VIPER WRL
MINI MK II - MID MK II - MAXI MK II
SEAL - SCRAPER - VRC - SELECTION GUIDE
SEAL SELECTION SCRAPER ROPE CLEANER (VRC) SELECTION
Viper seals are designed to have some interference SELECTION Viper Rope Cleaners* enable the removal of
with the rope, depending on its size and type, with an contamination or built up old lubricant from
interference of up to 3mm allowable for standard 6 & 8 Viper recommend that wire ropes be the wire rope prior to lubrication, improving
strand ropes. For compact, non-rotating or wireline type physically measured prior to ordering the effectiveness of the lubrication process
ropes which do not have valleys, a maximum interference seals and scrapers as ropes in service via the Viper WRL.
of 1mm is recommended as these ropes do not allow for may vary in size. Scrapers are supplied
For certain types of wire ropes where the
the same amount of seal deflection within the collar. slightly larger than the actual wire rope
standard Viper Rope Cleaner is not suitable, the
size to allow for rope flexing.
Viper ‘Smooth Bore’ rope cleaner is available.
The Smooth Bore Rope Cleaner would typically
be used on those ropes with a large number
of outer strands, some non-rotational ropes,
ROV cables, etc, where the valleys between the
strands are minimal and do not readily facilitate
a standard Viper Rope Cleaner.
*VRC available as a single unit or pack of 5
IMPORTANT - BEFORE YOU ORDER
PHYSICALLY DETERMINE LAY OF ROPES DETERMINE THE STRAND TYPE
1. MEASURE ROPES 2. 3.
It is critical that all ropes
be physically measured
prior to selecting and
ordering the VRC, as ropes Right Lay Left Lay 6 Strand 8 Strand Armoured or
size may vary in service. Clockwise Rotation Counter Clockwise Multi Strand
CORRECT INCORRECT Rotation
The following tables allow for the quick and easy selection of the correct VRC to suit your specific requirements.
SUPERIOR PROTECTION FOR WIRE ROPES | www.viperwrl.com | Phone +61 2 9636 5655 1
MINI MK II
SEAL - SCRAPER - VRC - SELECTION GUIDE
VIPER MINI MK II
IMPORTANT This Column is for
This Column is for
CHOOSE CORRECT Armoured or
6 or 8 Strand
ROPE TYPE Multi Strand
Ropes Only
PRIOR TO ORDERING Ropes Only
