TWI enrolment form TRA05/EX07 Doc 1 Rev.

25 Page 1 of 4

PLEASE SEND THE COMPLETED FORM OR A PHOTOCOPY WITH Please tick:

YOUR PAYMENT AND THE NECESSARY ENCLOSURES TO: ☐
✔ Self-sponsored ☐ Company sponsored

TWI (India) Private Limited Methods of Payment

No 65/90 Ellaiamman Colony, Full payment and / or Company Order no. must accompany this booking form.
Vellala,Teynampet, Bookings received without payment / order Number will be treated as provisional,
Chennai, 600086 which does not guarantee a place.
Tamil Nadu, India.
Ph: 044-43189691/2/3/4 Beneficiary name: TWI INDIA PRIVATE LIMITED
E-mail: [email protected] Beneficiary account number: 50200022166828
Website: www.twiindia.com Beneficiary Bank Address: HDFC, DLF IT, SEZ BLOCK 5,
SHIVAJI GARDEN, BLOCK 5 GROUND FLOOR, SHIVAJI GARDENS, CHENNAI
- 600089, TAMIL NADU
Personal Information (PLEASE USE CAPITAL LETTERS THROUGHOUT) IFSC CODE: HDFC0001869
SWIFT CODE: HDFCINBBCHE
TWI Candidate ID Number:
(If known)

Event title or Company order No: _____________________________________

CSWIP 3.1
Approving manager’s
Event date 23.07.2021 name: _____________________________________
Name of the Candidate (as required on the certificate)
ADI ARUNCHALAM
Sponsor’s signature:
D D M M Y Y Y Y
Date of Birth 3 1 / 0 7 / 1 9 9 5

Permanent private address

(Handwritten signature required)

1, THIRUKOVILUR ROAD LANE

TIRUVANNAMALAI, TAMILNADU Venue (Handwritten

✔ India SriLanka Nepal

Postcode: 606601 Car Reg. No
Bangladesh Myanmar
Private Tel.: +91 9095944500
Emergency
Tel.: +91 9003500124
Where did you hear about TWI Ltd?
E-mail: [email protected]

✔
☐ TWI Corporate Website ☐ LinkedIn
Correspondence address (if different from above)
☐
✔ CSWIP Website ☐ Facebook

☐ Email marketing ☐ NDT News / Insight

☐ Bulletin / Connect ☐ Exhibitions / Events

☐ Google search ☐ Word of Mouth

Invoice address (if different from below) ☐ Other (please specify)

GDPR statement

✔
☐ Please tick the box if you are happy for TWI to send you information
regarding TWI training events and career progression opportunities.
We will not share your data with anyone else.

Sponsoring Company and Address Please note for examination candidates only:
As part of the certification process, candidate contact details will be passed
to the relevant Certification body to enable completion of the certification
process.
Postcode: Please tick if you are
Contact Name:
Tel.: Fax: ☐ a member of The Welding & Joining Society
E-mail: ☐ an employee of an Industrial Member of TWI

Do you have a disability or any special needs

Yes ☐ No ☐
✔ Internal Use Only
relevant to this course or examination?
Booking Ref:
(If yes, please let us know details of any adjustments you may require).
TWI enrolment form TRA05/EX07 Doc 1 Rev. 25 Page 2 of 4

Section 1: Examination Applied For (to be completed in full by all applicants)

Examination retest of a previously failed

☐ Initial ☐ supplementary ☐ renewal ☐ bridging ☐
✔
Type examination

Examination
☐
✔ CSWIP ☐ PCN ☐ AWS ☐ BGAS ☐ ASNT
Body

PCN or BGAS Approval Number: 345825

Current CSWIP qualifications held:

Section 2: CSWIP Welding Inspection examination (to be completed in full by all candidates for Welding Inspection Examinations)
Please by ticking the box indicate the examination of your choice

☐ VWI (3.0) ☐
✔ WI (3.1) ☐ SWI (3.2.1) ☐ SWI (3.2.2) ☐ AWSCSWIP

☐ Endorsement ☐ Instructor ☐ Supervisor ☐ QC Coordinator ☐ ASME IX

Pre-certification experience
CSWIP Welding Inspection Scheme document stipulates the minimum requirements on the industrial pre-certification experience. Compliance with these
requirements is an essential part of the eligibility criteria. Please refer to the latest version of the scheme document published on the CSWIP website.

