating Track load capacity Limiting speeds Mass (kg)
(kN) (kN) (tr/min)
D d B C e F dynamic static spherical cylindrical grease oil
Cr Cor outer ring outer ring
NUTR304/3AS 52 20 25 24 27 25,5 38,5 48 5,55 4000 0,321
NUTR304X/3AS 52 20 25 24 27 25,5 38,5 48 23,3 4000 0,321
NATR30 62 30 29 28 51 38 36 66 6,95 4000 5500 0,47
NATR30X 62 30 29 28 51 38 36 66 33 4000 5500 0,47
NATR30LL/3AS 62 30 29 28 51 38 36 66 6,95 4000 0,47
NATR30XLL/3AS 62 30 29 28 51 38 36 66 33 4000 0,47
NATV30/3AS 62 30 29 28 51 38 47,5 115 6,95 2600 0,481
NATV30X/3AS 62 30 29 28 51 38 47,5 115 33 2600 0,481
NATV30LL/3AS 62 30 29 28 51 38 47,5 115 6,95 2600 0,481
NATV30XLL/3AS 62 30 29 28 51 38 47,5 115 33 2600 0,481
NUTR206/3AS 62 30 29 28 38 35 56,5 72,5 6,95 2900 0,466
NUTR206X/3AS 62 30 29 28 38 35 56,5 72,5 33 2900 0,466
NUTR305/3AS 62 25 25 24 31 30 42,5 57,5 6,95 3300 0,45
NUTR305X/3AS 62 25 25 24 31 30 42,5 57,5 27,8 3300 0,45
NATR35 72 35 29 28 58 44,5 39 77 8,05 3300 4500 0,635
NATR35X 72 35 29 28 58 44,5 39 77 37 3300 4500 0,635
NATR35LL/3AS 72 35 29 28 58 44,5 39 77 8,05 3300 0,635
NATR35XLL/3AS 72 35 29 28 58 44,5 39 77 37 3300 0,635
NATV35/3AS 72 35 29 28 58 44,5 52 134 8,05 2200 0,647
NATV35X/3AS 72 35 29 28 58 44,5 52 134 37 2200 0,647
NATV35LL/3AS 72 35 29 28 58 44,5 52 134 8,05 2200 0,647
NATV35XLL/3AS 72 35 29 28 58 44,5 52 134 37 2200 0,647
NUTR207/3AS 72 35 29 28 44 41,5 62 85,5 8,05 2400 0,63
NUTR207X/3AS 72 35 29 28 44 41,5 62 85,5 37 2400 0,63
NUTR306/3AS 72 30 29 28 38 35 56,5 72,5 8,05 2900 0,697
NUTR306X/3AS 72 30 29 28 38 35 56,5 72,5 38,5 2900 0,697
NACV48X/3AS 76,2 25,4 46,038 44,45 53 36,85 76,5 177 9,15 64 2700 1,39
NATR40 80 40 32 30 66 50 49,5 92,5 9,8 3000 4000 0,875
NATR40X 80 40 32 30 66 50 49,5 92,5 44,5 3000 4000 0,875
NATR40LL/3AS 80 40 32 30 66 50 49,5 92,5 9,8 3000 0,875
NATR40XLL/3AS 80 40 32 30 66 50 49,5 92,5 44,5 3000 0,875
NATV40/3AS 80 40 32 30 66 50 68,5 171 9,8 2000 0,89
NATV40X/3AS 80 40 32 30 66 50 68,5 171 44,5 2000 0,89
NATV40LL/3AS 80 40 32 30 66 50 68,5 171 9,8 2000 0,89
NATV40XLL/3AS 80 40 32 30 66 50 68,5 171 44,5 2000 0,89
NUTR208/3AS 80 40 32 30 51 47,5 87 125 9,8 2100 0,817
NUTR208X/3AS 80 40 32 30 51 47,5 87 125 44,5 2100 0,817
NUTR307/3AS 80 35 29 28 44 41,5 62 85,5 9,8 2400 0,84
NUTR307X/3AS 80 35 29 28 44 41,5 62 85,5 41 2400 0,84
NATR45 85 45 32 30 71 55 51,5 100 10,4 2700 3600 0,91
NATR45LL/3AS 85 45 32 30 71 55 51,5 100 10,4 2700 0,91
NATR45XLL/3AS 85 45 32 30 71 55 51,5 100 47 2700 0,91
NUTR209/3AS 85 45 32 30 55 52,5 87 125 11,4 1900 0,883
NUTR209X/3AS 85 45 32 30 55 52,5 87 125 50 1900 0,883
NATR50 90 50 32 30 76 60 53 108 11,4 2500 3300 0,96
NATR50LL/3AS 90 50 32 30 76 60 53 108 11,4 2500 0,96
NATR50XLL/3AS 90 50 32 30 76 60 53 108 50 2500 0,96
NATV50/3AS 90 50 32 30 76 60 76 205 11,4 1600 0,99
NATV50X/3AS 90 50 32 30 76 60 76 205 50 1600 0,99
NATV50LL/3AS 90 50 32 30 76 60 76 205 11,4 1600 0,99
NATV50XLL/3AS 90 50 32 30 76 60 76 205 50 1600 0,99
NUTR210/3AS 90 50 32 30 60 57 92 137 10,4 1800 0,95
NUTR210X/3AS 90 50 32 30 60 57 92 137 47 1800 0,95
NUTR308/3AS 90 40 32 30 51 47,5 96,5 150 11,4 2100 1,13
NUTR308X/3AS 90 40 32 30 51 47,5 96,5 150 50 2100 1,13
NUTR309/3AS 100 45 32 30 55 52,5 92 137 13 1900 1,4
NUTR309X/3AS 100 45 32 30 55 52,5 92 137 55,5 1900 1,4
NUTR310/3AS 110 50 32 30 60 57 96,5 150 14,7 1800 1,69
NUTR310X/3AS 110 50 32 30 60 57 96,5 150 61 1800 1,69