Viper Seals/Scrapers for 6 & 8 Viper Seals/Scraper for Amoured Viper Viper Rope Cleaner Viper Rope Cleaner
Actual Rope Size Strand Ropes Only & Multi Strand Ropes Only Smooth Bore 6 Strand Ropes* 8 Strand Ropes*
Seal Part No. Seal Part No. Rope Cleaner Right Lay Left Lay Right Lay Left Lay
6mm to 7mm
VMISEAL6 VMISEAL8 N/A N/A N/A N/A NA
15/64” to 9/32”
8mm to 10mm
VMISEAL8 VMISEAL10 VRC-SB9 N/A N/A N/A NA
5/16” to 3/8”
11mm to 12mm
VMISEAL10 VMISEAL13 VRC-SB11 N/A N/A N/A NA
7/16” to 15/32”
13mm to 14mm
VMISEAL13 VMISEAL14 VRC-SB13 N/A N/A N/A NA
½” to 9/16”
15mm to 16mm
VMISEAL14 VMISEAL16 VRC-SB15 VRC16-6R VRC16-6L N/A NA
19/32” to 5/8”
17mm to 18mm
VMISEAL16 VMISEAL18 VRC-SB17 VRC18-6R VRC18-6L N/A NA
21/32” to 11/16”
19mm to 20mm
VMISEAL18 VMISEAL20 VRC-SB19 VRC20-6R VRC20-6L N/A NA
¾” to 25/32”
21mm to 22mm
VMISEAL20 VMISEAL22 VRC-SB21 VRC-22-6R VRC22-6L N/A NA
13/16” to 7/8”
23mm to 24mm
VMISEAL22 VMISEAL24 VRC-SB23 VRC24-6R VRC24-6L VRC24-8R VRC24-8L
29/32” to 15/16”
25mm to 26mm
VMISEAL24 VMISEAL26 VRC-SB25 VRC26-6R VRC26-6L VRC26-8R VRC26-8L
1” to 1-1/32”
27mm to 28mm
VMISEAL26 VMISEAL28 VRC-SB27 VRC28-6R VRC28-6L VRC28-8R VRC28-8L
1-1/16” to 1-1/8”
29mm to 30mm
VMISEAL28 VMISEAL30 VRC-SB29 VRC30-6R VRC30-6L VRC30-8R VRC30-8L
1 5/32” to 1 3/16”
31mm to 33mm
VMISEAL30 VMISEAL33 VRC-SB32 VRC32-6R VRC32-6L VRC32-8R VRC32-8L
1-¼” to 1-5/16”
34mm to 36mm
VMISEAL33 VMISEAL35 VRC-SB34 VRC34-6R VRC34-6L VRC34-8R VRC34-8L
1-11/32” to 1-13/32”
* VRC available as a single unit or pack of 5. For 5 pack part number add ‘Pack’ to the end of the single part number. Eg VRC24-6R-Pack
SUPERIOR PROTECTION FOR WIRE ROPES | www.viperwrl.com | Phone +61 2 9636 5655 2
MID MK II
SEAL - SCRAPER - VRC - SELECTION GUIDE
VIPER MID MK II
IMPORTANT These Columns for
These Columns for
CHOOSE CORRECT Armoured or
6 or 8 Strand
ROPE TYPE Multi Strand
Ropes Only
PRIOR TO ORDERING Ropes Only
Viper Seals/Scrapers for 6 & 8 Viper Seals/Scraper for Amoured Viper Viper Rope Cleaner Viper Rope Cleaner
Actual Rope Size Strand Ropes Only & Multi Strand Ropes Only Smooth Bore 6 Strand Ropes* 8 Strand Ropes*
Seal Part No. Scraper No. Seal Part No. Scraper No. Rope Cleaner Right Lay Left Lay Right Lay Left Lay
6mm to 7mm
VSEAL6 VSC8 VSEAL8 VSC8 N/A N/A N/A N/A N/A