Please tick relevant box (this must be signed and verified by an employer/third party)

VWI Although there is no specific experience requirement it is recommended that candidates possess a minimum of six months’ welding related
(3.0) engineering experience and two years industrial experience.

Welding Inspector for a minimum of 3 years with experience related to the duties and responsibilities listed in Clause 1.2.2 under
☐
✔ qualified supervision, independently verified.
WI
(3.1) ☐ Certified Visual Welding Inspector for a minimum of 2 years with job responsibilities in the areas listed in 1.2.1 and 1.2.2.

☐ Welding Instructor or Welding Foreman/Supervisor for a minimum of 1 year.

SWI ☐ Certified Welding Inspector for a minimum of 2 years with job responsibilities in the areas listed in 1.2.1, 1.2.2 and 1.2.3.
(3.2.1 & 3.2.2)
☐ 5 years' authenticated experience related to the duties and responsibilities listed in Clause 1.2.3, independently verified.

A current valid CSWIP 3.2 Senior Welding Inspector certification plus three years documented experience related to the duties and
☐ responsibilities or an international equivalent.
Welding
QC coordinator
A current valid CSWIP 3.1 Welding Inspector with 10 year’s documented experience related to the duties and responsibilities or an
☐ international equivalent.

☐ Hold current valid Senior Welding Inspector or international equivalent.

☐ Certified Welding Inspector with five years relevant verified work experience or international equivalent
ASME IX
☐ A HNC in Welding Fabrication

Working in quality control function related to welding activities with five years of verified working experience (this could relate to a CSWIP
☐ WI (3.1) holder

Please give a detailed statement of how you meet the requirements (this must be signed and verified by an employer/third party)

Parent material Welding consumables identity, Pre-weld inspection, in-process Colding surveillanceWitnessing of welder and procedure
approval tests, Welder approvals, Post weld heat treatment, Preparation of inspection reports

Section 3: Underwater Inspection (to be completed in full by all candidates for CSWIP Underwater Inspection Examinations)
Please by ticking the box indicate the examination of your choice

☐ 3.1U ☐ 3.2U ☐ 3.3U ☐ 3.4U ☐ A-SCAN ☐ Concrete

Pre-certification experience
CSWIP Underwater Inspection Scheme document stipulates the minimum requirements on the industrial pre-certification experience. Compliance with these
requirements is an essential part of the eligibility criteria. Please refer to the latest version of the scheme document published on the CSWIP website.

Evidence of experience shall be completed using form EX07 – please contact TWI Customer Services for the relevant form.
TWI enrolment form TRA05/EX07 Doc 1 Rev. 25 Page 3 of 4

Section 4: NDT examination (to be completed in full by all candidates for CSWIP NDT Examinations)

Please tick relevant box in each section – Method, Level, Industrial sector and (where appropriate) UT category

Method

☐ PT ☐ MT ☐ VT ☐ ET ☐ ACFM

☐ RT ☐ Rad Interpret ☐ CR/DR ☐ CRI / DRI ☐ BRS ☐ RPS

☐ UT ☐ PAUT ☐ TOFD ☐ AUT ☐ UTCM ☐ PACM

☐ Appreciation ☐ Basic ☐ Phasor DM

Level

☐ Level 1 ☐ Level 2 ☐ Level 3

Industrial sector & category

Industry Sector ☐ General ☐

✔ Welds ☐ Castings ☐ Wrought ☐ Forgings ☐ Tubes & Pipes ☐ Aero

UT Categories ☐ 3.1 ☐ 3.2 ☐ 3.7 ☐ 3.8 ☐ 3.9 ☐ Critical sizing

Industrial experience
Experience is not an essential pre-requisite for examination. However, if such evidence is available at the time of examination, it should be provided direct to
the Examination Centre. Experience satisfying the requirements detailed in CSWIP or PCN documents may be gained following examination. Once evidence of
experience satisfying these requirements is accumulated, it should be sent to Customer Services. Please use the form NDT 15A (CSWIP) or PSL/30 (PCN).