75 With You
 øDW

øDC øDC1

AXK
AXK
Thrust needle
Cageroller and cage assembly
à aiguilles

Thrust needle roller bearings

Part numbers Dimensions (mm) Basic load rating Limiting speeds Mass Bearing numbers
(kN) (tr/min) (kg)
Dc1 Dc Dw dynamic static grease oil
washer inner ring outer ring
E11 a13 0 / -0,1 Cr Cor
AXK1100 10 24 2 9,15 25,3 3500 14000 0,0028 AS1100 WS81100 GS81100
AXK1101 12 26 2 9,85 28,9 3300 13000 0,003 AS1101 WS81101 GS81101
AXK1102 15 28 2 11,3 36 2800 11000 0,0035 AS1102 WS81102 GS81102
AXK1103 17 30 2 11,9 39,5 2500 10000 0,004 AS1103 WS81103 GS81103
AXK1104 20 35 2 13,2 46,5 2100 8500 0,005 AS1104 WS81104 GS81104
AXK1105 25 42 2 14,6 58 1800 7000 0,007 AS1105 WS81105 GS81105
AXK1106 30 47 2 16,3 69,5 1500 6000 0,008 AS1106 WS81106 GS81106
AXK1107 35 52 2 17,8 81,5 1400 5500 0,01 AS1107 WS81107 GS81107
AXK1108 40 60 3 27,4 110 1200 4700 0,0185 AS1108 WS81108 GS81108
AXK1109 45 65 3 29,8 128 1100 4300 0,0205 AS1109 WS81109 GS81109
AXK1110 50 70 3 31,5 143 1000 3900 0,0235 AS1110 WS81110 GS81110
AXK1111 55 78 3 38 186 900 3500 0,038 AS1111 WS81111 GS81111
AXK1112 60 85 3 44,5 234 800 3200 0,039 AS1112 WS81112 GS81112
AXK1113 65 90 3 46,5 254 750 3000 0,04 AS1113 WS81113 GS81113
AXK1114 70 95 4 53,5 253 750 2900 0,06 AS1114 WS81114 GS81114
AXK1115 75 100 4 55 266 700 2700 0,061 AS1115 WS81115 GS81115
AXK1116 80 105 4 56,5 279 650 2600 0,063 AS1116 WS81116 GS81116
AXK1117 85 110 4 57,5 291 600 2400 0,0668 AS1117 WS81117 GS81117
AXK1118 90 120 4 70,5 390 600 2300 0,086 AS1118 WS81118 GS81118
AXK1120 100 135 4 90 550 500 2000 0,112 AS1120 WS81120 GS81120
AXK1122 120 155 4 99 650 430 1700 0,131 AS1124 WS81124 GS81124
AXK1124 110 145 4 93,5 590 480 1900 0,122 AS1122 WS81122 GS81122
AXK1126 130 170 5 140 900 400 1600 0,205 AS1126 WS81126 GS81126
AXK1128 140 180 5 145 960 380 1500 0,219 AS1128 WS81128 GS81128
AXK1130 150 190 5 149 1020 350 1400 0,232 AS1130 WS81130 GS81130
AXK1132 160 200 5 154 1070 330 1300 0,246 AS1132 WS81132 GS81132