15/64” to 9/32”
8mm to 10mm
VSEAL8 VSC10 VSEAL10 VSC10 VRC-SB9 N/A N/A N/A N/A
5/16” to 3/8”
11mm to 12mm
VSEAL10 VSC12 VSEAL13 VSC12 VRC-SB11 N/A N/A N/A N/A
7/16” to 15/32”
13mm to 14mm
VSEAL13 VSC14 VSEAL14 VSC14 VRC-SB13 N/A N/A N/A N/A
½” to 9/16”
15mm to 16mm
VSEAL14 VSC16 VSEAL16 VSC16 VRC-SB15 VRC16-6R VRC16-6L N/A N/A
19/32” to 5/8”
17mm to 18mm
VSEAL16 VSC18 VSEAL18 VSC18 VRC-SB17 VRC18-6R VRC18-6L N/A N/A
21/32” to 11/16”
19mm to 20mm
VSEAL18 VSC20 VSEAL20 VSC20 VRC-SB19 VRC20-6R VRC20-6L N/A N/A
¾” to 25/32”
21mm to 22mm
VSEAL20 VSC22 VSEAL22 VSC22 VRC-SB21 VRC22-6R VRC22-6L N/A N/A
13/16” to 7/8”
23mm to 24mm
VSEAL22 VSC24 VSEAL24 VSC24 VRC-SB23 VRC24-6R VRC24-6L VRC24-8R VRC24-8L
29/32” to 15/16”
25mm to 26mm
VSEAL24 VSC26 VSEAL26 VSC26 VRC-SB25 VRC26-6R VRC26-6L VRC26-8R VRC26-8L
1” to 1-1/32”
27mm to 28mm
VSEAL26 VSC28 VSEAL28 VSC28 VRC-SB27 VRC28-6R VRC28-6L VRC28-R8 VRC28-8L
1-1/16” to 1-1/8”
29mm to 30mm
VSEAL28 VSC30 VSEAL30 VSC30 VRC-SB29 VRC30-6R VRC30-6L VRC30-8R VRC30-8L
1 5/32” to 1 3/16”
31mm to 33mm
VSEAL30 VSC34 VSEAL33 VSC34 VRC-SB32 VRC32-6R VRC32-6L VRC32-8R VRC32-8L
1-¼” to 1-5/16”
34mm to 35mm
VSEAL33 VSC36 VSEAL35 VSC36 VRC-SB34 VRC34-6R VRC34-6L VRC34-8R VRC34-8L
1-11/32” to 1-3/8”
Continued on next page * VRC available as a single unit or pack of 5. For 5 pack part number add ‘Pack’ to the end of the single part number. Eg VRC24-6R-Pack
SUPERIOR PROTECTION FOR WIRE ROPES | www.viperwrl.com | Phone +61 2 9636 5655 3
MID MK II CONT.
SEAL - SCRAPER - VRC - SELECTION GUIDE
VIPER MID MK II
IMPORTANT These Columns for
These Columns for
CHOOSE CORRECT Armoured or
6 or 8 Strand
ROPE TYPE Multi Strand
Ropes Only
PRIOR TO ORDERING Ropes Only
Viper Seals/Scrapers for 6 & 8 Viper Seals/Scraper for Amoured Viper Viper Rope Cleaner Viper Rope Cleaner
Actual Rope Size Strand Ropes Only & Multi Strand Ropes Only Smooth Bore 6 Strand Ropes* 8 Strand Ropes*
Seal Part No. Scraper No. Seal Part No. Scraper No. Rope Cleaner Right Lay Left Lay Right Lay Left Lay
36mm to 37mm
VSEAL35 VSC38 VSEAL38 VSC38 VRC-SB37 VRC36-6R VRC36-6L VRC36-8R VRC36-8L
1-13/32” to 1-29/64”
38mm to 39mm
VSEAL38 VSC41 VSEAL41 VSC41 VRC-SB37 VRC36-6R VRC36-6L VRC36-8R VRC36-8L
1-½” to 1-17/32”
40mm to 41mm
