Scribd
Upload
80 views3 pages

RF Optimization Processes

This document summarizes the key activities involved in an RF optimization process for a telecom network. The process involves setting criteria and KPI targets, conducting a baseline audit, identifying coverage and capacity issues, analyzing problems through KPIs and root cause analysis, and conducting a parameter audit. The deliverables include comparing baseline and post-implementation results and network parameter reports with recommendations.

Uploaded by

SamehTaresh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
80 views3 pages

RF Optimization Processes

This document summarizes the key activities involved in an RF optimization process for a telecom network. The process involves setting criteria and KPI targets, conducting a baseline audit, identifying coverage and capacity issues, analyzing problems through KPIs and root cause analysis, and conducting a parameter audit. The deliverables include comparing baseline and post-implementation results and network parameter reports with recommendations.

Uploaded by

SamehTaresh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

TelecomStudy18

RF Optimization Processes
-
October 10, 2014

Network
Optimization process involves the following activities:

FIRST SET THE CRITERION (GOAL) OF OPTIMIZATION PROCESS


BASELINE & TARGET KPI’s.
DELIVERABLES
CONDUCTING A BASELINE PHYSICAL AUDIT
REMOVING ALL SERVICE AFFECTING ALARMS
IDENTIFYING POOR COVERAGE AREAS
IDENTIFYING CAPACITY CONSTRAINTS &
OVERUTILIZED CELLS
VARIOUS KPIs with Root-Cause-Analysis of
problems.
Frequency Plan (BCCH & TCH)
Neighbor plan
CONDUCTING A GSM SYSTEM PARAMETERS AUDIT
Deliverables of an Optimization activity:
Baseline Drive test comparison with post
implementation
results.
Statistical comparison of baseline &
improved network.
Parameter Audit report.
Physical parameter inconsistencies.
Frequency & neighbor plan inconsistencies
Recommendations for
Coverage
Capacity
Physical Optimization
Location Area Optimization.

GSM
LTE
WCDMA
Popular posts from this blog

Troubleshooting for GSM KPIs (SD Block & SD


Drop)
-
April 24, 2015

KPIs to be monitored: ·             SD Blocking ·             SD Drop SDCCH


Channel: ·    SDCCH channel is a dedicated channel which is using for
LAC updation, Call Setup, SMS in Ideal mode. It works in UL & DL SD …

READ MORE

Ericsson 2G OSS Command


-
October 10, 2014

Command Description RLDHP:CELL=ALL; CELL DYNAMIC HR


ALLOCATION DATA DBTSP:TAB=AXEPARS; DATABASE TABLE FILE
PRINTOUT STATUS PLLDP; PROCESSOR LOAD DATA RAEPP:ID=ALL;…

READ MORE

RXLEV in GSM
-
April 06, 2014

RXLEV is a number from 0 to 63 that corresponds


to a dBm value range. 0 represents the weakest
signal and 63 the strongest   RSSI below -110 dBm…

READ MORE


Powered by Blogger

Theme images by Michael Elkan


Archive

Labels

Search Postal Code


https://www.countryzipcode.com

You might also like