Thrust needle roller bearings

S Part numbers Dimensions (mm) Mass
(kg)
Dp Dp1
e13
S
E12
AS1100 24 10 1 0,003
AS1101 26 12 1 0,0033
AS1102 28 15 1 0,0035
øDp øDp1 AS1103 30 17 1 0,0038
AS1104 35 20 1 0,0051
AS1105 42 25 1 0,007
AS1106 47 30 1 0,008
AS1107 52 35 1 0,0091
AS1108 60 40 1 0,0123
AS1109 65 45 1 0,0136
AS bearing
Rondelle ring AS
dʼappui AS1110 70 50 1 0,0148
(washer)
(rondelle de butée) AS1111 78 55 1 0,0189
AS1112 85 60 1 0,0223
AS1113 90 65 1 0,0239
AS1114 95 70 1 0,0254
AS1115 100 75 1 0,027
AS1116 105 80 1 0,0284
AS1117 110 85 1 0,0301
AS1118 120 90 1 0,0388
AS1120 135 100 1 0,0505
AS1122 145 110 1 0,0549
AS1124 155 120 1 0,0592
AS1126 170 130 1 0,074
AS1128 180 140 1 0,079
AS1130 190 150 1 0,084
AS1132 200 160 1 0,089

With You 76
 B B
rs

rs

ød1 ød φD φ D1

WS bearing
Rondelle ringWS
dʼappui Rondelle dʼappui
GS bearing ring GS
(inner ring) (outerextérieure)
(bague ring)
(bague intérieure)

Thrust needle roller bearings Thrust needle roller bearings

Part numbers Dimensions (mm) Mass Part numbers Dimensions (mm) Mass
(kg) (kg)
d d1 B D D1 B
rs rs
-0,2 / -0,5 h11 +0,5 / +0,2 h11
WS81100 10 24 2,75 0,3 0,008 GS81101 26 12 2,75 0,3 0,009
WS81101 12 26 2,75 0,3 0,009 GS81102 28 16 2,75 0,3 0,01
WS81101 12 26 2,75 0,3 0,009 GS81103 30 18 2,75 0,3 0,011
WS81102 15 28 2,75 0,3 0,01 GS81104 35 21 2,75 0,3 0,014
WS81103 17 30 2,75 0,3 0,011 GS81105 42 26 3 0,6 0,021
WS81104 20 35 2,75 0,3 0,014 GS81106 47 32 3 0,6 0,025
WS81105 25 42 3 0,6 0,021 GS81107 52 37 3,5 0,6 0,033
WS81106 30 47 3 0,6 0,021 GS81206 52 32 4,25 0,6 0,045
WS89306 30 60 6,25 1 0,1 GS81108 60 42 3,5 0,6 0,044
WS81206 30 52 4,25 0,6 0,045 GS89306 60 32 6,25 1 0,1
WS81107 35 52 3,5 0,6 0,033 GS81207 62 37 5,25 1 0,085
WS89307 35 68 7 1 0,15 GS81109 65 47 4 0,6 0,055
WS81207 35 62 5,25 1 0,085 GS89307 68 37 7 1 0,15
WS81108 40 60 3,5 0,6 0,044 GS81208 68 42 5 1 0,09
WS87408 40 90 8,25 1,1 0,33 GS81110 70 52 4 0,6 0,06
WS89308 40 78 7,5 1 0,21 GS81209 73 47 5,5 1 0,105
WS81208 40 68 5 1 0,09 GS81111 78 57 5 0,6 0,095
WS81109 45 65 4 0,6 0,055 GS89308 78 42 7,5 1 0,21
WS89309 45 85 8,25 1 0,27 GS81210 78 52 6,5 1 0,14
WS81209 45 73 5,5 1 0,105 GS81112 85 62 4,75 1 0,101
WS81110 50 70 4 0,6 0,06 GS89309 85 47 8,25 1 0,27
WS87410 50 110 9,5 1,5 0,56 GS81113 90 67 5,25 1 0,125
WS89310 50 95 9,5 1,1 0,38 GS81211 90 57 7 1 0,21
WS81210 50 78 6,5 1 0,14 GS81114 95 72 5,25 1 0,135
WS81111 55 78 5 0,6 0,095 GS89310 95 52 9,5 1,1 0,38
WS89311 55 105 10,5 1,1 0,52 GS81212 95 62 7,5 1 0,23
WS81211 55 90 7 1 0,21 GS81115 100 77 5,75 1 0,155
WS81112 60 85 4,75 1 0,101 GS81213 100 67 8 1 0,28
WS89312 60 110 10,5 1,1 0,55 GS81116 105 82 5,75 1 0,165
WS81212 60 95 7,5 1 0,23 GS89311 105 57 10,5 1,1 0,52
WS81113 65 90 5,25 1 0,125 GS81214 105 72 8 1 0,295
WS87413 65 140 12 2 1,14 GS81117 110 87 5,75 1 0,175
WS89313 65 115 10,5 1,1 0,58 GS87410 110 52 9,5 1,5 0,56
WS81213 65 100 8 1 0,28 GS89312 110 62 10,5 1,1 0,55
WS81114 70 95 5,25 1 0,135 GS81215 110 77 8 1 0,31
WS89314 70 125 12 1,1 0,8 GS89313 115 67 10,5 1,1 0,58
WS81214 70 105 8 1 0,295 GS81216 115 82 8,5 1 0,35
WS81115 75 100 5,75 1 0,155 GS81118 120 92 6,5 1 0,25
WS89315 75 135 12,5 1,5 0,97 GS89314 125 72 12 1,1 0,8
WS81215 75 110 8 1 0,31 GS81217 125 88 9,5 1 0,49
WS81116 80 105 5,75 1 0,165 GS81120 135 102 7 1 0,35
WS89316 80 140 12,5 1,5 1,02 GS89315 135 77 12,5 1,5 0,97
WS81216 80 115 8,5 1 0,35 GS81218 135 93 10,5 1,1 0,64
WS81117 85 110 5,75 1 0,175 GS89316 140 82 12,5 1,5 1,02
WS89317 85 150 13,5 1,5 1,28 GS81122 145 112 7 1 0,385
WS81217 85 125 9,5 1 0,49 GS89317 150 88 13,5 1,5 1,28
WS81118 90 120 6,5 1 0,25 GS81220 150 103 11,5 1,1 0,81
WS89318 90 155 13,5 1,5 1,33 GS81124 155 122 7 1 0,415
WS81218 90 135 10,5 1,1 0,64 GS89318 155 93 13,5 1,5 1,33
WS81120 100 135 7 1 0,35 GS81126 170 132 9 1 0,663
WS89320 100 170 14,5 1,5 1,69 GS89320 170 103 14,5 1,5 1,69
WS81220 100 150 11,5 1,1 0,81 GS81128 180 142 9,5 1 0,75
WS81122 110 145 7 1 0,385 GS81130 190 152 9,5 1 0,8
WS89322 110 190 16,5 2 2,44 GS89322 190 113 16,5 2 2,44
WS81124 120 155 7 1 0,415 GS81226 190 133 13 1,5 1,53
WS81126 130 170 9 1 0,663 GS81132 200 162 9,5 1 0,84
WS81226 130 187 13 1,5 1,53
WS81128 140 178 9,5 1 0,75
WS81130 150 188 9,5 1 0,8
WS81132 160 198 9,5 1 0,84