VSEAL38 VSC41 VSEAL41 VSC41 VRC-SB39 VRC40-6R VRC40-6L VRC40-8R VRC40-8L
1-37/64” to 1-19/32”
42mm to 44mm
VSEAL41 VSC44 VSEAL44 VSC44 VRC-SB43 VRC44-6R VRC44-6L VRC44-8R VRC44-8L
1-5/8” to 1-¾”
45mm to 46mm
VSEAL44 VSC46 VSEAL46 VSC46 VRC-SB45 VRC46-6R VRC46-6L VRC46-8R VRC46-8L
1-25/32” to 1-13/16”
47mm to 48mm
VSEAL46 VSC48 VSEAL48 VSC48 VRC-SB47 VRC48-6R VRC48-6L VRC48-8R VRC48-8L
1-27/32” to 1-7/8”
49mm to 50mm
VSEAL48 VSC50 VSEAL50 VSC50 VRC-SB49 VRC50-6R VRC50-6L VRC50-8R VRC50-8L
1-15/16” to 1-31/32”
51mm to 53mm
VSEAL50 VSC53 VSEAL53 VSC53 VRC-SB52 VRC52-6R VRC52-6L VRC52-8R VRC52-8L
2” 2-3/32”
54mm to 55mm
VSEAL53 VSC55 VSEAL55 VSC55 VRC-SB54 VRC54-6R VRC54-6L VRC54-8R VRC54-8L
2-1/8”n to 2-5/32”
56mm 58mm
VSEAL55 VSC58 VSEAL58 VSC58 VMRC-SB57 VMRC58-6R VMRC58-6L VMRC58-8R VMRC58-8L
2-3/16” to 2-9/32”
59mm to 60mm
VSEAL58 VSC60 VSEAL60 VSC60 VMRC-SB59 VMRC60-6R VMRC60-6L VMRC60-8R VMRC60-8L
2-5/16” to 2-3/8”
61mm to 63mm
VSEAL60 VSC63 VSEAL63 VSC63 VMRC-SB62 VMRC62-6R VMRC62-6L VMRC62-8R VMRC62-8L
2-13/32” to 2-½”
64mm to 65mm
VSEAL63 VSC65 VSEAL65 VSC65 VMRC-SB64 VMRC64-6R VMRC64-6L VMRC64-8R VMRC64-8L
2-½” to 2-9/16”
66mm to 67mm
VSEAL65 VSC67 N/A N/A VMRC-SB66 VMRC66-6R VMRC66-6L VMRC66-8R VMRC66-8L
2-19/32” to 2-5/8”
* VRC available as a single unit or pack of 5. For 5 pack part number add ‘Pack’ to the end of the single part number. Eg VRC24-6R-Pack
SUPERIOR PROTECTION FOR WIRE ROPES | www.viperwrl.com | Phone +61 2 9636 5655 4
MAXI MK II
SEAL - SCRAPER - VRC - SELECTION GUIDE
VIPER MAXI MK II
IMPORTANT These Columns for
These Columns for Multi-Strand Rope Cleaners
CHOOSE CORRECT Armoured or for ropes over 65mm are available on request,
6 or 8 Strand
ROPE TYPE Multi Strand eg: 18/21 Strand Ropes
Ropes Only
PRIOR TO ORDERING Ropes Only minimum order qualities may be applicable
Viper Seals/Scrapers for 6 & 8 Viper Seals/Scraper for Amoured Viper Viper Rope Cleaner Viper Rope Cleaner
Actual Rope Size Strand Ropes Only & Multi Strand Ropes Only Smooth Bore 6 Strand Ropes* 8 Strand Ropes*
Seal Part No. Scraper No. Seal Part No. Scraper No. Rope Cleaner Right Lay Left Lay Right Lay Left Lay
49mm to50mm
VMMSEAL48 VMMSC50 VMMSEAL50 VMMSC50 VRC-SB49 VRC50-6R VRC50-6L VRC50-8R VRC50-8L