Section 5: Plant Inspection (to be completed in full by all candidates for CSWIP Plant Inspection Examinations)

Please by ticking the box indicate the examination of your choice

☐ Level 1 ☐ Level 2 ☐ Level 3 ☐ Endorsement

Pre-certification experience
CSWIP Plant Inspection Scheme document stipulates the minimum requirements on the industrial pre-certification experience. Compliance with these
requirements is an essential part of the eligibility criteria. Please refer to the latest version of scheme document published on the CSWIP website.

Please tick relevant box (this must be signed and verified by an employer/third party)

☐ I hold current approved NDT Level 2 (ACCP, CSWIP, PCN or ASNT) in two methods, one of which must be Ultrasonic
☐ I hold CSWIP Welding Inspector or higher
Plant inspection
Level 1 ☐ I hold HNC in Mechanical Engineering or equivalent
I have a minimum of Five years, assessed and authenticated industry experience in this field (Mature Entry Route), a verified CV
☐
can be supplied – Must be Authenticated by Line Manager

Plant Inspection ☐ I hold a valid Level 1 Plant Inspector approval

Level 2 ☐ I have successfully completed the Level 1 exams as a pre entry requirement

Please give a detailed statement of how you meet the requirements (this must be signed and verified by an employer/third party)

Section 6: Other examinations (to be completed in full by all candidates for any other examinations)

Please tick and specify exam title as required

☐ Plastic welding ☐ Offshore visual Inspector ☐ BGAS

Examination title required:

Pre-certification experience
CSWIP and BGAS Scheme documents stipulates the minimum requirements on the industrial pre-certification experience. Compliance with these requirements
is an essential part of the eligibility criteria. Please refer to the latest version of scheme document published on the CSWIP website.

Please contact TWI Customer Services for advice on relevant forms and documentation required.
TWI enrolment form TRA05/EX07 Doc 1 Rev. 25 Page 4 of 4

Section 7: Candidate’s declaration (to be completed in full by all applicants)

I understand that TWI Ltd and its associated trading companies (and companies, organisations, or agents processing data on its behalf) will hold and use personal data supplied
by me for administration purposes as per GDPR requirements.

I agree to read the Health & Safety and Security information provided by TWI and to abide by the guidance given.

I understand that occasionally images of training and examinations are taken by TWI for publicity and other purposes and that permission for my inclusion in such material is implied
unless I make it known to Customer Services at registration that I do not wish to feature.

I confirm that I have read and comply with the pre examination entry requirements as laid down in the latest version of CSWIP Requirement Documents (available on CSWIP website)
and understand that any fraudulent claim may result in the retraction of any certificate issued. I have read and understood the documentation issued by the scheme management that is
relevant to the examination for which I am applying and declare that I satisfy those criteria covering vision, training and experience.

I accept responsibility for any examination fees in the event of non-payment by the sponsor. I agree to abide by the requirements for certification as relevant to the examination for which
I am applying. In particular I agree to comply, if applicable, with the CSWIP rules on use and misuse of certificates and on professional conduct (see www.cswip.com).

I understand that any appeal against an exam result must be received within six months of the exam date.

I agree to provide any additional documents and information required by examination body to support my enrolment.

I understand that any false statement may result in the examination being invalidated.

In the event of cancellation by you, the event fee and the accommodation fee (if applicable) will be returned less a cancellation charge of 20%. If less than 14 days’ notice is given by you,
TWI reserves the right to retain the whole fee. TWI reserves the right to cancel the event in case of insufficient registration or illness of lecturers. TWI will ensure maximum possible notice
is given to the attendees and reserves the right to substitute lecturers and modify the course details as required.

By signing this Enrolment form I confirm complete acceptance of the TWI Ltd Terms and Conditions of Training, copy available on request.

Candidate’s Signature:

(Handwritten signature required)

Section 8: Verification (to be completed in full by all applicant’s verifier)

Verification is an essential part of the exam eligibility process, and the verification contact details provided by the candidate will only be used to complete the
exam eligibility process. The verifier will not be contacted by TWI for any marketing or promotional purposes, and their details will not be shared to any party
outside TWI or CSWIP certification body.

Verifier details

Name (in capitals):

Company & position:
Professional relation
to the candidate:
Telephone no.:
Email Address:
Date: Authenticated Company Stamp

Verifier’s declaration:
To the best of my belief, the candidate’s statement given above is correct at the time of signing

Verifier’s Signature (employer’s or equivalent)

(Handwritten signature required)