77 With You
 øDW

øDc øDc1

K811,
K811, K812
K812
Cage
Thrust needle à rouleaux
roller and cage assembly

Thrust needle roller bearings

Part numbers Dimensions (mm) Mass
(kg)
Dc1 Dc Dw
E11 a13 0 / -0,01
K81102T2 15 28 3,5 0,006
K81103T2 17 30 3,5 0,008
K81104T2 20 35 4,5 0,012
K81105L1 25 42 5 0,023
K81105T2 25 42 5 0,021
K81106T2 30 47 5 0,022
K89306 30 60 5,5 0,046
K81107T2 35 52 5 0,024
K89307 35 68 6 0,064
K81108T2 40 60 6 0,035
K89308 40 78 7 0,1
K81109T2 45 65 6 0,04
K89309 45 85 7,5 0,14
K81110T2 50 70 6 0,045
K87410 50 110 8 0,26
K89310 50 95 8 0,18
K81111T2 55 78 6 0,06
K89311 55 105 9 0,24
K81112 60 85 7,5 0,11
K81112L1 60 85 75 0,104
K81112T2 60 85 7,5 0,083
K89312 60 110 9 0,25
K81113T2 65 90 7,5 0,09
K89313 65 115 9 0,26
K81114T2 70 95 7,5 0,097
K87414 70 150 11 0,65
K89314 70 125 10 0,34
K81115T2 75 100 7,5 0,115
K89315 75 135 11 0,47
K81116T2 80 105 7,5 0,119
K89316 80 140 11 0,49
K81117T2 85 110 7,5 0,125
K89317 85 150 12 0,59
K81118T2 90 120 9 0,17
K89318 90 155 12 0,62
K81120T2 100 135 11 0,3
K89320 100 170 13 0,81
K81122T2 110 145 11 0,325
K89322L1 110 183 15 1,15
K81124T2 120 155 11 0,34
K81126 130 170 12 0,415
K81128 140 180 12 0,45
K81130 150 190 12 0,47
K81132 160 200 12 0,5