1-15/16” to 1-31/32”
51mm to53mm
VMMSEAL50 VMMSC53 VMMSEAL53 VMMSC53 VRC-SB52 VRC52-6R VRC52-6L VRC52-8R VRC52-8L
2” to2-3/32”
54mm to 55mm
VMMSEAL53 VMMSC55 VMMSEAL55 VMMSC55 VRC-SB54 VRC54-6R VRC54-6L VRC54-8R VRC54-8L
2-1/8” to 2-5/32”
56mm to58mm
VMMSEAL55 VMMSC58 VMMSEAL58 VMMSC58 VMRC-SB57 VMRC58-6R VMRC58-6L VMRC58-8R VMRC58-8L
2-3/16” to 2-3/32”
59mm to 60mm
VMMSEAL58 VMMSC60 VMMSEAL60 VMMSC60 VMRC-SB59 VMRC60-6R VMRC60-6L VMRC60-8R VMRC60-8L
2-5/16” to 2-3/8”
61mm to 63mm
VMMSEAL60 VMMSC63 VMMSEAL63 VMMSC63 VMRC-SB62 VMRC62-6R VMRC62-6L VMRC62-8R VMRC62-8L
2-13/32” to 2-½”
64mm to 65mm
VMMSEAL63 VMMSC65 VMMSEAL65 VMMSC65 VMRC-SB64 VMRC64-6R VMRC64-6L VMRC64-8R VMRC64-8L
2-½” to 2-9/16”
66mm to 67mm
VMMSEAL65 VMMSC67 VMMSEAL68 VMMSC67 VMRC-SB66 VMRC66-6R VMRC66-6L VMRC66-8R VMRC66-8L
2 19/32” to 2 5/8”
68mm to 70mm
VMMSEAL68 VMMSC70 VMMSEAL70 VMMSC70 VMRC-SB69 VMRC70-6R VMRC70-6L VMRC70-8R VMRC70-8L
2-21/32” to 2-¾”
71mm to 73mm
VMMSEAL70 VMMSC73 VMMSEAL74 VMMSC73 VMRC-SB72 VMRC72-6R VMRC72-6L VMRC72-8R VMRC72-8L
2-13/16” to 2-7/8”
74mm to 75mm
VMMSEAL74 VMMSC75 VMMSEAL76 VMMSC75 VMRC-SB74 VMRC74-6R VMRC74-6L VMRC74-8R VMRC74-8L
2 27/32” to 2 15/16”
76mm to 77mm
VMMSEAL76 VMMSC77 VMMSEAL78 VMMSC77 VMRC-SB76 VMRC76-6R VMRC76-6L VMRC76-8R VMRC76-8L
2-31/32” to 3”
78mm to 79mm
VMMSEAL78 VMMSC79 VMMSEAL80 VMMSC79 VMRC-SB78 VMRC78-6R VMRC78-6L VMRC78-8R VMRC78-8L
3 3/64” to 3 5/64”
80mm to 82mm
VMMSEAL80 VMMSC82 VMMSEAL83 VMMSC82 VMRC-SB80 VMRC82-6R VMRC82-6L VMRC82-8R VMRC82-8L
3-1/8” to 3-13/64”
Continued on next page * VRC available as a single unit or pack of 5. For 5 pack part number add ‘Pack’ to the end of the single part number. Eg VRC24-6R-Pack
SUPERIOR PROTECTION FOR WIRE ROPES | www.viperwrl.com | Phone +61 2 9636 5655 5
MAXI MK II CONT.
SEAL - SCRAPER - VRC - SELECTION GUIDE
VIPER MAXI MK II
IMPORTANT These Columns for
These Columns for Multi-Strand Rope Cleaners
CHOOSE CORRECT Armoured or for ropes over 65mm are available on request,
6 or 8 Strand
ROPE TYPE Multi Strand eg: 18/21 Strand Ropes
Ropes Only
PRIOR TO ORDERING Ropes Only minimum order qualities may be applicable
Viper Seals/Scrapers for 6 & 8 Viper Seals/Scraper for Amoured Viper Viper Rope Cleaner Viper Rope Cleaner