With You 78
 T
rs

rs

øD øD1 ød ød1

811
811 893
893 874
874
812
812 bearing
bearing

Thrust cylindrical roller bearing

Part numbers Dimensions (mm) Basic load rating Limiting speeds Mass Bearing numbers Abutment dimensions
(kN) (tr/min) (kg) (mm)
d D d1 D1 T rs dynamic static grease oil cage inner ring outer ring da min Db max ras max
-0,2 +0,5 Cr Cor
-0,5 +0,2
81102T2 15 28 28 16 9 0,3 12,2 26,8 2800 11000 0,026 K81102T2 WS81102 GS81102 25 18 0,3
81103T2 17 30 30 18 9 0,3 12,7 29 2500 10000 0,03 K81103T2 WS81103 GS81103 27 20 0,3
81104T2 20 35 35 21 10 0,3 20,2 46,5 2100 8500 0,04 K81104T2 WS81104 GS81104 32 23 0,3
81105T2 25 42 42 26 11 0,6 27,3 68 1800 7000 0,06 K81105T2 WS81105 GS81105 39 28 0,6
81106T2 30 47 47 32 11 0,6 27,8 72,5 1500 6000 0,07 K81106T2 WS81106 GS81106 44 33 0,6
81206 30 52 52 32 16 0,6 53,5 129 1500 6000 0,14 K81206 WS81206 GS81206 48 33 0,6
81206T2 30 52 52 32 16 0,6 53 129 1500 6000 0,14 K81206T2 WS81206 GS81206 48 33 0,6
81107T2 35 52 52 37 12 0,6 31 87 1400 5500 0,09 K81107T2 WS81107 GS81107 49 38 0,6
81207T2 35 62 62 37 18 1 54,5 139 1200 4900 0,235 K81207T2 WS81207 GS81207 56 41 1
81108T2 40 60 60 42 13 0,6 43 121 1200 4800 0,135 K81108T2 WS81108 GS81108 56 44 0,6
81208T2 40 68 68 42 19 1 74,5 190 1100 4400 0,265 K81208T2 WS81208 GS81208 63 44 1
89308 40 78 78 42 22 1 85 277 1000 4000 0,52 K89308 WS89308 GS89308 74 46 1
81109T2 45 65 65 47 14 0,6 45,5 135 1100 4400 0,15 K81109T2 WS81109 GS81109 61 49 0,6
81209T2 45 73 73 47 20 1 82 222 1000 4100 0,31 K81209T2 WS81209 GS81209 68 49 1
89309 45 85 85 47 24 1 102 345 900 3600 0,67 K89309 WS89309 GS89309 81 51 1
81110T2 50 70 70 52 14 0,6 48,5 150 1000 4000 0,165 K81110T2 WS81110 GS81110 66 54 0,6
81210T2 50 78 78 52 22 1 85 238 950 3800 0,385 K81210T2 WS81210 GS81210 73 54 1
89310 50 95 95 52 27 1,1 125 445 800 3200 0,94 K89310 WS89310 GS89310 90 58 1
81111T2 55 78 78 57 16 0,6 62,5 215 900 3600 0,25 K81111T2 WS81111 GS81111 75 58 0,6
81211T2 55 90 90 57 25 1 121 340 830 3300 0,61 K81211T2 WS81211 GS81211 83 61 1
89311 55 105 105 57 30 1,1 158 570 730 2900 1,27 K89311 WS89311 GS89311 100 64 1
81112T2 60 85 85 62 17 1 69 215 830 3300 0,285 K81112T2 WS81112 GS81112 80 65 1
81212T2 60 95 95 62 26 1 126 365 780 3100 0,66 K81212T2 WS81212 GS81212 88 66 1
89312 60 110 110 62 30 1,1 162 600 680 2700 1,35 K89312 WS89312 GS89312 105 69 1
81113T2 65 90 90 67 18 1 73 236 780 3100 0,34 K81113T2 WS81113 GS81113 85 70 1
81213T2 65 100 100 67 27 1 130 385 730 2900 0,775 K81213T2 WS81213 GS81213 93 71 1
89313 65 115 115 67 30 1,1 167 635 650 2600 1,43 K89313 WS89313 GS89313 110 74 1
81114T2 70 95 95 72 18 1 76,5 257 730 2900 0,365 K81114T2 WS81114 GS81114 90 74 1
81214T2 70 105 105 72 27 1 134 410 680 2700 0,815 K81214T2 WS81214 GS81214 98 76 1
89314 70 125 125 72 34 1,1 205 790 600 2400 1,93 K89314 WS89314 GS89314 120 80 1
81115T2 75 100 100 77 19 1 78 268 680 2700 0,425 K81115T2 WS81115 GS81115 95 80 1
81215T2 75 110 110 77 27 1 138 435 650 2600 0,86 K81215T2 WS81215 GS81215 103 81 1
89315 75 135 135 77 36 1,5 239 920 550 2200 2,41 K89315 WS89315 GS89315 129 85 1,5
81116T2 80 105 105 82 19 1 79,5 279 650 2600 0,445 K81116T2 WS81116 GS81116 100 85 1
81216 80 115 115 82 28 1 142 460 630 2500 0,95 K81216 WS81216 GS81216 106 86 1
89316 80 140 140 82 36 1,5 246 970 530 2100 2,53 K89316 WS89316 GS89316 134 90 1,5
81216T2 80 115 115 82 28 1 143 460 630 2500 0,95 K81216T2 WS81216 GS81216 106 86 1
81117T2 85 110 110 87 19 1 83 300 630 2500 0,475 K81117T2 WS81117 GS81117 105 89 1
81217L1 85 125 125 88 31 1 169 550 580 2300 1,28 K81217L1 WS81217 GS81271 116 92 1
89317 85 150 150 88 39 1,5 281 1100 500 2000 3,14 K89317 WS89317 GS89317 144 96 1,5
81118T2 90 120 120 92 22 1 112 395 580 2300 0,67 K81118T2 WS81118 GS81118 114 95 1
81218J 90 135 135 93 35 1,1 213 680 530 2100 1,82 K81218J WS81218 GS81218 126 91 1
81120T2 100 135 135 102 25 1 158 555 500 2000 1 K81120T2 WS81120 GS81120 128 106 1
81220 100 150 150 103 38 1,1 243 795 480 1900 2,24 K81220 WS81220 GS81220 139 109 1
89320 100 170 170 103 42 1,5 335 1370 430 1700 4,19 K89320 WS89320 GS89320 163 110 1,5
89320L1 100 170 170 103 42 1,5 335 1370 430 1700 4,19 K89320 WS89320 GS89320 163 110 1,5
81122T2 110 145 145 112 25 1 165 605 480 1900 1,1 K81122T2 WS81122 GS81122 138 116 1
81222 110 160 160 113 38 1,1 258 885 450 1800 2,45 K81222 WS81222 GS81222 149 119 1
81124T2 120 155 155 122 25 1 172 655 450 1800 1,17 K81124T2 WS81124 GS81124 148 126 1
81224 120 170 170 123 39 1,1 264 930 430 1700 2,69 K81224 WS81224 GS81224 159 129 1
89324L1 120 210 210 123 54 3,5 0 0 K89324 WS89324 GS89324 0 0 0
81126 130 170 170 132 30 1 197 755 400 1600 1,74 K81126 WS81126 GS81126 162 137 1
81226 130 190 187 133 45 1,5 360 1210 380 1500 4,2 K81226 WS81226 GS81224 178 140 1,5
81128 140 180 178 142 31 1 206 815 380 1500 1,95 K81128 WS81128 GS81128 172 147 1
81228 140 200 197 143 46 1,5 370 1280 250 1400 4,57 K81128 WS81226 GS81224 188 150 1,5
81130 150 190 188 152 31 1 214 870 350 1400 2,07 K81130 WS81130 GS81130 182 157 1
81230L1 150 215 153 212 50 1,5 0 0 0 K81230 WS81230 GS81230 0 0 0
81132 160 200 198 162 31 1 221 930 330 1300 2,19 K81132 WS81132 GS81132 192 167 1
81134 170 215 213 172 34 1,1 282 1160 310 1200 2,64 K81134 WS81134 GS81134 207 177 1
81136 180 225 183 222 34 1,1 293 1240 290 1100 3,06 K81136 WS81136 GS81136 217 227 1

79 With You
 NEEDLE ROLLER BEARINGS INTERCHANGE

Needle roller bearings with solid rings Needle roller and cage assemblies

NTN INA IKO SKF KOYO NADELLA NTN INA IKO SKF KOYO NADELLA
NK,NK..R NK TAF NK NQ,NK NK K K KT K RS, R, RP K
NK..T2 NK..-TV NK..-TN K..T2 K..-TV KTN K..TN
NK+1R, NK.. K..ZW K..-ZW KTW K..ZW WRS,WR K..ZW
NKI TRI/TAFI NKI NQI
R+1R metric KMJ V,VS, RV
NKS+IR NKIS NKIS KMJ..S
NK..T2+1R NKI..-TV NKI..TN NQI KJ..S
RNA48 RNA48 RNA48 RNA48 RNA1000 GK RFNU
NKS NKS TR NKS NQS NKS inch PCJ C
NKZ TR
RNA49,
RNA49 RNA49 RNA49 RNA49
RNA49..R
RNA49..L RNA49..-RSR RNA49..U RNA49..RS
metric
RNA49..LL RNA49..-2RSR RNA49..UU RNA49..2RS
RNA59 RNA59 RNA2000
RNA69,
RNA69 RNA69 RNA69 RNA69 RNA22000
RNA69..R
NA48 NA48 NA48 NA48 NA1000
NA49,NA49..R NA49 NA49 NA49 NA2000
Cage assembly for connecting rod
NA49..L NA49..-RSR NA49..U NA49..RS
NA49..LL NA49..-2RSR NA49..UU NA49..2RS
NTN INA IKO SKF KOYO NADELLA
NA59
NA69, NA69..R NA69 NA69 NA69 NA2200 KBK KBK KTV..EG R..P, UR..P
NA69 (double KV..S VP,VPS
NA69..-ZW metric
row) PK KZK KT..EG VS..P,VE
MR NCS BR GPK RFNU MB
inch
MR+MI NCS+PI BRI H