Actual Rope Size Strand Ropes Only & Multi Strand Ropes Only Smooth Bore 6 Strand Ropes* 8 Strand Ropes*
Seal Part No. Scraper No. Seal Part No. Scraper No. Rope Cleaner Right Lay Left Lay Right Lay Left Lay
83mm to 85mm
VMMSEAL83 VMMSC85 VMMSEAL86 VMMSC85 VMRC-SB84 VMRC84-6R VMRC84-6L VMRC84-8R VMRC84-8L
3-15/64” to 3-5/16”
86mm to 88mm
VMMSEAL86 VMMSC88 VMMSEAL90 VMMSC88 VMRC-SB87 VMRC88-6R VMRC88-6L VMRC88-8R VMRC88-8L
3-23/64" to 3-7/16"
89mm to 91mm
VMMSEAL90 VMMSC91 VMMSEAL92 VMMSC91 VMRC-SB90 VMRC90-6R VMRC90-6L VMRC90-8R VMRC90-8L
3-15/32" to 3-½”
92mm to 94mm
VMMSEAL92 VMMSC94 VMMSEAL94 VMMSC94 VMRC-SB93 VMRC92-6R VMRC92-6L VMRC92-R8 VMRC92-8L
3-21/32” to 3-5/8”
94mm to 95mm
VMMSEAL94 VMMSC94 VMMSEAL96 VMMSC94 VMRC-SB94 VMRC94-6R VMRC94-6L VMRC94-8R VMRC94-8L
3-11/16” to 3-11/16”
96mm to 97mm
VMMSEAL96 VMMSC97 VMMSEAL98 VMMSC97 VMRC-SB96 VMRC96-6R VMRC96-6L VMRC96-8R VMRC96-8L
3-¾” to 3-13/16”
98mm to 99mm
VMMSEAL98 VMMSC99 VMMSEAL100 VMMSC99 VMRC-SB98 VMRC98-6R VMRC98-6L VMRC98-8R VMRC98-8L
3-7/32” to 3-7/8”
100mm to 102mm
VMMSEAL100 VMMSC102 VMMSEAL103 VMMSC102 VMRC-SB101 VMRC102-6R VMRC102-6L VMRC102-8R VMRC102-8L
3-29”/32” to 3-15/16”
103mm to 105mm
VMMSEAL103 VMMSC105 VMMSEAL106 VMMSC105 VMMRC-SB104 VMMRC104-6R VMMRC104-6L VMMRC104-8R VMMRC104-8L
4” to 4-3/32”
106mm to 108mm
VMMSEAL106 VMMSC108 VMMSEAL109 VMMSC108 VMMRC-SB107 VMMRC108-6R VMMRC108-6L VMMRC108-8R VMMRC108-8L
4-1/8” to 4-7/32"
109mm to 111mm
VMMSEAL109 VMMSC111 VMMSEAL112 VMMSC111 VMMRC-SB110 VMMRC110-6R VMMRC110-6L VMMRC110-8L VMMRC110-8L
4-¼” to 4-9/32”
112mm to 114mm
VMMSEAL112 VMMSC111 VMMSEAL115 VMMSC111 VMMRC-SB113 VMMRC112-6R VMMRC112-6L VMMRC112-8L VMMRC112-8L
4 3/8” to 4 7/16”
115mm to 116mm
VMMSEAL115 VMMSC116 VMMSEAL117 VMMSC116 VMMRC-SB115 VMMRC116-6R VMMRC116-6L VMMRC116-8R VMMRC116-8L
4-½” to 4-17/32”
117mm to 119mm
VMMSEAL117 VMMSC119 VMMSEAL120 VMMSC119 VMMRC-SB118 VMMRC118-6R VMMRC118-6L VMMRC118-8R VMMRC118-8L
4-9/16” to 4-5/8”
Continued on next page * VRC available as a single unit or pack of 5. For 5 pack part number add ‘Pack’ to the end of the single part number. Eg VRC24-6R-Pack
SUPERIOR PROTECTION FOR WIRE ROPES | www.viperwrl.com | Phone +61 2 9636 5655 6
MAXI MK II CONT.