Needle roller bearings, separable type Drawn cup needle roller bearings

NTN INA IKO SKF KOYO NADELLA NTN INA IKO SKF KOYO NADELLA
RNAO RNAO RNAF RNA0 HK HK TLA…Z HK BTM HK
RNAO..T2 RNAO..-TV RNAF..N RNAO..TN HK..T2 HK..-TV BFNM HK..TN
RNAO..-ZW- HK..L HK..-RS HK..RS BTM..U HK..RS
RNAO..ZW RNAFW RNA0
ASR1 HK..LL HK..-2RS TLA..UU HK..2RS BTM..UU HK..2RS
metric NAO NAO NAF NA0 HK..ZWD HK..-ZW TLAW..Z HK..ZW
NAO..T2 NAO..-TV NAF..N NAO..TN HK..D HK..-AS1 BTM..OH
NAO..ZW NAO..-ZW-ASR1 NAFW NA0 HMK TAW..Z BHTM
RNA49..S PNA PNA HMK..L BHTM..U
NA49..S
metric HMK..L/LL BHTM..UU
HMK..ZWD TAW..Z
HKS TA..Z
HCK TAW
BK BK TLAM BK MKM BK
BK..T2 BK..-TV BK..TN
BK..L BK..-RS BK..RS
Inner rings BK..ZWD BK..-ZW TLAMW
BKS TAM
DCL SCE BA..Z BT
NTN INA IKO SKF KOYO NADELLA DCL..T2 SCE..-TV
1R IR IRT IR IM JR inch DCL..L SCE..-P
metric
1R..D IR..-IS1 IR..-IS1 DCL..LL SCE..-PP
inch MI (pouce) PI, LR IRB LR DCH SCH BAM BHT

Combined bearings

NTN INA IKO SKF KOYO NADELLA

ARN ZARN AXNA
AXN IRB AXNB
NKX NKX NAX NKX
NKX..Z NKX..Z NAX…Z NKX..Z
NKX+IR NKXR+IR NAXI
NKX..Z+IR NKXR..Z+IR NAXI..Z
metric
NKXR NKXR NBX NKXR RAXZ
NKXR..Z NKXR..Z NBX…Z NKXR..Z
NKXR..+IR NKXR..+IR NBXI
NKXR..Z+IR NKXR..Z+IR NBXI..Z
NKIA59 NKIA NATA59 NKIA
NKIB59..R NKIB NATB59 NKIB

With You 80
 NEEDLE ROLLER BEARINGS INTERCHANGE

Roller followers Needle and roller thrust bearings

NTN INA IKO SKF KOYO NADELLA NTN INA IKO SKF KOYO NADELLA
RNAB2 RSTO RNAST..R RSTO RSTO RNA..B
RNAB2..X RSTO..XX RNAST RSTO..DZ AXK (tole) AXK NTB AXK TP, AXK
RNA22..LL RNA22..-2RSR RNA22..2RSX AXK (laiton) AXK NTB AXK TP
RNA22..XLL RNA22..-2RSR-X RNA22..2RS
NAB2 STO NAST..R STO STO K811 K811 AZK K811 K811
NAB2..X STO..X NAST STO..X STO..DZ K811..T2 K811..-TV K811..TN
metric
NA22..LL NA22..-2RSR NA..2RS NA22..2RS
NA22..XLL NA22..-2RSR-X NA..2RSX K811..JW
NATR NATR NART..R NATR CXM..R, NATR K812 K812 AZK K812 K812
NATR..X NATR..X NART NATR..X CXM, NATR..DZ
NATR..LL NATR..-PP NATR..PPA CXM..UUR K812..T2 K812..-TV K812..TN
NATR..XLL NATR..XPP NATR..PP CXM..UU
K812..JW
NATV NATV NART..VR NATV CYM..R FG
NATV..X NATV..X NATV..X CYM FGL K874 K893 K893
NATV..LL NATV..PP NART..VUUR NATV..PPA CYM..UUR FG..EE
metric K893 K894 K894
NATV..XLL NATV..PPX FGL..EE
NUTR NUTR NURT NUTR NUTR FGU AS11 AS AS AS W, AS CP
NUTR..X NUTR..X NURT..DZ NUTR..X FGUL
inch WS811/WS812 / WS811/WS812 /
NUTW WS WS WS
NUTW..X WS874 /WS893 WS874 /WS893
NACV RF..Y CRY..VR
NACV..X RF CRY..V GS811/GS812 / GS811/GS812 /
GS GS GS
NACV..LL RF..YPP CRY..VUUR GS874 /GS893 GS893 /GS894
NACV..XLL RF..PP CRY..VUU
811 811 AZ 811 811
812 812 812 812
874 893 893
893 894 894
NTC TC
inch NWA TWA
Cam followers NWB TWB

NTN INA IKO SKF KOYO NADELLA

KR KR CF..R KR KM..R, KR
KR..X KR..X CF KR..X KM, KR..DZ
KR..H KR..SK CF..BR KR..SK
KR..XH KR..X, KR..SKX CF..B
KR..LL KR..PP CF..UUR KR..PPA KM..UUR, KR..2RS
KR..LLH KR..PP, KR..PPSK CF..BUUR KR..PPSK
KR..XLL KR..XPP CF..UU KR..XPP KR…DZ.2RS
KR..XLLH KR..-X-PPSK CF..BUU KM..UU ACCESSORIES
KRT CF-RU1
KRT..X
KRT..LL NTN INA IKO SKF KOYO NADELLA
KRT..XLL
KRV KRV CF..VR KRV CM..R GC
KRV..X KRV..X CF..VR KRV..X GCL
KRV..H CF..VBR KRV..SK
KRV..LL KRV..-PP CF..VUUR KRV..PPA CM..UUR GC..EE Needles
KRV..XLL KRV..XPP CF..VUU KRV..XPP CM..UU GCL..EE
KRV..PPSK,
KRV..LLH CF..VBUUR KRV..PPSK F NRB F RN..BF LF BP
KRV..PP
KRV..XPPSK, A A RN..B A BR
KRV..XLLH CF..VBUU
KRV..XPP
metric KRVT
KRVT..LL
KRVT..XLL Snap rings
KRU CFES..R
KRU..X CFES
KRU..LL CFES..UUR WR WR WR SW
KRU..XLL CFES..UU metric
KRVU CFES..V BR BR AR BR
KRVU..X CFES..VR
KRVU..XLL CFES..VUU
KRVU..LL
KRMV..XH
CFES..VUUR
CFS..V
Seals
KRM..XH CFS
KRX CF..SFU G G OS GS
NUKR NUKR NUCF..R NUKR DKM..R NUKR..2SK
NUKR..X DKM..DZ GD GR DS SD
NUKR..XH
NUKRT
NUKRT..X
NUKRU
NUKRU..X
CR CR..R
CR..X CR
CR..H CR..BR
CR..XH CR..B
CR..LL CR..UUR
CR..XLL CR..UU
CR..LLH CR..BUUR
CR..XLLH CR..BUU
inch
CRV CF CR..VR
CRV..X CR..V CR
CRV..H CR..VBR
CRV..XH CR..VB
CRV..LL CF..-PP CR..VUUR
CRV..XLL CF..-X-PP CR..VUU
CRV..LLH CR..VBUUR
CRV..XLLH CR..VBUU

81 With You
NOTES

With You 82
83 With You
 NEEDLE
ROLLER BEARINGS
The reference range made in Japan

DOC.I_NRB_CAT1.GBa - SAP 412 445 - Document non contractuel - NTN-SNR copyright international - 03/18 - Photos: NTN-SNR - PedroStudioPhoto - Shutterstock.

This document is the exclusive property of NTN-SNR ROULEMENTS. Any total or partial reproduction hereof without the
prior consent of NTN-SNR ROULEMENTS is strictly prohibited. Legal action may be brought against anyone breaching the
terms of this paragraph.
NTN-SNR ROULEMENTS shall not be held liable for any errors or omissions that may have crept into this document despite
the care taken in drafting it. Due to our policy of continuous research and development, we reserve the right to make changes
without notice to all or part of the products and specifications mentioned in this document.
© NTN-SNR ROULEMENTS, international copyright 2018.

NTN-SNR ROULEMENTS - 1 rue des Usines - 74000 Annecy

RCS ANNECY B 325 821 072 - Code APE 2815Z - Code NACE 28.15
www.ntn-snr.com