SEAL - SCRAPER - VRC - SELECTION GUIDE
VIPER MAXI MK II
IMPORTANT These Columns for
These Columns for Multi-Strand Rope Cleaners
CHOOSE CORRECT Armoured or for ropes over 65mm are available on request,
6 or 8 Strand
ROPE TYPE Multi Strand eg: 18/21 Strand Ropes
Ropes Only
PRIOR TO ORDERING Ropes Only minimum order qualities may be applicable
Viper Seals/Scrapers for 6 & 8 Viper Seals/Scraper for Amoured Viper Viper Rope Cleaner Viper Rope Cleaner
Actual Rope Size Strand Ropes Only & Multi Strand Ropes Only Smooth Bore 6 Strand Ropes* 8 Strand Ropes*
Seal Part No. Scraper No. Seal Part No. Scraper No. Rope Cleaner Right Lay Left Lay Right Lay Left Lay
120mm to 122mm
VMMSEAL120 VMMSC122 VMMSEAL123 VMMSC122 VMMRC-SB121 VMMRC122-R6 VMMRC122-6L VMMRC122-8R VMMRC122-8L
4-11/16” to 4-¾”
123mm to 125mm
VMMSEAL123 VMMSC125 VMMSEAL126 VMMSC125 VMMRC-SB124 VMMRC124-6R VMMRC124-6L VMMRC124-8R VMMRC124-8L
4-13/16” to 4-7/8”
126mm to 128mm
VMMSEAL126 VMMSC128 VMMSEAL129 VMMSC128 VMMRC-SB127 VMMRC128-6R VMMRC128-6L VMMRC128-R8 VMMRC128-8L
4-15/16” to 5”
129mm to 131mm
VMMSEAL129 VMMSC131 VMMSEAL132 VMMSC131 VMMRC-SB130 VMMRC130-6R VMMRC130-6L VMMRC130-8R VMMRC130-8L
5-1/32” to 5-7/64”
132mm to 134mm
VMMSEAL132 VMMSC134 VMMSEAL135 VMMSC134 VMMRC-SB133 VMMRC134-6R VMMRC134-6L VMMRC134-8R VMMRC134-8L
5-1/8” to 5-¼”
135mm to 137mm
VMMSEAL135 VMMSC137 VMMSEAL138 VMMSC137 VMMRC-SB136 VMMRC136-6R VMMRC136-6L VMMRC136-8R VMMRC136-8L
5-9/32” to 5-5/16”
138mm to 140mm
VMMSEAL138 VMMSC140 VMMSEAL141 VMMSC140 VMMRC-SB139 VMMRC140-6R VMMRC140-6L VMMRC140-8R VMMRC140-8L
5-3/8” to 5-7/16”
141mm to 143mm
VMMSEAL141 VMMSC143 VMMSEAL144 VMMSC143 VMMRC-SB142 VMMRC142-6R VMMRC142-6L VMMRC142-8R VMMRC142-8L
5-½” to 5-9/16”
144mm to 146mm
VMMSEAL144 VMMSC146 VMMSEAL147 VMMSC146 VMMRC-SB145 VMMRC146-6R VMMRC146-6L VMMRC146-8R VMMRC146-8L
5-5/8” to 5-11/16”
147mm to 149mm
VMMSEAL147 VMMSC149 VMMSEAL150 VMMSC149 VMMRC-SB148 VMMRC148-6R VMMRC148-6L VMMRC148-8R VMMRC148-8L
5-¾” to 5-13/16”
150mm to 152mm
VMMSEAL150 VMMSC152 VMMSEAL153 VMMSC152 VMMRC-SB151 VMMRC152-6R VMMRC152-6L VMMRC152-8R VMMRC152-8L
5-7/8” to 5-15/16”
153mm to 155mm
VMMSEAL153 VMMSC155 VMMSEAL156 VMMSC155 VMMRC-SB154 VMMRC154-6R VMMRC154-6L VMMRC154-R8 VMMRC154-8L
6” to 6-1/16”
156mm to 158mm
VMMSEAL156 VMMSC158 VMMSEAL159 VMMSC158 VMMRC-SB157 VMMRC158-6R VMMRC158-6L VMMRC158-8R VMMRC158-8L
6-3/32” to 6-3/16”
159mm to 161mm
VMMSEAL159 VMMSC161 VMMSEAL162 VMMSC161 VMMRC-SB160 VMMRC160-6R VMMRC160-6L VMMRC160-8R VMMRC160-8L
6-1/4" to 6-5/16"
162mm to 165mm
VMMSEAL162 VMMSC165 VMMSEAL165 VMMSC165 VMMRC-SB163 VMMRC164-6R VMMRC164-6L VMMRC164-8R VMMRC164-8L
6-3/8" to 6-1/2"
* VRC available as a single unit or pack of 5. For 5 pack part number add ‘Pack’ to the end of the single part number. Eg VRC24-6R-Pack
SUPERIOR PROTECTION FOR WIRE ROPES | www.viperwrl.com | Phone +61 2 9636 5655
VIP-SELECGUIDE-1020-V1
7
